Hardware/LPC/W836XX.cs
author moel.mich
Thu, 12 Aug 2010 20:53:27 +0000
changeset 166 fa9dfbfc4145
parent 165 813d8bc3192f
child 167 b7cc9d09aefe
permissions -rw-r--r--
Changed the project files to Visual Studio 2010. Fixed some Code Analysis warnings.
     1 /*
     2   
     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1
     4 
     5   The contents of this file are subject to the Mozilla Public License Version
     6   1.1 (the "License"); you may not use this file except in compliance with
     7   the License. You may obtain a copy of the License at
     8  
     9   http://www.mozilla.org/MPL/
    10 
    11   Software distributed under the License is distributed on an "AS IS" basis,
    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
    13   for the specific language governing rights and limitations under the License.
    14 
    15   The Original Code is the Open Hardware Monitor code.
    16 
    17   The Initial Developer of the Original Code is 
    18   Michael Möller <m.moeller@gmx.ch>.
    19   Portions created by the Initial Developer are Copyright (C) 2009-2010
    20   the Initial Developer. All Rights Reserved.
    21 
    22   Contributor(s):
    23 
    24   Alternatively, the contents of this file may be used under the terms of
    25   either the GNU General Public License Version 2 or later (the "GPL"), or
    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
    27   in which case the provisions of the GPL or the LGPL are applicable instead
    28   of those above. If you wish to allow use of your version of this file only
    29   under the terms of either the GPL or the LGPL, and not to allow others to
    30   use your version of this file under the terms of the MPL, indicate your
    31   decision by deleting the provisions above and replace them with the notice
    32   and other provisions required by the GPL or the LGPL. If you do not delete
    33   the provisions above, a recipient may use your version of this file under
    34   the terms of any one of the MPL, the GPL or the LGPL.
    35  
    36 */
    37 
    38 using System;
    39 using System.Collections.Generic;
    40 using System.Globalization;
    41 using System.Text;
    42 
    43 namespace OpenHardwareMonitor.Hardware.LPC {
    44   internal class W836XX : ISuperIO {
    45 
    46     private ushort address;
    47     private byte revision;
    48 
    49     private Chip chip;
    50 
    51     private float?[] voltages = new float?[0];
    52     private float?[] temperatures = new float?[0];    
    53     private float?[] fans = new float?[0];
    54 
    55     private bool[] peciTemperature = new bool[0];
    56     private byte[] voltageRegister = new byte[0];
    57     private byte[] voltageBank = new byte[0];
    58     private float voltageGain = 0.008f;
    59 
    60     // Consts 
    61     private const ushort WINBOND_VENDOR_ID = 0x5CA3;
    62     private const byte HIGH_BYTE = 0x80;
    63 
    64     // Hardware Monitor
    65     private const byte ADDRESS_REGISTER_OFFSET = 0x05;
    66     private const byte DATA_REGISTER_OFFSET = 0x06;
    67 
    68     // Hardware Monitor Registers
    69     private const byte VOLTAGE_VBAT_REG = 0x51;
    70     private const byte BANK_SELECT_REGISTER = 0x4E;
    71     private const byte VENDOR_ID_REGISTER = 0x4F;
    72     private const byte TEMPERATURE_SOURCE_SELECT_REG = 0x49;
    73 
    74     private byte[] TEMPERATURE_REG = new byte[] { 0x50, 0x50, 0x27 };
    75     private byte[] TEMPERATURE_BANK = new byte[] { 1, 2, 0 };
    76 
    77     private byte[] FAN_TACHO_REG = new byte[] { 0x28, 0x29, 0x2A, 0x3F, 0x53 };
    78     private byte[] FAN_TACHO_BANK = new byte[] { 0, 0, 0, 0, 5 };       
    79     private byte[] FAN_BIT_REG = new byte[] { 0x47, 0x4B, 0x4C, 0x59, 0x5D };
    80     private byte[] FAN_DIV_BIT0 = new byte[] { 36, 38, 30, 8, 10 };
    81     private byte[] FAN_DIV_BIT1 = new byte[] { 37, 39, 31, 9, 11 };
    82     private byte[] FAN_DIV_BIT2 = new byte[] { 5, 6, 7, 23, 15 };
    83 
    84     private byte ReadByte(byte bank, byte register) {
    85       WinRing0.WriteIoPortByte(
    86          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);
    87       WinRing0.WriteIoPortByte(
    88          (ushort)(address + DATA_REGISTER_OFFSET), bank);
    89       WinRing0.WriteIoPortByte(
    90          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
    91       return WinRing0.ReadIoPortByte(
    92         (ushort)(address + DATA_REGISTER_OFFSET));
    93     } 
    94 
    95     private void WriteByte(byte bank, byte register, byte value) {
    96       WinRing0.WriteIoPortByte(
    97          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);
    98       WinRing0.WriteIoPortByte(
    99          (ushort)(address + DATA_REGISTER_OFFSET), bank);
   100       WinRing0.WriteIoPortByte(
   101          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
   102       WinRing0.WriteIoPortByte(
   103          (ushort)(address + DATA_REGISTER_OFFSET), value); 
   104     }
   105    
   106     public W836XX(Chip chip, byte revision, ushort address) {
   107       this.address = address;
   108       this.revision = revision;
   109       this.chip = chip;
   110 
   111       if (!IsWinbondVendor())
   112         return;
   113       
   114       temperatures = new float?[3];
   115       peciTemperature = new bool[3];
   116       switch (chip) {
   117         case Chip.W83667HG:
   118         case Chip.W83667HGB:
   119           // note temperature sensor registers that read PECI
   120           byte flag = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);
   121           peciTemperature[0] = (flag & 0x04) != 0;
   122           peciTemperature[1] = (flag & 0x40) != 0;
   123           peciTemperature[2] = false;
   124           break;
   125         case Chip.W83627DHG:        
   126         case Chip.W83627DHGP:
   127           // note temperature sensor registers that read PECI
   128           byte sel = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);
   129           peciTemperature[0] = (sel & 0x07) != 0;
   130           peciTemperature[1] = (sel & 0x70) != 0;
   131           peciTemperature[2] = false;
   132           break;
   133         default:
   134           // no PECI support
   135           peciTemperature[0] = false;
   136           peciTemperature[1] = false;
   137           peciTemperature[2] = false;
   138           break;
   139       }
   140 
   141       switch (chip) {
   142         case Chip.W83627EHF:
   143           voltages = new float?[10];
   144           voltageRegister = new byte[] { 
   145             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51, 0x52 };
   146           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5, 5 };
   147           voltageGain = 0.008f;
   148           fans = new float?[5];
   149           break;
   150         case Chip.W83627DHG:
   151         case Chip.W83627DHGP:        
   152         case Chip.W83667HG:
   153         case Chip.W83667HGB:
   154           voltages = new float?[9];
   155           voltageRegister = new byte[] { 
   156             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51 };
   157           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5 };
   158           voltageGain = 0.008f;
   159           fans = new float?[5];
   160           break;
   161         case Chip.W83627HF:
   162         case Chip.W83627THF:
   163         case Chip.W83687THF:
   164           voltages = new float?[7];
   165           voltageRegister = new byte[] { 
   166             0x20, 0x21, 0x22, 0x23, 0x24, 0x50, 0x51 };
   167           voltageBank = new byte[] { 0, 0, 0, 0, 0, 5, 5 };
   168           voltageGain = 0.016f;
   169           fans = new float?[3];         
   170           break;
   171       }
   172     }    
   173 
   174     private bool IsWinbondVendor() {
   175       ushort vendorId =
   176         (ushort)((ReadByte(HIGH_BYTE, VENDOR_ID_REGISTER) << 8) |
   177            ReadByte(0, VENDOR_ID_REGISTER));
   178       return vendorId == WINBOND_VENDOR_ID;
   179     }
   180 
   181     private ulong SetBit(ulong target, int bit, int value) {
   182       if ((value & 1) != value)
   183         throw new ArgumentException("Value must be one bit only.");
   184 
   185       if (bit < 0 || bit > 63)
   186         throw new ArgumentException("Bit out of range.");
   187 
   188       ulong mask = (((ulong)1) << bit);
   189       return value > 0 ? target | mask : target & ~mask;
   190     }
   191 
   192     public Chip Chip { get { return chip; } }
   193     public float?[] Voltages { get { return voltages; } }
   194     public float?[] Temperatures { get { return temperatures; } }
   195     public float?[] Fans { get { return fans; } }
   196 
   197     public void Update() {
   198       if (!WinRing0.WaitIsaBusMutex(10))
   199         return;
   200 
   201       for (int i = 0; i < voltages.Length; i++) {
   202         if (voltageRegister[i] != VOLTAGE_VBAT_REG) {
   203           // two special VCore measurement modes for W83627THF
   204           float fvalue;
   205           if ((chip == Chip.W83627HF || chip == Chip.W83627THF || 
   206             chip == Chip.W83687THF) && i == 0) 
   207           {
   208             byte vrmConfiguration = ReadByte(0, 0x18);
   209             int value = ReadByte(voltageBank[i], voltageRegister[i]);
   210             if ((vrmConfiguration & 0x01) == 0)
   211               fvalue = 0.016f * value; // VRM8 formula
   212             else
   213               fvalue = 0.00488f * value + 0.69f; // VRM9 formula
   214           } else {
   215             int value = ReadByte(voltageBank[i], voltageRegister[i]);
   216             fvalue = voltageGain * value;
   217           }
   218           if (fvalue > 0)
   219             voltages[i] = fvalue;
   220           else
   221             voltages[i] = null;
   222         } else {
   223           // Battery voltage
   224           bool valid = (ReadByte(0, 0x5D) & 0x01) > 0;
   225           if (valid) {
   226             voltages[i] = voltageGain * ReadByte(5, VOLTAGE_VBAT_REG);
   227           } else {
   228             voltages[i] = null;
   229           }
   230         }
   231       }
   232 
   233       for (int i = 0; i < temperatures.Length; i++) {
   234         int value = ((sbyte)ReadByte(TEMPERATURE_BANK[i], 
   235           TEMPERATURE_REG[i])) << 1;
   236         if (TEMPERATURE_BANK[i] > 0) 
   237           value |= ReadByte(TEMPERATURE_BANK[i],
   238             (byte)(TEMPERATURE_REG[i] + 1)) >> 7;
   239 
   240         float temperature = value / 2.0f;
   241         if (temperature <= 125 && temperature >= -55 && !peciTemperature[i]) {
   242           temperatures[i] = temperature;
   243         } else {
   244           temperatures[i] = null;
   245         }
   246       }
   247 
   248       ulong bits = 0;
   249       for (int i = 0; i < FAN_BIT_REG.Length; i++)
   250         bits = (bits << 8) | ReadByte(0, FAN_BIT_REG[i]);
   251       ulong newBits = bits;
   252       for (int i = 0; i < fans.Length; i++) {
   253         int count = ReadByte(FAN_TACHO_BANK[i], FAN_TACHO_REG[i]);
   254         
   255         // assemble fan divisor
   256         int divisorBits = (int)(
   257           (((bits >> FAN_DIV_BIT2[i]) & 1) << 2) |
   258           (((bits >> FAN_DIV_BIT1[i]) & 1) << 1) |
   259            ((bits >> FAN_DIV_BIT0[i]) & 1));
   260         int divisor = 1 << divisorBits;
   261        
   262         float value = (count < 0xff) ? 1.35e6f / (count * divisor) : 0;
   263         fans[i] = value;
   264 
   265         // update fan divisor
   266         if (count > 192 && divisorBits < 7) 
   267           divisorBits++;
   268         if (count < 96 && divisorBits > 0)
   269           divisorBits--;
   270 
   271         newBits = SetBit(newBits, FAN_DIV_BIT2[i], (divisorBits >> 2) & 1);
   272         newBits = SetBit(newBits, FAN_DIV_BIT1[i], (divisorBits >> 1) & 1);
   273         newBits = SetBit(newBits, FAN_DIV_BIT0[i], divisorBits & 1);
   274       }
   275      
   276       // write new fan divisors 
   277       for (int i = FAN_BIT_REG.Length - 1; i >= 0; i--) {
   278         byte oldByte = (byte)(bits & 0xFF);
   279         byte newByte = (byte)(newBits & 0xFF);
   280         bits = bits >> 8;
   281         newBits = newBits >> 8;
   282         if (oldByte != newByte) 
   283           WriteByte(0, FAN_BIT_REG[i], newByte);        
   284       }
   285 
   286       WinRing0.ReleaseIsaBusMutex();
   287     }
   288 
   289     public string GetReport() {
   290       StringBuilder r = new StringBuilder();
   291 
   292       r.AppendLine("LPC " + this.GetType().Name);
   293       r.AppendLine();
   294       r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
   295       r.Append("Chip revision: 0x");
   296       r.AppendLine(revision.ToString("X", CultureInfo.InvariantCulture));
   297       r.Append("Base Adress: 0x");
   298       r.AppendLine(address.ToString("X4", CultureInfo.InvariantCulture));
   299       r.AppendLine();
   300 
   301       if (!WinRing0.WaitIsaBusMutex(100))
   302         return r.ToString();
   303 
   304       r.AppendLine("Hardware Monitor Registers");
   305       r.AppendLine();
   306       r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
   307       r.AppendLine();
   308       for (int i = 0; i <= 0x7; i++) {
   309         r.Append(" ");
   310         r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture)); 
   311         r.Append("  ");
   312         for (int j = 0; j <= 0xF; j++) {
   313           r.Append(" ");
   314           r.Append(ReadByte(0, (byte)((i << 4) | j)).ToString(
   315             "X2", CultureInfo.InvariantCulture));
   316         }
   317         r.AppendLine();
   318       }
   319       for (int k = 1; k <= 15; k++) {
   320         r.AppendLine("Bank " + k);
   321         for (int i = 0x5; i < 0x6; i++) {
   322           r.Append(" "); 
   323           r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture)); 
   324           r.Append("  ");
   325           for (int j = 0; j <= 0xF; j++) {
   326             r.Append(" ");
   327             r.Append(ReadByte((byte)(k), (byte)((i << 4) | j)).ToString(
   328               "X2", CultureInfo.InvariantCulture));
   329           }
   330           r.AppendLine();
   331         }
   332       }
   333       r.AppendLine();
   334 
   335       WinRing0.ReleaseIsaBusMutex();
   336 
   337       return r.ToString();
   338     }
   339   } 
   340 }