OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@961c07a3bd78 (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@265	19	Portions created by the Initial Developer are Copyright (C) 2009-2011
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@228	38	using System;
moel@130	39	using System.Collections.Generic;
moel@166	40	using System.Globalization;
moel@228	41	using System.Threading;
moel@130	42	using OpenHardwareMonitor.Hardware.LPC;
moel@130	43
moel@130	44	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	45	internal class SuperIOHardware : Hardware {
moel@130	46
moel@195	47	private readonly Mainboard mainboard;
moel@195	48	private readonly ISuperIO superIO;
moel@195	49	private readonly string name;
moel@130	50
moel@195	51	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	52	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	53	private readonly List<Sensor> fans = new List<Sensor>();
moel@167	54
moel@228	55	private delegate float? ReadValueDelegate(int index);
moel@228	56	private delegate void UpdateDelegate();
moel@228	57
moel@228	58	// delegates for mainboard specific sensor reading code
moel@228	59	private readonly ReadValueDelegate readVoltage;
moel@228	60	private readonly ReadValueDelegate readTemperature;
moel@228	61	private readonly ReadValueDelegate readFan;
moel@228	62
moel@228	63	// delegate for post update mainboard specific code
moel@228	64	private readonly UpdateDelegate postUpdate;
moel@228	65
moel@228	66	// mainboard specific mutex
moel@228	67	private readonly Mutex mutex;
moel@228	68
moel@176	69	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	70	Manufacturer manufacturer, Model model, ISettings settings)
moel@130	71	{
moel@176	72	this.mainboard = mainboard;
moel@130	73	this.superIO = superIO;
moel@167	74	this.name = ChipName.GetName(superIO.Chip);
moel@130	75
moel@228	76	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	77	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	78	this.readFan = (index) => superIO.Fans[index];
moel@228	79
moel@228	80	this.postUpdate = () => { };
moel@228	81
moel@130	82	List<Voltage> v = new List<Voltage>();
moel@130	83	List<Temperature> t = new List<Temperature>();
moel@130	84	List<Fan> f = new List<Fan>();
moel@130	85
moel@130	86	switch (superIO.Chip) {
moel@130	87	case Chip.IT8712F:
moel@130	88	case Chip.IT8716F:
moel@130	89	case Chip.IT8718F:
moel@177	90	case Chip.IT8720F:
moel@130	91	case Chip.IT8726F:
moel@130	92	switch (manufacturer) {
moel@133	93	case Manufacturer.ASUS:
moel@133	94	switch (model) {
moel@168	95	case Model.Crosshair_III_Formula: // IT8720F
moel@133	96	v.Add(new Voltage("VBat", 8));
moel@133	97	t.Add(new Temperature("CPU", 0));
moel@133	98	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	99	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	100	break;
moel@144	101	case Model.M2N_SLI_DELUXE:
moel@133	102	v.Add(new Voltage("CPU VCore", 0));
moel@133	103	v.Add(new Voltage("+3.3V", 1));
moel@195	104	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	105	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	106	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	107	v.Add(new Voltage("VBat", 8));
moel@133	108	t.Add(new Temperature("CPU", 0));
moel@133	109	t.Add(new Temperature("Motherboard", 1));
moel@133	110	f.Add(new Fan("CPU Fan", 0));
moel@133	111	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	112	f.Add(new Fan("Power Fan", 2));
moel@133	113	break;
moel@168	114	case Model.M4A79XTD_EVO: // IT8720F
moel@195	115	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	116	v.Add(new Voltage("VBat", 8));
moel@144	117	t.Add(new Temperature("CPU", 0));
moel@144	118	t.Add(new Temperature("Motherboard", 1));
moel@144	119	f.Add(new Fan("CPU Fan", 0));
moel@144	120	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	121	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	122	break;
moel@133	123	default:
moel@133	124	v.Add(new Voltage("CPU VCore", 0));
moel@133	125	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	126	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	127	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	128	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	129	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	130	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	131	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	132	v.Add(new Voltage("VBat", 8));
moel@133	133	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	134	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	135	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	136	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	137	break;
moel@133	138	}
moel@133	139	break;
moel@221	140
moel@221	141	case Manufacturer.ASRock:
moel@221	142	switch (model) {
moel@221	143	case Model.P55_Deluxe: // IT8720F
moel@228	144
moel@221	145	v.Add(new Voltage("CPU VCore", 0));
moel@221	146	v.Add(new Voltage("+3.3V", 2));
moel@221	147	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	148	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	149	v.Add(new Voltage("VBat", 8));
moel@221	150	t.Add(new Temperature("CPU", 0));
moel@221	151	t.Add(new Temperature("Motherboard", 1));
moel@221	152	f.Add(new Fan("CPU Fan", 0));
moel@221	153	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	154
moel@228	155	// this mutex is also used by the official ASRock tool
moel@228	156	mutex = new Mutex(false, "ASRockOCMark");
moel@228	157
moel@228	158	bool exclusiveAccess = false;
moel@228	159	try {
moel@228	160	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	161	} catch (AbandonedMutexException) { }
moel@228	162	catch (InvalidOperationException) { }
moel@228	163
moel@228	164	// only read additional fans if we get exclusive access
moel@228	165	if (exclusiveAccess) {
moel@228	166
moel@228	167	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	168	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	169	f.Add(new Fan("Power Fan", 4));
moel@228	170
moel@228	171	readFan = (index) => {
moel@228	172	if (index < 2) {
moel@228	173	return superIO.Fans[index];
moel@228	174	} else {
moel@228	175	// get GPIO 80-87
moel@228	176	byte? gpio = superIO.ReadGPIO(7);
moel@228	177	if (!gpio.HasValue)
moel@228	178	return null;
moel@228	179
moel@228	180	// read the last 3 fans based on GPIO 83-85
moel@228	181	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	182	return (((gpio.Value >> 3) & 0x07) ==
moel@228	183	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	184	}
moel@228	185	};
moel@228	186
moel@228	187	int fanIndex = 0;
moel@228	188	postUpdate = () => {
moel@228	189	// get GPIO 80-87
moel@228	190	byte? gpio = superIO.ReadGPIO(7);
moel@228	191	if (!gpio.HasValue)
moel@228	192	return;
moel@228	193
moel@228	194	// prepare the GPIO 83-85 for the next update
moel@228	195	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	196	superIO.WriteGPIO(7,
moel@228	197	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	198	fanIndex = (fanIndex + 1) % 3;
moel@228	199	};
moel@228	200	}
moel@228	201
moel@221	202	break;
moel@221	203	default:
moel@221	204	v.Add(new Voltage("CPU VCore", 0));
moel@221	205	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	206	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	207	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	208	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	209	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	210	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	211	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	212	v.Add(new Voltage("VBat", 8));
moel@221	213	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	214	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	215	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	216	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	217	break;
moel@221	218	};
moel@221	219	break;
moel@221	220
moel@130	221	case Manufacturer.DFI:
moel@130	222	switch (model) {
moel@168	223	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	224	v.Add(new Voltage("CPU VCore", 0));
moel@130	225	v.Add(new Voltage("FSB VTT", 1));
moel@130	226	v.Add(new Voltage("+3.3V", 2));
moel@195	227	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	228	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	229	v.Add(new Voltage("NB Core", 5));
moel@130	230	v.Add(new Voltage("VDIMM", 6));
moel@195	231	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	232	v.Add(new Voltage("VBat", 8));
moel@130	233	t.Add(new Temperature("CPU", 0));
moel@130	234	t.Add(new Temperature("System", 1));
moel@130	235	t.Add(new Temperature("Chipset", 2));
moel@130	236	f.Add(new Fan("Fan #1", 0));
moel@130	237	f.Add(new Fan("Fan #2", 1));
moel@130	238	f.Add(new Fan("Fan #3", 2));
moel@130	239	break;
moel@168	240	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	241	v.Add(new Voltage("CPU VCore", 0));
moel@130	242	v.Add(new Voltage("VTT", 1));
moel@130	243	v.Add(new Voltage("+3.3V", 2));
moel@195	244	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	245	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	246	v.Add(new Voltage("CPU PLL", 5));
moel@130	247	v.Add(new Voltage("DRAM", 6));
moel@195	248	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	249	v.Add(new Voltage("VBat", 8));
moel@130	250	t.Add(new Temperature("Chipset", 0));
moel@130	251	t.Add(new Temperature("CPU PWM", 1));
moel@130	252	t.Add(new Temperature("CPU", 2));
moel@130	253	f.Add(new Fan("Fan #1", 0));
moel@130	254	f.Add(new Fan("Fan #2", 1));
moel@130	255	f.Add(new Fan("Fan #3", 2));
moel@130	256	break;
moel@130	257	default:
moel@130	258	v.Add(new Voltage("CPU VCore", 0));
moel@130	259	v.Add(new Voltage("VTT", 1, true));
moel@130	260	v.Add(new Voltage("+3.3V", 2, true));
moel@130	261	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	262	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	263	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	264	v.Add(new Voltage("DRAM", 6, true));
moel@130	265	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	266	v.Add(new Voltage("VBat", 8));
moel@130	267	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	268	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	269	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	270	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	271	break;
moel@130	272	}
moel@130	273	break;
moel@130	274
moel@130	275	case Manufacturer.Gigabyte:
moel@130	276	switch (model) {
moel@168	277	case Model._965P_S3: // IT8718F
moel@130	278	v.Add(new Voltage("CPU VCore", 0));
moel@130	279	v.Add(new Voltage("DRAM", 1));
moel@130	280	v.Add(new Voltage("+3.3V", 2));
moel@195	281	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	282	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	283	v.Add(new Voltage("VBat", 8));
moel@130	284	t.Add(new Temperature("System", 0));
moel@130	285	t.Add(new Temperature("CPU", 1));
moel@130	286	f.Add(new Fan("CPU Fan", 0));
moel@130	287	f.Add(new Fan("System Fan", 1));
moel@130	288	break;
moel@168	289	case Model.EP45_DS3R: // IT8718F
moel@130	290	case Model.EP45_UD3R:
moel@138	291	case Model.X38_DS5:
moel@130	292	v.Add(new Voltage("CPU VCore", 0));
moel@130	293	v.Add(new Voltage("DRAM", 1));
moel@130	294	v.Add(new Voltage("+3.3V", 2));
moel@195	295	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	296	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	297	v.Add(new Voltage("VBat", 8));
moel@130	298	t.Add(new Temperature("System", 0));
moel@130	299	t.Add(new Temperature("CPU", 1));
moel@130	300	f.Add(new Fan("CPU Fan", 0));
moel@130	301	f.Add(new Fan("System Fan #2", 1));
moel@130	302	f.Add(new Fan("Power Fan", 2));
moel@130	303	f.Add(new Fan("System Fan #1", 3));
moel@130	304	break;
moel@168	305	case Model.EX58_EXTREME: // IT8720F
moel@133	306	v.Add(new Voltage("CPU VCore", 0));
moel@133	307	v.Add(new Voltage("DRAM", 1));
moel@195	308	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	309	v.Add(new Voltage("VBat", 8));
moel@133	310	t.Add(new Temperature("System", 0));
moel@133	311	t.Add(new Temperature("CPU", 1));
moel@138	312	t.Add(new Temperature("Northbridge", 2));
moel@133	313	f.Add(new Fan("CPU Fan", 0));
moel@133	314	f.Add(new Fan("System Fan #2", 1));
moel@133	315	f.Add(new Fan("Power Fan", 2));
moel@133	316	f.Add(new Fan("System Fan #1", 3));
moel@133	317	break;
moel@168	318	case Model.P35_DS3: // IT8718F
moel@168	319	case Model.P35_DS3L: // IT8718F
moel@130	320	v.Add(new Voltage("CPU VCore", 0));
moel@130	321	v.Add(new Voltage("DRAM", 1));
moel@130	322	v.Add(new Voltage("+3.3V", 2));
moel@195	323	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	324	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	325	v.Add(new Voltage("VBat", 8));
moel@130	326	t.Add(new Temperature("System", 0));
moel@130	327	t.Add(new Temperature("CPU", 1));
moel@130	328	f.Add(new Fan("CPU Fan", 0));
moel@130	329	f.Add(new Fan("System Fan #1", 1));
moel@130	330	f.Add(new Fan("System Fan #2", 2));
moel@130	331	f.Add(new Fan("Power Fan", 3));
moel@130	332	break;
moel@168	333	case Model.P55_UD4: // IT8720F
moel@168	334	case Model.P55M_UD4: // IT8720F
moel@148	335	v.Add(new Voltage("CPU VCore", 0));
moel@148	336	v.Add(new Voltage("DRAM", 1));
moel@148	337	v.Add(new Voltage("+3.3V", 2));
moel@195	338	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	339	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	340	v.Add(new Voltage("VBat", 8));
moel@148	341	t.Add(new Temperature("System", 0));
moel@148	342	t.Add(new Temperature("CPU", 2));
moel@148	343	f.Add(new Fan("CPU Fan", 0));
moel@148	344	f.Add(new Fan("System Fan #2", 1));
moel@148	345	f.Add(new Fan("Power Fan", 2));
moel@148	346	f.Add(new Fan("System Fan #1", 3));
moel@148	347	break;
moel@168	348	case Model.GA_MA770T_UD3: // IT8720F
moel@154	349	v.Add(new Voltage("CPU VCore", 0));
moel@154	350	v.Add(new Voltage("DRAM", 1));
moel@154	351	v.Add(new Voltage("+3.3V", 2));
moel@195	352	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	353	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	354	v.Add(new Voltage("VBat", 8));
moel@154	355	t.Add(new Temperature("System", 0));
moel@154	356	t.Add(new Temperature("CPU", 1));
moel@154	357	f.Add(new Fan("CPU Fan", 0));
moel@154	358	f.Add(new Fan("System Fan #1", 1));
moel@154	359	f.Add(new Fan("System Fan #2", 2));
moel@154	360	f.Add(new Fan("Power Fan", 3));
moel@154	361	break;
moel@168	362	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	363	v.Add(new Voltage("CPU VCore", 0));
moel@130	364	v.Add(new Voltage("DRAM", 1));
moel@130	365	v.Add(new Voltage("+3.3V", 2));
moel@195	366	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	367	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	368	v.Add(new Voltage("VBat", 8));
moel@130	369	t.Add(new Temperature("System", 0));
moel@130	370	t.Add(new Temperature("CPU", 1));
moel@130	371	f.Add(new Fan("CPU Fan", 0));
moel@130	372	f.Add(new Fan("System Fan", 1));
moel@130	373	f.Add(new Fan("NB Fan", 2));
moel@130	374	break;
moel@168	375	case Model.X58A_UD3R: // IT8720F
moel@138	376	v.Add(new Voltage("CPU VCore", 0));
moel@138	377	v.Add(new Voltage("DRAM", 1));
moel@138	378	v.Add(new Voltage("+3.3V", 2));
moel@195	379	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	380	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	381	v.Add(new Voltage("VBat", 8));
moel@138	382	t.Add(new Temperature("System", 0));
moel@138	383	t.Add(new Temperature("CPU", 1));
moel@138	384	t.Add(new Temperature("Northbridge", 2));
moel@138	385	f.Add(new Fan("CPU Fan", 0));
moel@138	386	f.Add(new Fan("System Fan #2", 1));
moel@138	387	f.Add(new Fan("Power Fan", 2));
moel@138	388	f.Add(new Fan("System Fan #1", 3));
moel@138	389	break;
moel@130	390	default:
moel@130	391	v.Add(new Voltage("CPU VCore", 0));
moel@130	392	v.Add(new Voltage("DRAM", 1, true));
moel@130	393	v.Add(new Voltage("+3.3V", 2, true));
moel@130	394	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	395	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	396	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	397	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	398	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	399	v.Add(new Voltage("VBat", 8));
moel@130	400	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	401	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	402	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	403	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	404	break;
moel@130	405	}
moel@130	406	break;
moel@130	407
moel@130	408	default:
moel@130	409	v.Add(new Voltage("CPU VCore", 0));
moel@130	410	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	411	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	412	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	413	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	414	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	415	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	416	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	417	v.Add(new Voltage("VBat", 8));
moel@130	418	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	419	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	420	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	421	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	422	break;
moel@130	423	}
moel@130	424	break;
moel@170	425
moel@170	426	case Chip.IT8721F:
moel@177	427	switch (manufacturer) {
moel@177	428	case Manufacturer.ECS:
moel@177	429	switch (model) {
moel@177	430	case Model.A890GXM_A: // IT8721F
moel@177	431	v.Add(new Voltage("CPU VCore", 0));
moel@177	432	v.Add(new Voltage("VDIMM", 1));
moel@177	433	v.Add(new Voltage("NB Voltage", 2));
moel@195	434	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	435	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	436	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	437	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	438	t.Add(new Temperature("CPU", 0));
moel@177	439	t.Add(new Temperature("System", 1));
moel@177	440	t.Add(new Temperature("Northbridge", 2));
moel@177	441	f.Add(new Fan("CPU Fan", 0));
moel@177	442	f.Add(new Fan("System Fan", 1));
moel@177	443	f.Add(new Fan("Power Fan", 2));
moel@177	444	break;
moel@177	445	default:
moel@177	446	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	447	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	448	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	449	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	450	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	451	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	452	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	453	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	454	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	455	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	456	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	457	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	458	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	459	break;
moel@177	460	}
moel@177	461	break;
moel@177	462	default:
moel@177	463	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	464	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	465	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	466	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	467	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	468	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	469	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	470	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	471	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	472	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	473	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	474	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	475	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	476	break;
moel@177	477	}
moel@170	478	break;
moel@130	479
moel@130	480	case Chip.F71858:
moel@195	481	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	482	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	483	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	484	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	485	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	486	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	487	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	488	break;
moel@130	489	case Chip.F71862:
moel@130	490	case Chip.F71869:
moel@130	491	case Chip.F71882:
moel@130	492	case Chip.F71889ED:
moel@130	493	case Chip.F71889F:
moel@132	494	switch (manufacturer) {
moel@132	495	case Manufacturer.EVGA:
moel@132	496	switch (model) {
moel@168	497	case Model.X58_SLI_Classified: // F71882
moel@195	498	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	499	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	500	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	501	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	502	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	503	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	504	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	505	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	506	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	507	t.Add(new Temperature("CPU", 0));
moel@132	508	t.Add(new Temperature("VREG", 1));
moel@132	509	t.Add(new Temperature("System", 2));
moel@132	510	f.Add(new Fan("CPU Fan", 0));
moel@132	511	f.Add(new Fan("Power Fan", 1));
moel@132	512	f.Add(new Fan("Chassis Fan", 2));
moel@132	513	break;
moel@132	514	default:
moel@195	515	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	516	v.Add(new Voltage("CPU VCore", 1));
moel@132	517	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	518	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	519	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	520	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	521	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	522	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	523	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	524	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	525	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	526	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	527	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	528	break;
moel@132	529	}
moel@132	530	break;
moel@132	531	default:
moel@195	532	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	533	v.Add(new Voltage("CPU VCore", 1));
moel@132	534	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	535	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	536	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	537	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	538	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	539	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	540	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	541	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	542	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	543	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	544	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	545	break;
moel@132	546	}
moel@130	547	break;
moel@130	548
moel@220	549	case Chip.W83627EHF:
moel@220	550	switch (manufacturer) {
moel@220	551	case Manufacturer.ASRock:
moel@220	552	switch (model) {
moel@220	553	case Model.AOD790GX_128M: // W83627EHF
moel@220	554	v.Add(new Voltage("CPU VCore", 0));
moel@220	555	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	556	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	557	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	558	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	559	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	560	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	561	t.Add(new Temperature("CPU", 0));
moel@220	562	t.Add(new Temperature("Motherboard", 2));
moel@221	563	f.Add(new Fan("CPU Fan", 0));
moel@221	564	f.Add(new Fan("Chassis Fan", 1));
moel@220	565	break;
moel@220	566	default:
moel@220	567	v.Add(new Voltage("CPU VCore", 0));
moel@220	568	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	569	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	570	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	571	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	572	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	573	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	574	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	575	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	576	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	577	t.Add(new Temperature("CPU", 0));
moel@220	578	t.Add(new Temperature("Auxiliary", 1));
moel@220	579	t.Add(new Temperature("System", 2));
moel@220	580	f.Add(new Fan("System Fan", 0));
moel@220	581	f.Add(new Fan("CPU Fan", 1));
moel@220	582	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	583	f.Add(new Fan("CPU Fan #2", 3));
moel@220	584	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	585	break;
moel@220	586	} break;
moel@220	587	default:
moel@220	588	v.Add(new Voltage("CPU VCore", 0));
moel@220	589	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	590	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	591	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	592	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	593	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	594	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	595	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	596	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	597	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	598	t.Add(new Temperature("CPU", 0));
moel@220	599	t.Add(new Temperature("Auxiliary", 1));
moel@220	600	t.Add(new Temperature("System", 2));
moel@220	601	f.Add(new Fan("System Fan", 0));
moel@220	602	f.Add(new Fan("CPU Fan", 1));
moel@220	603	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	604	f.Add(new Fan("CPU Fan #2", 3));
moel@220	605	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	606	break;
moel@220	607	}
moel@130	608	break;
moel@130	609	case Chip.W83627DHG:
moel@130	610	case Chip.W83627DHGP:
moel@130	611	case Chip.W83667HG:
moel@130	612	case Chip.W83667HGB:
moel@152	613	switch (manufacturer) {
moel@153	614	case Manufacturer.ASRock:
moel@153	615	switch (model) {
moel@168	616	case Model._880GMH_USB3: // W83627DHG-P
moel@153	617	v.Add(new Voltage("CPU VCore", 0));
moel@195	618	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	619	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	620	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	621	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	622	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	623	t.Add(new Temperature("CPU", 0));
moel@153	624	t.Add(new Temperature("Motherboard", 2));
moel@153	625	f.Add(new Fan("Chassis Fan", 0));
moel@153	626	f.Add(new Fan("CPU Fan", 1));
moel@153	627	f.Add(new Fan("Power Fan", 2));
moel@153	628	break;
moel@153	629	default:
moel@153	630	v.Add(new Voltage("CPU VCore", 0));
moel@153	631	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	632	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	633	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	634	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	635	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	636	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	637	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	638	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	639	t.Add(new Temperature("CPU", 0));
moel@153	640	t.Add(new Temperature("Auxiliary", 1));
moel@153	641	t.Add(new Temperature("System", 2));
moel@153	642	f.Add(new Fan("System Fan", 0));
moel@153	643	f.Add(new Fan("CPU Fan", 1));
moel@153	644	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	645	f.Add(new Fan("CPU Fan #2", 3));
moel@153	646	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	647	break;
moel@153	648	}
moel@153	649	break;
moel@152	650	case Manufacturer.ASUS:
moel@152	651	switch (model) {
moel@174	652	case Model.P6X58D_E: // W83667HG
moel@174	653	case Model.Rampage_II_GENE: // W83667HG
moel@152	654	v.Add(new Voltage("CPU VCore", 0));
moel@195	655	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	656	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	657	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	658	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	659	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	660	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	661	t.Add(new Temperature("CPU", 0));
moel@174	662	t.Add(new Temperature("Motherboard", 2));
moel@174	663	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	664	f.Add(new Fan("CPU Fan", 1));
moel@174	665	f.Add(new Fan("Power Fan", 2));
moel@174	666	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	667	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	668	break;
moel@174	669	case Model.Rampage_Extreme: // W83667HG
moel@174	670	v.Add(new Voltage("CPU VCore", 0));
moel@195	671	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	672	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	673	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	674	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	675	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	676	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	677	t.Add(new Temperature("CPU", 0));
moel@152	678	t.Add(new Temperature("Motherboard", 2));
moel@152	679	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	680	f.Add(new Fan("CPU Fan", 1));
moel@153	681	f.Add(new Fan("Power Fan", 2));
moel@152	682	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	683	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	684	break;
moel@152	685	default:
moel@152	686	v.Add(new Voltage("CPU VCore", 0));
moel@152	687	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	688	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	689	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	690	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	691	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	692	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	693	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	694	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	695	t.Add(new Temperature("CPU", 0));
moel@152	696	t.Add(new Temperature("Auxiliary", 1));
moel@152	697	t.Add(new Temperature("System", 2));
moel@153	698	f.Add(new Fan("System Fan", 0));
moel@153	699	f.Add(new Fan("CPU Fan", 1));
moel@153	700	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	701	f.Add(new Fan("CPU Fan #2", 3));
moel@153	702	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	703	break;
moel@152	704	}
moel@152	705	break;
moel@152	706	default:
moel@152	707	v.Add(new Voltage("CPU VCore", 0));
moel@152	708	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	709	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	710	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	711	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	712	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	713	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	714	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	715	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	716	t.Add(new Temperature("CPU", 0));
moel@152	717	t.Add(new Temperature("Auxiliary", 1));
moel@152	718	t.Add(new Temperature("System", 2));
moel@153	719	f.Add(new Fan("System Fan", 0));
moel@153	720	f.Add(new Fan("CPU Fan", 1));
moel@153	721	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	722	f.Add(new Fan("CPU Fan #2", 3));
moel@153	723	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	724	break;
moel@152	725	}
moel@130	726	break;
moel@130	727	case Chip.W83627HF:
moel@130	728	case Chip.W83627THF:
moel@130	729	case Chip.W83687THF:
moel@130	730	v.Add(new Voltage("CPU VCore", 0));
moel@130	731	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	732	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	733	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	734	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	735	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	736	v.Add(new Voltage("VBAT", 6));
moel@130	737	t.Add(new Temperature("CPU", 0));
moel@130	738	t.Add(new Temperature("Auxiliary", 1));
moel@130	739	t.Add(new Temperature("System", 2));
moel@153	740	f.Add(new Fan("System Fan", 0));
moel@153	741	f.Add(new Fan("CPU Fan", 1));
moel@153	742	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	743	break;
moel@245	744	case Chip.NCT6771F:
moel@265	745	case Chip.NCT6776F:
moel@265	746	switch (manufacturer) {
moel@265	747	case Manufacturer.ASUS:
moel@265	748	switch (model) {
moel@265	749	case Model.P8P67_PRO: // NCT6776F
moel@265	750	v.Add(new Voltage("CPU VCore", 0));
moel@265	751	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	752	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	753	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	754	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	755	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	756	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	757	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	758	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	759	t.Add(new Temperature("CPU", 0));
moel@265	760	t.Add(new Temperature("Auxiliary", 1));
moel@265	761	t.Add(new Temperature("System", 2));
moel@265	762	f.Add(new Fan("System Fan", 0));
moel@265	763	f.Add(new Fan("CPU Fan", 1));
moel@265	764	f.Add(new Fan("Auxiliary Fan", 2));
moel@265	765	f.Add(new Fan("Auxiliary Fan #2", 3));
moel@265	766	f.Add(new Fan("Auxiliary Fan #3", 4));
moel@265	767	break;
moel@265	768	default:
moel@265	769	v.Add(new Voltage("CPU VCore", 0));
moel@265	770	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	771	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	772	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	773	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	774	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	775	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	776	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	777	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	778	t.Add(new Temperature("CPU", 0));
moel@265	779	t.Add(new Temperature("Auxiliary", 1));
moel@265	780	t.Add(new Temperature("System", 2));
moel@265	781	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	782	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	783	break;
moel@265	784	}
moel@265	785	break;
moel@265	786	default:
moel@265	787	v.Add(new Voltage("CPU VCore", 0));
moel@265	788	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	789	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	790	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	791	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	792	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	793	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	794	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	795	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	796	t.Add(new Temperature("CPU", 0));
moel@265	797	t.Add(new Temperature("Auxiliary", 1));
moel@265	798	t.Add(new Temperature("System", 2));
moel@265	799	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	800	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	801	break;
moel@265	802	}
moel@245	803	break;
moel@130	804	default:
moel@130	805	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	806	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	807	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	808	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	809	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	810	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	811	break;
moel@130	812	}
moel@130	813
moel@195	814	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	815	foreach (Voltage voltage in v)
moel@130	816	if (voltage.Index < superIO.Voltages.Length) {
moel@130	817	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	818	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	819	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	820	formula, voltage.Ri),
moel@130	821	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	822	formula, voltage.Rf),
moel@130	823	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	824	formula, voltage.Vf)
moel@165	825	}, settings);
moel@130	826	voltages.Add(sensor);
moel@130	827	}
moel@130	828
moel@130	829	foreach (Temperature temperature in t)
moel@130	830	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	831	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	832	SensorType.Temperature, this, new [] {
moel@130	833	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	834	}, settings);
moel@130	835	temperatures.Add(sensor);
moel@130	836	}
moel@130	837
moel@130	838	foreach (Fan fan in f)
moel@130	839	if (fan.Index < superIO.Fans.Length) {
moel@134	840	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	841	this, settings);
moel@130	842	fans.Add(sensor);
moel@130	843	}
moel@130	844	}
moel@130	845
moel@130	846	public override Identifier Identifier {
moel@166	847	get {
moel@166	848	return new Identifier("lpc",
moel@166	849	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));
moel@166	850	}
moel@130	851	}
moel@130	852
moel@165	853	public override HardwareType HardwareType {
moel@165	854	get { return HardwareType.SuperIO; }
moel@130	855	}
moel@130	856
moel@176	857	public override IHardware Parent {
moel@176	858	get { return mainboard; }
moel@176	859	}
moel@176	860
moel@130	861	public override string Name {
moel@130	862	get { return name; }
moel@130	863	}
moel@130	864
moel@130	865	public override string GetReport() {
moel@130	866	return superIO.GetReport();
moel@130	867	}
moel@130	868
moel@130	869	public override void Update() {
moel@130	870	superIO.Update();
moel@130	871
moel@130	872	foreach (Sensor sensor in voltages) {
moel@228	873	float? value = readVoltage(sensor.Index);
moel@130	874	if (value.HasValue) {
moel@130	875	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	876	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	877	ActivateSensor(sensor);
moel@130	878	}
moel@130	879	}
moel@130	880
moel@130	881	foreach (Sensor sensor in temperatures) {
moel@228	882	float? value = readTemperature(sensor.Index);
moel@130	883	if (value.HasValue) {
moel@130	884	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	885	ActivateSensor(sensor);
moel@130	886	}
moel@130	887	}
moel@130	888
moel@130	889	foreach (Sensor sensor in fans) {
moel@228	890	float? value = readFan(sensor.Index);
moel@130	891	if (value.HasValue) {
moel@130	892	sensor.Value = value;
moel@130	893	if (value.Value > 0)
moel@130	894	ActivateSensor(sensor);
moel@130	895	}
moel@130	896	}
moel@228	897
moel@228	898	postUpdate();
moel@130	899	}
moel@130	900
moel@130	901	private class Voltage {
moel@130	902	public readonly string Name;
moel@130	903	public readonly int Index;
moel@130	904	public readonly float Ri;
moel@130	905	public readonly float Rf;
moel@130	906	public readonly float Vf;
moel@130	907	public readonly bool Hidden;
moel@130	908
moel@202	909	public Voltage(string name, int index) :
moel@202	910	this(name, index, false) { }
moel@202	911
moel@130	912	public Voltage(string name, int index, bool hidden) :
moel@130	913	this(name, index, 0, 1, 0, hidden) { }
moel@202	914
moel@202	915	public Voltage(string name, int index, float ri, float rf) :
moel@202	916	this(name, index, ri, rf, 0, false) { }
moel@202	917
moel@202	918	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	919
moel@195	920	public Voltage(string name, int index,
moel@202	921	float ri, float rf, float vf, bool hidden)
moel@195	922	{
moel@130	923	this.Name = name;
moel@130	924	this.Index = index;
moel@130	925	this.Ri = ri;
moel@130	926	this.Rf = rf;
moel@130	927	this.Vf = vf;
moel@130	928	this.Hidden = hidden;
moel@130	929	}
moel@130	930	}
moel@130	931
moel@130	932	private class Temperature {
moel@130	933	public readonly string Name;
moel@130	934	public readonly int Index;
moel@130	935
moel@167	936	public Temperature(string name, int index) {
moel@130	937	this.Name = name;
moel@130	938	this.Index = index;
moel@130	939	}
moel@130	940	}
moel@130	941
moel@130	942	private class Fan {
moel@130	943	public readonly string Name;
moel@130	944	public readonly int Index;
moel@130	945
moel@130	946	public Fan(string name, int index) {
moel@130	947	this.Name = name;
moel@130	948	this.Index = index;
moel@130	949	}
moel@130	950	}
moel@130	951	}
moel@130	952	}

author	moel.mich
	Sat, 19 Mar 2011 22:55:05 +0000
changeset 265	961c07a3bd78
parent 257	f4bcb097746d
child 275	35788ddd1825
permissions	-rw-r--r--