OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@6b24e39f1b84

     1 /*

     3   This Source Code Form is subject to the terms of the Mozilla Public

     4   License, v. 2.0. If a copy of the MPL was not distributed with this

     5   file, You can obtain one at http://mozilla.org/MPL/2.0/.

     7   Copyright (C) 2009-2014 Michael Möller <mmoeller@openhardwaremonitor.org>

     9 */

    11 using System;

    12 using System.Collections.Generic;

    13 using System.Threading;

    14 using OpenHardwareMonitor.Hardware.LPC;

    16 namespace OpenHardwareMonitor.Hardware.Mainboard {

    17   internal sealed class SuperIOHardware : Hardware {

    19     private readonly Mainboard mainboard;

    20     private readonly ISuperIO superIO;

    22     private readonly List<Sensor> voltages = new List<Sensor>();

    23     private readonly List<Sensor> temperatures = new List<Sensor>();

    24     private readonly List<Sensor> fans = new List<Sensor>();

    25     private readonly List<Sensor> controls = new List<Sensor>();

    27     private delegate float? ReadValueDelegate(int index);

    28     private delegate void UpdateDelegate();

    30     // delegates for mainboard specific sensor reading code

    31     private readonly ReadValueDelegate readVoltage;

    32     private readonly ReadValueDelegate readTemperature;

    33     private readonly ReadValueDelegate readFan;

    34     private readonly ReadValueDelegate readControl;

    36     // delegate for post update mainboard specific code

    37     private readonly UpdateDelegate postUpdate;

    39     // mainboard specific mutex

    40     private readonly Mutex mutex;

    42     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,

    43       Manufacturer manufacturer, Model model, ISettings settings)

    44       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",

    45         superIO.Chip.ToString().ToLowerInvariant()), settings)

    46     {

    47       this.mainboard = mainboard;

    48       this.superIO = superIO;

    50       IList<Voltage> v;

    51       IList<Temperature> t;

    52       IList<Fan> f;

    53       IList<Ctrl> c;

    54       GetBoardSpecificConfiguration(superIO, manufacturer, model,

    55         out v, out t, out f, out c,

    56         out readVoltage, out readTemperature, out readFan, out readControl,

    57         out postUpdate, out mutex);

    59       CreateVoltageSensors(superIO, settings, v);

    60       CreateTemperatureSensors(superIO, settings, t);

    61       CreateFanSensors(superIO, settings, f);

    62       CreateControlSensors(superIO, settings, c);

    63     }

    65     private void CreateControlSensors(ISuperIO superIO, ISettings settings,

    66       IList<Ctrl> c)

    67     {

    68       foreach (Ctrl ctrl in c) {

    69         int index = ctrl.Index;

    70         if (index < superIO.Controls.Length) {

    71           Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,

    72             this, settings);

    73           Control control = new Control(sensor, settings, 0, 100);

    74           control.ControlModeChanged += (cc) => {

    75             switch (cc.ControlMode) {

    76               case ControlMode.Undefined:

    77                 return;

    78               case ControlMode.Default:

    79                 superIO.SetControl(index, null);

    80                 break;

    81               case ControlMode.Software:

    82                 superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));

    83                 break;

    84               default:

    85                 return;

    86             }

    87           };

    88           control.SoftwareControlValueChanged += (cc) => {

    89             if (cc.ControlMode == ControlMode.Software)

    90               superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));

    91           };

    93           switch (control.ControlMode) {

    94             case ControlMode.Undefined:

    95               break;

    96             case ControlMode.Default:

    97               superIO.SetControl(index, null);

    98               break;

    99             case ControlMode.Software:

   100               superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));

   101               break;

   102             default:

   103               break;

   104           }

   106           sensor.Control = control;

   107           controls.Add(sensor);

   108           ActivateSensor(sensor);

   109         }

   110       }

   111     }

   113     private void CreateFanSensors(ISuperIO superIO, ISettings settings,

   114       IList<Fan> f)

   115     {

   116       foreach (Fan fan in f) {

   117         if (fan.Index < superIO.Fans.Length) {

   118           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   119             this, settings);

   120           fans.Add(sensor);

   121         }

   122       }

   123     }

   125     private void CreateTemperatureSensors(ISuperIO superIO, ISettings settings,

   126       IList<Temperature> t)

   127     {

   128       foreach (Temperature temperature in t)

   129         if (temperature.Index < superIO.Temperatures.Length) {

   130           Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   131             SensorType.Temperature, this, new[] {

   132           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   133         }, settings);

   134           temperatures.Add(sensor);

   135         }

   136     }

   138     private void CreateVoltageSensors(ISuperIO superIO, ISettings settings,

   139       IList<Voltage> v)

   140     {

   141       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   142       foreach (Voltage voltage in v)

   143         if (voltage.Index < superIO.Voltages.Length) {

   144           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   145             voltage.Hidden, SensorType.Voltage, this, new[] {

   146             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   147               formula, voltage.Ri),

   148             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   149               formula, voltage.Rf),

   150             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   151               formula, voltage.Vf)

   152             }, settings);

   153           voltages.Add(sensor);

   154         }

   155     }

   157     private static void GetBoardSpecificConfiguration(ISuperIO superIO,

   158       Manufacturer manufacturer, Model model, out IList<Voltage> v,

   159       out IList<Temperature> t, out IList<Fan> f, out IList<Ctrl> c,

   160       out ReadValueDelegate readVoltage,

   161       out ReadValueDelegate readTemperature,

   162       out ReadValueDelegate readFan,

   163       out ReadValueDelegate readControl,

   164       out UpdateDelegate postUpdate, out Mutex mutex) {

   165       readVoltage = (index) => superIO.Voltages[index];

   166       readTemperature = (index) => superIO.Temperatures[index];

   167       readFan = (index) => superIO.Fans[index];

   168       readControl = (index) => superIO.Controls[index];

   170       postUpdate = () => { };

   171       mutex = null;

   173       v = new List<Voltage>();

   174       t = new List<Temperature>();

   175       f = new List<Fan>();

   176       c = new List<Ctrl>();

   178       switch (superIO.Chip) {

   179         case Chip.IT8705F:

   180         case Chip.IT8712F:

   181         case Chip.IT8716F:

   182         case Chip.IT8718F:

   183         case Chip.IT8720F:

   184         case Chip.IT8726F:

   185           GetITEConfigurationsA(superIO, manufacturer, model, v, t, f, c,

   186             ref readFan, ref postUpdate, ref mutex);

   187           break;

   189         case Chip.IT8721F:

   190         case Chip.IT8728F:

   191         case Chip.IT8771E:

   192         case Chip.IT8772E:

   193           GetITEConfigurationsB(superIO, manufacturer, model, v, t, f, c);

   194           break;

   196         case Chip.F71858:

   197           v.Add(new Voltage("VCC3V", 0, 150, 150));

   198           v.Add(new Voltage("VSB3V", 1, 150, 150));

   199           v.Add(new Voltage("Battery", 2, 150, 150));

   200           for (int i = 0; i < superIO.Temperatures.Length; i++)

   201             t.Add(new Temperature("Temperature #" + (i + 1), i));

   202           for (int i = 0; i < superIO.Fans.Length; i++)

   203             f.Add(new Fan("Fan #" + (i + 1), i));

   204           break;

   205         case Chip.F71862:

   206         case Chip.F71869:

   207         case Chip.F71869A:

   208         case Chip.F71882:

   209         case Chip.F71889AD:

   210         case Chip.F71889ED:

   211         case Chip.F71889F:

   212         case Chip.F71808E:

   213           GetFintekConfiguration(superIO, manufacturer, model, v, t, f);

   214           break;

   216         case Chip.W83627EHF:

   217           GetWinbondConfigurationEHF(manufacturer, model, v, t, f);

   218           break;

   219         case Chip.W83627DHG:

   220         case Chip.W83627DHGP:

   221         case Chip.W83667HG:

   222         case Chip.W83667HGB:

   223           GetWinbondConfigurationHG(manufacturer, model, v, t, f);

   224           break;

   225         case Chip.W83627HF:

   226         case Chip.W83627THF:

   227         case Chip.W83687THF:

   228           v.Add(new Voltage("CPU VCore", 0));

   229           v.Add(new Voltage("Voltage #2", 1, true));

   230           v.Add(new Voltage("Voltage #3", 2, true));

   231           v.Add(new Voltage("AVCC", 3, 34, 51));

   232           v.Add(new Voltage("Voltage #5", 4, true));

   233           v.Add(new Voltage("5VSB", 5, 34, 51));

   234           v.Add(new Voltage("VBAT", 6));

   235           t.Add(new Temperature("CPU", 0));

   236           t.Add(new Temperature("Auxiliary", 1));

   237           t.Add(new Temperature("System", 2));

   238           f.Add(new Fan("System Fan", 0));

   239           f.Add(new Fan("CPU Fan", 1));

   240           f.Add(new Fan("Auxiliary Fan", 2));

   241           break;

   242         case Chip.NCT6771F:

   243         case Chip.NCT6776F:

   244           GetNuvotonConfigurationF(superIO, manufacturer, model, v, t, f, c);

   245           break;

   246         case Chip.NCT6779D:

   247         case Chip.NCT6791D:

   248           GetNuvotonConfigurationD(superIO, manufacturer, model, v, t, f, c);

   249           break;

   250         default:

   251           GetDefaultConfiguration(superIO, v, t, f, c);

   252           break;

   253       }

   254     }

   256     private static void GetDefaultConfiguration(ISuperIO superIO,

   257       IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)

   258     {

   259       for (int i = 0; i < superIO.Voltages.Length; i++)

   260         v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   261       for (int i = 0; i < superIO.Temperatures.Length; i++)

   262         t.Add(new Temperature("Temperature #" + (i + 1), i));

   263       for (int i = 0; i < superIO.Fans.Length; i++)

   264         f.Add(new Fan("Fan #" + (i + 1), i));

   265       for (int i = 0; i < superIO.Controls.Length; i++)

   266         c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   267     }

   269     private static void GetITEConfigurationsA(ISuperIO superIO,

   270       Manufacturer manufacturer, Model model,

   271       IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c,

   272       ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,

   273       ref Mutex mutex)

   274     {

   275       switch (manufacturer) {

   276         case Manufacturer.ASUS:

   277           switch (model) {

   278             case Model.Crosshair_III_Formula: // IT8720F

   279               v.Add(new Voltage("VBat", 8));

   280               t.Add(new Temperature("CPU", 0));

   281               for (int i = 0; i < superIO.Fans.Length; i++)

   282                 f.Add(new Fan("Fan #" + (i + 1), i));

   283               break;

   284             case Model.M2N_SLI_DELUXE:

   285               v.Add(new Voltage("CPU VCore", 0));

   286               v.Add(new Voltage("+3.3V", 1));

   287               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   288               v.Add(new Voltage("+12V", 4, 30, 10));

   289               v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   290               v.Add(new Voltage("VBat", 8));

   291               t.Add(new Temperature("CPU", 0));

   292               t.Add(new Temperature("Motherboard", 1));

   293               f.Add(new Fan("CPU Fan", 0));

   294               f.Add(new Fan("Chassis Fan #1", 1));

   295               f.Add(new Fan("Power Fan", 2));

   296               break;

   297             case Model.M4A79XTD_EVO: // IT8720F

   298               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   299               v.Add(new Voltage("VBat", 8));

   300               t.Add(new Temperature("CPU", 0));

   301               t.Add(new Temperature("Motherboard", 1));

   302               f.Add(new Fan("CPU Fan", 0));

   303               f.Add(new Fan("Chassis Fan #1", 1));

   304               f.Add(new Fan("Chassis Fan #2", 2));

   305               break;

   306             default:

   307               v.Add(new Voltage("CPU VCore", 0));

   308               v.Add(new Voltage("Voltage #2", 1, true));

   309               v.Add(new Voltage("Voltage #3", 2, true));

   310               v.Add(new Voltage("Voltage #4", 3, true));

   311               v.Add(new Voltage("Voltage #5", 4, true));

   312               v.Add(new Voltage("Voltage #6", 5, true));

   313               v.Add(new Voltage("Voltage #7", 6, true));

   314               v.Add(new Voltage("Voltage #8", 7, true));

   315               v.Add(new Voltage("VBat", 8));

   316               for (int i = 0; i < superIO.Temperatures.Length; i++)

   317                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   318               for (int i = 0; i < superIO.Fans.Length; i++)

   319                 f.Add(new Fan("Fan #" + (i + 1), i));

   320               for (int i = 0; i < superIO.Controls.Length; i++)

   321                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   322               break;

   323           }

   324           break;

   326         case Manufacturer.ASRock:

   327           switch (model) {

   328             case Model.P55_Deluxe: // IT8720F

   329               GetASRockConfiguration(superIO, v, t, f,

   330                 ref readFan, ref postUpdate, ref mutex);

   331               break;

   332             default:

   333               v.Add(new Voltage("CPU VCore", 0));

   334               v.Add(new Voltage("Voltage #2", 1, true));

   335               v.Add(new Voltage("Voltage #3", 2, true));

   336               v.Add(new Voltage("Voltage #4", 3, true));

   337               v.Add(new Voltage("Voltage #5", 4, true));

   338               v.Add(new Voltage("Voltage #6", 5, true));

   339               v.Add(new Voltage("Voltage #7", 6, true));

   340               v.Add(new Voltage("Voltage #8", 7, true));

   341               v.Add(new Voltage("VBat", 8));

   342               for (int i = 0; i < superIO.Temperatures.Length; i++)

   343                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   344               for (int i = 0; i < superIO.Fans.Length; i++)

   345                 f.Add(new Fan("Fan #" + (i + 1), i));

   346               break;

   347           };

   348           break;

   350         case Manufacturer.DFI:

   351           switch (model) {

   352             case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   353               v.Add(new Voltage("CPU VCore", 0));

   354               v.Add(new Voltage("FSB VTT", 1));

   355               v.Add(new Voltage("+3.3V", 2));

   356               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   357               v.Add(new Voltage("+12V", 4, 30, 10));

   358               v.Add(new Voltage("NB Core", 5));

   359               v.Add(new Voltage("VDIMM", 6));

   360               v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   361               v.Add(new Voltage("VBat", 8));

   362               t.Add(new Temperature("CPU", 0));

   363               t.Add(new Temperature("System", 1));

   364               t.Add(new Temperature("Chipset", 2));

   365               f.Add(new Fan("Fan #1", 0));

   366               f.Add(new Fan("Fan #2", 1));

   367               f.Add(new Fan("Fan #3", 2));

   368               break;

   369             case Model.LP_DK_P55_T3eH9: // IT8720F

   370               v.Add(new Voltage("CPU VCore", 0));

   371               v.Add(new Voltage("VTT", 1));

   372               v.Add(new Voltage("+3.3V", 2));

   373               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   374               v.Add(new Voltage("+12V", 4, 30, 10));

   375               v.Add(new Voltage("CPU PLL", 5));

   376               v.Add(new Voltage("DRAM", 6));

   377               v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   378               v.Add(new Voltage("VBat", 8));

   379               t.Add(new Temperature("Chipset", 0));

   380               t.Add(new Temperature("CPU PWM", 1));

   381               t.Add(new Temperature("CPU", 2));

   382               f.Add(new Fan("Fan #1", 0));

   383               f.Add(new Fan("Fan #2", 1));

   384               f.Add(new Fan("Fan #3", 2));

   385               break;

   386             default:

   387               v.Add(new Voltage("CPU VCore", 0));

   388               v.Add(new Voltage("VTT", 1, true));

   389               v.Add(new Voltage("+3.3V", 2, true));

   390               v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   391               v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   392               v.Add(new Voltage("Voltage #6", 5, true));

   393               v.Add(new Voltage("DRAM", 6, true));

   394               v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   395               v.Add(new Voltage("VBat", 8));

   396               for (int i = 0; i < superIO.Temperatures.Length; i++)

   397                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   398               for (int i = 0; i < superIO.Fans.Length; i++)

   399                 f.Add(new Fan("Fan #" + (i + 1), i));

   400               for (int i = 0; i < superIO.Controls.Length; i++)

   401                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   402               break;

   403           }

   404           break;

   406         case Manufacturer.Gigabyte:

   407           switch (model) {

   408             case Model._965P_S3: // IT8718F

   409               v.Add(new Voltage("CPU VCore", 0));

   410               v.Add(new Voltage("DRAM", 1));

   411               v.Add(new Voltage("+3.3V", 2));

   412               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   413               v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   414               v.Add(new Voltage("VBat", 8));

   415               t.Add(new Temperature("System", 0));

   416               t.Add(new Temperature("CPU", 1));

   417               f.Add(new Fan("CPU Fan", 0));

   418               f.Add(new Fan("System Fan", 1));

   419               break;

   420             case Model.EP45_DS3R: // IT8718F

   421             case Model.EP45_UD3R:

   422             case Model.X38_DS5:

   423               v.Add(new Voltage("CPU VCore", 0));

   424               v.Add(new Voltage("DRAM", 1));

   425               v.Add(new Voltage("+3.3V", 2));

   426               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   427               v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   428               v.Add(new Voltage("VBat", 8));

   429               t.Add(new Temperature("System", 0));

   430               t.Add(new Temperature("CPU", 1));

   431               f.Add(new Fan("CPU Fan", 0));

   432               f.Add(new Fan("System Fan #2", 1));

   433               f.Add(new Fan("Power Fan", 2));

   434               f.Add(new Fan("System Fan #1", 3));

   435               break;

   436             case Model.EX58_EXTREME: // IT8720F

   437               v.Add(new Voltage("CPU VCore", 0));

   438               v.Add(new Voltage("DRAM", 1));

   439               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   440               v.Add(new Voltage("VBat", 8));

   441               t.Add(new Temperature("System", 0));

   442               t.Add(new Temperature("CPU", 1));

   443               t.Add(new Temperature("Northbridge", 2));

   444               f.Add(new Fan("CPU Fan", 0));

   445               f.Add(new Fan("System Fan #2", 1));

   446               f.Add(new Fan("Power Fan", 2));

   447               f.Add(new Fan("System Fan #1", 3));

   448               break;

   449             case Model.P35_DS3: // IT8718F

   450             case Model.P35_DS3L: // IT8718F

   451               v.Add(new Voltage("CPU VCore", 0));

   452               v.Add(new Voltage("DRAM", 1));

   453               v.Add(new Voltage("+3.3V", 2));

   454               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   455               v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   456               v.Add(new Voltage("VBat", 8));

   457               t.Add(new Temperature("System", 0));

   458               t.Add(new Temperature("CPU", 1));

   459               f.Add(new Fan("CPU Fan", 0));

   460               f.Add(new Fan("System Fan #1", 1));

   461               f.Add(new Fan("System Fan #2", 2));

   462               f.Add(new Fan("Power Fan", 3));

   463               break;

   464             case Model.P55_UD4: // IT8720F

   465             case Model.P55A_UD3: // IT8720F

   466             case Model.P55M_UD4: // IT8720F

   467             case Model.H55_USB3: // IT8720F

   468             case Model.EX58_UD3R: // IT8720F

   469               v.Add(new Voltage("CPU VCore", 0));

   470               v.Add(new Voltage("DRAM", 1));

   471               v.Add(new Voltage("+3.3V", 2));

   472               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   473               v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   474               v.Add(new Voltage("VBat", 8));

   475               t.Add(new Temperature("System", 0));

   476               t.Add(new Temperature("CPU", 2));

   477               f.Add(new Fan("CPU Fan", 0));

   478               f.Add(new Fan("System Fan #2", 1));

   479               f.Add(new Fan("Power Fan", 2));

   480               f.Add(new Fan("System Fan #1", 3));

   481               break;

   482             case Model.H55N_USB3: // IT8720F

   483               v.Add(new Voltage("CPU VCore", 0));

   484               v.Add(new Voltage("DRAM", 1));

   485               v.Add(new Voltage("+3.3V", 2));

   486               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   487               v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   488               v.Add(new Voltage("VBat", 8));

   489               t.Add(new Temperature("System", 0));

   490               t.Add(new Temperature("CPU", 2));

   491               f.Add(new Fan("CPU Fan", 0));

   492               f.Add(new Fan("System Fan", 1));

   493               break;

   494             case Model.G41M_Combo: // IT8718F

   495             case Model.G41MT_S2: // IT8718F

   496             case Model.G41MT_S2P: // IT8718F

   497               v.Add(new Voltage("CPU VCore", 0));

   498               v.Add(new Voltage("DRAM", 1));

   499               v.Add(new Voltage("+3.3V", 2));

   500               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   501               v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   502               v.Add(new Voltage("VBat", 8));

   503               t.Add(new Temperature("CPU", 2));

   504               f.Add(new Fan("CPU Fan", 0));

   505               f.Add(new Fan("System Fan", 1));

   506               break;

   507             case Model.GA_970A_UD3: // IT8720F

   508               v.Add(new Voltage("CPU VCore", 0));

   509               v.Add(new Voltage("DRAM", 1));

   510               v.Add(new Voltage("+3.3V", 2));

   511               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   512               v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   513               v.Add(new Voltage("VBat", 8));

   514               t.Add(new Temperature("System", 0));

   515               t.Add(new Temperature("CPU", 1));

   516               f.Add(new Fan("CPU Fan", 0));

   517               f.Add(new Fan("System Fan #1", 1));

   518               f.Add(new Fan("System Fan #2", 2));

   519               f.Add(new Fan("Power Fan", 4));

   520               c.Add(new Ctrl("PWM 1", 0));

   521               c.Add(new Ctrl("PWM 2", 1));

   522               c.Add(new Ctrl("PWM 3", 2));

   523               break;

   524             case Model.GA_MA770T_UD3: // IT8720F

   525             case Model.GA_MA770T_UD3P: // IT8720F

   526             case Model.GA_MA790X_UD3P: // IT8720F

   527               v.Add(new Voltage("CPU VCore", 0));

   528               v.Add(new Voltage("DRAM", 1));

   529               v.Add(new Voltage("+3.3V", 2));

   530               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   531               v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   532               v.Add(new Voltage("VBat", 8));

   533               t.Add(new Temperature("System", 0));

   534               t.Add(new Temperature("CPU", 1));

   535               f.Add(new Fan("CPU Fan", 0));

   536               f.Add(new Fan("System Fan #1", 1));

   537               f.Add(new Fan("System Fan #2", 2));

   538               f.Add(new Fan("Power Fan", 3));

   539               break;

   540             case Model.GA_MA78LM_S2H: // IT8718F

   541               v.Add(new Voltage("CPU VCore", 0));

   542               v.Add(new Voltage("DRAM", 1));

   543               v.Add(new Voltage("+3.3V", 2));

   544               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   545               v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   546               v.Add(new Voltage("VBat", 8));

   547               t.Add(new Temperature("System", 0));

   548               t.Add(new Temperature("CPU", 1));

   549               t.Add(new Temperature("VRM", 2));

   550               f.Add(new Fan("CPU Fan", 0));

   551               f.Add(new Fan("System Fan #1", 1));

   552               f.Add(new Fan("System Fan #2", 2));

   553               f.Add(new Fan("Power Fan", 3));

   554               break;

   555             case Model.GA_MA785GM_US2H: // IT8718F

   556             case Model.GA_MA785GMT_UD2H: // IT8718F

   557               v.Add(new Voltage("CPU VCore", 0));

   558               v.Add(new Voltage("DRAM", 1));

   559               v.Add(new Voltage("+3.3V", 2));

   560               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   561               v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   562               v.Add(new Voltage("VBat", 8));

   563               t.Add(new Temperature("System", 0));

   564               t.Add(new Temperature("CPU", 1));

   565               f.Add(new Fan("CPU Fan", 0));

   566               f.Add(new Fan("System Fan", 1));

   567               f.Add(new Fan("NB Fan", 2));

   568               break;

   569             case Model.X58A_UD3R: // IT8720F

   570               v.Add(new Voltage("CPU VCore", 0));

   571               v.Add(new Voltage("DRAM", 1));

   572               v.Add(new Voltage("+3.3V", 2));

   573               v.Add(new Voltage("+5V", 3, 6.8f, 10));

   574               v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   575               v.Add(new Voltage("VBat", 8));

   576               t.Add(new Temperature("System", 0));

   577               t.Add(new Temperature("CPU", 1));

   578               t.Add(new Temperature("Northbridge", 2));

   579               f.Add(new Fan("CPU Fan", 0));

   580               f.Add(new Fan("System Fan #2", 1));

   581               f.Add(new Fan("Power Fan", 2));

   582               f.Add(new Fan("System Fan #1", 3));

   583               break;

   584             default:

   585               v.Add(new Voltage("CPU VCore", 0));

   586               v.Add(new Voltage("DRAM", 1, true));

   587               v.Add(new Voltage("+3.3V", 2, true));

   588               v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   589               v.Add(new Voltage("Voltage #5", 4, true));

   590               v.Add(new Voltage("Voltage #6", 5, true));

   591               v.Add(new Voltage("Voltage #7", 6, true));

   592               v.Add(new Voltage("Voltage #8", 7, true));

   593               v.Add(new Voltage("VBat", 8));

   594               for (int i = 0; i < superIO.Temperatures.Length; i++)

   595                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   596               for (int i = 0; i < superIO.Fans.Length; i++)

   597                 f.Add(new Fan("Fan #" + (i + 1), i));

   598               for (int i = 0; i < superIO.Controls.Length; i++)

   599                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   600               break;

   601           }

   602           break;

   604         default:

   605           v.Add(new Voltage("CPU VCore", 0));

   606           v.Add(new Voltage("Voltage #2", 1, true));

   607           v.Add(new Voltage("Voltage #3", 2, true));

   608           v.Add(new Voltage("Voltage #4", 3, true));

   609           v.Add(new Voltage("Voltage #5", 4, true));

   610           v.Add(new Voltage("Voltage #6", 5, true));

   611           v.Add(new Voltage("Voltage #7", 6, true));

   612           v.Add(new Voltage("Voltage #8", 7, true));

   613           v.Add(new Voltage("VBat", 8));

   614           for (int i = 0; i < superIO.Temperatures.Length; i++)

   615             t.Add(new Temperature("Temperature #" + (i + 1), i));

   616           for (int i = 0; i < superIO.Fans.Length; i++)

   617             f.Add(new Fan("Fan #" + (i + 1), i));

   618           for (int i = 0; i < superIO.Controls.Length; i++)

   619             c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   620           break;

   621       }

   622     }

   624     private static void GetASRockConfiguration(ISuperIO superIO,

   625       IList<Voltage> v, IList<Temperature> t, IList<Fan> f,

   626       ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,

   627       ref Mutex mutex)

   628     {

   629       v.Add(new Voltage("CPU VCore", 0));

   630       v.Add(new Voltage("+3.3V", 2));

   631       v.Add(new Voltage("+12V", 4, 30, 10));

   632       v.Add(new Voltage("+5V", 5, 6.8f, 10));

   633       v.Add(new Voltage("VBat", 8));

   634       t.Add(new Temperature("CPU", 0));

   635       t.Add(new Temperature("Motherboard", 1));

   636       f.Add(new Fan("CPU Fan", 0));

   637       f.Add(new Fan("Chassis Fan #1", 1));

   639       // this mutex is also used by the official ASRock tool

   640       mutex = new Mutex(false, "ASRockOCMark");

   642       bool exclusiveAccess = false;

   643       try {

   644         exclusiveAccess = mutex.WaitOne(10, false);

   645       } catch (AbandonedMutexException) { }

   646         catch (InvalidOperationException) { }

   648       // only read additional fans if we get exclusive access

   649       if (exclusiveAccess) {

   651         f.Add(new Fan("Chassis Fan #2", 2));

   652         f.Add(new Fan("Chassis Fan #3", 3));

   653         f.Add(new Fan("Power Fan", 4));

   655         readFan = (index) => {

   656           if (index < 2) {

   657             return superIO.Fans[index];

   658           } else {

   659             // get GPIO 80-87

   660             byte? gpio = superIO.ReadGPIO(7);

   661             if (!gpio.HasValue)

   662               return null;

   664             // read the last 3 fans based on GPIO 83-85

   665             int[] masks = { 0x05, 0x03, 0x06 };

   666             return (((gpio.Value >> 3) & 0x07) ==

   667               masks[index - 2]) ? superIO.Fans[2] : null;

   668           }

   669         };

   671         int fanIndex = 0;

   672         postUpdate = () => {

   673           // get GPIO 80-87

   674           byte? gpio = superIO.ReadGPIO(7);

   675           if (!gpio.HasValue)

   676             return;

   678           // prepare the GPIO 83-85 for the next update

   679           int[] masks = { 0x05, 0x03, 0x06 };

   680           superIO.WriteGPIO(7,

   681             (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));

   682           fanIndex = (fanIndex + 1) % 3;

   683         };

   684       }

   685     }

   687     private static void GetITEConfigurationsB(ISuperIO superIO,

   688       Manufacturer manufacturer, Model model,

   689       IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)

   690     {

   691       switch (manufacturer) {

   692         case Manufacturer.ECS:

   693           switch (model) {

   694             case Model.A890GXM_A: // IT8721F

   695               v.Add(new Voltage("CPU VCore", 0));

   696               v.Add(new Voltage("VDIMM", 1));

   697               v.Add(new Voltage("NB Voltage", 2));

   698               v.Add(new Voltage("Analog +3.3V", 3, 10, 10));

   699               // v.Add(new Voltage("VDIMM", 6, true));

   700               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   701               v.Add(new Voltage("VBat", 8, 10, 10));

   702               t.Add(new Temperature("CPU", 0));

   703               t.Add(new Temperature("System", 1));

   704               t.Add(new Temperature("Northbridge", 2));

   705               f.Add(new Fan("CPU Fan", 0));

   706               f.Add(new Fan("System Fan", 1));

   707               f.Add(new Fan("Power Fan", 2));

   708               break;

   709             default:

   710               v.Add(new Voltage("Voltage #1", 0, true));

   711               v.Add(new Voltage("Voltage #2", 1, true));

   712               v.Add(new Voltage("Voltage #3", 2, true));

   713               v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   714               v.Add(new Voltage("Voltage #5", 4, true));

   715               v.Add(new Voltage("Voltage #6", 5, true));

   716               v.Add(new Voltage("Voltage #7", 6, true));

   717               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   718               v.Add(new Voltage("VBat", 8, 10, 10));

   719               for (int i = 0; i < superIO.Temperatures.Length; i++)

   720                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   721               for (int i = 0; i < superIO.Fans.Length; i++)

   722                 f.Add(new Fan("Fan #" + (i + 1), i));

   723               for (int i = 0; i < superIO.Controls.Length; i++)

   724                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   725               break;

   726           }

   727           break;

   728         case Manufacturer.Gigabyte:

   729           switch (model) {

   730             case Model.H61M_DS2_REV_1_2: // IT8728F

   731             case Model.H61M_USB3_B3_REV_2_0: // IT8728F

   732               v.Add(new Voltage("VTT", 0));

   733               v.Add(new Voltage("+12V", 2, 30.9f, 10));

   734               v.Add(new Voltage("CPU VCore", 5));

   735               v.Add(new Voltage("DRAM", 6));

   736               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   737               v.Add(new Voltage("VBat", 8, 10, 10));

   738               t.Add(new Temperature("System", 0));

   739               t.Add(new Temperature("CPU", 2));

   740               f.Add(new Fan("CPU Fan", 0));

   741               f.Add(new Fan("System Fan", 1));

   742               break;

   743             case Model.H67A_UD3H_B3: // IT8728F

   744             case Model.H67A_USB3_B3: // IT8728F

   745               v.Add(new Voltage("VTT", 0));

   746               v.Add(new Voltage("+5V", 1, 15, 10));

   747               v.Add(new Voltage("+12V", 2, 30.9f, 10));

   748               v.Add(new Voltage("CPU VCore", 5));

   749               v.Add(new Voltage("DRAM", 6));

   750               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   751               v.Add(new Voltage("VBat", 8, 10, 10));

   752               t.Add(new Temperature("System", 0));

   753               t.Add(new Temperature("CPU", 2));

   754               f.Add(new Fan("CPU Fan", 0));

   755               f.Add(new Fan("System Fan #1", 1));

   756               f.Add(new Fan("Power Fan", 2));

   757               f.Add(new Fan("System Fan #2", 3));

   758               break;

   759             case Model.Z68A_D3H_B3: // IT8728F

   760               v.Add(new Voltage("VTT", 0));

   761               v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   762               v.Add(new Voltage("+12V", 2, 30.9f, 10));

   763               v.Add(new Voltage("+5V", 3, 7.15f, 10));

   764               v.Add(new Voltage("CPU VCore", 5));

   765               v.Add(new Voltage("DRAM", 6));

   766               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   767               v.Add(new Voltage("VBat", 8, 10, 10));

   768               t.Add(new Temperature("System", 0));

   769               t.Add(new Temperature("CPU", 2));

   770               f.Add(new Fan("CPU Fan", 0));

   771               f.Add(new Fan("System Fan #1", 1));

   772               f.Add(new Fan("Power Fan", 2));

   773               f.Add(new Fan("System Fan #2", 3));

   774               break;

   775             case Model.P67A_UD3_B3: // IT8728F

   776             case Model.P67A_UD3R_B3: // IT8728F

   777             case Model.P67A_UD4_B3: // IT8728F

   778             case Model.Z68AP_D3: // IT8728F

   779             case Model.Z68X_UD3H_B3: // IT8728F

   780               v.Add(new Voltage("VTT", 0));

   781               v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   782               v.Add(new Voltage("+12V", 2, 30.9f, 10));

   783               v.Add(new Voltage("+5V", 3, 7.15f, 10));

   784               v.Add(new Voltage("CPU VCore", 5));

   785               v.Add(new Voltage("DRAM", 6));

   786               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   787               v.Add(new Voltage("VBat", 8, 10, 10));

   788               t.Add(new Temperature("System", 0));

   789               t.Add(new Temperature("CPU", 2));

   790               f.Add(new Fan("CPU Fan", 0));

   791               f.Add(new Fan("System Fan #2", 1));

   792               f.Add(new Fan("Power Fan", 2));

   793               f.Add(new Fan("System Fan #1", 3));

   794               break;

   795             case Model.Z68X_UD7_B3: // IT8728F

   796               v.Add(new Voltage("VTT", 0));

   797               v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   798               v.Add(new Voltage("+12V", 2, 30.9f, 10));

   799               v.Add(new Voltage("+5V", 3, 7.15f, 10));

   800               v.Add(new Voltage("CPU VCore", 5));

   801               v.Add(new Voltage("DRAM", 6));

   802               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   803               v.Add(new Voltage("VBat", 8, 10, 10));

   804               t.Add(new Temperature("System", 0));

   805               t.Add(new Temperature("CPU", 1));

   806               t.Add(new Temperature("System 3", 2));

   807               f.Add(new Fan("CPU Fan", 0));

   808               f.Add(new Fan("Power Fan", 1));

   809               f.Add(new Fan("System Fan #1", 2));

   810               f.Add(new Fan("System Fan #2", 3));

   811               f.Add(new Fan("System Fan #3", 4));

   812               break;

   813             default:

   814               v.Add(new Voltage("Voltage #1", 0, true));

   815               v.Add(new Voltage("Voltage #2", 1, true));

   816               v.Add(new Voltage("Voltage #3", 2, true));

   817               v.Add(new Voltage("Voltage #4", 3, true));

   818               v.Add(new Voltage("Voltage #5", 4, true));

   819               v.Add(new Voltage("Voltage #6", 5, true));

   820               v.Add(new Voltage("Voltage #7", 6, true));

   821               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   822               v.Add(new Voltage("VBat", 8, 10, 10));

   823               for (int i = 0; i < superIO.Temperatures.Length; i++)

   824                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   825               for (int i = 0; i < superIO.Fans.Length; i++)

   826                 f.Add(new Fan("Fan #" + (i + 1), i));

   827               for (int i = 0; i < superIO.Controls.Length; i++)

   828                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   829               break;

   830           }

   831           break;

   832         case Manufacturer.Shuttle:

   833           switch (model) {

   834             case Model.FH67: // IT8772E

   835               v.Add(new Voltage("CPU VCore", 0));

   836               v.Add(new Voltage("DRAM", 1));

   837               v.Add(new Voltage("PCH VCCIO", 2));

   838               v.Add(new Voltage("CPU VCCIO", 3));

   839               v.Add(new Voltage("Graphic Voltage", 4));

   840               v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   841               v.Add(new Voltage("VBat", 8, 10, 10));

   842               t.Add(new Temperature("System", 0));

   843               t.Add(new Temperature("CPU", 1));

   844               f.Add(new Fan("Fan #1", 0));

   845               f.Add(new Fan("CPU Fan", 1));

   846               break;

   847             default:

   848               v.Add(new Voltage("Voltage #1", 0, true));

   849               v.Add(new Voltage("Voltage #2", 1, true));

   850               v.Add(new Voltage("Voltage #3", 2, true));

   851               v.Add(new Voltage("Voltage #4", 3, true));

   852               v.Add(new Voltage("Voltage #5", 4, true));

   853               v.Add(new Voltage("Voltage #6", 5, true));

   854               v.Add(new Voltage("Voltage #7", 6, true));

   855               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   856               v.Add(new Voltage("VBat", 8, 10, 10));

   857               for (int i = 0; i < superIO.Temperatures.Length; i++)

   858                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   859               for (int i = 0; i < superIO.Fans.Length; i++)

   860                 f.Add(new Fan("Fan #" + (i + 1), i));

   861               for (int i = 0; i < superIO.Controls.Length; i++)

   862                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   863               break;

   864           }

   865           break;

   866         default:

   867           v.Add(new Voltage("Voltage #1", 0, true));

   868           v.Add(new Voltage("Voltage #2", 1, true));

   869           v.Add(new Voltage("Voltage #3", 2, true));

   870           v.Add(new Voltage("Voltage #4", 3, true));

   871           v.Add(new Voltage("Voltage #5", 4, true));

   872           v.Add(new Voltage("Voltage #6", 5, true));

   873           v.Add(new Voltage("Voltage #7", 6, true));

   874           v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   875           v.Add(new Voltage("VBat", 8, 10, 10));

   876           for (int i = 0; i < superIO.Temperatures.Length; i++)

   877             t.Add(new Temperature("Temperature #" + (i + 1), i));

   878           for (int i = 0; i < superIO.Fans.Length; i++)

   879             f.Add(new Fan("Fan #" + (i + 1), i));

   880           for (int i = 0; i < superIO.Controls.Length; i++)

   881             c.Add(new Ctrl("Fan Control #" + (i + 1), i));

   882           break;

   883       }

   884     }

   886     private static void GetFintekConfiguration(ISuperIO superIO,

   887       Manufacturer manufacturer, Model model,

   888       IList<Voltage> v, IList<Temperature> t, IList<Fan> f)

   889     {

   890       switch (manufacturer) {

   891         case Manufacturer.EVGA:

   892           switch (model) {

   893             case Model.X58_SLI_Classified: // F71882

   894               v.Add(new Voltage("VCC3V", 0, 150, 150));

   895               v.Add(new Voltage("CPU VCore", 1, 47, 100));

   896               v.Add(new Voltage("DIMM", 2, 47, 100));

   897               v.Add(new Voltage("CPU VTT", 3, 24, 100));

   898               v.Add(new Voltage("IOH Vcore", 4, 24, 100));

   899               v.Add(new Voltage("+5V", 5, 51, 12));

   900               v.Add(new Voltage("+12V", 6, 56, 6.8f));

   901               v.Add(new Voltage("3VSB", 7, 150, 150));

   902               v.Add(new Voltage("VBat", 8, 150, 150));

   903               t.Add(new Temperature("CPU", 0));

   904               t.Add(new Temperature("VREG", 1));

   905               t.Add(new Temperature("System", 2));

   906               f.Add(new Fan("CPU Fan", 0));

   907               f.Add(new Fan("Power Fan", 1));

   908               f.Add(new Fan("Chassis Fan", 2));

   909               break;

   910             default:

   911               v.Add(new Voltage("VCC3V", 0, 150, 150));

   912               v.Add(new Voltage("CPU VCore", 1));

   913               v.Add(new Voltage("Voltage #3", 2, true));

   914               v.Add(new Voltage("Voltage #4", 3, true));

   915               v.Add(new Voltage("Voltage #5", 4, true));

   916               v.Add(new Voltage("Voltage #6", 5, true));

   917               v.Add(new Voltage("Voltage #7", 6, true));

   918               v.Add(new Voltage("VSB3V", 7, 150, 150));

   919               v.Add(new Voltage("VBat", 8, 150, 150));

   920               for (int i = 0; i < superIO.Temperatures.Length; i++)

   921                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   922               for (int i = 0; i < superIO.Fans.Length; i++)

   923                 f.Add(new Fan("Fan #" + (i + 1), i));

   924               break;

   925           }

   926           break;

   927         default:

   928           v.Add(new Voltage("VCC3V", 0, 150, 150));

   929           v.Add(new Voltage("CPU VCore", 1));

   930           v.Add(new Voltage("Voltage #3", 2, true));

   931           v.Add(new Voltage("Voltage #4", 3, true));

   932           v.Add(new Voltage("Voltage #5", 4, true));

   933           v.Add(new Voltage("Voltage #6", 5, true));

   934           if (superIO.Chip != Chip.F71808E)

   935             v.Add(new Voltage("Voltage #7", 6, true));

   936           v.Add(new Voltage("VSB3V", 7, 150, 150));

   937           v.Add(new Voltage("VBat", 8, 150, 150));

   938           for (int i = 0; i < superIO.Temperatures.Length; i++)

   939             t.Add(new Temperature("Temperature #" + (i + 1), i));

   940           for (int i = 0; i < superIO.Fans.Length; i++)

   941             f.Add(new Fan("Fan #" + (i + 1), i));

   942           break;

   943       }

   944     }

   946     private static void GetNuvotonConfigurationF(ISuperIO superIO,

   947       Manufacturer manufacturer, Model model,

   948       IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)

   949     {

   950       switch (manufacturer) {

   951         case Manufacturer.ASUS:

   952           switch (model) {

   953             case Model.P8P67: // NCT6776F

   954             case Model.P8P67_EVO: // NCT6776F

   955             case Model.P8P67_PRO: // NCT6776F

   956               v.Add(new Voltage("CPU VCore", 0));

   957               v.Add(new Voltage("+12V", 1, 11, 1));

   958               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   959               v.Add(new Voltage("+3.3V", 3, 34, 34));

   960               v.Add(new Voltage("+5V", 4, 12, 3));

   961               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   962               v.Add(new Voltage("VBAT", 8, 34, 34));

   963               t.Add(new Temperature("CPU", 0));

   964               t.Add(new Temperature("Auxiliary", 2));

   965               t.Add(new Temperature("Motherboard", 3));

   966               f.Add(new Fan("Chassis Fan #1", 0));

   967               f.Add(new Fan("CPU Fan", 1));

   968               f.Add(new Fan("Power Fan", 2));

   969               f.Add(new Fan("Chassis Fan #2", 3));

   970               c.Add(new Ctrl("Chassis Fan #2", 0));

   971               c.Add(new Ctrl("CPU Fan", 1));

   972               c.Add(new Ctrl("Chassis Fan #1", 2));

   973               break;

   974             case Model.P8P67_M_PRO: // NCT6776F

   975               v.Add(new Voltage("CPU VCore", 0));

   976               v.Add(new Voltage("+12V", 1, 11, 1));

   977               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   978               v.Add(new Voltage("+3.3V", 3, 34, 34));

   979               v.Add(new Voltage("+5V", 4, 12, 3));

   980               v.Add(new Voltage("Voltage #6", 5, true));

   981               v.Add(new Voltage("Voltage #7", 6, true));

   982               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   983               v.Add(new Voltage("VBAT", 8, 34, 34));

   984               t.Add(new Temperature("CPU", 0));

   985               t.Add(new Temperature("Motherboard", 3));

   986               f.Add(new Fan("Chassis Fan #1", 0));

   987               f.Add(new Fan("CPU Fan", 1));

   988               f.Add(new Fan("Chassis Fan #2", 2));

   989               f.Add(new Fan("Power Fan", 3));

   990               f.Add(new Fan("Auxiliary Fan", 4));

   991               break;

   992             case Model.P8Z68_V_PRO: // NCT6776F

   993               v.Add(new Voltage("CPU VCore", 0));

   994               v.Add(new Voltage("+12V", 1, 11, 1));

   995               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   996               v.Add(new Voltage("+3.3V", 3, 34, 34));

   997               v.Add(new Voltage("+5V", 4, 12, 3));

   998               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   999               v.Add(new Voltage("VBAT", 8, 34, 34));

  1000               t.Add(new Temperature("CPU", 0));

  1001               t.Add(new Temperature("Auxiliary", 2));

  1002               t.Add(new Temperature("Motherboard", 3));

  1003               for (int i = 0; i < superIO.Fans.Length; i++)

  1004                 f.Add(new Fan("Fan #" + (i + 1), i));

  1005               for (int i = 0; i < superIO.Controls.Length; i++)

  1006                 c.Add(new Ctrl("Fan #" + (i + 1), i));

  1007               break;

  1008             case Model.P9X79: // NCT6776F

  1009               v.Add(new Voltage("CPU VCore", 0));

  1010               v.Add(new Voltage("+12V", 1, 11, 1));

  1011               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

  1012               v.Add(new Voltage("+3.3V", 3, 34, 34));

  1013               v.Add(new Voltage("+5V", 4, 12, 3));

  1014               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

  1015               v.Add(new Voltage("VBAT", 8, 34, 34));

  1016               t.Add(new Temperature("CPU", 0));

  1017               t.Add(new Temperature("Motherboard", 3));

  1018               for (int i = 0; i < superIO.Fans.Length; i++)

  1019                 f.Add(new Fan("Fan #" + (i + 1), i));

  1020               for (int i = 0; i < superIO.Controls.Length; i++)

  1021                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1022               break;

  1023             default:

  1024               v.Add(new Voltage("CPU VCore", 0));

  1025               v.Add(new Voltage("Voltage #2", 1, true));

  1026               v.Add(new Voltage("AVCC", 2, 34, 34));

  1027               v.Add(new Voltage("3VCC", 3, 34, 34));

  1028               v.Add(new Voltage("Voltage #5", 4, true));

  1029               v.Add(new Voltage("Voltage #6", 5, true));

  1030               v.Add(new Voltage("Voltage #7", 6, true));

  1031               v.Add(new Voltage("3VSB", 7, 34, 34));

  1032               v.Add(new Voltage("VBAT", 8, 34, 34));

  1033               t.Add(new Temperature("CPU Core", 0));

  1034               t.Add(new Temperature("Temperature #1", 1));

  1035               t.Add(new Temperature("Temperature #2", 2));

  1036               t.Add(new Temperature("Temperature #3", 3));

  1037               for (int i = 0; i < superIO.Fans.Length; i++)

  1038                 f.Add(new Fan("Fan #" + (i + 1), i));

  1039               for (int i = 0; i < superIO.Controls.Length; i++)

  1040                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1041               break;

  1042           }

  1043           break;

  1044         default:

  1045           v.Add(new Voltage("CPU VCore", 0));

  1046           v.Add(new Voltage("Voltage #2", 1, true));

  1047           v.Add(new Voltage("AVCC", 2, 34, 34));

  1048           v.Add(new Voltage("3VCC", 3, 34, 34));

  1049           v.Add(new Voltage("Voltage #5", 4, true));

  1050           v.Add(new Voltage("Voltage #6", 5, true));

  1051           v.Add(new Voltage("Voltage #7", 6, true));

  1052           v.Add(new Voltage("3VSB", 7, 34, 34));

  1053           v.Add(new Voltage("VBAT", 8, 34, 34));

  1054           t.Add(new Temperature("CPU Core", 0));

  1055           t.Add(new Temperature("Temperature #1", 1));

  1056           t.Add(new Temperature("Temperature #2", 2));

  1057           t.Add(new Temperature("Temperature #3", 3));

  1058           for (int i = 0; i < superIO.Fans.Length; i++)

  1059             f.Add(new Fan("Fan #" + (i + 1), i));

  1060           for (int i = 0; i < superIO.Controls.Length; i++)

  1061             c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1062           break;

  1063       }

  1064     }

  1066     private static void GetNuvotonConfigurationD(ISuperIO superIO,

  1067       Manufacturer manufacturer, Model model,

  1068       IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)

  1069     {

  1070       switch (manufacturer) {

  1071         case Manufacturer.ASUS:

  1072           switch (model) {

  1073             case Model.P8Z77_V: // NCT6779D

  1074               v.Add(new Voltage("CPU VCore", 0));

  1075               v.Add(new Voltage("Voltage #2", 1, true));

  1076               v.Add(new Voltage("AVCC", 2, 34, 34));

  1077               v.Add(new Voltage("3VCC", 3, 34, 34));

  1078               v.Add(new Voltage("Voltage #5", 4, true));

  1079               v.Add(new Voltage("Voltage #6", 5, true));

  1080               v.Add(new Voltage("Voltage #7", 6, true));

  1081               v.Add(new Voltage("3VSB", 7, 34, 34));

  1082               v.Add(new Voltage("VBAT", 8, 34, 34));

  1083               v.Add(new Voltage("VTT", 9));

  1084               v.Add(new Voltage("Voltage #11", 10, true));

  1085               v.Add(new Voltage("Voltage #12", 11, true));

  1086               v.Add(new Voltage("Voltage #13", 12, true));

  1087               v.Add(new Voltage("Voltage #14", 13, true));

  1088               v.Add(new Voltage("Voltage #15", 14, true));

  1089               t.Add(new Temperature("CPU Core", 0));

  1090               t.Add(new Temperature("Auxiliary", 1));

  1091               t.Add(new Temperature("Motherboard", 2));

  1092               f.Add(new Fan("Chassis Fan #1", 0));

  1093               f.Add(new Fan("CPU Fan", 1));

  1094               f.Add(new Fan("Chassis Fan #2", 2));

  1095               f.Add(new Fan("Chassis Fan #3", 3));

  1096               c.Add(new Ctrl("Chassis Fan #1", 0));

  1097               c.Add(new Ctrl("CPU  Fan", 1));

  1098               c.Add(new Ctrl("Chassis Fan #2", 2));

  1099               c.Add(new Ctrl("Chassis Fan #3", 3));

  1100               break;

  1101             default:

  1102               v.Add(new Voltage("CPU VCore", 0));

  1103               v.Add(new Voltage("Voltage #2", 1, true));

  1104               v.Add(new Voltage("AVCC", 2, 34, 34));

  1105               v.Add(new Voltage("3VCC", 3, 34, 34));

  1106               v.Add(new Voltage("Voltage #5", 4, true));

  1107               v.Add(new Voltage("Voltage #6", 5, true));

  1108               v.Add(new Voltage("Voltage #7", 6, true));

  1109               v.Add(new Voltage("3VSB", 7, 34, 34));

  1110               v.Add(new Voltage("VBAT", 8, 34, 34));

  1111               v.Add(new Voltage("VTT", 9));

  1112               v.Add(new Voltage("Voltage #11", 10, true));

  1113               v.Add(new Voltage("Voltage #12", 11, true));

  1114               v.Add(new Voltage("Voltage #13", 12, true));

  1115               v.Add(new Voltage("Voltage #14", 13, true));

  1116               v.Add(new Voltage("Voltage #15", 14, true));

  1117               t.Add(new Temperature("CPU Core", 0));

  1118               t.Add(new Temperature("Temperature #1", 1));

  1119               t.Add(new Temperature("Temperature #2", 2));

  1120               t.Add(new Temperature("Temperature #3", 3));

  1121               t.Add(new Temperature("Temperature #4", 4));

  1122               t.Add(new Temperature("Temperature #5", 5));

  1123               t.Add(new Temperature("Temperature #6", 6));

  1124               for (int i = 0; i < superIO.Fans.Length; i++)

  1125                 f.Add(new Fan("Fan #" + (i + 1), i));

  1126               for (int i = 0; i < superIO.Controls.Length; i++)

  1127                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1128               break;

  1129           }

  1130           break;

  1131         default:

  1132           v.Add(new Voltage("CPU VCore", 0));

  1133           v.Add(new Voltage("Voltage #2", 1, true));

  1134           v.Add(new Voltage("AVCC", 2, 34, 34));

  1135           v.Add(new Voltage("3VCC", 3, 34, 34));

  1136           v.Add(new Voltage("Voltage #5", 4, true));

  1137           v.Add(new Voltage("Voltage #6", 5, true));

  1138           v.Add(new Voltage("Voltage #7", 6, true));

  1139           v.Add(new Voltage("3VSB", 7, 34, 34));

  1140           v.Add(new Voltage("VBAT", 8, 34, 34));

  1141           v.Add(new Voltage("VTT", 9));

  1142           v.Add(new Voltage("Voltage #11", 10, true));

  1143           v.Add(new Voltage("Voltage #12", 11, true));

  1144           v.Add(new Voltage("Voltage #13", 12, true));

  1145           v.Add(new Voltage("Voltage #14", 13, true));

  1146           v.Add(new Voltage("Voltage #15", 14, true));

  1147           t.Add(new Temperature("CPU Core", 0));

  1148           t.Add(new Temperature("Temperature #1", 1));

  1149           t.Add(new Temperature("Temperature #2", 2));

  1150           t.Add(new Temperature("Temperature #3", 3));

  1151           t.Add(new Temperature("Temperature #4", 4));

  1152           t.Add(new Temperature("Temperature #5", 5));

  1153           t.Add(new Temperature("Temperature #6", 6));

  1154           for (int i = 0; i < superIO.Fans.Length; i++)

  1155             f.Add(new Fan("Fan #" + (i + 1), i));

  1156           for (int i = 0; i < superIO.Controls.Length; i++)

  1157             c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1158           break;

  1159       }

  1160     }

  1162     private static void GetWinbondConfigurationEHF(Manufacturer manufacturer,

  1163       Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)

  1164     {

  1165       switch (manufacturer) {

  1166         case Manufacturer.ASRock:

  1167           switch (model) {

  1168             case Model.AOD790GX_128M: // W83627EHF

  1169               v.Add(new Voltage("CPU VCore", 0));

  1170               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

  1171               v.Add(new Voltage("+3.3V", 4, 10, 10));

  1172               v.Add(new Voltage("+5V", 5, 20, 10));

  1173               v.Add(new Voltage("+12V", 6, 28, 5));

  1174               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

  1175               v.Add(new Voltage("VBAT", 8, 34, 34));

  1176               t.Add(new Temperature("CPU", 0));

  1177               t.Add(new Temperature("Motherboard", 2));

  1178               f.Add(new Fan("CPU Fan", 0));

  1179               f.Add(new Fan("Chassis Fan", 1));

  1180               break;

  1181             default:

  1182               v.Add(new Voltage("CPU VCore", 0));

  1183               v.Add(new Voltage("Voltage #2", 1, true));

  1184               v.Add(new Voltage("AVCC", 2, 34, 34));

  1185               v.Add(new Voltage("3VCC", 3, 34, 34));

  1186               v.Add(new Voltage("Voltage #5", 4, true));

  1187               v.Add(new Voltage("Voltage #6", 5, true));

  1188               v.Add(new Voltage("Voltage #7", 6, true));

  1189               v.Add(new Voltage("3VSB", 7, 34, 34));

  1190               v.Add(new Voltage("VBAT", 8, 34, 34));

  1191               v.Add(new Voltage("Voltage #10", 9, true));

  1192               t.Add(new Temperature("CPU", 0));

  1193               t.Add(new Temperature("Auxiliary", 1));

  1194               t.Add(new Temperature("System", 2));

  1195               f.Add(new Fan("System Fan", 0));

  1196               f.Add(new Fan("CPU Fan", 1));

  1197               f.Add(new Fan("Auxiliary Fan", 2));

  1198               f.Add(new Fan("CPU Fan #2", 3));

  1199               f.Add(new Fan("Auxiliary Fan #2", 4));

  1200               break;

  1201           } break;

  1202         default:

  1203           v.Add(new Voltage("CPU VCore", 0));

  1204           v.Add(new Voltage("Voltage #2", 1, true));

  1205           v.Add(new Voltage("AVCC", 2, 34, 34));

  1206           v.Add(new Voltage("3VCC", 3, 34, 34));

  1207           v.Add(new Voltage("Voltage #5", 4, true));

  1208           v.Add(new Voltage("Voltage #6", 5, true));

  1209           v.Add(new Voltage("Voltage #7", 6, true));

  1210           v.Add(new Voltage("3VSB", 7, 34, 34));

  1211           v.Add(new Voltage("VBAT", 8, 34, 34));

  1212           v.Add(new Voltage("Voltage #10", 9, true));

  1213           t.Add(new Temperature("CPU", 0));

  1214           t.Add(new Temperature("Auxiliary", 1));

  1215           t.Add(new Temperature("System", 2));

  1216           f.Add(new Fan("System Fan", 0));

  1217           f.Add(new Fan("CPU Fan", 1));

  1218           f.Add(new Fan("Auxiliary Fan", 2));

  1219           f.Add(new Fan("CPU Fan #2", 3));

  1220           f.Add(new Fan("Auxiliary Fan #2", 4));

  1221           break;

  1222       }

  1223     }

  1225     private static void GetWinbondConfigurationHG(Manufacturer manufacturer,

  1226       Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)

  1227     {

  1228       switch (manufacturer) {

  1229         case Manufacturer.ASRock:

  1230           switch (model) {

  1231             case Model._880GMH_USB3: // W83627DHG-P

  1232               v.Add(new Voltage("CPU VCore", 0));

  1233               v.Add(new Voltage("+3.3V", 3, 34, 34));

  1234               v.Add(new Voltage("+5V", 5, 15, 7.5f));

  1235               v.Add(new Voltage("+12V", 6, 56, 10));

  1236               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

  1237               v.Add(new Voltage("VBAT", 8, 34, 34));

  1238               t.Add(new Temperature("CPU", 0));

  1239               t.Add(new Temperature("Motherboard", 2));

  1240               f.Add(new Fan("Chassis Fan", 0));

  1241               f.Add(new Fan("CPU Fan", 1));

  1242               f.Add(new Fan("Power Fan", 2));

  1243               break;

  1244             default:

  1245               v.Add(new Voltage("CPU VCore", 0));

  1246               v.Add(new Voltage("Voltage #2", 1, true));

  1247               v.Add(new Voltage("AVCC", 2, 34, 34));

  1248               v.Add(new Voltage("3VCC", 3, 34, 34));

  1249               v.Add(new Voltage("Voltage #5", 4, true));

  1250               v.Add(new Voltage("Voltage #6", 5, true));

  1251               v.Add(new Voltage("Voltage #7", 6, true));

  1252               v.Add(new Voltage("3VSB", 7, 34, 34));

  1253               v.Add(new Voltage("VBAT", 8, 34, 34));

  1254               t.Add(new Temperature("CPU", 0));

  1255               t.Add(new Temperature("Auxiliary", 1));

  1256               t.Add(new Temperature("System", 2));

  1257               f.Add(new Fan("System Fan", 0));

  1258               f.Add(new Fan("CPU Fan", 1));

  1259               f.Add(new Fan("Auxiliary Fan", 2));

  1260               f.Add(new Fan("CPU Fan #2", 3));

  1261               f.Add(new Fan("Auxiliary Fan #2", 4));

  1262               break;

  1263           }

  1264           break;

  1265         case Manufacturer.ASUS:

  1266           switch (model) {

  1267             case Model.P6T: // W83667HG

  1268             case Model.P6X58D_E: // W83667HG

  1269             case Model.Rampage_II_GENE: // W83667HG

  1270               v.Add(new Voltage("CPU VCore", 0));

  1271               v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));

  1272               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

  1273               v.Add(new Voltage("+3.3V", 3, 34, 34));

  1274               v.Add(new Voltage("+5V", 4, 15, 7.5f));

  1275               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

  1276               v.Add(new Voltage("VBAT", 8, 34, 34));

  1277               t.Add(new Temperature("CPU", 0));

  1278               t.Add(new Temperature("Motherboard", 2));

  1279               f.Add(new Fan("Chassis Fan #1", 0));

  1280               f.Add(new Fan("CPU Fan", 1));

  1281               f.Add(new Fan("Power Fan", 2));

  1282               f.Add(new Fan("Chassis Fan #2", 3));

  1283               f.Add(new Fan("Chassis Fan #3", 4));

  1284               break;

  1285             case Model.Rampage_Extreme: // W83667HG

  1286               v.Add(new Voltage("CPU VCore", 0));

  1287               v.Add(new Voltage("+12V", 1, 12, 2));

  1288               v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

  1289               v.Add(new Voltage("+3.3V", 3, 34, 34));

  1290               v.Add(new Voltage("+5V", 4, 15, 7.5f));

  1291               v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

  1292               v.Add(new Voltage("VBAT", 8, 34, 34));

  1293               t.Add(new Temperature("CPU", 0));

  1294               t.Add(new Temperature("Motherboard", 2));

  1295               f.Add(new Fan("Chassis Fan #1", 0));

  1296               f.Add(new Fan("CPU Fan", 1));

  1297               f.Add(new Fan("Power Fan", 2));

  1298               f.Add(new Fan("Chassis Fan #2", 3));

  1299               f.Add(new Fan("Chassis Fan #3", 4));

  1300               break;

  1301             default:

  1302               v.Add(new Voltage("CPU VCore", 0));

  1303               v.Add(new Voltage("Voltage #2", 1, true));

  1304               v.Add(new Voltage("AVCC", 2, 34, 34));

  1305               v.Add(new Voltage("3VCC", 3, 34, 34));

  1306               v.Add(new Voltage("Voltage #5", 4, true));

  1307               v.Add(new Voltage("Voltage #6", 5, true));

  1308               v.Add(new Voltage("Voltage #7", 6, true));

  1309               v.Add(new Voltage("3VSB", 7, 34, 34));

  1310               v.Add(new Voltage("VBAT", 8, 34, 34));

  1311               t.Add(new Temperature("CPU", 0));

  1312               t.Add(new Temperature("Auxiliary", 1));

  1313               t.Add(new Temperature("System", 2));

  1314               f.Add(new Fan("System Fan", 0));

  1315               f.Add(new Fan("CPU Fan", 1));

  1316               f.Add(new Fan("Auxiliary Fan", 2));

  1317               f.Add(new Fan("CPU Fan #2", 3));

  1318               f.Add(new Fan("Auxiliary Fan #2", 4));

  1319               break;

  1320           }

  1321           break;

  1322         default:

  1323           v.Add(new Voltage("CPU VCore", 0));

  1324           v.Add(new Voltage("Voltage #2", 1, true));

  1325           v.Add(new Voltage("AVCC", 2, 34, 34));

  1326           v.Add(new Voltage("3VCC", 3, 34, 34));

  1327           v.Add(new Voltage("Voltage #5", 4, true));

  1328           v.Add(new Voltage("Voltage #6", 5, true));

  1329           v.Add(new Voltage("Voltage #7", 6, true));

  1330           v.Add(new Voltage("3VSB", 7, 34, 34));

  1331           v.Add(new Voltage("VBAT", 8, 34, 34));

  1332           t.Add(new Temperature("CPU", 0));

  1333           t.Add(new Temperature("Auxiliary", 1));

  1334           t.Add(new Temperature("System", 2));

  1335           f.Add(new Fan("System Fan", 0));

  1336           f.Add(new Fan("CPU Fan", 1));

  1337           f.Add(new Fan("Auxiliary Fan", 2));

  1338           f.Add(new Fan("CPU Fan #2", 3));

  1339           f.Add(new Fan("Auxiliary Fan #2", 4));

  1340           break;

  1341       }

  1342     }

  1344     public override HardwareType HardwareType {

  1345       get { return HardwareType.SuperIO; }

  1346     }

  1348     public override IHardware Parent {

  1349       get { return mainboard; }

  1350     }

  1353     public override string GetReport() {

  1354       return superIO.GetReport();

  1355     }

  1357     public override void Update() {

  1358       superIO.Update();

  1360       foreach (Sensor sensor in voltages) {

  1361         float? value = readVoltage(sensor.Index);

  1362         if (value.HasValue) {

  1363           sensor.Value = value + (value - sensor.Parameters[2].Value) *

  1364             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

  1365           ActivateSensor(sensor);

  1366         }

  1367       }

  1369       foreach (Sensor sensor in temperatures) {

  1370         float? value = readTemperature(sensor.Index);

  1371         if (value.HasValue) {

  1372           sensor.Value = value + sensor.Parameters[0].Value;

  1373           ActivateSensor(sensor);

  1374         }

  1375       }

  1377       foreach (Sensor sensor in fans) {

  1378         float? value = readFan(sensor.Index);

  1379         if (value.HasValue) {

  1380           sensor.Value = value;

  1381           if (value.Value > 0)

  1382             ActivateSensor(sensor);

  1383         }

  1384       }

  1386       foreach (Sensor sensor in controls) {

  1387         float? value = readControl(sensor.Index);

  1388         sensor.Value = value;

  1389       }

  1391       postUpdate();

  1392     }

  1394     public override void Close() {

  1395       foreach (Sensor sensor in controls) {

  1396         // restore all controls back to default

  1397         superIO.SetControl(sensor.Index, null);

  1398       }

  1399       base.Close();

  1400     }

  1402     private class Voltage {

  1403       public readonly string Name;

  1404       public readonly int Index;

  1405       public readonly float Ri;

  1406       public readonly float Rf;

  1407       public readonly float Vf;

  1408       public readonly bool Hidden;

  1410       public Voltage(string name, int index) :

  1411         this(name, index, false) { }

  1413       public Voltage(string name, int index, bool hidden) :

  1414         this(name, index, 0, 1, 0, hidden) { }

  1416       public Voltage(string name, int index, float ri, float rf) :

  1417         this(name, index, ri, rf, 0, false) { }

  1419       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)

  1421       public Voltage(string name, int index,

  1422         float ri, float rf, float vf, bool hidden)

  1423       {

  1424         this.Name = name;

  1425         this.Index = index;

  1426         this.Ri = ri;

  1427         this.Rf = rf;

  1428         this.Vf = vf;

  1429         this.Hidden = hidden;

  1430       }

  1431     }

  1433     private class Temperature {

  1434       public readonly string Name;

  1435       public readonly int Index;

  1437       public Temperature(string name, int index) {

  1438         this.Name = name;

  1439         this.Index = index;

  1440       }

  1441     }

  1443     private class Fan {

  1444       public readonly string Name;

  1445       public readonly int Index;

  1447       public Fan(string name, int index) {

  1448         this.Name = name;

  1449         this.Index = index;

  1450       }

  1451     }

  1453     private class Ctrl {

  1454       public readonly string Name;

  1455       public readonly int Index;

  1457       public Ctrl(string name, int index) {

  1458         this.Name = name;

  1459         this.Index = index;

  1460       }

  1461     }

  1462   }

  1463 }

author	moel.mich
	Tue, 30 Dec 2014 21:04:54 +0000
changeset 430	6b24e39f1b84
parent 416	f117373bd190
permissions	-rw-r--r--