OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@119693c3b7d1 (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@130	19	Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@130	38	using System;
moel@130	39	using System.Collections.Generic;
moel@130	40	using System.Drawing;
moel@130	41	using OpenHardwareMonitor.Hardware.LPC;
moel@130	42
moel@130	43	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@130	44	public class SuperIOHardware : Hardware {
moel@130	45
moel@130	46	private ISuperIO superIO;
moel@130	47	private Image icon;
moel@130	48	protected readonly string name;
moel@130	49
moel@130	50	private List<Sensor> voltages = new List<Sensor>();
moel@130	51	private List<Sensor> temperatures = new List<Sensor>();
moel@130	52	private List<Sensor> fans = new List<Sensor>();
moel@130	53
moel@130	54	public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer,
moel@130	55	Model model)
moel@130	56	{
moel@130	57	this.superIO = superIO;
moel@130	58	this.icon = Utilities.EmbeddedResources.GetImage("chip.png");
moel@130	59
moel@130	60	switch (superIO.Chip) {
moel@130	61	case Chip.F71858: name = "Fintek F71858"; break;
moel@130	62	case Chip.F71862: name = "Fintek F71862"; break;
moel@130	63	case Chip.F71869: name = "Fintek F71869"; break;
moel@130	64	case Chip.F71882: name = "Fintek F71882"; break;
moel@130	65	case Chip.F71889ED: name = "Fintek F71889ED"; break;
moel@130	66	case Chip.F71889F: name = "Fintek F71889F"; break;
moel@130	67	case Chip.IT8712F: this.name = "ITE IT8712F"; break;
moel@130	68	case Chip.IT8716F: this.name = "ITE IT8716F"; break;
moel@130	69	case Chip.IT8718F: this.name = "ITE IT8718F"; break;
moel@130	70	case Chip.IT8720F: this.name = "ITE IT8720F"; break;
moel@130	71	case Chip.IT8726F: this.name = "ITE IT8726F"; break;
moel@130	72	case Chip.W83627DHG: this.name = "Winbond W83627DHG"; break;
moel@130	73	case Chip.W83627DHGP: this.name = "Winbond W83627DHG-P"; break;
moel@130	74	case Chip.W83627EHF: this.name = "Winbond W83627EHF"; break;
moel@130	75	case Chip.W83627HF: this.name = "Winbond W83627HF"; break;
moel@130	76	case Chip.W83627THF: this.name = "Winbond W83627THF"; break;
moel@130	77	case Chip.W83667HG: this.name = "Winbond W83667HG"; break;
moel@130	78	case Chip.W83667HGB: this.name = "Winbond W83667HG-B"; break;
moel@130	79	case Chip.W83687THF: this.name = "Winbond W83687THF"; break;
moel@135	80	case Chip.Unknown: this.name = "Unkown"; break;
moel@130	81	}
moel@130	82
moel@130	83	List<Voltage> v = new List<Voltage>();
moel@130	84	List<Temperature> t = new List<Temperature>();
moel@130	85	List<Fan> f = new List<Fan>();
moel@130	86
moel@130	87	switch (superIO.Chip) {
moel@130	88	case Chip.IT8712F:
moel@130	89	case Chip.IT8716F:
moel@130	90	case Chip.IT8718F:
moel@130	91	case Chip.IT8720F:
moel@130	92	case Chip.IT8726F:
moel@130	93	switch (manufacturer) {
moel@133	94	case Manufacturer.ASUS:
moel@133	95	switch (model) {
moel@133	96	case Model.Crosshair_III_Formula:
moel@133	97	v.Add(new Voltage("VBat", 8));
moel@133	98	t.Add(new Temperature("CPU", 0));
moel@133	99	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	100	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	101	break;
moel@144	102	case Model.M2N_SLI_DELUXE:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("+3.3V", 1));
moel@133	105	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	106	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@133	107	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@133	108	v.Add(new Voltage("VBat", 8));
moel@133	109	t.Add(new Temperature("CPU", 0));
moel@133	110	t.Add(new Temperature("Motherboard", 1));
moel@133	111	f.Add(new Fan("CPU Fan", 0));
moel@133	112	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	113	f.Add(new Fan("Power Fan", 2));
moel@133	114	break;
moel@146	115	case Model.M4A79XTD_EVO:
moel@144	116	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@144	117	v.Add(new Voltage("VBat", 8));
moel@144	118	t.Add(new Temperature("CPU", 0));
moel@144	119	t.Add(new Temperature("Motherboard", 1));
moel@144	120	f.Add(new Fan("CPU Fan", 0));
moel@144	121	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	122	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	123	break;
moel@133	124	default:
moel@133	125	v.Add(new Voltage("CPU VCore", 0));
moel@133	126	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	127	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	128	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	129	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	130	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	131	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	132	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	133	v.Add(new Voltage("VBat", 8));
moel@133	134	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	135	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	136	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	137	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	138	break;
moel@133	139	}
moel@133	140	break;
moel@130	141	case Manufacturer.DFI:
moel@130	142	switch (model) {
moel@130	143	case Model.LP_BI_P45_T2RS_Elite:
moel@130	144	v.Add(new Voltage("CPU VCore", 0));
moel@130	145	v.Add(new Voltage("FSB VTT", 1));
moel@130	146	v.Add(new Voltage("+3.3V", 2));
moel@130	147	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	148	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	149	v.Add(new Voltage("NB Core", 5));
moel@130	150	v.Add(new Voltage("VDIMM", 6));
moel@130	151	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	152	v.Add(new Voltage("VBat", 8));
moel@130	153	t.Add(new Temperature("CPU", 0));
moel@130	154	t.Add(new Temperature("System", 1));
moel@130	155	t.Add(new Temperature("Chipset", 2));
moel@130	156	f.Add(new Fan("Fan #1", 0));
moel@130	157	f.Add(new Fan("Fan #2", 1));
moel@130	158	f.Add(new Fan("Fan #3", 2));
moel@130	159	break;
moel@130	160	case Model.LP_DK_P55_T3eH9:
moel@130	161	v.Add(new Voltage("CPU VCore", 0));
moel@130	162	v.Add(new Voltage("VTT", 1));
moel@130	163	v.Add(new Voltage("+3.3V", 2));
moel@130	164	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	165	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	166	v.Add(new Voltage("CPU PLL", 5));
moel@130	167	v.Add(new Voltage("DRAM", 6));
moel@130	168	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	169	v.Add(new Voltage("VBat", 8));
moel@130	170	t.Add(new Temperature("Chipset", 0));
moel@130	171	t.Add(new Temperature("CPU PWM", 1));
moel@130	172	t.Add(new Temperature("CPU", 2));
moel@130	173	f.Add(new Fan("Fan #1", 0));
moel@130	174	f.Add(new Fan("Fan #2", 1));
moel@130	175	f.Add(new Fan("Fan #3", 2));
moel@130	176	break;
moel@130	177	default:
moel@130	178	v.Add(new Voltage("CPU VCore", 0));
moel@130	179	v.Add(new Voltage("VTT", 1, true));
moel@130	180	v.Add(new Voltage("+3.3V", 2, true));
moel@130	181	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	182	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	183	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	184	v.Add(new Voltage("DRAM", 6, true));
moel@130	185	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	186	v.Add(new Voltage("VBat", 8));
moel@130	187	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	188	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	189	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	190	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	191	break;
moel@130	192	}
moel@130	193	break;
moel@130	194
moel@130	195	case Manufacturer.Gigabyte:
moel@130	196	switch (model) {
moel@130	197	case Model._965P_S3:
moel@130	198	v.Add(new Voltage("CPU VCore", 0));
moel@130	199	v.Add(new Voltage("DRAM", 1));
moel@130	200	v.Add(new Voltage("+3.3V", 2));
moel@130	201	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	202	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	203	v.Add(new Voltage("VBat", 8));
moel@130	204	t.Add(new Temperature("System", 0));
moel@130	205	t.Add(new Temperature("CPU", 1));
moel@130	206	f.Add(new Fan("CPU Fan", 0));
moel@130	207	f.Add(new Fan("System Fan", 1));
moel@130	208	break;
moel@130	209	case Model.EP45_DS3R:
moel@130	210	case Model.EP45_UD3R:
moel@138	211	case Model.X38_DS5:
moel@130	212	v.Add(new Voltage("CPU VCore", 0));
moel@130	213	v.Add(new Voltage("DRAM", 1));
moel@130	214	v.Add(new Voltage("+3.3V", 2));
moel@130	215	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	216	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	217	v.Add(new Voltage("VBat", 8));
moel@130	218	t.Add(new Temperature("System", 0));
moel@130	219	t.Add(new Temperature("CPU", 1));
moel@130	220	f.Add(new Fan("CPU Fan", 0));
moel@130	221	f.Add(new Fan("System Fan #2", 1));
moel@130	222	f.Add(new Fan("Power Fan", 2));
moel@130	223	f.Add(new Fan("System Fan #1", 3));
moel@130	224	break;
moel@133	225	case Model.EX58_EXTREME:
moel@133	226	v.Add(new Voltage("CPU VCore", 0));
moel@133	227	v.Add(new Voltage("DRAM", 1));
moel@133	228	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	229	v.Add(new Voltage("VBat", 8));
moel@133	230	t.Add(new Temperature("System", 0));
moel@133	231	t.Add(new Temperature("CPU", 1));
moel@138	232	t.Add(new Temperature("Northbridge", 2));
moel@133	233	f.Add(new Fan("CPU Fan", 0));
moel@133	234	f.Add(new Fan("System Fan #2", 1));
moel@133	235	f.Add(new Fan("Power Fan", 2));
moel@133	236	f.Add(new Fan("System Fan #1", 3));
moel@133	237	break;
moel@130	238	case Model.P35_DS3:
moel@154	239	case Model.P35_DS3L:
moel@130	240	v.Add(new Voltage("CPU VCore", 0));
moel@130	241	v.Add(new Voltage("DRAM", 1));
moel@130	242	v.Add(new Voltage("+3.3V", 2));
moel@130	243	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	244	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	245	v.Add(new Voltage("VBat", 8));
moel@130	246	t.Add(new Temperature("System", 0));
moel@130	247	t.Add(new Temperature("CPU", 1));
moel@130	248	f.Add(new Fan("CPU Fan", 0));
moel@130	249	f.Add(new Fan("System Fan #1", 1));
moel@130	250	f.Add(new Fan("System Fan #2", 2));
moel@130	251	f.Add(new Fan("Power Fan", 3));
moel@130	252	break;
moel@154	253	case Model.P55_UD4:
moel@148	254	v.Add(new Voltage("CPU VCore", 0));
moel@148	255	v.Add(new Voltage("DRAM", 1));
moel@148	256	v.Add(new Voltage("+3.3V", 2));
moel@148	257	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@148	258	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@148	259	v.Add(new Voltage("VBat", 8));
moel@148	260	t.Add(new Temperature("System", 0));
moel@148	261	t.Add(new Temperature("CPU", 2));
moel@148	262	f.Add(new Fan("CPU Fan", 0));
moel@148	263	f.Add(new Fan("System Fan #2", 1));
moel@148	264	f.Add(new Fan("Power Fan", 2));
moel@148	265	f.Add(new Fan("System Fan #1", 3));
moel@148	266	break;
moel@154	267	case Model.GA_MA770T_UD3:
moel@154	268	v.Add(new Voltage("CPU VCore", 0));
moel@154	269	v.Add(new Voltage("DRAM", 1));
moel@154	270	v.Add(new Voltage("+3.3V", 2));
moel@154	271	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@154	272	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@154	273	v.Add(new Voltage("VBat", 8));
moel@154	274	t.Add(new Temperature("System", 0));
moel@154	275	t.Add(new Temperature("CPU", 1));
moel@154	276	f.Add(new Fan("CPU Fan", 0));
moel@154	277	f.Add(new Fan("System Fan #1", 1));
moel@154	278	f.Add(new Fan("System Fan #2", 2));
moel@154	279	f.Add(new Fan("Power Fan", 3));
moel@154	280	break;
moel@130	281	case Model.GA_MA785GMT_UD2H:
moel@130	282	v.Add(new Voltage("CPU VCore", 0));
moel@130	283	v.Add(new Voltage("DRAM", 1));
moel@130	284	v.Add(new Voltage("+3.3V", 2));
moel@130	285	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	286	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@130	287	v.Add(new Voltage("VBat", 8));
moel@130	288	t.Add(new Temperature("System", 0));
moel@130	289	t.Add(new Temperature("CPU", 1));
moel@130	290	f.Add(new Fan("CPU Fan", 0));
moel@130	291	f.Add(new Fan("System Fan", 1));
moel@130	292	f.Add(new Fan("NB Fan", 2));
moel@130	293	break;
moel@138	294	case Model.X58A_UD3R:
moel@138	295	v.Add(new Voltage("CPU VCore", 0));
moel@138	296	v.Add(new Voltage("DRAM", 1));
moel@138	297	v.Add(new Voltage("+3.3V", 2));
moel@138	298	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@138	299	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@138	300	v.Add(new Voltage("VBat", 8));
moel@138	301	t.Add(new Temperature("System", 0));
moel@138	302	t.Add(new Temperature("CPU", 1));
moel@138	303	t.Add(new Temperature("Northbridge", 2));
moel@138	304	f.Add(new Fan("CPU Fan", 0));
moel@138	305	f.Add(new Fan("System Fan #2", 1));
moel@138	306	f.Add(new Fan("Power Fan", 2));
moel@138	307	f.Add(new Fan("System Fan #1", 3));
moel@138	308	break;
moel@130	309	default:
moel@130	310	v.Add(new Voltage("CPU VCore", 0));
moel@130	311	v.Add(new Voltage("DRAM", 1, true));
moel@130	312	v.Add(new Voltage("+3.3V", 2, true));
moel@130	313	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	314	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	315	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	316	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	317	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130	318	v.Add(new Voltage("VBat", 8));
moel@130	319	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	320	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	321	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	322	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	323	break;
moel@130	324	}
moel@130	325	break;
moel@130	326
moel@130	327	default:
moel@130	328	v.Add(new Voltage("CPU VCore", 0));
moel@130	329	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	330	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	331	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	332	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	333	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	334	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	335	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	336	v.Add(new Voltage("VBat", 8));
moel@130	337	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	338	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	339	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	340	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	341	break;
moel@130	342	}
moel@130	343	break;
moel@130	344
moel@130	345	case Chip.F71858:
moel@132	346	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	347	v.Add(new Voltage("VSB3V", 1, 150, 150, 0));
moel@132	348	v.Add(new Voltage("Battery", 2, 150, 150, 0));
moel@130	349	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	350	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	351	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	352	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	353	break;
moel@130	354	case Chip.F71862:
moel@130	355	case Chip.F71869:
moel@130	356	case Chip.F71882:
moel@130	357	case Chip.F71889ED:
moel@130	358	case Chip.F71889F:
moel@132	359	switch (manufacturer) {
moel@132	360	case Manufacturer.EVGA:
moel@132	361	switch (model) {
moel@132	362	case Model.X58_SLI_Classified:
moel@132	363	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	364	v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));
moel@132	365	v.Add(new Voltage("DIMM", 2, 47, 100, 0));
moel@132	366	v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));
moel@132	367	v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));
moel@132	368	v.Add(new Voltage("+5V", 5, 51, 12, 0));
moel@132	369	v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));
moel@132	370	v.Add(new Voltage("3VSB", 7, 150, 150, 0));
moel@132	371	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	372	t.Add(new Temperature("CPU", 0));
moel@132	373	t.Add(new Temperature("VREG", 1));
moel@132	374	t.Add(new Temperature("System", 2));
moel@132	375	f.Add(new Fan("CPU Fan", 0));
moel@132	376	f.Add(new Fan("Power Fan", 1));
moel@132	377	f.Add(new Fan("Chassis Fan", 2));
moel@132	378	break;
moel@132	379	default:
moel@132	380	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	381	v.Add(new Voltage("CPU VCore", 1));
moel@132	382	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	383	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	384	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	385	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	386	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	387	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	388	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	389	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	390	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	391	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	392	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	393	break;
moel@132	394	}
moel@132	395	break;
moel@132	396	default:
moel@132	397	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	398	v.Add(new Voltage("CPU VCore", 1));
moel@132	399	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	400	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	401	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	402	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	403	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	404	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	405	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	406	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	407	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	408	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	409	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	410	break;
moel@132	411	}
moel@130	412	break;
moel@130	413
moel@130	414	case Chip.W83627EHF:
moel@130	415	v.Add(new Voltage("CPU VCore", 0));
moel@130	416	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	417	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@130	418	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@130	419	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	420	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	421	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	422	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@130	423	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@130	424	v.Add(new Voltage("Voltage #10", 9, true));
moel@130	425	t.Add(new Temperature("CPU", 0));
moel@130	426	t.Add(new Temperature("Auxiliary", 1));
moel@130	427	t.Add(new Temperature("System", 2));
moel@153	428	f.Add(new Fan("System Fan", 0));
moel@153	429	f.Add(new Fan("CPU Fan", 1));
moel@153	430	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	431	f.Add(new Fan("CPU Fan #2", 3));
moel@153	432	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@130	433	break;
moel@130	434	case Chip.W83627DHG:
moel@130	435	case Chip.W83627DHGP:
moel@130	436	case Chip.W83667HG:
moel@130	437	case Chip.W83667HGB:
moel@152	438	switch (manufacturer) {
moel@153	439	case Manufacturer.ASRock:
moel@153	440	switch (model) {
moel@153	441	case Model._880GMH_USB3:
moel@153	442	v.Add(new Voltage("CPU VCore", 0));
moel@153	443	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	444	v.Add(new Voltage("+5V", 5, 15, 7.5f, 0));
moel@153	445	v.Add(new Voltage("+12V", 6, 56, 10, 0));
moel@153	446	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@153	447	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	448	t.Add(new Temperature("CPU", 0));
moel@153	449	t.Add(new Temperature("Motherboard", 2));
moel@153	450	f.Add(new Fan("Chassis Fan", 0));
moel@153	451	f.Add(new Fan("CPU Fan", 1));
moel@153	452	f.Add(new Fan("Power Fan", 2));
moel@153	453	break;
moel@153	454	default:
moel@153	455	v.Add(new Voltage("CPU VCore", 0));
moel@153	456	v.Add(new Voltage("Voltage #2", 1, true));
moel@153	457	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@153	458	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@153	459	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	460	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	461	v.Add(new Voltage("Voltage #7", 6, true));
moel@153	462	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@153	463	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	464	t.Add(new Temperature("CPU", 0));
moel@153	465	t.Add(new Temperature("Auxiliary", 1));
moel@153	466	t.Add(new Temperature("System", 2));
moel@153	467	f.Add(new Fan("System Fan", 0));
moel@153	468	f.Add(new Fan("CPU Fan", 1));
moel@153	469	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	470	f.Add(new Fan("CPU Fan #2", 3));
moel@153	471	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	472	break;
moel@153	473	}
moel@153	474	break;
moel@152	475	case Manufacturer.ASUS:
moel@152	476	switch (model) {
moel@152	477	case Model.P6X58D_E:
moel@152	478	v.Add(new Voltage("CPU VCore", 0));
moel@152	479	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f, 0));
moel@152	480	v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));
moel@152	481	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	482	v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));
moel@152	483	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	484	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	485	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@152	486	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	487	t.Add(new Temperature("CPU", 0));
moel@153	488	t.Add(new Temperature("Auxiliary", 1, true));
moel@152	489	t.Add(new Temperature("Motherboard", 2));
moel@152	490	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	491	f.Add(new Fan("CPU Fan", 1));
moel@153	492	f.Add(new Fan("Power Fan", 2));
moel@152	493	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	494	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	495	break;
moel@152	496	default:
moel@152	497	v.Add(new Voltage("CPU VCore", 0));
moel@152	498	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	499	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	500	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	501	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	502	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	503	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	504	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	505	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	506	t.Add(new Temperature("CPU", 0));
moel@152	507	t.Add(new Temperature("Auxiliary", 1));
moel@152	508	t.Add(new Temperature("System", 2));
moel@153	509	f.Add(new Fan("System Fan", 0));
moel@153	510	f.Add(new Fan("CPU Fan", 1));
moel@153	511	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	512	f.Add(new Fan("CPU Fan #2", 3));
moel@153	513	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	514	break;
moel@152	515	}
moel@152	516	break;
moel@152	517	default:
moel@152	518	v.Add(new Voltage("CPU VCore", 0));
moel@152	519	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	520	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	521	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	522	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	523	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	524	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	525	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	526	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	527	t.Add(new Temperature("CPU", 0));
moel@152	528	t.Add(new Temperature("Auxiliary", 1));
moel@152	529	t.Add(new Temperature("System", 2));
moel@153	530	f.Add(new Fan("System Fan", 0));
moel@153	531	f.Add(new Fan("CPU Fan", 1));
moel@153	532	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	533	f.Add(new Fan("CPU Fan #2", 3));
moel@153	534	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	535	break;
moel@152	536	}
moel@130	537	break;
moel@130	538	case Chip.W83627HF:
moel@130	539	case Chip.W83627THF:
moel@130	540	case Chip.W83687THF:
moel@130	541	v.Add(new Voltage("CPU VCore", 0));
moel@130	542	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	543	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	544	v.Add(new Voltage("AVCC", 3, 34, 51, 0));
moel@130	545	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	546	v.Add(new Voltage("5VSB", 5, 34, 51, 0));
moel@130	547	v.Add(new Voltage("VBAT", 6));
moel@130	548	t.Add(new Temperature("CPU", 0));
moel@130	549	t.Add(new Temperature("Auxiliary", 1));
moel@130	550	t.Add(new Temperature("System", 2));
moel@153	551	f.Add(new Fan("System Fan", 0));
moel@153	552	f.Add(new Fan("CPU Fan", 1));
moel@153	553	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	554	break;
moel@130	555	default:
moel@130	556	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	557	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	558	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	559	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	560	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	561	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	562	break;
moel@130	563	}
moel@130	564
moel@130	565	string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	566	foreach (Voltage voltage in v)
moel@130	567	if (voltage.Index < superIO.Voltages.Length) {
moel@130	568	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@134	569	voltage.Hidden, SensorType.Voltage, this,
moel@130	570	new ParameterDescription[] {
moel@130	571	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	572	formula, voltage.Ri),
moel@130	573	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	574	formula, voltage.Rf),
moel@130	575	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	576	formula, voltage.Vf)
moel@130	577	});
moel@130	578	voltages.Add(sensor);
moel@130	579	}
moel@130	580
moel@130	581	foreach (Temperature temperature in t)
moel@130	582	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	583	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@130	584	SensorType.Temperature, this, new ParameterDescription[] {
moel@130	585	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@130	586	});
moel@130	587	temperatures.Add(sensor);
moel@130	588	}
moel@130	589
moel@130	590	foreach (Fan fan in f)
moel@130	591	if (fan.Index < superIO.Fans.Length) {
moel@134	592	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@130	593	this, null);
moel@130	594	fans.Add(sensor);
moel@130	595	}
moel@130	596	}
moel@130	597
moel@130	598	public override Identifier Identifier {
moel@130	599	get { return new Identifier("lpc", superIO.Chip.ToString().ToLower()); }
moel@130	600	}
moel@130	601
moel@130	602	public override Image Icon {
moel@130	603	get { return icon; }
moel@130	604	}
moel@130	605
moel@130	606	public override string Name {
moel@130	607	get { return name; }
moel@130	608	}
moel@130	609
moel@130	610	public override string GetReport() {
moel@130	611	return superIO.GetReport();
moel@130	612	}
moel@130	613
moel@130	614	public override void Update() {
moel@130	615	superIO.Update();
moel@130	616
moel@130	617	foreach (Sensor sensor in voltages) {
moel@130	618	float? value = superIO.Voltages[sensor.Index];
moel@130	619	if (value.HasValue) {
moel@130	620	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	621	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	622	ActivateSensor(sensor);
moel@130	623	}
moel@130	624	}
moel@130	625
moel@130	626	foreach (Sensor sensor in temperatures) {
moel@130	627	float? value = superIO.Temperatures[sensor.Index];
moel@130	628	if (value.HasValue) {
moel@130	629	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	630	ActivateSensor(sensor);
moel@130	631	}
moel@130	632	}
moel@130	633
moel@130	634	foreach (Sensor sensor in fans) {
moel@130	635	float? value = superIO.Fans[sensor.Index];
moel@130	636	if (value.HasValue) {
moel@130	637	sensor.Value = value;
moel@130	638	if (value.Value > 0)
moel@130	639	ActivateSensor(sensor);
moel@130	640	}
moel@130	641	}
moel@130	642	}
moel@130	643
moel@130	644	private class Voltage {
moel@130	645	public readonly string Name;
moel@130	646	public readonly int Index;
moel@130	647	public readonly float Ri;
moel@130	648	public readonly float Rf;
moel@130	649	public readonly float Vf;
moel@130	650	public readonly bool Hidden;
moel@130	651
moel@130	652	public Voltage(string name, int index) :
moel@130	653	this(name, index, 0, 1, 0, false) { }
moel@130	654
moel@130	655	public Voltage(string name, int index, bool hidden) :
moel@130	656	this(name, index, 0, 1, 0, hidden) { }
moel@130	657
moel@130	658	public Voltage(string name, int index, float ri, float rf, float vf) :
moel@130	659	this(name, index, ri, rf, vf, false) { }
moel@130	660
moel@130	661	public Voltage(string name, int index, float ri, float rf, float vf,
moel@130	662	bool hidden) {
moel@130	663	this.Name = name;
moel@130	664	this.Index = index;
moel@130	665	this.Ri = ri;
moel@130	666	this.Rf = rf;
moel@130	667	this.Vf = vf;
moel@130	668	this.Hidden = hidden;
moel@130	669	}
moel@130	670	}
moel@130	671
moel@130	672	private class Temperature {
moel@130	673	public readonly string Name;
moel@130	674	public readonly int Index;
moel@153	675	public readonly bool Hidden;
moel@130	676
moel@153	677	public Temperature(string name, int index) :
moel@153	678	this(name, index, false) { }
moel@153	679
moel@153	680	public Temperature(string name, int index, bool hidden) {
moel@130	681	this.Name = name;
moel@130	682	this.Index = index;
moel@153	683	this.Hidden = hidden;
moel@130	684	}
moel@130	685	}
moel@130	686
moel@130	687	private class Fan {
moel@130	688	public readonly string Name;
moel@130	689	public readonly int Index;
moel@130	690
moel@130	691	public Fan(string name, int index) {
moel@130	692	this.Name = name;
moel@130	693	this.Index = index;
moel@130	694	}
moel@130	695	}
moel@130	696	}
moel@130	697	}

author	moel.mich
	Sat, 24 Jul 2010 20:15:49 +0000
changeset 158	119693c3b7d1
parent 153	62162db94359
child 165	813d8bc3192f
permissions	-rw-r--r--