OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@47f5dcaf8e9f (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@408	7	Copyright (C) 2009-2013 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@228	13	using System.Threading;
moel@130	14	using OpenHardwareMonitor.Hardware.LPC;
moel@130	15
moel@130	16	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@416	17	internal sealed class SuperIOHardware : Hardware {
moel@130	18
moel@195	19	private readonly Mainboard mainboard;
moel@195	20	private readonly ISuperIO superIO;
moel@130	21
moel@195	22	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	23	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	24	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	25	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	26
moel@228	27	private delegate float? ReadValueDelegate(int index);
moel@228	28	private delegate void UpdateDelegate();
moel@228	29
moel@228	30	// delegates for mainboard specific sensor reading code
moel@228	31	private readonly ReadValueDelegate readVoltage;
moel@228	32	private readonly ReadValueDelegate readTemperature;
moel@228	33	private readonly ReadValueDelegate readFan;
moel@323	34	private readonly ReadValueDelegate readControl;
moel@228	35
moel@228	36	// delegate for post update mainboard specific code
moel@228	37	private readonly UpdateDelegate postUpdate;
moel@228	38
moel@228	39	// mainboard specific mutex
moel@228	40	private readonly Mutex mutex;
moel@228	41
moel@176	42	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	43	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	44	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@416	45	superIO.Chip.ToString().ToLowerInvariant()), settings)
moel@130	46	{
moel@176	47	this.mainboard = mainboard;
moel@130	48	this.superIO = superIO;
moel@130	49
moel@416	50	IList<Voltage> v;
moel@416	51	IList<Temperature> t;
moel@416	52	IList<Fan> f;
moel@416	53	IList<Ctrl> c;
moel@416	54	GetBoardSpecificConfiguration(superIO, manufacturer, model,
moel@416	55	out v, out t, out f, out c,
moel@416	56	out readVoltage, out readTemperature, out readFan, out readControl,
moel@416	57	out postUpdate, out mutex);
moel@228	58
moel@416	59	CreateVoltageSensors(superIO, settings, v);
moel@416	60	CreateTemperatureSensors(superIO, settings, t);
moel@416	61	CreateFanSensors(superIO, settings, f);
moel@416	62	CreateControlSensors(superIO, settings, c);
moel@416	63	}
moel@228	64
moel@416	65	private void CreateControlSensors(ISuperIO superIO, ISettings settings,
moel@416	66	IList<Ctrl> c)
moel@416	67	{
moel@416	68	foreach (Ctrl ctrl in c) {
moel@416	69	int index = ctrl.Index;
moel@416	70	if (index < superIO.Controls.Length) {
moel@416	71	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@416	72	this, settings);
moel@416	73	Control control = new Control(sensor, settings, 0, 100);
moel@416	74	control.ControlModeChanged += (cc) => {
moel@416	75	if (cc.ControlMode == ControlMode.Default) {
moel@416	76	superIO.SetControl(index, null);
moel@416	77	} else {
moel@416	78	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@416	79	}
moel@416	80	};
moel@416	81	control.SoftwareControlValueChanged += (cc) => {
moel@416	82	if (cc.ControlMode == ControlMode.Software)
moel@416	83	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@416	84	};
moel@416	85	if (control.ControlMode == ControlMode.Software)
moel@416	86	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@416	87	sensor.Control = control;
moel@416	88	controls.Add(sensor);
moel@416	89	ActivateSensor(sensor);
moel@416	90	}
moel@416	91	}
moel@416	92	}
moel@416	93
moel@416	94	private void CreateFanSensors(ISuperIO superIO, ISettings settings,
moel@416	95	IList<Fan> f)
moel@416	96	{
moel@416	97	foreach (Fan fan in f) {
moel@416	98	if (fan.Index < superIO.Fans.Length) {
moel@416	99	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@416	100	this, settings);
moel@416	101	fans.Add(sensor);
moel@416	102	}
moel@416	103	}
moel@416	104	}
moel@416	105
moel@416	106	private void CreateTemperatureSensors(ISuperIO superIO, ISettings settings,
moel@416	107	IList<Temperature> t)
moel@416	108	{
moel@416	109	foreach (Temperature temperature in t)
moel@416	110	if (temperature.Index < superIO.Temperatures.Length) {
moel@416	111	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@416	112	SensorType.Temperature, this, new[] {
moel@416	113	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@416	114	}, settings);
moel@416	115	temperatures.Add(sensor);
moel@416	116	}
moel@416	117	}
moel@416	118
moel@416	119	private void CreateVoltageSensors(ISuperIO superIO, ISettings settings,
moel@416	120	IList<Voltage> v)
moel@416	121	{
moel@416	122	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@416	123	foreach (Voltage voltage in v)
moel@416	124	if (voltage.Index < superIO.Voltages.Length) {
moel@416	125	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@416	126	voltage.Hidden, SensorType.Voltage, this, new[] {
moel@416	127	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@416	128	formula, voltage.Ri),
moel@416	129	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@416	130	formula, voltage.Rf),
moel@416	131	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@416	132	formula, voltage.Vf)
moel@416	133	}, settings);
moel@416	134	voltages.Add(sensor);
moel@416	135	}
moel@416	136	}
moel@416	137
moel@416	138	private static void GetBoardSpecificConfiguration(ISuperIO superIO,
moel@416	139	Manufacturer manufacturer, Model model, out IList<Voltage> v,
moel@416	140	out IList<Temperature> t, out IList<Fan> f, out IList<Ctrl> c,
moel@416	141	out ReadValueDelegate readVoltage,
moel@416	142	out ReadValueDelegate readTemperature,
moel@416	143	out ReadValueDelegate readFan,
moel@416	144	out ReadValueDelegate readControl,
moel@416	145	out UpdateDelegate postUpdate, out Mutex mutex) {
moel@416	146	readVoltage = (index) => superIO.Voltages[index];
moel@416	147	readTemperature = (index) => superIO.Temperatures[index];
moel@416	148	readFan = (index) => superIO.Fans[index];
moel@416	149	readControl = (index) => superIO.Controls[index];
moel@416	150
moel@416	151	postUpdate = () => { };
moel@416	152	mutex = null;
moel@416	153
moel@416	154	v = new List<Voltage>();
moel@416	155	t = new List<Temperature>();
moel@416	156	f = new List<Fan>();
moel@416	157	c = new List<Ctrl>();
moel@130	158
moel@130	159	switch (superIO.Chip) {
moel@353	160	case Chip.IT8705F:
moel@130	161	case Chip.IT8712F:
moel@130	162	case Chip.IT8716F:
moel@130	163	case Chip.IT8718F:
moel@416	164	case Chip.IT8720F:
moel@416	165	case Chip.IT8726F:
moel@416	166	GetITEConfigurationsA(superIO, manufacturer, model, v, t, f, c,
moel@416	167	ref readFan, ref postUpdate, ref mutex);
moel@416	168	break;
moel@416	169
moel@416	170	case Chip.IT8721F:
moel@416	171	case Chip.IT8728F:
moel@416	172	case Chip.IT8771E:
moel@416	173	case Chip.IT8772E:
moel@416	174	GetITEConfigurationsB(superIO, manufacturer, model, v, t, f, c);
moel@416	175	break;
moel@416	176
moel@416	177	case Chip.F71858:
moel@416	178	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	179	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@416	180	v.Add(new Voltage("Battery", 2, 150, 150));
moel@416	181	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	182	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	183	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	184	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	185	break;
moel@416	186	case Chip.F71862:
moel@416	187	case Chip.F71869:
moel@416	188	case Chip.F71869A:
moel@416	189	case Chip.F71882:
moel@416	190	case Chip.F71889AD:
moel@416	191	case Chip.F71889ED:
moel@416	192	case Chip.F71889F:
moel@416	193	case Chip.F71808E:
moel@416	194	GetFintekConfiguration(superIO, manufacturer, model, v, t, f);
moel@416	195	break;
moel@416	196
moel@416	197	case Chip.W83627EHF:
moel@416	198	GetWinbondConfigurationEHF(manufacturer, model, v, t, f);
moel@416	199	break;
moel@416	200	case Chip.W83627DHG:
moel@416	201	case Chip.W83627DHGP:
moel@416	202	case Chip.W83667HG:
moel@416	203	case Chip.W83667HGB:
moel@416	204	GetWinbondConfigurationHG(manufacturer, model, v, t, f);
moel@416	205	break;
moel@416	206	case Chip.W83627HF:
moel@416	207	case Chip.W83627THF:
moel@416	208	case Chip.W83687THF:
moel@416	209	v.Add(new Voltage("CPU VCore", 0));
moel@416	210	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	211	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	212	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@416	213	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	214	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@416	215	v.Add(new Voltage("VBAT", 6));
moel@416	216	t.Add(new Temperature("CPU", 0));
moel@416	217	t.Add(new Temperature("Auxiliary", 1));
moel@416	218	t.Add(new Temperature("System", 2));
moel@416	219	f.Add(new Fan("System Fan", 0));
moel@416	220	f.Add(new Fan("CPU Fan", 1));
moel@416	221	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	222	break;
moel@416	223	case Chip.NCT6771F:
moel@416	224	case Chip.NCT6776F:
moel@416	225	GetNuvotonConfigurationF(superIO, manufacturer, model, v, t, f, c);
moel@416	226	break;
moel@416	227	case Chip.NCT6779D:
moel@416	228	case Chip.NCT6791D:
moel@416	229	GetNuvotonConfigurationD(superIO, manufacturer, model, v, t, f, c);
moel@416	230	break;
moel@416	231	default:
moel@416	232	GetDefaultConfiguration(superIO, v, t, f, c);
moel@416	233	break;
moel@416	234	}
moel@416	235	}
moel@416	236
moel@416	237	private static void GetDefaultConfiguration(ISuperIO superIO,
moel@416	238	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	239	{
moel@416	240	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@416	241	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@416	242	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	243	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	244	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	245	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	246	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	247	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	248	}
moel@416	249
moel@416	250	private static void GetITEConfigurationsA(ISuperIO superIO,
moel@416	251	Manufacturer manufacturer, Model model,
moel@416	252	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c,
moel@416	253	ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,
moel@416	254	ref Mutex mutex)
moel@416	255	{
moel@416	256	switch (manufacturer) {
moel@416	257	case Manufacturer.ASUS:
moel@416	258	switch (model) {
moel@416	259	case Model.Crosshair_III_Formula: // IT8720F
moel@416	260	v.Add(new Voltage("VBat", 8));
moel@416	261	t.Add(new Temperature("CPU", 0));
moel@416	262	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	263	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	264	break;
moel@416	265	case Model.M2N_SLI_DELUXE:
moel@416	266	v.Add(new Voltage("CPU VCore", 0));
moel@416	267	v.Add(new Voltage("+3.3V", 1));
moel@416	268	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	269	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	270	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	271	v.Add(new Voltage("VBat", 8));
moel@416	272	t.Add(new Temperature("CPU", 0));
moel@416	273	t.Add(new Temperature("Motherboard", 1));
moel@416	274	f.Add(new Fan("CPU Fan", 0));
moel@416	275	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	276	f.Add(new Fan("Power Fan", 2));
moel@221	277	break;
moel@416	278	case Model.M4A79XTD_EVO: // IT8720F
moel@416	279	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	280	v.Add(new Voltage("VBat", 8));
moel@416	281	t.Add(new Temperature("CPU", 0));
moel@416	282	t.Add(new Temperature("Motherboard", 1));
moel@416	283	f.Add(new Fan("CPU Fan", 0));
moel@416	284	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	285	f.Add(new Fan("Chassis Fan #2", 2));
moel@130	286	break;
moel@130	287	default:
moel@130	288	v.Add(new Voltage("CPU VCore", 0));
moel@130	289	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	290	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	291	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	292	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	293	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	294	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	295	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	296	v.Add(new Voltage("VBat", 8));
moel@130	297	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	298	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	299	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	300	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	301	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	302	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	303	break;
moel@130	304	}
moel@130	305	break;
moel@170	306
moel@416	307	case Manufacturer.ASRock:
moel@416	308	switch (model) {
moel@416	309	case Model.P55_Deluxe: // IT8720F
moel@416	310	GetASRockConfiguration(superIO, v, t, f,
moel@416	311	ref readFan, ref postUpdate, ref mutex);
moel@177	312	break;
moel@416	313	default:
moel@416	314	v.Add(new Voltage("CPU VCore", 0));
moel@416	315	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	316	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	317	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	318	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	319	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	320	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	321	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	322	v.Add(new Voltage("VBat", 8));
moel@416	323	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	324	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	325	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	326	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	327	break;
moel@416	328	};
moel@416	329	break;
moel@416	330
moel@416	331	case Manufacturer.DFI:
moel@416	332	switch (model) {
moel@416	333	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@416	334	v.Add(new Voltage("CPU VCore", 0));
moel@416	335	v.Add(new Voltage("FSB VTT", 1));
moel@416	336	v.Add(new Voltage("+3.3V", 2));
moel@416	337	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	338	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	339	v.Add(new Voltage("NB Core", 5));
moel@416	340	v.Add(new Voltage("VDIMM", 6));
moel@416	341	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	342	v.Add(new Voltage("VBat", 8));
moel@416	343	t.Add(new Temperature("CPU", 0));
moel@416	344	t.Add(new Temperature("System", 1));
moel@416	345	t.Add(new Temperature("Chipset", 2));
moel@416	346	f.Add(new Fan("Fan #1", 0));
moel@416	347	f.Add(new Fan("Fan #2", 1));
moel@416	348	f.Add(new Fan("Fan #3", 2));
moel@416	349	break;
moel@416	350	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@416	351	v.Add(new Voltage("CPU VCore", 0));
moel@416	352	v.Add(new Voltage("VTT", 1));
moel@416	353	v.Add(new Voltage("+3.3V", 2));
moel@416	354	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	355	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	356	v.Add(new Voltage("CPU PLL", 5));
moel@416	357	v.Add(new Voltage("DRAM", 6));
moel@416	358	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@416	359	v.Add(new Voltage("VBat", 8));
moel@416	360	t.Add(new Temperature("Chipset", 0));
moel@416	361	t.Add(new Temperature("CPU PWM", 1));
moel@416	362	t.Add(new Temperature("CPU", 2));
moel@416	363	f.Add(new Fan("Fan #1", 0));
moel@416	364	f.Add(new Fan("Fan #2", 1));
moel@416	365	f.Add(new Fan("Fan #3", 2));
moel@416	366	break;
moel@416	367	default:
moel@416	368	v.Add(new Voltage("CPU VCore", 0));
moel@416	369	v.Add(new Voltage("VTT", 1, true));
moel@416	370	v.Add(new Voltage("+3.3V", 2, true));
moel@416	371	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@416	372	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@416	373	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	374	v.Add(new Voltage("DRAM", 6, true));
moel@416	375	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@416	376	v.Add(new Voltage("VBat", 8));
moel@416	377	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	378	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	379	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	380	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	381	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	382	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	383	break;
moel@416	384	}
moel@416	385	break;
moel@416	386
moel@416	387	case Manufacturer.Gigabyte:
moel@416	388	switch (model) {
moel@416	389	case Model._965P_S3: // IT8718F
moel@416	390	v.Add(new Voltage("CPU VCore", 0));
moel@416	391	v.Add(new Voltage("DRAM", 1));
moel@416	392	v.Add(new Voltage("+3.3V", 2));
moel@416	393	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	394	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	395	v.Add(new Voltage("VBat", 8));
moel@416	396	t.Add(new Temperature("System", 0));
moel@416	397	t.Add(new Temperature("CPU", 1));
moel@416	398	f.Add(new Fan("CPU Fan", 0));
moel@416	399	f.Add(new Fan("System Fan", 1));
moel@416	400	break;
moel@416	401	case Model.EP45_DS3R: // IT8718F
moel@416	402	case Model.EP45_UD3R:
moel@416	403	case Model.X38_DS5:
moel@416	404	v.Add(new Voltage("CPU VCore", 0));
moel@416	405	v.Add(new Voltage("DRAM", 1));
moel@416	406	v.Add(new Voltage("+3.3V", 2));
moel@416	407	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	408	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	409	v.Add(new Voltage("VBat", 8));
moel@416	410	t.Add(new Temperature("System", 0));
moel@416	411	t.Add(new Temperature("CPU", 1));
moel@416	412	f.Add(new Fan("CPU Fan", 0));
moel@416	413	f.Add(new Fan("System Fan #2", 1));
moel@416	414	f.Add(new Fan("Power Fan", 2));
moel@416	415	f.Add(new Fan("System Fan #1", 3));
moel@416	416	break;
moel@416	417	case Model.EX58_EXTREME: // IT8720F
moel@416	418	v.Add(new Voltage("CPU VCore", 0));
moel@416	419	v.Add(new Voltage("DRAM", 1));
moel@416	420	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	421	v.Add(new Voltage("VBat", 8));
moel@416	422	t.Add(new Temperature("System", 0));
moel@416	423	t.Add(new Temperature("CPU", 1));
moel@416	424	t.Add(new Temperature("Northbridge", 2));
moel@416	425	f.Add(new Fan("CPU Fan", 0));
moel@416	426	f.Add(new Fan("System Fan #2", 1));
moel@416	427	f.Add(new Fan("Power Fan", 2));
moel@416	428	f.Add(new Fan("System Fan #1", 3));
moel@416	429	break;
moel@416	430	case Model.P35_DS3: // IT8718F
moel@416	431	case Model.P35_DS3L: // IT8718F
moel@416	432	v.Add(new Voltage("CPU VCore", 0));
moel@416	433	v.Add(new Voltage("DRAM", 1));
moel@416	434	v.Add(new Voltage("+3.3V", 2));
moel@416	435	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	436	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	437	v.Add(new Voltage("VBat", 8));
moel@416	438	t.Add(new Temperature("System", 0));
moel@416	439	t.Add(new Temperature("CPU", 1));
moel@416	440	f.Add(new Fan("CPU Fan", 0));
moel@416	441	f.Add(new Fan("System Fan #1", 1));
moel@416	442	f.Add(new Fan("System Fan #2", 2));
moel@416	443	f.Add(new Fan("Power Fan", 3));
moel@416	444	break;
moel@416	445	case Model.P55_UD4: // IT8720F
moel@416	446	case Model.P55A_UD3: // IT8720F
moel@416	447	case Model.P55M_UD4: // IT8720F
moel@416	448	case Model.H55_USB3: // IT8720F
moel@416	449	case Model.EX58_UD3R: // IT8720F
moel@416	450	v.Add(new Voltage("CPU VCore", 0));
moel@416	451	v.Add(new Voltage("DRAM", 1));
moel@416	452	v.Add(new Voltage("+3.3V", 2));
moel@416	453	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	454	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	455	v.Add(new Voltage("VBat", 8));
moel@416	456	t.Add(new Temperature("System", 0));
moel@416	457	t.Add(new Temperature("CPU", 2));
moel@416	458	f.Add(new Fan("CPU Fan", 0));
moel@416	459	f.Add(new Fan("System Fan #2", 1));
moel@416	460	f.Add(new Fan("Power Fan", 2));
moel@416	461	f.Add(new Fan("System Fan #1", 3));
moel@416	462	break;
moel@416	463	case Model.H55N_USB3: // IT8720F
moel@416	464	v.Add(new Voltage("CPU VCore", 0));
moel@416	465	v.Add(new Voltage("DRAM", 1));
moel@416	466	v.Add(new Voltage("+3.3V", 2));
moel@416	467	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	468	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	469	v.Add(new Voltage("VBat", 8));
moel@416	470	t.Add(new Temperature("System", 0));
moel@416	471	t.Add(new Temperature("CPU", 2));
moel@416	472	f.Add(new Fan("CPU Fan", 0));
moel@416	473	f.Add(new Fan("System Fan", 1));
moel@416	474	break;
moel@416	475	case Model.G41M_Combo: // IT8718F
moel@416	476	case Model.G41MT_S2: // IT8718F
moel@416	477	case Model.G41MT_S2P: // IT8718F
moel@416	478	v.Add(new Voltage("CPU VCore", 0));
moel@416	479	v.Add(new Voltage("DRAM", 1));
moel@416	480	v.Add(new Voltage("+3.3V", 2));
moel@416	481	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	482	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@416	483	v.Add(new Voltage("VBat", 8));
moel@416	484	t.Add(new Temperature("CPU", 2));
moel@416	485	f.Add(new Fan("CPU Fan", 0));
moel@416	486	f.Add(new Fan("System Fan", 1));
moel@416	487	break;
moel@416	488	case Model.GA_970A_UD3: // IT8720F
moel@416	489	v.Add(new Voltage("CPU VCore", 0));
moel@416	490	v.Add(new Voltage("DRAM", 1));
moel@416	491	v.Add(new Voltage("+3.3V", 2));
moel@416	492	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	493	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	494	v.Add(new Voltage("VBat", 8));
moel@416	495	t.Add(new Temperature("System", 0));
moel@416	496	t.Add(new Temperature("CPU", 1));
moel@416	497	f.Add(new Fan("CPU Fan", 0));
moel@416	498	f.Add(new Fan("System Fan #1", 1));
moel@416	499	f.Add(new Fan("System Fan #2", 2));
moel@416	500	f.Add(new Fan("Power Fan", 4));
moel@416	501	c.Add(new Ctrl("PWM 1", 0));
moel@416	502	c.Add(new Ctrl("PWM 2", 1));
moel@416	503	c.Add(new Ctrl("PWM 3", 2));
moel@416	504	break;
moel@416	505	case Model.GA_MA770T_UD3: // IT8720F
moel@416	506	case Model.GA_MA770T_UD3P: // IT8720F
moel@416	507	case Model.GA_MA790X_UD3P: // IT8720F
moel@416	508	v.Add(new Voltage("CPU VCore", 0));
moel@416	509	v.Add(new Voltage("DRAM", 1));
moel@416	510	v.Add(new Voltage("+3.3V", 2));
moel@416	511	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	512	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	513	v.Add(new Voltage("VBat", 8));
moel@416	514	t.Add(new Temperature("System", 0));
moel@416	515	t.Add(new Temperature("CPU", 1));
moel@416	516	f.Add(new Fan("CPU Fan", 0));
moel@416	517	f.Add(new Fan("System Fan #1", 1));
moel@416	518	f.Add(new Fan("System Fan #2", 2));
moel@416	519	f.Add(new Fan("Power Fan", 3));
moel@416	520	break;
moel@416	521	case Model.GA_MA78LM_S2H: // IT8718F
moel@416	522	v.Add(new Voltage("CPU VCore", 0));
moel@416	523	v.Add(new Voltage("DRAM", 1));
moel@416	524	v.Add(new Voltage("+3.3V", 2));
moel@416	525	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	526	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	527	v.Add(new Voltage("VBat", 8));
moel@416	528	t.Add(new Temperature("System", 0));
moel@416	529	t.Add(new Temperature("CPU", 1));
moel@416	530	t.Add(new Temperature("VRM", 2));
moel@416	531	f.Add(new Fan("CPU Fan", 0));
moel@416	532	f.Add(new Fan("System Fan #1", 1));
moel@416	533	f.Add(new Fan("System Fan #2", 2));
moel@416	534	f.Add(new Fan("Power Fan", 3));
moel@416	535	break;
moel@416	536	case Model.GA_MA785GM_US2H: // IT8718F
moel@416	537	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@416	538	v.Add(new Voltage("CPU VCore", 0));
moel@416	539	v.Add(new Voltage("DRAM", 1));
moel@416	540	v.Add(new Voltage("+3.3V", 2));
moel@416	541	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	542	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@416	543	v.Add(new Voltage("VBat", 8));
moel@416	544	t.Add(new Temperature("System", 0));
moel@416	545	t.Add(new Temperature("CPU", 1));
moel@416	546	f.Add(new Fan("CPU Fan", 0));
moel@416	547	f.Add(new Fan("System Fan", 1));
moel@416	548	f.Add(new Fan("NB Fan", 2));
moel@416	549	break;
moel@416	550	case Model.X58A_UD3R: // IT8720F
moel@416	551	v.Add(new Voltage("CPU VCore", 0));
moel@416	552	v.Add(new Voltage("DRAM", 1));
moel@416	553	v.Add(new Voltage("+3.3V", 2));
moel@416	554	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@416	555	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@416	556	v.Add(new Voltage("VBat", 8));
moel@416	557	t.Add(new Temperature("System", 0));
moel@416	558	t.Add(new Temperature("CPU", 1));
moel@416	559	t.Add(new Temperature("Northbridge", 2));
moel@416	560	f.Add(new Fan("CPU Fan", 0));
moel@416	561	f.Add(new Fan("System Fan #2", 1));
moel@416	562	f.Add(new Fan("Power Fan", 2));
moel@416	563	f.Add(new Fan("System Fan #1", 3));
moel@416	564	break;
moel@416	565	default:
moel@416	566	v.Add(new Voltage("CPU VCore", 0));
moel@416	567	v.Add(new Voltage("DRAM", 1, true));
moel@416	568	v.Add(new Voltage("+3.3V", 2, true));
moel@416	569	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@416	570	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	571	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	572	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	573	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	574	v.Add(new Voltage("VBat", 8));
moel@416	575	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	576	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	577	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	578	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	579	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	580	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	581	break;
moel@416	582	}
moel@416	583	break;
moel@416	584
moel@416	585	default:
moel@416	586	v.Add(new Voltage("CPU VCore", 0));
moel@416	587	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	588	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	589	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	590	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	591	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	592	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	593	v.Add(new Voltage("Voltage #8", 7, true));
moel@416	594	v.Add(new Voltage("VBat", 8));
moel@416	595	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	596	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	597	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	598	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	599	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	600	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	601	break;
moel@416	602	}
moel@416	603	}
moel@416	604
moel@416	605	private static void GetASRockConfiguration(ISuperIO superIO,
moel@416	606	IList<Voltage> v, IList<Temperature> t, IList<Fan> f,
moel@416	607	ref ReadValueDelegate readFan, ref UpdateDelegate postUpdate,
moel@416	608	ref Mutex mutex)
moel@416	609	{
moel@416	610	v.Add(new Voltage("CPU VCore", 0));
moel@416	611	v.Add(new Voltage("+3.3V", 2));
moel@416	612	v.Add(new Voltage("+12V", 4, 30, 10));
moel@416	613	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@416	614	v.Add(new Voltage("VBat", 8));
moel@416	615	t.Add(new Temperature("CPU", 0));
moel@416	616	t.Add(new Temperature("Motherboard", 1));
moel@416	617	f.Add(new Fan("CPU Fan", 0));
moel@416	618	f.Add(new Fan("Chassis Fan #1", 1));
moel@416	619
moel@416	620	// this mutex is also used by the official ASRock tool
moel@416	621	mutex = new Mutex(false, "ASRockOCMark");
moel@416	622
moel@416	623	bool exclusiveAccess = false;
moel@416	624	try {
moel@416	625	exclusiveAccess = mutex.WaitOne(10, false);
moel@416	626	} catch (AbandonedMutexException) { }
moel@416	627	catch (InvalidOperationException) { }
moel@416	628
moel@416	629	// only read additional fans if we get exclusive access
moel@416	630	if (exclusiveAccess) {
moel@416	631
moel@416	632	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	633	f.Add(new Fan("Chassis Fan #3", 3));
moel@416	634	f.Add(new Fan("Power Fan", 4));
moel@416	635
moel@416	636	readFan = (index) => {
moel@416	637	if (index < 2) {
moel@416	638	return superIO.Fans[index];
moel@416	639	} else {
moel@416	640	// get GPIO 80-87
moel@416	641	byte? gpio = superIO.ReadGPIO(7);
moel@416	642	if (!gpio.HasValue)
moel@416	643	return null;
moel@416	644
moel@416	645	// read the last 3 fans based on GPIO 83-85
moel@416	646	int[] masks = { 0x05, 0x03, 0x06 };
moel@416	647	return (((gpio.Value >> 3) & 0x07) ==
moel@416	648	masks[index - 2]) ? superIO.Fans[2] : null;
moel@416	649	}
moel@416	650	};
moel@416	651
moel@416	652	int fanIndex = 0;
moel@416	653	postUpdate = () => {
moel@416	654	// get GPIO 80-87
moel@416	655	byte? gpio = superIO.ReadGPIO(7);
moel@416	656	if (!gpio.HasValue)
moel@416	657	return;
moel@416	658
moel@416	659	// prepare the GPIO 83-85 for the next update
moel@416	660	int[] masks = { 0x05, 0x03, 0x06 };
moel@416	661	superIO.WriteGPIO(7,
moel@416	662	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@416	663	fanIndex = (fanIndex + 1) % 3;
moel@416	664	};
moel@416	665	}
moel@416	666	}
moel@416	667
moel@416	668	private static void GetITEConfigurationsB(ISuperIO superIO,
moel@416	669	Manufacturer manufacturer, Model model,
moel@416	670	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	671	{
moel@416	672	switch (manufacturer) {
moel@416	673	case Manufacturer.ECS:
moel@416	674	switch (model) {
moel@416	675	case Model.A890GXM_A: // IT8721F
moel@416	676	v.Add(new Voltage("CPU VCore", 0));
moel@416	677	v.Add(new Voltage("VDIMM", 1));
moel@416	678	v.Add(new Voltage("NB Voltage", 2));
moel@416	679	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@416	680	// v.Add(new Voltage("VDIMM", 6, true));
moel@416	681	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	682	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	683	t.Add(new Temperature("CPU", 0));
moel@416	684	t.Add(new Temperature("System", 1));
moel@416	685	t.Add(new Temperature("Northbridge", 2));
moel@416	686	f.Add(new Fan("CPU Fan", 0));
moel@416	687	f.Add(new Fan("System Fan", 1));
moel@416	688	f.Add(new Fan("Power Fan", 2));
moel@416	689	break;
moel@416	690	default:
moel@416	691	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	692	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	693	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	694	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@416	695	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	696	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	697	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	698	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	699	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	700	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	701	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	702	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	703	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	704	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	705	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	706	break;
moel@416	707	}
moel@416	708	break;
moel@416	709	case Manufacturer.Gigabyte:
moel@416	710	switch (model) {
moel@416	711	case Model.H61M_DS2_REV_1_2: // IT8728F
moel@416	712	case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@416	713	v.Add(new Voltage("VTT", 0));
moel@416	714	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	715	v.Add(new Voltage("CPU VCore", 5));
moel@416	716	v.Add(new Voltage("DRAM", 6));
moel@416	717	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	718	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	719	t.Add(new Temperature("System", 0));
moel@416	720	t.Add(new Temperature("CPU", 2));
moel@416	721	f.Add(new Fan("CPU Fan", 0));
moel@416	722	f.Add(new Fan("System Fan", 1));
moel@416	723	break;
moel@416	724	case Model.H67A_UD3H_B3: // IT8728F
moel@416	725	case Model.H67A_USB3_B3: // IT8728F
moel@416	726	v.Add(new Voltage("VTT", 0));
moel@416	727	v.Add(new Voltage("+5V", 1, 15, 10));
moel@416	728	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	729	v.Add(new Voltage("CPU VCore", 5));
moel@416	730	v.Add(new Voltage("DRAM", 6));
moel@416	731	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	732	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	733	t.Add(new Temperature("System", 0));
moel@416	734	t.Add(new Temperature("CPU", 2));
moel@416	735	f.Add(new Fan("CPU Fan", 0));
moel@416	736	f.Add(new Fan("System Fan #1", 1));
moel@416	737	f.Add(new Fan("Power Fan", 2));
moel@416	738	f.Add(new Fan("System Fan #2", 3));
moel@416	739	break;
moel@416	740	case Model.Z68A_D3H_B3: // IT8728F
moel@416	741	v.Add(new Voltage("VTT", 0));
moel@416	742	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	743	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	744	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	745	v.Add(new Voltage("CPU VCore", 5));
moel@416	746	v.Add(new Voltage("DRAM", 6));
moel@416	747	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	748	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	749	t.Add(new Temperature("System", 0));
moel@416	750	t.Add(new Temperature("CPU", 2));
moel@416	751	f.Add(new Fan("CPU Fan", 0));
moel@416	752	f.Add(new Fan("System Fan #1", 1));
moel@416	753	f.Add(new Fan("Power Fan", 2));
moel@416	754	f.Add(new Fan("System Fan #2", 3));
moel@416	755	break;
moel@416	756	case Model.P67A_UD3_B3: // IT8728F
moel@416	757	case Model.P67A_UD3R_B3: // IT8728F
moel@416	758	case Model.P67A_UD4_B3: // IT8728F
moel@416	759	case Model.Z68AP_D3: // IT8728F
moel@416	760	case Model.Z68X_UD3H_B3: // IT8728F
moel@416	761	v.Add(new Voltage("VTT", 0));
moel@416	762	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	763	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	764	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	765	v.Add(new Voltage("CPU VCore", 5));
moel@416	766	v.Add(new Voltage("DRAM", 6));
moel@416	767	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	768	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	769	t.Add(new Temperature("System", 0));
moel@416	770	t.Add(new Temperature("CPU", 2));
moel@416	771	f.Add(new Fan("CPU Fan", 0));
moel@416	772	f.Add(new Fan("System Fan #2", 1));
moel@416	773	f.Add(new Fan("Power Fan", 2));
moel@416	774	f.Add(new Fan("System Fan #1", 3));
moel@416	775	break;
moel@416	776	case Model.Z68X_UD7_B3: // IT8728F
moel@416	777	v.Add(new Voltage("VTT", 0));
moel@416	778	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@416	779	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@416	780	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@416	781	v.Add(new Voltage("CPU VCore", 5));
moel@416	782	v.Add(new Voltage("DRAM", 6));
moel@416	783	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	784	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	785	t.Add(new Temperature("System", 0));
moel@416	786	t.Add(new Temperature("CPU", 1));
moel@416	787	t.Add(new Temperature("System 3", 2));
moel@416	788	f.Add(new Fan("CPU Fan", 0));
moel@416	789	f.Add(new Fan("Power Fan", 1));
moel@416	790	f.Add(new Fan("System Fan #1", 2));
moel@416	791	f.Add(new Fan("System Fan #2", 3));
moel@416	792	f.Add(new Fan("System Fan #3", 4));
moel@320	793	break;
moel@177	794	default:
moel@177	795	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	796	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	797	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	798	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	799	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	800	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	801	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	802	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	803	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	804	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	805	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	806	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	807	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	808	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	809	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@177	810	break;
moel@177	811	}
moel@170	812	break;
moel@416	813	case Manufacturer.Shuttle:
moel@416	814	switch (model) {
moel@416	815	case Model.FH67: // IT8772E
moel@416	816	v.Add(new Voltage("CPU VCore", 0));
moel@416	817	v.Add(new Voltage("DRAM", 1));
moel@416	818	v.Add(new Voltage("PCH VCCIO", 2));
moel@416	819	v.Add(new Voltage("CPU VCCIO", 3));
moel@416	820	v.Add(new Voltage("Graphic Voltage", 4));
moel@416	821	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@416	822	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	823	t.Add(new Temperature("System", 0));
moel@416	824	t.Add(new Temperature("CPU", 1));
moel@416	825	f.Add(new Fan("Fan #1", 0));
moel@416	826	f.Add(new Fan("CPU Fan", 1));
moel@416	827	break;
moel@416	828	default:
moel@416	829	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	830	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	831	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	832	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	833	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	834	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	835	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	836	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	837	v.Add(new Voltage("VBat", 8, 10, 10));
moel@416	838	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	839	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	840	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	841	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	842	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	843	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	844	break;
moel@416	845	}
moel@416	846	break;
moel@416	847	default:
moel@416	848	v.Add(new Voltage("Voltage #1", 0, true));
moel@416	849	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	850	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	851	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	852	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	853	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	854	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	855	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@416	856	v.Add(new Voltage("VBat", 8, 10, 10));
moel@130	857	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	858	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	859	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	860	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	861	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	862	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	863	break;
moel@416	864	}
moel@416	865	}
moel@416	866
moel@416	867	private static void GetFintekConfiguration(ISuperIO superIO,
moel@416	868	Manufacturer manufacturer, Model model,
moel@416	869	IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	870	{
moel@416	871	switch (manufacturer) {
moel@416	872	case Manufacturer.EVGA:
moel@416	873	switch (model) {
moel@416	874	case Model.X58_SLI_Classified: // F71882
moel@416	875	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	876	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@416	877	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@416	878	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@416	879	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@416	880	v.Add(new Voltage("+5V", 5, 51, 12));
moel@416	881	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@416	882	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@416	883	v.Add(new Voltage("VBat", 8, 150, 150));
moel@416	884	t.Add(new Temperature("CPU", 0));
moel@416	885	t.Add(new Temperature("VREG", 1));
moel@416	886	t.Add(new Temperature("System", 2));
moel@416	887	f.Add(new Fan("CPU Fan", 0));
moel@416	888	f.Add(new Fan("Power Fan", 1));
moel@416	889	f.Add(new Fan("Chassis Fan", 2));
moel@132	890	break;
moel@132	891	default:
moel@195	892	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	893	v.Add(new Voltage("CPU VCore", 1));
moel@132	894	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	895	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	896	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	897	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	898	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	899	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	900	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	901	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	902	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	903	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	904	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	905	break;
moel@132	906	}
moel@130	907	break;
moel@416	908	default:
moel@416	909	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@416	910	v.Add(new Voltage("CPU VCore", 1));
moel@416	911	v.Add(new Voltage("Voltage #3", 2, true));
moel@416	912	v.Add(new Voltage("Voltage #4", 3, true));
moel@416	913	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	914	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	915	if (superIO.Chip != Chip.F71808E)
moel@416	916	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	917	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@416	918	v.Add(new Voltage("VBat", 8, 150, 150));
moel@416	919	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@416	920	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@416	921	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	922	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	923	break;
moel@416	924	}
moel@416	925	}
moel@130	926
moel@416	927	private static void GetNuvotonConfigurationF(ISuperIO superIO,
moel@416	928	Manufacturer manufacturer, Model model,
moel@416	929	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	930	{
moel@416	931	switch (manufacturer) {
moel@416	932	case Manufacturer.ASUS:
moel@416	933	switch (model) {
moel@416	934	case Model.P8P67: // NCT6776F
moel@416	935	case Model.P8P67_EVO: // NCT6776F
moel@416	936	case Model.P8P67_PRO: // NCT6776F
moel@220	937	v.Add(new Voltage("CPU VCore", 0));
moel@416	938	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	939	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	940	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	941	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	942	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	943	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	944	t.Add(new Temperature("CPU", 0));
moel@416	945	t.Add(new Temperature("Auxiliary", 2));
moel@416	946	t.Add(new Temperature("Motherboard", 3));
moel@416	947	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	948	f.Add(new Fan("CPU Fan", 1));
moel@416	949	f.Add(new Fan("Power Fan", 2));
moel@416	950	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	951	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@416	952	c.Add(new Ctrl("CPU Fan", 1));
moel@416	953	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@416	954	break;
moel@416	955	case Model.P8P67_M_PRO: // NCT6776F
moel@416	956	v.Add(new Voltage("CPU VCore", 0));
moel@416	957	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	958	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	959	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	960	v.Add(new Voltage("+5V", 4, 12, 3));
moel@220	961	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	962	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	963	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	964	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	965	t.Add(new Temperature("CPU", 0));
moel@416	966	t.Add(new Temperature("Motherboard", 3));
moel@416	967	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	968	f.Add(new Fan("CPU Fan", 1));
moel@416	969	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	970	f.Add(new Fan("Power Fan", 3));
moel@416	971	f.Add(new Fan("Auxiliary Fan", 4));
moel@152	972	break;
moel@416	973	case Model.P8Z68_V_PRO: // NCT6776F
moel@416	974	v.Add(new Voltage("CPU VCore", 0));
moel@416	975	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	976	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	977	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	978	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	979	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	980	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	981	t.Add(new Temperature("CPU", 0));
moel@416	982	t.Add(new Temperature("Auxiliary", 2));
moel@416	983	t.Add(new Temperature("Motherboard", 3));
moel@416	984	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	985	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	986	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	987	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@416	988	break;
moel@416	989	case Model.P9X79: // NCT6776F
moel@416	990	v.Add(new Voltage("CPU VCore", 0));
moel@416	991	v.Add(new Voltage("+12V", 1, 11, 1));
moel@416	992	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	993	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	994	v.Add(new Voltage("+5V", 4, 12, 3));
moel@416	995	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	996	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	997	t.Add(new Temperature("CPU", 0));
moel@416	998	t.Add(new Temperature("Motherboard", 3));
moel@416	999	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	1000	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	1001	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	1002	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1003	break;
moel@265	1004	default:
moel@265	1005	v.Add(new Voltage("CPU VCore", 0));
moel@265	1006	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	1007	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	1008	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	1009	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	1010	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	1011	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	1012	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	1013	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	1014	t.Add(new Temperature("CPU Core", 0));
moel@354	1015	t.Add(new Temperature("Temperature #1", 1));
moel@354	1016	t.Add(new Temperature("Temperature #2", 2));
moel@354	1017	t.Add(new Temperature("Temperature #3", 3));
moel@265	1018	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	1019	f.Add(new Fan("Fan #" + (i + 1), i));
moel@383	1020	for (int i = 0; i < superIO.Controls.Length; i++)
moel@383	1021	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@265	1022	break;
moel@265	1023	}
moel@245	1024	break;
moel@416	1025	default:
moel@416	1026	v.Add(new Voltage("CPU VCore", 0));
moel@416	1027	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1028	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1029	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1030	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1031	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1032	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1033	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1034	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1035	t.Add(new Temperature("CPU Core", 0));
moel@416	1036	t.Add(new Temperature("Temperature #1", 1));
moel@416	1037	t.Add(new Temperature("Temperature #2", 2));
moel@416	1038	t.Add(new Temperature("Temperature #3", 3));
moel@416	1039	for (int i = 0; i < superIO.Fans.Length; i++)
moel@416	1040	f.Add(new Fan("Fan #" + (i + 1), i));
moel@416	1041	for (int i = 0; i < superIO.Controls.Length; i++)
moel@416	1042	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@416	1043	break;
moel@416	1044	}
moel@416	1045	}
moel@416	1046
moel@416	1047	private static void GetNuvotonConfigurationD(ISuperIO superIO,
moel@416	1048	Manufacturer manufacturer, Model model,
moel@416	1049	IList<Voltage> v, IList<Temperature> t, IList<Fan> f, IList<Ctrl> c)
moel@416	1050	{
moel@416	1051	switch (manufacturer) {
moel@416	1052	case Manufacturer.ASUS:
moel@416	1053	switch (model) {
moel@416	1054	case Model.P8Z77_V: // NCT6779D
moel@416	1055	v.Add(new Voltage("CPU VCore", 0));
moel@416	1056	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1057	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1058	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1059	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1060	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1061	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1062	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1063	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1064	v.Add(new Voltage("VTT", 9));
moel@416	1065	v.Add(new Voltage("Voltage #11", 10, true));
moel@416	1066	v.Add(new Voltage("Voltage #12", 11, true));
moel@416	1067	v.Add(new Voltage("Voltage #13", 12, true));
moel@416	1068	v.Add(new Voltage("Voltage #14", 13, true));
moel@416	1069	v.Add(new Voltage("Voltage #15", 14, true));
moel@416	1070	t.Add(new Temperature("CPU Core", 0));
moel@416	1071	t.Add(new Temperature("Auxiliary", 1));
moel@416	1072	t.Add(new Temperature("Motherboard", 2));
moel@416	1073	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1074	f.Add(new Fan("CPU Fan", 1));
moel@416	1075	f.Add(new Fan("Chassis Fan #2", 2));
moel@416	1076	f.Add(new Fan("Chassis Fan #3", 3));
moel@416	1077	c.Add(new Ctrl("Chassis Fan #1", 0));
moel@416	1078	c.Add(new Ctrl("CPU Fan", 1));
moel@416	1079	c.Add(new Ctrl("Chassis Fan #2", 2));
moel@416	1080	c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359	1081	break;
moel@359	1082	default:
moel@359	1083	v.Add(new Voltage("CPU VCore", 0));
moel@359	1084	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1085	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1086	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1087	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1088	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1089	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1090	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1091	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1092	v.Add(new Voltage("VTT", 9));
moel@359	1093	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1094	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1095	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1096	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1097	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1098	t.Add(new Temperature("CPU Core", 0));
moel@359	1099	t.Add(new Temperature("Temperature #1", 1));
moel@359	1100	t.Add(new Temperature("Temperature #2", 2));
moel@359	1101	t.Add(new Temperature("Temperature #3", 3));
moel@359	1102	t.Add(new Temperature("Temperature #4", 4));
moel@359	1103	t.Add(new Temperature("Temperature #5", 5));
moel@359	1104	t.Add(new Temperature("Temperature #6", 6));
moel@359	1105	for (int i = 0; i < superIO.Fans.Length; i++)
moel@359	1106	f.Add(new Fan("Fan #" + (i + 1), i));
moel@359	1107	for (int i = 0; i < superIO.Controls.Length; i++)
moel@359	1108	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359	1109	break;
moel@359	1110	}
moel@356	1111	break;
moel@130	1112	default:
moel@416	1113	v.Add(new Voltage("CPU VCore", 0));
moel@416	1114	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1115	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1116	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1117	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1118	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1119	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1120	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1121	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1122	v.Add(new Voltage("VTT", 9));
moel@416	1123	v.Add(new Voltage("Voltage #11", 10, true));
moel@416	1124	v.Add(new Voltage("Voltage #12", 11, true));
moel@416	1125	v.Add(new Voltage("Voltage #13", 12, true));
moel@416	1126	v.Add(new Voltage("Voltage #14", 13, true));
moel@416	1127	v.Add(new Voltage("Voltage #15", 14, true));
moel@416	1128	t.Add(new Temperature("CPU Core", 0));
moel@416	1129	t.Add(new Temperature("Temperature #1", 1));
moel@416	1130	t.Add(new Temperature("Temperature #2", 2));
moel@416	1131	t.Add(new Temperature("Temperature #3", 3));
moel@416	1132	t.Add(new Temperature("Temperature #4", 4));
moel@416	1133	t.Add(new Temperature("Temperature #5", 5));
moel@416	1134	t.Add(new Temperature("Temperature #6", 6));
moel@130	1135	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	1136	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	1137	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	1138	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	1139	break;
moel@130	1140	}
moel@416	1141	}
moel@130	1142
moel@416	1143	private static void GetWinbondConfigurationEHF(Manufacturer manufacturer,
moel@416	1144	Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	1145	{
moel@416	1146	switch (manufacturer) {
moel@416	1147	case Manufacturer.ASRock:
moel@416	1148	switch (model) {
moel@416	1149	case Model.AOD790GX_128M: // W83627EHF
moel@416	1150	v.Add(new Voltage("CPU VCore", 0));
moel@416	1151	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1152	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@416	1153	v.Add(new Voltage("+5V", 5, 20, 10));
moel@416	1154	v.Add(new Voltage("+12V", 6, 28, 5));
moel@416	1155	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1156	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1157	t.Add(new Temperature("CPU", 0));
moel@416	1158	t.Add(new Temperature("Motherboard", 2));
moel@416	1159	f.Add(new Fan("CPU Fan", 0));
moel@416	1160	f.Add(new Fan("Chassis Fan", 1));
moel@416	1161	break;
moel@416	1162	default:
moel@416	1163	v.Add(new Voltage("CPU VCore", 0));
moel@416	1164	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1165	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1166	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1167	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1168	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1169	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1170	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1171	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1172	v.Add(new Voltage("Voltage #10", 9, true));
moel@416	1173	t.Add(new Temperature("CPU", 0));
moel@416	1174	t.Add(new Temperature("Auxiliary", 1));
moel@416	1175	t.Add(new Temperature("System", 2));
moel@416	1176	f.Add(new Fan("System Fan", 0));
moel@416	1177	f.Add(new Fan("CPU Fan", 1));
moel@416	1178	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1179	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1180	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1181	break;
moel@416	1182	} break;
moel@416	1183	default:
moel@416	1184	v.Add(new Voltage("CPU VCore", 0));
moel@416	1185	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1186	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1187	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1188	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1189	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1190	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1191	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1192	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1193	v.Add(new Voltage("Voltage #10", 9, true));
moel@416	1194	t.Add(new Temperature("CPU", 0));
moel@416	1195	t.Add(new Temperature("Auxiliary", 1));
moel@416	1196	t.Add(new Temperature("System", 2));
moel@416	1197	f.Add(new Fan("System Fan", 0));
moel@416	1198	f.Add(new Fan("CPU Fan", 1));
moel@416	1199	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1200	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1201	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1202	break;
moel@130	1203	}
moel@416	1204	}
moel@130	1205
moel@416	1206	private static void GetWinbondConfigurationHG(Manufacturer manufacturer,
moel@416	1207	Model model, IList<Voltage> v, IList<Temperature> t, IList<Fan> f)
moel@416	1208	{
moel@416	1209	switch (manufacturer) {
moel@416	1210	case Manufacturer.ASRock:
moel@416	1211	switch (model) {
moel@416	1212	case Model._880GMH_USB3: // W83627DHG-P
moel@416	1213	v.Add(new Voltage("CPU VCore", 0));
moel@416	1214	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1215	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@416	1216	v.Add(new Voltage("+12V", 6, 56, 10));
moel@416	1217	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1218	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1219	t.Add(new Temperature("CPU", 0));
moel@416	1220	t.Add(new Temperature("Motherboard", 2));
moel@416	1221	f.Add(new Fan("Chassis Fan", 0));
moel@416	1222	f.Add(new Fan("CPU Fan", 1));
moel@416	1223	f.Add(new Fan("Power Fan", 2));
moel@416	1224	break;
moel@416	1225	default:
moel@416	1226	v.Add(new Voltage("CPU VCore", 0));
moel@416	1227	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1228	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1229	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1230	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1231	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1232	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1233	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1234	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1235	t.Add(new Temperature("CPU", 0));
moel@416	1236	t.Add(new Temperature("Auxiliary", 1));
moel@416	1237	t.Add(new Temperature("System", 2));
moel@416	1238	f.Add(new Fan("System Fan", 0));
moel@416	1239	f.Add(new Fan("CPU Fan", 1));
moel@416	1240	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1241	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1242	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1243	break;
moel@416	1244	}
moel@416	1245	break;
moel@416	1246	case Manufacturer.ASUS:
moel@416	1247	switch (model) {
moel@416	1248	case Model.P6T: // W83667HG
moel@416	1249	case Model.P6X58D_E: // W83667HG
moel@416	1250	case Model.Rampage_II_GENE: // W83667HG
moel@416	1251	v.Add(new Voltage("CPU VCore", 0));
moel@416	1252	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@416	1253	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1254	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1255	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@416	1256	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1257	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1258	t.Add(new Temperature("CPU", 0));
moel@416	1259	t.Add(new Temperature("Motherboard", 2));
moel@416	1260	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1261	f.Add(new Fan("CPU Fan", 1));
moel@416	1262	f.Add(new Fan("Power Fan", 2));
moel@416	1263	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	1264	f.Add(new Fan("Chassis Fan #3", 4));
moel@416	1265	break;
moel@416	1266	case Model.Rampage_Extreme: // W83667HG
moel@416	1267	v.Add(new Voltage("CPU VCore", 0));
moel@416	1268	v.Add(new Voltage("+12V", 1, 12, 2));
moel@416	1269	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@416	1270	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@416	1271	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@416	1272	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@416	1273	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1274	t.Add(new Temperature("CPU", 0));
moel@416	1275	t.Add(new Temperature("Motherboard", 2));
moel@416	1276	f.Add(new Fan("Chassis Fan #1", 0));
moel@416	1277	f.Add(new Fan("CPU Fan", 1));
moel@416	1278	f.Add(new Fan("Power Fan", 2));
moel@416	1279	f.Add(new Fan("Chassis Fan #2", 3));
moel@416	1280	f.Add(new Fan("Chassis Fan #3", 4));
moel@416	1281	break;
moel@416	1282	default:
moel@416	1283	v.Add(new Voltage("CPU VCore", 0));
moel@416	1284	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1285	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1286	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1287	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1288	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1289	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1290	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1291	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1292	t.Add(new Temperature("CPU", 0));
moel@416	1293	t.Add(new Temperature("Auxiliary", 1));
moel@416	1294	t.Add(new Temperature("System", 2));
moel@416	1295	f.Add(new Fan("System Fan", 0));
moel@416	1296	f.Add(new Fan("CPU Fan", 1));
moel@416	1297	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1298	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1299	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1300	break;
moel@416	1301	}
moel@416	1302	break;
moel@416	1303	default:
moel@416	1304	v.Add(new Voltage("CPU VCore", 0));
moel@416	1305	v.Add(new Voltage("Voltage #2", 1, true));
moel@416	1306	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@416	1307	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@416	1308	v.Add(new Voltage("Voltage #5", 4, true));
moel@416	1309	v.Add(new Voltage("Voltage #6", 5, true));
moel@416	1310	v.Add(new Voltage("Voltage #7", 6, true));
moel@416	1311	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@416	1312	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@416	1313	t.Add(new Temperature("CPU", 0));
moel@416	1314	t.Add(new Temperature("Auxiliary", 1));
moel@416	1315	t.Add(new Temperature("System", 2));
moel@416	1316	f.Add(new Fan("System Fan", 0));
moel@416	1317	f.Add(new Fan("CPU Fan", 1));
moel@416	1318	f.Add(new Fan("Auxiliary Fan", 2));
moel@416	1319	f.Add(new Fan("CPU Fan #2", 3));
moel@416	1320	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@416	1321	break;
moel@323	1322	}
moel@130	1323	}
moel@130	1324
moel@165	1325	public override HardwareType HardwareType {
moel@165	1326	get { return HardwareType.SuperIO; }
moel@130	1327	}
moel@130	1328
moel@176	1329	public override IHardware Parent {
moel@176	1330	get { return mainboard; }
moel@176	1331	}
moel@176	1332
moel@130	1333
moel@130	1334	public override string GetReport() {
moel@130	1335	return superIO.GetReport();
moel@130	1336	}
moel@130	1337
moel@130	1338	public override void Update() {
moel@130	1339	superIO.Update();
moel@130	1340
moel@130	1341	foreach (Sensor sensor in voltages) {
moel@228	1342	float? value = readVoltage(sensor.Index);
moel@130	1343	if (value.HasValue) {
moel@130	1344	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1345	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1346	ActivateSensor(sensor);
moel@130	1347	}
moel@130	1348	}
moel@130	1349
moel@130	1350	foreach (Sensor sensor in temperatures) {
moel@228	1351	float? value = readTemperature(sensor.Index);
moel@130	1352	if (value.HasValue) {
moel@130	1353	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1354	ActivateSensor(sensor);
moel@130	1355	}
moel@130	1356	}
moel@130	1357
moel@130	1358	foreach (Sensor sensor in fans) {
moel@228	1359	float? value = readFan(sensor.Index);
moel@130	1360	if (value.HasValue) {
moel@130	1361	sensor.Value = value;
moel@130	1362	if (value.Value > 0)
moel@130	1363	ActivateSensor(sensor);
moel@130	1364	}
moel@130	1365	}
moel@228	1366
moel@323	1367	foreach (Sensor sensor in controls) {
moel@323	1368	float? value = readControl(sensor.Index);
moel@389	1369	sensor.Value = value;
moel@323	1370	}
moel@323	1371
moel@228	1372	postUpdate();
moel@130	1373	}
moel@130	1374
moel@323	1375	public override void Close() {
moel@323	1376	foreach (Sensor sensor in controls) {
moel@323	1377	// restore all controls back to default
moel@323	1378	superIO.SetControl(sensor.Index, null);
moel@323	1379	}
moel@323	1380	base.Close();
moel@323	1381	}
moel@323	1382
moel@130	1383	private class Voltage {
moel@130	1384	public readonly string Name;
moel@130	1385	public readonly int Index;
moel@130	1386	public readonly float Ri;
moel@130	1387	public readonly float Rf;
moel@130	1388	public readonly float Vf;
moel@130	1389	public readonly bool Hidden;
moel@130	1390
moel@202	1391	public Voltage(string name, int index) :
moel@202	1392	this(name, index, false) { }
moel@202	1393
moel@130	1394	public Voltage(string name, int index, bool hidden) :
moel@130	1395	this(name, index, 0, 1, 0, hidden) { }
moel@202	1396
moel@202	1397	public Voltage(string name, int index, float ri, float rf) :
moel@202	1398	this(name, index, ri, rf, 0, false) { }
moel@202	1399
moel@202	1400	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1401
moel@195	1402	public Voltage(string name, int index,
moel@202	1403	float ri, float rf, float vf, bool hidden)
moel@195	1404	{
moel@130	1405	this.Name = name;
moel@130	1406	this.Index = index;
moel@130	1407	this.Ri = ri;
moel@130	1408	this.Rf = rf;
moel@130	1409	this.Vf = vf;
moel@130	1410	this.Hidden = hidden;
moel@130	1411	}
moel@130	1412	}
moel@130	1413
moel@130	1414	private class Temperature {
moel@130	1415	public readonly string Name;
moel@130	1416	public readonly int Index;
moel@130	1417
moel@167	1418	public Temperature(string name, int index) {
moel@130	1419	this.Name = name;
moel@130	1420	this.Index = index;
moel@130	1421	}
moel@130	1422	}
moel@130	1423
moel@130	1424	private class Fan {
moel@130	1425	public readonly string Name;
moel@130	1426	public readonly int Index;
moel@130	1427
moel@130	1428	public Fan(string name, int index) {
moel@130	1429	this.Name = name;
moel@130	1430	this.Index = index;
moel@130	1431	}
moel@130	1432	}
moel@323	1433
moel@323	1434	private class Ctrl {
moel@323	1435	public readonly string Name;
moel@323	1436	public readonly int Index;
moel@323	1437
moel@323	1438	public Ctrl(string name, int index) {
moel@323	1439	this.Name = name;
moel@323	1440	this.Index = index;
moel@323	1441	}
moel@323	1442	}
moel@130	1443	}
moel@130	1444	}

author	moel.mich
	Sat, 07 Sep 2013 08:07:11 +0000
changeset 423	47f5dcaf8e9f
parent 413	362c5e77197d
child 428	3c1cdc197b24
permissions	-rw-r--r--