OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@30bb76a1da24 (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@344	7	Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@166	13	using System.Globalization;
moel@228	14	using System.Threading;
moel@130	15	using OpenHardwareMonitor.Hardware.LPC;
moel@130	16
moel@130	17	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	18	internal class SuperIOHardware : Hardware {
moel@130	19
moel@195	20	private readonly Mainboard mainboard;
moel@195	21	private readonly ISuperIO superIO;
moel@130	22
moel@195	23	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	24	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	25	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	26	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	27
moel@228	28	private delegate float? ReadValueDelegate(int index);
moel@228	29	private delegate void UpdateDelegate();
moel@228	30
moel@228	31	// delegates for mainboard specific sensor reading code
moel@228	32	private readonly ReadValueDelegate readVoltage;
moel@228	33	private readonly ReadValueDelegate readTemperature;
moel@228	34	private readonly ReadValueDelegate readFan;
moel@323	35	private readonly ReadValueDelegate readControl;
moel@228	36
moel@228	37	// delegate for post update mainboard specific code
moel@228	38	private readonly UpdateDelegate postUpdate;
moel@228	39
moel@228	40	// mainboard specific mutex
moel@228	41	private readonly Mutex mutex;
moel@228	42
moel@176	43	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	44	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	45	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	46	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	47	settings)
moel@130	48	{
moel@176	49	this.mainboard = mainboard;
moel@130	50	this.superIO = superIO;
moel@130	51
moel@228	52	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	53	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	54	this.readFan = (index) => superIO.Fans[index];
moel@323	55	this.readControl = (index) => superIO.Controls[index];
moel@228	56
moel@228	57	this.postUpdate = () => { };
moel@228	58
moel@130	59	List<Voltage> v = new List<Voltage>();
moel@130	60	List<Temperature> t = new List<Temperature>();
moel@130	61	List<Fan> f = new List<Fan>();
moel@323	62	List<Ctrl> c = new List<Ctrl>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@353	65	case Chip.IT8705F:
moel@130	66	case Chip.IT8712F:
moel@130	67	case Chip.IT8716F:
moel@130	68	case Chip.IT8718F:
moel@177	69	case Chip.IT8720F:
moel@319	70	case Chip.IT8726F:
moel@130	71	switch (manufacturer) {
moel@133	72	case Manufacturer.ASUS:
moel@133	73	switch (model) {
moel@168	74	case Model.Crosshair_III_Formula: // IT8720F
moel@133	75	v.Add(new Voltage("VBat", 8));
moel@133	76	t.Add(new Temperature("CPU", 0));
moel@133	77	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	78	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	79	break;
moel@144	80	case Model.M2N_SLI_DELUXE:
moel@133	81	v.Add(new Voltage("CPU VCore", 0));
moel@133	82	v.Add(new Voltage("+3.3V", 1));
moel@195	83	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	84	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	85	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	86	v.Add(new Voltage("VBat", 8));
moel@133	87	t.Add(new Temperature("CPU", 0));
moel@133	88	t.Add(new Temperature("Motherboard", 1));
moel@133	89	f.Add(new Fan("CPU Fan", 0));
moel@133	90	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	91	f.Add(new Fan("Power Fan", 2));
moel@133	92	break;
moel@168	93	case Model.M4A79XTD_EVO: // IT8720F
moel@195	94	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	95	v.Add(new Voltage("VBat", 8));
moel@144	96	t.Add(new Temperature("CPU", 0));
moel@144	97	t.Add(new Temperature("Motherboard", 1));
moel@144	98	f.Add(new Fan("CPU Fan", 0));
moel@144	99	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	100	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	101	break;
moel@133	102	default:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	105	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	106	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	107	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	108	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	109	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	110	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	111	v.Add(new Voltage("VBat", 8));
moel@133	112	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	113	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	114	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	115	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	116	break;
moel@133	117	}
moel@133	118	break;
moel@221	119
moel@221	120	case Manufacturer.ASRock:
moel@221	121	switch (model) {
moel@221	122	case Model.P55_Deluxe: // IT8720F
moel@228	123
moel@221	124	v.Add(new Voltage("CPU VCore", 0));
moel@221	125	v.Add(new Voltage("+3.3V", 2));
moel@221	126	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	127	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	128	v.Add(new Voltage("VBat", 8));
moel@221	129	t.Add(new Temperature("CPU", 0));
moel@221	130	t.Add(new Temperature("Motherboard", 1));
moel@221	131	f.Add(new Fan("CPU Fan", 0));
moel@221	132	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	133
moel@228	134	// this mutex is also used by the official ASRock tool
moel@228	135	mutex = new Mutex(false, "ASRockOCMark");
moel@228	136
moel@228	137	bool exclusiveAccess = false;
moel@228	138	try {
moel@228	139	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	140	} catch (AbandonedMutexException) { }
moel@228	141	catch (InvalidOperationException) { }
moel@228	142
moel@228	143	// only read additional fans if we get exclusive access
moel@228	144	if (exclusiveAccess) {
moel@228	145
moel@228	146	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	147	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	148	f.Add(new Fan("Power Fan", 4));
moel@228	149
moel@228	150	readFan = (index) => {
moel@228	151	if (index < 2) {
moel@228	152	return superIO.Fans[index];
moel@228	153	} else {
moel@228	154	// get GPIO 80-87
moel@228	155	byte? gpio = superIO.ReadGPIO(7);
moel@228	156	if (!gpio.HasValue)
moel@228	157	return null;
moel@228	158
moel@228	159	// read the last 3 fans based on GPIO 83-85
moel@228	160	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	161	return (((gpio.Value >> 3) & 0x07) ==
moel@228	162	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	163	}
moel@228	164	};
moel@228	165
moel@228	166	int fanIndex = 0;
moel@228	167	postUpdate = () => {
moel@228	168	// get GPIO 80-87
moel@228	169	byte? gpio = superIO.ReadGPIO(7);
moel@228	170	if (!gpio.HasValue)
moel@228	171	return;
moel@228	172
moel@228	173	// prepare the GPIO 83-85 for the next update
moel@228	174	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	175	superIO.WriteGPIO(7,
moel@228	176	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	177	fanIndex = (fanIndex + 1) % 3;
moel@228	178	};
moel@228	179	}
moel@228	180
moel@221	181	break;
moel@221	182	default:
moel@221	183	v.Add(new Voltage("CPU VCore", 0));
moel@221	184	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	185	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	186	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	187	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	188	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	189	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	190	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	191	v.Add(new Voltage("VBat", 8));
moel@221	192	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	193	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	194	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	195	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	196	break;
moel@221	197	};
moel@221	198	break;
moel@221	199
moel@130	200	case Manufacturer.DFI:
moel@130	201	switch (model) {
moel@168	202	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	203	v.Add(new Voltage("CPU VCore", 0));
moel@130	204	v.Add(new Voltage("FSB VTT", 1));
moel@130	205	v.Add(new Voltage("+3.3V", 2));
moel@195	206	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	207	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	208	v.Add(new Voltage("NB Core", 5));
moel@130	209	v.Add(new Voltage("VDIMM", 6));
moel@195	210	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	211	v.Add(new Voltage("VBat", 8));
moel@130	212	t.Add(new Temperature("CPU", 0));
moel@130	213	t.Add(new Temperature("System", 1));
moel@130	214	t.Add(new Temperature("Chipset", 2));
moel@130	215	f.Add(new Fan("Fan #1", 0));
moel@130	216	f.Add(new Fan("Fan #2", 1));
moel@130	217	f.Add(new Fan("Fan #3", 2));
moel@130	218	break;
moel@168	219	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	220	v.Add(new Voltage("CPU VCore", 0));
moel@130	221	v.Add(new Voltage("VTT", 1));
moel@130	222	v.Add(new Voltage("+3.3V", 2));
moel@195	223	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	224	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	225	v.Add(new Voltage("CPU PLL", 5));
moel@130	226	v.Add(new Voltage("DRAM", 6));
moel@195	227	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	228	v.Add(new Voltage("VBat", 8));
moel@130	229	t.Add(new Temperature("Chipset", 0));
moel@130	230	t.Add(new Temperature("CPU PWM", 1));
moel@130	231	t.Add(new Temperature("CPU", 2));
moel@130	232	f.Add(new Fan("Fan #1", 0));
moel@130	233	f.Add(new Fan("Fan #2", 1));
moel@130	234	f.Add(new Fan("Fan #3", 2));
moel@130	235	break;
moel@130	236	default:
moel@130	237	v.Add(new Voltage("CPU VCore", 0));
moel@130	238	v.Add(new Voltage("VTT", 1, true));
moel@130	239	v.Add(new Voltage("+3.3V", 2, true));
moel@130	240	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	241	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	242	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	243	v.Add(new Voltage("DRAM", 6, true));
moel@130	244	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	245	v.Add(new Voltage("VBat", 8));
moel@130	246	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	247	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	248	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	249	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	250	break;
moel@130	251	}
moel@130	252	break;
moel@130	253
moel@130	254	case Manufacturer.Gigabyte:
moel@130	255	switch (model) {
moel@168	256	case Model._965P_S3: // IT8718F
moel@130	257	v.Add(new Voltage("CPU VCore", 0));
moel@130	258	v.Add(new Voltage("DRAM", 1));
moel@130	259	v.Add(new Voltage("+3.3V", 2));
moel@195	260	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	261	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	262	v.Add(new Voltage("VBat", 8));
moel@130	263	t.Add(new Temperature("System", 0));
moel@130	264	t.Add(new Temperature("CPU", 1));
moel@130	265	f.Add(new Fan("CPU Fan", 0));
moel@130	266	f.Add(new Fan("System Fan", 1));
moel@130	267	break;
moel@168	268	case Model.EP45_DS3R: // IT8718F
moel@130	269	case Model.EP45_UD3R:
moel@138	270	case Model.X38_DS5:
moel@130	271	v.Add(new Voltage("CPU VCore", 0));
moel@130	272	v.Add(new Voltage("DRAM", 1));
moel@130	273	v.Add(new Voltage("+3.3V", 2));
moel@195	274	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	275	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	276	v.Add(new Voltage("VBat", 8));
moel@130	277	t.Add(new Temperature("System", 0));
moel@130	278	t.Add(new Temperature("CPU", 1));
moel@130	279	f.Add(new Fan("CPU Fan", 0));
moel@130	280	f.Add(new Fan("System Fan #2", 1));
moel@130	281	f.Add(new Fan("Power Fan", 2));
moel@130	282	f.Add(new Fan("System Fan #1", 3));
moel@130	283	break;
moel@357	284	case Model.EX58_EXTREME: // IT8720F
moel@133	285	v.Add(new Voltage("CPU VCore", 0));
moel@133	286	v.Add(new Voltage("DRAM", 1));
moel@195	287	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	288	v.Add(new Voltage("VBat", 8));
moel@133	289	t.Add(new Temperature("System", 0));
moel@133	290	t.Add(new Temperature("CPU", 1));
moel@138	291	t.Add(new Temperature("Northbridge", 2));
moel@133	292	f.Add(new Fan("CPU Fan", 0));
moel@133	293	f.Add(new Fan("System Fan #2", 1));
moel@133	294	f.Add(new Fan("Power Fan", 2));
moel@133	295	f.Add(new Fan("System Fan #1", 3));
moel@133	296	break;
moel@168	297	case Model.P35_DS3: // IT8718F
moel@168	298	case Model.P35_DS3L: // IT8718F
moel@130	299	v.Add(new Voltage("CPU VCore", 0));
moel@130	300	v.Add(new Voltage("DRAM", 1));
moel@130	301	v.Add(new Voltage("+3.3V", 2));
moel@195	302	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	303	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130	304	v.Add(new Voltage("VBat", 8));
moel@130	305	t.Add(new Temperature("System", 0));
moel@130	306	t.Add(new Temperature("CPU", 1));
moel@130	307	f.Add(new Fan("CPU Fan", 0));
moel@130	308	f.Add(new Fan("System Fan #1", 1));
moel@130	309	f.Add(new Fan("System Fan #2", 2));
moel@130	310	f.Add(new Fan("Power Fan", 3));
moel@130	311	break;
moel@168	312	case Model.P55_UD4: // IT8720F
moel@357	313	case Model.P55A_UD3: // IT8720F
moel@357	314	case Model.P55M_UD4: // IT8720F
moel@357	315	case Model.H55_USB3: // IT8720F
moel@357	316	case Model.EX58_UD3R: // IT8720F
moel@148	317	v.Add(new Voltage("CPU VCore", 0));
moel@148	318	v.Add(new Voltage("DRAM", 1));
moel@148	319	v.Add(new Voltage("+3.3V", 2));
moel@195	320	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	321	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@148	322	v.Add(new Voltage("VBat", 8));
moel@148	323	t.Add(new Temperature("System", 0));
moel@148	324	t.Add(new Temperature("CPU", 2));
moel@148	325	f.Add(new Fan("CPU Fan", 0));
moel@148	326	f.Add(new Fan("System Fan #2", 1));
moel@148	327	f.Add(new Fan("Power Fan", 2));
moel@148	328	f.Add(new Fan("System Fan #1", 3));
moel@148	329	break;
moel@357	330	case Model.H55N_USB3: // IT8720F
moel@154	331	v.Add(new Voltage("CPU VCore", 0));
moel@154	332	v.Add(new Voltage("DRAM", 1));
moel@154	333	v.Add(new Voltage("+3.3V", 2));
moel@195	334	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	335	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@357	336	v.Add(new Voltage("VBat", 8));
moel@357	337	t.Add(new Temperature("System", 0));
moel@357	338	t.Add(new Temperature("CPU", 2));
moel@357	339	f.Add(new Fan("CPU Fan", 0));
moel@357	340	f.Add(new Fan("System Fan", 1));
moel@357	341	break;
moel@357	342	case Model.G41M_Combo: // IT8718F
moel@357	343	case Model.G41MT_S2: // IT8718F
moel@357	344	case Model.G41MT_S2P: // IT8718F
moel@357	345	v.Add(new Voltage("CPU VCore", 0));
moel@357	346	v.Add(new Voltage("DRAM", 1));
moel@357	347	v.Add(new Voltage("+3.3V", 2));
moel@357	348	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	349	v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@357	350	v.Add(new Voltage("VBat", 8));
moel@357	351	t.Add(new Temperature("CPU", 2));
moel@357	352	f.Add(new Fan("CPU Fan", 0));
moel@357	353	f.Add(new Fan("System Fan", 1));
moel@357	354	break;
moel@357	355	case Model.GA_MA770T_UD3: // IT8720F
moel@359	356	case Model.GA_MA770T_UD3P: // IT8720F
moel@357	357	case Model.GA_MA790X_UD3P: // IT8720F
moel@357	358	v.Add(new Voltage("CPU VCore", 0));
moel@357	359	v.Add(new Voltage("DRAM", 1));
moel@357	360	v.Add(new Voltage("+3.3V", 2));
moel@357	361	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	362	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@154	363	v.Add(new Voltage("VBat", 8));
moel@154	364	t.Add(new Temperature("System", 0));
moel@154	365	t.Add(new Temperature("CPU", 1));
moel@154	366	f.Add(new Fan("CPU Fan", 0));
moel@154	367	f.Add(new Fan("System Fan #1", 1));
moel@154	368	f.Add(new Fan("System Fan #2", 2));
moel@154	369	f.Add(new Fan("Power Fan", 3));
moel@154	370	break;
moel@359	371	case Model.GA_MA78LM_S2H: // IT8718F
moel@359	372	v.Add(new Voltage("CPU VCore", 0));
moel@359	373	v.Add(new Voltage("DRAM", 1));
moel@359	374	v.Add(new Voltage("+3.3V", 2));
moel@359	375	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@359	376	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@359	377	v.Add(new Voltage("VBat", 8));
moel@359	378	t.Add(new Temperature("System", 0));
moel@359	379	t.Add(new Temperature("CPU", 1));
moel@359	380	t.Add(new Temperature("VRM", 2));
moel@359	381	f.Add(new Fan("CPU Fan", 0));
moel@359	382	f.Add(new Fan("System Fan #1", 1));
moel@359	383	f.Add(new Fan("System Fan #2", 2));
moel@359	384	f.Add(new Fan("Power Fan", 3));
moel@359	385	break;
moel@357	386	case Model.GA_MA785GM_US2H: // IT8718F
moel@168	387	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	388	v.Add(new Voltage("CPU VCore", 0));
moel@130	389	v.Add(new Voltage("DRAM", 1));
moel@130	390	v.Add(new Voltage("+3.3V", 2));
moel@195	391	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	392	v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@130	393	v.Add(new Voltage("VBat", 8));
moel@130	394	t.Add(new Temperature("System", 0));
moel@130	395	t.Add(new Temperature("CPU", 1));
moel@130	396	f.Add(new Fan("CPU Fan", 0));
moel@130	397	f.Add(new Fan("System Fan", 1));
moel@130	398	f.Add(new Fan("NB Fan", 2));
moel@130	399	break;
moel@168	400	case Model.X58A_UD3R: // IT8720F
moel@138	401	v.Add(new Voltage("CPU VCore", 0));
moel@138	402	v.Add(new Voltage("DRAM", 1));
moel@138	403	v.Add(new Voltage("+3.3V", 2));
moel@195	404	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357	405	v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@138	406	v.Add(new Voltage("VBat", 8));
moel@138	407	t.Add(new Temperature("System", 0));
moel@138	408	t.Add(new Temperature("CPU", 1));
moel@138	409	t.Add(new Temperature("Northbridge", 2));
moel@138	410	f.Add(new Fan("CPU Fan", 0));
moel@138	411	f.Add(new Fan("System Fan #2", 1));
moel@138	412	f.Add(new Fan("Power Fan", 2));
moel@138	413	f.Add(new Fan("System Fan #1", 3));
moel@138	414	break;
moel@130	415	default:
moel@130	416	v.Add(new Voltage("CPU VCore", 0));
moel@130	417	v.Add(new Voltage("DRAM", 1, true));
moel@130	418	v.Add(new Voltage("+3.3V", 2, true));
moel@130	419	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	420	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	421	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	422	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	423	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	424	v.Add(new Voltage("VBat", 8));
moel@130	425	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	426	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	427	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	428	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	429	break;
moel@130	430	}
moel@130	431	break;
moel@130	432
moel@130	433	default:
moel@130	434	v.Add(new Voltage("CPU VCore", 0));
moel@130	435	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	436	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	437	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	438	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	439	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	440	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	441	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	442	v.Add(new Voltage("VBat", 8));
moel@130	443	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	444	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	445	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	446	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	447	break;
moel@130	448	}
moel@130	449	break;
moel@170	450
moel@170	451	case Chip.IT8721F:
moel@277	452	case Chip.IT8728F:
moel@341	453	case Chip.IT8771E:
moel@319	454	case Chip.IT8772E:
moel@177	455	switch (manufacturer) {
moel@177	456	case Manufacturer.ECS:
moel@177	457	switch (model) {
moel@177	458	case Model.A890GXM_A: // IT8721F
moel@177	459	v.Add(new Voltage("CPU VCore", 0));
moel@177	460	v.Add(new Voltage("VDIMM", 1));
moel@177	461	v.Add(new Voltage("NB Voltage", 2));
moel@195	462	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	463	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	464	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	465	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	466	t.Add(new Temperature("CPU", 0));
moel@177	467	t.Add(new Temperature("System", 1));
moel@177	468	t.Add(new Temperature("Northbridge", 2));
moel@177	469	f.Add(new Fan("CPU Fan", 0));
moel@177	470	f.Add(new Fan("System Fan", 1));
moel@177	471	f.Add(new Fan("Power Fan", 2));
moel@177	472	break;
moel@177	473	default:
moel@177	474	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	475	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	476	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	477	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	478	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	479	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	480	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	481	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	482	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	483	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	484	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	485	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	486	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	487	break;
moel@177	488	}
moel@177	489	break;
moel@278	490	case Manufacturer.Gigabyte:
moel@278	491	switch (model) {
moel@357	492	case Model.H61M_DS2_REV_1_2: // IT8728F
moel@357	493	case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@357	494	v.Add(new Voltage("VTT", 0));
moel@357	495	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@278	496	v.Add(new Voltage("CPU VCore", 5));
moel@278	497	v.Add(new Voltage("DRAM", 6));
moel@278	498	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	499	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	500	t.Add(new Temperature("System", 0));
moel@278	501	t.Add(new Temperature("CPU", 2));
moel@278	502	f.Add(new Fan("CPU Fan", 0));
moel@357	503	f.Add(new Fan("System Fan", 1));
moel@278	504	break;
moel@290	505	case Model.H67A_UD3H_B3: // IT8728F
moel@357	506	case Model.H67A_USB3_B3: // IT8728F
moel@290	507	v.Add(new Voltage("VTT", 0));
moel@290	508	v.Add(new Voltage("+5V", 1, 15, 10));
moel@357	509	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@290	510	v.Add(new Voltage("CPU VCore", 5));
moel@290	511	v.Add(new Voltage("DRAM", 6));
moel@290	512	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290	513	v.Add(new Voltage("VBat", 8, 10, 10));
moel@290	514	t.Add(new Temperature("System", 0));
moel@290	515	t.Add(new Temperature("CPU", 2));
moel@290	516	f.Add(new Fan("CPU Fan", 0));
moel@290	517	f.Add(new Fan("System Fan #1", 1));
moel@290	518	f.Add(new Fan("Power Fan", 2));
moel@290	519	f.Add(new Fan("System Fan #2", 3));
moel@290	520	break;
moel@357	521	case Model.Z68A_D3H_B3: // IT8728F
moel@357	522	v.Add(new Voltage("VTT", 0));
moel@357	523	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	524	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	525	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357	526	v.Add(new Voltage("CPU VCore", 5));
moel@357	527	v.Add(new Voltage("DRAM", 6));
moel@357	528	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357	529	v.Add(new Voltage("VBat", 8, 10, 10));
moel@357	530	t.Add(new Temperature("System", 0));
moel@357	531	t.Add(new Temperature("CPU", 2));
moel@357	532	f.Add(new Fan("CPU Fan", 0));
moel@357	533	f.Add(new Fan("System Fan #1", 1));
moel@357	534	f.Add(new Fan("Power Fan", 2));
moel@357	535	f.Add(new Fan("System Fan #2", 3));
moel@357	536	break;
moel@357	537	case Model.P67A_UD3_B3: // IT8728F
moel@357	538	case Model.P67A_UD3R_B3: // IT8728F
moel@357	539	case Model.P67A_UD4_B3: // IT8728F
moel@357	540	case Model.Z68AP_D3: // IT8728F
moel@357	541	case Model.Z68X_UD3H_B3: // IT8728F
moel@357	542	v.Add(new Voltage("VTT", 0));
moel@357	543	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	544	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	545	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357	546	v.Add(new Voltage("CPU VCore", 5));
moel@357	547	v.Add(new Voltage("DRAM", 6));
moel@357	548	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357	549	v.Add(new Voltage("VBat", 8, 10, 10));
moel@357	550	t.Add(new Temperature("System", 0));
moel@357	551	t.Add(new Temperature("CPU", 2));
moel@357	552	f.Add(new Fan("CPU Fan", 0));
moel@357	553	f.Add(new Fan("System Fan #2", 1));
moel@357	554	f.Add(new Fan("Power Fan", 2));
moel@357	555	f.Add(new Fan("System Fan #1", 3));
moel@357	556	break;
moel@305	557	case Model.Z68X_UD7_B3: // IT8728F
moel@305	558	v.Add(new Voltage("VTT", 0));
moel@357	559	v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357	560	v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357	561	v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@305	562	v.Add(new Voltage("CPU VCore", 5));
moel@305	563	v.Add(new Voltage("DRAM", 6));
moel@305	564	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305	565	v.Add(new Voltage("VBat", 8, 10, 10));
moel@305	566	t.Add(new Temperature("System", 0));
moel@305	567	t.Add(new Temperature("CPU", 1));
moel@305	568	t.Add(new Temperature("System 3", 2));
moel@305	569	f.Add(new Fan("CPU Fan", 0));
moel@305	570	f.Add(new Fan("Power Fan", 1));
moel@305	571	f.Add(new Fan("System Fan #1", 2));
moel@305	572	f.Add(new Fan("System Fan #2", 3));
moel@305	573	f.Add(new Fan("System Fan #3", 4));
moel@305	574	break;
moel@278	575	default:
moel@278	576	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	577	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	578	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	579	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	580	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	581	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	582	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	583	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	584	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	585	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	586	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	587	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	588	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	589	break;
moel@278	590	}
moel@278	591	break;
moel@320	592	case Manufacturer.Shuttle:
moel@320	593	switch (model) {
moel@320	594	case Model.FH67: // IT8772E
moel@320	595	v.Add(new Voltage("CPU VCore", 0));
moel@320	596	v.Add(new Voltage("DRAM", 1));
moel@320	597	v.Add(new Voltage("PCH VCCIO", 2));
moel@320	598	v.Add(new Voltage("CPU VCCIO", 3));
moel@320	599	v.Add(new Voltage("Graphic Voltage", 4));
moel@320	600	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320	601	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	602	t.Add(new Temperature("System", 0));
moel@320	603	t.Add(new Temperature("CPU", 1));
moel@320	604	f.Add(new Fan("Fan #1", 0));
moel@320	605	f.Add(new Fan("CPU Fan", 1));
moel@320	606	break;
moel@320	607	default:
moel@320	608	v.Add(new Voltage("Voltage #1", 0, true));
moel@320	609	v.Add(new Voltage("Voltage #2", 1, true));
moel@320	610	v.Add(new Voltage("Voltage #3", 2, true));
moel@320	611	v.Add(new Voltage("Voltage #4", 3, true));
moel@320	612	v.Add(new Voltage("Voltage #5", 4, true));
moel@320	613	v.Add(new Voltage("Voltage #6", 5, true));
moel@320	614	v.Add(new Voltage("Voltage #7", 6, true));
moel@320	615	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320	616	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	617	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320	618	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320	619	for (int i = 0; i < superIO.Fans.Length; i++)
moel@320	620	f.Add(new Fan("Fan #" + (i + 1), i));
moel@320	621	break;
moel@320	622	}
moel@320	623	break;
moel@177	624	default:
moel@177	625	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	626	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	627	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	628	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	629	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	630	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	631	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	632	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	633	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	634	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	635	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	636	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	637	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	638	break;
moel@177	639	}
moel@170	640	break;
moel@130	641
moel@130	642	case Chip.F71858:
moel@195	643	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	644	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	645	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	646	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	647	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	648	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	649	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	650	break;
moel@130	651	case Chip.F71862:
moel@130	652	case Chip.F71869:
moel@130	653	case Chip.F71882:
moel@296	654	case Chip.F71889AD:
moel@130	655	case Chip.F71889ED:
moel@130	656	case Chip.F71889F:
moel@352	657	case Chip.F71808E:
moel@132	658	switch (manufacturer) {
moel@132	659	case Manufacturer.EVGA:
moel@132	660	switch (model) {
moel@168	661	case Model.X58_SLI_Classified: // F71882
moel@195	662	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	663	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	664	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	665	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	666	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	667	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	668	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	669	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	670	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	671	t.Add(new Temperature("CPU", 0));
moel@132	672	t.Add(new Temperature("VREG", 1));
moel@132	673	t.Add(new Temperature("System", 2));
moel@132	674	f.Add(new Fan("CPU Fan", 0));
moel@132	675	f.Add(new Fan("Power Fan", 1));
moel@132	676	f.Add(new Fan("Chassis Fan", 2));
moel@132	677	break;
moel@132	678	default:
moel@195	679	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	680	v.Add(new Voltage("CPU VCore", 1));
moel@132	681	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	682	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	683	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	684	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	685	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	686	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	687	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	688	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	689	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	690	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	691	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	692	break;
moel@132	693	}
moel@132	694	break;
moel@132	695	default:
moel@195	696	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	697	v.Add(new Voltage("CPU VCore", 1));
moel@132	698	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	699	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	700	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	701	v.Add(new Voltage("Voltage #6", 5, true));
moel@352	702	if (superIO.Chip != Chip.F71808E)
moel@352	703	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	704	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	705	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	706	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	707	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	708	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	709	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	710	break;
moel@132	711	}
moel@130	712	break;
moel@130	713
moel@220	714	case Chip.W83627EHF:
moel@220	715	switch (manufacturer) {
moel@220	716	case Manufacturer.ASRock:
moel@220	717	switch (model) {
moel@220	718	case Model.AOD790GX_128M: // W83627EHF
moel@220	719	v.Add(new Voltage("CPU VCore", 0));
moel@220	720	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	721	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	722	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	723	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	724	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	725	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	726	t.Add(new Temperature("CPU", 0));
moel@220	727	t.Add(new Temperature("Motherboard", 2));
moel@221	728	f.Add(new Fan("CPU Fan", 0));
moel@221	729	f.Add(new Fan("Chassis Fan", 1));
moel@220	730	break;
moel@220	731	default:
moel@220	732	v.Add(new Voltage("CPU VCore", 0));
moel@220	733	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	734	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	735	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	736	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	737	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	738	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	739	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	740	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	741	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	742	t.Add(new Temperature("CPU", 0));
moel@220	743	t.Add(new Temperature("Auxiliary", 1));
moel@220	744	t.Add(new Temperature("System", 2));
moel@220	745	f.Add(new Fan("System Fan", 0));
moel@220	746	f.Add(new Fan("CPU Fan", 1));
moel@220	747	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	748	f.Add(new Fan("CPU Fan #2", 3));
moel@220	749	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	750	break;
moel@220	751	} break;
moel@220	752	default:
moel@220	753	v.Add(new Voltage("CPU VCore", 0));
moel@220	754	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	755	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	756	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	757	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	758	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	759	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	760	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	761	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	762	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	763	t.Add(new Temperature("CPU", 0));
moel@220	764	t.Add(new Temperature("Auxiliary", 1));
moel@220	765	t.Add(new Temperature("System", 2));
moel@220	766	f.Add(new Fan("System Fan", 0));
moel@220	767	f.Add(new Fan("CPU Fan", 1));
moel@220	768	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	769	f.Add(new Fan("CPU Fan #2", 3));
moel@220	770	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	771	break;
moel@220	772	}
moel@130	773	break;
moel@130	774	case Chip.W83627DHG:
moel@130	775	case Chip.W83627DHGP:
moel@130	776	case Chip.W83667HG:
moel@130	777	case Chip.W83667HGB:
moel@152	778	switch (manufacturer) {
moel@153	779	case Manufacturer.ASRock:
moel@153	780	switch (model) {
moel@168	781	case Model._880GMH_USB3: // W83627DHG-P
moel@153	782	v.Add(new Voltage("CPU VCore", 0));
moel@195	783	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	784	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	785	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	786	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	787	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	788	t.Add(new Temperature("CPU", 0));
moel@153	789	t.Add(new Temperature("Motherboard", 2));
moel@153	790	f.Add(new Fan("Chassis Fan", 0));
moel@153	791	f.Add(new Fan("CPU Fan", 1));
moel@153	792	f.Add(new Fan("Power Fan", 2));
moel@153	793	break;
moel@153	794	default:
moel@153	795	v.Add(new Voltage("CPU VCore", 0));
moel@153	796	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	797	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	798	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	799	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	800	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	801	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	802	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	803	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	804	t.Add(new Temperature("CPU", 0));
moel@153	805	t.Add(new Temperature("Auxiliary", 1));
moel@153	806	t.Add(new Temperature("System", 2));
moel@153	807	f.Add(new Fan("System Fan", 0));
moel@153	808	f.Add(new Fan("CPU Fan", 1));
moel@153	809	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	810	f.Add(new Fan("CPU Fan #2", 3));
moel@153	811	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	812	break;
moel@153	813	}
moel@153	814	break;
moel@152	815	case Manufacturer.ASUS:
moel@152	816	switch (model) {
moel@336	817	case Model.P6T: // W83667HG
moel@174	818	case Model.P6X58D_E: // W83667HG
moel@174	819	case Model.Rampage_II_GENE: // W83667HG
moel@152	820	v.Add(new Voltage("CPU VCore", 0));
moel@195	821	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	822	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	823	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	824	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	825	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	826	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	827	t.Add(new Temperature("CPU", 0));
moel@174	828	t.Add(new Temperature("Motherboard", 2));
moel@174	829	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	830	f.Add(new Fan("CPU Fan", 1));
moel@174	831	f.Add(new Fan("Power Fan", 2));
moel@174	832	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	833	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	834	break;
moel@174	835	case Model.Rampage_Extreme: // W83667HG
moel@174	836	v.Add(new Voltage("CPU VCore", 0));
moel@195	837	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	838	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	839	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	840	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	841	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	842	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	843	t.Add(new Temperature("CPU", 0));
moel@152	844	t.Add(new Temperature("Motherboard", 2));
moel@152	845	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	846	f.Add(new Fan("CPU Fan", 1));
moel@153	847	f.Add(new Fan("Power Fan", 2));
moel@152	848	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	849	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	850	break;
moel@152	851	default:
moel@152	852	v.Add(new Voltage("CPU VCore", 0));
moel@152	853	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	854	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	855	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	856	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	857	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	858	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	859	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	860	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	861	t.Add(new Temperature("CPU", 0));
moel@152	862	t.Add(new Temperature("Auxiliary", 1));
moel@152	863	t.Add(new Temperature("System", 2));
moel@153	864	f.Add(new Fan("System Fan", 0));
moel@153	865	f.Add(new Fan("CPU Fan", 1));
moel@153	866	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	867	f.Add(new Fan("CPU Fan #2", 3));
moel@153	868	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	869	break;
moel@152	870	}
moel@152	871	break;
moel@152	872	default:
moel@152	873	v.Add(new Voltage("CPU VCore", 0));
moel@152	874	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	875	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	876	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	877	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	878	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	879	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	880	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	881	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	882	t.Add(new Temperature("CPU", 0));
moel@152	883	t.Add(new Temperature("Auxiliary", 1));
moel@152	884	t.Add(new Temperature("System", 2));
moel@153	885	f.Add(new Fan("System Fan", 0));
moel@153	886	f.Add(new Fan("CPU Fan", 1));
moel@153	887	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	888	f.Add(new Fan("CPU Fan #2", 3));
moel@153	889	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	890	break;
moel@152	891	}
moel@130	892	break;
moel@130	893	case Chip.W83627HF:
moel@130	894	case Chip.W83627THF:
moel@130	895	case Chip.W83687THF:
moel@130	896	v.Add(new Voltage("CPU VCore", 0));
moel@130	897	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	898	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	899	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	900	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	901	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	902	v.Add(new Voltage("VBAT", 6));
moel@130	903	t.Add(new Temperature("CPU", 0));
moel@130	904	t.Add(new Temperature("Auxiliary", 1));
moel@130	905	t.Add(new Temperature("System", 2));
moel@153	906	f.Add(new Fan("System Fan", 0));
moel@153	907	f.Add(new Fan("CPU Fan", 1));
moel@153	908	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	909	break;
moel@245	910	case Chip.NCT6771F:
moel@265	911	case Chip.NCT6776F:
moel@265	912	switch (manufacturer) {
moel@265	913	case Manufacturer.ASUS:
moel@265	914	switch (model) {
moel@312	915	case Model.P8P67: // NCT6776F
moel@311	916	case Model.P8P67_EVO: // NCT6776F
moel@265	917	case Model.P8P67_PRO: // NCT6776F
moel@265	918	v.Add(new Voltage("CPU VCore", 0));
moel@310	919	v.Add(new Voltage("+12V", 1, 11, 1));
moel@310	920	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	921	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310	922	v.Add(new Voltage("+5V", 4, 12, 3));
moel@310	923	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265	924	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310	925	t.Add(new Temperature("CPU", 0));
moel@276	926	t.Add(new Temperature("Auxiliary", 2));
moel@310	927	t.Add(new Temperature("Motherboard", 3));
moel@310	928	f.Add(new Fan("Chassis Fan #1", 0));
moel@265	929	f.Add(new Fan("CPU Fan", 1));
moel@310	930	f.Add(new Fan("Power Fan", 2));
moel@310	931	f.Add(new Fan("Chassis Fan #2", 3));
moel@323	932	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323	933	c.Add(new Ctrl("CPU Fan", 1));
moel@323	934	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265	935	break;
moel@276	936	case Model.P8P67_M_PRO: // NCT6776F
moel@276	937	v.Add(new Voltage("CPU VCore", 0));
moel@276	938	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	939	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	940	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276	941	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	942	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	943	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	944	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	945	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	946	t.Add(new Temperature("CPU", 0));
moel@276	947	t.Add(new Temperature("Motherboard", 3));
moel@276	948	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	949	f.Add(new Fan("CPU Fan", 1));
moel@276	950	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	951	f.Add(new Fan("Power Fan", 3));
moel@276	952	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	953	break;
moel@337	954	case Model.P8Z68_V_PRO: // NCT6776F
moel@337	955	v.Add(new Voltage("CPU VCore", 0));
moel@337	956	v.Add(new Voltage("+12V", 1, 11, 1));
moel@337	957	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337	958	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337	959	v.Add(new Voltage("+5V", 4, 12, 3));
moel@337	960	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337	961	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337	962	t.Add(new Temperature("CPU", 0));
moel@337	963	t.Add(new Temperature("Auxiliary", 2));
moel@337	964	t.Add(new Temperature("Motherboard", 3));
moel@337	965	for (int i = 0; i < superIO.Fans.Length; i++)
moel@337	966	f.Add(new Fan("Fan #" + (i + 1), i));
moel@337	967	for (int i = 0; i < superIO.Controls.Length; i++)
moel@337	968	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337	969	break;
moel@332	970	case Model.P9X79: // NCT6776F
moel@332	971	v.Add(new Voltage("CPU VCore", 0));
moel@332	972	v.Add(new Voltage("+12V", 1, 11, 1));
moel@332	973	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332	974	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332	975	v.Add(new Voltage("+5V", 4, 12, 3));
moel@332	976	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332	977	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332	978	t.Add(new Temperature("CPU", 0));
moel@332	979	t.Add(new Temperature("Motherboard", 3));
moel@332	980	for (int i = 0; i < superIO.Fans.Length; i++)
moel@332	981	f.Add(new Fan("Fan #" + (i + 1), i));
moel@332	982	break;
moel@265	983	default:
moel@265	984	v.Add(new Voltage("CPU VCore", 0));
moel@265	985	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	986	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	987	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	988	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	989	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	990	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	991	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	992	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	993	t.Add(new Temperature("CPU Core", 0));
moel@354	994	t.Add(new Temperature("Temperature #1", 1));
moel@354	995	t.Add(new Temperature("Temperature #2", 2));
moel@354	996	t.Add(new Temperature("Temperature #3", 3));
moel@265	997	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	998	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	999	break;
moel@265	1000	}
moel@265	1001	break;
moel@265	1002	default:
moel@265	1003	v.Add(new Voltage("CPU VCore", 0));
moel@265	1004	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	1005	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	1006	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	1007	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	1008	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	1009	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	1010	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	1011	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	1012	t.Add(new Temperature("CPU Core", 0));
moel@354	1013	t.Add(new Temperature("Temperature #1", 1));
moel@354	1014	t.Add(new Temperature("Temperature #2", 2));
moel@354	1015	t.Add(new Temperature("Temperature #3", 3));
moel@265	1016	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	1017	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	1018	break;
moel@265	1019	}
moel@245	1020	break;
moel@356	1021	case Chip.NCT6779D:
moel@359	1022	switch (manufacturer) {
moel@359	1023	case Manufacturer.ASUS:
moel@359	1024	switch (model) {
moel@359	1025	case Model.P8Z77_V:
moel@359	1026	v.Add(new Voltage("CPU VCore", 0));
moel@359	1027	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1028	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1029	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1030	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1031	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1032	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1033	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1034	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1035	v.Add(new Voltage("VTT", 9));
moel@359	1036	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1037	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1038	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1039	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1040	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1041	t.Add(new Temperature("CPU Core", 0));
moel@359	1042	t.Add(new Temperature("Auxiliary", 1));
moel@359	1043	t.Add(new Temperature("Motherboard", 2));
moel@359	1044	f.Add(new Fan("Chassis Fan #1", 0));
moel@359	1045	f.Add(new Fan("CPU Fan", 1));
moel@359	1046	f.Add(new Fan("Chassis Fan #2", 2));
moel@359	1047	f.Add(new Fan("Chassis Fan #3", 3));
moel@359	1048	c.Add(new Ctrl("Chassis Fan #1", 0));
moel@359	1049	c.Add(new Ctrl("CPU Fan", 1));
moel@359	1050	c.Add(new Ctrl("Chassis Fan #2", 2));
moel@359	1051	c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359	1052	break;
moel@359	1053	}
moel@359	1054	break;
moel@359	1055	default:
moel@359	1056	v.Add(new Voltage("CPU VCore", 0));
moel@359	1057	v.Add(new Voltage("Voltage #2", 1, true));
moel@359	1058	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359	1059	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359	1060	v.Add(new Voltage("Voltage #5", 4, true));
moel@359	1061	v.Add(new Voltage("Voltage #6", 5, true));
moel@359	1062	v.Add(new Voltage("Voltage #7", 6, true));
moel@359	1063	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359	1064	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359	1065	v.Add(new Voltage("VTT", 9));
moel@359	1066	v.Add(new Voltage("Voltage #11", 10, true));
moel@359	1067	v.Add(new Voltage("Voltage #12", 11, true));
moel@359	1068	v.Add(new Voltage("Voltage #13", 12, true));
moel@359	1069	v.Add(new Voltage("Voltage #14", 13, true));
moel@359	1070	v.Add(new Voltage("Voltage #15", 14, true));
moel@359	1071	t.Add(new Temperature("CPU Core", 0));
moel@359	1072	t.Add(new Temperature("Temperature #1", 1));
moel@359	1073	t.Add(new Temperature("Temperature #2", 2));
moel@359	1074	t.Add(new Temperature("Temperature #3", 3));
moel@359	1075	t.Add(new Temperature("Temperature #4", 4));
moel@359	1076	t.Add(new Temperature("Temperature #5", 5));
moel@359	1077	t.Add(new Temperature("Temperature #6", 6));
moel@359	1078	for (int i = 0; i < superIO.Fans.Length; i++)
moel@359	1079	f.Add(new Fan("Fan #" + (i + 1), i));
moel@359	1080	for (int i = 0; i < superIO.Controls.Length; i++)
moel@359	1081	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359	1082	break;
moel@359	1083	}
moel@356	1084	break;
moel@130	1085	default:
moel@130	1086	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	1087	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	1088	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	1089	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	1090	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	1091	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	1092	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	1093	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	1094	break;
moel@130	1095	}
moel@130	1096
moel@195	1097	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	1098	foreach (Voltage voltage in v)
moel@130	1099	if (voltage.Index < superIO.Voltages.Length) {
moel@130	1100	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	1101	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	1102	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	1103	formula, voltage.Ri),
moel@130	1104	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	1105	formula, voltage.Rf),
moel@130	1106	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	1107	formula, voltage.Vf)
moel@165	1108	}, settings);
moel@130	1109	voltages.Add(sensor);
moel@130	1110	}
moel@130	1111
moel@130	1112	foreach (Temperature temperature in t)
moel@130	1113	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	1114	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	1115	SensorType.Temperature, this, new [] {
moel@130	1116	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	1117	}, settings);
moel@130	1118	temperatures.Add(sensor);
moel@130	1119	}
moel@130	1120
moel@130	1121	foreach (Fan fan in f)
moel@130	1122	if (fan.Index < superIO.Fans.Length) {
moel@134	1123	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	1124	this, settings);
moel@130	1125	fans.Add(sensor);
moel@130	1126	}
moel@323	1127
moel@323	1128	foreach (Ctrl ctrl in c) {
moel@323	1129	int index = ctrl.Index;
moel@323	1130	if (index < superIO.Controls.Length) {
moel@323	1131	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323	1132	this, settings);
moel@323	1133	Control control = new Control(sensor, settings, 0, 100);
moel@323	1134	control.ControlModeChanged += (cc) => {
moel@323	1135	if (cc.ControlMode == ControlMode.Default) {
moel@323	1136	superIO.SetControl(index, null);
moel@323	1137	} else {
moel@323	1138	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1139	}
moel@323	1140	};
moel@323	1141	control.SoftwareControlValueChanged += (cc) => {
moel@323	1142	if (cc.ControlMode == ControlMode.Software)
moel@323	1143	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1144	};
moel@323	1145	if (control.ControlMode == ControlMode.Software)
moel@323	1146	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323	1147	sensor.Control = control;
moel@323	1148	controls.Add(sensor);
moel@323	1149	}
moel@323	1150	}
moel@130	1151	}
moel@130	1152
moel@165	1153	public override HardwareType HardwareType {
moel@165	1154	get { return HardwareType.SuperIO; }
moel@130	1155	}
moel@130	1156
moel@176	1157	public override IHardware Parent {
moel@176	1158	get { return mainboard; }
moel@176	1159	}
moel@176	1160
moel@130	1161
moel@130	1162	public override string GetReport() {
moel@130	1163	return superIO.GetReport();
moel@130	1164	}
moel@130	1165
moel@130	1166	public override void Update() {
moel@130	1167	superIO.Update();
moel@130	1168
moel@130	1169	foreach (Sensor sensor in voltages) {
moel@228	1170	float? value = readVoltage(sensor.Index);
moel@130	1171	if (value.HasValue) {
moel@130	1172	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1173	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1174	ActivateSensor(sensor);
moel@130	1175	}
moel@130	1176	}
moel@130	1177
moel@130	1178	foreach (Sensor sensor in temperatures) {
moel@228	1179	float? value = readTemperature(sensor.Index);
moel@130	1180	if (value.HasValue) {
moel@130	1181	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1182	ActivateSensor(sensor);
moel@130	1183	}
moel@130	1184	}
moel@130	1185
moel@130	1186	foreach (Sensor sensor in fans) {
moel@228	1187	float? value = readFan(sensor.Index);
moel@130	1188	if (value.HasValue) {
moel@130	1189	sensor.Value = value;
moel@130	1190	if (value.Value > 0)
moel@130	1191	ActivateSensor(sensor);
moel@130	1192	}
moel@130	1193	}
moel@228	1194
moel@323	1195	foreach (Sensor sensor in controls) {
moel@323	1196	float? value = readControl(sensor.Index);
moel@323	1197	if (value.HasValue) {
moel@323	1198	sensor.Value = value;
moel@323	1199	ActivateSensor(sensor);
moel@323	1200	}
moel@323	1201	}
moel@323	1202
moel@228	1203	postUpdate();
moel@130	1204	}
moel@130	1205
moel@323	1206	public override void Close() {
moel@323	1207	foreach (Sensor sensor in controls) {
moel@323	1208	// restore all controls back to default
moel@323	1209	superIO.SetControl(sensor.Index, null);
moel@323	1210	}
moel@323	1211	base.Close();
moel@323	1212	}
moel@323	1213
moel@130	1214	private class Voltage {
moel@130	1215	public readonly string Name;
moel@130	1216	public readonly int Index;
moel@130	1217	public readonly float Ri;
moel@130	1218	public readonly float Rf;
moel@130	1219	public readonly float Vf;
moel@130	1220	public readonly bool Hidden;
moel@130	1221
moel@202	1222	public Voltage(string name, int index) :
moel@202	1223	this(name, index, false) { }
moel@202	1224
moel@130	1225	public Voltage(string name, int index, bool hidden) :
moel@130	1226	this(name, index, 0, 1, 0, hidden) { }
moel@202	1227
moel@202	1228	public Voltage(string name, int index, float ri, float rf) :
moel@202	1229	this(name, index, ri, rf, 0, false) { }
moel@202	1230
moel@202	1231	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1232
moel@195	1233	public Voltage(string name, int index,
moel@202	1234	float ri, float rf, float vf, bool hidden)
moel@195	1235	{
moel@130	1236	this.Name = name;
moel@130	1237	this.Index = index;
moel@130	1238	this.Ri = ri;
moel@130	1239	this.Rf = rf;
moel@130	1240	this.Vf = vf;
moel@130	1241	this.Hidden = hidden;
moel@130	1242	}
moel@130	1243	}
moel@130	1244
moel@130	1245	private class Temperature {
moel@130	1246	public readonly string Name;
moel@130	1247	public readonly int Index;
moel@130	1248
moel@167	1249	public Temperature(string name, int index) {
moel@130	1250	this.Name = name;
moel@130	1251	this.Index = index;
moel@130	1252	}
moel@130	1253	}
moel@130	1254
moel@130	1255	private class Fan {
moel@130	1256	public readonly string Name;
moel@130	1257	public readonly int Index;
moel@130	1258
moel@130	1259	public Fan(string name, int index) {
moel@130	1260	this.Name = name;
moel@130	1261	this.Index = index;
moel@130	1262	}
moel@130	1263	}
moel@323	1264
moel@323	1265	private class Ctrl {
moel@323	1266	public readonly string Name;
moel@323	1267	public readonly int Index;
moel@323	1268
moel@323	1269	public Ctrl(string name, int index) {
moel@323	1270	this.Name = name;
moel@323	1271	this.Index = index;
moel@323	1272	}
moel@323	1273	}
moel@130	1274	}
moel@130	1275	}

author	moel.mich
	Sun, 08 Jul 2012 19:26:00 +0000
changeset 359	30bb76a1da24
parent 357	fb8dc26f65a4
child 368	1036b453f1f6
permissions	-rw-r--r--