// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).

 // All rights reserved.

 // This component and the accompanying materials are made available

 // under the terms of "Eclipse Public License v1.0"

 // which accompanies this distribution, and is available

 // at the URL "http://www.eclipse.org/legal/epl-v10.html".

 //

 // Initial Contributors:

 // Nokia Corporation - initial contribution.

 //

 // Contributors:

 //

 // Description:

 // The definitions of the transition classes upon the CDefaultLogOutput class methods.

 // 

 //

 #ifndef __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__

 #define __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__

 #include "DefaultLogOutputTransitions.h"

 // ______________________________________________________________________________

 //

 /**

 	@internalComponent

 	Comments : Provide all the CtorUnit Test's specific

 	validatation for the state of a transition before and after its execution.

 	on the CDefaultLogOutput test class for a transition.

  */

 class TDefaultLogOutput_Ctor_TransitionValidator : public TTransitionValidator

 	{

 public:

 	/**

 		@fn				TDefaultLogOutput_Ctor_TransitionValidator(CUnitTestContext& aUTContext)

 		Intended Usage	:	

 		@leave  		KErrNoMemory

 		@since			7.0

 		@param			aUTContext The context within which this transition is executing

 	 */

 	inline TDefaultLogOutput_Ctor_TransitionValidator(CUnitTestContext& aUTContext);

 	/**

 		@fn				ValidatePreConditions()

 		Intended Usage	: Implemented by the developer to check the

 						end state of the transition behaviour.

 		Error Condition	: Invalid pre-conditions

 		@since			7.0

 		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Ctor_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePreConditions();

 	/**

 		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

 		Intended Usage	:	Implemented by the developer to check the

 						end state of the transition behaviour.

 						When overriding, if the transition calls an asynchronous function

 						ValidatePostConditions will be called twice. Firstly, after the

 						asynchronous function has been called and, secondly, after the 

 						asynchronous request has completed. The parameter aAsyncState can

 						be used to distinguish between these two cases.

 		Error Condition	: Invalid post-conditions.

 		@since			7.0

 		@param			aAsyncState EAsyncCalled if the async function has been just been called,

 						EAsyncCompleted if the function has completed.

 		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Ctor_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

 	};	// TDefaultLogOutput_Ctor_TransitionValidator

 // ______________________________________________________________________________

 //

 /**

 	@internalComponent

 	Comments : Provide all the DtorUnit Test's specific

 	validatation for the state of a transition before and after its execution.

 	on the CDefaultLogOutput test class for a transition.

  */

 class TDefaultLogOutput_Dtor_TransitionValidator : public TTransitionValidator

 	{

 public:

 	/**

 		@fn				TDefaultLogOutput_Dtor_TransitionValidator(CUnitTestContext& aUTContext)

 		Intended Usage	:	

 		@leave  		KErrNoMemory

 		@since			7.0

 		@param			aUTContext The context within which this transition is executing

 	 */

 	inline TDefaultLogOutput_Dtor_TransitionValidator(CUnitTestContext& aUTContext);

 	/**

 		@fn				ValidatePreConditions()

 		Intended Usage	: Implemented by the developer to check the

 						end state of the transition behaviour.

 		Error Condition	: Invalid pre-conditions

 		@since			7.0

 		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Dtor_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePreConditions();

 	/**

 		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

 		Intended Usage	:	Implemented by the developer to check the

 						end state of the transition behaviour.

 						When overriding, if the transition calls an asynchronous function

 						ValidatePostConditions will be called twice. Firstly, after the

 						asynchronous function has been called and, secondly, after the 

 						asynchronous request has completed. The parameter aAsyncState can

 						be used to distinguish between these two cases.

 		Error Condition	: Invalid post-conditions.

 		@since			7.0

 		@param			aAsyncState EAsyncCalled if the async function has been just been called,

 						EAsyncCompleted if the function has completed.

 		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Dtor_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

 	};	// TDefaultLogOutput_Dtor_TransitionValidator

 // ______________________________________________________________________________

 //

 /**

 	@internalComponent

 	Comments : Provide all the OpenUnit Test's specific

 	validatation for the state of a transition before and after its execution.

 	on the CDefaultLogOutput test class for a transition.

  */

 class TDefaultLogOutput_Open_TransitionValidator : public TTransitionValidator

 	{

 public:

 	/**

 		@fn				TDefaultLogOutput_Open_TransitionValidator(CUnitTestContext& aUTContext)

 		Intended Usage	:	

 		@leave  		KErrNoMemory

 		@since			7.0

 		@param			aUTContext The context within which this transition is executing

 	 */

 	inline TDefaultLogOutput_Open_TransitionValidator(CUnitTestContext& aUTContext);

 	/**

 		@fn				ValidatePreConditions()

 		Intended Usage	: Implemented by the developer to check the

 						end state of the transition behaviour.

 		Error Condition	: Invalid pre-conditions

 		@since			7.0

 		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Open_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePreConditions();

 	/**

 		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

 		Intended Usage	:	Implemented by the developer to check the

 						end state of the transition behaviour.

 						When overriding, if the transition calls an asynchronous function

 						ValidatePostConditions will be called twice. Firstly, after the

 						asynchronous function has been called and, secondly, after the 

 						asynchronous request has completed. The parameter aAsyncState can

 						be used to distinguish between these two cases.

 		Error Condition	: Invalid post-conditions.

 		@since			7.0

 		@param			aAsyncState EAsyncCalled if the async function has been just been called,

 						EAsyncCompleted if the function has completed.

 		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Open_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

 	};	// TDefaultLogOutput_Open_TransitionValidator

 // ______________________________________________________________________________

 //

 /**

 	@internalComponent

 	Comments : Provide all the CloseUnit Test's specific

 	validatation for the state of a transition before and after its execution.

 	on the CDefaultLogOutput test class for a transition.

  */

 class TDefaultLogOutput_Close_TransitionValidator : public TTransitionValidator

 	{

 public:

 	/**

 		@fn				TDefaultLogOutput_Close_TransitionValidator(CUnitTestContext& aUTContext)

 		Intended Usage	:	

 		@leave  		KErrNoMemory

 		@since			7.0

 		@param			aUTContext The context within which this transition is executing

 	 */

 	inline TDefaultLogOutput_Close_TransitionValidator(CUnitTestContext& aUTContext);

 	/**

 		@fn				ValidatePreConditions()

 		Intended Usage	: Implemented by the developer to check the

 						end state of the transition behaviour.

 		Error Condition	: Invalid pre-conditions

 		@since			7.0

 		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Close_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePreConditions();

 	/**

 		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

 		Intended Usage	:	Implemented by the developer to check the

 						end state of the transition behaviour.

 						When overriding, if the transition calls an asynchronous function

 						ValidatePostConditions will be called twice. Firstly, after the

 						asynchronous function has been called and, secondly, after the 

 						asynchronous request has completed. The parameter aAsyncState can

 						be used to distinguish between these two cases.

 		Error Condition	: Invalid post-conditions.

 		@since			7.0

 		@param			aAsyncState EAsyncCalled if the async function has been just been called,

 						EAsyncCompleted if the function has completed.

 		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Close_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

 	};	// TDefaultLogOutput_Close_TransitionValidator

 // ______________________________________________________________________________

 //

 /**

 	@internalComponent

 	Comments : Provide all the WriteUnit Test's specific

 	validatation for the state of a transition before and after its execution.

 	on the CDefaultLogOutput test class for a transition.

  */

 class TDefaultLogOutput_Write_TransitionValidator : public TTransitionValidator

 	{

 public:

 	/**

 		@fn				TDefaultLogOutput_Write_TransitionValidator(CUnitTestContext& aUTContext)

 		Intended Usage	:	

 		@leave  		KErrNoMemory

 		@since			7.0

 		@param			aUTContext The context within which this transition is executing

 	 */

 	inline TDefaultLogOutput_Write_TransitionValidator(CUnitTestContext& aUTContext);

 	/**

 		@fn				ValidatePreConditions()

 		Intended Usage	: Implemented by the developer to check the

 						end state of the transition behaviour.

 		Error Condition	: Invalid pre-conditions

 		@since			7.0

 		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Write_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePreConditions();

 	/**

 		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

 		Intended Usage	:	Implemented by the developer to check the

 						end state of the transition behaviour.

 						When overriding, if the transition calls an asynchronous function

 						ValidatePostConditions will be called twice. Firstly, after the

 						asynchronous function has been called and, secondly, after the 

 						asynchronous request has completed. The parameter aAsyncState can

 						be used to distinguish between these two cases.

 		Error Condition	: Invalid post-conditions.

 		@since			7.0

 		@param			aAsyncState EAsyncCalled if the async function has been just been called,

 						EAsyncCompleted if the function has completed.

 		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

 		@pre 			TDefaultLogOutput_Write_TransitionValidator is fully constructed.

 		@post			No change to the iUTContext class.

 	*/

 	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

 	};	// TDefaultLogOutput_Write_TransitionValidator

 #include "DefaultLogOutputTransitionValidation.inl"

 #endif // __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__