OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@803f98bf1418 (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@265	19	Portions created by the Initial Developer are Copyright (C) 2009-2011
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@228	38	using System;
moel@130	39	using System.Collections.Generic;
moel@166	40	using System.Globalization;
moel@228	41	using System.Threading;
moel@130	42	using OpenHardwareMonitor.Hardware.LPC;
moel@130	43
moel@130	44	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	45	internal class SuperIOHardware : Hardware {
moel@130	46
moel@195	47	private readonly Mainboard mainboard;
moel@195	48	private readonly ISuperIO superIO;
moel@130	49
moel@195	50	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	51	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	52	private readonly List<Sensor> fans = new List<Sensor>();
moel@167	53
moel@228	54	private delegate float? ReadValueDelegate(int index);
moel@228	55	private delegate void UpdateDelegate();
moel@228	56
moel@228	57	// delegates for mainboard specific sensor reading code
moel@228	58	private readonly ReadValueDelegate readVoltage;
moel@228	59	private readonly ReadValueDelegate readTemperature;
moel@228	60	private readonly ReadValueDelegate readFan;
moel@228	61
moel@228	62	// delegate for post update mainboard specific code
moel@228	63	private readonly UpdateDelegate postUpdate;
moel@228	64
moel@228	65	// mainboard specific mutex
moel@228	66	private readonly Mutex mutex;
moel@228	67
moel@176	68	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	69	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	70	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	71	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	72	settings)
moel@130	73	{
moel@176	74	this.mainboard = mainboard;
moel@130	75	this.superIO = superIO;
moel@130	76
moel@228	77	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	78	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	79	this.readFan = (index) => superIO.Fans[index];
moel@228	80
moel@228	81	this.postUpdate = () => { };
moel@228	82
moel@130	83	List<Voltage> v = new List<Voltage>();
moel@130	84	List<Temperature> t = new List<Temperature>();
moel@130	85	List<Fan> f = new List<Fan>();
moel@130	86
moel@130	87	switch (superIO.Chip) {
moel@130	88	case Chip.IT8712F:
moel@130	89	case Chip.IT8716F:
moel@130	90	case Chip.IT8718F:
moel@177	91	case Chip.IT8720F:
moel@130	92	case Chip.IT8726F:
moel@130	93	switch (manufacturer) {
moel@133	94	case Manufacturer.ASUS:
moel@133	95	switch (model) {
moel@168	96	case Model.Crosshair_III_Formula: // IT8720F
moel@133	97	v.Add(new Voltage("VBat", 8));
moel@133	98	t.Add(new Temperature("CPU", 0));
moel@133	99	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	100	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	101	break;
moel@144	102	case Model.M2N_SLI_DELUXE:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("+3.3V", 1));
moel@195	105	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	106	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	107	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	108	v.Add(new Voltage("VBat", 8));
moel@133	109	t.Add(new Temperature("CPU", 0));
moel@133	110	t.Add(new Temperature("Motherboard", 1));
moel@133	111	f.Add(new Fan("CPU Fan", 0));
moel@133	112	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	113	f.Add(new Fan("Power Fan", 2));
moel@133	114	break;
moel@168	115	case Model.M4A79XTD_EVO: // IT8720F
moel@195	116	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	117	v.Add(new Voltage("VBat", 8));
moel@144	118	t.Add(new Temperature("CPU", 0));
moel@144	119	t.Add(new Temperature("Motherboard", 1));
moel@144	120	f.Add(new Fan("CPU Fan", 0));
moel@144	121	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	122	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	123	break;
moel@133	124	default:
moel@133	125	v.Add(new Voltage("CPU VCore", 0));
moel@133	126	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	127	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	128	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	129	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	130	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	131	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	132	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	133	v.Add(new Voltage("VBat", 8));
moel@133	134	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	135	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	136	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	137	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	138	break;
moel@133	139	}
moel@133	140	break;
moel@221	141
moel@221	142	case Manufacturer.ASRock:
moel@221	143	switch (model) {
moel@221	144	case Model.P55_Deluxe: // IT8720F
moel@228	145
moel@221	146	v.Add(new Voltage("CPU VCore", 0));
moel@221	147	v.Add(new Voltage("+3.3V", 2));
moel@221	148	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	149	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	150	v.Add(new Voltage("VBat", 8));
moel@221	151	t.Add(new Temperature("CPU", 0));
moel@221	152	t.Add(new Temperature("Motherboard", 1));
moel@221	153	f.Add(new Fan("CPU Fan", 0));
moel@221	154	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	155
moel@228	156	// this mutex is also used by the official ASRock tool
moel@228	157	mutex = new Mutex(false, "ASRockOCMark");
moel@228	158
moel@228	159	bool exclusiveAccess = false;
moel@228	160	try {
moel@228	161	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	162	} catch (AbandonedMutexException) { }
moel@228	163	catch (InvalidOperationException) { }
moel@228	164
moel@228	165	// only read additional fans if we get exclusive access
moel@228	166	if (exclusiveAccess) {
moel@228	167
moel@228	168	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	169	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	170	f.Add(new Fan("Power Fan", 4));
moel@228	171
moel@228	172	readFan = (index) => {
moel@228	173	if (index < 2) {
moel@228	174	return superIO.Fans[index];
moel@228	175	} else {
moel@228	176	// get GPIO 80-87
moel@228	177	byte? gpio = superIO.ReadGPIO(7);
moel@228	178	if (!gpio.HasValue)
moel@228	179	return null;
moel@228	180
moel@228	181	// read the last 3 fans based on GPIO 83-85
moel@228	182	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	183	return (((gpio.Value >> 3) & 0x07) ==
moel@228	184	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	185	}
moel@228	186	};
moel@228	187
moel@228	188	int fanIndex = 0;
moel@228	189	postUpdate = () => {
moel@228	190	// get GPIO 80-87
moel@228	191	byte? gpio = superIO.ReadGPIO(7);
moel@228	192	if (!gpio.HasValue)
moel@228	193	return;
moel@228	194
moel@228	195	// prepare the GPIO 83-85 for the next update
moel@228	196	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	197	superIO.WriteGPIO(7,
moel@228	198	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	199	fanIndex = (fanIndex + 1) % 3;
moel@228	200	};
moel@228	201	}
moel@228	202
moel@221	203	break;
moel@221	204	default:
moel@221	205	v.Add(new Voltage("CPU VCore", 0));
moel@221	206	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	207	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	208	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	209	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	210	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	211	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	212	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	213	v.Add(new Voltage("VBat", 8));
moel@221	214	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	215	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	216	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	217	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	218	break;
moel@221	219	};
moel@221	220	break;
moel@221	221
moel@130	222	case Manufacturer.DFI:
moel@130	223	switch (model) {
moel@168	224	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	225	v.Add(new Voltage("CPU VCore", 0));
moel@130	226	v.Add(new Voltage("FSB VTT", 1));
moel@130	227	v.Add(new Voltage("+3.3V", 2));
moel@195	228	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	229	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	230	v.Add(new Voltage("NB Core", 5));
moel@130	231	v.Add(new Voltage("VDIMM", 6));
moel@195	232	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	233	v.Add(new Voltage("VBat", 8));
moel@130	234	t.Add(new Temperature("CPU", 0));
moel@130	235	t.Add(new Temperature("System", 1));
moel@130	236	t.Add(new Temperature("Chipset", 2));
moel@130	237	f.Add(new Fan("Fan #1", 0));
moel@130	238	f.Add(new Fan("Fan #2", 1));
moel@130	239	f.Add(new Fan("Fan #3", 2));
moel@130	240	break;
moel@168	241	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	242	v.Add(new Voltage("CPU VCore", 0));
moel@130	243	v.Add(new Voltage("VTT", 1));
moel@130	244	v.Add(new Voltage("+3.3V", 2));
moel@195	245	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	246	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	247	v.Add(new Voltage("CPU PLL", 5));
moel@130	248	v.Add(new Voltage("DRAM", 6));
moel@195	249	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	250	v.Add(new Voltage("VBat", 8));
moel@130	251	t.Add(new Temperature("Chipset", 0));
moel@130	252	t.Add(new Temperature("CPU PWM", 1));
moel@130	253	t.Add(new Temperature("CPU", 2));
moel@130	254	f.Add(new Fan("Fan #1", 0));
moel@130	255	f.Add(new Fan("Fan #2", 1));
moel@130	256	f.Add(new Fan("Fan #3", 2));
moel@130	257	break;
moel@130	258	default:
moel@130	259	v.Add(new Voltage("CPU VCore", 0));
moel@130	260	v.Add(new Voltage("VTT", 1, true));
moel@130	261	v.Add(new Voltage("+3.3V", 2, true));
moel@130	262	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	263	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	264	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	265	v.Add(new Voltage("DRAM", 6, true));
moel@130	266	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	267	v.Add(new Voltage("VBat", 8));
moel@130	268	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	269	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	270	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	271	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	272	break;
moel@130	273	}
moel@130	274	break;
moel@130	275
moel@130	276	case Manufacturer.Gigabyte:
moel@130	277	switch (model) {
moel@168	278	case Model._965P_S3: // IT8718F
moel@130	279	v.Add(new Voltage("CPU VCore", 0));
moel@130	280	v.Add(new Voltage("DRAM", 1));
moel@130	281	v.Add(new Voltage("+3.3V", 2));
moel@195	282	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	283	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	284	v.Add(new Voltage("VBat", 8));
moel@130	285	t.Add(new Temperature("System", 0));
moel@130	286	t.Add(new Temperature("CPU", 1));
moel@130	287	f.Add(new Fan("CPU Fan", 0));
moel@130	288	f.Add(new Fan("System Fan", 1));
moel@130	289	break;
moel@168	290	case Model.EP45_DS3R: // IT8718F
moel@130	291	case Model.EP45_UD3R:
moel@138	292	case Model.X38_DS5:
moel@130	293	v.Add(new Voltage("CPU VCore", 0));
moel@130	294	v.Add(new Voltage("DRAM", 1));
moel@130	295	v.Add(new Voltage("+3.3V", 2));
moel@195	296	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	297	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	298	v.Add(new Voltage("VBat", 8));
moel@130	299	t.Add(new Temperature("System", 0));
moel@130	300	t.Add(new Temperature("CPU", 1));
moel@130	301	f.Add(new Fan("CPU Fan", 0));
moel@130	302	f.Add(new Fan("System Fan #2", 1));
moel@130	303	f.Add(new Fan("Power Fan", 2));
moel@130	304	f.Add(new Fan("System Fan #1", 3));
moel@130	305	break;
moel@168	306	case Model.EX58_EXTREME: // IT8720F
moel@133	307	v.Add(new Voltage("CPU VCore", 0));
moel@133	308	v.Add(new Voltage("DRAM", 1));
moel@195	309	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	310	v.Add(new Voltage("VBat", 8));
moel@133	311	t.Add(new Temperature("System", 0));
moel@133	312	t.Add(new Temperature("CPU", 1));
moel@138	313	t.Add(new Temperature("Northbridge", 2));
moel@133	314	f.Add(new Fan("CPU Fan", 0));
moel@133	315	f.Add(new Fan("System Fan #2", 1));
moel@133	316	f.Add(new Fan("Power Fan", 2));
moel@133	317	f.Add(new Fan("System Fan #1", 3));
moel@133	318	break;
moel@168	319	case Model.P35_DS3: // IT8718F
moel@168	320	case Model.P35_DS3L: // IT8718F
moel@130	321	v.Add(new Voltage("CPU VCore", 0));
moel@130	322	v.Add(new Voltage("DRAM", 1));
moel@130	323	v.Add(new Voltage("+3.3V", 2));
moel@195	324	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	325	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	326	v.Add(new Voltage("VBat", 8));
moel@130	327	t.Add(new Temperature("System", 0));
moel@130	328	t.Add(new Temperature("CPU", 1));
moel@130	329	f.Add(new Fan("CPU Fan", 0));
moel@130	330	f.Add(new Fan("System Fan #1", 1));
moel@130	331	f.Add(new Fan("System Fan #2", 2));
moel@130	332	f.Add(new Fan("Power Fan", 3));
moel@130	333	break;
moel@168	334	case Model.P55_UD4: // IT8720F
moel@168	335	case Model.P55M_UD4: // IT8720F
moel@148	336	v.Add(new Voltage("CPU VCore", 0));
moel@148	337	v.Add(new Voltage("DRAM", 1));
moel@148	338	v.Add(new Voltage("+3.3V", 2));
moel@195	339	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	340	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	341	v.Add(new Voltage("VBat", 8));
moel@148	342	t.Add(new Temperature("System", 0));
moel@148	343	t.Add(new Temperature("CPU", 2));
moel@148	344	f.Add(new Fan("CPU Fan", 0));
moel@148	345	f.Add(new Fan("System Fan #2", 1));
moel@148	346	f.Add(new Fan("Power Fan", 2));
moel@148	347	f.Add(new Fan("System Fan #1", 3));
moel@148	348	break;
moel@168	349	case Model.GA_MA770T_UD3: // IT8720F
moel@154	350	v.Add(new Voltage("CPU VCore", 0));
moel@154	351	v.Add(new Voltage("DRAM", 1));
moel@154	352	v.Add(new Voltage("+3.3V", 2));
moel@195	353	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	354	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	355	v.Add(new Voltage("VBat", 8));
moel@154	356	t.Add(new Temperature("System", 0));
moel@154	357	t.Add(new Temperature("CPU", 1));
moel@154	358	f.Add(new Fan("CPU Fan", 0));
moel@154	359	f.Add(new Fan("System Fan #1", 1));
moel@154	360	f.Add(new Fan("System Fan #2", 2));
moel@154	361	f.Add(new Fan("Power Fan", 3));
moel@154	362	break;
moel@168	363	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	364	v.Add(new Voltage("CPU VCore", 0));
moel@130	365	v.Add(new Voltage("DRAM", 1));
moel@130	366	v.Add(new Voltage("+3.3V", 2));
moel@195	367	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	368	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	369	v.Add(new Voltage("VBat", 8));
moel@130	370	t.Add(new Temperature("System", 0));
moel@130	371	t.Add(new Temperature("CPU", 1));
moel@130	372	f.Add(new Fan("CPU Fan", 0));
moel@130	373	f.Add(new Fan("System Fan", 1));
moel@130	374	f.Add(new Fan("NB Fan", 2));
moel@130	375	break;
moel@168	376	case Model.X58A_UD3R: // IT8720F
moel@138	377	v.Add(new Voltage("CPU VCore", 0));
moel@138	378	v.Add(new Voltage("DRAM", 1));
moel@138	379	v.Add(new Voltage("+3.3V", 2));
moel@195	380	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	381	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	382	v.Add(new Voltage("VBat", 8));
moel@138	383	t.Add(new Temperature("System", 0));
moel@138	384	t.Add(new Temperature("CPU", 1));
moel@138	385	t.Add(new Temperature("Northbridge", 2));
moel@138	386	f.Add(new Fan("CPU Fan", 0));
moel@138	387	f.Add(new Fan("System Fan #2", 1));
moel@138	388	f.Add(new Fan("Power Fan", 2));
moel@138	389	f.Add(new Fan("System Fan #1", 3));
moel@138	390	break;
moel@130	391	default:
moel@130	392	v.Add(new Voltage("CPU VCore", 0));
moel@130	393	v.Add(new Voltage("DRAM", 1, true));
moel@130	394	v.Add(new Voltage("+3.3V", 2, true));
moel@130	395	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	396	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	397	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	398	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	399	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	400	v.Add(new Voltage("VBat", 8));
moel@130	401	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	402	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	403	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	404	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	405	break;
moel@130	406	}
moel@130	407	break;
moel@130	408
moel@130	409	default:
moel@130	410	v.Add(new Voltage("CPU VCore", 0));
moel@130	411	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	412	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	413	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	414	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	415	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	416	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	417	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	418	v.Add(new Voltage("VBat", 8));
moel@130	419	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	420	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	421	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	422	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	423	break;
moel@130	424	}
moel@130	425	break;
moel@170	426
moel@170	427	case Chip.IT8721F:
moel@277	428	case Chip.IT8728F:
moel@177	429	switch (manufacturer) {
moel@177	430	case Manufacturer.ECS:
moel@177	431	switch (model) {
moel@177	432	case Model.A890GXM_A: // IT8721F
moel@177	433	v.Add(new Voltage("CPU VCore", 0));
moel@177	434	v.Add(new Voltage("VDIMM", 1));
moel@177	435	v.Add(new Voltage("NB Voltage", 2));
moel@195	436	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	437	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	438	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	439	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	440	t.Add(new Temperature("CPU", 0));
moel@177	441	t.Add(new Temperature("System", 1));
moel@177	442	t.Add(new Temperature("Northbridge", 2));
moel@177	443	f.Add(new Fan("CPU Fan", 0));
moel@177	444	f.Add(new Fan("System Fan", 1));
moel@177	445	f.Add(new Fan("Power Fan", 2));
moel@177	446	break;
moel@177	447	default:
moel@177	448	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	449	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	450	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	451	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	452	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	453	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	454	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	455	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	456	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	457	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	458	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	459	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	460	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	461	break;
moel@177	462	}
moel@177	463	break;
moel@278	464	case Manufacturer.Gigabyte:
moel@278	465	switch (model) {
moel@278	466	case Model.P67A_UD4_B3:
moel@278	467	v.Add(new Voltage("+12V", 0, 100, 10));
moel@278	468	v.Add(new Voltage("+5V", 1, 15, 10));
moel@278	469	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	470	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	471	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	472	v.Add(new Voltage("CPU VCore", 5));
moel@278	473	v.Add(new Voltage("DRAM", 6));
moel@278	474	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	475	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	476	t.Add(new Temperature("System", 0));
moel@278	477	t.Add(new Temperature("CPU", 2));
moel@278	478	f.Add(new Fan("CPU Fan", 0));
moel@278	479	f.Add(new Fan("System Fan #2", 1));
moel@278	480	f.Add(new Fan("Power Fan", 2));
moel@278	481	f.Add(new Fan("System Fan #1", 3));
moel@278	482	break;
moel@278	483	default:
moel@278	484	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	485	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	486	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	487	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	488	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	489	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	490	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	491	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	492	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	493	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	494	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	495	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	496	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	497	break;
moel@278	498	}
moel@278	499	break;
moel@177	500	default:
moel@177	501	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	502	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	503	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	504	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	505	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	506	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	507	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	508	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	509	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	510	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	511	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	512	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	513	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	514	break;
moel@177	515	}
moel@170	516	break;
moel@130	517
moel@130	518	case Chip.F71858:
moel@195	519	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	520	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	521	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	522	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	523	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	524	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	525	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	526	break;
moel@130	527	case Chip.F71862:
moel@130	528	case Chip.F71869:
moel@130	529	case Chip.F71882:
moel@130	530	case Chip.F71889ED:
moel@130	531	case Chip.F71889F:
moel@132	532	switch (manufacturer) {
moel@132	533	case Manufacturer.EVGA:
moel@132	534	switch (model) {
moel@168	535	case Model.X58_SLI_Classified: // F71882
moel@195	536	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	537	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	538	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	539	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	540	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	541	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	542	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	543	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	544	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	545	t.Add(new Temperature("CPU", 0));
moel@132	546	t.Add(new Temperature("VREG", 1));
moel@132	547	t.Add(new Temperature("System", 2));
moel@132	548	f.Add(new Fan("CPU Fan", 0));
moel@132	549	f.Add(new Fan("Power Fan", 1));
moel@132	550	f.Add(new Fan("Chassis Fan", 2));
moel@132	551	break;
moel@132	552	default:
moel@195	553	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	554	v.Add(new Voltage("CPU VCore", 1));
moel@132	555	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	556	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	557	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	558	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	559	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	560	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	561	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	562	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	563	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	564	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	565	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	566	break;
moel@132	567	}
moel@132	568	break;
moel@132	569	default:
moel@195	570	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	571	v.Add(new Voltage("CPU VCore", 1));
moel@132	572	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	573	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	574	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	575	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	576	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	577	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	578	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	579	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	580	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	581	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	582	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	583	break;
moel@132	584	}
moel@130	585	break;
moel@130	586
moel@220	587	case Chip.W83627EHF:
moel@220	588	switch (manufacturer) {
moel@220	589	case Manufacturer.ASRock:
moel@220	590	switch (model) {
moel@220	591	case Model.AOD790GX_128M: // W83627EHF
moel@220	592	v.Add(new Voltage("CPU VCore", 0));
moel@220	593	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	594	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	595	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	596	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	597	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	598	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	599	t.Add(new Temperature("CPU", 0));
moel@220	600	t.Add(new Temperature("Motherboard", 2));
moel@221	601	f.Add(new Fan("CPU Fan", 0));
moel@221	602	f.Add(new Fan("Chassis Fan", 1));
moel@220	603	break;
moel@220	604	default:
moel@220	605	v.Add(new Voltage("CPU VCore", 0));
moel@220	606	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	607	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	608	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	609	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	610	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	611	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	612	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	613	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	614	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	615	t.Add(new Temperature("CPU", 0));
moel@220	616	t.Add(new Temperature("Auxiliary", 1));
moel@220	617	t.Add(new Temperature("System", 2));
moel@220	618	f.Add(new Fan("System Fan", 0));
moel@220	619	f.Add(new Fan("CPU Fan", 1));
moel@220	620	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	621	f.Add(new Fan("CPU Fan #2", 3));
moel@220	622	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	623	break;
moel@220	624	} break;
moel@220	625	default:
moel@220	626	v.Add(new Voltage("CPU VCore", 0));
moel@220	627	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	628	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	629	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	630	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	631	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	632	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	633	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	634	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	635	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	636	t.Add(new Temperature("CPU", 0));
moel@220	637	t.Add(new Temperature("Auxiliary", 1));
moel@220	638	t.Add(new Temperature("System", 2));
moel@220	639	f.Add(new Fan("System Fan", 0));
moel@220	640	f.Add(new Fan("CPU Fan", 1));
moel@220	641	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	642	f.Add(new Fan("CPU Fan #2", 3));
moel@220	643	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	644	break;
moel@220	645	}
moel@130	646	break;
moel@130	647	case Chip.W83627DHG:
moel@130	648	case Chip.W83627DHGP:
moel@130	649	case Chip.W83667HG:
moel@130	650	case Chip.W83667HGB:
moel@152	651	switch (manufacturer) {
moel@153	652	case Manufacturer.ASRock:
moel@153	653	switch (model) {
moel@168	654	case Model._880GMH_USB3: // W83627DHG-P
moel@153	655	v.Add(new Voltage("CPU VCore", 0));
moel@195	656	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	657	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	658	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	659	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	660	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	661	t.Add(new Temperature("CPU", 0));
moel@153	662	t.Add(new Temperature("Motherboard", 2));
moel@153	663	f.Add(new Fan("Chassis Fan", 0));
moel@153	664	f.Add(new Fan("CPU Fan", 1));
moel@153	665	f.Add(new Fan("Power Fan", 2));
moel@153	666	break;
moel@153	667	default:
moel@153	668	v.Add(new Voltage("CPU VCore", 0));
moel@153	669	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	670	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	671	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	672	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	673	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	674	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	675	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	676	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	677	t.Add(new Temperature("CPU", 0));
moel@153	678	t.Add(new Temperature("Auxiliary", 1));
moel@153	679	t.Add(new Temperature("System", 2));
moel@153	680	f.Add(new Fan("System Fan", 0));
moel@153	681	f.Add(new Fan("CPU Fan", 1));
moel@153	682	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	683	f.Add(new Fan("CPU Fan #2", 3));
moel@153	684	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	685	break;
moel@153	686	}
moel@153	687	break;
moel@152	688	case Manufacturer.ASUS:
moel@152	689	switch (model) {
moel@174	690	case Model.P6X58D_E: // W83667HG
moel@174	691	case Model.Rampage_II_GENE: // W83667HG
moel@152	692	v.Add(new Voltage("CPU VCore", 0));
moel@195	693	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	694	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	695	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	696	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	697	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	698	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	699	t.Add(new Temperature("CPU", 0));
moel@174	700	t.Add(new Temperature("Motherboard", 2));
moel@174	701	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	702	f.Add(new Fan("CPU Fan", 1));
moel@174	703	f.Add(new Fan("Power Fan", 2));
moel@174	704	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	705	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	706	break;
moel@174	707	case Model.Rampage_Extreme: // W83667HG
moel@174	708	v.Add(new Voltage("CPU VCore", 0));
moel@195	709	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	710	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	711	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	712	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	713	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	714	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	715	t.Add(new Temperature("CPU", 0));
moel@152	716	t.Add(new Temperature("Motherboard", 2));
moel@152	717	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	718	f.Add(new Fan("CPU Fan", 1));
moel@153	719	f.Add(new Fan("Power Fan", 2));
moel@152	720	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	721	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	722	break;
moel@152	723	default:
moel@152	724	v.Add(new Voltage("CPU VCore", 0));
moel@152	725	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	726	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	727	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	728	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	729	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	730	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	731	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	732	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	733	t.Add(new Temperature("CPU", 0));
moel@152	734	t.Add(new Temperature("Auxiliary", 1));
moel@152	735	t.Add(new Temperature("System", 2));
moel@153	736	f.Add(new Fan("System Fan", 0));
moel@153	737	f.Add(new Fan("CPU Fan", 1));
moel@153	738	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	739	f.Add(new Fan("CPU Fan #2", 3));
moel@153	740	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	741	break;
moel@152	742	}
moel@152	743	break;
moel@152	744	default:
moel@152	745	v.Add(new Voltage("CPU VCore", 0));
moel@152	746	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	747	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	748	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	749	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	750	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	751	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	752	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	753	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	754	t.Add(new Temperature("CPU", 0));
moel@152	755	t.Add(new Temperature("Auxiliary", 1));
moel@152	756	t.Add(new Temperature("System", 2));
moel@153	757	f.Add(new Fan("System Fan", 0));
moel@153	758	f.Add(new Fan("CPU Fan", 1));
moel@153	759	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	760	f.Add(new Fan("CPU Fan #2", 3));
moel@153	761	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	762	break;
moel@152	763	}
moel@130	764	break;
moel@130	765	case Chip.W83627HF:
moel@130	766	case Chip.W83627THF:
moel@130	767	case Chip.W83687THF:
moel@130	768	v.Add(new Voltage("CPU VCore", 0));
moel@130	769	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	770	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	771	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	772	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	773	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	774	v.Add(new Voltage("VBAT", 6));
moel@130	775	t.Add(new Temperature("CPU", 0));
moel@130	776	t.Add(new Temperature("Auxiliary", 1));
moel@130	777	t.Add(new Temperature("System", 2));
moel@153	778	f.Add(new Fan("System Fan", 0));
moel@153	779	f.Add(new Fan("CPU Fan", 1));
moel@153	780	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	781	break;
moel@245	782	case Chip.NCT6771F:
moel@265	783	case Chip.NCT6776F:
moel@265	784	switch (manufacturer) {
moel@265	785	case Manufacturer.ASUS:
moel@265	786	switch (model) {
moel@265	787	case Model.P8P67_PRO: // NCT6776F
moel@265	788	v.Add(new Voltage("CPU VCore", 0));
moel@265	789	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	790	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	791	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	792	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	793	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	794	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	795	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	796	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	797	t.Add(new Temperature("CPU", 1));
moel@276	798	t.Add(new Temperature("Auxiliary", 2));
moel@276	799	t.Add(new Temperature("System", 3));
moel@265	800	f.Add(new Fan("System Fan", 0));
moel@265	801	f.Add(new Fan("CPU Fan", 1));
moel@265	802	f.Add(new Fan("Auxiliary Fan", 2));
moel@265	803	f.Add(new Fan("Auxiliary Fan #2", 3));
moel@265	804	f.Add(new Fan("Auxiliary Fan #3", 4));
moel@265	805	break;
moel@276	806	case Model.P8P67_M_PRO: // NCT6776F
moel@276	807	v.Add(new Voltage("CPU VCore", 0));
moel@276	808	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	809	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@276	810	v.Add(new Voltage("+3V", 3, 34, 34));
moel@276	811	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	812	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	813	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	814	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	815	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	816	t.Add(new Temperature("CPU", 0));
moel@276	817	t.Add(new Temperature("Motherboard", 3));
moel@276	818	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	819	f.Add(new Fan("CPU Fan", 1));
moel@276	820	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	821	f.Add(new Fan("Power Fan", 3));
moel@276	822	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	823	break;
moel@265	824	default:
moel@265	825	v.Add(new Voltage("CPU VCore", 0));
moel@265	826	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	827	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	828	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	829	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	830	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	831	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	832	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	833	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	834	t.Add(new Temperature("CPU", 0));
moel@276	835	t.Add(new Temperature("CPU", 1));
moel@276	836	t.Add(new Temperature("Auxiliary", 2));
moel@276	837	t.Add(new Temperature("System", 3));
moel@265	838	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	839	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	840	break;
moel@265	841	}
moel@265	842	break;
moel@265	843	default:
moel@265	844	v.Add(new Voltage("CPU VCore", 0));
moel@265	845	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	846	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	847	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	848	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	849	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	850	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	851	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	852	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	853	t.Add(new Temperature("CPU", 0));
moel@276	854	t.Add(new Temperature("CPU", 1));
moel@276	855	t.Add(new Temperature("Auxiliary", 2));
moel@276	856	t.Add(new Temperature("System", 3));
moel@265	857	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	858	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	859	break;
moel@265	860	}
moel@245	861	break;
moel@130	862	default:
moel@130	863	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	864	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	865	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	866	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	867	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	868	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	869	break;
moel@130	870	}
moel@130	871
moel@195	872	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	873	foreach (Voltage voltage in v)
moel@130	874	if (voltage.Index < superIO.Voltages.Length) {
moel@130	875	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	876	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	877	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	878	formula, voltage.Ri),
moel@130	879	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	880	formula, voltage.Rf),
moel@130	881	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	882	formula, voltage.Vf)
moel@165	883	}, settings);
moel@130	884	voltages.Add(sensor);
moel@130	885	}
moel@130	886
moel@130	887	foreach (Temperature temperature in t)
moel@130	888	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	889	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	890	SensorType.Temperature, this, new [] {
moel@130	891	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	892	}, settings);
moel@130	893	temperatures.Add(sensor);
moel@130	894	}
moel@130	895
moel@130	896	foreach (Fan fan in f)
moel@130	897	if (fan.Index < superIO.Fans.Length) {
moel@134	898	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	899	this, settings);
moel@130	900	fans.Add(sensor);
moel@130	901	}
moel@130	902	}
moel@130	903
moel@165	904	public override HardwareType HardwareType {
moel@165	905	get { return HardwareType.SuperIO; }
moel@130	906	}
moel@130	907
moel@176	908	public override IHardware Parent {
moel@176	909	get { return mainboard; }
moel@176	910	}
moel@176	911
moel@130	912
moel@130	913	public override string GetReport() {
moel@130	914	return superIO.GetReport();
moel@130	915	}
moel@130	916
moel@130	917	public override void Update() {
moel@130	918	superIO.Update();
moel@130	919
moel@130	920	foreach (Sensor sensor in voltages) {
moel@228	921	float? value = readVoltage(sensor.Index);
moel@130	922	if (value.HasValue) {
moel@130	923	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	924	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	925	ActivateSensor(sensor);
moel@130	926	}
moel@130	927	}
moel@130	928
moel@130	929	foreach (Sensor sensor in temperatures) {
moel@228	930	float? value = readTemperature(sensor.Index);
moel@130	931	if (value.HasValue) {
moel@130	932	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	933	ActivateSensor(sensor);
moel@130	934	}
moel@130	935	}
moel@130	936
moel@130	937	foreach (Sensor sensor in fans) {
moel@228	938	float? value = readFan(sensor.Index);
moel@130	939	if (value.HasValue) {
moel@130	940	sensor.Value = value;
moel@130	941	if (value.Value > 0)
moel@130	942	ActivateSensor(sensor);
moel@130	943	}
moel@130	944	}
moel@228	945
moel@228	946	postUpdate();
moel@130	947	}
moel@130	948
moel@130	949	private class Voltage {
moel@130	950	public readonly string Name;
moel@130	951	public readonly int Index;
moel@130	952	public readonly float Ri;
moel@130	953	public readonly float Rf;
moel@130	954	public readonly float Vf;
moel@130	955	public readonly bool Hidden;
moel@130	956
moel@202	957	public Voltage(string name, int index) :
moel@202	958	this(name, index, false) { }
moel@202	959
moel@130	960	public Voltage(string name, int index, bool hidden) :
moel@130	961	this(name, index, 0, 1, 0, hidden) { }
moel@202	962
moel@202	963	public Voltage(string name, int index, float ri, float rf) :
moel@202	964	this(name, index, ri, rf, 0, false) { }
moel@202	965
moel@202	966	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	967
moel@195	968	public Voltage(string name, int index,
moel@202	969	float ri, float rf, float vf, bool hidden)
moel@195	970	{
moel@130	971	this.Name = name;
moel@130	972	this.Index = index;
moel@130	973	this.Ri = ri;
moel@130	974	this.Rf = rf;
moel@130	975	this.Vf = vf;
moel@130	976	this.Hidden = hidden;
moel@130	977	}
moel@130	978	}
moel@130	979
moel@130	980	private class Temperature {
moel@130	981	public readonly string Name;
moel@130	982	public readonly int Index;
moel@130	983
moel@167	984	public Temperature(string name, int index) {
moel@130	985	this.Name = name;
moel@130	986	this.Index = index;
moel@130	987	}
moel@130	988	}
moel@130	989
moel@130	990	private class Fan {
moel@130	991	public readonly string Name;
moel@130	992	public readonly int Index;
moel@130	993
moel@130	994	public Fan(string name, int index) {
moel@130	995	this.Name = name;
moel@130	996	this.Index = index;
moel@130	997	}
moel@130	998	}
moel@130	999	}
moel@130	1000	}

author	moel.mich
	Tue, 03 May 2011 18:20:06 +0000
changeset 278	803f98bf1418
parent 277	5c80f37c0330
child 290	22214a7e85a9
permissions	-rw-r--r--