OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@e51749b206ee (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@130	19	Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@130	38	using System.Collections.Generic;
moel@166	39	using System.Globalization;
moel@130	40	using OpenHardwareMonitor.Hardware.LPC;
moel@130	41
moel@130	42	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	43	internal class SuperIOHardware : Hardware {
moel@130	44
moel@195	45	private readonly Mainboard mainboard;
moel@195	46	private readonly ISuperIO superIO;
moel@195	47	private readonly string name;
moel@130	48
moel@195	49	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	50	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	51	private readonly List<Sensor> fans = new List<Sensor>();
moel@167	52
moel@130	53
moel@176	54	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	55	Manufacturer manufacturer, Model model, ISettings settings)
moel@130	56	{
moel@176	57	this.mainboard = mainboard;
moel@130	58	this.superIO = superIO;
moel@167	59	this.name = ChipName.GetName(superIO.Chip);
moel@130	60
moel@130	61	List<Voltage> v = new List<Voltage>();
moel@130	62	List<Temperature> t = new List<Temperature>();
moel@130	63	List<Fan> f = new List<Fan>();
moel@130	64
moel@130	65	switch (superIO.Chip) {
moel@130	66	case Chip.IT8712F:
moel@130	67	case Chip.IT8716F:
moel@130	68	case Chip.IT8718F:
moel@177	69	case Chip.IT8720F:
moel@130	70	case Chip.IT8726F:
moel@130	71	switch (manufacturer) {
moel@133	72	case Manufacturer.ASUS:
moel@133	73	switch (model) {
moel@168	74	case Model.Crosshair_III_Formula: // IT8720F
moel@133	75	v.Add(new Voltage("VBat", 8));
moel@133	76	t.Add(new Temperature("CPU", 0));
moel@133	77	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	78	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	79	break;
moel@144	80	case Model.M2N_SLI_DELUXE:
moel@133	81	v.Add(new Voltage("CPU VCore", 0));
moel@133	82	v.Add(new Voltage("+3.3V", 1));
moel@195	83	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	84	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	85	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	86	v.Add(new Voltage("VBat", 8));
moel@133	87	t.Add(new Temperature("CPU", 0));
moel@133	88	t.Add(new Temperature("Motherboard", 1));
moel@133	89	f.Add(new Fan("CPU Fan", 0));
moel@133	90	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	91	f.Add(new Fan("Power Fan", 2));
moel@133	92	break;
moel@168	93	case Model.M4A79XTD_EVO: // IT8720F
moel@195	94	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	95	v.Add(new Voltage("VBat", 8));
moel@144	96	t.Add(new Temperature("CPU", 0));
moel@144	97	t.Add(new Temperature("Motherboard", 1));
moel@144	98	f.Add(new Fan("CPU Fan", 0));
moel@144	99	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	100	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	101	break;
moel@133	102	default:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	105	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	106	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	107	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	108	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	109	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	110	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	111	v.Add(new Voltage("VBat", 8));
moel@133	112	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	113	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	114	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	115	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	116	break;
moel@133	117	}
moel@133	118	break;
moel@130	119	case Manufacturer.DFI:
moel@130	120	switch (model) {
moel@168	121	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	122	v.Add(new Voltage("CPU VCore", 0));
moel@130	123	v.Add(new Voltage("FSB VTT", 1));
moel@130	124	v.Add(new Voltage("+3.3V", 2));
moel@195	125	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	126	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	127	v.Add(new Voltage("NB Core", 5));
moel@130	128	v.Add(new Voltage("VDIMM", 6));
moel@195	129	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	130	v.Add(new Voltage("VBat", 8));
moel@130	131	t.Add(new Temperature("CPU", 0));
moel@130	132	t.Add(new Temperature("System", 1));
moel@130	133	t.Add(new Temperature("Chipset", 2));
moel@130	134	f.Add(new Fan("Fan #1", 0));
moel@130	135	f.Add(new Fan("Fan #2", 1));
moel@130	136	f.Add(new Fan("Fan #3", 2));
moel@130	137	break;
moel@168	138	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	139	v.Add(new Voltage("CPU VCore", 0));
moel@130	140	v.Add(new Voltage("VTT", 1));
moel@130	141	v.Add(new Voltage("+3.3V", 2));
moel@195	142	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	143	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	144	v.Add(new Voltage("CPU PLL", 5));
moel@130	145	v.Add(new Voltage("DRAM", 6));
moel@195	146	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	147	v.Add(new Voltage("VBat", 8));
moel@130	148	t.Add(new Temperature("Chipset", 0));
moel@130	149	t.Add(new Temperature("CPU PWM", 1));
moel@130	150	t.Add(new Temperature("CPU", 2));
moel@130	151	f.Add(new Fan("Fan #1", 0));
moel@130	152	f.Add(new Fan("Fan #2", 1));
moel@130	153	f.Add(new Fan("Fan #3", 2));
moel@130	154	break;
moel@130	155	default:
moel@130	156	v.Add(new Voltage("CPU VCore", 0));
moel@130	157	v.Add(new Voltage("VTT", 1, true));
moel@130	158	v.Add(new Voltage("+3.3V", 2, true));
moel@130	159	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	160	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	161	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	162	v.Add(new Voltage("DRAM", 6, true));
moel@130	163	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	164	v.Add(new Voltage("VBat", 8));
moel@130	165	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	166	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	167	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	168	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	169	break;
moel@130	170	}
moel@130	171	break;
moel@130	172
moel@130	173	case Manufacturer.Gigabyte:
moel@130	174	switch (model) {
moel@168	175	case Model._965P_S3: // IT8718F
moel@130	176	v.Add(new Voltage("CPU VCore", 0));
moel@130	177	v.Add(new Voltage("DRAM", 1));
moel@130	178	v.Add(new Voltage("+3.3V", 2));
moel@195	179	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	180	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	181	v.Add(new Voltage("VBat", 8));
moel@130	182	t.Add(new Temperature("System", 0));
moel@130	183	t.Add(new Temperature("CPU", 1));
moel@130	184	f.Add(new Fan("CPU Fan", 0));
moel@130	185	f.Add(new Fan("System Fan", 1));
moel@130	186	break;
moel@168	187	case Model.EP45_DS3R: // IT8718F
moel@130	188	case Model.EP45_UD3R:
moel@138	189	case Model.X38_DS5:
moel@130	190	v.Add(new Voltage("CPU VCore", 0));
moel@130	191	v.Add(new Voltage("DRAM", 1));
moel@130	192	v.Add(new Voltage("+3.3V", 2));
moel@195	193	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	194	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	195	v.Add(new Voltage("VBat", 8));
moel@130	196	t.Add(new Temperature("System", 0));
moel@130	197	t.Add(new Temperature("CPU", 1));
moel@130	198	f.Add(new Fan("CPU Fan", 0));
moel@130	199	f.Add(new Fan("System Fan #2", 1));
moel@130	200	f.Add(new Fan("Power Fan", 2));
moel@130	201	f.Add(new Fan("System Fan #1", 3));
moel@130	202	break;
moel@168	203	case Model.EX58_EXTREME: // IT8720F
moel@133	204	v.Add(new Voltage("CPU VCore", 0));
moel@133	205	v.Add(new Voltage("DRAM", 1));
moel@195	206	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	207	v.Add(new Voltage("VBat", 8));
moel@133	208	t.Add(new Temperature("System", 0));
moel@133	209	t.Add(new Temperature("CPU", 1));
moel@138	210	t.Add(new Temperature("Northbridge", 2));
moel@133	211	f.Add(new Fan("CPU Fan", 0));
moel@133	212	f.Add(new Fan("System Fan #2", 1));
moel@133	213	f.Add(new Fan("Power Fan", 2));
moel@133	214	f.Add(new Fan("System Fan #1", 3));
moel@133	215	break;
moel@168	216	case Model.P35_DS3: // IT8718F
moel@168	217	case Model.P35_DS3L: // IT8718F
moel@130	218	v.Add(new Voltage("CPU VCore", 0));
moel@130	219	v.Add(new Voltage("DRAM", 1));
moel@130	220	v.Add(new Voltage("+3.3V", 2));
moel@195	221	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	222	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	223	v.Add(new Voltage("VBat", 8));
moel@130	224	t.Add(new Temperature("System", 0));
moel@130	225	t.Add(new Temperature("CPU", 1));
moel@130	226	f.Add(new Fan("CPU Fan", 0));
moel@130	227	f.Add(new Fan("System Fan #1", 1));
moel@130	228	f.Add(new Fan("System Fan #2", 2));
moel@130	229	f.Add(new Fan("Power Fan", 3));
moel@130	230	break;
moel@168	231	case Model.P55_UD4: // IT8720F
moel@168	232	case Model.P55M_UD4: // IT8720F
moel@148	233	v.Add(new Voltage("CPU VCore", 0));
moel@148	234	v.Add(new Voltage("DRAM", 1));
moel@148	235	v.Add(new Voltage("+3.3V", 2));
moel@195	236	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	237	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	238	v.Add(new Voltage("VBat", 8));
moel@148	239	t.Add(new Temperature("System", 0));
moel@148	240	t.Add(new Temperature("CPU", 2));
moel@148	241	f.Add(new Fan("CPU Fan", 0));
moel@148	242	f.Add(new Fan("System Fan #2", 1));
moel@148	243	f.Add(new Fan("Power Fan", 2));
moel@148	244	f.Add(new Fan("System Fan #1", 3));
moel@148	245	break;
moel@168	246	case Model.GA_MA770T_UD3: // IT8720F
moel@154	247	v.Add(new Voltage("CPU VCore", 0));
moel@154	248	v.Add(new Voltage("DRAM", 1));
moel@154	249	v.Add(new Voltage("+3.3V", 2));
moel@195	250	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	251	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	252	v.Add(new Voltage("VBat", 8));
moel@154	253	t.Add(new Temperature("System", 0));
moel@154	254	t.Add(new Temperature("CPU", 1));
moel@154	255	f.Add(new Fan("CPU Fan", 0));
moel@154	256	f.Add(new Fan("System Fan #1", 1));
moel@154	257	f.Add(new Fan("System Fan #2", 2));
moel@154	258	f.Add(new Fan("Power Fan", 3));
moel@154	259	break;
moel@168	260	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	261	v.Add(new Voltage("CPU VCore", 0));
moel@130	262	v.Add(new Voltage("DRAM", 1));
moel@130	263	v.Add(new Voltage("+3.3V", 2));
moel@195	264	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	265	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	266	v.Add(new Voltage("VBat", 8));
moel@130	267	t.Add(new Temperature("System", 0));
moel@130	268	t.Add(new Temperature("CPU", 1));
moel@130	269	f.Add(new Fan("CPU Fan", 0));
moel@130	270	f.Add(new Fan("System Fan", 1));
moel@130	271	f.Add(new Fan("NB Fan", 2));
moel@130	272	break;
moel@168	273	case Model.X58A_UD3R: // IT8720F
moel@138	274	v.Add(new Voltage("CPU VCore", 0));
moel@138	275	v.Add(new Voltage("DRAM", 1));
moel@138	276	v.Add(new Voltage("+3.3V", 2));
moel@195	277	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	278	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	279	v.Add(new Voltage("VBat", 8));
moel@138	280	t.Add(new Temperature("System", 0));
moel@138	281	t.Add(new Temperature("CPU", 1));
moel@138	282	t.Add(new Temperature("Northbridge", 2));
moel@138	283	f.Add(new Fan("CPU Fan", 0));
moel@138	284	f.Add(new Fan("System Fan #2", 1));
moel@138	285	f.Add(new Fan("Power Fan", 2));
moel@138	286	f.Add(new Fan("System Fan #1", 3));
moel@138	287	break;
moel@130	288	default:
moel@130	289	v.Add(new Voltage("CPU VCore", 0));
moel@130	290	v.Add(new Voltage("DRAM", 1, true));
moel@130	291	v.Add(new Voltage("+3.3V", 2, true));
moel@130	292	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	293	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	294	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	295	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	296	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130	297	v.Add(new Voltage("VBat", 8));
moel@130	298	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	299	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	300	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	301	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	302	break;
moel@130	303	}
moel@130	304	break;
moel@130	305
moel@130	306	default:
moel@130	307	v.Add(new Voltage("CPU VCore", 0));
moel@130	308	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	309	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	310	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	311	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	312	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	313	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	314	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	315	v.Add(new Voltage("VBat", 8));
moel@130	316	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	317	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	318	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	319	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	320	break;
moel@130	321	}
moel@130	322	break;
moel@170	323
moel@170	324	case Chip.IT8721F:
moel@177	325	switch (manufacturer) {
moel@177	326	case Manufacturer.ECS:
moel@177	327	switch (model) {
moel@177	328	case Model.A890GXM_A: // IT8721F
moel@177	329	v.Add(new Voltage("CPU VCore", 0));
moel@177	330	v.Add(new Voltage("VDIMM", 1));
moel@177	331	v.Add(new Voltage("NB Voltage", 2));
moel@195	332	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	333	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	334	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	335	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	336	t.Add(new Temperature("CPU", 0));
moel@177	337	t.Add(new Temperature("System", 1));
moel@177	338	t.Add(new Temperature("Northbridge", 2));
moel@177	339	f.Add(new Fan("CPU Fan", 0));
moel@177	340	f.Add(new Fan("System Fan", 1));
moel@177	341	f.Add(new Fan("Power Fan", 2));
moel@177	342	break;
moel@177	343	default:
moel@177	344	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	345	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	346	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	347	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	348	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	349	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	350	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	351	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	352	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	353	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	354	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	355	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	356	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	357	break;
moel@177	358	}
moel@177	359	break;
moel@177	360	default:
moel@177	361	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	362	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	363	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	364	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	365	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	366	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	367	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	368	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	369	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	370	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	371	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	372	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	373	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	374	break;
moel@177	375	}
moel@170	376	break;
moel@130	377
moel@130	378	case Chip.F71858:
moel@195	379	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	380	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	381	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	382	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	383	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	384	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	385	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	386	break;
moel@130	387	case Chip.F71862:
moel@130	388	case Chip.F71869:
moel@130	389	case Chip.F71882:
moel@130	390	case Chip.F71889ED:
moel@130	391	case Chip.F71889F:
moel@132	392	switch (manufacturer) {
moel@132	393	case Manufacturer.EVGA:
moel@132	394	switch (model) {
moel@168	395	case Model.X58_SLI_Classified: // F71882
moel@195	396	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	397	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	398	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	399	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	400	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	401	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	402	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	403	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	404	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	405	t.Add(new Temperature("CPU", 0));
moel@132	406	t.Add(new Temperature("VREG", 1));
moel@132	407	t.Add(new Temperature("System", 2));
moel@132	408	f.Add(new Fan("CPU Fan", 0));
moel@132	409	f.Add(new Fan("Power Fan", 1));
moel@132	410	f.Add(new Fan("Chassis Fan", 2));
moel@132	411	break;
moel@132	412	default:
moel@195	413	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	414	v.Add(new Voltage("CPU VCore", 1));
moel@132	415	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	416	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	417	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	418	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	419	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	420	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	421	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	422	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	423	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	424	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	425	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	426	break;
moel@132	427	}
moel@132	428	break;
moel@132	429	default:
moel@195	430	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	431	v.Add(new Voltage("CPU VCore", 1));
moel@132	432	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	433	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	434	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	435	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	436	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	437	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	438	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	439	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	440	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	441	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	442	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	443	break;
moel@132	444	}
moel@130	445	break;
moel@130	446
moel@220	447	case Chip.W83627EHF:
moel@220	448	switch (manufacturer) {
moel@220	449	case Manufacturer.ASRock:
moel@220	450	switch (model) {
moel@220	451	case Model.AOD790GX_128M: // W83627EHF
moel@220	452	v.Add(new Voltage("CPU VCore", 0));
moel@220	453	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	454	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	455	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	456	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	457	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	458	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	459	t.Add(new Temperature("CPU", 0));
moel@220	460	t.Add(new Temperature("Motherboard", 2));
moel@220	461	f.Add(new Fan("Chassis Fan", 0));
moel@220	462	f.Add(new Fan("CPU Fan", 1));
moel@220	463	f.Add(new Fan("NB Fan", 2));
moel@220	464	f.Add(new Fan("Power Fan", 4));
moel@220	465	break;
moel@220	466	default:
moel@220	467	v.Add(new Voltage("CPU VCore", 0));
moel@220	468	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	469	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	470	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	471	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	472	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	473	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	474	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	475	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	476	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	477	t.Add(new Temperature("CPU", 0));
moel@220	478	t.Add(new Temperature("Auxiliary", 1));
moel@220	479	t.Add(new Temperature("System", 2));
moel@220	480	f.Add(new Fan("System Fan", 0));
moel@220	481	f.Add(new Fan("CPU Fan", 1));
moel@220	482	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	483	f.Add(new Fan("CPU Fan #2", 3));
moel@220	484	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	485	break;
moel@220	486	} break;
moel@220	487	default:
moel@220	488	v.Add(new Voltage("CPU VCore", 0));
moel@220	489	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	490	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	491	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	492	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	493	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	494	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	495	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	496	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	497	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	498	t.Add(new Temperature("CPU", 0));
moel@220	499	t.Add(new Temperature("Auxiliary", 1));
moel@220	500	t.Add(new Temperature("System", 2));
moel@220	501	f.Add(new Fan("System Fan", 0));
moel@220	502	f.Add(new Fan("CPU Fan", 1));
moel@220	503	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	504	f.Add(new Fan("CPU Fan #2", 3));
moel@220	505	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	506	break;
moel@220	507	}
moel@130	508	break;
moel@130	509	case Chip.W83627DHG:
moel@130	510	case Chip.W83627DHGP:
moel@130	511	case Chip.W83667HG:
moel@130	512	case Chip.W83667HGB:
moel@152	513	switch (manufacturer) {
moel@153	514	case Manufacturer.ASRock:
moel@153	515	switch (model) {
moel@168	516	case Model._880GMH_USB3: // W83627DHG-P
moel@153	517	v.Add(new Voltage("CPU VCore", 0));
moel@195	518	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	519	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	520	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	521	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	522	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	523	t.Add(new Temperature("CPU", 0));
moel@153	524	t.Add(new Temperature("Motherboard", 2));
moel@153	525	f.Add(new Fan("Chassis Fan", 0));
moel@153	526	f.Add(new Fan("CPU Fan", 1));
moel@153	527	f.Add(new Fan("Power Fan", 2));
moel@153	528	break;
moel@153	529	default:
moel@153	530	v.Add(new Voltage("CPU VCore", 0));
moel@153	531	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	532	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	533	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	534	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	535	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	536	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	537	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	538	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	539	t.Add(new Temperature("CPU", 0));
moel@153	540	t.Add(new Temperature("Auxiliary", 1));
moel@153	541	t.Add(new Temperature("System", 2));
moel@153	542	f.Add(new Fan("System Fan", 0));
moel@153	543	f.Add(new Fan("CPU Fan", 1));
moel@153	544	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	545	f.Add(new Fan("CPU Fan #2", 3));
moel@153	546	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	547	break;
moel@153	548	}
moel@153	549	break;
moel@152	550	case Manufacturer.ASUS:
moel@152	551	switch (model) {
moel@174	552	case Model.P6X58D_E: // W83667HG
moel@174	553	case Model.Rampage_II_GENE: // W83667HG
moel@152	554	v.Add(new Voltage("CPU VCore", 0));
moel@195	555	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	556	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	557	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	558	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	559	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	560	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	561	t.Add(new Temperature("CPU", 0));
moel@174	562	t.Add(new Temperature("Motherboard", 2));
moel@174	563	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	564	f.Add(new Fan("CPU Fan", 1));
moel@174	565	f.Add(new Fan("Power Fan", 2));
moel@174	566	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	567	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	568	break;
moel@174	569	case Model.Rampage_Extreme: // W83667HG
moel@174	570	v.Add(new Voltage("CPU VCore", 0));
moel@195	571	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	572	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	573	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	574	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	575	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	576	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	577	t.Add(new Temperature("CPU", 0));
moel@152	578	t.Add(new Temperature("Motherboard", 2));
moel@152	579	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	580	f.Add(new Fan("CPU Fan", 1));
moel@153	581	f.Add(new Fan("Power Fan", 2));
moel@152	582	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	583	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	584	break;
moel@152	585	default:
moel@152	586	v.Add(new Voltage("CPU VCore", 0));
moel@152	587	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	588	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	589	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	590	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	591	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	592	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	593	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	594	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	595	t.Add(new Temperature("CPU", 0));
moel@152	596	t.Add(new Temperature("Auxiliary", 1));
moel@152	597	t.Add(new Temperature("System", 2));
moel@153	598	f.Add(new Fan("System Fan", 0));
moel@153	599	f.Add(new Fan("CPU Fan", 1));
moel@153	600	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	601	f.Add(new Fan("CPU Fan #2", 3));
moel@153	602	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	603	break;
moel@152	604	}
moel@152	605	break;
moel@152	606	default:
moel@152	607	v.Add(new Voltage("CPU VCore", 0));
moel@152	608	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	609	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	610	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	611	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	612	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	613	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	614	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	615	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	616	t.Add(new Temperature("CPU", 0));
moel@152	617	t.Add(new Temperature("Auxiliary", 1));
moel@152	618	t.Add(new Temperature("System", 2));
moel@153	619	f.Add(new Fan("System Fan", 0));
moel@153	620	f.Add(new Fan("CPU Fan", 1));
moel@153	621	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	622	f.Add(new Fan("CPU Fan #2", 3));
moel@153	623	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	624	break;
moel@152	625	}
moel@130	626	break;
moel@130	627	case Chip.W83627HF:
moel@130	628	case Chip.W83627THF:
moel@130	629	case Chip.W83687THF:
moel@130	630	v.Add(new Voltage("CPU VCore", 0));
moel@130	631	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	632	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	633	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	634	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	635	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	636	v.Add(new Voltage("VBAT", 6));
moel@130	637	t.Add(new Temperature("CPU", 0));
moel@130	638	t.Add(new Temperature("Auxiliary", 1));
moel@130	639	t.Add(new Temperature("System", 2));
moel@153	640	f.Add(new Fan("System Fan", 0));
moel@153	641	f.Add(new Fan("CPU Fan", 1));
moel@153	642	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	643	break;
moel@130	644	default:
moel@130	645	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	646	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	647	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	648	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	649	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	650	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	651	break;
moel@130	652	}
moel@130	653
moel@195	654	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	655	foreach (Voltage voltage in v)
moel@130	656	if (voltage.Index < superIO.Voltages.Length) {
moel@130	657	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	658	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	659	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	660	formula, voltage.Ri),
moel@130	661	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	662	formula, voltage.Rf),
moel@130	663	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	664	formula, voltage.Vf)
moel@165	665	}, settings);
moel@130	666	voltages.Add(sensor);
moel@130	667	}
moel@130	668
moel@130	669	foreach (Temperature temperature in t)
moel@130	670	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	671	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	672	SensorType.Temperature, this, new [] {
moel@130	673	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	674	}, settings);
moel@130	675	temperatures.Add(sensor);
moel@130	676	}
moel@130	677
moel@130	678	foreach (Fan fan in f)
moel@130	679	if (fan.Index < superIO.Fans.Length) {
moel@134	680	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	681	this, settings);
moel@130	682	fans.Add(sensor);
moel@130	683	}
moel@130	684	}
moel@130	685
moel@130	686	public override Identifier Identifier {
moel@166	687	get {
moel@166	688	return new Identifier("lpc",
moel@166	689	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));
moel@166	690	}
moel@130	691	}
moel@130	692
moel@165	693	public override HardwareType HardwareType {
moel@165	694	get { return HardwareType.SuperIO; }
moel@130	695	}
moel@130	696
moel@176	697	public override IHardware Parent {
moel@176	698	get { return mainboard; }
moel@176	699	}
moel@176	700
moel@130	701	public override string Name {
moel@130	702	get { return name; }
moel@130	703	}
moel@130	704
moel@130	705	public override string GetReport() {
moel@130	706	return superIO.GetReport();
moel@130	707	}
moel@130	708
moel@130	709	public override void Update() {
moel@130	710	superIO.Update();
moel@130	711
moel@130	712	foreach (Sensor sensor in voltages) {
moel@130	713	float? value = superIO.Voltages[sensor.Index];
moel@130	714	if (value.HasValue) {
moel@130	715	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	716	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	717	ActivateSensor(sensor);
moel@130	718	}
moel@130	719	}
moel@130	720
moel@130	721	foreach (Sensor sensor in temperatures) {
moel@130	722	float? value = superIO.Temperatures[sensor.Index];
moel@130	723	if (value.HasValue) {
moel@130	724	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	725	ActivateSensor(sensor);
moel@130	726	}
moel@130	727	}
moel@130	728
moel@130	729	foreach (Sensor sensor in fans) {
moel@130	730	float? value = superIO.Fans[sensor.Index];
moel@130	731	if (value.HasValue) {
moel@130	732	sensor.Value = value;
moel@130	733	if (value.Value > 0)
moel@130	734	ActivateSensor(sensor);
moel@130	735	}
moel@130	736	}
moel@130	737	}
moel@130	738
moel@130	739	private class Voltage {
moel@130	740	public readonly string Name;
moel@130	741	public readonly int Index;
moel@130	742	public readonly float Ri;
moel@130	743	public readonly float Rf;
moel@130	744	public readonly float Vf;
moel@130	745	public readonly bool Hidden;
moel@130	746
moel@202	747	public Voltage(string name, int index) :
moel@202	748	this(name, index, false) { }
moel@202	749
moel@130	750	public Voltage(string name, int index, bool hidden) :
moel@130	751	this(name, index, 0, 1, 0, hidden) { }
moel@202	752
moel@202	753	public Voltage(string name, int index, float ri, float rf) :
moel@202	754	this(name, index, ri, rf, 0, false) { }
moel@202	755
moel@202	756	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	757
moel@195	758	public Voltage(string name, int index,
moel@202	759	float ri, float rf, float vf, bool hidden)
moel@195	760	{
moel@130	761	this.Name = name;
moel@130	762	this.Index = index;
moel@130	763	this.Ri = ri;
moel@130	764	this.Rf = rf;
moel@130	765	this.Vf = vf;
moel@130	766	this.Hidden = hidden;
moel@130	767	}
moel@130	768	}
moel@130	769
moel@130	770	private class Temperature {
moel@130	771	public readonly string Name;
moel@130	772	public readonly int Index;
moel@130	773
moel@167	774	public Temperature(string name, int index) {
moel@130	775	this.Name = name;
moel@130	776	this.Index = index;
moel@130	777	}
moel@130	778	}
moel@130	779
moel@130	780	private class Fan {
moel@130	781	public readonly string Name;
moel@130	782	public readonly int Index;
moel@130	783
moel@130	784	public Fan(string name, int index) {
moel@130	785	this.Name = name;
moel@130	786	this.Index = index;
moel@130	787	}
moel@130	788	}
moel@130	789	}
moel@130	790	}

author	moel.mich
	Mon, 11 Oct 2010 20:37:37 +0000
changeset 220	e51749b206ee
parent 202	551243a66b32
child 221	a950ba30d4dd
permissions	-rw-r--r--