OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@d389607e74ca (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@344	7	Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@166	13	using System.Globalization;
moel@228	14	using System.Threading;
moel@130	15	using OpenHardwareMonitor.Hardware.LPC;
moel@130	16
moel@130	17	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	18	internal class SuperIOHardware : Hardware {
moel@130	19
moel@195	20	private readonly Mainboard mainboard;
moel@195	21	private readonly ISuperIO superIO;
moel@130	22
moel@195	23	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	24	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	25	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	26	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	27
moel@228	28	private delegate float? ReadValueDelegate(int index);
moel@228	29	private delegate void UpdateDelegate();
moel@228	30
moel@228	31	// delegates for mainboard specific sensor reading code
moel@228	32	private readonly ReadValueDelegate readVoltage;
moel@228	33	private readonly ReadValueDelegate readTemperature;
moel@228	34	private readonly ReadValueDelegate readFan;
moel@323	35	private readonly ReadValueDelegate readControl;
moel@228	36
moel@228	37	// delegate for post update mainboard specific code
moel@228	38	private readonly UpdateDelegate postUpdate;
moel@228	39
moel@228	40	// mainboard specific mutex
moel@228	41	private readonly Mutex mutex;
moel@228	42
moel@176	43	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	44	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	45	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	46	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	47	settings)
moel@130	48	{
moel@176	49	this.mainboard = mainboard;
moel@130	50	this.superIO = superIO;
moel@130	51
moel@228	52	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	53	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	54	this.readFan = (index) => superIO.Fans[index];
moel@323	55	this.readControl = (index) => superIO.Controls[index];
moel@228	56
moel@228	57	this.postUpdate = () => { };
moel@228	58
moel@130	59	List<Voltage> v = new List<Voltage>();
moel@130	60	List<Temperature> t = new List<Temperature>();
moel@130	61	List<Fan> f = new List<Fan>();
moel@323	62	List<Ctrl> c = new List<Ctrl>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@130	65	case Chip.IT8712F:
moel@130	66	case Chip.IT8716F:
moel@130	67	case Chip.IT8718F:
moel@177	68	case Chip.IT8720F:
moel@319	69	case Chip.IT8726F:
moel@130	70	switch (manufacturer) {
moel@133	71	case Manufacturer.ASUS:
moel@133	72	switch (model) {
moel@168	73	case Model.Crosshair_III_Formula: // IT8720F
moel@133	74	v.Add(new Voltage("VBat", 8));
moel@133	75	t.Add(new Temperature("CPU", 0));
moel@133	76	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	77	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	78	break;
moel@144	79	case Model.M2N_SLI_DELUXE:
moel@133	80	v.Add(new Voltage("CPU VCore", 0));
moel@133	81	v.Add(new Voltage("+3.3V", 1));
moel@195	82	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	83	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	84	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	85	v.Add(new Voltage("VBat", 8));
moel@133	86	t.Add(new Temperature("CPU", 0));
moel@133	87	t.Add(new Temperature("Motherboard", 1));
moel@133	88	f.Add(new Fan("CPU Fan", 0));
moel@133	89	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	90	f.Add(new Fan("Power Fan", 2));
moel@133	91	break;
moel@168	92	case Model.M4A79XTD_EVO: // IT8720F
moel@195	93	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	94	v.Add(new Voltage("VBat", 8));
moel@144	95	t.Add(new Temperature("CPU", 0));
moel@144	96	t.Add(new Temperature("Motherboard", 1));
moel@144	97	f.Add(new Fan("CPU Fan", 0));
moel@144	98	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	99	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	100	break;
moel@133	101	default:
moel@133	102	v.Add(new Voltage("CPU VCore", 0));
moel@133	103	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	104	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	105	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	106	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	107	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	108	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	109	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	110	v.Add(new Voltage("VBat", 8));
moel@133	111	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	112	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	113	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	114	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	115	break;
moel@133	116	}
moel@133	117	break;
moel@221	118
moel@221	119	case Manufacturer.ASRock:
moel@221	120	switch (model) {
moel@221	121	case Model.P55_Deluxe: // IT8720F
moel@228	122
moel@221	123	v.Add(new Voltage("CPU VCore", 0));
moel@221	124	v.Add(new Voltage("+3.3V", 2));
moel@221	125	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	126	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	127	v.Add(new Voltage("VBat", 8));
moel@221	128	t.Add(new Temperature("CPU", 0));
moel@221	129	t.Add(new Temperature("Motherboard", 1));
moel@221	130	f.Add(new Fan("CPU Fan", 0));
moel@221	131	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	132
moel@228	133	// this mutex is also used by the official ASRock tool
moel@228	134	mutex = new Mutex(false, "ASRockOCMark");
moel@228	135
moel@228	136	bool exclusiveAccess = false;
moel@228	137	try {
moel@228	138	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	139	} catch (AbandonedMutexException) { }
moel@228	140	catch (InvalidOperationException) { }
moel@228	141
moel@228	142	// only read additional fans if we get exclusive access
moel@228	143	if (exclusiveAccess) {
moel@228	144
moel@228	145	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	146	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	147	f.Add(new Fan("Power Fan", 4));
moel@228	148
moel@228	149	readFan = (index) => {
moel@228	150	if (index < 2) {
moel@228	151	return superIO.Fans[index];
moel@228	152	} else {
moel@228	153	// get GPIO 80-87
moel@228	154	byte? gpio = superIO.ReadGPIO(7);
moel@228	155	if (!gpio.HasValue)
moel@228	156	return null;
moel@228	157
moel@228	158	// read the last 3 fans based on GPIO 83-85
moel@228	159	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	160	return (((gpio.Value >> 3) & 0x07) ==
moel@228	161	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	162	}
moel@228	163	};
moel@228	164
moel@228	165	int fanIndex = 0;
moel@228	166	postUpdate = () => {
moel@228	167	// get GPIO 80-87
moel@228	168	byte? gpio = superIO.ReadGPIO(7);
moel@228	169	if (!gpio.HasValue)
moel@228	170	return;
moel@228	171
moel@228	172	// prepare the GPIO 83-85 for the next update
moel@228	173	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	174	superIO.WriteGPIO(7,
moel@228	175	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	176	fanIndex = (fanIndex + 1) % 3;
moel@228	177	};
moel@228	178	}
moel@228	179
moel@221	180	break;
moel@221	181	default:
moel@221	182	v.Add(new Voltage("CPU VCore", 0));
moel@221	183	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	184	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	185	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	186	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	187	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	188	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	189	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	190	v.Add(new Voltage("VBat", 8));
moel@221	191	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	192	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	193	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	194	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	195	break;
moel@221	196	};
moel@221	197	break;
moel@221	198
moel@130	199	case Manufacturer.DFI:
moel@130	200	switch (model) {
moel@168	201	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	202	v.Add(new Voltage("CPU VCore", 0));
moel@130	203	v.Add(new Voltage("FSB VTT", 1));
moel@130	204	v.Add(new Voltage("+3.3V", 2));
moel@195	205	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	206	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	207	v.Add(new Voltage("NB Core", 5));
moel@130	208	v.Add(new Voltage("VDIMM", 6));
moel@195	209	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	210	v.Add(new Voltage("VBat", 8));
moel@130	211	t.Add(new Temperature("CPU", 0));
moel@130	212	t.Add(new Temperature("System", 1));
moel@130	213	t.Add(new Temperature("Chipset", 2));
moel@130	214	f.Add(new Fan("Fan #1", 0));
moel@130	215	f.Add(new Fan("Fan #2", 1));
moel@130	216	f.Add(new Fan("Fan #3", 2));
moel@130	217	break;
moel@168	218	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	219	v.Add(new Voltage("CPU VCore", 0));
moel@130	220	v.Add(new Voltage("VTT", 1));
moel@130	221	v.Add(new Voltage("+3.3V", 2));
moel@195	222	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	223	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	224	v.Add(new Voltage("CPU PLL", 5));
moel@130	225	v.Add(new Voltage("DRAM", 6));
moel@195	226	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	227	v.Add(new Voltage("VBat", 8));
moel@130	228	t.Add(new Temperature("Chipset", 0));
moel@130	229	t.Add(new Temperature("CPU PWM", 1));
moel@130	230	t.Add(new Temperature("CPU", 2));
moel@130	231	f.Add(new Fan("Fan #1", 0));
moel@130	232	f.Add(new Fan("Fan #2", 1));
moel@130	233	f.Add(new Fan("Fan #3", 2));
moel@130	234	break;
moel@130	235	default:
moel@130	236	v.Add(new Voltage("CPU VCore", 0));
moel@130	237	v.Add(new Voltage("VTT", 1, true));
moel@130	238	v.Add(new Voltage("+3.3V", 2, true));
moel@130	239	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	240	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	241	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	242	v.Add(new Voltage("DRAM", 6, true));
moel@130	243	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	244	v.Add(new Voltage("VBat", 8));
moel@130	245	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	246	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	247	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	248	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	249	break;
moel@130	250	}
moel@130	251	break;
moel@130	252
moel@130	253	case Manufacturer.Gigabyte:
moel@130	254	switch (model) {
moel@168	255	case Model._965P_S3: // IT8718F
moel@130	256	v.Add(new Voltage("CPU VCore", 0));
moel@130	257	v.Add(new Voltage("DRAM", 1));
moel@130	258	v.Add(new Voltage("+3.3V", 2));
moel@195	259	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	260	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	261	v.Add(new Voltage("VBat", 8));
moel@130	262	t.Add(new Temperature("System", 0));
moel@130	263	t.Add(new Temperature("CPU", 1));
moel@130	264	f.Add(new Fan("CPU Fan", 0));
moel@130	265	f.Add(new Fan("System Fan", 1));
moel@130	266	break;
moel@168	267	case Model.EP45_DS3R: // IT8718F
moel@130	268	case Model.EP45_UD3R:
moel@138	269	case Model.X38_DS5:
moel@130	270	v.Add(new Voltage("CPU VCore", 0));
moel@130	271	v.Add(new Voltage("DRAM", 1));
moel@130	272	v.Add(new Voltage("+3.3V", 2));
moel@195	273	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	274	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	275	v.Add(new Voltage("VBat", 8));
moel@130	276	t.Add(new Temperature("System", 0));
moel@130	277	t.Add(new Temperature("CPU", 1));
moel@130	278	f.Add(new Fan("CPU Fan", 0));
moel@130	279	f.Add(new Fan("System Fan #2", 1));
moel@130	280	f.Add(new Fan("Power Fan", 2));
moel@130	281	f.Add(new Fan("System Fan #1", 3));
moel@130	282	break;
moel@168	283	case Model.EX58_EXTREME: // IT8720F
moel@133	284	v.Add(new Voltage("CPU VCore", 0));
moel@133	285	v.Add(new Voltage("DRAM", 1));
moel@195	286	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	287	v.Add(new Voltage("VBat", 8));
moel@133	288	t.Add(new Temperature("System", 0));
moel@133	289	t.Add(new Temperature("CPU", 1));
moel@138	290	t.Add(new Temperature("Northbridge", 2));
moel@133	291	f.Add(new Fan("CPU Fan", 0));
moel@133	292	f.Add(new Fan("System Fan #2", 1));
moel@133	293	f.Add(new Fan("Power Fan", 2));
moel@133	294	f.Add(new Fan("System Fan #1", 3));
moel@133	295	break;
moel@168	296	case Model.P35_DS3: // IT8718F
moel@168	297	case Model.P35_DS3L: // IT8718F
moel@130	298	v.Add(new Voltage("CPU VCore", 0));
moel@130	299	v.Add(new Voltage("DRAM", 1));
moel@130	300	v.Add(new Voltage("+3.3V", 2));
moel@195	301	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	302	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	303	v.Add(new Voltage("VBat", 8));
moel@130	304	t.Add(new Temperature("System", 0));
moel@130	305	t.Add(new Temperature("CPU", 1));
moel@130	306	f.Add(new Fan("CPU Fan", 0));
moel@130	307	f.Add(new Fan("System Fan #1", 1));
moel@130	308	f.Add(new Fan("System Fan #2", 2));
moel@130	309	f.Add(new Fan("Power Fan", 3));
moel@130	310	break;
moel@168	311	case Model.P55_UD4: // IT8720F
moel@168	312	case Model.P55M_UD4: // IT8720F
moel@148	313	v.Add(new Voltage("CPU VCore", 0));
moel@148	314	v.Add(new Voltage("DRAM", 1));
moel@148	315	v.Add(new Voltage("+3.3V", 2));
moel@195	316	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	317	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	318	v.Add(new Voltage("VBat", 8));
moel@148	319	t.Add(new Temperature("System", 0));
moel@148	320	t.Add(new Temperature("CPU", 2));
moel@148	321	f.Add(new Fan("CPU Fan", 0));
moel@148	322	f.Add(new Fan("System Fan #2", 1));
moel@148	323	f.Add(new Fan("Power Fan", 2));
moel@148	324	f.Add(new Fan("System Fan #1", 3));
moel@148	325	break;
moel@168	326	case Model.GA_MA770T_UD3: // IT8720F
moel@154	327	v.Add(new Voltage("CPU VCore", 0));
moel@154	328	v.Add(new Voltage("DRAM", 1));
moel@154	329	v.Add(new Voltage("+3.3V", 2));
moel@195	330	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	331	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	332	v.Add(new Voltage("VBat", 8));
moel@154	333	t.Add(new Temperature("System", 0));
moel@154	334	t.Add(new Temperature("CPU", 1));
moel@154	335	f.Add(new Fan("CPU Fan", 0));
moel@154	336	f.Add(new Fan("System Fan #1", 1));
moel@154	337	f.Add(new Fan("System Fan #2", 2));
moel@154	338	f.Add(new Fan("Power Fan", 3));
moel@154	339	break;
moel@168	340	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	341	v.Add(new Voltage("CPU VCore", 0));
moel@130	342	v.Add(new Voltage("DRAM", 1));
moel@130	343	v.Add(new Voltage("+3.3V", 2));
moel@195	344	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	345	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	346	v.Add(new Voltage("VBat", 8));
moel@130	347	t.Add(new Temperature("System", 0));
moel@130	348	t.Add(new Temperature("CPU", 1));
moel@130	349	f.Add(new Fan("CPU Fan", 0));
moel@130	350	f.Add(new Fan("System Fan", 1));
moel@130	351	f.Add(new Fan("NB Fan", 2));
moel@130	352	break;
moel@168	353	case Model.X58A_UD3R: // IT8720F
moel@138	354	v.Add(new Voltage("CPU VCore", 0));
moel@138	355	v.Add(new Voltage("DRAM", 1));
moel@138	356	v.Add(new Voltage("+3.3V", 2));
moel@195	357	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	358	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	359	v.Add(new Voltage("VBat", 8));
moel@138	360	t.Add(new Temperature("System", 0));
moel@138	361	t.Add(new Temperature("CPU", 1));
moel@138	362	t.Add(new Temperature("Northbridge", 2));
moel@138	363	f.Add(new Fan("CPU Fan", 0));
moel@138	364	f.Add(new Fan("System Fan #2", 1));
moel@138	365	f.Add(new Fan("Power Fan", 2));
moel@138	366	f.Add(new Fan("System Fan #1", 3));
moel@138	367	break;
moel@130	368	default:
moel@130	369	v.Add(new Voltage("CPU VCore", 0));
moel@130	370	v.Add(new Voltage("DRAM", 1, true));
moel@130	371	v.Add(new Voltage("+3.3V", 2, true));
moel@130	372	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	373	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	374	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	375	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	376	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	377	v.Add(new Voltage("VBat", 8));
moel@130	378	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	379	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	380	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	381	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	382	break;
moel@130	383	}
moel@130	384	break;
moel@130	385
moel@130	386	default:
moel@130	387	v.Add(new Voltage("CPU VCore", 0));
moel@130	388	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	389	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	390	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	391	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	392	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	393	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	394	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	395	v.Add(new Voltage("VBat", 8));
moel@130	396	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	397	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	398	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	399	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	400	break;
moel@130	401	}
moel@130	402	break;
moel@170	403
moel@170	404	case Chip.IT8721F:
moel@277	405	case Chip.IT8728F:
moel@341	406	case Chip.IT8771E:
moel@319	407	case Chip.IT8772E:
moel@177	408	switch (manufacturer) {
moel@177	409	case Manufacturer.ECS:
moel@177	410	switch (model) {
moel@177	411	case Model.A890GXM_A: // IT8721F
moel@177	412	v.Add(new Voltage("CPU VCore", 0));
moel@177	413	v.Add(new Voltage("VDIMM", 1));
moel@177	414	v.Add(new Voltage("NB Voltage", 2));
moel@195	415	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	416	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	417	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	418	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	419	t.Add(new Temperature("CPU", 0));
moel@177	420	t.Add(new Temperature("System", 1));
moel@177	421	t.Add(new Temperature("Northbridge", 2));
moel@177	422	f.Add(new Fan("CPU Fan", 0));
moel@177	423	f.Add(new Fan("System Fan", 1));
moel@177	424	f.Add(new Fan("Power Fan", 2));
moel@177	425	break;
moel@177	426	default:
moel@177	427	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	428	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	429	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	430	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	431	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	432	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	433	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	434	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	435	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	436	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	437	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	438	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	439	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	440	break;
moel@177	441	}
moel@177	442	break;
moel@278	443	case Manufacturer.Gigabyte:
moel@278	444	switch (model) {
moel@290	445	case Model.P67A_UD4_B3: // IT8728F
moel@278	446	v.Add(new Voltage("+12V", 0, 100, 10));
moel@278	447	v.Add(new Voltage("+5V", 1, 15, 10));
moel@278	448	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	449	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	450	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	451	v.Add(new Voltage("CPU VCore", 5));
moel@278	452	v.Add(new Voltage("DRAM", 6));
moel@278	453	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	454	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	455	t.Add(new Temperature("System", 0));
moel@278	456	t.Add(new Temperature("CPU", 2));
moel@278	457	f.Add(new Fan("CPU Fan", 0));
moel@278	458	f.Add(new Fan("System Fan #2", 1));
moel@278	459	f.Add(new Fan("Power Fan", 2));
moel@278	460	f.Add(new Fan("System Fan #1", 3));
moel@278	461	break;
moel@290	462	case Model.H67A_UD3H_B3: // IT8728F
moel@290	463	v.Add(new Voltage("VTT", 0));
moel@290	464	v.Add(new Voltage("+5V", 1, 15, 10));
moel@290	465	v.Add(new Voltage("+12V", 2, 68, 22));
moel@290	466	v.Add(new Voltage("Voltage #4", 3, true));
moel@290	467	v.Add(new Voltage("Voltage #5", 4, true));
moel@290	468	v.Add(new Voltage("CPU VCore", 5));
moel@290	469	v.Add(new Voltage("DRAM", 6));
moel@290	470	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290	471	v.Add(new Voltage("VBat", 8, 10, 10));
moel@290	472	t.Add(new Temperature("System", 0));
moel@290	473	t.Add(new Temperature("CPU", 2));
moel@290	474	f.Add(new Fan("CPU Fan", 0));
moel@290	475	f.Add(new Fan("System Fan #1", 1));
moel@290	476	f.Add(new Fan("Power Fan", 2));
moel@290	477	f.Add(new Fan("System Fan #2", 3));
moel@290	478	break;
moel@305	479	case Model.Z68X_UD7_B3: // IT8728F
moel@305	480	v.Add(new Voltage("VTT", 0));
moel@307	481	v.Add(new Voltage("+3.3V", 1, 13.3f, 20.5f));
moel@305	482	v.Add(new Voltage("+12V", 2, 68, 22));
moel@307	483	v.Add(new Voltage("+5V", 3, 14.3f, 20));
moel@305	484	v.Add(new Voltage("CPU VCore", 5));
moel@305	485	v.Add(new Voltage("DRAM", 6));
moel@305	486	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305	487	v.Add(new Voltage("VBat", 8, 10, 10));
moel@305	488	t.Add(new Temperature("System", 0));
moel@305	489	t.Add(new Temperature("CPU", 1));
moel@305	490	t.Add(new Temperature("System 3", 2));
moel@305	491	f.Add(new Fan("CPU Fan", 0));
moel@305	492	f.Add(new Fan("Power Fan", 1));
moel@305	493	f.Add(new Fan("System Fan #1", 2));
moel@305	494	f.Add(new Fan("System Fan #2", 3));
moel@305	495	f.Add(new Fan("System Fan #3", 4));
moel@305	496	break;
moel@278	497	default:
moel@278	498	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	499	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	500	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	501	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	502	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	503	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	504	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	505	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	506	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	507	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	508	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	509	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	510	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	511	break;
moel@278	512	}
moel@278	513	break;
moel@320	514	case Manufacturer.Shuttle:
moel@320	515	switch (model) {
moel@320	516	case Model.FH67: // IT8772E
moel@320	517	v.Add(new Voltage("CPU VCore", 0));
moel@320	518	v.Add(new Voltage("DRAM", 1));
moel@320	519	v.Add(new Voltage("PCH VCCIO", 2));
moel@320	520	v.Add(new Voltage("CPU VCCIO", 3));
moel@320	521	v.Add(new Voltage("Graphic Voltage", 4));
moel@320	522	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320	523	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	524	t.Add(new Temperature("System", 0));
moel@320	525	t.Add(new Temperature("CPU", 1));
moel@320	526	f.Add(new Fan("Fan #1", 0));
moel@320	527	f.Add(new Fan("CPU Fan", 1));
moel@320	528	break;
moel@320	529	default:
moel@320	530	v.Add(new Voltage("Voltage #1", 0, true));
moel@320	531	v.Add(new Voltage("Voltage #2", 1, true));
moel@320	532	v.Add(new Voltage("Voltage #3", 2, true));
moel@320	533	v.Add(new Voltage("Voltage #4", 3, true));
moel@320	534	v.Add(new Voltage("Voltage #5", 4, true));
moel@320	535	v.Add(new Voltage("Voltage #6", 5, true));
moel@320	536	v.Add(new Voltage("Voltage #7", 6, true));
moel@320	537	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320	538	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	539	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320	540	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320	541	for (int i = 0; i < superIO.Fans.Length; i++)
moel@320	542	f.Add(new Fan("Fan #" + (i + 1), i));
moel@320	543	break;
moel@320	544	}
moel@320	545	break;
moel@177	546	default:
moel@177	547	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	548	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	549	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	550	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	551	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	552	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	553	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	554	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	555	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	556	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	557	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	558	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	559	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	560	break;
moel@177	561	}
moel@170	562	break;
moel@130	563
moel@130	564	case Chip.F71858:
moel@195	565	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	566	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	567	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	568	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	569	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	570	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	571	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	572	break;
moel@130	573	case Chip.F71862:
moel@130	574	case Chip.F71869:
moel@130	575	case Chip.F71882:
moel@296	576	case Chip.F71889AD:
moel@130	577	case Chip.F71889ED:
moel@130	578	case Chip.F71889F:
moel@132	579	switch (manufacturer) {
moel@132	580	case Manufacturer.EVGA:
moel@132	581	switch (model) {
moel@168	582	case Model.X58_SLI_Classified: // F71882
moel@195	583	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	584	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	585	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	586	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	587	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	588	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	589	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	590	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	591	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	592	t.Add(new Temperature("CPU", 0));
moel@132	593	t.Add(new Temperature("VREG", 1));
moel@132	594	t.Add(new Temperature("System", 2));
moel@132	595	f.Add(new Fan("CPU Fan", 0));
moel@132	596	f.Add(new Fan("Power Fan", 1));
moel@132	597	f.Add(new Fan("Chassis Fan", 2));
moel@132	598	break;
moel@132	599	default:
moel@195	600	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	601	v.Add(new Voltage("CPU VCore", 1));
moel@132	602	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	603	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	604	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	605	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	606	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	607	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	608	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	609	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	610	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	611	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	612	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	613	break;
moel@132	614	}
moel@132	615	break;
moel@132	616	default:
moel@195	617	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	618	v.Add(new Voltage("CPU VCore", 1));
moel@132	619	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	620	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	621	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	622	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	623	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	624	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	625	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	626	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	627	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	628	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	629	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	630	break;
moel@132	631	}
moel@130	632	break;
moel@130	633
moel@220	634	case Chip.W83627EHF:
moel@220	635	switch (manufacturer) {
moel@220	636	case Manufacturer.ASRock:
moel@220	637	switch (model) {
moel@220	638	case Model.AOD790GX_128M: // W83627EHF
moel@220	639	v.Add(new Voltage("CPU VCore", 0));
moel@220	640	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	641	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	642	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	643	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	644	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	645	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	646	t.Add(new Temperature("CPU", 0));
moel@220	647	t.Add(new Temperature("Motherboard", 2));
moel@221	648	f.Add(new Fan("CPU Fan", 0));
moel@221	649	f.Add(new Fan("Chassis Fan", 1));
moel@220	650	break;
moel@220	651	default:
moel@220	652	v.Add(new Voltage("CPU VCore", 0));
moel@220	653	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	654	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	655	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	656	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	657	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	658	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	659	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	660	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	661	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	662	t.Add(new Temperature("CPU", 0));
moel@220	663	t.Add(new Temperature("Auxiliary", 1));
moel@220	664	t.Add(new Temperature("System", 2));
moel@220	665	f.Add(new Fan("System Fan", 0));
moel@220	666	f.Add(new Fan("CPU Fan", 1));
moel@220	667	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	668	f.Add(new Fan("CPU Fan #2", 3));
moel@220	669	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	670	break;
moel@220	671	} break;
moel@220	672	default:
moel@220	673	v.Add(new Voltage("CPU VCore", 0));
moel@220	674	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	675	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	676	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	677	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	678	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	679	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	680	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	681	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	682	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	683	t.Add(new Temperature("CPU", 0));
moel@220	684	t.Add(new Temperature("Auxiliary", 1));
moel@220	685	t.Add(new Temperature("System", 2));
moel@220	686	f.Add(new Fan("System Fan", 0));
moel@220	687	f.Add(new Fan("CPU Fan", 1));
moel@220	688	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	689	f.Add(new Fan("CPU Fan #2", 3));
moel@220	690	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	691	break;
moel@220	692	}
moel@130	693	break;
moel@130	694	case Chip.W83627DHG:
moel@130	695	case Chip.W83627DHGP:
moel@130	696	case Chip.W83667HG:
moel@130	697	case Chip.W83667HGB:
moel@152	698	switch (manufacturer) {
moel@153	699	case Manufacturer.ASRock:
moel@153	700	switch (model) {
moel@168	701	case Model._880GMH_USB3: // W83627DHG-P
moel@153	702	v.Add(new Voltage("CPU VCore", 0));
moel@195	703	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	704	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	705	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	706	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	707	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	708	t.Add(new Temperature("CPU", 0));
moel@153	709	t.Add(new Temperature("Motherboard", 2));
moel@153	710	f.Add(new Fan("Chassis Fan", 0));
moel@153	711	f.Add(new Fan("CPU Fan", 1));
moel@153	712	f.Add(new Fan("Power Fan", 2));
moel@153	713	break;
moel@153	714	default:
moel@153	715	v.Add(new Voltage("CPU VCore", 0));
moel@153	716	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	717	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	718	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	719	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	720	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	721	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	722	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	723	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	724	t.Add(new Temperature("CPU", 0));
moel@153	725	t.Add(new Temperature("Auxiliary", 1));
moel@153	726	t.Add(new Temperature("System", 2));
moel@153	727	f.Add(new Fan("System Fan", 0));
moel@153	728	f.Add(new Fan("CPU Fan", 1));
moel@153	729	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	730	f.Add(new Fan("CPU Fan #2", 3));
moel@153	731	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	732	break;
moel@153	733	}
moel@153	734	break;
moel@152	735	case Manufacturer.ASUS:
moel@152	736	switch (model) {
moel@336	737	case Model.P6T: // W83667HG
moel@174	738	case Model.P6X58D_E: // W83667HG
moel@174	739	case Model.Rampage_II_GENE: // W83667HG
moel@152	740	v.Add(new Voltage("CPU VCore", 0));
moel@195	741	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	742	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	743	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	744	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	745	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	746	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	747	t.Add(new Temperature("CPU", 0));
moel@174	748	t.Add(new Temperature("Motherboard", 2));
moel@174	749	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	750	f.Add(new Fan("CPU Fan", 1));
moel@174	751	f.Add(new Fan("Power Fan", 2));
moel@174	752	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	753	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	754	break;
moel@174	755	case Model.Rampage_Extreme: // W83667HG
moel@174	756	v.Add(new Voltage("CPU VCore", 0));
moel@195	757	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	758	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	759	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	760	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	761	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	762	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	763	t.Add(new Temperature("CPU", 0));
moel@152	764	t.Add(new Temperature("Motherboard", 2));
moel@152	765	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	766	f.Add(new Fan("CPU Fan", 1));
moel@153	767	f.Add(new Fan("Power Fan", 2));
moel@152	768	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	769	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	770	break;
moel@152	771	default:
moel@152	772	v.Add(new Voltage("CPU VCore", 0));
moel@152	773	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	774	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	775	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	776	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	777	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	778	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	779	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	780	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	781	t.Add(new Temperature("CPU", 0));
moel@152	782	t.Add(new Temperature("Auxiliary", 1));
moel@152	783	t.Add(new Temperature("System", 2));
moel@153	784	f.Add(new Fan("System Fan", 0));
moel@153	785	f.Add(new Fan("CPU Fan", 1));
moel@153	786	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	787	f.Add(new Fan("CPU Fan #2", 3));
moel@153	788	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	789	break;
moel@152	790	}
moel@152	791	break;
moel@152	792	default:
moel@152	793	v.Add(new Voltage("CPU VCore", 0));
moel@152	794	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	795	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	796	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	797	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	798	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	799	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	800	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	801	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	802	t.Add(new Temperature("CPU", 0));
moel@152	803	t.Add(new Temperature("Auxiliary", 1));
moel@152	804	t.Add(new Temperature("System", 2));
moel@153	805	f.Add(new Fan("System Fan", 0));
moel@153	806	f.Add(new Fan("CPU Fan", 1));
moel@153	807	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	808	f.Add(new Fan("CPU Fan #2", 3));
moel@153	809	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	810	break;
moel@152	811	}
moel@130	812	break;
moel@130	813	case Chip.W83627HF:
moel@130	814	case Chip.W83627THF:
moel@130	815	case Chip.W83687THF:
moel@130	816	v.Add(new Voltage("CPU VCore", 0));
moel@130	817	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	818	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	819	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	820	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	821	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	822	v.Add(new Voltage("VBAT", 6));
moel@130	823	t.Add(new Temperature("CPU", 0));
moel@130	824	t.Add(new Temperature("Auxiliary", 1));
moel@130	825	t.Add(new Temperature("System", 2));
moel@153	826	f.Add(new Fan("System Fan", 0));
moel@153	827	f.Add(new Fan("CPU Fan", 1));
moel@153	828	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	829	break;
moel@245	830	case Chip.NCT6771F:
moel@265	831	case Chip.NCT6776F:
moel@265	832	switch (manufacturer) {
moel@265	833	case Manufacturer.ASUS:
moel@265	834	switch (model) {
moel@312	835	case Model.P8P67: // NCT6776F
moel@311	836	case Model.P8P67_EVO: // NCT6776F
moel@265	837	case Model.P8P67_PRO: // NCT6776F
moel@265	838	v.Add(new Voltage("CPU VCore", 0));
moel@310	839	v.Add(new Voltage("+12V", 1, 11, 1));
moel@310	840	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	841	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310	842	v.Add(new Voltage("+5V", 4, 12, 3));
moel@310	843	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265	844	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310	845	t.Add(new Temperature("CPU", 0));
moel@276	846	t.Add(new Temperature("Auxiliary", 2));
moel@310	847	t.Add(new Temperature("Motherboard", 3));
moel@310	848	f.Add(new Fan("Chassis Fan #1", 0));
moel@265	849	f.Add(new Fan("CPU Fan", 1));
moel@310	850	f.Add(new Fan("Power Fan", 2));
moel@310	851	f.Add(new Fan("Chassis Fan #2", 3));
moel@323	852	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323	853	c.Add(new Ctrl("CPU Fan", 1));
moel@323	854	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265	855	break;
moel@276	856	case Model.P8P67_M_PRO: // NCT6776F
moel@276	857	v.Add(new Voltage("CPU VCore", 0));
moel@276	858	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	859	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	860	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276	861	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	862	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	863	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	864	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	865	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	866	t.Add(new Temperature("CPU", 0));
moel@276	867	t.Add(new Temperature("Motherboard", 3));
moel@276	868	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	869	f.Add(new Fan("CPU Fan", 1));
moel@276	870	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	871	f.Add(new Fan("Power Fan", 3));
moel@276	872	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	873	break;
moel@337	874	case Model.P8Z68_V_PRO: // NCT6776F
moel@337	875	v.Add(new Voltage("CPU VCore", 0));
moel@337	876	v.Add(new Voltage("+12V", 1, 11, 1));
moel@337	877	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337	878	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337	879	v.Add(new Voltage("+5V", 4, 12, 3));
moel@337	880	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337	881	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337	882	t.Add(new Temperature("CPU", 0));
moel@337	883	t.Add(new Temperature("Auxiliary", 2));
moel@337	884	t.Add(new Temperature("Motherboard", 3));
moel@337	885	for (int i = 0; i < superIO.Fans.Length; i++)
moel@337	886	f.Add(new Fan("Fan #" + (i + 1), i));
moel@337	887	for (int i = 0; i < superIO.Controls.Length; i++)
moel@337	888	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337	889	break;
moel@332	890	case Model.P9X79: // NCT6776F
moel@332	891	v.Add(new Voltage("CPU VCore", 0));
moel@332	892	v.Add(new Voltage("+12V", 1, 11, 1));
moel@332	893	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332	894	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332	895	v.Add(new Voltage("+5V", 4, 12, 3));
moel@332	896	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332	897	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332	898	t.Add(new Temperature("CPU", 0));
moel@332	899	t.Add(new Temperature("Motherboard", 3));
moel@332	900	for (int i = 0; i < superIO.Fans.Length; i++)
moel@332	901	f.Add(new Fan("Fan #" + (i + 1), i));
moel@332	902	break;
moel@265	903	default:
moel@265	904	v.Add(new Voltage("CPU VCore", 0));
moel@265	905	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	906	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	907	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	908	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	909	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	910	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	911	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	912	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	913	t.Add(new Temperature("CPU", 0));
moel@276	914	t.Add(new Temperature("CPU", 1));
moel@276	915	t.Add(new Temperature("Auxiliary", 2));
moel@276	916	t.Add(new Temperature("System", 3));
moel@265	917	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	918	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	919	break;
moel@265	920	}
moel@265	921	break;
moel@265	922	default:
moel@265	923	v.Add(new Voltage("CPU VCore", 0));
moel@265	924	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	925	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	926	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	927	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	928	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	929	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	930	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	931	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@265	932	t.Add(new Temperature("CPU", 0));
moel@276	933	t.Add(new Temperature("CPU", 1));
moel@276	934	t.Add(new Temperature("Auxiliary", 2));
moel@276	935	t.Add(new Temperature("System", 3));
moel@265	936	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	937	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	938	break;
moel@265	939	}
moel@245	940	break;
moel@130	941	default:
moel@130	942	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	943	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	944	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	945	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	946	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	947	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	948	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	949	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	950	break;
moel@130	951	}
moel@130	952
moel@195	953	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	954	foreach (Voltage voltage in v)
moel@130	955	if (voltage.Index < superIO.Voltages.Length) {
moel@130	956	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	957	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	958	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	959	formula, voltage.Ri),
moel@130	960	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	961	formula, voltage.Rf),
moel@130	962	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	963	formula, voltage.Vf)
moel@165	964	}, settings);
moel@130	965	voltages.Add(sensor);
moel@130	966	}
moel@130	967
moel@130	968	foreach (Temperature temperature in t)
moel@130	969	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	970	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	971	SensorType.Temperature, this, new [] {
moel@130	972	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	973	}, settings);
moel@130	974	temperatures.Add(sensor);
moel@130	975	}
moel@130	976
moel@130	977	foreach (Fan fan in f)
moel@130	978	if (fan.Index < superIO.Fans.Length) {
moel@134	979	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	980	this, settings);
moel@130	981	fans.Add(sensor);
moel@130	982	}
moel@323	983
moel@323	984	foreach (Ctrl ctrl in c) {
moel@323	985	int index = ctrl.Index;
moel@323	986	if (index < superIO.Controls.Length) {
moel@323	987	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323	988	this, settings);
moel@323	989	Control control = new Control(sensor, settings, 0, 100);
moel@323	990	control.ControlModeChanged += (cc) => {
moel@323	991	if (cc.ControlMode == ControlMode.Default) {
moel@323	992	superIO.SetControl(index, null);
moel@323	993	} else {
moel@323	994	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	995	}
moel@323	996	};
moel@323	997	control.SoftwareControlValueChanged += (cc) => {
moel@323	998	if (cc.ControlMode == ControlMode.Software)
moel@323	999	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1000	};
moel@323	1001	if (control.ControlMode == ControlMode.Software)
moel@323	1002	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323	1003	sensor.Control = control;
moel@323	1004	controls.Add(sensor);
moel@323	1005	}
moel@323	1006	}
moel@130	1007	}
moel@130	1008
moel@165	1009	public override HardwareType HardwareType {
moel@165	1010	get { return HardwareType.SuperIO; }
moel@130	1011	}
moel@130	1012
moel@176	1013	public override IHardware Parent {
moel@176	1014	get { return mainboard; }
moel@176	1015	}
moel@176	1016
moel@130	1017
moel@130	1018	public override string GetReport() {
moel@130	1019	return superIO.GetReport();
moel@130	1020	}
moel@130	1021
moel@130	1022	public override void Update() {
moel@130	1023	superIO.Update();
moel@130	1024
moel@130	1025	foreach (Sensor sensor in voltages) {
moel@228	1026	float? value = readVoltage(sensor.Index);
moel@130	1027	if (value.HasValue) {
moel@130	1028	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1029	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1030	ActivateSensor(sensor);
moel@130	1031	}
moel@130	1032	}
moel@130	1033
moel@130	1034	foreach (Sensor sensor in temperatures) {
moel@228	1035	float? value = readTemperature(sensor.Index);
moel@130	1036	if (value.HasValue) {
moel@130	1037	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1038	ActivateSensor(sensor);
moel@130	1039	}
moel@130	1040	}
moel@130	1041
moel@130	1042	foreach (Sensor sensor in fans) {
moel@228	1043	float? value = readFan(sensor.Index);
moel@130	1044	if (value.HasValue) {
moel@130	1045	sensor.Value = value;
moel@130	1046	if (value.Value > 0)
moel@130	1047	ActivateSensor(sensor);
moel@130	1048	}
moel@130	1049	}
moel@228	1050
moel@323	1051	foreach (Sensor sensor in controls) {
moel@323	1052	float? value = readControl(sensor.Index);
moel@323	1053	if (value.HasValue) {
moel@323	1054	sensor.Value = value;
moel@323	1055	ActivateSensor(sensor);
moel@323	1056	}
moel@323	1057	}
moel@323	1058
moel@228	1059	postUpdate();
moel@130	1060	}
moel@130	1061
moel@323	1062	public override void Close() {
moel@323	1063	foreach (Sensor sensor in controls) {
moel@323	1064	// restore all controls back to default
moel@323	1065	superIO.SetControl(sensor.Index, null);
moel@323	1066	}
moel@323	1067	base.Close();
moel@323	1068	}
moel@323	1069
moel@130	1070	private class Voltage {
moel@130	1071	public readonly string Name;
moel@130	1072	public readonly int Index;
moel@130	1073	public readonly float Ri;
moel@130	1074	public readonly float Rf;
moel@130	1075	public readonly float Vf;
moel@130	1076	public readonly bool Hidden;
moel@130	1077
moel@202	1078	public Voltage(string name, int index) :
moel@202	1079	this(name, index, false) { }
moel@202	1080
moel@130	1081	public Voltage(string name, int index, bool hidden) :
moel@130	1082	this(name, index, 0, 1, 0, hidden) { }
moel@202	1083
moel@202	1084	public Voltage(string name, int index, float ri, float rf) :
moel@202	1085	this(name, index, ri, rf, 0, false) { }
moel@202	1086
moel@202	1087	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1088
moel@195	1089	public Voltage(string name, int index,
moel@202	1090	float ri, float rf, float vf, bool hidden)
moel@195	1091	{
moel@130	1092	this.Name = name;
moel@130	1093	this.Index = index;
moel@130	1094	this.Ri = ri;
moel@130	1095	this.Rf = rf;
moel@130	1096	this.Vf = vf;
moel@130	1097	this.Hidden = hidden;
moel@130	1098	}
moel@130	1099	}
moel@130	1100
moel@130	1101	private class Temperature {
moel@130	1102	public readonly string Name;
moel@130	1103	public readonly int Index;
moel@130	1104
moel@167	1105	public Temperature(string name, int index) {
moel@130	1106	this.Name = name;
moel@130	1107	this.Index = index;
moel@130	1108	}
moel@130	1109	}
moel@130	1110
moel@130	1111	private class Fan {
moel@130	1112	public readonly string Name;
moel@130	1113	public readonly int Index;
moel@130	1114
moel@130	1115	public Fan(string name, int index) {
moel@130	1116	this.Name = name;
moel@130	1117	this.Index = index;
moel@130	1118	}
moel@130	1119	}
moel@323	1120
moel@323	1121	private class Ctrl {
moel@323	1122	public readonly string Name;
moel@323	1123	public readonly int Index;
moel@323	1124
moel@323	1125	public Ctrl(string name, int index) {
moel@323	1126	this.Name = name;
moel@323	1127	this.Index = index;
moel@323	1128	}
moel@323	1129	}
moel@130	1130	}
moel@130	1131	}

author	moel.mich
	Mon, 28 May 2012 13:45:38 +0000
changeset 351	d389607e74ca
parent 341	5172a92c5c20
child 352	0899f651d5cf
permissions	-rw-r--r--