OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@93cee0b9f619 (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@344	7	Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@166	13	using System.Globalization;
moel@228	14	using System.Threading;
moel@130	15	using OpenHardwareMonitor.Hardware.LPC;
moel@130	16
moel@130	17	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	18	internal class SuperIOHardware : Hardware {
moel@130	19
moel@195	20	private readonly Mainboard mainboard;
moel@195	21	private readonly ISuperIO superIO;
moel@130	22
moel@195	23	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	24	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	25	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	26	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	27
moel@228	28	private delegate float? ReadValueDelegate(int index);
moel@228	29	private delegate void UpdateDelegate();
moel@228	30
moel@228	31	// delegates for mainboard specific sensor reading code
moel@228	32	private readonly ReadValueDelegate readVoltage;
moel@228	33	private readonly ReadValueDelegate readTemperature;
moel@228	34	private readonly ReadValueDelegate readFan;
moel@323	35	private readonly ReadValueDelegate readControl;
moel@228	36
moel@228	37	// delegate for post update mainboard specific code
moel@228	38	private readonly UpdateDelegate postUpdate;
moel@228	39
moel@228	40	// mainboard specific mutex
moel@228	41	private readonly Mutex mutex;
moel@228	42
moel@176	43	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	44	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	45	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	46	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	47	settings)
moel@130	48	{
moel@176	49	this.mainboard = mainboard;
moel@130	50	this.superIO = superIO;
moel@130	51
moel@228	52	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	53	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	54	this.readFan = (index) => superIO.Fans[index];
moel@323	55	this.readControl = (index) => superIO.Controls[index];
moel@228	56
moel@228	57	this.postUpdate = () => { };
moel@228	58
moel@130	59	List<Voltage> v = new List<Voltage>();
moel@130	60	List<Temperature> t = new List<Temperature>();
moel@130	61	List<Fan> f = new List<Fan>();
moel@323	62	List<Ctrl> c = new List<Ctrl>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@353	65	case Chip.IT8705F:
moel@130	66	case Chip.IT8712F:
moel@130	67	case Chip.IT8716F:
moel@130	68	case Chip.IT8718F:
moel@177	69	case Chip.IT8720F:
moel@319	70	case Chip.IT8726F:
moel@130	71	switch (manufacturer) {
moel@133	72	case Manufacturer.ASUS:
moel@133	73	switch (model) {
moel@168	74	case Model.Crosshair_III_Formula: // IT8720F
moel@133	75	v.Add(new Voltage("VBat", 8));
moel@133	76	t.Add(new Temperature("CPU", 0));
moel@133	77	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	78	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	79	break;
moel@144	80	case Model.M2N_SLI_DELUXE:
moel@133	81	v.Add(new Voltage("CPU VCore", 0));
moel@133	82	v.Add(new Voltage("+3.3V", 1));
moel@195	83	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	84	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	85	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	86	v.Add(new Voltage("VBat", 8));
moel@133	87	t.Add(new Temperature("CPU", 0));
moel@133	88	t.Add(new Temperature("Motherboard", 1));
moel@133	89	f.Add(new Fan("CPU Fan", 0));
moel@133	90	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	91	f.Add(new Fan("Power Fan", 2));
moel@133	92	break;
moel@168	93	case Model.M4A79XTD_EVO: // IT8720F
moel@195	94	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	95	v.Add(new Voltage("VBat", 8));
moel@144	96	t.Add(new Temperature("CPU", 0));
moel@144	97	t.Add(new Temperature("Motherboard", 1));
moel@144	98	f.Add(new Fan("CPU Fan", 0));
moel@144	99	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	100	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	101	break;
moel@133	102	default:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	105	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	106	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	107	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	108	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	109	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	110	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	111	v.Add(new Voltage("VBat", 8));
moel@133	112	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	113	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	114	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	115	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	116	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	117	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@133	118	break;
moel@133	119	}
moel@133	120	break;
moel@221	121
moel@221	122	case Manufacturer.ASRock:
moel@221	123	switch (model) {
moel@221	124	case Model.P55_Deluxe: // IT8720F
moel@228	125
moel@221	126	v.Add(new Voltage("CPU VCore", 0));
moel@221	127	v.Add(new Voltage("+3.3V", 2));
moel@221	128	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	129	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	130	v.Add(new Voltage("VBat", 8));
moel@221	131	t.Add(new Temperature("CPU", 0));
moel@221	132	t.Add(new Temperature("Motherboard", 1));
moel@221	133	f.Add(new Fan("CPU Fan", 0));
moel@221	134	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	135
moel@228	136	// this mutex is also used by the official ASRock tool
moel@228	137	mutex = new Mutex(false, "ASRockOCMark");
moel@228	138
moel@228	139	bool exclusiveAccess = false;
moel@228	140	try {
moel@228	141	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	142	} catch (AbandonedMutexException) { }
moel@228	143	catch (InvalidOperationException) { }
moel@228	144
moel@228	145	// only read additional fans if we get exclusive access
moel@228	146	if (exclusiveAccess) {
moel@228	147
moel@228	148	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	149	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	150	f.Add(new Fan("Power Fan", 4));
moel@228	151
moel@228	152	readFan = (index) => {
moel@228	153	if (index < 2) {
moel@228	154	return superIO.Fans[index];
moel@228	155	} else {
moel@228	156	// get GPIO 80-87
moel@228	157	byte? gpio = superIO.ReadGPIO(7);
moel@228	158	if (!gpio.HasValue)
moel@228	159	return null;
moel@228	160
moel@228	161	// read the last 3 fans based on GPIO 83-85
moel@228	162	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	163	return (((gpio.Value >> 3) & 0x07) ==
moel@228	164	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	165	}
moel@228	166	};
moel@228	167
moel@228	168	int fanIndex = 0;
moel@228	169	postUpdate = () => {
moel@228	170	// get GPIO 80-87
moel@228	171	byte? gpio = superIO.ReadGPIO(7);
moel@228	172	if (!gpio.HasValue)
moel@228	173	return;
moel@228	174
moel@228	175	// prepare the GPIO 83-85 for the next update
moel@228	176	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	177	superIO.WriteGPIO(7,
moel@228	178	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	179	fanIndex = (fanIndex + 1) % 3;
moel@228	180	};
moel@228	181	}
moel@228	182
moel@221	183	break;
moel@221	184	default:
moel@221	185	v.Add(new Voltage("CPU VCore", 0));
moel@221	186	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	187	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	188	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	189	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	190	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	191	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	192	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	193	v.Add(new Voltage("VBat", 8));
moel@221	194	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	195	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	196	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	197	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	198	break;
moel@221	199	};
moel@221	200	break;
moel@221	201
moel@130	202	case Manufacturer.DFI:
moel@130	203	switch (model) {
moel@168	204	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	205	v.Add(new Voltage("CPU VCore", 0));
moel@130	206	v.Add(new Voltage("FSB VTT", 1));
moel@130	207	v.Add(new Voltage("+3.3V", 2));
moel@195	208	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	209	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	210	v.Add(new Voltage("NB Core", 5));
moel@130	211	v.Add(new Voltage("VDIMM", 6));
moel@195	212	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	213	v.Add(new Voltage("VBat", 8));
moel@130	214	t.Add(new Temperature("CPU", 0));
moel@130	215	t.Add(new Temperature("System", 1));
moel@130	216	t.Add(new Temperature("Chipset", 2));
moel@130	217	f.Add(new Fan("Fan #1", 0));
moel@130	218	f.Add(new Fan("Fan #2", 1));
moel@130	219	f.Add(new Fan("Fan #3", 2));
moel@130	220	break;
moel@168	221	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	222	v.Add(new Voltage("CPU VCore", 0));
moel@130	223	v.Add(new Voltage("VTT", 1));
moel@130	224	v.Add(new Voltage("+3.3V", 2));
moel@195	225	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	226	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	227	v.Add(new Voltage("CPU PLL", 5));
moel@130	228	v.Add(new Voltage("DRAM", 6));
moel@195	229	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	230	v.Add(new Voltage("VBat", 8));
moel@130	231	t.Add(new Temperature("Chipset", 0));
moel@130	232	t.Add(new Temperature("CPU PWM", 1));
moel@130	233	t.Add(new Temperature("CPU", 2));
moel@130	234	f.Add(new Fan("Fan #1", 0));
moel@130	235	f.Add(new Fan("Fan #2", 1));
moel@130	236	f.Add(new Fan("Fan #3", 2));
moel@130	237	break;
moel@130	238	default:
moel@130	239	v.Add(new Voltage("CPU VCore", 0));
moel@130	240	v.Add(new Voltage("VTT", 1, true));
moel@130	241	v.Add(new Voltage("+3.3V", 2, true));
moel@130	242	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	243	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	244	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	245	v.Add(new Voltage("DRAM", 6, true));
moel@130	246	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	247	v.Add(new Voltage("VBat", 8));
moel@130	248	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	249	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	250	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	251	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	252	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	253	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	254	break;
moel@130	255	}
moel@130	256	break;
moel@130	257
moel@130	258	case Manufacturer.Gigabyte:
moel@130	259	switch (model) {
moel@168	260	case Model._965P_S3: // IT8718F
moel@130	261	v.Add(new Voltage("CPU VCore", 0));
moel@130	262	v.Add(new Voltage("DRAM", 1));
moel@130	263	v.Add(new Voltage("+3.3V", 2));
moel@195	264	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	265	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	266	v.Add(new Voltage("VBat", 8));
moel@130	267	t.Add(new Temperature("System", 0));
moel@130	268	t.Add(new Temperature("CPU", 1));
moel@130	269	f.Add(new Fan("CPU Fan", 0));
moel@130	270	f.Add(new Fan("System Fan", 1));
moel@130	271	break;
moel@168	272	case Model.EP45_DS3R: // IT8718F
moel@130	273	case Model.EP45_UD3R:
moel@138	274	case Model.X38_DS5:
moel@130	275	v.Add(new Voltage("CPU VCore", 0));
moel@130	276	v.Add(new Voltage("DRAM", 1));
moel@130	277	v.Add(new Voltage("+3.3V", 2));
moel@195	278	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	279	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	280	v.Add(new Voltage("VBat", 8));
moel@130	281	t.Add(new Temperature("System", 0));
moel@130	282	t.Add(new Temperature("CPU", 1));
moel@130	283	f.Add(new Fan("CPU Fan", 0));
moel@130	284	f.Add(new Fan("System Fan #2", 1));
moel@130	285	f.Add(new Fan("Power Fan", 2));
moel@130	286	f.Add(new Fan("System Fan #1", 3));
moel@130	287	break;
moel@357	288	case Model.EX58_EXTREME: // IT8720F
moel@133	289	v.Add(new Voltage("CPU VCore", 0));
moel@133	290	v.Add(new Voltage("DRAM", 1));
moel@195	291	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	292	v.Add(new Voltage("VBat", 8));
moel@133	293	t.Add(new Temperature("System", 0));
moel@133	294	t.Add(new Temperature("CPU", 1));
moel@138	295	t.Add(new Temperature("Northbridge", 2));
moel@133	296	f.Add(new Fan("CPU Fan", 0));
moel@133	297	f.Add(new Fan("System Fan #2", 1));
moel@133	298	f.Add(new Fan("Power Fan", 2));
moel@133	299	f.Add(new Fan("System Fan #1", 3));
moel@133	300	break;
moel@168	301	case Model.P35_DS3: // IT8718F
moel@168	302	case Model.P35_DS3L: // IT8718F
moel@130	303	v.Add(new Voltage("CPU VCore", 0));
moel@130	304	v.Add(new Voltage("DRAM", 1));
moel@130	305	v.Add(new Voltage("+3.3V", 2));
moel@195	306	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	307	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	308	v.Add(new Voltage("VBat", 8));
moel@130	309	t.Add(new Temperature("System", 0));
moel@130	310	t.Add(new Temperature("CPU", 1));
moel@130	311	f.Add(new Fan("CPU Fan", 0));
moel@130	312	f.Add(new Fan("System Fan #1", 1));
moel@130	313	f.Add(new Fan("System Fan #2", 2));
moel@130	314	f.Add(new Fan("Power Fan", 3));
moel@130	315	break;
moel@168	316	case Model.P55_UD4: // IT8720F
moel@357	317	case Model.P55A_UD3: // IT8720F
moel@357	318	case Model.P55M_UD4: // IT8720F
moel@357	319	case Model.H55_USB3: // IT8720F
moel@357	320	case Model.EX58_UD3R: // IT8720F
moel@148	321	v.Add(new Voltage("CPU VCore", 0));
moel@148	322	v.Add(new Voltage("DRAM", 1));
moel@148	323	v.Add(new Voltage("+3.3V", 2));
moel@195	324	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	325	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@148	326	v.Add(new Voltage("VBat", 8));
moel@148	327	t.Add(new Temperature("System", 0));
moel@148	328	t.Add(new Temperature("CPU", 2));
moel@148	329	f.Add(new Fan("CPU Fan", 0));
moel@148	330	f.Add(new Fan("System Fan #2", 1));
moel@148	331	f.Add(new Fan("Power Fan", 2));
moel@148	332	f.Add(new Fan("System Fan #1", 3));
moel@148	333	break;
moel@357	334	case Model.H55N_USB3: // IT8720F
moel@154	335	v.Add(new Voltage("CPU VCore", 0));
moel@154	336	v.Add(new Voltage("DRAM", 1));
moel@154	337	v.Add(new Voltage("+3.3V", 2));
moel@195	338	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	339	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@357	340	v.Add(new Voltage("VBat", 8));
moel@357	341	t.Add(new Temperature("System", 0));
moel@357	342	t.Add(new Temperature("CPU", 2));
moel@357	343	f.Add(new Fan("CPU Fan", 0));
moel@357	344	f.Add(new Fan("System Fan", 1));
moel@357	345	break;
moel@357	346	case Model.G41M_Combo: // IT8718F
moel@357	347	case Model.G41MT_S2: // IT8718F
moel@357	348	case Model.G41MT_S2P: // IT8718F
moel@357	349	v.Add(new Voltage("CPU VCore", 0));
moel@357	350	v.Add(new Voltage("DRAM", 1));
moel@357	351	v.Add(new Voltage("+3.3V", 2));
moel@357	352	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	353	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@357	354	v.Add(new Voltage("VBat", 8));
moel@357	355	t.Add(new Temperature("CPU", 2));
moel@357	356	f.Add(new Fan("CPU Fan", 0));
moel@357	357	f.Add(new Fan("System Fan", 1));
moel@357	358	break;
moel@382	359	case Model.GA_970A_UD3: // IT8720F
moel@382	360	v.Add(new Voltage("CPU VCore", 0));
moel@382	361	v.Add(new Voltage("DRAM", 1));
moel@382	362	v.Add(new Voltage("+3.3V", 2));
moel@382	363	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@382	364	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@382	365	v.Add(new Voltage("VBat", 8));
moel@382	366	t.Add(new Temperature("System", 0));
moel@382	367	t.Add(new Temperature("CPU", 1));
moel@382	368	f.Add(new Fan("CPU Fan", 0));
moel@382	369	f.Add(new Fan("System Fan #1", 1));
moel@382	370	f.Add(new Fan("System Fan #2", 2));
moel@382	371	f.Add(new Fan("Power Fan", 4));
moel@382	372	c.Add(new Ctrl("PWM 1", 0));
moel@382	373	c.Add(new Ctrl("PWM 2", 1));
moel@382	374	c.Add(new Ctrl("PWM 3", 2));
moel@382	375	break;
moel@357	376	case Model.GA_MA770T_UD3: // IT8720F
moel@359	377	case Model.GA_MA770T_UD3P: // IT8720F
moel@357	378	case Model.GA_MA790X_UD3P: // IT8720F
moel@357	379	v.Add(new Voltage("CPU VCore", 0));
moel@357	380	v.Add(new Voltage("DRAM", 1));
moel@357	381	v.Add(new Voltage("+3.3V", 2));
moel@357	382	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	383	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@154	384	v.Add(new Voltage("VBat", 8));
moel@154	385	t.Add(new Temperature("System", 0));
moel@154	386	t.Add(new Temperature("CPU", 1));
moel@154	387	f.Add(new Fan("CPU Fan", 0));
moel@154	388	f.Add(new Fan("System Fan #1", 1));
moel@154	389	f.Add(new Fan("System Fan #2", 2));
moel@154	390	f.Add(new Fan("Power Fan", 3));
moel@154	391	break;
moel@359	392	case Model.GA_MA78LM_S2H: // IT8718F
moel@359	393	v.Add(new Voltage("CPU VCore", 0));
moel@359	394	v.Add(new Voltage("DRAM", 1));
moel@359	395	v.Add(new Voltage("+3.3V", 2));
moel@359	396	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@359	397	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@359	398	v.Add(new Voltage("VBat", 8));
moel@359	399	t.Add(new Temperature("System", 0));
moel@359	400	t.Add(new Temperature("CPU", 1));
moel@359	401	t.Add(new Temperature("VRM", 2));
moel@359	402	f.Add(new Fan("CPU Fan", 0));
moel@359	403	f.Add(new Fan("System Fan #1", 1));
moel@359	404	f.Add(new Fan("System Fan #2", 2));
moel@359	405	f.Add(new Fan("Power Fan", 3));
moel@359	406	break;
moel@357	407	case Model.GA_MA785GM_US2H: // IT8718F
moel@168	408	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	409	v.Add(new Voltage("CPU VCore", 0));
moel@130	410	v.Add(new Voltage("DRAM", 1));
moel@130	411	v.Add(new Voltage("+3.3V", 2));
moel@195	412	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	413	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@130	414	v.Add(new Voltage("VBat", 8));
moel@130	415	t.Add(new Temperature("System", 0));
moel@130	416	t.Add(new Temperature("CPU", 1));
moel@130	417	f.Add(new Fan("CPU Fan", 0));
moel@130	418	f.Add(new Fan("System Fan", 1));
moel@130	419	f.Add(new Fan("NB Fan", 2));
moel@130	420	break;
moel@168	421	case Model.X58A_UD3R: // IT8720F
moel@138	422	v.Add(new Voltage("CPU VCore", 0));
moel@138	423	v.Add(new Voltage("DRAM", 1));
moel@138	424	v.Add(new Voltage("+3.3V", 2));
moel@195	425	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	426	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@138	427	v.Add(new Voltage("VBat", 8));
moel@138	428	t.Add(new Temperature("System", 0));
moel@138	429	t.Add(new Temperature("CPU", 1));
moel@138	430	t.Add(new Temperature("Northbridge", 2));
moel@138	431	f.Add(new Fan("CPU Fan", 0));
moel@138	432	f.Add(new Fan("System Fan #2", 1));
moel@138	433	f.Add(new Fan("Power Fan", 2));
moel@138	434	f.Add(new Fan("System Fan #1", 3));
moel@138	435	break;
moel@130	436	default:
moel@130	437	v.Add(new Voltage("CPU VCore", 0));
moel@130	438	v.Add(new Voltage("DRAM", 1, true));
moel@130	439	v.Add(new Voltage("+3.3V", 2, true));
moel@130	440	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	441	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	442	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	443	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	444	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	445	v.Add(new Voltage("VBat", 8));
moel@130	446	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	447	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	448	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	449	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	450	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	451	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	452	break;
moel@130	453	}
moel@130	454	break;
moel@130	455
moel@130	456	default:
moel@130	457	v.Add(new Voltage("CPU VCore", 0));
moel@130	458	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	459	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	460	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	461	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	462	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	463	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	464	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	465	v.Add(new Voltage("VBat", 8));
moel@130	466	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	467	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	468	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	469	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	470	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	471	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	472	break;
moel@130	473	}
moel@130	474	break;
moel@170	475
moel@170	476	case Chip.IT8721F:
moel@277	477	case Chip.IT8728F:
moel@341	478	case Chip.IT8771E:
moel@319	479	case Chip.IT8772E:
moel@177	480	switch (manufacturer) {
moel@177	481	case Manufacturer.ECS:
moel@177	482	switch (model) {
moel@177	483	case Model.A890GXM_A: // IT8721F
moel@177	484	v.Add(new Voltage("CPU VCore", 0));
moel@177	485	v.Add(new Voltage("VDIMM", 1));
moel@177	486	v.Add(new Voltage("NB Voltage", 2));
moel@195	487	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	488	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	489	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	490	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	491	t.Add(new Temperature("CPU", 0));
moel@177	492	t.Add(new Temperature("System", 1));
moel@177	493	t.Add(new Temperature("Northbridge", 2));
moel@177	494	f.Add(new Fan("CPU Fan", 0));
moel@177	495	f.Add(new Fan("System Fan", 1));
moel@177	496	f.Add(new Fan("Power Fan", 2));
moel@177	497	break;
moel@177	498	default:
moel@177	499	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	500	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	501	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	502	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	503	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	504	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	505	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	506	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	507	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	508	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	509	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	510	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	511	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	512	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	513	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@177	514	break;
moel@177	515	}
moel@177	516	break;
moel@278	517	case Manufacturer.Gigabyte:
moel@278	518	switch (model) {
moel@357	519	case Model.H61M_DS2_REV_1_2: // IT8728F
moel@357	520	case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@357	521	v.Add(new Voltage("VTT", 0));
moel@357	522	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@278	523	v.Add(new Voltage("CPU VCore", 5));
moel@278	524	v.Add(new Voltage("DRAM", 6));
moel@278	525	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	526	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	527	t.Add(new Temperature("System", 0));
moel@278	528	t.Add(new Temperature("CPU", 2));
moel@278	529	f.Add(new Fan("CPU Fan", 0));
moel@357	530	f.Add(new Fan("System Fan", 1));
moel@278	531	break;
moel@290	532	case Model.H67A_UD3H_B3: // IT8728F
moel@357	533	case Model.H67A_USB3_B3: // IT8728F
moel@290	534	v.Add(new Voltage("VTT", 0));
moel@290	535	v.Add(new Voltage("+5V", 1, 15, 10));
moel@357	536	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@290	537	v.Add(new Voltage("CPU VCore", 5));
moel@290	538	v.Add(new Voltage("DRAM", 6));
moel@290	539	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290	540	v.Add(new Voltage("VBat", 8, 10, 10));
moel@290	541	t.Add(new Temperature("System", 0));
moel@290	542	t.Add(new Temperature("CPU", 2));
moel@290	543	f.Add(new Fan("CPU Fan", 0));
moel@290	544	f.Add(new Fan("System Fan #1", 1));
moel@290	545	f.Add(new Fan("Power Fan", 2));
moel@290	546	f.Add(new Fan("System Fan #2", 3));
moel@290	547	break;
moel@357	548	case Model.Z68A_D3H_B3: // IT8728F
moel@357	549	v.Add(new Voltage("VTT", 0));
moel@357	550	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	551	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	552	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357	553	v.Add(new Voltage("CPU VCore", 5));
moel@357	554	v.Add(new Voltage("DRAM", 6));
moel@357	555	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357	556	v.Add(new Voltage("VBat", 8, 10, 10));
moel@357	557	t.Add(new Temperature("System", 0));
moel@357	558	t.Add(new Temperature("CPU", 2));
moel@357	559	f.Add(new Fan("CPU Fan", 0));
moel@357	560	f.Add(new Fan("System Fan #1", 1));
moel@357	561	f.Add(new Fan("Power Fan", 2));
moel@357	562	f.Add(new Fan("System Fan #2", 3));
moel@357	563	break;
moel@357	564	case Model.P67A_UD3_B3: // IT8728F
moel@357	565	case Model.P67A_UD3R_B3: // IT8728F
moel@357	566	case Model.P67A_UD4_B3: // IT8728F
moel@357	567	case Model.Z68AP_D3: // IT8728F
moel@357	568	case Model.Z68X_UD3H_B3: // IT8728F
moel@357	569	v.Add(new Voltage("VTT", 0));
moel@357	570	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	571	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	572	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357	573	v.Add(new Voltage("CPU VCore", 5));
moel@357	574	v.Add(new Voltage("DRAM", 6));
moel@357	575	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357	576	v.Add(new Voltage("VBat", 8, 10, 10));
moel@357	577	t.Add(new Temperature("System", 0));
moel@357	578	t.Add(new Temperature("CPU", 2));
moel@357	579	f.Add(new Fan("CPU Fan", 0));
moel@357	580	f.Add(new Fan("System Fan #2", 1));
moel@357	581	f.Add(new Fan("Power Fan", 2));
moel@357	582	f.Add(new Fan("System Fan #1", 3));
moel@357	583	break;
moel@305	584	case Model.Z68X_UD7_B3: // IT8728F
moel@305	585	v.Add(new Voltage("VTT", 0));
moel@357	586	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	587	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	588	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@305	589	v.Add(new Voltage("CPU VCore", 5));
moel@305	590	v.Add(new Voltage("DRAM", 6));
moel@305	591	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305	592	v.Add(new Voltage("VBat", 8, 10, 10));
moel@305	593	t.Add(new Temperature("System", 0));
moel@305	594	t.Add(new Temperature("CPU", 1));
moel@305	595	t.Add(new Temperature("System 3", 2));
moel@305	596	f.Add(new Fan("CPU Fan", 0));
moel@305	597	f.Add(new Fan("Power Fan", 1));
moel@305	598	f.Add(new Fan("System Fan #1", 2));
moel@305	599	f.Add(new Fan("System Fan #2", 3));
moel@305	600	f.Add(new Fan("System Fan #3", 4));
moel@305	601	break;
moel@278	602	default:
moel@278	603	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	604	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	605	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	606	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	607	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	608	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	609	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	610	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	611	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	612	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	613	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	614	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	615	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	616	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	617	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@278	618	break;
moel@278	619	}
moel@278	620	break;
moel@320	621	case Manufacturer.Shuttle:
moel@320	622	switch (model) {
moel@320	623	case Model.FH67: // IT8772E
moel@320	624	v.Add(new Voltage("CPU VCore", 0));
moel@320	625	v.Add(new Voltage("DRAM", 1));
moel@320	626	v.Add(new Voltage("PCH VCCIO", 2));
moel@320	627	v.Add(new Voltage("CPU VCCIO", 3));
moel@320	628	v.Add(new Voltage("Graphic Voltage", 4));
moel@320	629	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320	630	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	631	t.Add(new Temperature("System", 0));
moel@320	632	t.Add(new Temperature("CPU", 1));
moel@320	633	f.Add(new Fan("Fan #1", 0));
moel@320	634	f.Add(new Fan("CPU Fan", 1));
moel@320	635	break;
moel@320	636	default:
moel@320	637	v.Add(new Voltage("Voltage #1", 0, true));
moel@320	638	v.Add(new Voltage("Voltage #2", 1, true));
moel@320	639	v.Add(new Voltage("Voltage #3", 2, true));
moel@320	640	v.Add(new Voltage("Voltage #4", 3, true));
moel@320	641	v.Add(new Voltage("Voltage #5", 4, true));
moel@320	642	v.Add(new Voltage("Voltage #6", 5, true));
moel@320	643	v.Add(new Voltage("Voltage #7", 6, true));
moel@320	644	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320	645	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	646	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320	647	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320	648	for (int i = 0; i < superIO.Fans.Length; i++)
moel@320	649	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	650	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	651	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@320	652	break;
moel@320	653	}
moel@320	654	break;
moel@177	655	default:
moel@177	656	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	657	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	658	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	659	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	660	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	661	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	662	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	663	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	664	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	665	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	666	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	667	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	668	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	669	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	670	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@177	671	break;
moel@177	672	}
moel@170	673	break;
moel@130	674
moel@130	675	case Chip.F71858:
moel@195	676	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	677	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	678	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	679	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	680	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	681	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	682	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	683	break;
moel@130	684	case Chip.F71862:
moel@130	685	case Chip.F71869:
moel@130	686	case Chip.F71882:
moel@296	687	case Chip.F71889AD:
moel@130	688	case Chip.F71889ED:
moel@130	689	case Chip.F71889F:
moel@352	690	case Chip.F71808E:
moel@132	691	switch (manufacturer) {
moel@132	692	case Manufacturer.EVGA:
moel@132	693	switch (model) {
moel@168	694	case Model.X58_SLI_Classified: // F71882
moel@195	695	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	696	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	697	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	698	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	699	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	700	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	701	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	702	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	703	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	704	t.Add(new Temperature("CPU", 0));
moel@132	705	t.Add(new Temperature("VREG", 1));
moel@132	706	t.Add(new Temperature("System", 2));
moel@132	707	f.Add(new Fan("CPU Fan", 0));
moel@132	708	f.Add(new Fan("Power Fan", 1));
moel@132	709	f.Add(new Fan("Chassis Fan", 2));
moel@132	710	break;
moel@132	711	default:
moel@195	712	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	713	v.Add(new Voltage("CPU VCore", 1));
moel@132	714	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	715	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	716	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	717	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	718	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	719	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	720	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	721	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	722	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	723	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	724	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	725	break;
moel@132	726	}
moel@132	727	break;
moel@132	728	default:
moel@195	729	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	730	v.Add(new Voltage("CPU VCore", 1));
moel@132	731	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	732	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	733	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	734	v.Add(new Voltage("Voltage #6", 5, true));
moel@352	735	if (superIO.Chip != Chip.F71808E)
moel@352	736	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	737	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	738	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	739	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	740	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	741	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	742	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	743	break;
moel@132	744	}
moel@130	745	break;
moel@130	746
moel@220	747	case Chip.W83627EHF:
moel@220	748	switch (manufacturer) {
moel@220	749	case Manufacturer.ASRock:
moel@220	750	switch (model) {
moel@220	751	case Model.AOD790GX_128M: // W83627EHF
moel@220	752	v.Add(new Voltage("CPU VCore", 0));
moel@220	753	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	754	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	755	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	756	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	757	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	758	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	759	t.Add(new Temperature("CPU", 0));
moel@220	760	t.Add(new Temperature("Motherboard", 2));
moel@221	761	f.Add(new Fan("CPU Fan", 0));
moel@221	762	f.Add(new Fan("Chassis Fan", 1));
moel@220	763	break;
moel@220	764	default:
moel@220	765	v.Add(new Voltage("CPU VCore", 0));
moel@220	766	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	767	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	768	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	769	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	770	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	771	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	772	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	773	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	774	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	775	t.Add(new Temperature("CPU", 0));
moel@220	776	t.Add(new Temperature("Auxiliary", 1));
moel@220	777	t.Add(new Temperature("System", 2));
moel@220	778	f.Add(new Fan("System Fan", 0));
moel@220	779	f.Add(new Fan("CPU Fan", 1));
moel@220	780	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	781	f.Add(new Fan("CPU Fan #2", 3));
moel@220	782	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	783	break;
moel@220	784	} break;
moel@220	785	default:
moel@220	786	v.Add(new Voltage("CPU VCore", 0));
moel@220	787	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	788	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	789	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	790	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	791	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	792	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	793	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	794	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	795	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	796	t.Add(new Temperature("CPU", 0));
moel@220	797	t.Add(new Temperature("Auxiliary", 1));
moel@220	798	t.Add(new Temperature("System", 2));
moel@220	799	f.Add(new Fan("System Fan", 0));
moel@220	800	f.Add(new Fan("CPU Fan", 1));
moel@220	801	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	802	f.Add(new Fan("CPU Fan #2", 3));
moel@220	803	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	804	break;
moel@220	805	}
moel@130	806	break;
moel@130	807	case Chip.W83627DHG:
moel@130	808	case Chip.W83627DHGP:
moel@130	809	case Chip.W83667HG:
moel@130	810	case Chip.W83667HGB:
moel@152	811	switch (manufacturer) {
moel@153	812	case Manufacturer.ASRock:
moel@153	813	switch (model) {
moel@168	814	case Model._880GMH_USB3: // W83627DHG-P
moel@153	815	v.Add(new Voltage("CPU VCore", 0));
moel@195	816	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	817	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	818	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	819	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	820	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	821	t.Add(new Temperature("CPU", 0));
moel@153	822	t.Add(new Temperature("Motherboard", 2));
moel@153	823	f.Add(new Fan("Chassis Fan", 0));
moel@153	824	f.Add(new Fan("CPU Fan", 1));
moel@153	825	f.Add(new Fan("Power Fan", 2));
moel@153	826	break;
moel@153	827	default:
moel@153	828	v.Add(new Voltage("CPU VCore", 0));
moel@153	829	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	830	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	831	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	832	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	833	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	834	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	835	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	836	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	837	t.Add(new Temperature("CPU", 0));
moel@153	838	t.Add(new Temperature("Auxiliary", 1));
moel@153	839	t.Add(new Temperature("System", 2));
moel@153	840	f.Add(new Fan("System Fan", 0));
moel@153	841	f.Add(new Fan("CPU Fan", 1));
moel@153	842	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	843	f.Add(new Fan("CPU Fan #2", 3));
moel@153	844	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	845	break;
moel@153	846	}
moel@153	847	break;
moel@152	848	case Manufacturer.ASUS:
moel@152	849	switch (model) {
moel@336	850	case Model.P6T: // W83667HG
moel@174	851	case Model.P6X58D_E: // W83667HG
moel@174	852	case Model.Rampage_II_GENE: // W83667HG
moel@152	853	v.Add(new Voltage("CPU VCore", 0));
moel@195	854	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	855	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	856	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	857	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	858	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	859	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	860	t.Add(new Temperature("CPU", 0));
moel@174	861	t.Add(new Temperature("Motherboard", 2));
moel@174	862	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	863	f.Add(new Fan("CPU Fan", 1));
moel@174	864	f.Add(new Fan("Power Fan", 2));
moel@174	865	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	866	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	867	break;
moel@174	868	case Model.Rampage_Extreme: // W83667HG
moel@174	869	v.Add(new Voltage("CPU VCore", 0));
moel@195	870	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	871	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	872	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	873	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	874	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	875	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	876	t.Add(new Temperature("CPU", 0));
moel@152	877	t.Add(new Temperature("Motherboard", 2));
moel@152	878	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	879	f.Add(new Fan("CPU Fan", 1));
moel@153	880	f.Add(new Fan("Power Fan", 2));
moel@152	881	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	882	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	883	break;
moel@152	884	default:
moel@152	885	v.Add(new Voltage("CPU VCore", 0));
moel@152	886	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	887	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	888	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	889	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	890	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	891	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	892	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	893	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	894	t.Add(new Temperature("CPU", 0));
moel@152	895	t.Add(new Temperature("Auxiliary", 1));
moel@152	896	t.Add(new Temperature("System", 2));
moel@153	897	f.Add(new Fan("System Fan", 0));
moel@153	898	f.Add(new Fan("CPU Fan", 1));
moel@153	899	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	900	f.Add(new Fan("CPU Fan #2", 3));
moel@153	901	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	902	break;
moel@152	903	}
moel@152	904	break;
moel@152	905	default:
moel@152	906	v.Add(new Voltage("CPU VCore", 0));
moel@152	907	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	908	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	909	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	910	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	911	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	912	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	913	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	914	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	915	t.Add(new Temperature("CPU", 0));
moel@152	916	t.Add(new Temperature("Auxiliary", 1));
moel@152	917	t.Add(new Temperature("System", 2));
moel@153	918	f.Add(new Fan("System Fan", 0));
moel@153	919	f.Add(new Fan("CPU Fan", 1));
moel@153	920	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	921	f.Add(new Fan("CPU Fan #2", 3));
moel@153	922	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	923	break;
moel@152	924	}
moel@130	925	break;
moel@130	926	case Chip.W83627HF:
moel@130	927	case Chip.W83627THF:
moel@130	928	case Chip.W83687THF:
moel@130	929	v.Add(new Voltage("CPU VCore", 0));
moel@130	930	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	931	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	932	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	933	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	934	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	935	v.Add(new Voltage("VBAT", 6));
moel@130	936	t.Add(new Temperature("CPU", 0));
moel@130	937	t.Add(new Temperature("Auxiliary", 1));
moel@130	938	t.Add(new Temperature("System", 2));
moel@153	939	f.Add(new Fan("System Fan", 0));
moel@153	940	f.Add(new Fan("CPU Fan", 1));
moel@153	941	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	942	break;
moel@245	943	case Chip.NCT6771F:
moel@265	944	case Chip.NCT6776F:
moel@265	945	switch (manufacturer) {
moel@265	946	case Manufacturer.ASUS:
moel@265	947	switch (model) {
moel@312	948	case Model.P8P67: // NCT6776F
moel@311	949	case Model.P8P67_EVO: // NCT6776F
moel@265	950	case Model.P8P67_PRO: // NCT6776F
moel@265	951	v.Add(new Voltage("CPU VCore", 0));
moel@310	952	v.Add(new Voltage("+12V", 1, 11, 1));
moel@310	953	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	954	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310	955	v.Add(new Voltage("+5V", 4, 12, 3));
moel@310	956	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265	957	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310	958	t.Add(new Temperature("CPU", 0));
moel@276	959	t.Add(new Temperature("Auxiliary", 2));
moel@310	960	t.Add(new Temperature("Motherboard", 3));
moel@310	961	f.Add(new Fan("Chassis Fan #1", 0));
moel@265	962	f.Add(new Fan("CPU Fan", 1));
moel@310	963	f.Add(new Fan("Power Fan", 2));
moel@310	964	f.Add(new Fan("Chassis Fan #2", 3));
moel@323	965	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323	966	c.Add(new Ctrl("CPU Fan", 1));
moel@323	967	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265	968	break;
moel@276	969	case Model.P8P67_M_PRO: // NCT6776F
moel@276	970	v.Add(new Voltage("CPU VCore", 0));
moel@276	971	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	972	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	973	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276	974	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	975	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	976	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	977	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	978	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	979	t.Add(new Temperature("CPU", 0));
moel@276	980	t.Add(new Temperature("Motherboard", 3));
moel@276	981	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	982	f.Add(new Fan("CPU Fan", 1));
moel@276	983	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	984	f.Add(new Fan("Power Fan", 3));
moel@276	985	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	986	break;
moel@337	987	case Model.P8Z68_V_PRO: // NCT6776F
moel@337	988	v.Add(new Voltage("CPU VCore", 0));
moel@337	989	v.Add(new Voltage("+12V", 1, 11, 1));
moel@337	990	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337	991	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337	992	v.Add(new Voltage("+5V", 4, 12, 3));
moel@337	993	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337	994	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337	995	t.Add(new Temperature("CPU", 0));
moel@337	996	t.Add(new Temperature("Auxiliary", 2));
moel@337	997	t.Add(new Temperature("Motherboard", 3));
moel@337	998	for (int i = 0; i < superIO.Fans.Length; i++)
moel@337	999	f.Add(new Fan("Fan #" + (i + 1), i));
moel@337	1000	for (int i = 0; i < superIO.Controls.Length; i++)
moel@337	1001	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337	1002	break;
moel@332	1003	case Model.P9X79: // NCT6776F
moel@332	1004	v.Add(new Voltage("CPU VCore", 0));
moel@332	1005	v.Add(new Voltage("+12V", 1, 11, 1));
moel@332	1006	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332	1007	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332	1008	v.Add(new Voltage("+5V", 4, 12, 3));
moel@332	1009	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332	1010	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332	1011	t.Add(new Temperature("CPU", 0));
moel@332	1012	t.Add(new Temperature("Motherboard", 3));
moel@332	1013	for (int i = 0; i < superIO.Fans.Length; i++)
moel@332	1014	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	1015	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	1016	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@332	1017	break;
moel@265	1018	default:
moel@265	1019	v.Add(new Voltage("CPU VCore", 0));
moel@265	1020	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	1021	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	1022	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	1023	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	1024	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	1025	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	1026	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	1027	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	1028	t.Add(new Temperature("CPU Core", 0));
moel@354	1029	t.Add(new Temperature("Temperature #1", 1));
moel@354	1030	t.Add(new Temperature("Temperature #2", 2));
moel@354	1031	t.Add(new Temperature("Temperature #3", 3));
moel@265	1032	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	1033	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	1034	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	1035	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1036	break;
moel@265	1037	}
moel@265	1038	break;
moel@265	1039	default:
moel@265	1040	v.Add(new Voltage("CPU VCore", 0));
moel@265	1041	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	1042	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	1043	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	1044	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	1045	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	1046	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	1047	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	1048	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	1049	t.Add(new Temperature("CPU Core", 0));
moel@354	1050	t.Add(new Temperature("Temperature #1", 1));
moel@354	1051	t.Add(new Temperature("Temperature #2", 2));
moel@354	1052	t.Add(new Temperature("Temperature #3", 3));
moel@265	1053	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	1054	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	1055	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	1056	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1057	break;
moel@265	1058	}
moel@245	1059	break;
moel@356	1060	case Chip.NCT6779D:
moel@359	1061	switch (manufacturer) {
moel@359	1062	case Manufacturer.ASUS:
moel@359	1063	switch (model) {
moel@359	1064	case Model.P8Z77_V:
moel@359	1065	v.Add(new Voltage("CPU VCore", 0));
moel@359	1066	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1067	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1068	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1069	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1070	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1071	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1072	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1073	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1074	v.Add(new Voltage("VTT", 9));
moel@359	1075	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1076	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1077	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1078	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1079	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1080	t.Add(new Temperature("CPU Core", 0));
moel@359	1081	t.Add(new Temperature("Auxiliary", 1));
moel@359	1082	t.Add(new Temperature("Motherboard", 2));
moel@359	1083	f.Add(new Fan("Chassis Fan #1", 0));
moel@359	1084	f.Add(new Fan("CPU Fan", 1));
moel@359	1085	f.Add(new Fan("Chassis Fan #2", 2));
moel@359	1086	f.Add(new Fan("Chassis Fan #3", 3));
moel@359	1087	c.Add(new Ctrl("Chassis Fan #1", 0));
moel@359	1088	c.Add(new Ctrl("CPU Fan", 1));
moel@359	1089	c.Add(new Ctrl("Chassis Fan #2", 2));
moel@359	1090	c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359	1091	break;
moel@368	1092	default:
moel@368	1093	v.Add(new Voltage("CPU VCore", 0));
moel@368	1094	v.Add(new Voltage("Voltage #2", 1, true));
moel@368	1095	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@368	1096	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@368	1097	v.Add(new Voltage("Voltage #5", 4, true));
moel@368	1098	v.Add(new Voltage("Voltage #6", 5, true));
moel@368	1099	v.Add(new Voltage("Voltage #7", 6, true));
moel@368	1100	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@368	1101	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@368	1102	v.Add(new Voltage("VTT", 9));
moel@368	1103	v.Add(new Voltage("Voltage #11", 10, true));
moel@368	1104	v.Add(new Voltage("Voltage #12", 11, true));
moel@368	1105	v.Add(new Voltage("Voltage #13", 12, true));
moel@368	1106	v.Add(new Voltage("Voltage #14", 13, true));
moel@368	1107	v.Add(new Voltage("Voltage #15", 14, true));
moel@368	1108	t.Add(new Temperature("CPU Core", 0));
moel@368	1109	t.Add(new Temperature("Temperature #1", 1));
moel@368	1110	t.Add(new Temperature("Temperature #2", 2));
moel@368	1111	t.Add(new Temperature("Temperature #3", 3));
moel@368	1112	t.Add(new Temperature("Temperature #4", 4));
moel@368	1113	t.Add(new Temperature("Temperature #5", 5));
moel@368	1114	t.Add(new Temperature("Temperature #6", 6));
moel@368	1115	for (int i = 0; i < superIO.Fans.Length; i++)
moel@368	1116	f.Add(new Fan("Fan #" + (i + 1), i));
moel@368	1117	for (int i = 0; i < superIO.Controls.Length; i++)
moel@368	1118	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@368	1119	break;
moel@359	1120	}
moel@359	1121	break;
moel@359	1122	default:
moel@359	1123	v.Add(new Voltage("CPU VCore", 0));
moel@359	1124	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1125	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1126	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1127	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1128	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1129	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1130	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1131	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1132	v.Add(new Voltage("VTT", 9));
moel@359	1133	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1134	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1135	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1136	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1137	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1138	t.Add(new Temperature("CPU Core", 0));
moel@359	1139	t.Add(new Temperature("Temperature #1", 1));
moel@359	1140	t.Add(new Temperature("Temperature #2", 2));
moel@359	1141	t.Add(new Temperature("Temperature #3", 3));
moel@359	1142	t.Add(new Temperature("Temperature #4", 4));
moel@359	1143	t.Add(new Temperature("Temperature #5", 5));
moel@359	1144	t.Add(new Temperature("Temperature #6", 6));
moel@359	1145	for (int i = 0; i < superIO.Fans.Length; i++)
moel@359	1146	f.Add(new Fan("Fan #" + (i + 1), i));
moel@359	1147	for (int i = 0; i < superIO.Controls.Length; i++)
moel@359	1148	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359	1149	break;
moel@359	1150	}
moel@356	1151	break;
moel@130	1152	default:
moel@130	1153	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	1154	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	1155	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	1156	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	1157	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	1158	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	1159	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	1160	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	1161	break;
moel@130	1162	}
moel@130	1163
moel@195	1164	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	1165	foreach (Voltage voltage in v)
moel@130	1166	if (voltage.Index < superIO.Voltages.Length) {
moel@130	1167	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	1168	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	1169	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	1170	formula, voltage.Ri),
moel@130	1171	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	1172	formula, voltage.Rf),
moel@130	1173	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	1174	formula, voltage.Vf)
moel@165	1175	}, settings);
moel@130	1176	voltages.Add(sensor);
moel@130	1177	}
moel@130	1178
moel@130	1179	foreach (Temperature temperature in t)
moel@130	1180	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	1181	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	1182	SensorType.Temperature, this, new [] {
moel@130	1183	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	1184	}, settings);
moel@130	1185	temperatures.Add(sensor);
moel@130	1186	}
moel@130	1187
moel@130	1188	foreach (Fan fan in f)
moel@130	1189	if (fan.Index < superIO.Fans.Length) {
moel@134	1190	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	1191	this, settings);
moel@130	1192	fans.Add(sensor);
moel@130	1193	}
moel@323	1194
moel@323	1195	foreach (Ctrl ctrl in c) {
moel@323	1196	int index = ctrl.Index;
moel@323	1197	if (index < superIO.Controls.Length) {
moel@323	1198	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323	1199	this, settings);
moel@323	1200	Control control = new Control(sensor, settings, 0, 100);
moel@323	1201	control.ControlModeChanged += (cc) => {
moel@323	1202	if (cc.ControlMode == ControlMode.Default) {
moel@323	1203	superIO.SetControl(index, null);
moel@323	1204	} else {
moel@323	1205	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1206	}
moel@323	1207	};
moel@323	1208	control.SoftwareControlValueChanged += (cc) => {
moel@323	1209	if (cc.ControlMode == ControlMode.Software)
moel@323	1210	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1211	};
moel@323	1212	if (control.ControlMode == ControlMode.Software)
moel@323	1213	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323	1214	sensor.Control = control;
moel@323	1215	controls.Add(sensor);
moel@389	1216	ActivateSensor(sensor);
moel@323	1217	}
moel@323	1218	}
moel@130	1219	}
moel@130	1220
moel@165	1221	public override HardwareType HardwareType {
moel@165	1222	get { return HardwareType.SuperIO; }
moel@130	1223	}
moel@130	1224
moel@176	1225	public override IHardware Parent {
moel@176	1226	get { return mainboard; }
moel@176	1227	}
moel@176	1228
moel@130	1229
moel@130	1230	public override string GetReport() {
moel@130	1231	return superIO.GetReport();
moel@130	1232	}
moel@130	1233
moel@130	1234	public override void Update() {
moel@130	1235	superIO.Update();
moel@130	1236
moel@130	1237	foreach (Sensor sensor in voltages) {
moel@228	1238	float? value = readVoltage(sensor.Index);
moel@130	1239	if (value.HasValue) {
moel@130	1240	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1241	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1242	ActivateSensor(sensor);
moel@130	1243	}
moel@130	1244	}
moel@130	1245
moel@130	1246	foreach (Sensor sensor in temperatures) {
moel@228	1247	float? value = readTemperature(sensor.Index);
moel@130	1248	if (value.HasValue) {
moel@130	1249	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1250	ActivateSensor(sensor);
moel@130	1251	}
moel@130	1252	}
moel@130	1253
moel@130	1254	foreach (Sensor sensor in fans) {
moel@228	1255	float? value = readFan(sensor.Index);
moel@130	1256	if (value.HasValue) {
moel@130	1257	sensor.Value = value;
moel@130	1258	if (value.Value > 0)
moel@130	1259	ActivateSensor(sensor);
moel@130	1260	}
moel@130	1261	}
moel@228	1262
moel@323	1263	foreach (Sensor sensor in controls) {
moel@323	1264	float? value = readControl(sensor.Index);
moel@389	1265	sensor.Value = value;
moel@323	1266	}
moel@323	1267
moel@228	1268	postUpdate();
moel@130	1269	}
moel@130	1270
moel@323	1271	public override void Close() {
moel@323	1272	foreach (Sensor sensor in controls) {
moel@323	1273	// restore all controls back to default
moel@323	1274	superIO.SetControl(sensor.Index, null);
moel@323	1275	}
moel@323	1276	base.Close();
moel@323	1277	}
moel@323	1278
moel@130	1279	private class Voltage {
moel@130	1280	public readonly string Name;
moel@130	1281	public readonly int Index;
moel@130	1282	public readonly float Ri;
moel@130	1283	public readonly float Rf;
moel@130	1284	public readonly float Vf;
moel@130	1285	public readonly bool Hidden;
moel@130	1286
moel@202	1287	public Voltage(string name, int index) :
moel@202	1288	this(name, index, false) { }
moel@202	1289
moel@130	1290	public Voltage(string name, int index, bool hidden) :
moel@130	1291	this(name, index, 0, 1, 0, hidden) { }
moel@202	1292
moel@202	1293	public Voltage(string name, int index, float ri, float rf) :
moel@202	1294	this(name, index, ri, rf, 0, false) { }
moel@202	1295
moel@202	1296	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1297
moel@195	1298	public Voltage(string name, int index,
moel@202	1299	float ri, float rf, float vf, bool hidden)
moel@195	1300	{
moel@130	1301	this.Name = name;
moel@130	1302	this.Index = index;
moel@130	1303	this.Ri = ri;
moel@130	1304	this.Rf = rf;
moel@130	1305	this.Vf = vf;
moel@130	1306	this.Hidden = hidden;
moel@130	1307	}
moel@130	1308	}
moel@130	1309
moel@130	1310	private class Temperature {
moel@130	1311	public readonly string Name;
moel@130	1312	public readonly int Index;
moel@130	1313
moel@167	1314	public Temperature(string name, int index) {
moel@130	1315	this.Name = name;
moel@130	1316	this.Index = index;
moel@130	1317	}
moel@130	1318	}
moel@130	1319
moel@130	1320	private class Fan {
moel@130	1321	public readonly string Name;
moel@130	1322	public readonly int Index;
moel@130	1323
moel@130	1324	public Fan(string name, int index) {
moel@130	1325	this.Name = name;
moel@130	1326	this.Index = index;
moel@130	1327	}
moel@130	1328	}
moel@323	1329
moel@323	1330	private class Ctrl {
moel@323	1331	public readonly string Name;
moel@323	1332	public readonly int Index;
moel@323	1333
moel@323	1334	public Ctrl(string name, int index) {
moel@323	1335	this.Name = name;
moel@323	1336	this.Index = index;
moel@323	1337	}
moel@323	1338	}
moel@130	1339	}
moel@130	1340	}

author	moel.mich
	Sun, 04 Nov 2012 13:10:53 +0000
changeset 389	93cee0b9f619
parent 383	ace2c5fc4b7f
child 408	bbeb9004c491
permissions	-rw-r--r--