// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// The definitions of the transition classes upon the CDataLogger class methods.

// 

//

#ifndef __DATALOGGERTRANSITIONVALIDATION_H__

#define __DATALOGGERTRANSITIONVALIDATION_H__

#include "DataLoggerTransitions.h"

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the CtorUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_Ctor_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_Ctor_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_Ctor_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_Ctor_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_Ctor_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_Ctor_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the DtorUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_Dtor_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_Dtor_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_Dtor_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_Dtor_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_Dtor_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_Dtor_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the DumpMemoryBlockUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_DumpMemoryBlock_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_DumpMemoryBlock_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_DumpMemoryBlock_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_DumpMemoryBlock_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_DumpMemoryBlock_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_DumpMemoryBlock_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the LogInformationUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_LogInformation_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_LogInformation_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_LogInformation_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformation_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformation_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_LogInformation_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the LogInformationNarrowUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_LogInformationNarrow_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_LogInformationNarrow_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_LogInformationNarrow_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationNarrow_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationNarrow_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_LogInformationNarrow_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the LogInformationWithParametersUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_LogInformationWithParameters_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_LogInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_LogInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationWithParameters_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationWithParameters_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_LogInformationWithParameters_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the LogInformationWithParametersNarrowUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_LogInformationWithParametersNarrow_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_LogInformationWithParametersNarrow_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_LogInformationWithParametersNarrow_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationWithParametersNarrow_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_LogInformationWithParametersNarrow_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_LogInformationWithParametersNarrow_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the ReportInformationUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_ReportInformation_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_ReportInformation_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_ReportInformation_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_ReportInformation_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_ReportInformation_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_ReportInformation_TransitionValidator

// ______________________________________________________________________________

//

/**

	@internalComponent

	Comments : Provide all the ReportInformationWithParametersUnit Test's specific

	validatation for the state of a transition before and after its execution.

	on the CDataLogger test class for a transition.

 */

class TDataLogger_ReportInformationWithParameters_TransitionValidator : public TTransitionValidator

	{

public:

	/**

		@fn				TDataLogger_ReportInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext)

		Intended Usage	:	

		@leave  		KErrNoMemory

		@since			7.0

		@param			aUTContext The context within which this transition is executing

	 */

	inline TDataLogger_ReportInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext);

	/**

		@fn				ValidatePreConditions()

		Intended Usage	: Implemented by the developer to check the

						end state of the transition behaviour.

		Error Condition	: Invalid pre-conditions

		@since			7.0

		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_ReportInformationWithParameters_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePreConditions();

	/**

		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)

		Intended Usage	:	Implemented by the developer to check the

						end state of the transition behaviour.

						When overriding, if the transition calls an asynchronous function

						ValidatePostConditions will be called twice. Firstly, after the

						asynchronous function has been called and, secondly, after the 

						asynchronous request has completed. The parameter aAsyncState can

						be used to distinguish between these two cases.

		Error Condition	: Invalid post-conditions.

		@since			7.0

		@param			aAsyncState EAsyncCalled if the async function has been just been called,

						EAsyncCompleted if the function has completed.

		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.

		@pre 			TDataLogger_ReportInformationWithParameters_TransitionValidator is fully constructed.

		@post			No change to the iUTContext class.

	*/

	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);

	};	// TDataLogger_ReportInformationWithParameters_TransitionValidator

#include "DataLoggerTransitionValidation.inl"

#endif // __DATALOGGERTRANSITIONVALIDATION_H__