OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@3f2d9ebacf38 (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@265	19	Portions created by the Initial Developer are Copyright (C) 2009-2011
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@228	38	using System;
moel@130	39	using System.Collections.Generic;
moel@166	40	using System.Globalization;
moel@228	41	using System.Threading;
moel@130	42	using OpenHardwareMonitor.Hardware.LPC;
moel@130	43
moel@130	44	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	45	internal class SuperIOHardware : Hardware {
moel@130	46
moel@195	47	private readonly Mainboard mainboard;
moel@195	48	private readonly ISuperIO superIO;
moel@130	49
moel@195	50	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	51	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	52	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	53	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	54
moel@228	55	private delegate float? ReadValueDelegate(int index);
moel@228	56	private delegate void UpdateDelegate();
moel@228	57
moel@228	58	// delegates for mainboard specific sensor reading code
moel@228	59	private readonly ReadValueDelegate readVoltage;
moel@228	60	private readonly ReadValueDelegate readTemperature;
moel@228	61	private readonly ReadValueDelegate readFan;
moel@323	62	private readonly ReadValueDelegate readControl;
moel@228	63
moel@228	64	// delegate for post update mainboard specific code
moel@228	65	private readonly UpdateDelegate postUpdate;
moel@228	66
moel@228	67	// mainboard specific mutex
moel@228	68	private readonly Mutex mutex;
moel@228	69
moel@176	70	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	71	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	72	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	73	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	74	settings)
moel@130	75	{
moel@176	76	this.mainboard = mainboard;
moel@130	77	this.superIO = superIO;
moel@130	78
moel@228	79	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	80	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	81	this.readFan = (index) => superIO.Fans[index];
moel@323	82	this.readControl = (index) => superIO.Controls[index];
moel@228	83
moel@228	84	this.postUpdate = () => { };
moel@228	85
moel@130	86	List<Voltage> v = new List<Voltage>();
moel@130	87	List<Temperature> t = new List<Temperature>();
moel@130	88	List<Fan> f = new List<Fan>();
moel@323	89	List<Ctrl> c = new List<Ctrl>();
moel@130	90
moel@130	91	switch (superIO.Chip) {
moel@130	92	case Chip.IT8712F:
moel@130	93	case Chip.IT8716F:
moel@130	94	case Chip.IT8718F:
moel@177	95	case Chip.IT8720F:
moel@319	96	case Chip.IT8726F:
moel@130	97	switch (manufacturer) {
moel@133	98	case Manufacturer.ASUS:
moel@133	99	switch (model) {
moel@168	100	case Model.Crosshair_III_Formula: // IT8720F
moel@133	101	v.Add(new Voltage("VBat", 8));
moel@133	102	t.Add(new Temperature("CPU", 0));
moel@133	103	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	104	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	105	break;
moel@144	106	case Model.M2N_SLI_DELUXE:
moel@133	107	v.Add(new Voltage("CPU VCore", 0));
moel@133	108	v.Add(new Voltage("+3.3V", 1));
moel@195	109	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	110	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	111	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	112	v.Add(new Voltage("VBat", 8));
moel@133	113	t.Add(new Temperature("CPU", 0));
moel@133	114	t.Add(new Temperature("Motherboard", 1));
moel@133	115	f.Add(new Fan("CPU Fan", 0));
moel@133	116	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	117	f.Add(new Fan("Power Fan", 2));
moel@133	118	break;
moel@168	119	case Model.M4A79XTD_EVO: // IT8720F
moel@195	120	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	121	v.Add(new Voltage("VBat", 8));
moel@144	122	t.Add(new Temperature("CPU", 0));
moel@144	123	t.Add(new Temperature("Motherboard", 1));
moel@144	124	f.Add(new Fan("CPU Fan", 0));
moel@144	125	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	126	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	127	break;
moel@133	128	default:
moel@133	129	v.Add(new Voltage("CPU VCore", 0));
moel@133	130	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	131	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	132	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	133	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	134	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	135	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	136	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	137	v.Add(new Voltage("VBat", 8));
moel@133	138	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	139	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	140	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	141	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	142	break;
moel@133	143	}
moel@133	144	break;
moel@221	145
moel@221	146	case Manufacturer.ASRock:
moel@221	147	switch (model) {
moel@221	148	case Model.P55_Deluxe: // IT8720F
moel@228	149
moel@221	150	v.Add(new Voltage("CPU VCore", 0));
moel@221	151	v.Add(new Voltage("+3.3V", 2));
moel@221	152	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	153	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	154	v.Add(new Voltage("VBat", 8));
moel@221	155	t.Add(new Temperature("CPU", 0));
moel@221	156	t.Add(new Temperature("Motherboard", 1));
moel@221	157	f.Add(new Fan("CPU Fan", 0));
moel@221	158	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	159
moel@228	160	// this mutex is also used by the official ASRock tool
moel@228	161	mutex = new Mutex(false, "ASRockOCMark");
moel@228	162
moel@228	163	bool exclusiveAccess = false;
moel@228	164	try {
moel@228	165	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	166	} catch (AbandonedMutexException) { }
moel@228	167	catch (InvalidOperationException) { }
moel@228	168
moel@228	169	// only read additional fans if we get exclusive access
moel@228	170	if (exclusiveAccess) {
moel@228	171
moel@228	172	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	173	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	174	f.Add(new Fan("Power Fan", 4));
moel@228	175
moel@228	176	readFan = (index) => {
moel@228	177	if (index < 2) {
moel@228	178	return superIO.Fans[index];
moel@228	179	} else {
moel@228	180	// get GPIO 80-87
moel@228	181	byte? gpio = superIO.ReadGPIO(7);
moel@228	182	if (!gpio.HasValue)
moel@228	183	return null;
moel@228	184
moel@228	185	// read the last 3 fans based on GPIO 83-85
moel@228	186	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	187	return (((gpio.Value >> 3) & 0x07) ==
moel@228	188	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	189	}
moel@228	190	};
moel@228	191
moel@228	192	int fanIndex = 0;
moel@228	193	postUpdate = () => {
moel@228	194	// get GPIO 80-87
moel@228	195	byte? gpio = superIO.ReadGPIO(7);
moel@228	196	if (!gpio.HasValue)
moel@228	197	return;
moel@228	198
moel@228	199	// prepare the GPIO 83-85 for the next update
moel@228	200	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	201	superIO.WriteGPIO(7,
moel@228	202	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	203	fanIndex = (fanIndex + 1) % 3;
moel@228	204	};
moel@228	205	}
moel@228	206
moel@221	207	break;
moel@221	208	default:
moel@221	209	v.Add(new Voltage("CPU VCore", 0));
moel@221	210	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	211	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	212	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	213	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	214	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	215	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	216	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	217	v.Add(new Voltage("VBat", 8));
moel@221	218	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	219	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	220	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	221	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	222	break;
moel@221	223	};
moel@221	224	break;
moel@221	225
moel@130	226	case Manufacturer.DFI:
moel@130	227	switch (model) {
moel@168	228	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	229	v.Add(new Voltage("CPU VCore", 0));
moel@130	230	v.Add(new Voltage("FSB VTT", 1));
moel@130	231	v.Add(new Voltage("+3.3V", 2));
moel@195	232	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	233	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	234	v.Add(new Voltage("NB Core", 5));
moel@130	235	v.Add(new Voltage("VDIMM", 6));
moel@195	236	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	237	v.Add(new Voltage("VBat", 8));
moel@130	238	t.Add(new Temperature("CPU", 0));
moel@130	239	t.Add(new Temperature("System", 1));
moel@130	240	t.Add(new Temperature("Chipset", 2));
moel@130	241	f.Add(new Fan("Fan #1", 0));
moel@130	242	f.Add(new Fan("Fan #2", 1));
moel@130	243	f.Add(new Fan("Fan #3", 2));
moel@130	244	break;
moel@168	245	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	246	v.Add(new Voltage("CPU VCore", 0));
moel@130	247	v.Add(new Voltage("VTT", 1));
moel@130	248	v.Add(new Voltage("+3.3V", 2));
moel@195	249	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	250	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	251	v.Add(new Voltage("CPU PLL", 5));
moel@130	252	v.Add(new Voltage("DRAM", 6));
moel@195	253	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	254	v.Add(new Voltage("VBat", 8));
moel@130	255	t.Add(new Temperature("Chipset", 0));
moel@130	256	t.Add(new Temperature("CPU PWM", 1));
moel@130	257	t.Add(new Temperature("CPU", 2));
moel@130	258	f.Add(new Fan("Fan #1", 0));
moel@130	259	f.Add(new Fan("Fan #2", 1));
moel@130	260	f.Add(new Fan("Fan #3", 2));
moel@130	261	break;
moel@130	262	default:
moel@130	263	v.Add(new Voltage("CPU VCore", 0));
moel@130	264	v.Add(new Voltage("VTT", 1, true));
moel@130	265	v.Add(new Voltage("+3.3V", 2, true));
moel@130	266	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	267	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	268	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	269	v.Add(new Voltage("DRAM", 6, true));
moel@130	270	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	271	v.Add(new Voltage("VBat", 8));
moel@130	272	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	273	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	274	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	275	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	276	break;
moel@130	277	}
moel@130	278	break;
moel@130	279
moel@130	280	case Manufacturer.Gigabyte:
moel@130	281	switch (model) {
moel@168	282	case Model._965P_S3: // IT8718F
moel@130	283	v.Add(new Voltage("CPU VCore", 0));
moel@130	284	v.Add(new Voltage("DRAM", 1));
moel@130	285	v.Add(new Voltage("+3.3V", 2));
moel@195	286	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	287	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	288	v.Add(new Voltage("VBat", 8));
moel@130	289	t.Add(new Temperature("System", 0));
moel@130	290	t.Add(new Temperature("CPU", 1));
moel@130	291	f.Add(new Fan("CPU Fan", 0));
moel@130	292	f.Add(new Fan("System Fan", 1));
moel@130	293	break;
moel@168	294	case Model.EP45_DS3R: // IT8718F
moel@130	295	case Model.EP45_UD3R:
moel@138	296	case Model.X38_DS5:
moel@130	297	v.Add(new Voltage("CPU VCore", 0));
moel@130	298	v.Add(new Voltage("DRAM", 1));
moel@130	299	v.Add(new Voltage("+3.3V", 2));
moel@195	300	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	301	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	302	v.Add(new Voltage("VBat", 8));
moel@130	303	t.Add(new Temperature("System", 0));
moel@130	304	t.Add(new Temperature("CPU", 1));
moel@130	305	f.Add(new Fan("CPU Fan", 0));
moel@130	306	f.Add(new Fan("System Fan #2", 1));
moel@130	307	f.Add(new Fan("Power Fan", 2));
moel@130	308	f.Add(new Fan("System Fan #1", 3));
moel@130	309	break;
moel@168	310	case Model.EX58_EXTREME: // IT8720F
moel@133	311	v.Add(new Voltage("CPU VCore", 0));
moel@133	312	v.Add(new Voltage("DRAM", 1));
moel@195	313	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	314	v.Add(new Voltage("VBat", 8));
moel@133	315	t.Add(new Temperature("System", 0));
moel@133	316	t.Add(new Temperature("CPU", 1));
moel@138	317	t.Add(new Temperature("Northbridge", 2));
moel@133	318	f.Add(new Fan("CPU Fan", 0));
moel@133	319	f.Add(new Fan("System Fan #2", 1));
moel@133	320	f.Add(new Fan("Power Fan", 2));
moel@133	321	f.Add(new Fan("System Fan #1", 3));
moel@133	322	break;
moel@168	323	case Model.P35_DS3: // IT8718F
moel@168	324	case Model.P35_DS3L: // IT8718F
moel@130	325	v.Add(new Voltage("CPU VCore", 0));
moel@130	326	v.Add(new Voltage("DRAM", 1));
moel@130	327	v.Add(new Voltage("+3.3V", 2));
moel@195	328	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	329	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	330	v.Add(new Voltage("VBat", 8));
moel@130	331	t.Add(new Temperature("System", 0));
moel@130	332	t.Add(new Temperature("CPU", 1));
moel@130	333	f.Add(new Fan("CPU Fan", 0));
moel@130	334	f.Add(new Fan("System Fan #1", 1));
moel@130	335	f.Add(new Fan("System Fan #2", 2));
moel@130	336	f.Add(new Fan("Power Fan", 3));
moel@130	337	break;
moel@168	338	case Model.P55_UD4: // IT8720F
moel@168	339	case Model.P55M_UD4: // IT8720F
moel@148	340	v.Add(new Voltage("CPU VCore", 0));
moel@148	341	v.Add(new Voltage("DRAM", 1));
moel@148	342	v.Add(new Voltage("+3.3V", 2));
moel@195	343	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	344	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	345	v.Add(new Voltage("VBat", 8));
moel@148	346	t.Add(new Temperature("System", 0));
moel@148	347	t.Add(new Temperature("CPU", 2));
moel@148	348	f.Add(new Fan("CPU Fan", 0));
moel@148	349	f.Add(new Fan("System Fan #2", 1));
moel@148	350	f.Add(new Fan("Power Fan", 2));
moel@148	351	f.Add(new Fan("System Fan #1", 3));
moel@148	352	break;
moel@168	353	case Model.GA_MA770T_UD3: // IT8720F
moel@154	354	v.Add(new Voltage("CPU VCore", 0));
moel@154	355	v.Add(new Voltage("DRAM", 1));
moel@154	356	v.Add(new Voltage("+3.3V", 2));
moel@195	357	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	358	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	359	v.Add(new Voltage("VBat", 8));
moel@154	360	t.Add(new Temperature("System", 0));
moel@154	361	t.Add(new Temperature("CPU", 1));
moel@154	362	f.Add(new Fan("CPU Fan", 0));
moel@154	363	f.Add(new Fan("System Fan #1", 1));
moel@154	364	f.Add(new Fan("System Fan #2", 2));
moel@154	365	f.Add(new Fan("Power Fan", 3));
moel@154	366	break;
moel@168	367	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	368	v.Add(new Voltage("CPU VCore", 0));
moel@130	369	v.Add(new Voltage("DRAM", 1));
moel@130	370	v.Add(new Voltage("+3.3V", 2));
moel@195	371	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	372	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	373	v.Add(new Voltage("VBat", 8));
moel@130	374	t.Add(new Temperature("System", 0));
moel@130	375	t.Add(new Temperature("CPU", 1));
moel@130	376	f.Add(new Fan("CPU Fan", 0));
moel@130	377	f.Add(new Fan("System Fan", 1));
moel@130	378	f.Add(new Fan("NB Fan", 2));
moel@130	379	break;
moel@168	380	case Model.X58A_UD3R: // IT8720F
moel@138	381	v.Add(new Voltage("CPU VCore", 0));
moel@138	382	v.Add(new Voltage("DRAM", 1));
moel@138	383	v.Add(new Voltage("+3.3V", 2));
moel@195	384	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	385	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	386	v.Add(new Voltage("VBat", 8));
moel@138	387	t.Add(new Temperature("System", 0));
moel@138	388	t.Add(new Temperature("CPU", 1));
moel@138	389	t.Add(new Temperature("Northbridge", 2));
moel@138	390	f.Add(new Fan("CPU Fan", 0));
moel@138	391	f.Add(new Fan("System Fan #2", 1));
moel@138	392	f.Add(new Fan("Power Fan", 2));
moel@138	393	f.Add(new Fan("System Fan #1", 3));
moel@138	394	break;
moel@130	395	default:
moel@130	396	v.Add(new Voltage("CPU VCore", 0));
moel@130	397	v.Add(new Voltage("DRAM", 1, true));
moel@130	398	v.Add(new Voltage("+3.3V", 2, true));
moel@130	399	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	400	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	401	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	402	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	403	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	404	v.Add(new Voltage("VBat", 8));
moel@130	405	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	406	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	407	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	408	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	409	break;
moel@130	410	}
moel@130	411	break;
moel@130	412
moel@130	413	default:
moel@130	414	v.Add(new Voltage("CPU VCore", 0));
moel@130	415	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	416	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	417	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	418	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	419	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	420	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	421	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	422	v.Add(new Voltage("VBat", 8));
moel@130	423	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	424	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	425	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	426	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	427	break;
moel@130	428	}
moel@130	429	break;
moel@170	430
moel@170	431	case Chip.IT8721F:
moel@277	432	case Chip.IT8728F:
moel@319	433	case Chip.IT8772E:
moel@177	434	switch (manufacturer) {
moel@177	435	case Manufacturer.ECS:
moel@177	436	switch (model) {
moel@177	437	case Model.A890GXM_A: // IT8721F
moel@177	438	v.Add(new Voltage("CPU VCore", 0));
moel@177	439	v.Add(new Voltage("VDIMM", 1));
moel@177	440	v.Add(new Voltage("NB Voltage", 2));
moel@195	441	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	442	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	443	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	444	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	445	t.Add(new Temperature("CPU", 0));
moel@177	446	t.Add(new Temperature("System", 1));
moel@177	447	t.Add(new Temperature("Northbridge", 2));
moel@177	448	f.Add(new Fan("CPU Fan", 0));
moel@177	449	f.Add(new Fan("System Fan", 1));
moel@177	450	f.Add(new Fan("Power Fan", 2));
moel@177	451	break;
moel@177	452	default:
moel@177	453	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	454	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	455	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	456	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	457	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	458	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	459	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	460	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	461	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	462	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	463	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	464	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	465	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	466	break;
moel@177	467	}
moel@177	468	break;
moel@278	469	case Manufacturer.Gigabyte:
moel@278	470	switch (model) {
moel@290	471	case Model.P67A_UD4_B3: // IT8728F
moel@278	472	v.Add(new Voltage("+12V", 0, 100, 10));
moel@278	473	v.Add(new Voltage("+5V", 1, 15, 10));
moel@278	474	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	475	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	476	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	477	v.Add(new Voltage("CPU VCore", 5));
moel@278	478	v.Add(new Voltage("DRAM", 6));
moel@278	479	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	480	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	481	t.Add(new Temperature("System", 0));
moel@278	482	t.Add(new Temperature("CPU", 2));
moel@278	483	f.Add(new Fan("CPU Fan", 0));
moel@278	484	f.Add(new Fan("System Fan #2", 1));
moel@278	485	f.Add(new Fan("Power Fan", 2));
moel@278	486	f.Add(new Fan("System Fan #1", 3));
moel@278	487	break;
moel@290	488	case Model.H67A_UD3H_B3: // IT8728F
moel@290	489	v.Add(new Voltage("VTT", 0));
moel@290	490	v.Add(new Voltage("+5V", 1, 15, 10));
moel@290	491	v.Add(new Voltage("+12V", 2, 68, 22));
moel@290	492	v.Add(new Voltage("Voltage #4", 3, true));
moel@290	493	v.Add(new Voltage("Voltage #5", 4, true));
moel@290	494	v.Add(new Voltage("CPU VCore", 5));
moel@290	495	v.Add(new Voltage("DRAM", 6));
moel@290	496	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290	497	v.Add(new Voltage("VBat", 8, 10, 10));
moel@290	498	t.Add(new Temperature("System", 0));
moel@290	499	t.Add(new Temperature("CPU", 2));
moel@290	500	f.Add(new Fan("CPU Fan", 0));
moel@290	501	f.Add(new Fan("System Fan #1", 1));
moel@290	502	f.Add(new Fan("Power Fan", 2));
moel@290	503	f.Add(new Fan("System Fan #2", 3));
moel@290	504	break;
moel@305	505	case Model.Z68X_UD7_B3: // IT8728F
moel@305	506	v.Add(new Voltage("VTT", 0));
moel@307	507	v.Add(new Voltage("+3.3V", 1, 13.3f, 20.5f));
moel@305	508	v.Add(new Voltage("+12V", 2, 68, 22));
moel@307	509	v.Add(new Voltage("+5V", 3, 14.3f, 20));
moel@305	510	v.Add(new Voltage("CPU VCore", 5));
moel@305	511	v.Add(new Voltage("DRAM", 6));
moel@305	512	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305	513	v.Add(new Voltage("VBat", 8, 10, 10));
moel@305	514	t.Add(new Temperature("System", 0));
moel@305	515	t.Add(new Temperature("CPU", 1));
moel@305	516	t.Add(new Temperature("System 3", 2));
moel@305	517	f.Add(new Fan("CPU Fan", 0));
moel@305	518	f.Add(new Fan("Power Fan", 1));
moel@305	519	f.Add(new Fan("System Fan #1", 2));
moel@305	520	f.Add(new Fan("System Fan #2", 3));
moel@305	521	f.Add(new Fan("System Fan #3", 4));
moel@305	522	break;
moel@278	523	default:
moel@278	524	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	525	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	526	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	527	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	528	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	529	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	530	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	531	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	532	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	533	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	534	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	535	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	536	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	537	break;
moel@278	538	}
moel@278	539	break;
moel@320	540	case Manufacturer.Shuttle:
moel@320	541	switch (model) {
moel@320	542	case Model.FH67: // IT8772E
moel@320	543	v.Add(new Voltage("CPU VCore", 0));
moel@320	544	v.Add(new Voltage("DRAM", 1));
moel@320	545	v.Add(new Voltage("PCH VCCIO", 2));
moel@320	546	v.Add(new Voltage("CPU VCCIO", 3));
moel@320	547	v.Add(new Voltage("Graphic Voltage", 4));
moel@320	548	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320	549	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	550	t.Add(new Temperature("System", 0));
moel@320	551	t.Add(new Temperature("CPU", 1));
moel@320	552	f.Add(new Fan("Fan #1", 0));
moel@320	553	f.Add(new Fan("CPU Fan", 1));
moel@320	554	break;
moel@320	555	default:
moel@320	556	v.Add(new Voltage("Voltage #1", 0, true));
moel@320	557	v.Add(new Voltage("Voltage #2", 1, true));
moel@320	558	v.Add(new Voltage("Voltage #3", 2, true));
moel@320	559	v.Add(new Voltage("Voltage #4", 3, true));
moel@320	560	v.Add(new Voltage("Voltage #5", 4, true));
moel@320	561	v.Add(new Voltage("Voltage #6", 5, true));
moel@320	562	v.Add(new Voltage("Voltage #7", 6, true));
moel@320	563	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320	564	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	565	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320	566	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320	567	for (int i = 0; i < superIO.Fans.Length; i++)
moel@320	568	f.Add(new Fan("Fan #" + (i + 1), i));
moel@320	569	break;
moel@320	570	}
moel@320	571	break;
moel@177	572	default:
moel@177	573	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	574	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	575	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	576	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	577	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	578	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	579	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	580	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	581	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	582	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	583	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	584	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	585	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	586	break;
moel@177	587	}
moel@170	588	break;
moel@130	589
moel@130	590	case Chip.F71858:
moel@195	591	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	592	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	593	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	594	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	595	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	596	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	597	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	598	break;
moel@130	599	case Chip.F71862:
moel@130	600	case Chip.F71869:
moel@130	601	case Chip.F71882:
moel@296	602	case Chip.F71889AD:
moel@130	603	case Chip.F71889ED:
moel@130	604	case Chip.F71889F:
moel@132	605	switch (manufacturer) {
moel@132	606	case Manufacturer.EVGA:
moel@132	607	switch (model) {
moel@168	608	case Model.X58_SLI_Classified: // F71882
moel@195	609	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	610	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	611	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	612	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	613	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	614	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	615	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	616	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	617	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	618	t.Add(new Temperature("CPU", 0));
moel@132	619	t.Add(new Temperature("VREG", 1));
moel@132	620	t.Add(new Temperature("System", 2));
moel@132	621	f.Add(new Fan("CPU Fan", 0));
moel@132	622	f.Add(new Fan("Power Fan", 1));
moel@132	623	f.Add(new Fan("Chassis Fan", 2));
moel@132	624	break;
moel@132	625	default:
moel@195	626	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	627	v.Add(new Voltage("CPU VCore", 1));
moel@132	628	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	629	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	630	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	631	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	632	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	633	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	634	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	635	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	636	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	637	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	638	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	639	break;
moel@132	640	}
moel@132	641	break;
moel@132	642	default:
moel@195	643	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	644	v.Add(new Voltage("CPU VCore", 1));
moel@132	645	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	646	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	647	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	648	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	649	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	650	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	651	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	652	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	653	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	654	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	655	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	656	break;
moel@132	657	}
moel@130	658	break;
moel@130	659
moel@220	660	case Chip.W83627EHF:
moel@220	661	switch (manufacturer) {
moel@220	662	case Manufacturer.ASRock:
moel@220	663	switch (model) {
moel@220	664	case Model.AOD790GX_128M: // W83627EHF
moel@220	665	v.Add(new Voltage("CPU VCore", 0));
moel@220	666	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	667	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	668	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	669	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	670	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	671	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	672	t.Add(new Temperature("CPU", 0));
moel@220	673	t.Add(new Temperature("Motherboard", 2));
moel@221	674	f.Add(new Fan("CPU Fan", 0));
moel@221	675	f.Add(new Fan("Chassis Fan", 1));
moel@220	676	break;
moel@220	677	default:
moel@220	678	v.Add(new Voltage("CPU VCore", 0));
moel@220	679	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	680	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	681	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	682	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	683	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	684	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	685	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	686	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	687	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	688	t.Add(new Temperature("CPU", 0));
moel@220	689	t.Add(new Temperature("Auxiliary", 1));
moel@220	690	t.Add(new Temperature("System", 2));
moel@220	691	f.Add(new Fan("System Fan", 0));
moel@220	692	f.Add(new Fan("CPU Fan", 1));
moel@220	693	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	694	f.Add(new Fan("CPU Fan #2", 3));
moel@220	695	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	696	break;
moel@220	697	} break;
moel@220	698	default:
moel@220	699	v.Add(new Voltage("CPU VCore", 0));
moel@220	700	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	701	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	702	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	703	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	704	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	705	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	706	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	707	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	708	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	709	t.Add(new Temperature("CPU", 0));
moel@220	710	t.Add(new Temperature("Auxiliary", 1));
moel@220	711	t.Add(new Temperature("System", 2));
moel@220	712	f.Add(new Fan("System Fan", 0));
moel@220	713	f.Add(new Fan("CPU Fan", 1));
moel@220	714	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	715	f.Add(new Fan("CPU Fan #2", 3));
moel@220	716	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	717	break;
moel@220	718	}
moel@130	719	break;
moel@130	720	case Chip.W83627DHG:
moel@130	721	case Chip.W83627DHGP:
moel@130	722	case Chip.W83667HG:
moel@130	723	case Chip.W83667HGB:
moel@152	724	switch (manufacturer) {
moel@153	725	case Manufacturer.ASRock:
moel@153	726	switch (model) {
moel@168	727	case Model._880GMH_USB3: // W83627DHG-P
moel@153	728	v.Add(new Voltage("CPU VCore", 0));
moel@195	729	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	730	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	731	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	732	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	733	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	734	t.Add(new Temperature("CPU", 0));
moel@153	735	t.Add(new Temperature("Motherboard", 2));
moel@153	736	f.Add(new Fan("Chassis Fan", 0));
moel@153	737	f.Add(new Fan("CPU Fan", 1));
moel@153	738	f.Add(new Fan("Power Fan", 2));
moel@153	739	break;
moel@153	740	default:
moel@153	741	v.Add(new Voltage("CPU VCore", 0));
moel@153	742	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	743	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	744	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	745	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	746	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	747	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	748	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	749	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	750	t.Add(new Temperature("CPU", 0));
moel@153	751	t.Add(new Temperature("Auxiliary", 1));
moel@153	752	t.Add(new Temperature("System", 2));
moel@153	753	f.Add(new Fan("System Fan", 0));
moel@153	754	f.Add(new Fan("CPU Fan", 1));
moel@153	755	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	756	f.Add(new Fan("CPU Fan #2", 3));
moel@153	757	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	758	break;
moel@153	759	}
moel@153	760	break;
moel@152	761	case Manufacturer.ASUS:
moel@152	762	switch (model) {
moel@174	763	case Model.P6X58D_E: // W83667HG
moel@174	764	case Model.Rampage_II_GENE: // W83667HG
moel@152	765	v.Add(new Voltage("CPU VCore", 0));
moel@195	766	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	767	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	768	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	769	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	770	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	771	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	772	t.Add(new Temperature("CPU", 0));
moel@174	773	t.Add(new Temperature("Motherboard", 2));
moel@174	774	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	775	f.Add(new Fan("CPU Fan", 1));
moel@174	776	f.Add(new Fan("Power Fan", 2));
moel@174	777	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	778	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	779	break;
moel@174	780	case Model.Rampage_Extreme: // W83667HG
moel@174	781	v.Add(new Voltage("CPU VCore", 0));
moel@195	782	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	783	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	784	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	785	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	786	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	787	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	788	t.Add(new Temperature("CPU", 0));
moel@152	789	t.Add(new Temperature("Motherboard", 2));
moel@152	790	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	791	f.Add(new Fan("CPU Fan", 1));
moel@153	792	f.Add(new Fan("Power Fan", 2));
moel@152	793	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	794	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	795	break;
moel@152	796	default:
moel@152	797	v.Add(new Voltage("CPU VCore", 0));
moel@152	798	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	799	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	800	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	801	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	802	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	803	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	804	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	805	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	806	t.Add(new Temperature("CPU", 0));
moel@152	807	t.Add(new Temperature("Auxiliary", 1));
moel@152	808	t.Add(new Temperature("System", 2));
moel@153	809	f.Add(new Fan("System Fan", 0));
moel@153	810	f.Add(new Fan("CPU Fan", 1));
moel@153	811	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	812	f.Add(new Fan("CPU Fan #2", 3));
moel@153	813	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	814	break;
moel@152	815	}
moel@152	816	break;
moel@152	817	default:
moel@152	818	v.Add(new Voltage("CPU VCore", 0));
moel@152	819	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	820	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	821	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	822	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	823	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	824	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	825	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	826	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	827	t.Add(new Temperature("CPU", 0));
moel@152	828	t.Add(new Temperature("Auxiliary", 1));
moel@152	829	t.Add(new Temperature("System", 2));
moel@153	830	f.Add(new Fan("System Fan", 0));
moel@153	831	f.Add(new Fan("CPU Fan", 1));
moel@153	832	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	833	f.Add(new Fan("CPU Fan #2", 3));
moel@153	834	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	835	break;
moel@152	836	}
moel@130	837	break;
moel@130	838	case Chip.W83627HF:
moel@130	839	case Chip.W83627THF:
moel@130	840	case Chip.W83687THF:
moel@130	841	v.Add(new Voltage("CPU VCore", 0));
moel@130	842	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	843	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	844	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	845	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	846	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	847	v.Add(new Voltage("VBAT", 6));
moel@130	848	t.Add(new Temperature("CPU", 0));
moel@130	849	t.Add(new Temperature("Auxiliary", 1));
moel@130	850	t.Add(new Temperature("System", 2));
moel@153	851	f.Add(new Fan("System Fan", 0));
moel@153	852	f.Add(new Fan("CPU Fan", 1));
moel@153	853	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	854	break;
moel@245	855	case Chip.NCT6771F:
moel@265	856	case Chip.NCT6776F:
moel@265	857	switch (manufacturer) {
moel@265	858	case Manufacturer.ASUS:
moel@265	859	switch (model) {
moel@312	860	case Model.P8P67: // NCT6776F
moel@311	861	case Model.P8P67_EVO: // NCT6776F
moel@265	862	case Model.P8P67_PRO: // NCT6776F
moel@265	863	v.Add(new Voltage("CPU VCore", 0));
moel@310	864	v.Add(new Voltage("+12V", 1, 11, 1));
moel@310	865	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	866	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310	867	v.Add(new Voltage("+5V", 4, 12, 3));
moel@310	868	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265	869	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310	870	t.Add(new Temperature("CPU", 0));
moel@276	871	t.Add(new Temperature("Auxiliary", 2));
moel@310	872	t.Add(new Temperature("Motherboard", 3));
moel@310	873	f.Add(new Fan("Chassis Fan #1", 0));
moel@265	874	f.Add(new Fan("CPU Fan", 1));
moel@310	875	f.Add(new Fan("Power Fan", 2));
moel@310	876	f.Add(new Fan("Chassis Fan #2", 3));
moel@323	877	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323	878	c.Add(new Ctrl("CPU Fan", 1));
moel@323	879	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265	880	break;
moel@276	881	case Model.P8P67_M_PRO: // NCT6776F
moel@276	882	v.Add(new Voltage("CPU VCore", 0));
moel@276	883	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	884	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	885	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276	886	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	887	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	888	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	889	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	890	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	891	t.Add(new Temperature("CPU", 0));
moel@276	892	t.Add(new Temperature("Motherboard", 3));
moel@276	893	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	894	f.Add(new Fan("CPU Fan", 1));
moel@276	895	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	896	f.Add(new Fan("Power Fan", 3));
moel@276	897	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	898	break;
moel@265	899	default:
moel@265	900	v.Add(new Voltage("CPU VCore", 0));
moel@265	901	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	902	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	903	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	904	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	905	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	906	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	907	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	908	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	909	t.Add(new Temperature("CPU", 0));
moel@276	910	t.Add(new Temperature("CPU", 1));
moel@276	911	t.Add(new Temperature("Auxiliary", 2));
moel@276	912	t.Add(new Temperature("System", 3));
moel@265	913	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	914	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	915	break;
moel@265	916	}
moel@265	917	break;
moel@265	918	default:
moel@265	919	v.Add(new Voltage("CPU VCore", 0));
moel@265	920	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	921	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	922	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	923	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	924	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	925	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	926	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	927	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	928	t.Add(new Temperature("CPU", 0));
moel@276	929	t.Add(new Temperature("CPU", 1));
moel@276	930	t.Add(new Temperature("Auxiliary", 2));
moel@276	931	t.Add(new Temperature("System", 3));
moel@265	932	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	933	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	934	break;
moel@265	935	}
moel@245	936	break;
moel@130	937	default:
moel@130	938	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	939	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	940	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	941	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	942	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	943	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	944	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	945	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	946	break;
moel@130	947	}
moel@130	948
moel@195	949	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	950	foreach (Voltage voltage in v)
moel@130	951	if (voltage.Index < superIO.Voltages.Length) {
moel@130	952	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	953	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	954	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	955	formula, voltage.Ri),
moel@130	956	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	957	formula, voltage.Rf),
moel@130	958	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	959	formula, voltage.Vf)
moel@165	960	}, settings);
moel@130	961	voltages.Add(sensor);
moel@130	962	}
moel@130	963
moel@130	964	foreach (Temperature temperature in t)
moel@130	965	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	966	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	967	SensorType.Temperature, this, new [] {
moel@130	968	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	969	}, settings);
moel@130	970	temperatures.Add(sensor);
moel@130	971	}
moel@130	972
moel@130	973	foreach (Fan fan in f)
moel@130	974	if (fan.Index < superIO.Fans.Length) {
moel@134	975	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	976	this, settings);
moel@130	977	fans.Add(sensor);
moel@130	978	}
moel@323	979
moel@323	980	foreach (Ctrl ctrl in c) {
moel@323	981	int index = ctrl.Index;
moel@323	982	if (index < superIO.Controls.Length) {
moel@323	983	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323	984	this, settings);
moel@323	985	Control control = new Control(sensor, settings, 0, 100);
moel@323	986	control.ControlModeChanged += (cc) => {
moel@323	987	if (cc.ControlMode == ControlMode.Default) {
moel@323	988	superIO.SetControl(index, null);
moel@323	989	} else {
moel@323	990	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	991	}
moel@323	992	};
moel@323	993	control.SoftwareControlValueChanged += (cc) => {
moel@323	994	if (cc.ControlMode == ControlMode.Software)
moel@323	995	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	996	};
moel@323	997	if (control.ControlMode == ControlMode.Software)
moel@323	998	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323	999	sensor.Control = control;
moel@323	1000	controls.Add(sensor);
moel@323	1001	}
moel@323	1002	}
moel@130	1003	}
moel@130	1004
moel@165	1005	public override HardwareType HardwareType {
moel@165	1006	get { return HardwareType.SuperIO; }
moel@130	1007	}
moel@130	1008
moel@176	1009	public override IHardware Parent {
moel@176	1010	get { return mainboard; }
moel@176	1011	}
moel@176	1012
moel@130	1013
moel@130	1014	public override string GetReport() {
moel@130	1015	return superIO.GetReport();
moel@130	1016	}
moel@130	1017
moel@130	1018	public override void Update() {
moel@130	1019	superIO.Update();
moel@130	1020
moel@130	1021	foreach (Sensor sensor in voltages) {
moel@228	1022	float? value = readVoltage(sensor.Index);
moel@130	1023	if (value.HasValue) {
moel@130	1024	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1025	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1026	ActivateSensor(sensor);
moel@130	1027	}
moel@130	1028	}
moel@130	1029
moel@130	1030	foreach (Sensor sensor in temperatures) {
moel@228	1031	float? value = readTemperature(sensor.Index);
moel@130	1032	if (value.HasValue) {
moel@130	1033	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1034	ActivateSensor(sensor);
moel@130	1035	}
moel@130	1036	}
moel@130	1037
moel@130	1038	foreach (Sensor sensor in fans) {
moel@228	1039	float? value = readFan(sensor.Index);
moel@130	1040	if (value.HasValue) {
moel@130	1041	sensor.Value = value;
moel@130	1042	if (value.Value > 0)
moel@130	1043	ActivateSensor(sensor);
moel@130	1044	}
moel@130	1045	}
moel@228	1046
moel@323	1047	foreach (Sensor sensor in controls) {
moel@323	1048	float? value = readControl(sensor.Index);
moel@323	1049	if (value.HasValue) {
moel@323	1050	sensor.Value = value;
moel@323	1051	ActivateSensor(sensor);
moel@323	1052	}
moel@323	1053	}
moel@323	1054
moel@228	1055	postUpdate();
moel@130	1056	}
moel@130	1057
moel@323	1058	public override void Close() {
moel@323	1059	foreach (Sensor sensor in controls) {
moel@323	1060	// restore all controls back to default
moel@323	1061	superIO.SetControl(sensor.Index, null);
moel@323	1062	}
moel@323	1063	base.Close();
moel@323	1064	}
moel@323	1065
moel@130	1066	private class Voltage {
moel@130	1067	public readonly string Name;
moel@130	1068	public readonly int Index;
moel@130	1069	public readonly float Ri;
moel@130	1070	public readonly float Rf;
moel@130	1071	public readonly float Vf;
moel@130	1072	public readonly bool Hidden;
moel@130	1073
moel@202	1074	public Voltage(string name, int index) :
moel@202	1075	this(name, index, false) { }
moel@202	1076
moel@130	1077	public Voltage(string name, int index, bool hidden) :
moel@130	1078	this(name, index, 0, 1, 0, hidden) { }
moel@202	1079
moel@202	1080	public Voltage(string name, int index, float ri, float rf) :
moel@202	1081	this(name, index, ri, rf, 0, false) { }
moel@202	1082
moel@202	1083	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1084
moel@195	1085	public Voltage(string name, int index,
moel@202	1086	float ri, float rf, float vf, bool hidden)
moel@195	1087	{
moel@130	1088	this.Name = name;
moel@130	1089	this.Index = index;
moel@130	1090	this.Ri = ri;
moel@130	1091	this.Rf = rf;
moel@130	1092	this.Vf = vf;
moel@130	1093	this.Hidden = hidden;
moel@130	1094	}
moel@130	1095	}
moel@130	1096
moel@130	1097	private class Temperature {
moel@130	1098	public readonly string Name;
moel@130	1099	public readonly int Index;
moel@130	1100
moel@167	1101	public Temperature(string name, int index) {
moel@130	1102	this.Name = name;
moel@130	1103	this.Index = index;
moel@130	1104	}
moel@130	1105	}
moel@130	1106
moel@130	1107	private class Fan {
moel@130	1108	public readonly string Name;
moel@130	1109	public readonly int Index;
moel@130	1110
moel@130	1111	public Fan(string name, int index) {
moel@130	1112	this.Name = name;
moel@130	1113	this.Index = index;
moel@130	1114	}
moel@130	1115	}
moel@323	1116
moel@323	1117	private class Ctrl {
moel@323	1118	public readonly string Name;
moel@323	1119	public readonly int Index;
moel@323	1120
moel@323	1121	public Ctrl(string name, int index) {
moel@323	1122	this.Name = name;
moel@323	1123	this.Index = index;
moel@323	1124	}
moel@323	1125	}
moel@130	1126	}
moel@130	1127	}

author	moel.mich
	Wed, 31 Aug 2011 22:48:49 +0000
changeset 323	3f2d9ebacf38
parent 320	df3493f75225
child 332	19b1e150e7af
permissions	-rw-r--r--