OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@a950ba30d4dd (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@130	19	Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@130	38	using System.Collections.Generic;
moel@166	39	using System.Globalization;
moel@130	40	using OpenHardwareMonitor.Hardware.LPC;
moel@130	41
moel@130	42	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	43	internal class SuperIOHardware : Hardware {
moel@130	44
moel@195	45	private readonly Mainboard mainboard;
moel@195	46	private readonly ISuperIO superIO;
moel@195	47	private readonly string name;
moel@130	48
moel@195	49	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	50	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	51	private readonly List<Sensor> fans = new List<Sensor>();
moel@167	52
moel@176	53	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	54	Manufacturer manufacturer, Model model, ISettings settings)
moel@130	55	{
moel@176	56	this.mainboard = mainboard;
moel@130	57	this.superIO = superIO;
moel@167	58	this.name = ChipName.GetName(superIO.Chip);
moel@130	59
moel@130	60	List<Voltage> v = new List<Voltage>();
moel@130	61	List<Temperature> t = new List<Temperature>();
moel@130	62	List<Fan> f = new List<Fan>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@130	65	case Chip.IT8712F:
moel@130	66	case Chip.IT8716F:
moel@130	67	case Chip.IT8718F:
moel@177	68	case Chip.IT8720F:
moel@130	69	case Chip.IT8726F:
moel@130	70	switch (manufacturer) {
moel@133	71	case Manufacturer.ASUS:
moel@133	72	switch (model) {
moel@168	73	case Model.Crosshair_III_Formula: // IT8720F
moel@133	74	v.Add(new Voltage("VBat", 8));
moel@133	75	t.Add(new Temperature("CPU", 0));
moel@133	76	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	77	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	78	break;
moel@144	79	case Model.M2N_SLI_DELUXE:
moel@133	80	v.Add(new Voltage("CPU VCore", 0));
moel@133	81	v.Add(new Voltage("+3.3V", 1));
moel@195	82	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	83	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	84	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	85	v.Add(new Voltage("VBat", 8));
moel@133	86	t.Add(new Temperature("CPU", 0));
moel@133	87	t.Add(new Temperature("Motherboard", 1));
moel@133	88	f.Add(new Fan("CPU Fan", 0));
moel@133	89	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	90	f.Add(new Fan("Power Fan", 2));
moel@133	91	break;
moel@168	92	case Model.M4A79XTD_EVO: // IT8720F
moel@195	93	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	94	v.Add(new Voltage("VBat", 8));
moel@144	95	t.Add(new Temperature("CPU", 0));
moel@144	96	t.Add(new Temperature("Motherboard", 1));
moel@144	97	f.Add(new Fan("CPU Fan", 0));
moel@144	98	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	99	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	100	break;
moel@133	101	default:
moel@133	102	v.Add(new Voltage("CPU VCore", 0));
moel@133	103	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	104	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	105	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	106	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	107	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	108	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	109	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	110	v.Add(new Voltage("VBat", 8));
moel@133	111	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	112	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	113	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	114	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	115	break;
moel@133	116	}
moel@133	117	break;
moel@221	118
moel@221	119	case Manufacturer.ASRock:
moel@221	120	switch (model) {
moel@221	121	case Model.P55_Deluxe: // IT8720F
moel@221	122	v.Add(new Voltage("CPU VCore", 0));
moel@221	123	v.Add(new Voltage("+3.3V", 2));
moel@221	124	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	125	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	126	v.Add(new Voltage("VBat", 8));
moel@221	127	t.Add(new Temperature("CPU", 0));
moel@221	128	t.Add(new Temperature("Motherboard", 1));
moel@221	129	f.Add(new Fan("CPU Fan", 0));
moel@221	130	f.Add(new Fan("Chassis Fan #1", 1));
moel@221	131	// fan channel 2 can connect to 3 different fan headers
moel@221	132	// which fan is read is configured with gpio 83-85
moel@221	133	break;
moel@221	134	default:
moel@221	135	v.Add(new Voltage("CPU VCore", 0));
moel@221	136	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	137	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	138	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	139	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	140	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	141	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	142	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	143	v.Add(new Voltage("VBat", 8));
moel@221	144	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	145	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	146	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	147	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	148	break;
moel@221	149	};
moel@221	150	break;
moel@221	151
moel@130	152	case Manufacturer.DFI:
moel@130	153	switch (model) {
moel@168	154	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	155	v.Add(new Voltage("CPU VCore", 0));
moel@130	156	v.Add(new Voltage("FSB VTT", 1));
moel@130	157	v.Add(new Voltage("+3.3V", 2));
moel@195	158	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	159	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	160	v.Add(new Voltage("NB Core", 5));
moel@130	161	v.Add(new Voltage("VDIMM", 6));
moel@195	162	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	163	v.Add(new Voltage("VBat", 8));
moel@130	164	t.Add(new Temperature("CPU", 0));
moel@130	165	t.Add(new Temperature("System", 1));
moel@130	166	t.Add(new Temperature("Chipset", 2));
moel@130	167	f.Add(new Fan("Fan #1", 0));
moel@130	168	f.Add(new Fan("Fan #2", 1));
moel@130	169	f.Add(new Fan("Fan #3", 2));
moel@130	170	break;
moel@168	171	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	172	v.Add(new Voltage("CPU VCore", 0));
moel@130	173	v.Add(new Voltage("VTT", 1));
moel@130	174	v.Add(new Voltage("+3.3V", 2));
moel@195	175	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	176	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	177	v.Add(new Voltage("CPU PLL", 5));
moel@130	178	v.Add(new Voltage("DRAM", 6));
moel@195	179	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	180	v.Add(new Voltage("VBat", 8));
moel@130	181	t.Add(new Temperature("Chipset", 0));
moel@130	182	t.Add(new Temperature("CPU PWM", 1));
moel@130	183	t.Add(new Temperature("CPU", 2));
moel@130	184	f.Add(new Fan("Fan #1", 0));
moel@130	185	f.Add(new Fan("Fan #2", 1));
moel@130	186	f.Add(new Fan("Fan #3", 2));
moel@130	187	break;
moel@130	188	default:
moel@130	189	v.Add(new Voltage("CPU VCore", 0));
moel@130	190	v.Add(new Voltage("VTT", 1, true));
moel@130	191	v.Add(new Voltage("+3.3V", 2, true));
moel@130	192	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	193	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	194	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	195	v.Add(new Voltage("DRAM", 6, true));
moel@130	196	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	197	v.Add(new Voltage("VBat", 8));
moel@130	198	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	199	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	200	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	201	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	202	break;
moel@130	203	}
moel@130	204	break;
moel@130	205
moel@130	206	case Manufacturer.Gigabyte:
moel@130	207	switch (model) {
moel@168	208	case Model._965P_S3: // IT8718F
moel@130	209	v.Add(new Voltage("CPU VCore", 0));
moel@130	210	v.Add(new Voltage("DRAM", 1));
moel@130	211	v.Add(new Voltage("+3.3V", 2));
moel@195	212	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	213	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	214	v.Add(new Voltage("VBat", 8));
moel@130	215	t.Add(new Temperature("System", 0));
moel@130	216	t.Add(new Temperature("CPU", 1));
moel@130	217	f.Add(new Fan("CPU Fan", 0));
moel@130	218	f.Add(new Fan("System Fan", 1));
moel@130	219	break;
moel@168	220	case Model.EP45_DS3R: // IT8718F
moel@130	221	case Model.EP45_UD3R:
moel@138	222	case Model.X38_DS5:
moel@130	223	v.Add(new Voltage("CPU VCore", 0));
moel@130	224	v.Add(new Voltage("DRAM", 1));
moel@130	225	v.Add(new Voltage("+3.3V", 2));
moel@195	226	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	227	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	228	v.Add(new Voltage("VBat", 8));
moel@130	229	t.Add(new Temperature("System", 0));
moel@130	230	t.Add(new Temperature("CPU", 1));
moel@130	231	f.Add(new Fan("CPU Fan", 0));
moel@130	232	f.Add(new Fan("System Fan #2", 1));
moel@130	233	f.Add(new Fan("Power Fan", 2));
moel@130	234	f.Add(new Fan("System Fan #1", 3));
moel@130	235	break;
moel@168	236	case Model.EX58_EXTREME: // IT8720F
moel@133	237	v.Add(new Voltage("CPU VCore", 0));
moel@133	238	v.Add(new Voltage("DRAM", 1));
moel@195	239	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	240	v.Add(new Voltage("VBat", 8));
moel@133	241	t.Add(new Temperature("System", 0));
moel@133	242	t.Add(new Temperature("CPU", 1));
moel@138	243	t.Add(new Temperature("Northbridge", 2));
moel@133	244	f.Add(new Fan("CPU Fan", 0));
moel@133	245	f.Add(new Fan("System Fan #2", 1));
moel@133	246	f.Add(new Fan("Power Fan", 2));
moel@133	247	f.Add(new Fan("System Fan #1", 3));
moel@133	248	break;
moel@168	249	case Model.P35_DS3: // IT8718F
moel@168	250	case Model.P35_DS3L: // IT8718F
moel@130	251	v.Add(new Voltage("CPU VCore", 0));
moel@130	252	v.Add(new Voltage("DRAM", 1));
moel@130	253	v.Add(new Voltage("+3.3V", 2));
moel@195	254	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	255	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	256	v.Add(new Voltage("VBat", 8));
moel@130	257	t.Add(new Temperature("System", 0));
moel@130	258	t.Add(new Temperature("CPU", 1));
moel@130	259	f.Add(new Fan("CPU Fan", 0));
moel@130	260	f.Add(new Fan("System Fan #1", 1));
moel@130	261	f.Add(new Fan("System Fan #2", 2));
moel@130	262	f.Add(new Fan("Power Fan", 3));
moel@130	263	break;
moel@168	264	case Model.P55_UD4: // IT8720F
moel@168	265	case Model.P55M_UD4: // IT8720F
moel@148	266	v.Add(new Voltage("CPU VCore", 0));
moel@148	267	v.Add(new Voltage("DRAM", 1));
moel@148	268	v.Add(new Voltage("+3.3V", 2));
moel@195	269	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	270	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	271	v.Add(new Voltage("VBat", 8));
moel@148	272	t.Add(new Temperature("System", 0));
moel@148	273	t.Add(new Temperature("CPU", 2));
moel@148	274	f.Add(new Fan("CPU Fan", 0));
moel@148	275	f.Add(new Fan("System Fan #2", 1));
moel@148	276	f.Add(new Fan("Power Fan", 2));
moel@148	277	f.Add(new Fan("System Fan #1", 3));
moel@148	278	break;
moel@168	279	case Model.GA_MA770T_UD3: // IT8720F
moel@154	280	v.Add(new Voltage("CPU VCore", 0));
moel@154	281	v.Add(new Voltage("DRAM", 1));
moel@154	282	v.Add(new Voltage("+3.3V", 2));
moel@195	283	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	284	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	285	v.Add(new Voltage("VBat", 8));
moel@154	286	t.Add(new Temperature("System", 0));
moel@154	287	t.Add(new Temperature("CPU", 1));
moel@154	288	f.Add(new Fan("CPU Fan", 0));
moel@154	289	f.Add(new Fan("System Fan #1", 1));
moel@154	290	f.Add(new Fan("System Fan #2", 2));
moel@154	291	f.Add(new Fan("Power Fan", 3));
moel@154	292	break;
moel@168	293	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	294	v.Add(new Voltage("CPU VCore", 0));
moel@130	295	v.Add(new Voltage("DRAM", 1));
moel@130	296	v.Add(new Voltage("+3.3V", 2));
moel@195	297	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	298	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	299	v.Add(new Voltage("VBat", 8));
moel@130	300	t.Add(new Temperature("System", 0));
moel@130	301	t.Add(new Temperature("CPU", 1));
moel@130	302	f.Add(new Fan("CPU Fan", 0));
moel@130	303	f.Add(new Fan("System Fan", 1));
moel@130	304	f.Add(new Fan("NB Fan", 2));
moel@130	305	break;
moel@168	306	case Model.X58A_UD3R: // IT8720F
moel@138	307	v.Add(new Voltage("CPU VCore", 0));
moel@138	308	v.Add(new Voltage("DRAM", 1));
moel@138	309	v.Add(new Voltage("+3.3V", 2));
moel@195	310	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	311	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	312	v.Add(new Voltage("VBat", 8));
moel@138	313	t.Add(new Temperature("System", 0));
moel@138	314	t.Add(new Temperature("CPU", 1));
moel@138	315	t.Add(new Temperature("Northbridge", 2));
moel@138	316	f.Add(new Fan("CPU Fan", 0));
moel@138	317	f.Add(new Fan("System Fan #2", 1));
moel@138	318	f.Add(new Fan("Power Fan", 2));
moel@138	319	f.Add(new Fan("System Fan #1", 3));
moel@138	320	break;
moel@130	321	default:
moel@130	322	v.Add(new Voltage("CPU VCore", 0));
moel@130	323	v.Add(new Voltage("DRAM", 1, true));
moel@130	324	v.Add(new Voltage("+3.3V", 2, true));
moel@130	325	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	326	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	327	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	328	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	329	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130	330	v.Add(new Voltage("VBat", 8));
moel@130	331	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	332	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	333	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	334	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	335	break;
moel@130	336	}
moel@130	337	break;
moel@130	338
moel@130	339	default:
moel@130	340	v.Add(new Voltage("CPU VCore", 0));
moel@130	341	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	342	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	343	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	344	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	345	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	346	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	347	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	348	v.Add(new Voltage("VBat", 8));
moel@130	349	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	350	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	351	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	352	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	353	break;
moel@130	354	}
moel@130	355	break;
moel@170	356
moel@170	357	case Chip.IT8721F:
moel@177	358	switch (manufacturer) {
moel@177	359	case Manufacturer.ECS:
moel@177	360	switch (model) {
moel@177	361	case Model.A890GXM_A: // IT8721F
moel@177	362	v.Add(new Voltage("CPU VCore", 0));
moel@177	363	v.Add(new Voltage("VDIMM", 1));
moel@177	364	v.Add(new Voltage("NB Voltage", 2));
moel@195	365	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	366	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	367	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	368	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	369	t.Add(new Temperature("CPU", 0));
moel@177	370	t.Add(new Temperature("System", 1));
moel@177	371	t.Add(new Temperature("Northbridge", 2));
moel@177	372	f.Add(new Fan("CPU Fan", 0));
moel@177	373	f.Add(new Fan("System Fan", 1));
moel@177	374	f.Add(new Fan("Power Fan", 2));
moel@177	375	break;
moel@177	376	default:
moel@177	377	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	378	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	379	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	380	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	381	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	382	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	383	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	384	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	385	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	386	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	387	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	388	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	389	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	390	break;
moel@177	391	}
moel@177	392	break;
moel@177	393	default:
moel@177	394	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	395	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	396	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	397	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	398	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	399	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	400	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	401	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	402	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	403	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	404	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	405	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	406	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	407	break;
moel@177	408	}
moel@170	409	break;
moel@130	410
moel@130	411	case Chip.F71858:
moel@195	412	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	413	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	414	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	415	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	416	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	417	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	418	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	419	break;
moel@130	420	case Chip.F71862:
moel@130	421	case Chip.F71869:
moel@130	422	case Chip.F71882:
moel@130	423	case Chip.F71889ED:
moel@130	424	case Chip.F71889F:
moel@132	425	switch (manufacturer) {
moel@132	426	case Manufacturer.EVGA:
moel@132	427	switch (model) {
moel@168	428	case Model.X58_SLI_Classified: // F71882
moel@195	429	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	430	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	431	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	432	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	433	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	434	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	435	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	436	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	437	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	438	t.Add(new Temperature("CPU", 0));
moel@132	439	t.Add(new Temperature("VREG", 1));
moel@132	440	t.Add(new Temperature("System", 2));
moel@132	441	f.Add(new Fan("CPU Fan", 0));
moel@132	442	f.Add(new Fan("Power Fan", 1));
moel@132	443	f.Add(new Fan("Chassis Fan", 2));
moel@132	444	break;
moel@132	445	default:
moel@195	446	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	447	v.Add(new Voltage("CPU VCore", 1));
moel@132	448	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	449	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	450	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	451	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	452	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	453	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	454	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	455	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	456	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	457	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	458	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	459	break;
moel@132	460	}
moel@132	461	break;
moel@132	462	default:
moel@195	463	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	464	v.Add(new Voltage("CPU VCore", 1));
moel@132	465	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	466	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	467	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	468	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	469	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	470	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	471	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	472	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	473	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	474	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	475	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	476	break;
moel@132	477	}
moel@130	478	break;
moel@130	479
moel@220	480	case Chip.W83627EHF:
moel@220	481	switch (manufacturer) {
moel@220	482	case Manufacturer.ASRock:
moel@220	483	switch (model) {
moel@220	484	case Model.AOD790GX_128M: // W83627EHF
moel@220	485	v.Add(new Voltage("CPU VCore", 0));
moel@220	486	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	487	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	488	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	489	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	490	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	491	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	492	t.Add(new Temperature("CPU", 0));
moel@220	493	t.Add(new Temperature("Motherboard", 2));
moel@221	494	f.Add(new Fan("CPU Fan", 0));
moel@221	495	f.Add(new Fan("Chassis Fan", 1));
moel@220	496	break;
moel@220	497	default:
moel@220	498	v.Add(new Voltage("CPU VCore", 0));
moel@220	499	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	500	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	501	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	502	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	503	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	504	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	505	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	506	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	507	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	508	t.Add(new Temperature("CPU", 0));
moel@220	509	t.Add(new Temperature("Auxiliary", 1));
moel@220	510	t.Add(new Temperature("System", 2));
moel@220	511	f.Add(new Fan("System Fan", 0));
moel@220	512	f.Add(new Fan("CPU Fan", 1));
moel@220	513	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	514	f.Add(new Fan("CPU Fan #2", 3));
moel@220	515	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	516	break;
moel@220	517	} break;
moel@220	518	default:
moel@220	519	v.Add(new Voltage("CPU VCore", 0));
moel@220	520	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	521	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	522	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	523	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	524	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	525	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	526	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	527	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	528	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	529	t.Add(new Temperature("CPU", 0));
moel@220	530	t.Add(new Temperature("Auxiliary", 1));
moel@220	531	t.Add(new Temperature("System", 2));
moel@220	532	f.Add(new Fan("System Fan", 0));
moel@220	533	f.Add(new Fan("CPU Fan", 1));
moel@220	534	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	535	f.Add(new Fan("CPU Fan #2", 3));
moel@220	536	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	537	break;
moel@220	538	}
moel@130	539	break;
moel@130	540	case Chip.W83627DHG:
moel@130	541	case Chip.W83627DHGP:
moel@130	542	case Chip.W83667HG:
moel@130	543	case Chip.W83667HGB:
moel@152	544	switch (manufacturer) {
moel@153	545	case Manufacturer.ASRock:
moel@153	546	switch (model) {
moel@168	547	case Model._880GMH_USB3: // W83627DHG-P
moel@153	548	v.Add(new Voltage("CPU VCore", 0));
moel@195	549	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	550	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	551	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	552	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	553	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	554	t.Add(new Temperature("CPU", 0));
moel@153	555	t.Add(new Temperature("Motherboard", 2));
moel@153	556	f.Add(new Fan("Chassis Fan", 0));
moel@153	557	f.Add(new Fan("CPU Fan", 1));
moel@153	558	f.Add(new Fan("Power Fan", 2));
moel@153	559	break;
moel@153	560	default:
moel@153	561	v.Add(new Voltage("CPU VCore", 0));
moel@153	562	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	563	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	564	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	565	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	566	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	567	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	568	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	569	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	570	t.Add(new Temperature("CPU", 0));
moel@153	571	t.Add(new Temperature("Auxiliary", 1));
moel@153	572	t.Add(new Temperature("System", 2));
moel@153	573	f.Add(new Fan("System Fan", 0));
moel@153	574	f.Add(new Fan("CPU Fan", 1));
moel@153	575	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	576	f.Add(new Fan("CPU Fan #2", 3));
moel@153	577	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	578	break;
moel@153	579	}
moel@153	580	break;
moel@152	581	case Manufacturer.ASUS:
moel@152	582	switch (model) {
moel@174	583	case Model.P6X58D_E: // W83667HG
moel@174	584	case Model.Rampage_II_GENE: // W83667HG
moel@152	585	v.Add(new Voltage("CPU VCore", 0));
moel@195	586	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	587	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	588	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	589	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	590	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	591	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	592	t.Add(new Temperature("CPU", 0));
moel@174	593	t.Add(new Temperature("Motherboard", 2));
moel@174	594	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	595	f.Add(new Fan("CPU Fan", 1));
moel@174	596	f.Add(new Fan("Power Fan", 2));
moel@174	597	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	598	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	599	break;
moel@174	600	case Model.Rampage_Extreme: // W83667HG
moel@174	601	v.Add(new Voltage("CPU VCore", 0));
moel@195	602	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	603	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	604	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	605	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	606	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	607	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	608	t.Add(new Temperature("CPU", 0));
moel@152	609	t.Add(new Temperature("Motherboard", 2));
moel@152	610	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	611	f.Add(new Fan("CPU Fan", 1));
moel@153	612	f.Add(new Fan("Power Fan", 2));
moel@152	613	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	614	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	615	break;
moel@152	616	default:
moel@152	617	v.Add(new Voltage("CPU VCore", 0));
moel@152	618	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	619	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	620	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	621	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	622	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	623	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	624	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	625	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	626	t.Add(new Temperature("CPU", 0));
moel@152	627	t.Add(new Temperature("Auxiliary", 1));
moel@152	628	t.Add(new Temperature("System", 2));
moel@153	629	f.Add(new Fan("System Fan", 0));
moel@153	630	f.Add(new Fan("CPU Fan", 1));
moel@153	631	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	632	f.Add(new Fan("CPU Fan #2", 3));
moel@153	633	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	634	break;
moel@152	635	}
moel@152	636	break;
moel@152	637	default:
moel@152	638	v.Add(new Voltage("CPU VCore", 0));
moel@152	639	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	640	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	641	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	642	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	643	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	644	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	645	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	646	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	647	t.Add(new Temperature("CPU", 0));
moel@152	648	t.Add(new Temperature("Auxiliary", 1));
moel@152	649	t.Add(new Temperature("System", 2));
moel@153	650	f.Add(new Fan("System Fan", 0));
moel@153	651	f.Add(new Fan("CPU Fan", 1));
moel@153	652	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	653	f.Add(new Fan("CPU Fan #2", 3));
moel@153	654	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	655	break;
moel@152	656	}
moel@130	657	break;
moel@130	658	case Chip.W83627HF:
moel@130	659	case Chip.W83627THF:
moel@130	660	case Chip.W83687THF:
moel@130	661	v.Add(new Voltage("CPU VCore", 0));
moel@130	662	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	663	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	664	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	665	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	666	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	667	v.Add(new Voltage("VBAT", 6));
moel@130	668	t.Add(new Temperature("CPU", 0));
moel@130	669	t.Add(new Temperature("Auxiliary", 1));
moel@130	670	t.Add(new Temperature("System", 2));
moel@153	671	f.Add(new Fan("System Fan", 0));
moel@153	672	f.Add(new Fan("CPU Fan", 1));
moel@153	673	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	674	break;
moel@130	675	default:
moel@130	676	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	677	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	678	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	679	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	680	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	681	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	682	break;
moel@130	683	}
moel@130	684
moel@195	685	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	686	foreach (Voltage voltage in v)
moel@130	687	if (voltage.Index < superIO.Voltages.Length) {
moel@130	688	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	689	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	690	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	691	formula, voltage.Ri),
moel@130	692	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	693	formula, voltage.Rf),
moel@130	694	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	695	formula, voltage.Vf)
moel@165	696	}, settings);
moel@130	697	voltages.Add(sensor);
moel@130	698	}
moel@130	699
moel@130	700	foreach (Temperature temperature in t)
moel@130	701	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	702	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	703	SensorType.Temperature, this, new [] {
moel@130	704	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	705	}, settings);
moel@130	706	temperatures.Add(sensor);
moel@130	707	}
moel@130	708
moel@130	709	foreach (Fan fan in f)
moel@130	710	if (fan.Index < superIO.Fans.Length) {
moel@134	711	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	712	this, settings);
moel@130	713	fans.Add(sensor);
moel@130	714	}
moel@130	715	}
moel@130	716
moel@130	717	public override Identifier Identifier {
moel@166	718	get {
moel@166	719	return new Identifier("lpc",
moel@166	720	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));
moel@166	721	}
moel@130	722	}
moel@130	723
moel@165	724	public override HardwareType HardwareType {
moel@165	725	get { return HardwareType.SuperIO; }
moel@130	726	}
moel@130	727
moel@176	728	public override IHardware Parent {
moel@176	729	get { return mainboard; }
moel@176	730	}
moel@176	731
moel@130	732	public override string Name {
moel@130	733	get { return name; }
moel@130	734	}
moel@130	735
moel@130	736	public override string GetReport() {
moel@130	737	return superIO.GetReport();
moel@130	738	}
moel@130	739
moel@130	740	public override void Update() {
moel@130	741	superIO.Update();
moel@130	742
moel@130	743	foreach (Sensor sensor in voltages) {
moel@130	744	float? value = superIO.Voltages[sensor.Index];
moel@130	745	if (value.HasValue) {
moel@130	746	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	747	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	748	ActivateSensor(sensor);
moel@130	749	}
moel@130	750	}
moel@130	751
moel@130	752	foreach (Sensor sensor in temperatures) {
moel@130	753	float? value = superIO.Temperatures[sensor.Index];
moel@130	754	if (value.HasValue) {
moel@130	755	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	756	ActivateSensor(sensor);
moel@130	757	}
moel@130	758	}
moel@130	759
moel@130	760	foreach (Sensor sensor in fans) {
moel@130	761	float? value = superIO.Fans[sensor.Index];
moel@130	762	if (value.HasValue) {
moel@130	763	sensor.Value = value;
moel@130	764	if (value.Value > 0)
moel@130	765	ActivateSensor(sensor);
moel@130	766	}
moel@130	767	}
moel@130	768	}
moel@130	769
moel@130	770	private class Voltage {
moel@130	771	public readonly string Name;
moel@130	772	public readonly int Index;
moel@130	773	public readonly float Ri;
moel@130	774	public readonly float Rf;
moel@130	775	public readonly float Vf;
moel@130	776	public readonly bool Hidden;
moel@130	777
moel@202	778	public Voltage(string name, int index) :
moel@202	779	this(name, index, false) { }
moel@202	780
moel@130	781	public Voltage(string name, int index, bool hidden) :
moel@130	782	this(name, index, 0, 1, 0, hidden) { }
moel@202	783
moel@202	784	public Voltage(string name, int index, float ri, float rf) :
moel@202	785	this(name, index, ri, rf, 0, false) { }
moel@202	786
moel@202	787	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	788
moel@195	789	public Voltage(string name, int index,
moel@202	790	float ri, float rf, float vf, bool hidden)
moel@195	791	{
moel@130	792	this.Name = name;
moel@130	793	this.Index = index;
moel@130	794	this.Ri = ri;
moel@130	795	this.Rf = rf;
moel@130	796	this.Vf = vf;
moel@130	797	this.Hidden = hidden;
moel@130	798	}
moel@130	799	}
moel@130	800
moel@130	801	private class Temperature {
moel@130	802	public readonly string Name;
moel@130	803	public readonly int Index;
moel@130	804
moel@167	805	public Temperature(string name, int index) {
moel@130	806	this.Name = name;
moel@130	807	this.Index = index;
moel@130	808	}
moel@130	809	}
moel@130	810
moel@130	811	private class Fan {
moel@130	812	public readonly string Name;
moel@130	813	public readonly int Index;
moel@130	814
moel@130	815	public Fan(string name, int index) {
moel@130	816	this.Name = name;
moel@130	817	this.Index = index;
moel@130	818	}
moel@130	819	}
moel@130	820	}
moel@130	821	}

author	moel.mich
	Thu, 14 Oct 2010 16:52:23 +0000
changeset 221	a950ba30d4dd
parent 220	e51749b206ee
child 228	458a6c3de579
permissions	-rw-r--r--