OpenHardwareMonitor-retired: Hardware/LPC/W836XX.cs@5715aefd2bcc

     1 /*

     3   This Source Code Form is subject to the terms of the Mozilla Public

     4   License, v. 2.0. If a copy of the MPL was not distributed with this

     5   file, You can obtain one at http://mozilla.org/MPL/2.0/.

     7   Copyright (C) 2009-2011 Michael Möller <mmoeller@openhardwaremonitor.org>

     9 */

    11 using System;

    12 using System.Globalization;

    13 using System.Text;

    15 namespace OpenHardwareMonitor.Hardware.LPC {

    16   internal class W836XX : ISuperIO {

    18     private readonly ushort address;

    19     private readonly byte revision;

    21     private readonly Chip chip;

    23     private readonly float?[] voltages = new float?[0];

    24     private readonly float?[] temperatures = new float?[0];

    25     private readonly float?[] fans = new float?[0];

    26     private readonly float?[] controls = new float?[0];

    28     private readonly bool[] peciTemperature = new bool[0];

    29     private readonly byte[] voltageRegister = new byte[0];

    30     private readonly byte[] voltageBank = new byte[0];

    31     private readonly float voltageGain = 0.008f;

    33     // Consts

    34     private const ushort WINBOND_VENDOR_ID = 0x5CA3;

    35     private const byte HIGH_BYTE = 0x80;

    37     // Hardware Monitor

    38     private const byte ADDRESS_REGISTER_OFFSET = 0x05;

    39     private const byte DATA_REGISTER_OFFSET = 0x06;

    41     // Hardware Monitor Registers

    42     private const byte VOLTAGE_VBAT_REG = 0x51;

    43     private const byte BANK_SELECT_REGISTER = 0x4E;

    44     private const byte VENDOR_ID_REGISTER = 0x4F;

    45     private const byte TEMPERATURE_SOURCE_SELECT_REG = 0x49;

    47     private readonly byte[] TEMPERATURE_REG = new byte[] { 0x50, 0x50, 0x27 };

    48     private readonly byte[] TEMPERATURE_BANK = new byte[] { 1, 2, 0 };

    50     private readonly byte[] FAN_TACHO_REG =

    51       new byte[] { 0x28, 0x29, 0x2A, 0x3F, 0x53 };

    52     private readonly byte[] FAN_TACHO_BANK =

    53       new byte[] { 0, 0, 0, 0, 5 };

    54     private readonly byte[] FAN_BIT_REG =

    55       new byte[] { 0x47, 0x4B, 0x4C, 0x59, 0x5D };

    56     private readonly byte[] FAN_DIV_BIT0 = new byte[] { 36, 38, 30, 8, 10 };

    57     private readonly byte[] FAN_DIV_BIT1 = new byte[] { 37, 39, 31, 9, 11 };

    58     private readonly byte[] FAN_DIV_BIT2 = new byte[] { 5, 6, 7, 23, 15 };

    60     private byte ReadByte(byte bank, byte register) {

    61       Ring0.WriteIoPort(

    62          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);

    63       Ring0.WriteIoPort(

    64          (ushort)(address + DATA_REGISTER_OFFSET), bank);

    65       Ring0.WriteIoPort(

    66          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);

    67       return Ring0.ReadIoPort(

    68         (ushort)(address + DATA_REGISTER_OFFSET));

    69     }

    71     private void WriteByte(byte bank, byte register, byte value) {

    72       Ring0.WriteIoPort(

    73          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);

    74       Ring0.WriteIoPort(

    75          (ushort)(address + DATA_REGISTER_OFFSET), bank);

    76       Ring0.WriteIoPort(

    77          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);

    78       Ring0.WriteIoPort(

    79          (ushort)(address + DATA_REGISTER_OFFSET), value);

    80     }

    82     public byte? ReadGPIO(int index) {

    83       return null;

    84     }

    86     public void WriteGPIO(int index, byte value) { }

    88     public void SetControl(int index, byte? value) { }

    90     public W836XX(Chip chip, byte revision, ushort address) {

    91       this.address = address;

    92       this.revision = revision;

    93       this.chip = chip;

    95       if (!IsWinbondVendor())

    96         return;

    98       temperatures = new float?[3];

    99       peciTemperature = new bool[3];

   100       switch (chip) {

   101         case Chip.W83667HG:

   102         case Chip.W83667HGB:

   103           // note temperature sensor registers that read PECI

   104           byte flag = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);

   105           peciTemperature[0] = (flag & 0x04) != 0;

   106           peciTemperature[1] = (flag & 0x40) != 0;

   107           peciTemperature[2] = false;

   108           break;

   109         case Chip.W83627DHG:

   110         case Chip.W83627DHGP:

   111           // note temperature sensor registers that read PECI

   112           byte sel = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);

   113           peciTemperature[0] = (sel & 0x07) != 0;

   114           peciTemperature[1] = (sel & 0x70) != 0;

   115           peciTemperature[2] = false;

   116           break;

   117         default:

   118           // no PECI support

   119           peciTemperature[0] = false;

   120           peciTemperature[1] = false;

   121           peciTemperature[2] = false;

   122           break;

   123       }

   125       switch (chip) {

   126         case Chip.W83627EHF:

   127           voltages = new float?[10];

   128           voltageRegister = new byte[] {

   129             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51, 0x52 };

   130           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5, 5 };

   131           voltageGain = 0.008f;

   132           fans = new float?[5];

   133           break;

   134         case Chip.W83627DHG:

   135         case Chip.W83627DHGP:

   136         case Chip.W83667HG:

   137         case Chip.W83667HGB:

   138           voltages = new float?[9];

   139           voltageRegister = new byte[] {

   140             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51 };

   141           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5 };

   142           voltageGain = 0.008f;

   143           fans = new float?[5];

   144           break;

   145         case Chip.W83627HF:

   146         case Chip.W83627THF:

   147         case Chip.W83687THF:

   148           voltages = new float?[7];

   149           voltageRegister = new byte[] {

   150             0x20, 0x21, 0x22, 0x23, 0x24, 0x50, 0x51 };

   151           voltageBank = new byte[] { 0, 0, 0, 0, 0, 5, 5 };

   152           voltageGain = 0.016f;

   153           fans = new float?[3];

   154           break;

   155       }

   156     }

   158     private bool IsWinbondVendor() {

   159       ushort vendorId =

   160         (ushort)((ReadByte(HIGH_BYTE, VENDOR_ID_REGISTER) << 8) |

   161            ReadByte(0, VENDOR_ID_REGISTER));

   162       return vendorId == WINBOND_VENDOR_ID;

   163     }

   165     private static ulong SetBit(ulong target, int bit, int value) {

   166       if ((value & 1) != value)

   167         throw new ArgumentException("Value must be one bit only.");

   169       if (bit < 0 || bit > 63)

   170         throw new ArgumentException("Bit out of range.");

   172       ulong mask = (((ulong)1) << bit);

   173       return value > 0 ? target | mask : target & ~mask;

   174     }

   176     public Chip Chip { get { return chip; } }

   177     public float?[] Voltages { get { return voltages; } }

   178     public float?[] Temperatures { get { return temperatures; } }

   179     public float?[] Fans { get { return fans; } }

   180     public float?[] Controls { get { return controls; } }

   182     public void Update() {

   183       if (!Ring0.WaitIsaBusMutex(10))

   184         return;

   186       for (int i = 0; i < voltages.Length; i++) {

   187         if (voltageRegister[i] != VOLTAGE_VBAT_REG) {

   188           // two special VCore measurement modes for W83627THF

   189           float fvalue;

   190           if ((chip == Chip.W83627HF || chip == Chip.W83627THF ||

   191             chip == Chip.W83687THF) && i == 0)

   192           {

   193             byte vrmConfiguration = ReadByte(0, 0x18);

   194             int value = ReadByte(voltageBank[i], voltageRegister[i]);

   195             if ((vrmConfiguration & 0x01) == 0)

   196               fvalue = 0.016f * value; // VRM8 formula

   197             else

   198               fvalue = 0.00488f * value + 0.69f; // VRM9 formula

   199           } else {

   200             int value = ReadByte(voltageBank[i], voltageRegister[i]);

   201             fvalue = voltageGain * value;

   202           }

   203           if (fvalue > 0)

   204             voltages[i] = fvalue;

   205           else

   206             voltages[i] = null;

   207         } else {

   208           // Battery voltage

   209           bool valid = (ReadByte(0, 0x5D) & 0x01) > 0;

   210           if (valid) {

   211             voltages[i] = voltageGain * ReadByte(5, VOLTAGE_VBAT_REG);

   212           } else {

   213             voltages[i] = null;

   214           }

   215         }

   216       }

   218       for (int i = 0; i < temperatures.Length; i++) {

   219         int value = ((sbyte)ReadByte(TEMPERATURE_BANK[i],

   220           TEMPERATURE_REG[i])) << 1;

   221         if (TEMPERATURE_BANK[i] > 0)

   222           value |= ReadByte(TEMPERATURE_BANK[i],

   223             (byte)(TEMPERATURE_REG[i] + 1)) >> 7;

   225         float temperature = value / 2.0f;

   226         if (temperature <= 125 && temperature >= -55 && !peciTemperature[i]) {

   227           temperatures[i] = temperature;

   228         } else {

   229           temperatures[i] = null;

   230         }

   231       }

   233       ulong bits = 0;

   234       for (int i = 0; i < FAN_BIT_REG.Length; i++)

   235         bits = (bits << 8) | ReadByte(0, FAN_BIT_REG[i]);

   236       ulong newBits = bits;

   237       for (int i = 0; i < fans.Length; i++) {

   238         int count = ReadByte(FAN_TACHO_BANK[i], FAN_TACHO_REG[i]);

   240         // assemble fan divisor

   241         int divisorBits = (int)(

   242           (((bits >> FAN_DIV_BIT2[i]) & 1) << 2) |

   243           (((bits >> FAN_DIV_BIT1[i]) & 1) << 1) |

   244            ((bits >> FAN_DIV_BIT0[i]) & 1));

   245         int divisor = 1 << divisorBits;

   247         float value = (count < 0xff) ? 1.35e6f / (count * divisor) : 0;

   248         fans[i] = value;

   250         // update fan divisor

   251         if (count > 192 && divisorBits < 7)

   252           divisorBits++;

   253         if (count < 96 && divisorBits > 0)

   254           divisorBits--;

   256         newBits = SetBit(newBits, FAN_DIV_BIT2[i], (divisorBits >> 2) & 1);

   257         newBits = SetBit(newBits, FAN_DIV_BIT1[i], (divisorBits >> 1) & 1);

   258         newBits = SetBit(newBits, FAN_DIV_BIT0[i], divisorBits & 1);

   259       }

   261       // write new fan divisors

   262       for (int i = FAN_BIT_REG.Length - 1; i >= 0; i--) {

   263         byte oldByte = (byte)(bits & 0xFF);

   264         byte newByte = (byte)(newBits & 0xFF);

   265         bits = bits >> 8;

   266         newBits = newBits >> 8;

   267         if (oldByte != newByte)

   268           WriteByte(0, FAN_BIT_REG[i], newByte);

   269       }

   271       Ring0.ReleaseIsaBusMutex();

   272     }

   274     public string GetReport() {

   275       StringBuilder r = new StringBuilder();

   277       r.AppendLine("LPC " + this.GetType().Name);

   278       r.AppendLine();

   279       r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));

   280       r.Append("Chip revision: 0x");

   281       r.AppendLine(revision.ToString("X", CultureInfo.InvariantCulture));

   282       r.Append("Base Adress: 0x");

   283       r.AppendLine(address.ToString("X4", CultureInfo.InvariantCulture));

   284       r.AppendLine();

   286       if (!Ring0.WaitIsaBusMutex(100))

   287         return r.ToString();

   289       r.AppendLine("Hardware Monitor Registers");

   290       r.AppendLine();

   291       r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");

   292       r.AppendLine();

   293       for (int i = 0; i <= 0x7; i++) {

   294         r.Append(" ");

   295         r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture));

   296         r.Append("  ");

   297         for (int j = 0; j <= 0xF; j++) {

   298           r.Append(" ");

   299           r.Append(ReadByte(0, (byte)((i << 4) | j)).ToString(

   300             "X2", CultureInfo.InvariantCulture));

   301         }

   302         r.AppendLine();

   303       }

   304       for (int k = 1; k <= 15; k++) {

   305         r.AppendLine("Bank " + k);

   306         for (int i = 0x5; i < 0x6; i++) {

   307           r.Append(" ");

   308           r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture));

   309           r.Append("  ");

   310           for (int j = 0; j <= 0xF; j++) {

   311             r.Append(" ");

   312             r.Append(ReadByte((byte)(k), (byte)((i << 4) | j)).ToString(

   313               "X2", CultureInfo.InvariantCulture));

   314           }

   315           r.AppendLine();

   316         }

   317       }

   318       r.AppendLine();

   320       Ring0.ReleaseIsaBusMutex();

   322       return r.ToString();

   323     }

   324   }

   325 }

author	sl
	Thu, 01 Jan 2015 23:35:49 +0100
changeset 405	5715aefd2bcc
parent 323	3f2d9ebacf38
permissions	-rw-r--r--