OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@e471b1c2b1a6 (annotated)

moel@135	1	/*
moel@130	2
moel@344	3	This Source Code Form is subject to the terms of the Mozilla Public
moel@344	4	License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344	5	file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130	6
moel@344	7	Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344	8
moel@130	9	*/
moel@130	10
moel@228	11	using System;
moel@130	12	using System.Collections.Generic;
moel@166	13	using System.Globalization;
moel@228	14	using System.Threading;
moel@130	15	using OpenHardwareMonitor.Hardware.LPC;
moel@130	16
moel@130	17	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	18	internal class SuperIOHardware : Hardware {
moel@130	19
moel@195	20	private readonly Mainboard mainboard;
moel@195	21	private readonly ISuperIO superIO;
moel@130	22
moel@195	23	private readonly List<Sensor> voltages = new List<Sensor>();
moel@195	24	private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195	25	private readonly List<Sensor> fans = new List<Sensor>();
moel@323	26	private readonly List<Sensor> controls = new List<Sensor>();
moel@167	27
moel@228	28	private delegate float? ReadValueDelegate(int index);
moel@228	29	private delegate void UpdateDelegate();
moel@228	30
moel@228	31	// delegates for mainboard specific sensor reading code
moel@228	32	private readonly ReadValueDelegate readVoltage;
moel@228	33	private readonly ReadValueDelegate readTemperature;
moel@228	34	private readonly ReadValueDelegate readFan;
moel@323	35	private readonly ReadValueDelegate readControl;
moel@228	36
moel@228	37	// delegate for post update mainboard specific code
moel@228	38	private readonly UpdateDelegate postUpdate;
moel@228	39
moel@228	40	// mainboard specific mutex
moel@228	41	private readonly Mutex mutex;
moel@228	42
moel@176	43	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	44	Manufacturer manufacturer, Model model, ISettings settings)
moel@275	45	: base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275	46	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275	47	settings)
moel@130	48	{
moel@176	49	this.mainboard = mainboard;
moel@130	50	this.superIO = superIO;
moel@130	51
moel@228	52	this.readVoltage = (index) => superIO.Voltages[index];
moel@228	53	this.readTemperature = (index) => superIO.Temperatures[index];
moel@228	54	this.readFan = (index) => superIO.Fans[index];
moel@323	55	this.readControl = (index) => superIO.Controls[index];
moel@228	56
moel@228	57	this.postUpdate = () => { };
moel@228	58
moel@130	59	List<Voltage> v = new List<Voltage>();
moel@130	60	List<Temperature> t = new List<Temperature>();
moel@130	61	List<Fan> f = new List<Fan>();
moel@323	62	List<Ctrl> c = new List<Ctrl>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@353	65	case Chip.IT8705F:
moel@130	66	case Chip.IT8712F:
moel@130	67	case Chip.IT8716F:
moel@130	68	case Chip.IT8718F:
moel@177	69	case Chip.IT8720F:
moel@319	70	case Chip.IT8726F:
moel@130	71	switch (manufacturer) {
moel@133	72	case Manufacturer.ASUS:
moel@133	73	switch (model) {
moel@168	74	case Model.Crosshair_III_Formula: // IT8720F
moel@133	75	v.Add(new Voltage("VBat", 8));
moel@133	76	t.Add(new Temperature("CPU", 0));
moel@133	77	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	78	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	79	break;
moel@144	80	case Model.M2N_SLI_DELUXE:
moel@133	81	v.Add(new Voltage("CPU VCore", 0));
moel@133	82	v.Add(new Voltage("+3.3V", 1));
moel@195	83	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	84	v.Add(new Voltage("+12V", 4, 30, 10));
moel@195	85	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133	86	v.Add(new Voltage("VBat", 8));
moel@133	87	t.Add(new Temperature("CPU", 0));
moel@133	88	t.Add(new Temperature("Motherboard", 1));
moel@133	89	f.Add(new Fan("CPU Fan", 0));
moel@133	90	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	91	f.Add(new Fan("Power Fan", 2));
moel@133	92	break;
moel@168	93	case Model.M4A79XTD_EVO: // IT8720F
moel@195	94	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144	95	v.Add(new Voltage("VBat", 8));
moel@144	96	t.Add(new Temperature("CPU", 0));
moel@144	97	t.Add(new Temperature("Motherboard", 1));
moel@144	98	f.Add(new Fan("CPU Fan", 0));
moel@144	99	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	100	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	101	break;
moel@133	102	default:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	105	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	106	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	107	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	108	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	109	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	110	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	111	v.Add(new Voltage("VBat", 8));
moel@133	112	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	113	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	114	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	115	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	116	break;
moel@133	117	}
moel@133	118	break;
moel@221	119
moel@221	120	case Manufacturer.ASRock:
moel@221	121	switch (model) {
moel@221	122	case Model.P55_Deluxe: // IT8720F
moel@228	123
moel@221	124	v.Add(new Voltage("CPU VCore", 0));
moel@221	125	v.Add(new Voltage("+3.3V", 2));
moel@221	126	v.Add(new Voltage("+12V", 4, 30, 10));
moel@221	127	v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221	128	v.Add(new Voltage("VBat", 8));
moel@221	129	t.Add(new Temperature("CPU", 0));
moel@221	130	t.Add(new Temperature("Motherboard", 1));
moel@221	131	f.Add(new Fan("CPU Fan", 0));
moel@221	132	f.Add(new Fan("Chassis Fan #1", 1));
moel@228	133
moel@228	134	// this mutex is also used by the official ASRock tool
moel@228	135	mutex = new Mutex(false, "ASRockOCMark");
moel@228	136
moel@228	137	bool exclusiveAccess = false;
moel@228	138	try {
moel@228	139	exclusiveAccess = mutex.WaitOne(10, false);
moel@228	140	} catch (AbandonedMutexException) { }
moel@228	141	catch (InvalidOperationException) { }
moel@228	142
moel@228	143	// only read additional fans if we get exclusive access
moel@228	144	if (exclusiveAccess) {
moel@228	145
moel@228	146	f.Add(new Fan("Chassis Fan #2", 2));
moel@228	147	f.Add(new Fan("Chassis Fan #3", 3));
moel@228	148	f.Add(new Fan("Power Fan", 4));
moel@228	149
moel@228	150	readFan = (index) => {
moel@228	151	if (index < 2) {
moel@228	152	return superIO.Fans[index];
moel@228	153	} else {
moel@228	154	// get GPIO 80-87
moel@228	155	byte? gpio = superIO.ReadGPIO(7);
moel@228	156	if (!gpio.HasValue)
moel@228	157	return null;
moel@228	158
moel@228	159	// read the last 3 fans based on GPIO 83-85
moel@228	160	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	161	return (((gpio.Value >> 3) & 0x07) ==
moel@228	162	masks[index - 2]) ? superIO.Fans[2] : null;
moel@228	163	}
moel@228	164	};
moel@228	165
moel@228	166	int fanIndex = 0;
moel@228	167	postUpdate = () => {
moel@228	168	// get GPIO 80-87
moel@228	169	byte? gpio = superIO.ReadGPIO(7);
moel@228	170	if (!gpio.HasValue)
moel@228	171	return;
moel@228	172
moel@228	173	// prepare the GPIO 83-85 for the next update
moel@228	174	int[] masks = { 0x05, 0x03, 0x06 };
moel@228	175	superIO.WriteGPIO(7,
moel@228	176	(byte)((gpio.Value & 0xC7) \| (masks[fanIndex] << 3)));
moel@228	177	fanIndex = (fanIndex + 1) % 3;
moel@228	178	};
moel@228	179	}
moel@228	180
moel@221	181	break;
moel@221	182	default:
moel@221	183	v.Add(new Voltage("CPU VCore", 0));
moel@221	184	v.Add(new Voltage("Voltage #2", 1, true));
moel@221	185	v.Add(new Voltage("Voltage #3", 2, true));
moel@221	186	v.Add(new Voltage("Voltage #4", 3, true));
moel@221	187	v.Add(new Voltage("Voltage #5", 4, true));
moel@221	188	v.Add(new Voltage("Voltage #6", 5, true));
moel@221	189	v.Add(new Voltage("Voltage #7", 6, true));
moel@221	190	v.Add(new Voltage("Voltage #8", 7, true));
moel@221	191	v.Add(new Voltage("VBat", 8));
moel@221	192	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221	193	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221	194	for (int i = 0; i < superIO.Fans.Length; i++)
moel@221	195	f.Add(new Fan("Fan #" + (i + 1), i));
moel@221	196	break;
moel@221	197	};
moel@221	198	break;
moel@221	199
moel@130	200	case Manufacturer.DFI:
moel@130	201	switch (model) {
moel@168	202	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	203	v.Add(new Voltage("CPU VCore", 0));
moel@130	204	v.Add(new Voltage("FSB VTT", 1));
moel@130	205	v.Add(new Voltage("+3.3V", 2));
moel@195	206	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	207	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	208	v.Add(new Voltage("NB Core", 5));
moel@130	209	v.Add(new Voltage("VDIMM", 6));
moel@195	210	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	211	v.Add(new Voltage("VBat", 8));
moel@130	212	t.Add(new Temperature("CPU", 0));
moel@130	213	t.Add(new Temperature("System", 1));
moel@130	214	t.Add(new Temperature("Chipset", 2));
moel@130	215	f.Add(new Fan("Fan #1", 0));
moel@130	216	f.Add(new Fan("Fan #2", 1));
moel@130	217	f.Add(new Fan("Fan #3", 2));
moel@130	218	break;
moel@168	219	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	220	v.Add(new Voltage("CPU VCore", 0));
moel@130	221	v.Add(new Voltage("VTT", 1));
moel@130	222	v.Add(new Voltage("+3.3V", 2));
moel@195	223	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	224	v.Add(new Voltage("+12V", 4, 30, 10));
moel@130	225	v.Add(new Voltage("CPU PLL", 5));
moel@130	226	v.Add(new Voltage("DRAM", 6));
moel@195	227	v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130	228	v.Add(new Voltage("VBat", 8));
moel@130	229	t.Add(new Temperature("Chipset", 0));
moel@130	230	t.Add(new Temperature("CPU PWM", 1));
moel@130	231	t.Add(new Temperature("CPU", 2));
moel@130	232	f.Add(new Fan("Fan #1", 0));
moel@130	233	f.Add(new Fan("Fan #2", 1));
moel@130	234	f.Add(new Fan("Fan #3", 2));
moel@130	235	break;
moel@130	236	default:
moel@130	237	v.Add(new Voltage("CPU VCore", 0));
moel@130	238	v.Add(new Voltage("VTT", 1, true));
moel@130	239	v.Add(new Voltage("+3.3V", 2, true));
moel@130	240	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	241	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	242	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	243	v.Add(new Voltage("DRAM", 6, true));
moel@130	244	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	245	v.Add(new Voltage("VBat", 8));
moel@130	246	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	247	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	248	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	249	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	250	break;
moel@130	251	}
moel@130	252	break;
moel@130	253
moel@130	254	case Manufacturer.Gigabyte:
moel@130	255	switch (model) {
moel@168	256	case Model._965P_S3: // IT8718F
moel@130	257	v.Add(new Voltage("CPU VCore", 0));
moel@130	258	v.Add(new Voltage("DRAM", 1));
moel@130	259	v.Add(new Voltage("+3.3V", 2));
moel@195	260	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	261	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	262	v.Add(new Voltage("VBat", 8));
moel@130	263	t.Add(new Temperature("System", 0));
moel@130	264	t.Add(new Temperature("CPU", 1));
moel@130	265	f.Add(new Fan("CPU Fan", 0));
moel@130	266	f.Add(new Fan("System Fan", 1));
moel@130	267	break;
moel@168	268	case Model.EP45_DS3R: // IT8718F
moel@130	269	case Model.EP45_UD3R:
moel@138	270	case Model.X38_DS5:
moel@130	271	v.Add(new Voltage("CPU VCore", 0));
moel@130	272	v.Add(new Voltage("DRAM", 1));
moel@130	273	v.Add(new Voltage("+3.3V", 2));
moel@195	274	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	275	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	276	v.Add(new Voltage("VBat", 8));
moel@130	277	t.Add(new Temperature("System", 0));
moel@130	278	t.Add(new Temperature("CPU", 1));
moel@130	279	f.Add(new Fan("CPU Fan", 0));
moel@130	280	f.Add(new Fan("System Fan #2", 1));
moel@130	281	f.Add(new Fan("Power Fan", 2));
moel@130	282	f.Add(new Fan("System Fan #1", 3));
moel@130	283	break;
moel@168	284	case Model.EX58_EXTREME: // IT8720F
moel@133	285	v.Add(new Voltage("CPU VCore", 0));
moel@133	286	v.Add(new Voltage("DRAM", 1));
moel@195	287	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133	288	v.Add(new Voltage("VBat", 8));
moel@133	289	t.Add(new Temperature("System", 0));
moel@133	290	t.Add(new Temperature("CPU", 1));
moel@138	291	t.Add(new Temperature("Northbridge", 2));
moel@133	292	f.Add(new Fan("CPU Fan", 0));
moel@133	293	f.Add(new Fan("System Fan #2", 1));
moel@133	294	f.Add(new Fan("Power Fan", 2));
moel@133	295	f.Add(new Fan("System Fan #1", 3));
moel@133	296	break;
moel@168	297	case Model.P35_DS3: // IT8718F
moel@168	298	case Model.P35_DS3L: // IT8718F
moel@130	299	v.Add(new Voltage("CPU VCore", 0));
moel@130	300	v.Add(new Voltage("DRAM", 1));
moel@130	301	v.Add(new Voltage("+3.3V", 2));
moel@195	302	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	303	v.Add(new Voltage("+12V", 7, 27, 9.1f));
moel@130	304	v.Add(new Voltage("VBat", 8));
moel@130	305	t.Add(new Temperature("System", 0));
moel@130	306	t.Add(new Temperature("CPU", 1));
moel@130	307	f.Add(new Fan("CPU Fan", 0));
moel@130	308	f.Add(new Fan("System Fan #1", 1));
moel@130	309	f.Add(new Fan("System Fan #2", 2));
moel@130	310	f.Add(new Fan("Power Fan", 3));
moel@130	311	break;
moel@168	312	case Model.P55_UD4: // IT8720F
moel@168	313	case Model.P55M_UD4: // IT8720F
moel@148	314	v.Add(new Voltage("CPU VCore", 0));
moel@148	315	v.Add(new Voltage("DRAM", 1));
moel@148	316	v.Add(new Voltage("+3.3V", 2));
moel@195	317	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	318	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@148	319	v.Add(new Voltage("VBat", 8));
moel@148	320	t.Add(new Temperature("System", 0));
moel@148	321	t.Add(new Temperature("CPU", 2));
moel@148	322	f.Add(new Fan("CPU Fan", 0));
moel@148	323	f.Add(new Fan("System Fan #2", 1));
moel@148	324	f.Add(new Fan("Power Fan", 2));
moel@148	325	f.Add(new Fan("System Fan #1", 3));
moel@148	326	break;
moel@168	327	case Model.GA_MA770T_UD3: // IT8720F
moel@154	328	v.Add(new Voltage("CPU VCore", 0));
moel@154	329	v.Add(new Voltage("DRAM", 1));
moel@154	330	v.Add(new Voltage("+3.3V", 2));
moel@195	331	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	332	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@154	333	v.Add(new Voltage("VBat", 8));
moel@154	334	t.Add(new Temperature("System", 0));
moel@154	335	t.Add(new Temperature("CPU", 1));
moel@154	336	f.Add(new Fan("CPU Fan", 0));
moel@154	337	f.Add(new Fan("System Fan #1", 1));
moel@154	338	f.Add(new Fan("System Fan #2", 2));
moel@154	339	f.Add(new Fan("Power Fan", 3));
moel@154	340	break;
moel@168	341	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	342	v.Add(new Voltage("CPU VCore", 0));
moel@130	343	v.Add(new Voltage("DRAM", 1));
moel@130	344	v.Add(new Voltage("+3.3V", 2));
moel@195	345	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	346	v.Add(new Voltage("+12V", 4, 27, 9.1f));
moel@130	347	v.Add(new Voltage("VBat", 8));
moel@130	348	t.Add(new Temperature("System", 0));
moel@130	349	t.Add(new Temperature("CPU", 1));
moel@130	350	f.Add(new Fan("CPU Fan", 0));
moel@130	351	f.Add(new Fan("System Fan", 1));
moel@130	352	f.Add(new Fan("NB Fan", 2));
moel@130	353	break;
moel@168	354	case Model.X58A_UD3R: // IT8720F
moel@138	355	v.Add(new Voltage("CPU VCore", 0));
moel@138	356	v.Add(new Voltage("DRAM", 1));
moel@138	357	v.Add(new Voltage("+3.3V", 2));
moel@195	358	v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195	359	v.Add(new Voltage("+12V", 5, 27, 9.1f));
moel@138	360	v.Add(new Voltage("VBat", 8));
moel@138	361	t.Add(new Temperature("System", 0));
moel@138	362	t.Add(new Temperature("CPU", 1));
moel@138	363	t.Add(new Temperature("Northbridge", 2));
moel@138	364	f.Add(new Fan("CPU Fan", 0));
moel@138	365	f.Add(new Fan("System Fan #2", 1));
moel@138	366	f.Add(new Fan("Power Fan", 2));
moel@138	367	f.Add(new Fan("System Fan #1", 3));
moel@138	368	break;
moel@130	369	default:
moel@130	370	v.Add(new Voltage("CPU VCore", 0));
moel@130	371	v.Add(new Voltage("DRAM", 1, true));
moel@130	372	v.Add(new Voltage("+3.3V", 2, true));
moel@130	373	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	374	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	375	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	376	v.Add(new Voltage("Voltage #7", 6, true));
moel@257	377	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	378	v.Add(new Voltage("VBat", 8));
moel@130	379	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	380	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	381	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	382	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	383	break;
moel@130	384	}
moel@130	385	break;
moel@130	386
moel@130	387	default:
moel@130	388	v.Add(new Voltage("CPU VCore", 0));
moel@130	389	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	390	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	391	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	392	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	393	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	394	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	395	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	396	v.Add(new Voltage("VBat", 8));
moel@130	397	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	398	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	399	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	400	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	401	break;
moel@130	402	}
moel@130	403	break;
moel@170	404
moel@170	405	case Chip.IT8721F:
moel@277	406	case Chip.IT8728F:
moel@341	407	case Chip.IT8771E:
moel@319	408	case Chip.IT8772E:
moel@177	409	switch (manufacturer) {
moel@177	410	case Manufacturer.ECS:
moel@177	411	switch (model) {
moel@177	412	case Model.A890GXM_A: // IT8721F
moel@177	413	v.Add(new Voltage("CPU VCore", 0));
moel@177	414	v.Add(new Voltage("VDIMM", 1));
moel@177	415	v.Add(new Voltage("NB Voltage", 2));
moel@195	416	v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177	417	// v.Add(new Voltage("VDIMM", 6, true));
moel@195	418	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195	419	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	420	t.Add(new Temperature("CPU", 0));
moel@177	421	t.Add(new Temperature("System", 1));
moel@177	422	t.Add(new Temperature("Northbridge", 2));
moel@177	423	f.Add(new Fan("CPU Fan", 0));
moel@177	424	f.Add(new Fan("System Fan", 1));
moel@177	425	f.Add(new Fan("Power Fan", 2));
moel@177	426	break;
moel@177	427	default:
moel@177	428	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	429	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	430	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	431	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	432	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	433	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	434	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	435	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	436	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	437	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	438	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	439	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	440	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	441	break;
moel@177	442	}
moel@177	443	break;
moel@278	444	case Manufacturer.Gigabyte:
moel@278	445	switch (model) {
moel@290	446	case Model.P67A_UD4_B3: // IT8728F
moel@278	447	v.Add(new Voltage("+12V", 0, 100, 10));
moel@278	448	v.Add(new Voltage("+5V", 1, 15, 10));
moel@278	449	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	450	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	451	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	452	v.Add(new Voltage("CPU VCore", 5));
moel@278	453	v.Add(new Voltage("DRAM", 6));
moel@278	454	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278	455	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	456	t.Add(new Temperature("System", 0));
moel@278	457	t.Add(new Temperature("CPU", 2));
moel@278	458	f.Add(new Fan("CPU Fan", 0));
moel@278	459	f.Add(new Fan("System Fan #2", 1));
moel@278	460	f.Add(new Fan("Power Fan", 2));
moel@278	461	f.Add(new Fan("System Fan #1", 3));
moel@278	462	break;
moel@290	463	case Model.H67A_UD3H_B3: // IT8728F
moel@290	464	v.Add(new Voltage("VTT", 0));
moel@290	465	v.Add(new Voltage("+5V", 1, 15, 10));
moel@290	466	v.Add(new Voltage("+12V", 2, 68, 22));
moel@290	467	v.Add(new Voltage("Voltage #4", 3, true));
moel@290	468	v.Add(new Voltage("Voltage #5", 4, true));
moel@290	469	v.Add(new Voltage("CPU VCore", 5));
moel@290	470	v.Add(new Voltage("DRAM", 6));
moel@290	471	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290	472	v.Add(new Voltage("VBat", 8, 10, 10));
moel@290	473	t.Add(new Temperature("System", 0));
moel@290	474	t.Add(new Temperature("CPU", 2));
moel@290	475	f.Add(new Fan("CPU Fan", 0));
moel@290	476	f.Add(new Fan("System Fan #1", 1));
moel@290	477	f.Add(new Fan("Power Fan", 2));
moel@290	478	f.Add(new Fan("System Fan #2", 3));
moel@290	479	break;
moel@305	480	case Model.Z68X_UD7_B3: // IT8728F
moel@305	481	v.Add(new Voltage("VTT", 0));
moel@307	482	v.Add(new Voltage("+3.3V", 1, 13.3f, 20.5f));
moel@305	483	v.Add(new Voltage("+12V", 2, 68, 22));
moel@307	484	v.Add(new Voltage("+5V", 3, 14.3f, 20));
moel@305	485	v.Add(new Voltage("CPU VCore", 5));
moel@305	486	v.Add(new Voltage("DRAM", 6));
moel@305	487	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305	488	v.Add(new Voltage("VBat", 8, 10, 10));
moel@305	489	t.Add(new Temperature("System", 0));
moel@305	490	t.Add(new Temperature("CPU", 1));
moel@305	491	t.Add(new Temperature("System 3", 2));
moel@305	492	f.Add(new Fan("CPU Fan", 0));
moel@305	493	f.Add(new Fan("Power Fan", 1));
moel@305	494	f.Add(new Fan("System Fan #1", 2));
moel@305	495	f.Add(new Fan("System Fan #2", 3));
moel@305	496	f.Add(new Fan("System Fan #3", 4));
moel@305	497	break;
moel@278	498	default:
moel@278	499	v.Add(new Voltage("Voltage #1", 0, true));
moel@278	500	v.Add(new Voltage("Voltage #2", 1, true));
moel@278	501	v.Add(new Voltage("Voltage #3", 2, true));
moel@278	502	v.Add(new Voltage("Voltage #4", 3, true));
moel@278	503	v.Add(new Voltage("Voltage #5", 4, true));
moel@278	504	v.Add(new Voltage("Voltage #6", 5, true));
moel@278	505	v.Add(new Voltage("Voltage #7", 6, true));
moel@278	506	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278	507	v.Add(new Voltage("VBat", 8, 10, 10));
moel@278	508	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278	509	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278	510	for (int i = 0; i < superIO.Fans.Length; i++)
moel@278	511	f.Add(new Fan("Fan #" + (i + 1), i));
moel@278	512	break;
moel@278	513	}
moel@278	514	break;
moel@320	515	case Manufacturer.Shuttle:
moel@320	516	switch (model) {
moel@320	517	case Model.FH67: // IT8772E
moel@320	518	v.Add(new Voltage("CPU VCore", 0));
moel@320	519	v.Add(new Voltage("DRAM", 1));
moel@320	520	v.Add(new Voltage("PCH VCCIO", 2));
moel@320	521	v.Add(new Voltage("CPU VCCIO", 3));
moel@320	522	v.Add(new Voltage("Graphic Voltage", 4));
moel@320	523	v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320	524	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	525	t.Add(new Temperature("System", 0));
moel@320	526	t.Add(new Temperature("CPU", 1));
moel@320	527	f.Add(new Fan("Fan #1", 0));
moel@320	528	f.Add(new Fan("CPU Fan", 1));
moel@320	529	break;
moel@320	530	default:
moel@320	531	v.Add(new Voltage("Voltage #1", 0, true));
moel@320	532	v.Add(new Voltage("Voltage #2", 1, true));
moel@320	533	v.Add(new Voltage("Voltage #3", 2, true));
moel@320	534	v.Add(new Voltage("Voltage #4", 3, true));
moel@320	535	v.Add(new Voltage("Voltage #5", 4, true));
moel@320	536	v.Add(new Voltage("Voltage #6", 5, true));
moel@320	537	v.Add(new Voltage("Voltage #7", 6, true));
moel@320	538	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320	539	v.Add(new Voltage("VBat", 8, 10, 10));
moel@320	540	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320	541	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320	542	for (int i = 0; i < superIO.Fans.Length; i++)
moel@320	543	f.Add(new Fan("Fan #" + (i + 1), i));
moel@320	544	break;
moel@320	545	}
moel@320	546	break;
moel@177	547	default:
moel@177	548	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	549	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	550	v.Add(new Voltage("Voltage #3", 2, true));
moel@277	551	v.Add(new Voltage("Voltage #4", 3, true));
moel@177	552	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	553	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	554	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	555	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195	556	v.Add(new Voltage("VBat", 8, 10, 10));
moel@177	557	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	558	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	559	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	560	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	561	break;
moel@177	562	}
moel@170	563	break;
moel@130	564
moel@130	565	case Chip.F71858:
moel@195	566	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	567	v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195	568	v.Add(new Voltage("Battery", 2, 150, 150));
moel@130	569	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	570	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	571	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	572	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	573	break;
moel@130	574	case Chip.F71862:
moel@130	575	case Chip.F71869:
moel@130	576	case Chip.F71882:
moel@296	577	case Chip.F71889AD:
moel@130	578	case Chip.F71889ED:
moel@130	579	case Chip.F71889F:
moel@352	580	case Chip.F71808E:
moel@132	581	switch (manufacturer) {
moel@132	582	case Manufacturer.EVGA:
moel@132	583	switch (model) {
moel@168	584	case Model.X58_SLI_Classified: // F71882
moel@195	585	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195	586	v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195	587	v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195	588	v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195	589	v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195	590	v.Add(new Voltage("+5V", 5, 51, 12));
moel@195	591	v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195	592	v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195	593	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	594	t.Add(new Temperature("CPU", 0));
moel@132	595	t.Add(new Temperature("VREG", 1));
moel@132	596	t.Add(new Temperature("System", 2));
moel@132	597	f.Add(new Fan("CPU Fan", 0));
moel@132	598	f.Add(new Fan("Power Fan", 1));
moel@132	599	f.Add(new Fan("Chassis Fan", 2));
moel@132	600	break;
moel@132	601	default:
moel@195	602	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	603	v.Add(new Voltage("CPU VCore", 1));
moel@132	604	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	605	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	606	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	607	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	608	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	609	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	610	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	611	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	612	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	613	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	614	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	615	break;
moel@132	616	}
moel@132	617	break;
moel@132	618	default:
moel@195	619	v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132	620	v.Add(new Voltage("CPU VCore", 1));
moel@132	621	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	622	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	623	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	624	v.Add(new Voltage("Voltage #6", 5, true));
moel@352	625	if (superIO.Chip != Chip.F71808E)
moel@352	626	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	627	v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195	628	v.Add(new Voltage("VBat", 8, 150, 150));
moel@132	629	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	630	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	631	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	632	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	633	break;
moel@132	634	}
moel@130	635	break;
moel@130	636
moel@220	637	case Chip.W83627EHF:
moel@220	638	switch (manufacturer) {
moel@220	639	case Manufacturer.ASRock:
moel@220	640	switch (model) {
moel@220	641	case Model.AOD790GX_128M: // W83627EHF
moel@220	642	v.Add(new Voltage("CPU VCore", 0));
moel@220	643	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220	644	v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220	645	v.Add(new Voltage("+5V", 5, 20, 10));
moel@220	646	v.Add(new Voltage("+12V", 6, 28, 5));
moel@220	647	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220	648	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	649	t.Add(new Temperature("CPU", 0));
moel@220	650	t.Add(new Temperature("Motherboard", 2));
moel@221	651	f.Add(new Fan("CPU Fan", 0));
moel@221	652	f.Add(new Fan("Chassis Fan", 1));
moel@220	653	break;
moel@220	654	default:
moel@220	655	v.Add(new Voltage("CPU VCore", 0));
moel@220	656	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	657	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	658	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	659	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	660	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	661	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	662	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	663	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	664	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	665	t.Add(new Temperature("CPU", 0));
moel@220	666	t.Add(new Temperature("Auxiliary", 1));
moel@220	667	t.Add(new Temperature("System", 2));
moel@220	668	f.Add(new Fan("System Fan", 0));
moel@220	669	f.Add(new Fan("CPU Fan", 1));
moel@220	670	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	671	f.Add(new Fan("CPU Fan #2", 3));
moel@220	672	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	673	break;
moel@220	674	} break;
moel@220	675	default:
moel@220	676	v.Add(new Voltage("CPU VCore", 0));
moel@220	677	v.Add(new Voltage("Voltage #2", 1, true));
moel@220	678	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220	679	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220	680	v.Add(new Voltage("Voltage #5", 4, true));
moel@220	681	v.Add(new Voltage("Voltage #6", 5, true));
moel@220	682	v.Add(new Voltage("Voltage #7", 6, true));
moel@220	683	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220	684	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220	685	v.Add(new Voltage("Voltage #10", 9, true));
moel@220	686	t.Add(new Temperature("CPU", 0));
moel@220	687	t.Add(new Temperature("Auxiliary", 1));
moel@220	688	t.Add(new Temperature("System", 2));
moel@220	689	f.Add(new Fan("System Fan", 0));
moel@220	690	f.Add(new Fan("CPU Fan", 1));
moel@220	691	f.Add(new Fan("Auxiliary Fan", 2));
moel@220	692	f.Add(new Fan("CPU Fan #2", 3));
moel@220	693	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220	694	break;
moel@220	695	}
moel@130	696	break;
moel@130	697	case Chip.W83627DHG:
moel@130	698	case Chip.W83627DHGP:
moel@130	699	case Chip.W83667HG:
moel@130	700	case Chip.W83667HGB:
moel@152	701	switch (manufacturer) {
moel@153	702	case Manufacturer.ASRock:
moel@153	703	switch (model) {
moel@168	704	case Model._880GMH_USB3: // W83627DHG-P
moel@153	705	v.Add(new Voltage("CPU VCore", 0));
moel@195	706	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	707	v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195	708	v.Add(new Voltage("+12V", 6, 56, 10));
moel@195	709	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	710	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	711	t.Add(new Temperature("CPU", 0));
moel@153	712	t.Add(new Temperature("Motherboard", 2));
moel@153	713	f.Add(new Fan("Chassis Fan", 0));
moel@153	714	f.Add(new Fan("CPU Fan", 1));
moel@153	715	f.Add(new Fan("Power Fan", 2));
moel@153	716	break;
moel@153	717	default:
moel@153	718	v.Add(new Voltage("CPU VCore", 0));
moel@153	719	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	720	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	721	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153	722	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	723	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	724	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	725	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	726	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153	727	t.Add(new Temperature("CPU", 0));
moel@153	728	t.Add(new Temperature("Auxiliary", 1));
moel@153	729	t.Add(new Temperature("System", 2));
moel@153	730	f.Add(new Fan("System Fan", 0));
moel@153	731	f.Add(new Fan("CPU Fan", 1));
moel@153	732	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	733	f.Add(new Fan("CPU Fan #2", 3));
moel@153	734	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	735	break;
moel@153	736	}
moel@153	737	break;
moel@152	738	case Manufacturer.ASUS:
moel@152	739	switch (model) {
moel@336	740	case Model.P6T: // W83667HG
moel@174	741	case Model.P6X58D_E: // W83667HG
moel@174	742	case Model.Rampage_II_GENE: // W83667HG
moel@152	743	v.Add(new Voltage("CPU VCore", 0));
moel@195	744	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195	745	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	746	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	747	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	748	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	749	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174	750	t.Add(new Temperature("CPU", 0));
moel@174	751	t.Add(new Temperature("Motherboard", 2));
moel@174	752	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	753	f.Add(new Fan("CPU Fan", 1));
moel@174	754	f.Add(new Fan("Power Fan", 2));
moel@174	755	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	756	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	757	break;
moel@174	758	case Model.Rampage_Extreme: // W83667HG
moel@174	759	v.Add(new Voltage("CPU VCore", 0));
moel@195	760	v.Add(new Voltage("+12V", 1, 12, 2));
moel@195	761	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195	762	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195	763	v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195	764	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195	765	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	766	t.Add(new Temperature("CPU", 0));
moel@152	767	t.Add(new Temperature("Motherboard", 2));
moel@152	768	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	769	f.Add(new Fan("CPU Fan", 1));
moel@153	770	f.Add(new Fan("Power Fan", 2));
moel@152	771	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	772	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	773	break;
moel@152	774	default:
moel@152	775	v.Add(new Voltage("CPU VCore", 0));
moel@152	776	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	777	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	778	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	779	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	780	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	781	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	782	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	783	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	784	t.Add(new Temperature("CPU", 0));
moel@152	785	t.Add(new Temperature("Auxiliary", 1));
moel@152	786	t.Add(new Temperature("System", 2));
moel@153	787	f.Add(new Fan("System Fan", 0));
moel@153	788	f.Add(new Fan("CPU Fan", 1));
moel@153	789	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	790	f.Add(new Fan("CPU Fan #2", 3));
moel@153	791	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	792	break;
moel@152	793	}
moel@152	794	break;
moel@152	795	default:
moel@152	796	v.Add(new Voltage("CPU VCore", 0));
moel@152	797	v.Add(new Voltage("Voltage #2", 1, true));
moel@195	798	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195	799	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152	800	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	801	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	802	v.Add(new Voltage("Voltage #7", 6, true));
moel@195	803	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195	804	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152	805	t.Add(new Temperature("CPU", 0));
moel@152	806	t.Add(new Temperature("Auxiliary", 1));
moel@152	807	t.Add(new Temperature("System", 2));
moel@153	808	f.Add(new Fan("System Fan", 0));
moel@153	809	f.Add(new Fan("CPU Fan", 1));
moel@153	810	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	811	f.Add(new Fan("CPU Fan #2", 3));
moel@153	812	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	813	break;
moel@152	814	}
moel@130	815	break;
moel@130	816	case Chip.W83627HF:
moel@130	817	case Chip.W83627THF:
moel@130	818	case Chip.W83687THF:
moel@130	819	v.Add(new Voltage("CPU VCore", 0));
moel@130	820	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	821	v.Add(new Voltage("Voltage #3", 2, true));
moel@195	822	v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130	823	v.Add(new Voltage("Voltage #5", 4, true));
moel@195	824	v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130	825	v.Add(new Voltage("VBAT", 6));
moel@130	826	t.Add(new Temperature("CPU", 0));
moel@130	827	t.Add(new Temperature("Auxiliary", 1));
moel@130	828	t.Add(new Temperature("System", 2));
moel@153	829	f.Add(new Fan("System Fan", 0));
moel@153	830	f.Add(new Fan("CPU Fan", 1));
moel@153	831	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	832	break;
moel@245	833	case Chip.NCT6771F:
moel@265	834	case Chip.NCT6776F:
moel@265	835	switch (manufacturer) {
moel@265	836	case Manufacturer.ASUS:
moel@265	837	switch (model) {
moel@312	838	case Model.P8P67: // NCT6776F
moel@311	839	case Model.P8P67_EVO: // NCT6776F
moel@265	840	case Model.P8P67_PRO: // NCT6776F
moel@265	841	v.Add(new Voltage("CPU VCore", 0));
moel@310	842	v.Add(new Voltage("+12V", 1, 11, 1));
moel@310	843	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	844	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310	845	v.Add(new Voltage("+5V", 4, 12, 3));
moel@310	846	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265	847	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310	848	t.Add(new Temperature("CPU", 0));
moel@276	849	t.Add(new Temperature("Auxiliary", 2));
moel@310	850	t.Add(new Temperature("Motherboard", 3));
moel@310	851	f.Add(new Fan("Chassis Fan #1", 0));
moel@265	852	f.Add(new Fan("CPU Fan", 1));
moel@310	853	f.Add(new Fan("Power Fan", 2));
moel@310	854	f.Add(new Fan("Chassis Fan #2", 3));
moel@323	855	c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323	856	c.Add(new Ctrl("CPU Fan", 1));
moel@323	857	c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265	858	break;
moel@276	859	case Model.P8P67_M_PRO: // NCT6776F
moel@276	860	v.Add(new Voltage("CPU VCore", 0));
moel@276	861	v.Add(new Voltage("+12V", 1, 11, 1));
moel@276	862	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310	863	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276	864	v.Add(new Voltage("+5V", 4, 12, 3));
moel@276	865	v.Add(new Voltage("Voltage #6", 5, true));
moel@276	866	v.Add(new Voltage("Voltage #7", 6, true));
moel@276	867	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276	868	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276	869	t.Add(new Temperature("CPU", 0));
moel@276	870	t.Add(new Temperature("Motherboard", 3));
moel@276	871	f.Add(new Fan("Chassis Fan #1", 0));
moel@276	872	f.Add(new Fan("CPU Fan", 1));
moel@276	873	f.Add(new Fan("Chassis Fan #2", 2));
moel@276	874	f.Add(new Fan("Power Fan", 3));
moel@276	875	f.Add(new Fan("Auxiliary Fan", 4));
moel@276	876	break;
moel@337	877	case Model.P8Z68_V_PRO: // NCT6776F
moel@337	878	v.Add(new Voltage("CPU VCore", 0));
moel@337	879	v.Add(new Voltage("+12V", 1, 11, 1));
moel@337	880	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337	881	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337	882	v.Add(new Voltage("+5V", 4, 12, 3));
moel@337	883	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337	884	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337	885	t.Add(new Temperature("CPU", 0));
moel@337	886	t.Add(new Temperature("Auxiliary", 2));
moel@337	887	t.Add(new Temperature("Motherboard", 3));
moel@337	888	for (int i = 0; i < superIO.Fans.Length; i++)
moel@337	889	f.Add(new Fan("Fan #" + (i + 1), i));
moel@337	890	for (int i = 0; i < superIO.Controls.Length; i++)
moel@337	891	c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337	892	break;
moel@332	893	case Model.P9X79: // NCT6776F
moel@332	894	v.Add(new Voltage("CPU VCore", 0));
moel@332	895	v.Add(new Voltage("+12V", 1, 11, 1));
moel@332	896	v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332	897	v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332	898	v.Add(new Voltage("+5V", 4, 12, 3));
moel@332	899	v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332	900	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332	901	t.Add(new Temperature("CPU", 0));
moel@332	902	t.Add(new Temperature("Motherboard", 3));
moel@332	903	for (int i = 0; i < superIO.Fans.Length; i++)
moel@332	904	f.Add(new Fan("Fan #" + (i + 1), i));
moel@332	905	break;
moel@265	906	default:
moel@265	907	v.Add(new Voltage("CPU VCore", 0));
moel@265	908	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	909	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	910	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	911	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	912	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	913	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	914	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	915	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	916	t.Add(new Temperature("CPU Core", 0));
moel@354	917	t.Add(new Temperature("Temperature #1", 1));
moel@354	918	t.Add(new Temperature("Temperature #2", 2));
moel@354	919	t.Add(new Temperature("Temperature #3", 3));
moel@265	920	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	921	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	922	break;
moel@265	923	}
moel@265	924	break;
moel@265	925	default:
moel@265	926	v.Add(new Voltage("CPU VCore", 0));
moel@265	927	v.Add(new Voltage("Voltage #2", 1, true));
moel@265	928	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265	929	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265	930	v.Add(new Voltage("Voltage #5", 4, true));
moel@265	931	v.Add(new Voltage("Voltage #6", 5, true));
moel@265	932	v.Add(new Voltage("Voltage #7", 6, true));
moel@265	933	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265	934	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354	935	t.Add(new Temperature("CPU Core", 0));
moel@354	936	t.Add(new Temperature("Temperature #1", 1));
moel@354	937	t.Add(new Temperature("Temperature #2", 2));
moel@354	938	t.Add(new Temperature("Temperature #3", 3));
moel@265	939	for (int i = 0; i < superIO.Fans.Length; i++)
moel@265	940	f.Add(new Fan("Fan #" + (i + 1), i));
moel@265	941	break;
moel@265	942	}
moel@245	943	break;
moel@356	944	case Chip.NCT6779D:
moel@356	945	v.Add(new Voltage("CPU VCore", 0));
moel@356	946	v.Add(new Voltage("Voltage #2", 1, true));
moel@356	947	v.Add(new Voltage("AVCC", 2, 34, 34));
moel@356	948	v.Add(new Voltage("3VCC", 3, 34, 34));
moel@356	949	v.Add(new Voltage("Voltage #5", 4, true));
moel@356	950	v.Add(new Voltage("Voltage #6", 5, true));
moel@356	951	v.Add(new Voltage("Voltage #7", 6, true));
moel@356	952	v.Add(new Voltage("3VSB", 7, 34, 34));
moel@356	953	v.Add(new Voltage("VBAT", 8, 34, 34));
moel@356	954	v.Add(new Voltage("VTT", 9));
moel@356	955	v.Add(new Voltage("Voltage #11", 10, true));
moel@356	956	v.Add(new Voltage("Voltage #12", 11, true));
moel@356	957	v.Add(new Voltage("Voltage #13", 12, true));
moel@356	958	v.Add(new Voltage("Voltage #14", 13, true));
moel@356	959	v.Add(new Voltage("Voltage #15", 14, true));
moel@356	960	t.Add(new Temperature("CPU Core", 0));
moel@356	961	t.Add(new Temperature("Temperature #1", 1));
moel@356	962	t.Add(new Temperature("Temperature #2", 2));
moel@356	963	t.Add(new Temperature("Temperature #3", 3));
moel@356	964	t.Add(new Temperature("Temperature #4", 4));
moel@356	965	t.Add(new Temperature("Temperature #5", 5));
moel@356	966	t.Add(new Temperature("Temperature #6", 6));
moel@356	967	for (int i = 0; i < superIO.Fans.Length; i++)
moel@356	968	f.Add(new Fan("Fan #" + (i + 1), i));
moel@356	969	for (int i = 0; i < superIO.Controls.Length; i++)
moel@356	970	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@356	971	break;
moel@130	972	default:
moel@130	973	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	974	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	975	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	976	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	977	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	978	f.Add(new Fan("Fan #" + (i + 1), i));
moel@323	979	for (int i = 0; i < superIO.Controls.Length; i++)
moel@323	980	c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130	981	break;
moel@130	982	}
moel@130	983
moel@195	984	const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	985	foreach (Voltage voltage in v)
moel@130	986	if (voltage.Index < superIO.Voltages.Length) {
moel@130	987	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195	988	voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130	989	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	990	formula, voltage.Ri),
moel@130	991	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	992	formula, voltage.Rf),
moel@130	993	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	994	formula, voltage.Vf)
moel@165	995	}, settings);
moel@130	996	voltages.Add(sensor);
moel@130	997	}
moel@130	998
moel@130	999	foreach (Temperature temperature in t)
moel@130	1000	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	1001	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195	1002	SensorType.Temperature, this, new [] {
moel@130	1003	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	1004	}, settings);
moel@130	1005	temperatures.Add(sensor);
moel@130	1006	}
moel@130	1007
moel@130	1008	foreach (Fan fan in f)
moel@130	1009	if (fan.Index < superIO.Fans.Length) {
moel@134	1010	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	1011	this, settings);
moel@130	1012	fans.Add(sensor);
moel@130	1013	}
moel@323	1014
moel@323	1015	foreach (Ctrl ctrl in c) {
moel@323	1016	int index = ctrl.Index;
moel@323	1017	if (index < superIO.Controls.Length) {
moel@323	1018	Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323	1019	this, settings);
moel@323	1020	Control control = new Control(sensor, settings, 0, 100);
moel@323	1021	control.ControlModeChanged += (cc) => {
moel@323	1022	if (cc.ControlMode == ControlMode.Default) {
moel@323	1023	superIO.SetControl(index, null);
moel@323	1024	} else {
moel@323	1025	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1026	}
moel@323	1027	};
moel@323	1028	control.SoftwareControlValueChanged += (cc) => {
moel@323	1029	if (cc.ControlMode == ControlMode.Software)
moel@323	1030	superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323	1031	};
moel@323	1032	if (control.ControlMode == ControlMode.Software)
moel@323	1033	superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323	1034	sensor.Control = control;
moel@323	1035	controls.Add(sensor);
moel@323	1036	}
moel@323	1037	}
moel@130	1038	}
moel@130	1039
moel@165	1040	public override HardwareType HardwareType {
moel@165	1041	get { return HardwareType.SuperIO; }
moel@130	1042	}
moel@130	1043
moel@176	1044	public override IHardware Parent {
moel@176	1045	get { return mainboard; }
moel@176	1046	}
moel@176	1047
moel@130	1048
moel@130	1049	public override string GetReport() {
moel@130	1050	return superIO.GetReport();
moel@130	1051	}
moel@130	1052
moel@130	1053	public override void Update() {
moel@130	1054	superIO.Update();
moel@130	1055
moel@130	1056	foreach (Sensor sensor in voltages) {
moel@228	1057	float? value = readVoltage(sensor.Index);
moel@130	1058	if (value.HasValue) {
moel@130	1059	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	1060	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	1061	ActivateSensor(sensor);
moel@130	1062	}
moel@130	1063	}
moel@130	1064
moel@130	1065	foreach (Sensor sensor in temperatures) {
moel@228	1066	float? value = readTemperature(sensor.Index);
moel@130	1067	if (value.HasValue) {
moel@130	1068	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	1069	ActivateSensor(sensor);
moel@130	1070	}
moel@130	1071	}
moel@130	1072
moel@130	1073	foreach (Sensor sensor in fans) {
moel@228	1074	float? value = readFan(sensor.Index);
moel@130	1075	if (value.HasValue) {
moel@130	1076	sensor.Value = value;
moel@130	1077	if (value.Value > 0)
moel@130	1078	ActivateSensor(sensor);
moel@130	1079	}
moel@130	1080	}
moel@228	1081
moel@323	1082	foreach (Sensor sensor in controls) {
moel@323	1083	float? value = readControl(sensor.Index);
moel@323	1084	if (value.HasValue) {
moel@323	1085	sensor.Value = value;
moel@323	1086	ActivateSensor(sensor);
moel@323	1087	}
moel@323	1088	}
moel@323	1089
moel@228	1090	postUpdate();
moel@130	1091	}
moel@130	1092
moel@323	1093	public override void Close() {
moel@323	1094	foreach (Sensor sensor in controls) {
moel@323	1095	// restore all controls back to default
moel@323	1096	superIO.SetControl(sensor.Index, null);
moel@323	1097	}
moel@323	1098	base.Close();
moel@323	1099	}
moel@323	1100
moel@130	1101	private class Voltage {
moel@130	1102	public readonly string Name;
moel@130	1103	public readonly int Index;
moel@130	1104	public readonly float Ri;
moel@130	1105	public readonly float Rf;
moel@130	1106	public readonly float Vf;
moel@130	1107	public readonly bool Hidden;
moel@130	1108
moel@202	1109	public Voltage(string name, int index) :
moel@202	1110	this(name, index, false) { }
moel@202	1111
moel@130	1112	public Voltage(string name, int index, bool hidden) :
moel@130	1113	this(name, index, 0, 1, 0, hidden) { }
moel@202	1114
moel@202	1115	public Voltage(string name, int index, float ri, float rf) :
moel@202	1116	this(name, index, ri, rf, 0, false) { }
moel@202	1117
moel@202	1118	// float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202	1119
moel@195	1120	public Voltage(string name, int index,
moel@202	1121	float ri, float rf, float vf, bool hidden)
moel@195	1122	{
moel@130	1123	this.Name = name;
moel@130	1124	this.Index = index;
moel@130	1125	this.Ri = ri;
moel@130	1126	this.Rf = rf;
moel@130	1127	this.Vf = vf;
moel@130	1128	this.Hidden = hidden;
moel@130	1129	}
moel@130	1130	}
moel@130	1131
moel@130	1132	private class Temperature {
moel@130	1133	public readonly string Name;
moel@130	1134	public readonly int Index;
moel@130	1135
moel@167	1136	public Temperature(string name, int index) {
moel@130	1137	this.Name = name;
moel@130	1138	this.Index = index;
moel@130	1139	}
moel@130	1140	}
moel@130	1141
moel@130	1142	private class Fan {
moel@130	1143	public readonly string Name;
moel@130	1144	public readonly int Index;
moel@130	1145
moel@130	1146	public Fan(string name, int index) {
moel@130	1147	this.Name = name;
moel@130	1148	this.Index = index;
moel@130	1149	}
moel@130	1150	}
moel@323	1151
moel@323	1152	private class Ctrl {
moel@323	1153	public readonly string Name;
moel@323	1154	public readonly int Index;
moel@323	1155
moel@323	1156	public Ctrl(string name, int index) {
moel@323	1157	this.Name = name;
moel@323	1158	this.Index = index;
moel@323	1159	}
moel@323	1160	}
moel@130	1161	}
moel@130	1162	}

author	moel.mich
	Mon, 02 Jul 2012 12:50:03 +0000
changeset 356	e471b1c2b1a6
parent 354	e71b968c04f9
child 357	fb8dc26f65a4
permissions	-rw-r--r--