OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@6b24e39f1b84 (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@428	7	Copyright (C) 2009-2014 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@228	13	using System.Threading;
moel@130	14	using OpenHardwareMonitor.Hardware.LPC;
moel@130	15
moel@130	16	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@416	17	internal sealed class SuperIOHardware : Hardware {
moel@130	18
moel@195	19	private readonly Mainboard mainboard;
moel@195	20	private readonly ISuperIO superIO;
moel@130	21
moel@195	22	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	23	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	24	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	25	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	26
moel@228	27	private delegate float? ReadValueDelegate(int index);
moel@228	28	private delegate void UpdateDelegate();
moel@228	29
moel@228	30	// delegates for mainboard specific sensor reading code
moel@228	31	private readonly ReadValueDelegate readVoltage;
moel@228	32	private readonly ReadValueDelegate readTemperature;
moel@228	33	private readonly ReadValueDelegate readFan;
moel@323	34	private readonly ReadValueDelegate readControl;
moel@228	35
moel@228	36	// delegate for post update mainboard specific code
moel@228	37	private readonly UpdateDelegate postUpdate;
moel@228	38
moel@228	39	// mainboard specific mutex
moel@228	40	private readonly Mutex mutex;
moel@228	41
moel@176	42	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	43	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	44	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@416	45	superIO.Chip.ToString().ToLowerInvariant()), settings)
moel@130	46	{
moel@176	47	this.mainboard = mainboard;
moel@130	48	this.superIO = superIO;
moel@130	49
moel@416	50	IList<Voltage> v;
moel@416	51	IList<Temperature> t;
moel@416	52	IList<Fan> f;
moel@416	53	IList<Ctrl> c;
moel@416	54	GetBoardSpecificConfiguration(superIO, manufacturer, model,
moel@416	55	out v, out t, out f, out c,
moel@416	56	out readVoltage, out readTemperature, out readFan, out readControl,
moel@416	57	out postUpdate, out mutex);
moel@228	58
moel@416	59	CreateVoltageSensors(superIO, settings, v);
moel@416	60	CreateTemperatureSensors(superIO, settings, t);
moel@416	61	CreateFanSensors(superIO, settings, f);
moel@416	62	CreateControlSensors(superIO, settings, c);
moel@416	63	}
moel@228	64
moel@416	65	private void CreateControlSensors(ISuperIO superIO, ISettings settings,
moel@416	66	IList<Ctrl> c)
moel@416	67	{
moel@416	68	foreach (Ctrl ctrl in c) {
moel@416	69	int index = ctrl.Index;
moel@416	70	if (index < superIO.Controls.Length) {
moel@416	71	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@416	72	this, settings);
moel@416	73	Control control = new Control(sensor, settings, 0, 100);
moel@416	74	control.ControlModeChanged += (cc) => {
moel@428	75	switch (cc.ControlMode) {
moel@428	76	case ControlMode.Undefined:
moel@428	77	return;
moel@428	78	case ControlMode.Default:
moel@428	79	superIO.SetControl(index, null);
moel@428	80	break;
moel@428	81	case ControlMode.Software:
moel@428	82	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@428	83	break;
moel@428	84	default:
moel@428	85	return;
moel@416	86	}
moel@416	87	};
moel@416	88	control.SoftwareControlValueChanged += (cc) => {
moel@416	89	if (cc.ControlMode == ControlMode.Software)
moel@416	90	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@416	91	};
moel@428	92
moel@428	93	switch (control.ControlMode) {
moel@428	94	case ControlMode.Undefined:
moel@428	95	break;
moel@428	96	case ControlMode.Default:
moel@428	97	superIO.SetControl(index, null);
moel@428	98	break;
moel@428	99	case ControlMode.Software:
moel@428	100	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@428	101	break;
moel@428	102	default:
moel@428	103	break;
moel@428	104	}
moel@428	105
moel@416	106	sensor.Control = control;
moel@416	107	controls.Add(sensor);
moel@416	108	ActivateSensor(sensor);
moel@416	109	}
moel@416	110	}
moel@416	111	}
moel@416	112
moel@416	113	private void CreateFanSensors(ISuperIO superIO, ISettings settings,
moel@416	114	IList<Fan> f)
moel@416	115	{
moel@416	116	foreach (Fan fan in f) {
moel@416	117	if (fan.Index < superIO.Fans.Length) {
moel@416	118	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@416	119	this, settings);
moel@416	120	fans.Add(sensor);
moel@416	121	}
moel@416	122	}
moel@416	123	}
moel@416	124
moel@416	125	private void CreateTemperatureSensors(ISuperIO superIO, ISettings settings,
moel@416	126	IList<Temperature> t)
moel@416	127	{
moel@416	128	foreach (Temperature temperature in t)
moel@416	129	if (temperature.Index < superIO.Temperatures.Length) {
moel@416	130	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@416	131	SensorType.Temperature, this, new[] {
moel@416	132	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@416	133	}, settings);
moel@416	134	temperatures.Add(sensor);
moel@416	135	}
moel@416	136	}
moel@416	137
moel@416	138	private void CreateVoltageSensors(ISuperIO superIO, ISettings settings,
moel@416	139	IList<Voltage> v)
moel@416	140	{
moel@416	141	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@416	142	foreach (Voltage voltage in v)
moel@416	143	if (voltage.Index < superIO.Voltages.Length) {
moel@416	144	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@416	145	voltage.Hidden, SensorType.Voltage, this, new[] {
moel@416	146	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@416	147	formula, voltage.Ri),
moel@416	148	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@416	149	formula, voltage.Rf),
moel@416	150	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@416	151	formula, voltage.Vf)
moel@416	152	}, settings);
moel@416	153	voltages.Add(sensor);
moel@416	154	}
moel@416	155	}
moel@416	156
moel@416	157	private static void GetBoardSpecificConfiguration(ISuperIO superIO,
moel@416	158	Manufacturer manufacturer, Model model, out IList<Voltage> v,
moel@416	159	out IList<Temperature> t, out IList<Fan> f, out IList<Ctrl> c,
moel@416	160	out ReadValueDelegate readVoltage,
moel@416	161	out ReadValueDelegate readTemperature,
moel@416	162	out ReadValueDelegate readFan,
moel@416	163	out ReadValueDelegate readControl,
moel@416	164	out UpdateDelegate postUpdate, out Mutex mutex) {
moel@416	165	readVoltage = (index) => superIO.Voltages[index];
moel@416	166	readTemperature = (index) => superIO.Temperatures[index];
moel@416	167	readFan = (index) => superIO.Fans[index];
moel@416	168	readControl = (index) => superIO.Controls[index];
moel@416	169
moel@416	170	postUpdate = () => { };
moel@416	171	mutex = null;
moel@416	172
moel@416	173	v = new List<Voltage>();
moel@416	174	t = new List<Temperature>();
moel@416	175	f = new List<Fan>();
moel@416	176	c = new List<Ctrl>();
moel@130	177
moel@130	178	switch (superIO.Chip) {
moel@353	179	case Chip.IT8705F:
moel@130	180	case Chip.IT8712F:
moel@130	181	case Chip.IT8716F:
moel@130	182	case Chip.IT8718F:
moel@416	183	case Chip.IT8720F:
moel@416	184	case Chip.IT8726F:
moel@416	185	GetITEConfigurationsA(superIO, manufacturer, model, v, t, f, c,
moel@416	186	ref readFan, ref postUpdate, ref mutex);
moel@416	187	break;
moel@416	188
moel@416	189	case Chip.IT8721F:
moel@416	190	case Chip.IT8728F:
moel@416	191	case Chip.IT8771E:
moel@416	192	case Chip.IT8772E:
moel@416	193	GetITEConfigurationsB(superIO, manufacturer, model, v, t, f, c);
moel@416	194	break;
moel@416	195
moel@416	196	case Chip.F71858:
moel@416	197	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	198	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@416	199	v.Add(new Voltage("Battery", 2, 150, 150));
moel@416	200	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	201	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	202	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	203	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	204	break;
moel@416	205	case Chip.F71862:
moel@416	206	case Chip.F71869:
moel@416	207	case Chip.F71869A:
moel@416	208	case Chip.F71882:
moel@416	209	case Chip.F71889AD:
moel@416	210	case Chip.F71889ED:
moel@416	211	case Chip.F71889F:
moel@416	212	case Chip.F71808E:
moel@416	213	GetFintekConfiguration(superIO, manufacturer, model, v, t, f);
moel@416	214	break;
moel@416	215
moel@416	216	case Chip.W83627EHF:
moel@416	217	GetWinbondConfigurationEHF(manufacturer, model, v, t, f);
moel@416	218	break;
moel@416	219	case Chip.W83627DHG:
moel@416	220	case Chip.W83627DHGP:
moel@416	221	case Chip.W83667HG:
moel@416	222	case Chip.W83667HGB:
moel@416	223	GetWinbondConfigurationHG(manufacturer, model, v, t, f);
moel@416	224	break;
moel@416	225	case Chip.W83627HF:
moel@416	226	case Chip.W83627THF:
moel@416	227	case Chip.W83687THF:
moel@416	228	v.Add(new Voltage("CPU VCore", 0));
moel@416	229	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	230	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	231	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@416	232	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	233	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@416	234	v.Add(new Voltage("VBAT", 6));
moel@416	235	t.Add(new Temperature("CPU", 0));
moel@416	236	t.Add(new Temperature("Auxiliary", 1));
moel@416	237	t.Add(new Temperature("System", 2));
moel@416	238	f.Add(new Fan("System Fan", 0));
moel@416	239	f.Add(new Fan("CPU Fan", 1));
moel@416	240	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	241	break;
moel@416	242	case Chip.NCT6771F:
moel@416	243	case Chip.NCT6776F:
moel@416	244	GetNuvotonConfigurationF(superIO, manufacturer, model, v, t, f, c);
moel@416	245	break;
moel@416	246	case Chip.NCT6779D:
moel@416	247	case Chip.NCT6791D:
moel@416	248	GetNuvotonConfigurationD(superIO, manufacturer, model, v, t, f, c);
moel@416	249	break;
moel@416	250	default:
moel@416	251	GetDefaultConfiguration(superIO, v, t, f, c);
moel@416	252	break;
moel@416	253	}
moel@416	254	}
moel@416	255
moel@416	256	private static void GetDefaultConfiguration(ISuperIO superIO,
moel@416	257	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	258	{
moel@416	259	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@416	260	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@416	261	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	262	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	263	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	264	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	265	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	266	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	267	}
moel@416	268
moel@416	269	private static void GetITEConfigurationsA(ISuperIO superIO,
moel@416	270	Manufacturer manufacturer, Model model,
moel@416	271	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c,
moel@416	272	ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,
moel@416	273	ref Mutex mutex)
moel@416	274	{
moel@416	275	switch (manufacturer) {
moel@416	276	case Manufacturer.ASUS:
moel@416	277	switch (model) {
moel@416	278	case Model.Crosshair_III_Formula: // IT8720F
moel@416	279	v.Add(new Voltage("VBat", 8));
moel@416	280	t.Add(new Temperature("CPU", 0));
moel@416	281	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	282	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	283	break;
moel@416	284	case Model.M2N_SLI_DELUXE:
moel@416	285	v.Add(new Voltage("CPU VCore", 0));
moel@416	286	v.Add(new Voltage("+3.3V", 1));
moel@416	287	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	288	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	289	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	290	v.Add(new Voltage("VBat", 8));
moel@416	291	t.Add(new Temperature("CPU", 0));
moel@416	292	t.Add(new Temperature("Motherboard", 1));
moel@416	293	f.Add(new Fan("CPU Fan", 0));
moel@416	294	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	295	f.Add(new Fan("Power Fan", 2));
moel@221	296	break;
moel@416	297	case Model.M4A79XTD_EVO: // IT8720F
moel@416	298	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	299	v.Add(new Voltage("VBat", 8));
moel@416	300	t.Add(new Temperature("CPU", 0));
moel@416	301	t.Add(new Temperature("Motherboard", 1));
moel@416	302	f.Add(new Fan("CPU Fan", 0));
moel@416	303	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	304	f.Add(new Fan("Chassis Fan #2", 2));
moel@130	305	break;
moel@130	306	default:
moel@130	307	v.Add(new Voltage("CPU VCore", 0));
moel@130	308	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	309	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	310	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	311	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	312	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	313	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	314	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	315	v.Add(new Voltage("VBat", 8));
moel@130	316	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	317	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	318	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	319	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	320	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	321	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	322	break;
moel@130	323	}
moel@130	324	break;
moel@170	325
moel@416	326	case Manufacturer.ASRock:
moel@416	327	switch (model) {
moel@416	328	case Model.P55_Deluxe: // IT8720F
moel@416	329	GetASRockConfiguration(superIO, v, t, f,
moel@416	330	ref readFan, ref postUpdate, ref mutex);
moel@177	331	break;
moel@416	332	default:
moel@416	333	v.Add(new Voltage("CPU VCore", 0));
moel@416	334	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	335	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	336	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	337	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	338	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	339	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	340	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	341	v.Add(new Voltage("VBat", 8));
moel@416	342	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	343	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	344	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	345	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	346	break;
moel@416	347	};
moel@416	348	break;
moel@416	349
moel@416	350	case Manufacturer.DFI:
moel@416	351	switch (model) {
moel@416	352	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@416	353	v.Add(new Voltage("CPU VCore", 0));
moel@416	354	v.Add(new Voltage("FSB VTT", 1));
moel@416	355	v.Add(new Voltage("+3.3V", 2));
moel@416	356	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	357	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	358	v.Add(new Voltage("NB Core", 5));
moel@416	359	v.Add(new Voltage("VDIMM", 6));
moel@416	360	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	361	v.Add(new Voltage("VBat", 8));
moel@416	362	t.Add(new Temperature("CPU", 0));
moel@416	363	t.Add(new Temperature("System", 1));
moel@416	364	t.Add(new Temperature("Chipset", 2));
moel@416	365	f.Add(new Fan("Fan #1", 0));
moel@416	366	f.Add(new Fan("Fan #2", 1));
moel@416	367	f.Add(new Fan("Fan #3", 2));
moel@416	368	break;
moel@416	369	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@416	370	v.Add(new Voltage("CPU VCore", 0));
moel@416	371	v.Add(new Voltage("VTT", 1));
moel@416	372	v.Add(new Voltage("+3.3V", 2));
moel@416	373	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	374	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	375	v.Add(new Voltage("CPU PLL", 5));
moel@416	376	v.Add(new Voltage("DRAM", 6));
moel@416	377	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	378	v.Add(new Voltage("VBat", 8));
moel@416	379	t.Add(new Temperature("Chipset", 0));
moel@416	380	t.Add(new Temperature("CPU PWM", 1));
moel@416	381	t.Add(new Temperature("CPU", 2));
moel@416	382	f.Add(new Fan("Fan #1", 0));
moel@416	383	f.Add(new Fan("Fan #2", 1));
moel@416	384	f.Add(new Fan("Fan #3", 2));
moel@416	385	break;
moel@416	386	default:
moel@416	387	v.Add(new Voltage("CPU VCore", 0));
moel@416	388	v.Add(new Voltage("VTT", 1, true));
moel@416	389	v.Add(new Voltage("+3.3V", 2, true));
moel@416	390	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@416	391	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@416	392	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	393	v.Add(new Voltage("DRAM", 6, true));
moel@416	394	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@416	395	v.Add(new Voltage("VBat", 8));
moel@416	396	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	397	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	398	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	399	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	400	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	401	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	402	break;
moel@416	403	}
moel@416	404	break;
moel@416	405
moel@416	406	case Manufacturer.Gigabyte:
moel@416	407	switch (model) {
moel@416	408	case Model._965P_S3: // IT8718F
moel@416	409	v.Add(new Voltage("CPU VCore", 0));
moel@416	410	v.Add(new Voltage("DRAM", 1));
moel@416	411	v.Add(new Voltage("+3.3V", 2));
moel@416	412	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	413	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	414	v.Add(new Voltage("VBat", 8));
moel@416	415	t.Add(new Temperature("System", 0));
moel@416	416	t.Add(new Temperature("CPU", 1));
moel@416	417	f.Add(new Fan("CPU Fan", 0));
moel@416	418	f.Add(new Fan("System Fan", 1));
moel@416	419	break;
moel@416	420	case Model.EP45_DS3R: // IT8718F
moel@416	421	case Model.EP45_UD3R:
moel@416	422	case Model.X38_DS5:
moel@416	423	v.Add(new Voltage("CPU VCore", 0));
moel@416	424	v.Add(new Voltage("DRAM", 1));
moel@416	425	v.Add(new Voltage("+3.3V", 2));
moel@416	426	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	427	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	428	v.Add(new Voltage("VBat", 8));
moel@416	429	t.Add(new Temperature("System", 0));
moel@416	430	t.Add(new Temperature("CPU", 1));
moel@416	431	f.Add(new Fan("CPU Fan", 0));
moel@416	432	f.Add(new Fan("System Fan #2", 1));
moel@416	433	f.Add(new Fan("Power Fan", 2));
moel@416	434	f.Add(new Fan("System Fan #1", 3));
moel@416	435	break;
moel@416	436	case Model.EX58_EXTREME: // IT8720F
moel@416	437	v.Add(new Voltage("CPU VCore", 0));
moel@416	438	v.Add(new Voltage("DRAM", 1));
moel@416	439	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	440	v.Add(new Voltage("VBat", 8));
moel@416	441	t.Add(new Temperature("System", 0));
moel@416	442	t.Add(new Temperature("CPU", 1));
moel@416	443	t.Add(new Temperature("Northbridge", 2));
moel@416	444	f.Add(new Fan("CPU Fan", 0));
moel@416	445	f.Add(new Fan("System Fan #2", 1));
moel@416	446	f.Add(new Fan("Power Fan", 2));
moel@416	447	f.Add(new Fan("System Fan #1", 3));
moel@416	448	break;
moel@416	449	case Model.P35_DS3: // IT8718F
moel@416	450	case Model.P35_DS3L: // IT8718F
moel@416	451	v.Add(new Voltage("CPU VCore", 0));
moel@416	452	v.Add(new Voltage("DRAM", 1));
moel@416	453	v.Add(new Voltage("+3.3V", 2));
moel@416	454	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	455	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	456	v.Add(new Voltage("VBat", 8));
moel@416	457	t.Add(new Temperature("System", 0));
moel@416	458	t.Add(new Temperature("CPU", 1));
moel@416	459	f.Add(new Fan("CPU Fan", 0));
moel@416	460	f.Add(new Fan("System Fan #1", 1));
moel@416	461	f.Add(new Fan("System Fan #2", 2));
moel@416	462	f.Add(new Fan("Power Fan", 3));
moel@416	463	break;
moel@416	464	case Model.P55_UD4: // IT8720F
moel@416	465	case Model.P55A_UD3: // IT8720F
moel@416	466	case Model.P55M_UD4: // IT8720F
moel@416	467	case Model.H55_USB3: // IT8720F
moel@416	468	case Model.EX58_UD3R: // IT8720F
moel@416	469	v.Add(new Voltage("CPU VCore", 0));
moel@416	470	v.Add(new Voltage("DRAM", 1));
moel@416	471	v.Add(new Voltage("+3.3V", 2));
moel@416	472	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	473	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	474	v.Add(new Voltage("VBat", 8));
moel@416	475	t.Add(new Temperature("System", 0));
moel@416	476	t.Add(new Temperature("CPU", 2));
moel@416	477	f.Add(new Fan("CPU Fan", 0));
moel@416	478	f.Add(new Fan("System Fan #2", 1));
moel@416	479	f.Add(new Fan("Power Fan", 2));
moel@416	480	f.Add(new Fan("System Fan #1", 3));
moel@416	481	break;
moel@416	482	case Model.H55N_USB3: // IT8720F
moel@416	483	v.Add(new Voltage("CPU VCore", 0));
moel@416	484	v.Add(new Voltage("DRAM", 1));
moel@416	485	v.Add(new Voltage("+3.3V", 2));
moel@416	486	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	487	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	488	v.Add(new Voltage("VBat", 8));
moel@416	489	t.Add(new Temperature("System", 0));
moel@416	490	t.Add(new Temperature("CPU", 2));
moel@416	491	f.Add(new Fan("CPU Fan", 0));
moel@416	492	f.Add(new Fan("System Fan", 1));
moel@416	493	break;
moel@416	494	case Model.G41M_Combo: // IT8718F
moel@416	495	case Model.G41MT_S2: // IT8718F
moel@416	496	case Model.G41MT_S2P: // IT8718F
moel@416	497	v.Add(new Voltage("CPU VCore", 0));
moel@416	498	v.Add(new Voltage("DRAM", 1));
moel@416	499	v.Add(new Voltage("+3.3V", 2));
moel@416	500	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	501	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	502	v.Add(new Voltage("VBat", 8));
moel@416	503	t.Add(new Temperature("CPU", 2));
moel@416	504	f.Add(new Fan("CPU Fan", 0));
moel@416	505	f.Add(new Fan("System Fan", 1));
moel@416	506	break;
moel@416	507	case Model.GA_970A_UD3: // IT8720F
moel@416	508	v.Add(new Voltage("CPU VCore", 0));
moel@416	509	v.Add(new Voltage("DRAM", 1));
moel@416	510	v.Add(new Voltage("+3.3V", 2));
moel@416	511	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	512	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	513	v.Add(new Voltage("VBat", 8));
moel@416	514	t.Add(new Temperature("System", 0));
moel@416	515	t.Add(new Temperature("CPU", 1));
moel@416	516	f.Add(new Fan("CPU Fan", 0));
moel@416	517	f.Add(new Fan("System Fan #1", 1));
moel@416	518	f.Add(new Fan("System Fan #2", 2));
moel@416	519	f.Add(new Fan("Power Fan", 4));
moel@416	520	c.Add(new Ctrl("PWM 1", 0));
moel@416	521	c.Add(new Ctrl("PWM 2", 1));
moel@416	522	c.Add(new Ctrl("PWM 3", 2));
moel@416	523	break;
moel@416	524	case Model.GA_MA770T_UD3: // IT8720F
moel@416	525	case Model.GA_MA770T_UD3P: // IT8720F
moel@416	526	case Model.GA_MA790X_UD3P: // IT8720F
moel@416	527	v.Add(new Voltage("CPU VCore", 0));
moel@416	528	v.Add(new Voltage("DRAM", 1));
moel@416	529	v.Add(new Voltage("+3.3V", 2));
moel@416	530	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	531	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	532	v.Add(new Voltage("VBat", 8));
moel@416	533	t.Add(new Temperature("System", 0));
moel@416	534	t.Add(new Temperature("CPU", 1));
moel@416	535	f.Add(new Fan("CPU Fan", 0));
moel@416	536	f.Add(new Fan("System Fan #1", 1));
moel@416	537	f.Add(new Fan("System Fan #2", 2));
moel@416	538	f.Add(new Fan("Power Fan", 3));
moel@416	539	break;
moel@416	540	case Model.GA_MA78LM_S2H: // IT8718F
moel@416	541	v.Add(new Voltage("CPU VCore", 0));
moel@416	542	v.Add(new Voltage("DRAM", 1));
moel@416	543	v.Add(new Voltage("+3.3V", 2));
moel@416	544	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	545	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	546	v.Add(new Voltage("VBat", 8));
moel@416	547	t.Add(new Temperature("System", 0));
moel@416	548	t.Add(new Temperature("CPU", 1));
moel@416	549	t.Add(new Temperature("VRM", 2));
moel@416	550	f.Add(new Fan("CPU Fan", 0));
moel@416	551	f.Add(new Fan("System Fan #1", 1));
moel@416	552	f.Add(new Fan("System Fan #2", 2));
moel@416	553	f.Add(new Fan("Power Fan", 3));
moel@416	554	break;
moel@416	555	case Model.GA_MA785GM_US2H: // IT8718F
moel@416	556	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@416	557	v.Add(new Voltage("CPU VCore", 0));
moel@416	558	v.Add(new Voltage("DRAM", 1));
moel@416	559	v.Add(new Voltage("+3.3V", 2));
moel@416	560	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	561	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	562	v.Add(new Voltage("VBat", 8));
moel@416	563	t.Add(new Temperature("System", 0));
moel@416	564	t.Add(new Temperature("CPU", 1));
moel@416	565	f.Add(new Fan("CPU Fan", 0));
moel@416	566	f.Add(new Fan("System Fan", 1));
moel@416	567	f.Add(new Fan("NB Fan", 2));
moel@416	568	break;
moel@416	569	case Model.X58A_UD3R: // IT8720F
moel@416	570	v.Add(new Voltage("CPU VCore", 0));
moel@416	571	v.Add(new Voltage("DRAM", 1));
moel@416	572	v.Add(new Voltage("+3.3V", 2));
moel@416	573	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	574	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	575	v.Add(new Voltage("VBat", 8));
moel@416	576	t.Add(new Temperature("System", 0));
moel@416	577	t.Add(new Temperature("CPU", 1));
moel@416	578	t.Add(new Temperature("Northbridge", 2));
moel@416	579	f.Add(new Fan("CPU Fan", 0));
moel@416	580	f.Add(new Fan("System Fan #2", 1));
moel@416	581	f.Add(new Fan("Power Fan", 2));
moel@416	582	f.Add(new Fan("System Fan #1", 3));
moel@416	583	break;
moel@416	584	default:
moel@416	585	v.Add(new Voltage("CPU VCore", 0));
moel@416	586	v.Add(new Voltage("DRAM", 1, true));
moel@416	587	v.Add(new Voltage("+3.3V", 2, true));
moel@416	588	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@416	589	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	590	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	591	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	592	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	593	v.Add(new Voltage("VBat", 8));
moel@416	594	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	595	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	596	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	597	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	598	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	599	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	600	break;
moel@416	601	}
moel@416	602	break;
moel@416	603
moel@416	604	default:
moel@416	605	v.Add(new Voltage("CPU VCore", 0));
moel@416	606	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	607	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	608	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	609	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	610	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	611	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	612	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	613	v.Add(new Voltage("VBat", 8));
moel@416	614	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	615	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	616	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	617	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	618	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	619	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	620	break;
moel@416	621	}
moel@416	622	}
moel@416	623
moel@416	624	private static void GetASRockConfiguration(ISuperIO superIO,
moel@416	625	IList<Voltage> v, IList<Temperature> t, IList<Fan> f,
moel@416	626	ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,
moel@416	627	ref Mutex mutex)
moel@416	628	{
moel@416	629	v.Add(new Voltage("CPU VCore", 0));
moel@416	630	v.Add(new Voltage("+3.3V", 2));
moel@416	631	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	632	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@416	633	v.Add(new Voltage("VBat", 8));
moel@416	634	t.Add(new Temperature("CPU", 0));
moel@416	635	t.Add(new Temperature("Motherboard", 1));
moel@416	636	f.Add(new Fan("CPU Fan", 0));
moel@416	637	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	638
moel@416	639	// this mutex is also used by the official ASRock tool
moel@416	640	mutex = new Mutex(false, "ASRockOCMark");
moel@416	641
moel@416	642	bool exclusiveAccess = false;
moel@416	643	try {
moel@416	644	exclusiveAccess = mutex.WaitOne(10, false);
moel@416	645	} catch (AbandonedMutexException) { }
moel@416	646	catch (InvalidOperationException) { }
moel@416	647
moel@416	648	// only read additional fans if we get exclusive access
moel@416	649	if (exclusiveAccess) {
moel@416	650
moel@416	651	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	652	f.Add(new Fan("Chassis Fan #3", 3));
moel@416	653	f.Add(new Fan("Power Fan", 4));
moel@416	654
moel@416	655	readFan = (index) => {
moel@416	656	if (index < 2) {
moel@416	657	return superIO.Fans[index];
moel@416	658	} else {
moel@416	659	// get GPIO 80-87
moel@416	660	byte? gpio = superIO.ReadGPIO(7);
moel@416	661	if (!gpio.HasValue)
moel@416	662	return null;
moel@416	663
moel@416	664	// read the last 3 fans based on GPIO 83-85
moel@416	665	int[] masks = { 0x05, 0x03, 0x06 };
moel@416	666	return (((gpio.Value >> 3) & 0x07) ==
moel@416	667	masks[index - 2]) ? superIO.Fans[2] : null;
moel@416	668	}
moel@416	669	};
moel@416	670
moel@416	671	int fanIndex = 0;
moel@416	672	postUpdate = () => {
moel@416	673	// get GPIO 80-87
moel@416	674	byte? gpio = superIO.ReadGPIO(7);
moel@416	675	if (!gpio.HasValue)
moel@416	676	return;
moel@416	677
moel@416	678	// prepare the GPIO 83-85 for the next update
moel@416	679	int[] masks = { 0x05, 0x03, 0x06 };
moel@416	680	superIO.WriteGPIO(7,
moel@416	681	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@416	682	fanIndex = (fanIndex + 1) % 3;
moel@416	683	};
moel@416	684	}
moel@416	685	}
moel@416	686
moel@416	687	private static void GetITEConfigurationsB(ISuperIO superIO,
moel@416	688	Manufacturer manufacturer, Model model,
moel@416	689	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	690	{
moel@416	691	switch (manufacturer) {
moel@416	692	case Manufacturer.ECS:
moel@416	693	switch (model) {
moel@416	694	case Model.A890GXM_A: // IT8721F
moel@416	695	v.Add(new Voltage("CPU VCore", 0));
moel@416	696	v.Add(new Voltage("VDIMM", 1));
moel@416	697	v.Add(new Voltage("NB Voltage", 2));
moel@416	698	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@416	699	// v.Add(new Voltage("VDIMM", 6, true));
moel@416	700	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	701	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	702	t.Add(new Temperature("CPU", 0));
moel@416	703	t.Add(new Temperature("System", 1));
moel@416	704	t.Add(new Temperature("Northbridge", 2));
moel@416	705	f.Add(new Fan("CPU Fan", 0));
moel@416	706	f.Add(new Fan("System Fan", 1));
moel@416	707	f.Add(new Fan("Power Fan", 2));
moel@416	708	break;
moel@416	709	default:
moel@416	710	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	711	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	712	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	713	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@416	714	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	715	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	716	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	717	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	718	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	719	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	720	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	721	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	722	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	723	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	724	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	725	break;
moel@416	726	}
moel@416	727	break;
moel@416	728	case Manufacturer.Gigabyte:
moel@416	729	switch (model) {
moel@416	730	case Model.H61M_DS2_REV_1_2: // IT8728F
moel@416	731	case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@416	732	v.Add(new Voltage("VTT", 0));
moel@416	733	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	734	v.Add(new Voltage("CPU VCore", 5));
moel@416	735	v.Add(new Voltage("DRAM", 6));
moel@416	736	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	737	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	738	t.Add(new Temperature("System", 0));
moel@416	739	t.Add(new Temperature("CPU", 2));
moel@416	740	f.Add(new Fan("CPU Fan", 0));
moel@416	741	f.Add(new Fan("System Fan", 1));
moel@416	742	break;
moel@416	743	case Model.H67A_UD3H_B3: // IT8728F
moel@416	744	case Model.H67A_USB3_B3: // IT8728F
moel@416	745	v.Add(new Voltage("VTT", 0));
moel@416	746	v.Add(new Voltage("+5V", 1, 15, 10));
moel@416	747	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	748	v.Add(new Voltage("CPU VCore", 5));
moel@416	749	v.Add(new Voltage("DRAM", 6));
moel@416	750	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	751	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	752	t.Add(new Temperature("System", 0));
moel@416	753	t.Add(new Temperature("CPU", 2));
moel@416	754	f.Add(new Fan("CPU Fan", 0));
moel@416	755	f.Add(new Fan("System Fan #1", 1));
moel@416	756	f.Add(new Fan("Power Fan", 2));
moel@416	757	f.Add(new Fan("System Fan #2", 3));
moel@416	758	break;
moel@416	759	case Model.Z68A_D3H_B3: // IT8728F
moel@416	760	v.Add(new Voltage("VTT", 0));
moel@416	761	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	762	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	763	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	764	v.Add(new Voltage("CPU VCore", 5));
moel@416	765	v.Add(new Voltage("DRAM", 6));
moel@416	766	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	767	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	768	t.Add(new Temperature("System", 0));
moel@416	769	t.Add(new Temperature("CPU", 2));
moel@416	770	f.Add(new Fan("CPU Fan", 0));
moel@416	771	f.Add(new Fan("System Fan #1", 1));
moel@416	772	f.Add(new Fan("Power Fan", 2));
moel@416	773	f.Add(new Fan("System Fan #2", 3));
moel@416	774	break;
moel@416	775	case Model.P67A_UD3_B3: // IT8728F
moel@416	776	case Model.P67A_UD3R_B3: // IT8728F
moel@416	777	case Model.P67A_UD4_B3: // IT8728F
moel@416	778	case Model.Z68AP_D3: // IT8728F
moel@416	779	case Model.Z68X_UD3H_B3: // IT8728F
moel@416	780	v.Add(new Voltage("VTT", 0));
moel@416	781	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	782	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	783	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	784	v.Add(new Voltage("CPU VCore", 5));
moel@416	785	v.Add(new Voltage("DRAM", 6));
moel@416	786	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	787	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	788	t.Add(new Temperature("System", 0));
moel@416	789	t.Add(new Temperature("CPU", 2));
moel@416	790	f.Add(new Fan("CPU Fan", 0));
moel@416	791	f.Add(new Fan("System Fan #2", 1));
moel@416	792	f.Add(new Fan("Power Fan", 2));
moel@416	793	f.Add(new Fan("System Fan #1", 3));
moel@416	794	break;
moel@416	795	case Model.Z68X_UD7_B3: // IT8728F
moel@416	796	v.Add(new Voltage("VTT", 0));
moel@416	797	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	798	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	799	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	800	v.Add(new Voltage("CPU VCore", 5));
moel@416	801	v.Add(new Voltage("DRAM", 6));
moel@416	802	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	803	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	804	t.Add(new Temperature("System", 0));
moel@416	805	t.Add(new Temperature("CPU", 1));
moel@416	806	t.Add(new Temperature("System 3", 2));
moel@416	807	f.Add(new Fan("CPU Fan", 0));
moel@416	808	f.Add(new Fan("Power Fan", 1));
moel@416	809	f.Add(new Fan("System Fan #1", 2));
moel@416	810	f.Add(new Fan("System Fan #2", 3));
moel@416	811	f.Add(new Fan("System Fan #3", 4));
moel@320	812	break;
moel@177	813	default:
moel@177	814	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	815	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	816	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	817	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	818	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	819	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	820	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	821	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	822	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	823	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	824	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	825	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	826	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	827	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	828	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@177	829	break;
moel@177	830	}
moel@170	831	break;
moel@416	832	case Manufacturer.Shuttle:
moel@416	833	switch (model) {
moel@416	834	case Model.FH67: // IT8772E
moel@416	835	v.Add(new Voltage("CPU VCore", 0));
moel@416	836	v.Add(new Voltage("DRAM", 1));
moel@416	837	v.Add(new Voltage("PCH VCCIO", 2));
moel@416	838	v.Add(new Voltage("CPU VCCIO", 3));
moel@416	839	v.Add(new Voltage("Graphic Voltage", 4));
moel@416	840	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	841	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	842	t.Add(new Temperature("System", 0));
moel@416	843	t.Add(new Temperature("CPU", 1));
moel@416	844	f.Add(new Fan("Fan #1", 0));
moel@416	845	f.Add(new Fan("CPU Fan", 1));
moel@416	846	break;
moel@416	847	default:
moel@416	848	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	849	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	850	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	851	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	852	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	853	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	854	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	855	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	856	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	857	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	858	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	859	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	860	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	861	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	862	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	863	break;
moel@416	864	}
moel@416	865	break;
moel@416	866	default:
moel@416	867	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	868	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	869	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	870	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	871	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	872	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	873	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	874	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	875	v.Add(new Voltage("VBat", 8, 10, 10));
moel@130	876	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	877	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	878	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	879	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	880	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	881	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	882	break;
moel@416	883	}
moel@416	884	}
moel@416	885
moel@416	886	private static void GetFintekConfiguration(ISuperIO superIO,
moel@416	887	Manufacturer manufacturer, Model model,
moel@416	888	IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	889	{
moel@416	890	switch (manufacturer) {
moel@416	891	case Manufacturer.EVGA:
moel@416	892	switch (model) {
moel@416	893	case Model.X58_SLI_Classified: // F71882
moel@416	894	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	895	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@416	896	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@416	897	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@416	898	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@416	899	v.Add(new Voltage("+5V", 5, 51, 12));
moel@416	900	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@416	901	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@416	902	v.Add(new Voltage("VBat", 8, 150, 150));
moel@416	903	t.Add(new Temperature("CPU", 0));
moel@416	904	t.Add(new Temperature("VREG", 1));
moel@416	905	t.Add(new Temperature("System", 2));
moel@416	906	f.Add(new Fan("CPU Fan", 0));
moel@416	907	f.Add(new Fan("Power Fan", 1));
moel@416	908	f.Add(new Fan("Chassis Fan", 2));
moel@132	909	break;
moel@132	910	default:
moel@195	911	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	912	v.Add(new Voltage("CPU VCore", 1));
moel@132	913	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	914	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	915	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	916	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	917	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	918	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	919	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	920	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	921	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	922	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	923	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	924	break;
moel@132	925	}
moel@130	926	break;
moel@416	927	default:
moel@416	928	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	929	v.Add(new Voltage("CPU VCore", 1));
moel@416	930	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	931	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	932	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	933	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	934	if (superIO.Chip != Chip.F71808E)
moel@416	935	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	936	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@416	937	v.Add(new Voltage("VBat", 8, 150, 150));
moel@416	938	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	939	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	940	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	941	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	942	break;
moel@416	943	}
moel@416	944	}
moel@130	945
moel@416	946	private static void GetNuvotonConfigurationF(ISuperIO superIO,
moel@416	947	Manufacturer manufacturer, Model model,
moel@416	948	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	949	{
moel@416	950	switch (manufacturer) {
moel@416	951	case Manufacturer.ASUS:
moel@416	952	switch (model) {
moel@416	953	case Model.P8P67: // NCT6776F
moel@416	954	case Model.P8P67_EVO: // NCT6776F
moel@416	955	case Model.P8P67_PRO: // NCT6776F
moel@220	956	v.Add(new Voltage("CPU VCore", 0));
moel@416	957	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	958	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	959	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	960	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	961	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	962	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	963	t.Add(new Temperature("CPU", 0));
moel@416	964	t.Add(new Temperature("Auxiliary", 2));
moel@416	965	t.Add(new Temperature("Motherboard", 3));
moel@416	966	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	967	f.Add(new Fan("CPU Fan", 1));
moel@416	968	f.Add(new Fan("Power Fan", 2));
moel@416	969	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	970	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@416	971	c.Add(new Ctrl("CPU Fan", 1));
moel@416	972	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@416	973	break;
moel@416	974	case Model.P8P67_M_PRO: // NCT6776F
moel@416	975	v.Add(new Voltage("CPU VCore", 0));
moel@416	976	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	977	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	978	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	979	v.Add(new Voltage("+5V", 4, 12, 3));
moel@220	980	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	981	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	982	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	983	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	984	t.Add(new Temperature("CPU", 0));
moel@416	985	t.Add(new Temperature("Motherboard", 3));
moel@416	986	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	987	f.Add(new Fan("CPU Fan", 1));
moel@416	988	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	989	f.Add(new Fan("Power Fan", 3));
moel@416	990	f.Add(new Fan("Auxiliary Fan", 4));
moel@152	991	break;
moel@416	992	case Model.P8Z68_V_PRO: // NCT6776F
moel@416	993	v.Add(new Voltage("CPU VCore", 0));
moel@416	994	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	995	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	996	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	997	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	998	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	999	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1000	t.Add(new Temperature("CPU", 0));
moel@416	1001	t.Add(new Temperature("Auxiliary", 2));
moel@416	1002	t.Add(new Temperature("Motherboard", 3));
moel@416	1003	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	1004	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	1005	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	1006	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@416	1007	break;
moel@416	1008	case Model.P9X79: // NCT6776F
moel@416	1009	v.Add(new Voltage("CPU VCore", 0));
moel@416	1010	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	1011	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1012	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1013	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	1014	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1015	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1016	t.Add(new Temperature("CPU", 0));
moel@416	1017	t.Add(new Temperature("Motherboard", 3));
moel@416	1018	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	1019	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	1020	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	1021	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1022	break;
moel@265	1023	default:
moel@265	1024	v.Add(new Voltage("CPU VCore", 0));
moel@265	1025	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	1026	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	1027	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	1028	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	1029	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	1030	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	1031	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	1032	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	1033	t.Add(new Temperature("CPU Core", 0));
moel@354	1034	t.Add(new Temperature("Temperature #1", 1));
moel@354	1035	t.Add(new Temperature("Temperature #2", 2));
moel@354	1036	t.Add(new Temperature("Temperature #3", 3));
moel@265	1037	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	1038	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	1039	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	1040	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1041	break;
moel@265	1042	}
moel@245	1043	break;
moel@416	1044	default:
moel@416	1045	v.Add(new Voltage("CPU VCore", 0));
moel@416	1046	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1047	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1048	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1049	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1050	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1051	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1052	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1053	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1054	t.Add(new Temperature("CPU Core", 0));
moel@416	1055	t.Add(new Temperature("Temperature #1", 1));
moel@416	1056	t.Add(new Temperature("Temperature #2", 2));
moel@416	1057	t.Add(new Temperature("Temperature #3", 3));
moel@416	1058	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	1059	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	1060	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	1061	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	1062	break;
moel@416	1063	}
moel@416	1064	}
moel@416	1065
moel@416	1066	private static void GetNuvotonConfigurationD(ISuperIO superIO,
moel@416	1067	Manufacturer manufacturer, Model model,
moel@416	1068	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	1069	{
moel@416	1070	switch (manufacturer) {
moel@416	1071	case Manufacturer.ASUS:
moel@416	1072	switch (model) {
moel@416	1073	case Model.P8Z77_V: // NCT6779D
moel@416	1074	v.Add(new Voltage("CPU VCore", 0));
moel@416	1075	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1076	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1077	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1078	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1079	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1080	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1081	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1082	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1083	v.Add(new Voltage("VTT", 9));
moel@416	1084	v.Add(new Voltage("Voltage #11", 10, true));
moel@416	1085	v.Add(new Voltage("Voltage #12", 11, true));
moel@416	1086	v.Add(new Voltage("Voltage #13", 12, true));
moel@416	1087	v.Add(new Voltage("Voltage #14", 13, true));
moel@416	1088	v.Add(new Voltage("Voltage #15", 14, true));
moel@416	1089	t.Add(new Temperature("CPU Core", 0));
moel@416	1090	t.Add(new Temperature("Auxiliary", 1));
moel@416	1091	t.Add(new Temperature("Motherboard", 2));
moel@416	1092	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1093	f.Add(new Fan("CPU Fan", 1));
moel@416	1094	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	1095	f.Add(new Fan("Chassis Fan #3", 3));
moel@416	1096	c.Add(new Ctrl("Chassis Fan #1", 0));
moel@416	1097	c.Add(new Ctrl("CPU Fan", 1));
moel@416	1098	c.Add(new Ctrl("Chassis Fan #2", 2));
moel@416	1099	c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359	1100	break;
moel@359	1101	default:
moel@359	1102	v.Add(new Voltage("CPU VCore", 0));
moel@359	1103	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1104	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1105	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1106	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1107	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1108	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1109	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1110	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1111	v.Add(new Voltage("VTT", 9));
moel@359	1112	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1113	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1114	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1115	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1116	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1117	t.Add(new Temperature("CPU Core", 0));
moel@359	1118	t.Add(new Temperature("Temperature #1", 1));
moel@359	1119	t.Add(new Temperature("Temperature #2", 2));
moel@359	1120	t.Add(new Temperature("Temperature #3", 3));
moel@359	1121	t.Add(new Temperature("Temperature #4", 4));
moel@359	1122	t.Add(new Temperature("Temperature #5", 5));
moel@359	1123	t.Add(new Temperature("Temperature #6", 6));
moel@359	1124	for (int i = 0; i < superIO.Fans.Length; i++)
moel@359	1125	f.Add(new Fan("Fan #" + (i + 1), i));
moel@359	1126	for (int i = 0; i < superIO.Controls.Length; i++)
moel@359	1127	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359	1128	break;
moel@359	1129	}
moel@356	1130	break;
moel@130	1131	default:
moel@416	1132	v.Add(new Voltage("CPU VCore", 0));
moel@416	1133	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1134	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1135	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1136	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1137	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1138	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1139	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1140	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1141	v.Add(new Voltage("VTT", 9));
moel@416	1142	v.Add(new Voltage("Voltage #11", 10, true));
moel@416	1143	v.Add(new Voltage("Voltage #12", 11, true));
moel@416	1144	v.Add(new Voltage("Voltage #13", 12, true));
moel@416	1145	v.Add(new Voltage("Voltage #14", 13, true));
moel@416	1146	v.Add(new Voltage("Voltage #15", 14, true));
moel@416	1147	t.Add(new Temperature("CPU Core", 0));
moel@416	1148	t.Add(new Temperature("Temperature #1", 1));
moel@416	1149	t.Add(new Temperature("Temperature #2", 2));
moel@416	1150	t.Add(new Temperature("Temperature #3", 3));
moel@416	1151	t.Add(new Temperature("Temperature #4", 4));
moel@416	1152	t.Add(new Temperature("Temperature #5", 5));
moel@416	1153	t.Add(new Temperature("Temperature #6", 6));
moel@130	1154	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	1155	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	1156	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	1157	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	1158	break;
moel@130	1159	}
moel@416	1160	}
moel@130	1161
moel@416	1162	private static void GetWinbondConfigurationEHF(Manufacturer manufacturer,
moel@416	1163	Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	1164	{
moel@416	1165	switch (manufacturer) {
moel@416	1166	case Manufacturer.ASRock:
moel@416	1167	switch (model) {
moel@416	1168	case Model.AOD790GX_128M: // W83627EHF
moel@416	1169	v.Add(new Voltage("CPU VCore", 0));
moel@416	1170	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1171	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@416	1172	v.Add(new Voltage("+5V", 5, 20, 10));
moel@416	1173	v.Add(new Voltage("+12V", 6, 28, 5));
moel@416	1174	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1175	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1176	t.Add(new Temperature("CPU", 0));
moel@416	1177	t.Add(new Temperature("Motherboard", 2));
moel@416	1178	f.Add(new Fan("CPU Fan", 0));
moel@416	1179	f.Add(new Fan("Chassis Fan", 1));
moel@416	1180	break;
moel@416	1181	default:
moel@416	1182	v.Add(new Voltage("CPU VCore", 0));
moel@416	1183	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1184	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1185	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1186	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1187	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1188	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1189	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1190	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1191	v.Add(new Voltage("Voltage #10", 9, true));
moel@416	1192	t.Add(new Temperature("CPU", 0));
moel@416	1193	t.Add(new Temperature("Auxiliary", 1));
moel@416	1194	t.Add(new Temperature("System", 2));
moel@416	1195	f.Add(new Fan("System Fan", 0));
moel@416	1196	f.Add(new Fan("CPU Fan", 1));
moel@416	1197	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1198	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1199	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1200	break;
moel@416	1201	} break;
moel@416	1202	default:
moel@416	1203	v.Add(new Voltage("CPU VCore", 0));
moel@416	1204	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1205	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1206	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1207	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1208	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1209	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1210	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1211	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1212	v.Add(new Voltage("Voltage #10", 9, true));
moel@416	1213	t.Add(new Temperature("CPU", 0));
moel@416	1214	t.Add(new Temperature("Auxiliary", 1));
moel@416	1215	t.Add(new Temperature("System", 2));
moel@416	1216	f.Add(new Fan("System Fan", 0));
moel@416	1217	f.Add(new Fan("CPU Fan", 1));
moel@416	1218	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1219	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1220	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1221	break;
moel@130	1222	}
moel@416	1223	}
moel@130	1224
moel@416	1225	private static void GetWinbondConfigurationHG(Manufacturer manufacturer,
moel@416	1226	Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	1227	{
moel@416	1228	switch (manufacturer) {
moel@416	1229	case Manufacturer.ASRock:
moel@416	1230	switch (model) {
moel@416	1231	case Model._880GMH_USB3: // W83627DHG-P
moel@416	1232	v.Add(new Voltage("CPU VCore", 0));
moel@416	1233	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1234	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@416	1235	v.Add(new Voltage("+12V", 6, 56, 10));
moel@416	1236	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1237	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1238	t.Add(new Temperature("CPU", 0));
moel@416	1239	t.Add(new Temperature("Motherboard", 2));
moel@416	1240	f.Add(new Fan("Chassis Fan", 0));
moel@416	1241	f.Add(new Fan("CPU Fan", 1));
moel@416	1242	f.Add(new Fan("Power Fan", 2));
moel@416	1243	break;
moel@416	1244	default:
moel@416	1245	v.Add(new Voltage("CPU VCore", 0));
moel@416	1246	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1247	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1248	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1249	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1250	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1251	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1252	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1253	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1254	t.Add(new Temperature("CPU", 0));
moel@416	1255	t.Add(new Temperature("Auxiliary", 1));
moel@416	1256	t.Add(new Temperature("System", 2));
moel@416	1257	f.Add(new Fan("System Fan", 0));
moel@416	1258	f.Add(new Fan("CPU Fan", 1));
moel@416	1259	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1260	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1261	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1262	break;
moel@416	1263	}
moel@416	1264	break;
moel@416	1265	case Manufacturer.ASUS:
moel@416	1266	switch (model) {
moel@416	1267	case Model.P6T: // W83667HG
moel@416	1268	case Model.P6X58D_E: // W83667HG
moel@416	1269	case Model.Rampage_II_GENE: // W83667HG
moel@416	1270	v.Add(new Voltage("CPU VCore", 0));
moel@416	1271	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@416	1272	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1273	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1274	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@416	1275	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1276	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1277	t.Add(new Temperature("CPU", 0));
moel@416	1278	t.Add(new Temperature("Motherboard", 2));
moel@416	1279	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1280	f.Add(new Fan("CPU Fan", 1));
moel@416	1281	f.Add(new Fan("Power Fan", 2));
moel@416	1282	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	1283	f.Add(new Fan("Chassis Fan #3", 4));
moel@416	1284	break;
moel@416	1285	case Model.Rampage_Extreme: // W83667HG
moel@416	1286	v.Add(new Voltage("CPU VCore", 0));
moel@416	1287	v.Add(new Voltage("+12V", 1, 12, 2));
moel@416	1288	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1289	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1290	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@416	1291	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1292	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1293	t.Add(new Temperature("CPU", 0));
moel@416	1294	t.Add(new Temperature("Motherboard", 2));
moel@416	1295	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1296	f.Add(new Fan("CPU Fan", 1));
moel@416	1297	f.Add(new Fan("Power Fan", 2));
moel@416	1298	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	1299	f.Add(new Fan("Chassis Fan #3", 4));
moel@416	1300	break;
moel@416	1301	default:
moel@416	1302	v.Add(new Voltage("CPU VCore", 0));
moel@416	1303	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1304	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1305	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1306	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1307	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1308	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1309	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1310	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1311	t.Add(new Temperature("CPU", 0));
moel@416	1312	t.Add(new Temperature("Auxiliary", 1));
moel@416	1313	t.Add(new Temperature("System", 2));
moel@416	1314	f.Add(new Fan("System Fan", 0));
moel@416	1315	f.Add(new Fan("CPU Fan", 1));
moel@416	1316	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1317	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1318	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1319	break;
moel@416	1320	}
moel@416	1321	break;
moel@416	1322	default:
moel@416	1323	v.Add(new Voltage("CPU VCore", 0));
moel@416	1324	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1325	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1326	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1327	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1328	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1329	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1330	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1331	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1332	t.Add(new Temperature("CPU", 0));
moel@416	1333	t.Add(new Temperature("Auxiliary", 1));
moel@416	1334	t.Add(new Temperature("System", 2));
moel@416	1335	f.Add(new Fan("System Fan", 0));
moel@416	1336	f.Add(new Fan("CPU Fan", 1));
moel@416	1337	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1338	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1339	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1340	break;
moel@323	1341	}
moel@130	1342	}
moel@130	1343
moel@165	1344	public override HardwareType HardwareType {
moel@165	1345	get { return HardwareType.SuperIO; }
moel@130	1346	}
moel@130	1347
moel@176	1348	public override IHardware Parent {
moel@176	1349	get { return mainboard; }
moel@176	1350	}
moel@176	1351
moel@130	1352
moel@130	1353	public override string GetReport() {
moel@130	1354	return superIO.GetReport();
moel@130	1355	}
moel@130	1356
moel@130	1357	public override void Update() {
moel@130	1358	superIO.Update();
moel@130	1359
moel@130	1360	foreach (Sensor sensor in voltages) {
moel@228	1361	float? value = readVoltage(sensor.Index);
moel@130	1362	if (value.HasValue) {
moel@130	1363	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1364	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1365	ActivateSensor(sensor);
moel@130	1366	}
moel@130	1367	}
moel@130	1368
moel@130	1369	foreach (Sensor sensor in temperatures) {
moel@228	1370	float? value = readTemperature(sensor.Index);
moel@130	1371	if (value.HasValue) {
moel@130	1372	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1373	ActivateSensor(sensor);
moel@130	1374	}
moel@130	1375	}
moel@130	1376
moel@130	1377	foreach (Sensor sensor in fans) {
moel@228	1378	float? value = readFan(sensor.Index);
moel@130	1379	if (value.HasValue) {
moel@130	1380	sensor.Value = value;
moel@130	1381	if (value.Value > 0)
moel@130	1382	ActivateSensor(sensor);
moel@130	1383	}
moel@130	1384	}
moel@228	1385
moel@323	1386	foreach (Sensor sensor in controls) {
moel@323	1387	float? value = readControl(sensor.Index);
moel@389	1388	sensor.Value = value;
moel@323	1389	}
moel@323	1390
moel@228	1391	postUpdate();
moel@130	1392	}
moel@130	1393
moel@323	1394	public override void Close() {
moel@323	1395	foreach (Sensor sensor in controls) {
moel@323	1396	// restore all controls back to default
moel@323	1397	superIO.SetControl(sensor.Index, null);
moel@323	1398	}
moel@323	1399	base.Close();
moel@323	1400	}
moel@323	1401
moel@130	1402	private class Voltage {
moel@130	1403	public readonly string Name;
moel@130	1404	public readonly int Index;
moel@130	1405	public readonly float Ri;
moel@130	1406	public readonly float Rf;
moel@130	1407	public readonly float Vf;
moel@130	1408	public readonly bool Hidden;
moel@130	1409
moel@202	1410	public Voltage(string name, int index) :
moel@202	1411	this(name, index, false) { }
moel@202	1412
moel@130	1413	public Voltage(string name, int index, bool hidden) :
moel@130	1414	this(name, index, 0, 1, 0, hidden) { }
moel@202	1415
moel@202	1416	public Voltage(string name, int index, float ri, float rf) :
moel@202	1417	this(name, index, ri, rf, 0, false) { }
moel@202	1418
moel@202	1419	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1420
moel@195	1421	public Voltage(string name, int index,
moel@202	1422	float ri, float rf, float vf, bool hidden)
moel@195	1423	{
moel@130	1424	this.Name = name;
moel@130	1425	this.Index = index;
moel@130	1426	this.Ri = ri;
moel@130	1427	this.Rf = rf;
moel@130	1428	this.Vf = vf;
moel@130	1429	this.Hidden = hidden;
moel@130	1430	}
moel@130	1431	}
moel@130	1432
moel@130	1433	private class Temperature {
moel@130	1434	public readonly string Name;
moel@130	1435	public readonly int Index;
moel@130	1436
moel@167	1437	public Temperature(string name, int index) {
moel@130	1438	this.Name = name;
moel@130	1439	this.Index = index;
moel@130	1440	}
moel@130	1441	}
moel@130	1442
moel@130	1443	private class Fan {
moel@130	1444	public readonly string Name;
moel@130	1445	public readonly int Index;
moel@130	1446
moel@130	1447	public Fan(string name, int index) {
moel@130	1448	this.Name = name;
moel@130	1449	this.Index = index;
moel@130	1450	}
moel@130	1451	}
moel@323	1452
moel@323	1453	private class Ctrl {
moel@323	1454	public readonly string Name;
moel@323	1455	public readonly int Index;
moel@323	1456
moel@323	1457	public Ctrl(string name, int index) {
moel@323	1458	this.Name = name;
moel@323	1459	this.Index = index;
moel@323	1460	}
moel@323	1461	}
moel@130	1462	}
moel@130	1463	}

author	moel.mich
	Tue, 30 Dec 2014 21:04:54 +0000
changeset 430	6b24e39f1b84
parent 416	f117373bd190
permissions	-rw-r--r--