Hardware/Mainboard/SuperIOHardware.cs
author moel.mich
Sun, 26 Jun 2011 16:00:20 +0000
changeset 305 9652074e6ee5
parent 296 414783d1cda9
child 307 31b2b9b5eae9
permissions -rw-r--r--
Added a mainboard specific configuration for the Gigabyte Z68X-UD7-B3 mainboard.
moel@135
     1
/*
moel@130
     2
  
moel@130
     3
  Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130
     4
moel@130
     5
  The contents of this file are subject to the Mozilla Public License Version
moel@130
     6
  1.1 (the "License"); you may not use this file except in compliance with
moel@130
     7
  the License. You may obtain a copy of the License at
moel@130
     8
 
moel@130
     9
  http://www.mozilla.org/MPL/
moel@130
    10
moel@130
    11
  Software distributed under the License is distributed on an "AS IS" basis,
moel@130
    12
  WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130
    13
  for the specific language governing rights and limitations under the License.
moel@130
    14
moel@130
    15
  The Original Code is the Open Hardware Monitor code.
moel@130
    16
moel@130
    17
  The Initial Developer of the Original Code is 
moel@130
    18
  Michael Möller <m.moeller@gmx.ch>.
moel@265
    19
  Portions created by the Initial Developer are Copyright (C) 2009-2011
moel@130
    20
  the Initial Developer. All Rights Reserved.
moel@130
    21
moel@130
    22
  Contributor(s):
moel@130
    23
moel@130
    24
  Alternatively, the contents of this file may be used under the terms of
moel@130
    25
  either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130
    26
  the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130
    27
  in which case the provisions of the GPL or the LGPL are applicable instead
moel@130
    28
  of those above. If you wish to allow use of your version of this file only
moel@130
    29
  under the terms of either the GPL or the LGPL, and not to allow others to
moel@130
    30
  use your version of this file under the terms of the MPL, indicate your
moel@130
    31
  decision by deleting the provisions above and replace them with the notice
moel@130
    32
  and other provisions required by the GPL or the LGPL. If you do not delete
moel@130
    33
  the provisions above, a recipient may use your version of this file under
moel@130
    34
  the terms of any one of the MPL, the GPL or the LGPL.
moel@130
    35
 
moel@130
    36
*/
moel@130
    37
moel@228
    38
using System;
moel@130
    39
using System.Collections.Generic;
moel@166
    40
using System.Globalization;
moel@228
    41
using System.Threading;
moel@130
    42
using OpenHardwareMonitor.Hardware.LPC;
moel@130
    43
moel@130
    44
namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165
    45
  internal class SuperIOHardware : Hardware {
moel@130
    46
moel@195
    47
    private readonly Mainboard mainboard;
moel@195
    48
    private readonly ISuperIO superIO;
moel@130
    49
moel@195
    50
    private readonly List<Sensor> voltages = new List<Sensor>();
moel@195
    51
    private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195
    52
    private readonly List<Sensor> fans = new List<Sensor>();
moel@167
    53
moel@228
    54
    private delegate float? ReadValueDelegate(int index);
moel@228
    55
    private delegate void UpdateDelegate();
moel@228
    56
moel@228
    57
    // delegates for mainboard specific sensor reading code
moel@228
    58
    private readonly ReadValueDelegate readVoltage;
moel@228
    59
    private readonly ReadValueDelegate readTemperature;
moel@228
    60
    private readonly ReadValueDelegate readFan;
moel@228
    61
moel@228
    62
    // delegate for post update mainboard specific code
moel@228
    63
    private readonly UpdateDelegate postUpdate;
moel@228
    64
moel@228
    65
    // mainboard specific mutex
moel@228
    66
    private readonly Mutex mutex;
moel@228
    67
moel@176
    68
    public SuperIOHardware(Mainboard mainboard, ISuperIO superIO, 
moel@176
    69
      Manufacturer manufacturer, Model model, ISettings settings) 
moel@275
    70
      : base(ChipName.GetName(superIO.Chip), new Identifier("lpc", 
moel@275
    71
        superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)), 
moel@275
    72
        settings)
moel@130
    73
    {
moel@176
    74
      this.mainboard = mainboard;
moel@130
    75
      this.superIO = superIO;
moel@130
    76
moel@228
    77
      this.readVoltage = (index) => superIO.Voltages[index];
moel@228
    78
      this.readTemperature = (index) => superIO.Temperatures[index];
moel@228
    79
      this.readFan = (index) => superIO.Fans[index];
moel@228
    80
moel@228
    81
      this.postUpdate = () => { };
moel@228
    82
moel@130
    83
      List<Voltage> v = new List<Voltage>();
moel@130
    84
      List<Temperature> t = new List<Temperature>();
moel@130
    85
      List<Fan> f = new List<Fan>();
moel@130
    86
moel@130
    87
      switch (superIO.Chip) {
moel@130
    88
        case Chip.IT8712F:
moel@130
    89
        case Chip.IT8716F:
moel@130
    90
        case Chip.IT8718F:
moel@177
    91
        case Chip.IT8720F: 
moel@130
    92
        case Chip.IT8726F:
moel@130
    93
          switch (manufacturer) {
moel@133
    94
            case Manufacturer.ASUS:
moel@133
    95
              switch (model) {
moel@168
    96
                case Model.Crosshair_III_Formula: // IT8720F
moel@133
    97
                  v.Add(new Voltage("VBat", 8));
moel@133
    98
                  t.Add(new Temperature("CPU", 0));
moel@133
    99
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@133
   100
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@133
   101
                  break;
moel@144
   102
                case Model.M2N_SLI_DELUXE:                
moel@133
   103
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   104
                  v.Add(new Voltage("+3.3V", 1));
moel@195
   105
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   106
                  v.Add(new Voltage("+12V", 4, 30, 10));
moel@195
   107
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133
   108
                  v.Add(new Voltage("VBat", 8));
moel@133
   109
                  t.Add(new Temperature("CPU", 0));
moel@133
   110
                  t.Add(new Temperature("Motherboard", 1));
moel@133
   111
                  f.Add(new Fan("CPU Fan", 0));
moel@133
   112
                  f.Add(new Fan("Chassis Fan #1", 1));
moel@133
   113
                  f.Add(new Fan("Power Fan", 2));
moel@133
   114
                  break;
moel@168
   115
                case Model.M4A79XTD_EVO: // IT8720F           
moel@195
   116
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144
   117
                  v.Add(new Voltage("VBat", 8));
moel@144
   118
                  t.Add(new Temperature("CPU", 0));
moel@144
   119
                  t.Add(new Temperature("Motherboard", 1));
moel@144
   120
                  f.Add(new Fan("CPU Fan", 0));
moel@144
   121
                  f.Add(new Fan("Chassis Fan #1", 1));
moel@144
   122
                  f.Add(new Fan("Chassis Fan #2", 2));
moel@144
   123
                  break;
moel@133
   124
                default:
moel@133
   125
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   126
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@133
   127
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@133
   128
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@133
   129
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@133
   130
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@133
   131
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@133
   132
                  v.Add(new Voltage("Voltage #8", 7, true));
moel@133
   133
                  v.Add(new Voltage("VBat", 8));
moel@133
   134
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133
   135
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133
   136
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@133
   137
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@133
   138
                  break;
moel@133
   139
              }
moel@133
   140
              break;
moel@221
   141
moel@221
   142
            case Manufacturer.ASRock:
moel@221
   143
              switch (model) {
moel@221
   144
                case Model.P55_Deluxe: // IT8720F
moel@228
   145
                  
moel@221
   146
                  v.Add(new Voltage("CPU VCore", 0));
moel@221
   147
                  v.Add(new Voltage("+3.3V", 2));
moel@221
   148
                  v.Add(new Voltage("+12V", 4, 30, 10));
moel@221
   149
                  v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221
   150
                  v.Add(new Voltage("VBat", 8));                  
moel@221
   151
                  t.Add(new Temperature("CPU", 0));
moel@221
   152
                  t.Add(new Temperature("Motherboard", 1));
moel@221
   153
                  f.Add(new Fan("CPU Fan", 0));
moel@221
   154
                  f.Add(new Fan("Chassis Fan #1", 1));
moel@228
   155
moel@228
   156
                  // this mutex is also used by the official ASRock tool
moel@228
   157
                  mutex = new Mutex(false, "ASRockOCMark");
moel@228
   158
                  
moel@228
   159
                  bool exclusiveAccess = false;
moel@228
   160
                  try {
moel@228
   161
                    exclusiveAccess = mutex.WaitOne(10, false);
moel@228
   162
                  } catch (AbandonedMutexException) { } 
moel@228
   163
                    catch (InvalidOperationException) { }  
moel@228
   164
moel@228
   165
                  // only read additional fans if we get exclusive access
moel@228
   166
                  if (exclusiveAccess) {
moel@228
   167
moel@228
   168
                    f.Add(new Fan("Chassis Fan #2", 2));
moel@228
   169
                    f.Add(new Fan("Chassis Fan #3", 3));
moel@228
   170
                    f.Add(new Fan("Power Fan", 4));
moel@228
   171
moel@228
   172
                    readFan = (index) => {
moel@228
   173
                      if (index < 2) {
moel@228
   174
                        return superIO.Fans[index];
moel@228
   175
                      } else {
moel@228
   176
                        // get GPIO 80-87
moel@228
   177
                        byte? gpio = superIO.ReadGPIO(7);
moel@228
   178
                        if (!gpio.HasValue)
moel@228
   179
                          return null;
moel@228
   180
moel@228
   181
                        // read the last 3 fans based on GPIO 83-85
moel@228
   182
                        int[] masks = { 0x05, 0x03, 0x06 };
moel@228
   183
                        return (((gpio.Value >> 3) & 0x07) ==
moel@228
   184
                          masks[index - 2]) ? superIO.Fans[2] : null;
moel@228
   185
                      }
moel@228
   186
                    };
moel@228
   187
moel@228
   188
                    int fanIndex = 0;
moel@228
   189
                    postUpdate = () => {
moel@228
   190
                      // get GPIO 80-87
moel@228
   191
                      byte? gpio = superIO.ReadGPIO(7);
moel@228
   192
                      if (!gpio.HasValue)
moel@228
   193
                        return;
moel@228
   194
moel@228
   195
                      // prepare the GPIO 83-85 for the next update
moel@228
   196
                      int[] masks = { 0x05, 0x03, 0x06 };
moel@228
   197
                      superIO.WriteGPIO(7,
moel@228
   198
                        (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));
moel@228
   199
                      fanIndex = (fanIndex + 1) % 3;
moel@228
   200
                    };
moel@228
   201
                  }
moel@228
   202
moel@221
   203
                  break;
moel@221
   204
                default:
moel@221
   205
                  v.Add(new Voltage("CPU VCore", 0));
moel@221
   206
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@221
   207
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@221
   208
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@221
   209
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@221
   210
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@221
   211
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@221
   212
                  v.Add(new Voltage("Voltage #8", 7, true));
moel@221
   213
                  v.Add(new Voltage("VBat", 8));
moel@221
   214
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221
   215
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221
   216
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@221
   217
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@221
   218
                  break;
moel@221
   219
              };
moel@221
   220
              break;
moel@221
   221
moel@130
   222
            case Manufacturer.DFI:
moel@130
   223
              switch (model) {
moel@168
   224
                case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130
   225
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   226
                  v.Add(new Voltage("FSB VTT", 1));
moel@130
   227
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   228
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   229
                  v.Add(new Voltage("+12V", 4, 30, 10));
moel@130
   230
                  v.Add(new Voltage("NB Core", 5));
moel@130
   231
                  v.Add(new Voltage("VDIMM", 6));
moel@195
   232
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130
   233
                  v.Add(new Voltage("VBat", 8));
moel@130
   234
                  t.Add(new Temperature("CPU", 0));
moel@130
   235
                  t.Add(new Temperature("System", 1));
moel@130
   236
                  t.Add(new Temperature("Chipset", 2));
moel@130
   237
                  f.Add(new Fan("Fan #1", 0));
moel@130
   238
                  f.Add(new Fan("Fan #2", 1));
moel@130
   239
                  f.Add(new Fan("Fan #3", 2));
moel@130
   240
                  break;
moel@168
   241
                case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130
   242
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   243
                  v.Add(new Voltage("VTT", 1));
moel@130
   244
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   245
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   246
                  v.Add(new Voltage("+12V", 4, 30, 10));
moel@130
   247
                  v.Add(new Voltage("CPU PLL", 5));
moel@130
   248
                  v.Add(new Voltage("DRAM", 6));
moel@195
   249
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130
   250
                  v.Add(new Voltage("VBat", 8));
moel@130
   251
                  t.Add(new Temperature("Chipset", 0));
moel@130
   252
                  t.Add(new Temperature("CPU PWM", 1));
moel@130
   253
                  t.Add(new Temperature("CPU", 2));
moel@130
   254
                  f.Add(new Fan("Fan #1", 0));
moel@130
   255
                  f.Add(new Fan("Fan #2", 1));
moel@130
   256
                  f.Add(new Fan("Fan #3", 2));
moel@130
   257
                  break;
moel@130
   258
                default:
moel@130
   259
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   260
                  v.Add(new Voltage("VTT", 1, true));
moel@130
   261
                  v.Add(new Voltage("+3.3V", 2, true));
moel@130
   262
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130
   263
                  v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130
   264
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   265
                  v.Add(new Voltage("DRAM", 6, true));
moel@130
   266
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130
   267
                  v.Add(new Voltage("VBat", 8));
moel@130
   268
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   269
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   270
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   271
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   272
                  break;
moel@130
   273
              }
moel@130
   274
              break;
moel@130
   275
moel@130
   276
            case Manufacturer.Gigabyte:
moel@130
   277
              switch (model) {
moel@168
   278
                case Model._965P_S3: // IT8718F
moel@130
   279
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   280
                  v.Add(new Voltage("DRAM", 1));
moel@130
   281
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   282
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   283
                  v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130
   284
                  v.Add(new Voltage("VBat", 8));
moel@130
   285
                  t.Add(new Temperature("System", 0));
moel@130
   286
                  t.Add(new Temperature("CPU", 1));
moel@130
   287
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   288
                  f.Add(new Fan("System Fan", 1));
moel@130
   289
                  break;
moel@168
   290
                case Model.EP45_DS3R: // IT8718F
moel@130
   291
                case Model.EP45_UD3R: 
moel@138
   292
                case Model.X38_DS5:    
moel@130
   293
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   294
                  v.Add(new Voltage("DRAM", 1));
moel@130
   295
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   296
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   297
                  v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130
   298
                  v.Add(new Voltage("VBat", 8));
moel@130
   299
                  t.Add(new Temperature("System", 0));
moel@130
   300
                  t.Add(new Temperature("CPU", 1));
moel@130
   301
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   302
                  f.Add(new Fan("System Fan #2", 1));
moel@130
   303
                  f.Add(new Fan("Power Fan", 2));
moel@130
   304
                  f.Add(new Fan("System Fan #1", 3));
moel@130
   305
                  break;
moel@168
   306
                case Model.EX58_EXTREME: // IT8720F 
moel@133
   307
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   308
                  v.Add(new Voltage("DRAM", 1));
moel@195
   309
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133
   310
                  v.Add(new Voltage("VBat", 8));
moel@133
   311
                  t.Add(new Temperature("System", 0));
moel@133
   312
                  t.Add(new Temperature("CPU", 1));
moel@138
   313
                  t.Add(new Temperature("Northbridge", 2));
moel@133
   314
                  f.Add(new Fan("CPU Fan", 0));
moel@133
   315
                  f.Add(new Fan("System Fan #2", 1));
moel@133
   316
                  f.Add(new Fan("Power Fan", 2));
moel@133
   317
                  f.Add(new Fan("System Fan #1", 3));
moel@133
   318
                  break;
moel@168
   319
                case Model.P35_DS3: // IT8718F 
moel@168
   320
                case Model.P35_DS3L: // IT8718F
moel@130
   321
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   322
                  v.Add(new Voltage("DRAM", 1));
moel@130
   323
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   324
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   325
                  v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130
   326
                  v.Add(new Voltage("VBat", 8));
moel@130
   327
                  t.Add(new Temperature("System", 0));
moel@130
   328
                  t.Add(new Temperature("CPU", 1));
moel@130
   329
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   330
                  f.Add(new Fan("System Fan #1", 1));
moel@130
   331
                  f.Add(new Fan("System Fan #2", 2));
moel@130
   332
                  f.Add(new Fan("Power Fan", 3));
moel@130
   333
                  break;
moel@168
   334
                case Model.P55_UD4: // IT8720F
moel@168
   335
                case Model.P55M_UD4: // IT8720F
moel@148
   336
                  v.Add(new Voltage("CPU VCore", 0));
moel@148
   337
                  v.Add(new Voltage("DRAM", 1));
moel@148
   338
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   339
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   340
                  v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148
   341
                  v.Add(new Voltage("VBat", 8));
moel@148
   342
                  t.Add(new Temperature("System", 0));
moel@148
   343
                  t.Add(new Temperature("CPU", 2));
moel@148
   344
                  f.Add(new Fan("CPU Fan", 0));
moel@148
   345
                  f.Add(new Fan("System Fan #2", 1));
moel@148
   346
                  f.Add(new Fan("Power Fan", 2));
moel@148
   347
                  f.Add(new Fan("System Fan #1", 3));
moel@148
   348
                  break;
moel@168
   349
                case Model.GA_MA770T_UD3: // IT8720F
moel@154
   350
                  v.Add(new Voltage("CPU VCore", 0));
moel@154
   351
                  v.Add(new Voltage("DRAM", 1));
moel@154
   352
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   353
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   354
                  v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154
   355
                  v.Add(new Voltage("VBat", 8));
moel@154
   356
                  t.Add(new Temperature("System", 0));
moel@154
   357
                  t.Add(new Temperature("CPU", 1));
moel@154
   358
                  f.Add(new Fan("CPU Fan", 0));
moel@154
   359
                  f.Add(new Fan("System Fan #1", 1));
moel@154
   360
                  f.Add(new Fan("System Fan #2", 2));
moel@154
   361
                  f.Add(new Fan("Power Fan", 3));
moel@154
   362
                  break;
moel@168
   363
                case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130
   364
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   365
                  v.Add(new Voltage("DRAM", 1));
moel@130
   366
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   367
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   368
                  v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130
   369
                  v.Add(new Voltage("VBat", 8));
moel@130
   370
                  t.Add(new Temperature("System", 0));
moel@130
   371
                  t.Add(new Temperature("CPU", 1));
moel@130
   372
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   373
                  f.Add(new Fan("System Fan", 1));
moel@130
   374
                  f.Add(new Fan("NB Fan", 2));
moel@130
   375
                  break;
moel@168
   376
                case Model.X58A_UD3R: // IT8720F 
moel@138
   377
                  v.Add(new Voltage("CPU VCore", 0));
moel@138
   378
                  v.Add(new Voltage("DRAM", 1));
moel@138
   379
                  v.Add(new Voltage("+3.3V", 2));
moel@195
   380
                  v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195
   381
                  v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138
   382
                  v.Add(new Voltage("VBat", 8));
moel@138
   383
                  t.Add(new Temperature("System", 0));
moel@138
   384
                  t.Add(new Temperature("CPU", 1));
moel@138
   385
                  t.Add(new Temperature("Northbridge", 2));
moel@138
   386
                  f.Add(new Fan("CPU Fan", 0));
moel@138
   387
                  f.Add(new Fan("System Fan #2", 1));
moel@138
   388
                  f.Add(new Fan("Power Fan", 2));
moel@138
   389
                  f.Add(new Fan("System Fan #1", 3));
moel@138
   390
                  break;
moel@130
   391
                default:
moel@130
   392
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   393
                  v.Add(new Voltage("DRAM", 1, true));
moel@130
   394
                  v.Add(new Voltage("+3.3V", 2, true));
moel@130
   395
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130
   396
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   397
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   398
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@257
   399
                  v.Add(new Voltage("Voltage #8", 7, true));
moel@130
   400
                  v.Add(new Voltage("VBat", 8));
moel@130
   401
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   402
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   403
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   404
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   405
                  break;
moel@130
   406
              }
moel@130
   407
              break;
moel@130
   408
moel@130
   409
            default:
moel@130
   410
              v.Add(new Voltage("CPU VCore", 0));
moel@130
   411
              v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   412
              v.Add(new Voltage("Voltage #3", 2, true));
moel@130
   413
              v.Add(new Voltage("Voltage #4", 3, true));
moel@130
   414
              v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   415
              v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   416
              v.Add(new Voltage("Voltage #7", 6, true));
moel@130
   417
              v.Add(new Voltage("Voltage #8", 7, true));
moel@130
   418
              v.Add(new Voltage("VBat", 8));
moel@130
   419
              for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   420
                t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   421
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   422
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   423
              break;
moel@130
   424
          }
moel@130
   425
          break;
moel@170
   426
moel@170
   427
        case Chip.IT8721F:
moel@277
   428
        case Chip.IT8728F:
moel@177
   429
          switch (manufacturer) {
moel@177
   430
            case Manufacturer.ECS:
moel@177
   431
              switch (model) {
moel@177
   432
                case Model.A890GXM_A: // IT8721F
moel@177
   433
                  v.Add(new Voltage("CPU VCore", 0));
moel@177
   434
                  v.Add(new Voltage("VDIMM", 1));
moel@177
   435
                  v.Add(new Voltage("NB Voltage", 2));
moel@195
   436
                  v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177
   437
                  // v.Add(new Voltage("VDIMM", 6, true));
moel@195
   438
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195
   439
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@177
   440
                  t.Add(new Temperature("CPU", 0));
moel@177
   441
                  t.Add(new Temperature("System", 1));
moel@177
   442
                  t.Add(new Temperature("Northbridge", 2));
moel@177
   443
                  f.Add(new Fan("CPU Fan", 0));
moel@177
   444
                  f.Add(new Fan("System Fan", 1));
moel@177
   445
                  f.Add(new Fan("Power Fan", 2));
moel@177
   446
                  break;
moel@177
   447
                default:
moel@177
   448
                  v.Add(new Voltage("Voltage #1", 0, true));
moel@177
   449
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@177
   450
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@177
   451
                  v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177
   452
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@177
   453
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@177
   454
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@177
   455
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195
   456
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@177
   457
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177
   458
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177
   459
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@177
   460
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@177
   461
                  break;
moel@177
   462
              }
moel@177
   463
              break;
moel@278
   464
            case Manufacturer.Gigabyte:
moel@278
   465
              switch (model) {
moel@290
   466
                case Model.P67A_UD4_B3: // IT8728F
moel@278
   467
                  v.Add(new Voltage("+12V", 0, 100, 10));
moel@278
   468
                  v.Add(new Voltage("+5V", 1, 15, 10));
moel@278
   469
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@278
   470
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@278
   471
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@278
   472
                  v.Add(new Voltage("CPU VCore", 5));
moel@278
   473
                  v.Add(new Voltage("DRAM", 6));
moel@278
   474
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278
   475
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@278
   476
                  t.Add(new Temperature("System", 0));
moel@278
   477
                  t.Add(new Temperature("CPU", 2));
moel@278
   478
                  f.Add(new Fan("CPU Fan", 0));
moel@278
   479
                  f.Add(new Fan("System Fan #2", 1));
moel@278
   480
                  f.Add(new Fan("Power Fan", 2));
moel@278
   481
                  f.Add(new Fan("System Fan #1", 3));
moel@278
   482
                  break;
moel@290
   483
                case Model.H67A_UD3H_B3: // IT8728F
moel@290
   484
                  v.Add(new Voltage("VTT", 0));
moel@290
   485
                  v.Add(new Voltage("+5V", 1, 15, 10));
moel@290
   486
                  v.Add(new Voltage("+12V", 2, 68, 22));
moel@290
   487
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@290
   488
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@290
   489
                  v.Add(new Voltage("CPU VCore", 5));
moel@290
   490
                  v.Add(new Voltage("DRAM", 6));
moel@290
   491
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290
   492
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@290
   493
                  t.Add(new Temperature("System", 0));
moel@290
   494
                  t.Add(new Temperature("CPU", 2));
moel@290
   495
                  f.Add(new Fan("CPU Fan", 0));
moel@290
   496
                  f.Add(new Fan("System Fan #1", 1));
moel@290
   497
                  f.Add(new Fan("Power Fan", 2));
moel@290
   498
                  f.Add(new Fan("System Fan #2", 3));
moel@290
   499
                  break;
moel@305
   500
                case Model.Z68X_UD7_B3: // IT8728F
moel@305
   501
                  v.Add(new Voltage("VTT", 0));
moel@305
   502
                  v.Add(new Voltage("+5V", 1, 15, 10));
moel@305
   503
                  v.Add(new Voltage("+12V", 2, 68, 22));
moel@305
   504
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@305
   505
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@305
   506
                  v.Add(new Voltage("CPU VCore", 5));
moel@305
   507
                  v.Add(new Voltage("DRAM", 6));
moel@305
   508
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305
   509
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@305
   510
                  t.Add(new Temperature("System", 0));
moel@305
   511
                  t.Add(new Temperature("CPU", 1));
moel@305
   512
                  t.Add(new Temperature("System 3", 2));
moel@305
   513
                  f.Add(new Fan("CPU Fan", 0));
moel@305
   514
                  f.Add(new Fan("Power Fan", 1));
moel@305
   515
                  f.Add(new Fan("System Fan #1", 2));
moel@305
   516
                  f.Add(new Fan("System Fan #2", 3));
moel@305
   517
                  f.Add(new Fan("System Fan #3", 4));
moel@305
   518
                  break;
moel@278
   519
                default:
moel@278
   520
                  v.Add(new Voltage("Voltage #1", 0, true));
moel@278
   521
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@278
   522
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@278
   523
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@278
   524
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@278
   525
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@278
   526
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@278
   527
                  v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278
   528
                  v.Add(new Voltage("VBat", 8, 10, 10));
moel@278
   529
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278
   530
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278
   531
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@278
   532
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@278
   533
                  break;
moel@278
   534
              }
moel@278
   535
              break;
moel@177
   536
            default:
moel@177
   537
              v.Add(new Voltage("Voltage #1", 0, true));
moel@177
   538
              v.Add(new Voltage("Voltage #2", 1, true));
moel@177
   539
              v.Add(new Voltage("Voltage #3", 2, true));
moel@277
   540
              v.Add(new Voltage("Voltage #4", 3, true));
moel@177
   541
              v.Add(new Voltage("Voltage #5", 4, true));
moel@177
   542
              v.Add(new Voltage("Voltage #6", 5, true));
moel@177
   543
              v.Add(new Voltage("Voltage #7", 6, true));
moel@177
   544
              v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195
   545
              v.Add(new Voltage("VBat", 8, 10, 10));
moel@177
   546
              for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177
   547
                t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177
   548
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@177
   549
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@177
   550
              break;
moel@177
   551
          }
moel@170
   552
          break;
moel@130
   553
          
moel@130
   554
        case Chip.F71858:
moel@195
   555
          v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195
   556
          v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195
   557
          v.Add(new Voltage("Battery", 2, 150, 150));
moel@130
   558
          for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   559
            t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   560
          for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   561
            f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   562
          break;
moel@130
   563
        case Chip.F71862: 
moel@130
   564
        case Chip.F71869: 
moel@130
   565
        case Chip.F71882:
moel@296
   566
        case Chip.F71889AD: 
moel@130
   567
        case Chip.F71889ED: 
moel@130
   568
        case Chip.F71889F:
moel@132
   569
          switch (manufacturer) {
moel@132
   570
            case Manufacturer.EVGA:
moel@132
   571
              switch (model) {
moel@168
   572
                case Model.X58_SLI_Classified: // F71882 
moel@195
   573
                  v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195
   574
                  v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195
   575
                  v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195
   576
                  v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195
   577
                  v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195
   578
                  v.Add(new Voltage("+5V", 5, 51, 12));
moel@195
   579
                  v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195
   580
                  v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195
   581
                  v.Add(new Voltage("VBat", 8, 150, 150));
moel@132
   582
                  t.Add(new Temperature("CPU", 0));
moel@132
   583
                  t.Add(new Temperature("VREG", 1));
moel@132
   584
                  t.Add(new Temperature("System", 2));
moel@132
   585
                  f.Add(new Fan("CPU Fan", 0));
moel@132
   586
                  f.Add(new Fan("Power Fan", 1));
moel@132
   587
                  f.Add(new Fan("Chassis Fan", 2));
moel@132
   588
                  break;
moel@132
   589
                default:
moel@195
   590
                  v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132
   591
                  v.Add(new Voltage("CPU VCore", 1));
moel@132
   592
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@132
   593
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@132
   594
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@132
   595
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@132
   596
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@195
   597
                  v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195
   598
                  v.Add(new Voltage("VBat", 8, 150, 150));
moel@132
   599
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132
   600
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132
   601
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@132
   602
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@132
   603
                  break;
moel@132
   604
              }
moel@132
   605
              break;
moel@132
   606
            default:
moel@195
   607
              v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132
   608
              v.Add(new Voltage("CPU VCore", 1));
moel@132
   609
              v.Add(new Voltage("Voltage #3", 2, true));
moel@132
   610
              v.Add(new Voltage("Voltage #4", 3, true));
moel@132
   611
              v.Add(new Voltage("Voltage #5", 4, true));
moel@132
   612
              v.Add(new Voltage("Voltage #6", 5, true));
moel@132
   613
              v.Add(new Voltage("Voltage #7", 6, true));
moel@195
   614
              v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195
   615
              v.Add(new Voltage("VBat", 8, 150, 150));
moel@132
   616
              for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132
   617
                t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132
   618
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@132
   619
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@132
   620
              break;
moel@132
   621
          }
moel@130
   622
          break;
moel@130
   623
moel@220
   624
        case Chip.W83627EHF:
moel@220
   625
          switch (manufacturer) {
moel@220
   626
            case Manufacturer.ASRock:
moel@220
   627
              switch (model) {
moel@220
   628
                case Model.AOD790GX_128M: // W83627EHF
moel@220
   629
                  v.Add(new Voltage("CPU VCore", 0));
moel@220
   630
                  v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220
   631
                  v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220
   632
                  v.Add(new Voltage("+5V", 5, 20, 10));
moel@220
   633
                  v.Add(new Voltage("+12V", 6, 28, 5));
moel@220
   634
                  v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220
   635
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220
   636
                  t.Add(new Temperature("CPU", 0));
moel@220
   637
                  t.Add(new Temperature("Motherboard", 2));
moel@221
   638
                  f.Add(new Fan("CPU Fan", 0));
moel@221
   639
                  f.Add(new Fan("Chassis Fan", 1));                 
moel@220
   640
                  break;
moel@220
   641
                default:
moel@220
   642
                  v.Add(new Voltage("CPU VCore", 0));
moel@220
   643
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@220
   644
                  v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220
   645
                  v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220
   646
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@220
   647
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@220
   648
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@220
   649
                  v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220
   650
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220
   651
                  v.Add(new Voltage("Voltage #10", 9, true));
moel@220
   652
                  t.Add(new Temperature("CPU", 0));
moel@220
   653
                  t.Add(new Temperature("Auxiliary", 1));
moel@220
   654
                  t.Add(new Temperature("System", 2));
moel@220
   655
                  f.Add(new Fan("System Fan", 0));
moel@220
   656
                  f.Add(new Fan("CPU Fan", 1));
moel@220
   657
                  f.Add(new Fan("Auxiliary Fan", 2));
moel@220
   658
                  f.Add(new Fan("CPU Fan #2", 3));
moel@220
   659
                  f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220
   660
                  break;
moel@220
   661
              } break;
moel@220
   662
            default:
moel@220
   663
              v.Add(new Voltage("CPU VCore", 0));
moel@220
   664
              v.Add(new Voltage("Voltage #2", 1, true));
moel@220
   665
              v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220
   666
              v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220
   667
              v.Add(new Voltage("Voltage #5", 4, true));
moel@220
   668
              v.Add(new Voltage("Voltage #6", 5, true));
moel@220
   669
              v.Add(new Voltage("Voltage #7", 6, true));
moel@220
   670
              v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220
   671
              v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220
   672
              v.Add(new Voltage("Voltage #10", 9, true));
moel@220
   673
              t.Add(new Temperature("CPU", 0));
moel@220
   674
              t.Add(new Temperature("Auxiliary", 1));
moel@220
   675
              t.Add(new Temperature("System", 2));
moel@220
   676
              f.Add(new Fan("System Fan", 0));
moel@220
   677
              f.Add(new Fan("CPU Fan", 1));
moel@220
   678
              f.Add(new Fan("Auxiliary Fan", 2));
moel@220
   679
              f.Add(new Fan("CPU Fan #2", 3));
moel@220
   680
              f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220
   681
              break;
moel@220
   682
          }
moel@130
   683
          break;
moel@130
   684
        case Chip.W83627DHG: 
moel@130
   685
        case Chip.W83627DHGP:                      
moel@130
   686
        case Chip.W83667HG:
moel@130
   687
        case Chip.W83667HGB:
moel@152
   688
          switch (manufacturer) {
moel@153
   689
            case Manufacturer.ASRock:
moel@153
   690
              switch (model) {
moel@168
   691
                case Model._880GMH_USB3: // W83627DHG-P
moel@153
   692
                  v.Add(new Voltage("CPU VCore", 0));
moel@195
   693
                  v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195
   694
                  v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195
   695
                  v.Add(new Voltage("+12V", 6, 56, 10));
moel@195
   696
                  v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195
   697
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153
   698
                  t.Add(new Temperature("CPU", 0));
moel@153
   699
                  t.Add(new Temperature("Motherboard", 2));
moel@153
   700
                  f.Add(new Fan("Chassis Fan", 0));
moel@153
   701
                  f.Add(new Fan("CPU Fan", 1));
moel@153
   702
                  f.Add(new Fan("Power Fan", 2));
moel@153
   703
                  break;
moel@153
   704
                default:
moel@153
   705
                  v.Add(new Voltage("CPU VCore", 0));
moel@153
   706
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@195
   707
                  v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195
   708
                  v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153
   709
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@153
   710
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@153
   711
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@195
   712
                  v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195
   713
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153
   714
                  t.Add(new Temperature("CPU", 0));
moel@153
   715
                  t.Add(new Temperature("Auxiliary", 1));
moel@153
   716
                  t.Add(new Temperature("System", 2));
moel@153
   717
                  f.Add(new Fan("System Fan", 0));
moel@153
   718
                  f.Add(new Fan("CPU Fan", 1));
moel@153
   719
                  f.Add(new Fan("Auxiliary Fan", 2));
moel@153
   720
                  f.Add(new Fan("CPU Fan #2", 3));
moel@153
   721
                  f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153
   722
                  break;
moel@153
   723
              }
moel@153
   724
              break;
moel@152
   725
            case Manufacturer.ASUS:
moel@152
   726
              switch (model) {
moel@174
   727
                case Model.P6X58D_E: // W83667HG                 
moel@174
   728
                case Model.Rampage_II_GENE: // W83667HG 
moel@152
   729
                  v.Add(new Voltage("CPU VCore", 0));
moel@195
   730
                  v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195
   731
                  v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195
   732
                  v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195
   733
                  v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195
   734
                  v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195
   735
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174
   736
                  t.Add(new Temperature("CPU", 0));
moel@174
   737
                  t.Add(new Temperature("Motherboard", 2));
moel@174
   738
                  f.Add(new Fan("Chassis Fan #1", 0));
moel@174
   739
                  f.Add(new Fan("CPU Fan", 1));
moel@174
   740
                  f.Add(new Fan("Power Fan", 2));
moel@174
   741
                  f.Add(new Fan("Chassis Fan #2", 3));
moel@174
   742
                  f.Add(new Fan("Chassis Fan #3", 4));
moel@174
   743
                  break;
moel@174
   744
                case Model.Rampage_Extreme: // W83667HG 
moel@174
   745
                  v.Add(new Voltage("CPU VCore", 0));
moel@195
   746
                  v.Add(new Voltage("+12V", 1, 12, 2));
moel@195
   747
                  v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195
   748
                  v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195
   749
                  v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195
   750
                  v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195
   751
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152
   752
                  t.Add(new Temperature("CPU", 0));
moel@152
   753
                  t.Add(new Temperature("Motherboard", 2));
moel@152
   754
                  f.Add(new Fan("Chassis Fan #1", 0));
moel@153
   755
                  f.Add(new Fan("CPU Fan", 1));
moel@153
   756
                  f.Add(new Fan("Power Fan", 2));
moel@152
   757
                  f.Add(new Fan("Chassis Fan #2", 3));
moel@152
   758
                  f.Add(new Fan("Chassis Fan #3", 4));
moel@152
   759
                  break;
moel@152
   760
                default:
moel@152
   761
                  v.Add(new Voltage("CPU VCore", 0));
moel@152
   762
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@195
   763
                  v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195
   764
                  v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152
   765
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@152
   766
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@152
   767
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@195
   768
                  v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195
   769
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152
   770
                  t.Add(new Temperature("CPU", 0));
moel@152
   771
                  t.Add(new Temperature("Auxiliary", 1));
moel@152
   772
                  t.Add(new Temperature("System", 2));
moel@153
   773
                  f.Add(new Fan("System Fan", 0));
moel@153
   774
                  f.Add(new Fan("CPU Fan", 1));
moel@153
   775
                  f.Add(new Fan("Auxiliary Fan", 2));
moel@153
   776
                  f.Add(new Fan("CPU Fan #2", 3));
moel@153
   777
                  f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152
   778
                  break;
moel@152
   779
              }
moel@152
   780
              break;
moel@152
   781
            default:
moel@152
   782
              v.Add(new Voltage("CPU VCore", 0));
moel@152
   783
              v.Add(new Voltage("Voltage #2", 1, true));
moel@195
   784
              v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195
   785
              v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152
   786
              v.Add(new Voltage("Voltage #5", 4, true));
moel@152
   787
              v.Add(new Voltage("Voltage #6", 5, true));
moel@152
   788
              v.Add(new Voltage("Voltage #7", 6, true));
moel@195
   789
              v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195
   790
              v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152
   791
              t.Add(new Temperature("CPU", 0));
moel@152
   792
              t.Add(new Temperature("Auxiliary", 1));
moel@152
   793
              t.Add(new Temperature("System", 2));
moel@153
   794
              f.Add(new Fan("System Fan", 0));
moel@153
   795
              f.Add(new Fan("CPU Fan", 1));
moel@153
   796
              f.Add(new Fan("Auxiliary Fan", 2));
moel@153
   797
              f.Add(new Fan("CPU Fan #2", 3));
moel@153
   798
              f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152
   799
              break;
moel@152
   800
          } 
moel@130
   801
          break;
moel@130
   802
        case Chip.W83627HF: 
moel@130
   803
        case Chip.W83627THF: 
moel@130
   804
        case Chip.W83687THF:
moel@130
   805
          v.Add(new Voltage("CPU VCore", 0));
moel@130
   806
          v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   807
          v.Add(new Voltage("Voltage #3", 2, true));
moel@195
   808
          v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130
   809
          v.Add(new Voltage("Voltage #5", 4, true));
moel@195
   810
          v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130
   811
          v.Add(new Voltage("VBAT", 6));
moel@130
   812
          t.Add(new Temperature("CPU", 0));
moel@130
   813
          t.Add(new Temperature("Auxiliary", 1));
moel@130
   814
          t.Add(new Temperature("System", 2));
moel@153
   815
          f.Add(new Fan("System Fan", 0));
moel@153
   816
          f.Add(new Fan("CPU Fan", 1));
moel@153
   817
          f.Add(new Fan("Auxiliary Fan", 2));
moel@130
   818
          break;
moel@245
   819
        case Chip.NCT6771F:
moel@265
   820
        case Chip.NCT6776F:
moel@265
   821
          switch (manufacturer) {
moel@265
   822
            case Manufacturer.ASUS:
moel@265
   823
              switch (model) {
moel@265
   824
                case Model.P8P67_PRO: // NCT6776F
moel@265
   825
                  v.Add(new Voltage("CPU VCore", 0));
moel@265
   826
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@265
   827
                  v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265
   828
                  v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265
   829
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@265
   830
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@265
   831
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@265
   832
                  v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265
   833
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276
   834
                  t.Add(new Temperature("CPU", 1));
moel@276
   835
                  t.Add(new Temperature("Auxiliary", 2));
moel@276
   836
                  t.Add(new Temperature("System", 3));
moel@265
   837
                  f.Add(new Fan("System Fan", 0));
moel@265
   838
                  f.Add(new Fan("CPU Fan", 1));
moel@265
   839
                  f.Add(new Fan("Auxiliary Fan", 2));
moel@265
   840
                  f.Add(new Fan("Auxiliary Fan #2", 3));
moel@265
   841
                  f.Add(new Fan("Auxiliary Fan #3", 4));
moel@265
   842
                  break;
moel@276
   843
                case Model.P8P67_M_PRO: // NCT6776F
moel@276
   844
                  v.Add(new Voltage("CPU VCore", 0));
moel@276
   845
                  v.Add(new Voltage("+12V", 1, 11, 1));
moel@276
   846
                  v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@276
   847
                  v.Add(new Voltage("+3V", 3, 34, 34));
moel@276
   848
                  v.Add(new Voltage("+5V", 4, 12, 3));
moel@276
   849
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@276
   850
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@276
   851
                  v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276
   852
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276
   853
                  t.Add(new Temperature("CPU", 0));
moel@276
   854
                  t.Add(new Temperature("Motherboard", 3));
moel@276
   855
                  f.Add(new Fan("Chassis Fan #1", 0));
moel@276
   856
                  f.Add(new Fan("CPU Fan", 1));
moel@276
   857
                  f.Add(new Fan("Chassis Fan #2", 2));
moel@276
   858
                  f.Add(new Fan("Power Fan", 3));
moel@276
   859
                  f.Add(new Fan("Auxiliary Fan", 4));
moel@276
   860
                  break;
moel@265
   861
                default:
moel@265
   862
                  v.Add(new Voltage("CPU VCore", 0));
moel@265
   863
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@265
   864
                  v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265
   865
                  v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265
   866
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@265
   867
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@265
   868
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@265
   869
                  v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265
   870
                  v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265
   871
                  t.Add(new Temperature("CPU", 0));
moel@276
   872
                  t.Add(new Temperature("CPU", 1));
moel@276
   873
                  t.Add(new Temperature("Auxiliary", 2));
moel@276
   874
                  t.Add(new Temperature("System", 3));
moel@265
   875
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@265
   876
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@265
   877
                  break;
moel@265
   878
              }
moel@265
   879
              break;
moel@265
   880
            default:
moel@265
   881
              v.Add(new Voltage("CPU VCore", 0));
moel@265
   882
              v.Add(new Voltage("Voltage #2", 1, true));
moel@265
   883
              v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265
   884
              v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265
   885
              v.Add(new Voltage("Voltage #5", 4, true));
moel@265
   886
              v.Add(new Voltage("Voltage #6", 5, true));
moel@265
   887
              v.Add(new Voltage("Voltage #7", 6, true));
moel@265
   888
              v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265
   889
              v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265
   890
              t.Add(new Temperature("CPU", 0));
moel@276
   891
              t.Add(new Temperature("CPU", 1));
moel@276
   892
              t.Add(new Temperature("Auxiliary", 2));
moel@276
   893
              t.Add(new Temperature("System", 3));
moel@265
   894
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@265
   895
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@265
   896
              break;
moel@265
   897
          }
moel@245
   898
          break;
moel@130
   899
        default:
moel@130
   900
          for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130
   901
            v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130
   902
          for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   903
            t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   904
          for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   905
            f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   906
          break;
moel@130
   907
      }
moel@130
   908
moel@195
   909
      const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130
   910
      foreach (Voltage voltage in v) 
moel@130
   911
        if (voltage.Index < superIO.Voltages.Length) {
moel@130
   912
          Sensor sensor = new Sensor(voltage.Name, voltage.Index, 
moel@195
   913
            voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130
   914
            new ParameterDescription("Ri [kΩ]", "Input resistance.\n" + 
moel@130
   915
              formula, voltage.Ri),
moel@130
   916
            new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" + 
moel@130
   917
              formula, voltage.Rf),
moel@130
   918
            new ParameterDescription("Vf [V]", "Reference voltage.\n" + 
moel@130
   919
              formula, voltage.Vf)
moel@165
   920
            }, settings);
moel@130
   921
          voltages.Add(sensor);
moel@130
   922
      }
moel@130
   923
moel@130
   924
      foreach (Temperature temperature in t) 
moel@130
   925
        if (temperature.Index < superIO.Temperatures.Length) {
moel@134
   926
        Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195
   927
          SensorType.Temperature, this, new [] {
moel@130
   928
          new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165
   929
        }, settings);
moel@130
   930
        temperatures.Add(sensor);
moel@130
   931
      }
moel@130
   932
moel@130
   933
      foreach (Fan fan in f)
moel@130
   934
        if (fan.Index < superIO.Fans.Length) {
moel@134
   935
          Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165
   936
            this, settings);
moel@130
   937
          fans.Add(sensor);
moel@130
   938
        }
moel@130
   939
    }
moel@130
   940
moel@165
   941
    public override HardwareType HardwareType {
moel@165
   942
      get { return HardwareType.SuperIO; }
moel@130
   943
    }
moel@130
   944
moel@176
   945
    public override IHardware Parent {
moel@176
   946
      get { return mainboard; }
moel@176
   947
    }
moel@176
   948
moel@130
   949
moel@130
   950
    public override string GetReport() {
moel@130
   951
      return superIO.GetReport();
moel@130
   952
    }
moel@130
   953
moel@130
   954
    public override void Update() {
moel@130
   955
      superIO.Update();
moel@130
   956
moel@130
   957
      foreach (Sensor sensor in voltages) {
moel@228
   958
        float? value = readVoltage(sensor.Index);
moel@130
   959
        if (value.HasValue) {
moel@130
   960
          sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130
   961
            sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130
   962
          ActivateSensor(sensor);
moel@130
   963
        }
moel@130
   964
      }
moel@130
   965
moel@130
   966
      foreach (Sensor sensor in temperatures) {
moel@228
   967
        float? value = readTemperature(sensor.Index);
moel@130
   968
        if (value.HasValue) {
moel@130
   969
          sensor.Value = value + sensor.Parameters[0].Value;
moel@130
   970
          ActivateSensor(sensor);
moel@130
   971
        }
moel@130
   972
      }
moel@130
   973
moel@130
   974
      foreach (Sensor sensor in fans) {
moel@228
   975
        float? value = readFan(sensor.Index);
moel@130
   976
        if (value.HasValue) {
moel@130
   977
          sensor.Value = value;
moel@130
   978
          if (value.Value > 0)
moel@130
   979
            ActivateSensor(sensor);
moel@130
   980
        }
moel@130
   981
      }
moel@228
   982
moel@228
   983
      postUpdate();
moel@130
   984
    }
moel@130
   985
moel@130
   986
    private class Voltage {
moel@130
   987
      public readonly string Name;
moel@130
   988
      public readonly int Index;
moel@130
   989
      public readonly float Ri;
moel@130
   990
      public readonly float Rf;
moel@130
   991
      public readonly float Vf;
moel@130
   992
      public readonly bool Hidden;
moel@130
   993
moel@202
   994
      public Voltage(string name, int index) :
moel@202
   995
        this(name, index, false) { }
moel@202
   996
      
moel@130
   997
      public Voltage(string name, int index, bool hidden) :
moel@130
   998
        this(name, index, 0, 1, 0, hidden) { }
moel@202
   999
      
moel@202
  1000
      public Voltage(string name, int index, float ri, float rf) :
moel@202
  1001
        this(name, index, ri, rf, 0, false) { }
moel@202
  1002
      
moel@202
  1003
      // float ri = 0, float rf = 1, float vf = 0, bool hidden = false) 
moel@202
  1004
      
moel@195
  1005
      public Voltage(string name, int index, 
moel@202
  1006
        float ri, float rf, float vf, bool hidden) 
moel@195
  1007
      {
moel@130
  1008
        this.Name = name;
moel@130
  1009
        this.Index = index;
moel@130
  1010
        this.Ri = ri;
moel@130
  1011
        this.Rf = rf;
moel@130
  1012
        this.Vf = vf;
moel@130
  1013
        this.Hidden = hidden;
moel@130
  1014
      }
moel@130
  1015
    }
moel@130
  1016
moel@130
  1017
    private class Temperature {
moel@130
  1018
      public readonly string Name;
moel@130
  1019
      public readonly int Index;
moel@130
  1020
moel@167
  1021
      public Temperature(string name, int index) {
moel@130
  1022
        this.Name = name;
moel@130
  1023
        this.Index = index;
moel@130
  1024
      }
moel@130
  1025
    }
moel@130
  1026
moel@130
  1027
    private class Fan {
moel@130
  1028
      public readonly string Name;
moel@130
  1029
      public readonly int Index;
moel@130
  1030
moel@130
  1031
      public Fan(string name, int index) {
moel@130
  1032
        this.Name = name;
moel@130
  1033
        this.Index = index;
moel@130
  1034
      }
moel@130
  1035
    }
moel@130
  1036
  }
moel@130
  1037
}