/*

   Version: MPL 1.1/GPL 2.0/LGPL 2.1

   The contents of this file are subject to the Mozilla Public License Version

   1.1 (the "License"); you may not use this file except in compliance with

   the License. You may obtain a copy of the License at

   http://www.mozilla.org/MPL/

   Software distributed under the License is distributed on an "AS IS" basis,

   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

   for the specific language governing rights and limitations under the License.

   The Original Code is the Open Hardware Monitor code.

   The Initial Developer of the Original Code is 

   Michael Möller <m.moeller@gmx.ch>.

   Portions created by the Initial Developer are Copyright (C) 2009-2010

   the Initial Developer. All Rights Reserved.

   Contributor(s):

   Alternatively, the contents of this file may be used under the terms of

   either the GNU General Public License Version 2 or later (the "GPL"), or

   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

   in which case the provisions of the GPL or the LGPL are applicable instead

   of those above. If you wish to allow use of your version of this file only

   under the terms of either the GPL or the LGPL, and not to allow others to

   use your version of this file under the terms of the MPL, indicate your

   decision by deleting the provisions above and replace them with the notice

   and other provisions required by the GPL or the LGPL. If you do not delete

   the provisions above, a recipient may use your version of this file under

   the terms of any one of the MPL, the GPL or the LGPL.

 */

 using System;

 using System.Threading;

 namespace OpenHardwareMonitor.Hardware.CPU {

   internal sealed class AMD0FCPU : GenericCPU {

     private uint pciAddress;

     private Sensor[] coreTemperatures;

     private Sensor[] coreClocks;

     private Sensor busClock;

     private const ushort PCI_AMD_VENDOR_ID = 0x1022;

     private const ushort PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID = 0x1103;

     private const uint FIDVID_STATUS = 0xC0010042;

     private const uint THERMTRIP_STATUS_REGISTER = 0xE4;

     private const byte THERM_SENSE_CORE_SEL_CPU0 = 0x4;

     private const byte THERM_SENSE_CORE_SEL_CPU1 = 0x0;

     public AMD0FCPU(int processorIndex, CPUID[][] cpuid, ISettings settings)

       : base(processorIndex, cpuid, settings) 

     {

       float offset = -49.0f;

       // AM2+ 65nm +21 offset

       uint model = cpuid[0][0].Model;

       if (model >= 0x69 && model != 0xc1 && model != 0x6c && model != 0x7c) 

         offset += 21;

       // check if processor supports a digital thermal sensor 

       if (cpuid[0][0].ExtData.GetLength(0) > 7 && 

         (cpuid[0][0].ExtData[7, 3] & 1) != 0) 

       {

         coreTemperatures = new Sensor[coreCount];

         for (int i = 0; i < coreCount; i++) {

           coreTemperatures[i] =

             new Sensor("Core #" + (i + 1), i, SensorType.Temperature,

               this, new ParameterDescription[] { 

                 new ParameterDescription("Offset [°C]", 

                   "Temperature offset of the thermal sensor.\n" + 

                   "Temperature = Value + Offset.", offset)

           }, settings);

         }

       } else {

         coreTemperatures = new Sensor[0];

       }

       pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,

         PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID, (byte)processorIndex);

       busClock = new Sensor("Bus Speed", 0, SensorType.Clock, this, settings);

       coreClocks = new Sensor[coreCount];

       for (int i = 0; i < coreClocks.Length; i++) {

         coreClocks[i] = new Sensor(CoreString(i), i + 1, SensorType.Clock, this, settings);

         if (hasTSC)

           ActivateSensor(coreClocks[i]);

       }

       Update();                   

     }

     protected override uint[] GetMSRs() {

       return new uint[] { };

     }

     public override void Update() {

       base.Update();

       if (pciAddress != 0xFFFFFFFF) {

         for (uint i = 0; i < coreTemperatures.Length; i++) {

           if (WinRing0.WritePciConfigDwordEx(

             pciAddress, THERMTRIP_STATUS_REGISTER,

             i > 0 ? THERM_SENSE_CORE_SEL_CPU1 : THERM_SENSE_CORE_SEL_CPU0)) {

             uint value;

             if (WinRing0.ReadPciConfigDwordEx(

               pciAddress, THERMTRIP_STATUS_REGISTER, out value)) {

               coreTemperatures[i].Value = ((value >> 16) & 0xFF) + 

                 coreTemperatures[i].Parameters[0].Value;

               ActivateSensor(coreTemperatures[i]);

             } else {

               DeactivateSensor(coreTemperatures[i]);

             }

           }

         }

       }

       if (hasTSC) {

         double newBusClock = 0;

         for (int i = 0; i < coreClocks.Length; i++) {

           Thread.Sleep(1);

           coreClocks[i].Value = (float)MaxClock; // Fail-safe value - if the code below fails, we'll use this instead

           uint eax, edx;

           if (WinRing0.RdmsrTx(FIDVID_STATUS, out eax, out edx, (UIntPtr)(1L << cpuid[i][0].Thread))) {

             // CurrFID can be found in eax bits 0-5, MaxFID in 16-21

             // 8-13 hold StartFID, we don't use that here.

             double curMP = 0.5 * ((eax & 0x3F) + 8);

             double maxMP = 0.5 * ((eax >> 16 & 0x3F) + 8);

             coreClocks[i].Value = (float)(curMP * MaxClock / maxMP);

             newBusClock = (float)(MaxClock / maxMP);

           }

         }

         if (newBusClock > 0) {

           this.busClock.Value = (float)newBusClock;

           ActivateSensor(this.busClock);

         }

       }

     }  

   }

 }