Hardware/Mainboard/SuperIOHardware.cs
author moel.mich
Sun, 27 Jun 2010 20:49:29 +0000
changeset 144 44a688398012
parent 138 1301992d8ae5
child 146 d27bde956836
permissions -rw-r--r--
A fist attempt at adding a mainboard specific configuration for the ASUS M4A79XTD EVO (Issue 79).
moel@135
     1
/*
moel@130
     2
  
moel@130
     3
  Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130
     4
moel@130
     5
  The contents of this file are subject to the Mozilla Public License Version
moel@130
     6
  1.1 (the "License"); you may not use this file except in compliance with
moel@130
     7
  the License. You may obtain a copy of the License at
moel@130
     8
 
moel@130
     9
  http://www.mozilla.org/MPL/
moel@130
    10
moel@130
    11
  Software distributed under the License is distributed on an "AS IS" basis,
moel@130
    12
  WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130
    13
  for the specific language governing rights and limitations under the License.
moel@130
    14
moel@130
    15
  The Original Code is the Open Hardware Monitor code.
moel@130
    16
moel@130
    17
  The Initial Developer of the Original Code is 
moel@130
    18
  Michael Möller <m.moeller@gmx.ch>.
moel@130
    19
  Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130
    20
  the Initial Developer. All Rights Reserved.
moel@130
    21
moel@130
    22
  Contributor(s):
moel@130
    23
moel@130
    24
  Alternatively, the contents of this file may be used under the terms of
moel@130
    25
  either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130
    26
  the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130
    27
  in which case the provisions of the GPL or the LGPL are applicable instead
moel@130
    28
  of those above. If you wish to allow use of your version of this file only
moel@130
    29
  under the terms of either the GPL or the LGPL, and not to allow others to
moel@130
    30
  use your version of this file under the terms of the MPL, indicate your
moel@130
    31
  decision by deleting the provisions above and replace them with the notice
moel@130
    32
  and other provisions required by the GPL or the LGPL. If you do not delete
moel@130
    33
  the provisions above, a recipient may use your version of this file under
moel@130
    34
  the terms of any one of the MPL, the GPL or the LGPL.
moel@130
    35
 
moel@130
    36
*/
moel@130
    37
moel@130
    38
using System;
moel@130
    39
using System.Collections.Generic;
moel@130
    40
using System.Drawing;
moel@130
    41
using OpenHardwareMonitor.Hardware.LPC;
moel@130
    42
moel@130
    43
namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@130
    44
  public class SuperIOHardware : Hardware {
moel@130
    45
moel@130
    46
    private ISuperIO superIO;
moel@130
    47
    private Image icon;
moel@130
    48
    protected readonly string name;
moel@130
    49
moel@130
    50
    private List<Sensor> voltages = new List<Sensor>();
moel@130
    51
    private List<Sensor> temperatures = new List<Sensor>();
moel@130
    52
    private List<Sensor> fans = new List<Sensor>();  
moel@130
    53
moel@130
    54
    public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer, 
moel@130
    55
      Model model) 
moel@130
    56
    {
moel@130
    57
      this.superIO = superIO;
moel@130
    58
      this.icon = Utilities.EmbeddedResources.GetImage("chip.png");
moel@130
    59
moel@130
    60
      switch (superIO.Chip) {
moel@130
    61
        case Chip.F71858: name = "Fintek F71858"; break;
moel@130
    62
        case Chip.F71862: name = "Fintek F71862"; break;
moel@130
    63
        case Chip.F71869: name = "Fintek F71869"; break;
moel@130
    64
        case Chip.F71882: name = "Fintek F71882"; break;
moel@130
    65
        case Chip.F71889ED: name = "Fintek F71889ED"; break;
moel@130
    66
        case Chip.F71889F: name = "Fintek F71889F"; break;
moel@130
    67
        case Chip.IT8712F: this.name = "ITE IT8712F"; break;
moel@130
    68
        case Chip.IT8716F: this.name = "ITE IT8716F"; break;
moel@130
    69
        case Chip.IT8718F: this.name = "ITE IT8718F"; break;
moel@130
    70
        case Chip.IT8720F: this.name = "ITE IT8720F"; break;
moel@130
    71
        case Chip.IT8726F: this.name = "ITE IT8726F"; break;
moel@130
    72
        case Chip.W83627DHG: this.name = "Winbond W83627DHG"; break;
moel@130
    73
        case Chip.W83627DHGP: this.name = "Winbond W83627DHG-P"; break;
moel@130
    74
        case Chip.W83627EHF: this.name = "Winbond W83627EHF"; break;
moel@130
    75
        case Chip.W83627HF: this.name = "Winbond W83627HF"; break;
moel@130
    76
        case Chip.W83627THF: this.name = "Winbond W83627THF"; break;
moel@130
    77
        case Chip.W83667HG: this.name = "Winbond W83667HG"; break;
moel@130
    78
        case Chip.W83667HGB: this.name = "Winbond W83667HG-B"; break;
moel@130
    79
        case Chip.W83687THF: this.name = "Winbond W83687THF"; break;
moel@135
    80
        case Chip.Unknown: this.name = "Unkown"; break;
moel@130
    81
      }
moel@130
    82
moel@130
    83
      List<Voltage> v = new List<Voltage>();
moel@130
    84
      List<Temperature> t = new List<Temperature>();
moel@130
    85
      List<Fan> f = new List<Fan>();
moel@130
    86
moel@130
    87
      switch (superIO.Chip) {
moel@130
    88
        case Chip.IT8712F:
moel@130
    89
        case Chip.IT8716F:
moel@130
    90
        case Chip.IT8718F:
moel@130
    91
        case Chip.IT8720F:
moel@130
    92
        case Chip.IT8726F:
moel@130
    93
          switch (manufacturer) {
moel@133
    94
            case Manufacturer.ASUS:
moel@133
    95
              switch (model) {
moel@133
    96
                case Model.Crosshair_III_Formula:
moel@133
    97
                  v.Add(new Voltage("VBat", 8));
moel@133
    98
                  t.Add(new Temperature("CPU", 0));
moel@133
    99
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@133
   100
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@133
   101
                  break;
moel@144
   102
                case Model.M2N_SLI_DELUXE:                
moel@133
   103
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   104
                  v.Add(new Voltage("+3.3V", 1));
moel@133
   105
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133
   106
                  v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@133
   107
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@133
   108
                  v.Add(new Voltage("VBat", 8));
moel@133
   109
                  t.Add(new Temperature("CPU", 0));
moel@133
   110
                  t.Add(new Temperature("Motherboard", 1));
moel@133
   111
                  f.Add(new Fan("CPU Fan", 0));
moel@133
   112
                  f.Add(new Fan("Chassis Fan #1", 1));
moel@133
   113
                  f.Add(new Fan("Power Fan", 2));
moel@133
   114
                  break;
moel@144
   115
                case Model.M4A79XTD_EVO:
moel@144
   116
                  v.Add(new Voltage("+3.3V", 1, 18, 16, 0));
moel@144
   117
                  v.Add(new Voltage("CPU VCore", 2, 12, 15, 0));                  
moel@144
   118
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@144
   119
                  v.Add(new Voltage("+12V", 4, 5.6f, 2.7f, 0));
moel@144
   120
                  v.Add(new Voltage("VBat", 8));
moel@144
   121
                  t.Add(new Temperature("CPU", 0));
moel@144
   122
                  t.Add(new Temperature("Motherboard", 1));
moel@144
   123
                  f.Add(new Fan("CPU Fan", 0));
moel@144
   124
                  f.Add(new Fan("Chassis Fan #1", 1));
moel@144
   125
                  f.Add(new Fan("Chassis Fan #2", 2));
moel@144
   126
                  break;
moel@133
   127
                default:
moel@133
   128
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   129
                  v.Add(new Voltage("Voltage #2", 1, true));
moel@133
   130
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@133
   131
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@133
   132
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@133
   133
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@133
   134
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@133
   135
                  v.Add(new Voltage("Voltage #8", 7, true));
moel@133
   136
                  v.Add(new Voltage("VBat", 8));
moel@133
   137
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133
   138
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133
   139
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@133
   140
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@133
   141
                  break;
moel@133
   142
              }
moel@133
   143
              break;
moel@130
   144
            case Manufacturer.DFI:
moel@130
   145
              switch (model) {
moel@130
   146
                case Model.LP_BI_P45_T2RS_Elite:
moel@130
   147
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   148
                  v.Add(new Voltage("FSB VTT", 1));
moel@130
   149
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   150
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   151
                  v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130
   152
                  v.Add(new Voltage("NB Core", 5));
moel@130
   153
                  v.Add(new Voltage("VDIMM", 6));
moel@130
   154
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130
   155
                  v.Add(new Voltage("VBat", 8));
moel@130
   156
                  t.Add(new Temperature("CPU", 0));
moel@130
   157
                  t.Add(new Temperature("System", 1));
moel@130
   158
                  t.Add(new Temperature("Chipset", 2));
moel@130
   159
                  f.Add(new Fan("Fan #1", 0));
moel@130
   160
                  f.Add(new Fan("Fan #2", 1));
moel@130
   161
                  f.Add(new Fan("Fan #3", 2));
moel@130
   162
                  break;
moel@130
   163
                case Model.LP_DK_P55_T3eH9:
moel@130
   164
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   165
                  v.Add(new Voltage("VTT", 1));
moel@130
   166
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   167
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   168
                  v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130
   169
                  v.Add(new Voltage("CPU PLL", 5));
moel@130
   170
                  v.Add(new Voltage("DRAM", 6));
moel@130
   171
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130
   172
                  v.Add(new Voltage("VBat", 8));
moel@130
   173
                  t.Add(new Temperature("Chipset", 0));
moel@130
   174
                  t.Add(new Temperature("CPU PWM", 1));
moel@130
   175
                  t.Add(new Temperature("CPU", 2));
moel@130
   176
                  f.Add(new Fan("Fan #1", 0));
moel@130
   177
                  f.Add(new Fan("Fan #2", 1));
moel@130
   178
                  f.Add(new Fan("Fan #3", 2));
moel@130
   179
                  break;
moel@130
   180
                default:
moel@130
   181
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   182
                  v.Add(new Voltage("VTT", 1, true));
moel@130
   183
                  v.Add(new Voltage("+3.3V", 2, true));
moel@130
   184
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130
   185
                  v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130
   186
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   187
                  v.Add(new Voltage("DRAM", 6, true));
moel@130
   188
                  v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130
   189
                  v.Add(new Voltage("VBat", 8));
moel@130
   190
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   191
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   192
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   193
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   194
                  break;
moel@130
   195
              }
moel@130
   196
              break;
moel@130
   197
moel@130
   198
            case Manufacturer.Gigabyte:
moel@130
   199
              switch (model) {
moel@130
   200
                case Model._965P_S3:
moel@130
   201
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   202
                  v.Add(new Voltage("DRAM", 1));
moel@130
   203
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   204
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   205
                  v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130
   206
                  v.Add(new Voltage("VBat", 8));
moel@130
   207
                  t.Add(new Temperature("System", 0));
moel@130
   208
                  t.Add(new Temperature("CPU", 1));
moel@130
   209
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   210
                  f.Add(new Fan("System Fan", 1));
moel@130
   211
                  break;
moel@130
   212
                case Model.EP45_DS3R:
moel@130
   213
                case Model.EP45_UD3R: 
moel@138
   214
                case Model.X38_DS5:    
moel@130
   215
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   216
                  v.Add(new Voltage("DRAM", 1));
moel@130
   217
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   218
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   219
                  v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130
   220
                  v.Add(new Voltage("VBat", 8));
moel@130
   221
                  t.Add(new Temperature("System", 0));
moel@130
   222
                  t.Add(new Temperature("CPU", 1));
moel@130
   223
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   224
                  f.Add(new Fan("System Fan #2", 1));
moel@130
   225
                  f.Add(new Fan("Power Fan", 2));
moel@130
   226
                  f.Add(new Fan("System Fan #1", 3));
moel@130
   227
                  break;
moel@133
   228
                case Model.EX58_EXTREME:
moel@133
   229
                  v.Add(new Voltage("CPU VCore", 0));
moel@133
   230
                  v.Add(new Voltage("DRAM", 1));
moel@133
   231
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133
   232
                  v.Add(new Voltage("VBat", 8));
moel@133
   233
                  t.Add(new Temperature("System", 0));
moel@133
   234
                  t.Add(new Temperature("CPU", 1));
moel@138
   235
                  t.Add(new Temperature("Northbridge", 2));
moel@133
   236
                  f.Add(new Fan("CPU Fan", 0));
moel@133
   237
                  f.Add(new Fan("System Fan #2", 1));
moel@133
   238
                  f.Add(new Fan("Power Fan", 2));
moel@133
   239
                  f.Add(new Fan("System Fan #1", 3));
moel@133
   240
                  break;
moel@130
   241
                case Model.P35_DS3:
moel@133
   242
                case Model.P35_DS3L:
moel@130
   243
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   244
                  v.Add(new Voltage("DRAM", 1));
moel@130
   245
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   246
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   247
                  v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130
   248
                  v.Add(new Voltage("VBat", 8));
moel@130
   249
                  t.Add(new Temperature("System", 0));
moel@130
   250
                  t.Add(new Temperature("CPU", 1));
moel@130
   251
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   252
                  f.Add(new Fan("System Fan #1", 1));
moel@130
   253
                  f.Add(new Fan("System Fan #2", 2));
moel@130
   254
                  f.Add(new Fan("Power Fan", 3));
moel@130
   255
                  break;
moel@130
   256
                case Model.GA_MA785GMT_UD2H:
moel@130
   257
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   258
                  v.Add(new Voltage("DRAM", 1));
moel@130
   259
                  v.Add(new Voltage("+3.3V", 2));
moel@130
   260
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130
   261
                  v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@130
   262
                  v.Add(new Voltage("VBat", 8));
moel@130
   263
                  t.Add(new Temperature("System", 0));
moel@130
   264
                  t.Add(new Temperature("CPU", 1));
moel@130
   265
                  f.Add(new Fan("CPU Fan", 0));
moel@130
   266
                  f.Add(new Fan("System Fan", 1));
moel@130
   267
                  f.Add(new Fan("NB Fan", 2));
moel@130
   268
                  break;
moel@138
   269
                case Model.X58A_UD3R:
moel@138
   270
                  v.Add(new Voltage("CPU VCore", 0));
moel@138
   271
                  v.Add(new Voltage("DRAM", 1));
moel@138
   272
                  v.Add(new Voltage("+3.3V", 2));
moel@138
   273
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@138
   274
                  v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@138
   275
                  v.Add(new Voltage("VBat", 8));
moel@138
   276
                  t.Add(new Temperature("System", 0));
moel@138
   277
                  t.Add(new Temperature("CPU", 1));
moel@138
   278
                  t.Add(new Temperature("Northbridge", 2));
moel@138
   279
                  f.Add(new Fan("CPU Fan", 0));
moel@138
   280
                  f.Add(new Fan("System Fan #2", 1));
moel@138
   281
                  f.Add(new Fan("Power Fan", 2));
moel@138
   282
                  f.Add(new Fan("System Fan #1", 3));
moel@138
   283
                  break;
moel@130
   284
                default:
moel@130
   285
                  v.Add(new Voltage("CPU VCore", 0));
moel@130
   286
                  v.Add(new Voltage("DRAM", 1, true));
moel@130
   287
                  v.Add(new Voltage("+3.3V", 2, true));
moel@130
   288
                  v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130
   289
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   290
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   291
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@130
   292
                  v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130
   293
                  v.Add(new Voltage("VBat", 8));
moel@130
   294
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   295
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   296
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   297
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   298
                  break;
moel@130
   299
              }
moel@130
   300
              break;
moel@130
   301
moel@130
   302
            default:
moel@130
   303
              v.Add(new Voltage("CPU VCore", 0));
moel@130
   304
              v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   305
              v.Add(new Voltage("Voltage #3", 2, true));
moel@130
   306
              v.Add(new Voltage("Voltage #4", 3, true));
moel@130
   307
              v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   308
              v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   309
              v.Add(new Voltage("Voltage #7", 6, true));
moel@130
   310
              v.Add(new Voltage("Voltage #8", 7, true));
moel@130
   311
              v.Add(new Voltage("VBat", 8));
moel@130
   312
              for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   313
                t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   314
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   315
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   316
              break;
moel@130
   317
          }
moel@130
   318
          break;
moel@130
   319
          
moel@130
   320
        case Chip.F71858:
moel@132
   321
          v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132
   322
          v.Add(new Voltage("VSB3V", 1, 150, 150, 0));
moel@132
   323
          v.Add(new Voltage("Battery", 2, 150, 150, 0));
moel@130
   324
          for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   325
            t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   326
          for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   327
            f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   328
          break;
moel@130
   329
        case Chip.F71862: 
moel@130
   330
        case Chip.F71869: 
moel@130
   331
        case Chip.F71882:
moel@130
   332
        case Chip.F71889ED: 
moel@130
   333
        case Chip.F71889F:
moel@132
   334
          switch (manufacturer) {
moel@132
   335
            case Manufacturer.EVGA:
moel@132
   336
              switch (model) {
moel@132
   337
                case Model.X58_SLI_Classified:
moel@132
   338
                  v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132
   339
                  v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));
moel@132
   340
                  v.Add(new Voltage("DIMM", 2, 47, 100, 0));
moel@132
   341
                  v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));
moel@132
   342
                  v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));
moel@132
   343
                  v.Add(new Voltage("+5V", 5, 51, 12, 0));
moel@132
   344
                  v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));
moel@132
   345
                  v.Add(new Voltage("3VSB", 7, 150, 150, 0));
moel@132
   346
                  v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132
   347
                  t.Add(new Temperature("CPU", 0));
moel@132
   348
                  t.Add(new Temperature("VREG", 1));
moel@132
   349
                  t.Add(new Temperature("System", 2));
moel@132
   350
                  f.Add(new Fan("CPU Fan", 0));
moel@132
   351
                  f.Add(new Fan("Power Fan", 1));
moel@132
   352
                  f.Add(new Fan("Chassis Fan", 2));
moel@132
   353
                  break;
moel@132
   354
                default:
moel@132
   355
                  v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132
   356
                  v.Add(new Voltage("CPU VCore", 1));
moel@132
   357
                  v.Add(new Voltage("Voltage #3", 2, true));
moel@132
   358
                  v.Add(new Voltage("Voltage #4", 3, true));
moel@132
   359
                  v.Add(new Voltage("Voltage #5", 4, true));
moel@132
   360
                  v.Add(new Voltage("Voltage #6", 5, true));
moel@132
   361
                  v.Add(new Voltage("Voltage #7", 6, true));
moel@132
   362
                  v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132
   363
                  v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132
   364
                  for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132
   365
                    t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132
   366
                  for (int i = 0; i < superIO.Fans.Length; i++)
moel@132
   367
                    f.Add(new Fan("Fan #" + (i + 1), i));
moel@132
   368
                  break;
moel@132
   369
              }
moel@132
   370
              break;
moel@132
   371
            default:
moel@132
   372
              v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132
   373
              v.Add(new Voltage("CPU VCore", 1));
moel@132
   374
              v.Add(new Voltage("Voltage #3", 2, true));
moel@132
   375
              v.Add(new Voltage("Voltage #4", 3, true));
moel@132
   376
              v.Add(new Voltage("Voltage #5", 4, true));
moel@132
   377
              v.Add(new Voltage("Voltage #6", 5, true));
moel@132
   378
              v.Add(new Voltage("Voltage #7", 6, true));
moel@132
   379
              v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132
   380
              v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132
   381
              for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132
   382
                t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132
   383
              for (int i = 0; i < superIO.Fans.Length; i++)
moel@132
   384
                f.Add(new Fan("Fan #" + (i + 1), i));
moel@132
   385
              break;
moel@132
   386
          }
moel@130
   387
          break;
moel@130
   388
moel@130
   389
        case Chip.W83627EHF:          
moel@130
   390
          v.Add(new Voltage("CPU VCore", 0));
moel@130
   391
          v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   392
          v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@130
   393
          v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@130
   394
          v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   395
          v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   396
          v.Add(new Voltage("Voltage #7", 6, true));
moel@130
   397
          v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@130
   398
          v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@130
   399
          v.Add(new Voltage("Voltage #10", 9, true));
moel@130
   400
          t.Add(new Temperature("CPU", 0));
moel@130
   401
          t.Add(new Temperature("Auxiliary", 1));
moel@130
   402
          t.Add(new Temperature("System", 2));
moel@130
   403
          f.Add(new Fan("System", 0));
moel@130
   404
          f.Add(new Fan("CPU", 1));
moel@130
   405
          f.Add(new Fan("Auxiliary", 2));
moel@130
   406
          f.Add(new Fan("CPU #2", 3));
moel@130
   407
          f.Add(new Fan("Auxiliary #2", 4));
moel@130
   408
          break;
moel@130
   409
        case Chip.W83627DHG: 
moel@130
   410
        case Chip.W83627DHGP:                      
moel@130
   411
        case Chip.W83667HG:
moel@130
   412
        case Chip.W83667HGB:
moel@130
   413
          v.Add(new Voltage("CPU VCore", 0));
moel@130
   414
          v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   415
          v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@130
   416
          v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@130
   417
          v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   418
          v.Add(new Voltage("Voltage #6", 5, true));
moel@130
   419
          v.Add(new Voltage("Voltage #7", 6, true));
moel@130
   420
          v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@130
   421
          v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@130
   422
          t.Add(new Temperature("CPU", 0));
moel@130
   423
          t.Add(new Temperature("Auxiliary", 1));
moel@130
   424
          t.Add(new Temperature("System", 2));
moel@130
   425
          f.Add(new Fan("System", 0));
moel@130
   426
          f.Add(new Fan("CPU", 1));
moel@130
   427
          f.Add(new Fan("Auxiliary", 2));
moel@130
   428
          f.Add(new Fan("CPU #2", 3));
moel@130
   429
          f.Add(new Fan("Auxiliary #2", 4));            
moel@130
   430
          break;
moel@130
   431
        case Chip.W83627HF: 
moel@130
   432
        case Chip.W83627THF: 
moel@130
   433
        case Chip.W83687THF:
moel@130
   434
          v.Add(new Voltage("CPU VCore", 0));
moel@130
   435
          v.Add(new Voltage("Voltage #2", 1, true));
moel@130
   436
          v.Add(new Voltage("Voltage #3", 2, true));
moel@130
   437
          v.Add(new Voltage("AVCC", 3, 34, 51, 0));
moel@130
   438
          v.Add(new Voltage("Voltage #5", 4, true));
moel@130
   439
          v.Add(new Voltage("5VSB", 5, 34, 51, 0));
moel@130
   440
          v.Add(new Voltage("VBAT", 6));
moel@130
   441
          t.Add(new Temperature("CPU", 0));
moel@130
   442
          t.Add(new Temperature("Auxiliary", 1));
moel@130
   443
          t.Add(new Temperature("System", 2));
moel@130
   444
          f.Add(new Fan("System", 0));
moel@130
   445
          f.Add(new Fan("CPU", 1));
moel@130
   446
          f.Add(new Fan("Auxiliary", 2));
moel@130
   447
          break;
moel@130
   448
        default:
moel@130
   449
          for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130
   450
            v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130
   451
          for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130
   452
            t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130
   453
          for (int i = 0; i < superIO.Fans.Length; i++)
moel@130
   454
            f.Add(new Fan("Fan #" + (i + 1), i));
moel@130
   455
          break;
moel@130
   456
      }
moel@130
   457
moel@130
   458
      string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130
   459
      foreach (Voltage voltage in v) 
moel@130
   460
        if (voltage.Index < superIO.Voltages.Length) {
moel@130
   461
          Sensor sensor = new Sensor(voltage.Name, voltage.Index, 
moel@134
   462
            voltage.Hidden, SensorType.Voltage, this, 
moel@130
   463
            new ParameterDescription[] {
moel@130
   464
            new ParameterDescription("Ri [kΩ]", "Input resistance.\n" + 
moel@130
   465
              formula, voltage.Ri),
moel@130
   466
            new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" + 
moel@130
   467
              formula, voltage.Rf),
moel@130
   468
            new ParameterDescription("Vf [V]", "Reference voltage.\n" + 
moel@130
   469
              formula, voltage.Vf)
moel@130
   470
            });
moel@130
   471
          voltages.Add(sensor);
moel@130
   472
      }
moel@130
   473
moel@130
   474
      foreach (Temperature temperature in t) 
moel@130
   475
        if (temperature.Index < superIO.Temperatures.Length) {
moel@134
   476
        Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@130
   477
          SensorType.Temperature, this, new ParameterDescription[] {
moel@130
   478
          new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@130
   479
        });
moel@130
   480
        temperatures.Add(sensor);
moel@130
   481
      }
moel@130
   482
moel@130
   483
      foreach (Fan fan in f)
moel@130
   484
        if (fan.Index < superIO.Fans.Length) {
moel@134
   485
          Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@130
   486
            this, null);
moel@130
   487
          fans.Add(sensor);
moel@130
   488
        }
moel@130
   489
    }
moel@130
   490
moel@130
   491
    public override Identifier Identifier {
moel@130
   492
      get { return new Identifier("lpc", superIO.Chip.ToString().ToLower()); }
moel@130
   493
    }
moel@130
   494
moel@130
   495
    public override Image Icon {
moel@130
   496
      get { return icon; }
moel@130
   497
    }
moel@130
   498
moel@130
   499
    public override string Name {
moel@130
   500
      get { return name; }
moel@130
   501
    }
moel@130
   502
moel@130
   503
    public override string GetReport() {
moel@130
   504
      return superIO.GetReport();
moel@130
   505
    }
moel@130
   506
moel@130
   507
    public override void Update() {
moel@130
   508
      superIO.Update();
moel@130
   509
moel@130
   510
      foreach (Sensor sensor in voltages) {
moel@130
   511
        float? value = superIO.Voltages[sensor.Index];
moel@130
   512
        if (value.HasValue) {
moel@130
   513
          sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130
   514
            sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130
   515
          ActivateSensor(sensor);
moel@130
   516
        }
moel@130
   517
      }
moel@130
   518
moel@130
   519
      foreach (Sensor sensor in temperatures) {
moel@130
   520
        float? value = superIO.Temperatures[sensor.Index];
moel@130
   521
        if (value.HasValue) {
moel@130
   522
          sensor.Value = value + sensor.Parameters[0].Value;
moel@130
   523
          ActivateSensor(sensor);
moel@130
   524
        }
moel@130
   525
      }
moel@130
   526
moel@130
   527
      foreach (Sensor sensor in fans) {
moel@130
   528
        float? value = superIO.Fans[sensor.Index];
moel@130
   529
        if (value.HasValue) {
moel@130
   530
          sensor.Value = value;
moel@130
   531
          if (value.Value > 0)
moel@130
   532
            ActivateSensor(sensor);
moel@130
   533
        }
moel@130
   534
      }
moel@130
   535
    }
moel@130
   536
moel@130
   537
    private class Voltage {
moel@130
   538
      public readonly string Name;
moel@130
   539
      public readonly int Index;
moel@130
   540
      public readonly float Ri;
moel@130
   541
      public readonly float Rf;
moel@130
   542
      public readonly float Vf;
moel@130
   543
      public readonly bool Hidden;
moel@130
   544
moel@130
   545
      public Voltage(string name, int index) :
moel@130
   546
        this(name, index, 0, 1, 0, false) { }
moel@130
   547
moel@130
   548
      public Voltage(string name, int index, bool hidden) :
moel@130
   549
        this(name, index, 0, 1, 0, hidden) { }
moel@130
   550
moel@130
   551
      public Voltage(string name, int index, float ri, float rf, float vf) :
moel@130
   552
        this(name, index, ri, rf, vf, false) { }
moel@130
   553
moel@130
   554
      public Voltage(string name, int index, float ri, float rf, float vf,
moel@130
   555
        bool hidden) {
moel@130
   556
        this.Name = name;
moel@130
   557
        this.Index = index;
moel@130
   558
        this.Ri = ri;
moel@130
   559
        this.Rf = rf;
moel@130
   560
        this.Vf = vf;
moel@130
   561
        this.Hidden = hidden;
moel@130
   562
      }
moel@130
   563
    }
moel@130
   564
moel@130
   565
    private class Temperature {
moel@130
   566
      public readonly string Name;
moel@130
   567
      public readonly int Index;
moel@130
   568
moel@130
   569
      public Temperature(string name, int index) {
moel@130
   570
        this.Name = name;
moel@130
   571
        this.Index = index;
moel@130
   572
      }
moel@130
   573
    }
moel@130
   574
moel@130
   575
    private class Fan {
moel@130
   576
      public readonly string Name;
moel@130
   577
      public readonly int Index;
moel@130
   578
moel@130
   579
      public Fan(string name, int index) {
moel@130
   580
        this.Name = name;
moel@130
   581
        this.Index = index;
moel@130
   582
      }
moel@130
   583
    }
moel@130
   584
  }
moel@130
   585
}