diff -r 000000000000 -r bde4ae8d615e os/persistentdata/persistentstorage/sqlite3api/TEST/TCL/tcldistribution/unix/tclUnixChan.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/os/persistentdata/persistentstorage/sqlite3api/TEST/TCL/tcldistribution/unix/tclUnixChan.c Fri Jun 15 03:10:57 2012 +0200 @@ -0,0 +1,3366 @@ +/* + * tclUnixChan.c + * + * Common channel driver for Unix channels based on files, command + * pipes and TCP sockets. + * + * Copyright (c) 1995-1997 Sun Microsystems, Inc. + * Copyright (c) 1998-1999 by Scriptics Corporation. + * Portions Copyright (c) 2007-2008 Nokia Corporation and/or its subsidiaries. All rights reserved. + * + * See the file "license.terms" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * + * RCS: @(#) $Id: tclUnixChan.c,v 1.42.2.10 2006/11/28 16:29:48 kennykb Exp $ + */ + +#include "tclInt.h" /* Internal definitions for Tcl. */ +#include "tclPort.h" /* Portability features for Tcl. */ +#include "tclIO.h" /* To get Channel type declaration. */ + +/* + * sys/ioctl.h has already been included by tclPort.h. Including termios.h + * or termio.h causes a bunch of warning messages because some duplicate + * (but not contradictory) #defines exist in termios.h and/or termio.h + */ +#undef NL0 +#undef NL1 +#undef CR0 +#undef CR1 +#undef CR2 +#undef CR3 +#undef TAB0 +#undef TAB1 +#undef TAB2 +#undef XTABS +#undef BS0 +#undef BS1 +#undef FF0 +#undef FF1 +#undef ECHO +#undef NOFLSH +#undef TOSTOP +#undef FLUSHO +#undef PENDIN + +#define SUPPORTS_TTY + +#ifdef USE_TERMIOS +# include +# ifdef HAVE_SYS_IOCTL_H +# include +# endif /* HAVE_SYS_IOCTL_H */ +# ifdef HAVE_SYS_MODEM_H +# include +# endif /* HAVE_SYS_MODEM_H */ +# define IOSTATE struct termios +# define GETIOSTATE(fd, statePtr) tcgetattr((fd), (statePtr)) +# define SETIOSTATE(fd, statePtr) tcsetattr((fd), TCSADRAIN, (statePtr)) +# define GETCONTROL(fd, intPtr) ioctl((fd), TIOCMGET, (intPtr)) +# define SETCONTROL(fd, intPtr) ioctl((fd), TIOCMSET, (intPtr)) + /* + * TIP #35 introduced a different on exit flush/close behavior that + * doesn't work correctly with standard channels on all systems. + * The problem is tcflush throws away waiting channel data. This may + * be necessary for true serial channels that may block, but isn't + * correct in the standard case. This might be replaced with tcdrain + * instead, but that can block. For now, we revert to making this do + * nothing, and TtyOutputProc being the same old FileOutputProc. + * -- hobbs [Bug #525783] + */ +# define BAD_TIP35_FLUSH 0 +# if BAD_TIP35_FLUSH +# define TTYFLUSH(fd) tcflush((fd), TCIOFLUSH); +# else +# define TTYFLUSH(fd) +# endif /* BAD_TIP35_FLUSH */ +# ifdef FIONREAD +# define GETREADQUEUE(fd, int) ioctl((fd), FIONREAD, &(int)) +# elif defined(FIORDCHK) +# define GETREADQUEUE(fd, int) int = ioctl((fd), FIORDCHK, NULL) +# endif /* FIONREAD */ +# ifdef TIOCOUTQ +# define GETWRITEQUEUE(fd, int) ioctl((fd), TIOCOUTQ, &(int)) +# endif /* TIOCOUTQ */ +# if defined(TIOCSBRK) && defined(TIOCCBRK) +/* + * Can't use ?: operator below because that messes up types on either + * Linux or Solaris (the two are mutually exclusive!) + */ +# define SETBREAK(fd, flag) \ + if (flag) { \ + ioctl((fd), TIOCSBRK, NULL); \ + } else { \ + ioctl((fd), TIOCCBRK, NULL); \ + } +# endif /* TIOCSBRK&TIOCCBRK */ +# if !defined(CRTSCTS) && defined(CNEW_RTSCTS) +# define CRTSCTS CNEW_RTSCTS +# endif /* !CRTSCTS&CNEW_RTSCTS */ +#else /* !USE_TERMIOS */ + +#ifdef USE_TERMIO +# include +# define IOSTATE struct termio +# define GETIOSTATE(fd, statePtr) ioctl((fd), TCGETA, (statePtr)) +# define SETIOSTATE(fd, statePtr) ioctl((fd), TCSETAW, (statePtr)) +#else /* !USE_TERMIO */ + +#ifdef USE_SGTTY +# include +# define IOSTATE struct sgttyb +# define GETIOSTATE(fd, statePtr) ioctl((fd), TIOCGETP, (statePtr)) +# define SETIOSTATE(fd, statePtr) ioctl((fd), TIOCSETP, (statePtr)) +#else /* !USE_SGTTY */ +# undef SUPPORTS_TTY +#endif /* !USE_SGTTY */ + +#endif /* !USE_TERMIO */ +#endif /* !USE_TERMIOS */ + +/* + * This structure describes per-instance state of a file based channel. + */ + +typedef struct FileState { + Tcl_Channel channel; /* Channel associated with this file. */ + int fd; /* File handle. */ + int validMask; /* OR'ed combination of TCL_READABLE, + * TCL_WRITABLE, or TCL_EXCEPTION: indicates + * which operations are valid on the file. */ +#ifdef DEPRECATED + struct FileState *nextPtr; /* Pointer to next file in list of all + * file channels. */ +#endif /* DEPRECATED */ +} FileState; + +#ifdef SUPPORTS_TTY + +/* + * The following structure describes per-instance state of a tty-based + * channel. + */ + +typedef struct TtyState { + FileState fs; /* Per-instance state of the file + * descriptor. Must be the first field. */ + int stateUpdated; /* Flag to say if the state has been + * modified and needs resetting. */ + IOSTATE savedState; /* Initial state of device. Used to reset + * state when device closed. */ +} TtyState; + +/* + * The following structure is used to set or get the serial port + * attributes in a platform-independant manner. + */ + +typedef struct TtyAttrs { + int baud; + int parity; + int data; + int stop; +} TtyAttrs; + +#endif /* !SUPPORTS_TTY */ + +#define UNSUPPORTED_OPTION(detail) \ + if (interp) { \ + Tcl_AppendResult(interp, (detail), \ + " not supported for this platform", (char *) NULL); \ + } + +#ifdef DEPRECATED +typedef struct ThreadSpecificData { + /* + * List of all file channels currently open. This is per thread and is + * used to match up fd's to channels, which rarely occurs. + */ + + FileState *firstFilePtr; +} ThreadSpecificData; + +static Tcl_ThreadDataKey dataKey; +#endif /* DEPRECATED */ + +/* + * This structure describes per-instance state of a tcp based channel. + */ + +typedef struct TcpState { + Tcl_Channel channel; /* Channel associated with this file. */ + int fd; /* The socket itself. */ + int flags; /* ORed combination of the bitfields + * defined below. */ + Tcl_TcpAcceptProc *acceptProc; + /* Proc to call on accept. */ + ClientData acceptProcData; /* The data for the accept proc. */ +} TcpState; + +/* + * These bits may be ORed together into the "flags" field of a TcpState + * structure. + */ + +#define TCP_ASYNC_SOCKET (1<<0) /* Asynchronous socket. */ +#define TCP_ASYNC_CONNECT (1<<1) /* Async connect in progress. */ + +/* + * The following defines the maximum length of the listen queue. This is + * the number of outstanding yet-to-be-serviced requests for a connection + * on a server socket, more than this number of outstanding requests and + * the connection request will fail. + */ + +#ifndef SOMAXCONN +# define SOMAXCONN 100 +#endif /* SOMAXCONN */ + +#if (SOMAXCONN < 100) +# undef SOMAXCONN +# define SOMAXCONN 100 +#endif /* SOMAXCONN < 100 */ + +/* + * The following defines how much buffer space the kernel should maintain + * for a socket. + */ + +#define SOCKET_BUFSIZE 4096 + +/* + * Static routines for this file: + */ + +static TcpState * CreateSocket _ANSI_ARGS_((Tcl_Interp *interp, + int port, CONST char *host, int server, + CONST char *myaddr, int myport, int async)); +static int CreateSocketAddress _ANSI_ARGS_( + (struct sockaddr_in *sockaddrPtr, + CONST char *host, int port)); +static int FileBlockModeProc _ANSI_ARGS_(( + ClientData instanceData, int mode)); +static int FileCloseProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp)); +static int FileGetHandleProc _ANSI_ARGS_((ClientData instanceData, + int direction, ClientData *handlePtr)); +static int FileInputProc _ANSI_ARGS_((ClientData instanceData, + char *buf, int toRead, int *errorCode)); +static int FileOutputProc _ANSI_ARGS_(( + ClientData instanceData, CONST char *buf, + int toWrite, int *errorCode)); +static int FileSeekProc _ANSI_ARGS_((ClientData instanceData, + long offset, int mode, int *errorCode)); +#ifdef DEPRECATED +static void FileThreadActionProc _ANSI_ARGS_ (( + ClientData instanceData, int action)); +#endif +static Tcl_WideInt FileWideSeekProc _ANSI_ARGS_((ClientData instanceData, + Tcl_WideInt offset, int mode, int *errorCode)); +static void FileWatchProc _ANSI_ARGS_((ClientData instanceData, + int mask)); +static void TcpAccept _ANSI_ARGS_((ClientData data, int mask)); +static int TcpBlockModeProc _ANSI_ARGS_((ClientData data, + int mode)); +static int TcpCloseProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp)); +static int TcpGetHandleProc _ANSI_ARGS_((ClientData instanceData, + int direction, ClientData *handlePtr)); +static int TcpGetOptionProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp, CONST char *optionName, + Tcl_DString *dsPtr)); +static int TcpInputProc _ANSI_ARGS_((ClientData instanceData, + char *buf, int toRead, int *errorCode)); +static int TcpOutputProc _ANSI_ARGS_((ClientData instanceData, + CONST char *buf, int toWrite, int *errorCode)); +static void TcpWatchProc _ANSI_ARGS_((ClientData instanceData, + int mask)); +#ifdef SUPPORTS_TTY +static int TtyCloseProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp)); +static void TtyGetAttributes _ANSI_ARGS_((int fd, + TtyAttrs *ttyPtr)); +static int TtyGetOptionProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp, CONST char *optionName, + Tcl_DString *dsPtr)); +static FileState * TtyInit _ANSI_ARGS_((int fd, int initialize)); +#if BAD_TIP35_FLUSH +static int TtyOutputProc _ANSI_ARGS_((ClientData instanceData, + CONST char *buf, int toWrite, int *errorCode)); +#endif /* BAD_TIP35_FLUSH */ +static int TtyParseMode _ANSI_ARGS_((Tcl_Interp *interp, + CONST char *mode, int *speedPtr, int *parityPtr, + int *dataPtr, int *stopPtr)); +static void TtySetAttributes _ANSI_ARGS_((int fd, + TtyAttrs *ttyPtr)); +static int TtySetOptionProc _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp, CONST char *optionName, + CONST char *value)); +#endif /* SUPPORTS_TTY */ +static int WaitForConnect _ANSI_ARGS_((TcpState *statePtr, + int *errorCodePtr)); +static Tcl_Channel MakeTcpClientChannelMode _ANSI_ARGS_( + (ClientData tcpSocket, + int mode)); + + +/* + * This structure describes the channel type structure for file based IO: + */ + +static Tcl_ChannelType fileChannelType = { + "file", /* Type name. */ + TCL_CHANNEL_VERSION_4, /* v4 channel */ + FileCloseProc, /* Close proc. */ + FileInputProc, /* Input proc. */ + FileOutputProc, /* Output proc. */ + FileSeekProc, /* Seek proc. */ + NULL, /* Set option proc. */ + NULL, /* Get option proc. */ + FileWatchProc, /* Initialize notifier. */ + FileGetHandleProc, /* Get OS handles out of channel. */ + NULL, /* close2proc. */ + FileBlockModeProc, /* Set blocking or non-blocking mode.*/ + NULL, /* flush proc. */ + NULL, /* handler proc. */ + FileWideSeekProc, /* wide seek proc. */ +#ifdef DEPRECATED + FileThreadActionProc, /* thread actions */ +#else + NULL, +#endif +}; + +#ifdef SUPPORTS_TTY +/* + * This structure describes the channel type structure for serial IO. + * Note that this type is a subclass of the "file" type. + */ + +static Tcl_ChannelType ttyChannelType = { + "tty", /* Type name. */ + TCL_CHANNEL_VERSION_4, /* v4 channel */ + TtyCloseProc, /* Close proc. */ + FileInputProc, /* Input proc. */ +#if BAD_TIP35_FLUSH + TtyOutputProc, /* Output proc. */ +#else /* !BAD_TIP35_FLUSH */ + FileOutputProc, /* Output proc. */ +#endif /* BAD_TIP35_FLUSH */ + NULL, /* Seek proc. */ + TtySetOptionProc, /* Set option proc. */ + TtyGetOptionProc, /* Get option proc. */ + FileWatchProc, /* Initialize notifier. */ + FileGetHandleProc, /* Get OS handles out of channel. */ + NULL, /* close2proc. */ + FileBlockModeProc, /* Set blocking or non-blocking mode.*/ + NULL, /* flush proc. */ + NULL, /* handler proc. */ + NULL, /* wide seek proc. */ + NULL, /* thread action proc. */ +}; +#endif /* SUPPORTS_TTY */ + +/* + * This structure describes the channel type structure for TCP socket + * based IO: + */ + +static Tcl_ChannelType tcpChannelType = { + "tcp", /* Type name. */ + TCL_CHANNEL_VERSION_4, /* v4 channel */ + TcpCloseProc, /* Close proc. */ + TcpInputProc, /* Input proc. */ + TcpOutputProc, /* Output proc. */ + NULL, /* Seek proc. */ + NULL, /* Set option proc. */ + TcpGetOptionProc, /* Get option proc. */ + TcpWatchProc, /* Initialize notifier. */ + TcpGetHandleProc, /* Get OS handles out of channel. */ + NULL, /* close2proc. */ + TcpBlockModeProc, /* Set blocking or non-blocking mode.*/ + NULL, /* flush proc. */ + NULL, /* handler proc. */ + NULL, /* wide seek proc. */ + NULL, /* thread action proc. */ +}; + + +/* + *---------------------------------------------------------------------- + * + * FileBlockModeProc -- + * + * Helper procedure to set blocking and nonblocking modes on a + * file based channel. Invoked by generic IO level code. + * + * Results: + * 0 if successful, errno when failed. + * + * Side effects: + * Sets the device into blocking or non-blocking mode. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static int +FileBlockModeProc(instanceData, mode) + ClientData instanceData; /* File state. */ + int mode; /* The mode to set. Can be one of + * TCL_MODE_BLOCKING or + * TCL_MODE_NONBLOCKING. */ +{ + FileState *fsPtr = (FileState *) instanceData; + int curStatus; + +#ifndef USE_FIONBIO + curStatus = fcntl(fsPtr->fd, F_GETFL); + if (mode == TCL_MODE_BLOCKING) { + curStatus &= (~(O_NONBLOCK)); + } else { + curStatus |= O_NONBLOCK; + } + if (fcntl(fsPtr->fd, F_SETFL, curStatus) < 0) { + return errno; + } + curStatus = fcntl(fsPtr->fd, F_GETFL); +#else /* USE_FIONBIO */ + if (mode == TCL_MODE_BLOCKING) { + curStatus = 0; + } else { + curStatus = 1; + } + if (ioctl(fsPtr->fd, (int) FIONBIO, &curStatus) < 0) { + return errno; + } +#endif /* !USE_FIONBIO */ + return 0; +} + +/* + *---------------------------------------------------------------------- + * + * FileInputProc -- + * + * This procedure is invoked from the generic IO level to read + * input from a file based channel. + * + * Results: + * The number of bytes read is returned or -1 on error. An output + * argument contains a POSIX error code if an error occurs, or zero. + * + * Side effects: + * Reads input from the input device of the channel. + * + *---------------------------------------------------------------------- + */ + +static int +FileInputProc(instanceData, buf, toRead, errorCodePtr) + ClientData instanceData; /* File state. */ + char *buf; /* Where to store data read. */ + int toRead; /* How much space is available + * in the buffer? */ + int *errorCodePtr; /* Where to store error code. */ +{ + FileState *fsPtr = (FileState *) instanceData; + int bytesRead; /* How many bytes were actually + * read from the input device? */ + + *errorCodePtr = 0; + + /* + * Assume there is always enough input available. This will block + * appropriately, and read will unblock as soon as a short read is + * possible, if the channel is in blocking mode. If the channel is + * nonblocking, the read will never block. + */ + + bytesRead = read(fsPtr->fd, buf, (size_t) toRead); + if (bytesRead > -1) { + return bytesRead; + } + *errorCodePtr = errno; + return -1; +} + +/* + *---------------------------------------------------------------------- + * + * FileOutputProc-- + * + * This procedure is invoked from the generic IO level to write + * output to a file channel. + * + * Results: + * The number of bytes written is returned or -1 on error. An + * output argument contains a POSIX error code if an error occurred, + * or zero. + * + * Side effects: + * Writes output on the output device of the channel. + * + *---------------------------------------------------------------------- + */ + +static int +FileOutputProc(instanceData, buf, toWrite, errorCodePtr) + ClientData instanceData; /* File state. */ + CONST char *buf; /* The data buffer. */ + int toWrite; /* How many bytes to write? */ + int *errorCodePtr; /* Where to store error code. */ +{ + FileState *fsPtr = (FileState *) instanceData; + int written; + + *errorCodePtr = 0; + + if (toWrite == 0) { + /* + * SF Tcl Bug 465765. + * Do not try to write nothing into a file. STREAM based + * implementations will considers this as EOF (if there is a + * pipe behind the file). + */ + + return 0; + } + written = write(fsPtr->fd, buf, (size_t) toWrite); + if (written > -1) { + return written; + } + *errorCodePtr = errno; + return -1; +} + +/* + *---------------------------------------------------------------------- + * + * FileCloseProc -- + * + * This procedure is called from the generic IO level to perform + * channel-type-specific cleanup when a file based channel is closed. + * + * Results: + * 0 if successful, errno if failed. + * + * Side effects: + * Closes the device of the channel. + * + *---------------------------------------------------------------------- + */ + +static int +FileCloseProc(instanceData, interp) + ClientData instanceData; /* File state. */ + Tcl_Interp *interp; /* For error reporting - unused. */ +{ + FileState *fsPtr = (FileState *) instanceData; + int errorCode = 0; +#ifdef DEPRECATED + FileState **nextPtrPtr; + ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); +#endif /* DEPRECATED */ + Tcl_DeleteFileHandler(fsPtr->fd); + + /* + * Do not close standard channels while in thread-exit. + */ + + if (!TclInThreadExit() + || ((fsPtr->fd != 0) && (fsPtr->fd != 1) && (fsPtr->fd != 2))) { + if (close(fsPtr->fd) < 0) { + errorCode = errno; + } + } + ckfree((char *) fsPtr); + return errorCode; +} + +/* + *---------------------------------------------------------------------- + * + * FileSeekProc -- + * + * This procedure is called by the generic IO level to move the + * access point in a file based channel. + * + * Results: + * -1 if failed, the new position if successful. An output + * argument contains the POSIX error code if an error occurred, + * or zero. + * + * Side effects: + * Moves the location at which the channel will be accessed in + * future operations. + * + *---------------------------------------------------------------------- + */ + +static int +FileSeekProc(instanceData, offset, mode, errorCodePtr) + ClientData instanceData; /* File state. */ + long offset; /* Offset to seek to. */ + int mode; /* Relative to where should we seek? Can be + * one of SEEK_START, SEEK_SET or SEEK_END. */ + int *errorCodePtr; /* To store error code. */ +{ + FileState *fsPtr = (FileState *) instanceData; + Tcl_WideInt oldLoc, newLoc; + + /* + * Save our current place in case we need to roll-back the seek. + */ + oldLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) 0, SEEK_CUR); + if (oldLoc == Tcl_LongAsWide(-1)) { + /* + * Bad things are happening. Error out... + */ + *errorCodePtr = errno; + return -1; + } + + newLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) offset, mode); + + /* + * Check for expressability in our return type, and roll-back otherwise. + */ + if (newLoc > Tcl_LongAsWide(INT_MAX)) { + *errorCodePtr = EOVERFLOW; + TclOSseek(fsPtr->fd, (Tcl_SeekOffset) oldLoc, SEEK_SET); + return -1; + } else { + *errorCodePtr = (newLoc == Tcl_LongAsWide(-1)) ? errno : 0; + } + return (int) Tcl_WideAsLong(newLoc); +} + +/* + *---------------------------------------------------------------------- + * + * FileWideSeekProc -- + * + * This procedure is called by the generic IO level to move the + * access point in a file based channel, with offsets expressed + * as wide integers. + * + * Results: + * -1 if failed, the new position if successful. An output + * argument contains the POSIX error code if an error occurred, + * or zero. + * + * Side effects: + * Moves the location at which the channel will be accessed in + * future operations. + * + *---------------------------------------------------------------------- + */ + +static Tcl_WideInt +FileWideSeekProc(instanceData, offset, mode, errorCodePtr) + ClientData instanceData; /* File state. */ + Tcl_WideInt offset; /* Offset to seek to. */ + int mode; /* Relative to where should we seek? Can be + * one of SEEK_START, SEEK_CUR or SEEK_END. */ + int *errorCodePtr; /* To store error code. */ +{ + FileState *fsPtr = (FileState *) instanceData; + Tcl_WideInt newLoc; + + newLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) offset, mode); + + *errorCodePtr = (newLoc == -1) ? errno : 0; + return newLoc; +} + +/* + *---------------------------------------------------------------------- + * + * FileWatchProc -- + * + * Initialize the notifier to watch the fd from this channel. + * + * Results: + * None. + * + * Side effects: + * Sets up the notifier so that a future event on the channel will + * be seen by Tcl. + * + *---------------------------------------------------------------------- + */ + +static void +FileWatchProc(instanceData, mask) + ClientData instanceData; /* The file state. */ + int mask; /* Events of interest; an OR-ed + * combination of TCL_READABLE, + * TCL_WRITABLE and TCL_EXCEPTION. */ +{ + FileState *fsPtr = (FileState *) instanceData; + + /* + * Make sure we only register for events that are valid on this file. + * Note that we are passing Tcl_NotifyChannel directly to + * Tcl_CreateFileHandler with the channel pointer as the client data. + */ + + mask &= fsPtr->validMask; + if (mask) { + Tcl_CreateFileHandler(fsPtr->fd, mask, + (Tcl_FileProc *) Tcl_NotifyChannel, + (ClientData) fsPtr->channel); + } else { + Tcl_DeleteFileHandler(fsPtr->fd); + } +} + +/* + *---------------------------------------------------------------------- + * + * FileGetHandleProc -- + * + * Called from Tcl_GetChannelHandle to retrieve OS handles from + * a file based channel. + * + * Results: + * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if + * there is no handle for the specified direction. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static int +FileGetHandleProc(instanceData, direction, handlePtr) + ClientData instanceData; /* The file state. */ + int direction; /* TCL_READABLE or TCL_WRITABLE */ + ClientData *handlePtr; /* Where to store the handle. */ +{ + FileState *fsPtr = (FileState *) instanceData; + + if (direction & fsPtr->validMask) { + *handlePtr = (ClientData) fsPtr->fd; + return TCL_OK; + } else { + return TCL_ERROR; + } +} + +#ifdef SUPPORTS_TTY + +/* + *---------------------------------------------------------------------- + * + * TtyCloseProc -- + * + * This procedure is called from the generic IO level to perform + * channel-type-specific cleanup when a tty based channel is closed. + * + * Results: + * 0 if successful, errno if failed. + * + * Side effects: + * Closes the device of the channel. + * + *---------------------------------------------------------------------- + */ +static int +TtyCloseProc(instanceData, interp) + ClientData instanceData; /* Tty state. */ + Tcl_Interp *interp; /* For error reporting - unused. */ +{ +#if BAD_TIP35_FLUSH + TtyState *ttyPtr = (TtyState *) instanceData; +#endif /* BAD_TIP35_FLUSH */ +#ifdef TTYFLUSH + TTYFLUSH(ttyPtr->fs.fd); +#endif /* TTYFLUSH */ +#if 0 + /* + * TIP#35 agreed to remove the unsave so that TCL could be used as a + * simple stty. + * It would be cleaner to remove all the stuff related to + * TtyState.stateUpdated + * TtyState.savedState + * Then the structure TtyState would be the same as FileState. + * IMO this cleanup could better be done for the final 8.4 release + * after nobody complained about the missing unsave. -- schroedter + */ + if (ttyPtr->stateUpdated) { + SETIOSTATE(ttyPtr->fs.fd, &ttyPtr->savedState); + } +#endif + return FileCloseProc(instanceData, interp); +} + +/* + *---------------------------------------------------------------------- + * + * TtyOutputProc-- + * + * This procedure is invoked from the generic IO level to write + * output to a TTY channel. + * + * Results: + * The number of bytes written is returned or -1 on error. An + * output argument contains a POSIX error code if an error occurred, + * or zero. + * + * Side effects: + * Writes output on the output device of the channel + * if the channel is not designated to be closed. + * + *---------------------------------------------------------------------- + */ + +#if BAD_TIP35_FLUSH +static int +TtyOutputProc(instanceData, buf, toWrite, errorCodePtr) + ClientData instanceData; /* File state. */ + CONST char *buf; /* The data buffer. */ + int toWrite; /* How many bytes to write? */ + int *errorCodePtr; /* Where to store error code. */ +{ + if (TclInExit()) { + /* + * Do not write data during Tcl exit. + * Serial port may block preventing Tcl from exit. + */ + return toWrite; + } else { + return FileOutputProc(instanceData, buf, toWrite, errorCodePtr); + } +} +#endif /* BAD_TIP35_FLUSH */ + +#ifdef USE_TERMIOS +/* + *---------------------------------------------------------------------- + * + * TtyModemStatusStr -- + * + * Converts a RS232 modem status list of readable flags + * + *---------------------------------------------------------------------- + */ +static void +TtyModemStatusStr(status, dsPtr) + int status; /* RS232 modem status */ + Tcl_DString *dsPtr; /* Where to store string */ +{ +#ifdef TIOCM_CTS + Tcl_DStringAppendElement(dsPtr, "CTS"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_CTS) ? "1" : "0"); +#endif /* TIOCM_CTS */ +#ifdef TIOCM_DSR + Tcl_DStringAppendElement(dsPtr, "DSR"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_DSR) ? "1" : "0"); +#endif /* TIOCM_DSR */ +#ifdef TIOCM_RNG + Tcl_DStringAppendElement(dsPtr, "RING"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_RNG) ? "1" : "0"); +#endif /* TIOCM_RNG */ +#ifdef TIOCM_CD + Tcl_DStringAppendElement(dsPtr, "DCD"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_CD) ? "1" : "0"); +#endif /* TIOCM_CD */ +} +#endif /* USE_TERMIOS */ + +/* + *---------------------------------------------------------------------- + * + * TtySetOptionProc -- + * + * Sets an option on a channel. + * + * Results: + * A standard Tcl result. Also sets the interp's result on error if + * interp is not NULL. + * + * Side effects: + * May modify an option on a device. + * Sets Error message if needed (by calling Tcl_BadChannelOption). + * + *---------------------------------------------------------------------- + */ + +static int +TtySetOptionProc(instanceData, interp, optionName, value) + ClientData instanceData; /* File state. */ + Tcl_Interp *interp; /* For error reporting - can be NULL. */ + CONST char *optionName; /* Which option to set? */ + CONST char *value; /* New value for option. */ +{ + FileState *fsPtr = (FileState *) instanceData; + unsigned int len, vlen; + TtyAttrs tty; +#ifdef USE_TERMIOS + int flag, control, argc; + CONST char **argv; + IOSTATE iostate; +#endif /* USE_TERMIOS */ + + len = strlen(optionName); + vlen = strlen(value); + + /* + * Option -mode baud,parity,databits,stopbits + */ + if ((len > 2) && (strncmp(optionName, "-mode", len) == 0)) { + if (TtyParseMode(interp, value, &tty.baud, &tty.parity, &tty.data, + &tty.stop) != TCL_OK) { + return TCL_ERROR; + } + /* + * system calls results should be checked there. -- dl + */ + + TtySetAttributes(fsPtr->fd, &tty); + ((TtyState *) fsPtr)->stateUpdated = 1; + return TCL_OK; + } + +#ifdef USE_TERMIOS + + /* + * Option -handshake none|xonxoff|rtscts|dtrdsr + */ + if ((len > 1) && (strncmp(optionName, "-handshake", len) == 0)) { + /* + * Reset all handshake options + * DTR and RTS are ON by default + */ + GETIOSTATE(fsPtr->fd, &iostate); + iostate.c_iflag &= ~(IXON | IXOFF | IXANY); +#ifdef CRTSCTS + iostate.c_cflag &= ~CRTSCTS; +#endif /* CRTSCTS */ + if (strncasecmp(value, "NONE", vlen) == 0) { + /* leave all handshake options disabled */ + } else if (strncasecmp(value, "XONXOFF", vlen) == 0) { + iostate.c_iflag |= (IXON | IXOFF | IXANY); + } else if (strncasecmp(value, "RTSCTS", vlen) == 0) { +#ifdef CRTSCTS + iostate.c_cflag |= CRTSCTS; +#else /* !CRTSTS */ + UNSUPPORTED_OPTION("-handshake RTSCTS"); + return TCL_ERROR; +#endif /* CRTSCTS */ + } else if (strncasecmp(value, "DTRDSR", vlen) == 0) { + UNSUPPORTED_OPTION("-handshake DTRDSR"); + return TCL_ERROR; + } else { + if (interp) { + Tcl_AppendResult(interp, "bad value for -handshake: ", + "must be one of xonxoff, rtscts, dtrdsr or none", + (char *) NULL); + } + return TCL_ERROR; + } + SETIOSTATE(fsPtr->fd, &iostate); + return TCL_OK; + } + + /* + * Option -xchar {\x11 \x13} + */ + if ((len > 1) && (strncmp(optionName, "-xchar", len) == 0)) { + GETIOSTATE(fsPtr->fd, &iostate); + if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { + return TCL_ERROR; + } + if (argc == 2) { + iostate.c_cc[VSTART] = argv[0][0]; + iostate.c_cc[VSTOP] = argv[1][0]; + } else { + if (interp) { + Tcl_AppendResult(interp, + "bad value for -xchar: should be a list of two elements", + (char *) NULL); + } + ckfree((char *) argv); + return TCL_ERROR; + } + SETIOSTATE(fsPtr->fd, &iostate); + ckfree((char *) argv); + return TCL_OK; + } + + /* + * Option -timeout msec + */ + if ((len > 2) && (strncmp(optionName, "-timeout", len) == 0)) { + int msec; + + GETIOSTATE(fsPtr->fd, &iostate); + if (Tcl_GetInt(interp, value, &msec) != TCL_OK) { + return TCL_ERROR; + } + iostate.c_cc[VMIN] = 0; + iostate.c_cc[VTIME] = (msec == 0) ? 0 : (msec < 100) ? 1 : (msec+50)/100; + SETIOSTATE(fsPtr->fd, &iostate); + return TCL_OK; + } + + /* + * Option -ttycontrol {DTR 1 RTS 0 BREAK 0} + */ + if ((len > 4) && (strncmp(optionName, "-ttycontrol", len) == 0)) { + int i; + if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { + return TCL_ERROR; + } + if ((argc % 2) == 1) { + if (interp) { + Tcl_AppendResult(interp, + "bad value for -ttycontrol: should be a list of", + "signal,value pairs", (char *) NULL); + } + ckfree((char *) argv); + return TCL_ERROR; + } + + GETCONTROL(fsPtr->fd, &control); + for (i = 0; i < argc-1; i += 2) { + if (Tcl_GetBoolean(interp, argv[i+1], &flag) == TCL_ERROR) { + ckfree((char *) argv); + return TCL_ERROR; + } + if (strncasecmp(argv[i], "DTR", strlen(argv[i])) == 0) { +#ifdef TIOCM_DTR + if (flag) { + control |= TIOCM_DTR; + } else { + control &= ~TIOCM_DTR; + } +#else /* !TIOCM_DTR */ + UNSUPPORTED_OPTION("-ttycontrol DTR"); + ckfree((char *) argv); + return TCL_ERROR; +#endif /* TIOCM_DTR */ + } else if (strncasecmp(argv[i], "RTS", strlen(argv[i])) == 0) { +#ifdef TIOCM_RTS + if (flag) { + control |= TIOCM_RTS; + } else { + control &= ~TIOCM_RTS; + } +#else /* !TIOCM_RTS*/ + UNSUPPORTED_OPTION("-ttycontrol RTS"); + ckfree((char *) argv); + return TCL_ERROR; +#endif /* TIOCM_RTS*/ + } else if (strncasecmp(argv[i], "BREAK", strlen(argv[i])) == 0) { +#ifdef SETBREAK + SETBREAK(fsPtr->fd, flag); +#else /* !SETBREAK */ + UNSUPPORTED_OPTION("-ttycontrol BREAK"); + ckfree((char *) argv); + return TCL_ERROR; +#endif /* SETBREAK */ + } else { + if (interp) { + Tcl_AppendResult(interp, "bad signal \"", argv[i], + "\" for -ttycontrol: must be ", + "DTR, RTS or BREAK", (char *) NULL); + } + ckfree((char *) argv); + return TCL_ERROR; + } + } /* -ttycontrol options loop */ + + SETCONTROL(fsPtr->fd, &control); + ckfree((char *) argv); + return TCL_OK; + } + + return Tcl_BadChannelOption(interp, optionName, + "mode handshake timeout ttycontrol xchar "); + +#else /* !USE_TERMIOS */ + return Tcl_BadChannelOption(interp, optionName, "mode"); +#endif /* USE_TERMIOS */ +} + +/* + *---------------------------------------------------------------------- + * + * TtyGetOptionProc -- + * + * Gets a mode associated with an IO channel. If the optionName arg + * is non NULL, retrieves the value of that option. If the optionName + * arg is NULL, retrieves a list of alternating option names and + * values for the given channel. + * + * Results: + * A standard Tcl result. Also sets the supplied DString to the + * string value of the option(s) returned. + * + * Side effects: + * The string returned by this function is in static storage and + * may be reused at any time subsequent to the call. + * Sets Error message if needed (by calling Tcl_BadChannelOption). + * + *---------------------------------------------------------------------- + */ + +static int +TtyGetOptionProc(instanceData, interp, optionName, dsPtr) + ClientData instanceData; /* File state. */ + Tcl_Interp *interp; /* For error reporting - can be NULL. */ + CONST char *optionName; /* Option to get. */ + Tcl_DString *dsPtr; /* Where to store value(s). */ +{ + FileState *fsPtr = (FileState *) instanceData; + unsigned int len; + char buf[3 * TCL_INTEGER_SPACE + 16]; + TtyAttrs tty; + int valid = 0; /* flag if valid option parsed */ + + if (optionName == NULL) { + len = 0; + } else { + len = strlen(optionName); + } + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-mode"); + } + if (len==0 || (len>2 && strncmp(optionName, "-mode", len)==0)) { + valid = 1; + TtyGetAttributes(fsPtr->fd, &tty); + sprintf(buf, "%d,%c,%d,%d", tty.baud, tty.parity, tty.data, tty.stop); + Tcl_DStringAppendElement(dsPtr, buf); + } + +#ifdef USE_TERMIOS + /* + * get option -xchar + */ + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-xchar"); + Tcl_DStringStartSublist(dsPtr); + } + if (len==0 || (len>1 && strncmp(optionName, "-xchar", len)==0)) { + IOSTATE iostate; + valid = 1; + + GETIOSTATE(fsPtr->fd, &iostate); + sprintf(buf, "%c", iostate.c_cc[VSTART]); + Tcl_DStringAppendElement(dsPtr, buf); + sprintf(buf, "%c", iostate.c_cc[VSTOP]); + Tcl_DStringAppendElement(dsPtr, buf); + } + if (len == 0) { + Tcl_DStringEndSublist(dsPtr); + } + + /* + * get option -queue + * option is readonly and returned by [fconfigure chan -queue] + * but not returned by unnamed [fconfigure chan] + */ + if ((len > 1) && (strncmp(optionName, "-queue", len) == 0)) { + int inQueue=0, outQueue=0; + int inBuffered, outBuffered; + valid = 1; +#ifdef GETREADQUEUE + GETREADQUEUE(fsPtr->fd, inQueue); +#endif /* GETREADQUEUE */ +#ifdef GETWRITEQUEUE + GETWRITEQUEUE(fsPtr->fd, outQueue); +#endif /* GETWRITEQUEUE */ + inBuffered = Tcl_InputBuffered(fsPtr->channel); + outBuffered = Tcl_OutputBuffered(fsPtr->channel); + + sprintf(buf, "%d", inBuffered+inQueue); + Tcl_DStringAppendElement(dsPtr, buf); + sprintf(buf, "%d", outBuffered+outQueue); + Tcl_DStringAppendElement(dsPtr, buf); + } + + /* + * get option -ttystatus + * option is readonly and returned by [fconfigure chan -ttystatus] + * but not returned by unnamed [fconfigure chan] + */ + if ((len > 4) && (strncmp(optionName, "-ttystatus", len) == 0)) { + int status; + valid = 1; + GETCONTROL(fsPtr->fd, &status); + TtyModemStatusStr(status, dsPtr); + } +#endif /* USE_TERMIOS */ + + if (valid) { + return TCL_OK; + } else { + return Tcl_BadChannelOption(interp, optionName, +#ifdef USE_TERMIOS + "mode queue ttystatus xchar"); +#else /* !USE_TERMIOS */ + "mode"); +#endif /* USE_TERMIOS */ + } +} + +#undef DIRECT_BAUD +#ifdef B4800 +# if (B4800 == 4800) +# define DIRECT_BAUD +# endif /* B4800 == 4800 */ +#endif /* B4800 */ + +#ifdef DIRECT_BAUD +# define TtyGetSpeed(baud) ((unsigned) (baud)) +# define TtyGetBaud(speed) ((int) (speed)) +#else /* !DIRECT_BAUD */ + +static struct {int baud; unsigned long speed;} speeds[] = { +#ifdef B0 + {0, B0}, +#endif +#ifdef B50 + {50, B50}, +#endif +#ifdef B75 + {75, B75}, +#endif +#ifdef B110 + {110, B110}, +#endif +#ifdef B134 + {134, B134}, +#endif +#ifdef B150 + {150, B150}, +#endif +#ifdef B200 + {200, B200}, +#endif +#ifdef B300 + {300, B300}, +#endif +#ifdef B600 + {600, B600}, +#endif +#ifdef B1200 + {1200, B1200}, +#endif +#ifdef B1800 + {1800, B1800}, +#endif +#ifdef B2400 + {2400, B2400}, +#endif +#ifdef B4800 + {4800, B4800}, +#endif +#ifdef B9600 + {9600, B9600}, +#endif +#ifdef B14400 + {14400, B14400}, +#endif +#ifdef B19200 + {19200, B19200}, +#endif +#ifdef EXTA + {19200, EXTA}, +#endif +#ifdef B28800 + {28800, B28800}, +#endif +#ifdef B38400 + {38400, B38400}, +#endif +#ifdef EXTB + {38400, EXTB}, +#endif +#ifdef B57600 + {57600, B57600}, +#endif +#ifdef _B57600 + {57600, _B57600}, +#endif +#ifdef B76800 + {76800, B76800}, +#endif +#ifdef B115200 + {115200, B115200}, +#endif +#ifdef _B115200 + {115200, _B115200}, +#endif +#ifdef B153600 + {153600, B153600}, +#endif +#ifdef B230400 + {230400, B230400}, +#endif +#ifdef B307200 + {307200, B307200}, +#endif +#ifdef B460800 + {460800, B460800}, +#endif + {-1, 0} +}; + +/* + *--------------------------------------------------------------------------- + * + * TtyGetSpeed -- + * + * Given a baud rate, get the mask value that should be stored in + * the termios, termio, or sgttyb structure in order to select that + * baud rate. + * + * Results: + * As above. + * + * Side effects: + * None. + * + *--------------------------------------------------------------------------- + */ + +static unsigned long +TtyGetSpeed(baud) + int baud; /* The baud rate to look up. */ +{ + int bestIdx, bestDiff, i, diff; + + bestIdx = 0; + bestDiff = 1000000; + + /* + * If the baud rate does not correspond to one of the known mask values, + * choose the mask value whose baud rate is closest to the specified + * baud rate. + */ + + for (i = 0; speeds[i].baud >= 0; i++) { + diff = speeds[i].baud - baud; + if (diff < 0) { + diff = -diff; + } + if (diff < bestDiff) { + bestIdx = i; + bestDiff = diff; + } + } + return speeds[bestIdx].speed; +} + +/* + *--------------------------------------------------------------------------- + * + * TtyGetBaud -- + * + * Given a speed mask value from a termios, termio, or sgttyb + * structure, get the baus rate that corresponds to that mask value. + * + * Results: + * As above. If the mask value was not recognized, 0 is returned. + * + * Side effects: + * None. + * + *--------------------------------------------------------------------------- + */ + +static int +TtyGetBaud(speed) + unsigned long speed; /* Speed mask value to look up. */ +{ + int i; + + for (i = 0; speeds[i].baud >= 0; i++) { + if (speeds[i].speed == speed) { + return speeds[i].baud; + } + } + return 0; +} + +#endif /* !DIRECT_BAUD */ + + +/* + *--------------------------------------------------------------------------- + * + * TtyGetAttributes -- + * + * Get the current attributes of the specified serial device. + * + * Results: + * None. + * + * Side effects: + * None. + * + *--------------------------------------------------------------------------- + */ + +static void +TtyGetAttributes(fd, ttyPtr) + int fd; /* Open file descriptor for serial port to + * be queried. */ + TtyAttrs *ttyPtr; /* Buffer filled with serial port + * attributes. */ +{ + IOSTATE iostate; + int baud, parity, data, stop; + + GETIOSTATE(fd, &iostate); + +#ifdef USE_TERMIOS + baud = TtyGetBaud(cfgetospeed(&iostate)); + + parity = 'n'; +#ifdef PAREXT + switch ((int) (iostate.c_cflag & (PARENB | PARODD | PAREXT))) { + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + case PARENB | PAREXT : parity = 's'; break; + case PARENB | PARODD | PAREXT : parity = 'm'; break; + } +#else /* !PAREXT */ + switch ((int) (iostate.c_cflag & (PARENB | PARODD))) { + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + } +#endif /* !PAREXT */ + + data = iostate.c_cflag & CSIZE; + data = (data == CS5) ? 5 : (data == CS6) ? 6 : (data == CS7) ? 7 : 8; + + stop = (iostate.c_cflag & CSTOPB) ? 2 : 1; +#endif /* USE_TERMIOS */ + +#ifdef USE_TERMIO + baud = TtyGetBaud(iostate.c_cflag & CBAUD); + + parity = 'n'; + switch (iostate.c_cflag & (PARENB | PARODD | PAREXT)) { + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + case PARENB | PAREXT : parity = 's'; break; + case PARENB | PARODD | PAREXT : parity = 'm'; break; + } + + data = iostate.c_cflag & CSIZE; + data = (data == CS5) ? 5 : (data == CS6) ? 6 : (data == CS7) ? 7 : 8; + + stop = (iostate.c_cflag & CSTOPB) ? 2 : 1; +#endif /* USE_TERMIO */ + +#ifdef USE_SGTTY + baud = TtyGetBaud(iostate.sg_ospeed); + + parity = 'n'; + if (iostate.sg_flags & EVENP) { + parity = 'e'; + } else if (iostate.sg_flags & ODDP) { + parity = 'o'; + } + + data = (iostate.sg_flags & (EVENP | ODDP)) ? 7 : 8; + + stop = 1; +#endif /* USE_SGTTY */ + + ttyPtr->baud = baud; + ttyPtr->parity = parity; + ttyPtr->data = data; + ttyPtr->stop = stop; +} + +/* + *--------------------------------------------------------------------------- + * + * TtySetAttributes -- + * + * Set the current attributes of the specified serial device. + * + * Results: + * None. + * + * Side effects: + * None. + * + *--------------------------------------------------------------------------- + */ + +static void +TtySetAttributes(fd, ttyPtr) + int fd; /* Open file descriptor for serial port to + * be modified. */ + TtyAttrs *ttyPtr; /* Buffer containing new attributes for + * serial port. */ +{ + IOSTATE iostate; + +#ifdef USE_TERMIOS + int parity, data, flag; + + GETIOSTATE(fd, &iostate); + cfsetospeed(&iostate, TtyGetSpeed(ttyPtr->baud)); + cfsetispeed(&iostate, TtyGetSpeed(ttyPtr->baud)); + + flag = 0; + parity = ttyPtr->parity; + if (parity != 'n') { + flag |= PARENB; +#ifdef PAREXT + iostate.c_cflag &= ~PAREXT; + if ((parity == 'm') || (parity == 's')) { + flag |= PAREXT; + } +#endif /* PAREXT */ + if ((parity == 'm') || (parity == 'o')) { + flag |= PARODD; + } + } + data = ttyPtr->data; + flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; + if (ttyPtr->stop == 2) { + flag |= CSTOPB; + } + + iostate.c_cflag &= ~(PARENB | PARODD | CSIZE | CSTOPB); + iostate.c_cflag |= flag; + +#endif /* USE_TERMIOS */ + +#ifdef USE_TERMIO + int parity, data, flag; + + GETIOSTATE(fd, &iostate); + iostate.c_cflag &= ~CBAUD; + iostate.c_cflag |= TtyGetSpeed(ttyPtr->baud); + + flag = 0; + parity = ttyPtr->parity; + if (parity != 'n') { + flag |= PARENB; + if ((parity == 'm') || (parity == 's')) { + flag |= PAREXT; + } + if ((parity == 'm') || (parity == 'o')) { + flag |= PARODD; + } + } + data = ttyPtr->data; + flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; + if (ttyPtr->stop == 2) { + flag |= CSTOPB; + } + + iostate.c_cflag &= ~(PARENB | PARODD | PAREXT | CSIZE | CSTOPB); + iostate.c_cflag |= flag; + +#endif /* USE_TERMIO */ + +#ifdef USE_SGTTY + int parity; + + GETIOSTATE(fd, &iostate); + iostate.sg_ospeed = TtyGetSpeed(ttyPtr->baud); + iostate.sg_ispeed = TtyGetSpeed(ttyPtr->baud); + + parity = ttyPtr->parity; + if (parity == 'e') { + iostate.sg_flags &= ~ODDP; + iostate.sg_flags |= EVENP; + } else if (parity == 'o') { + iostate.sg_flags &= ~EVENP; + iostate.sg_flags |= ODDP; + } +#endif /* USE_SGTTY */ + + SETIOSTATE(fd, &iostate); +} + +/* + *--------------------------------------------------------------------------- + * + * TtyParseMode -- + * + * Parse the "-mode" argument to the fconfigure command. The argument + * is of the form baud,parity,data,stop. + * + * Results: + * The return value is TCL_OK if the argument was successfully + * parsed, TCL_ERROR otherwise. If TCL_ERROR is returned, an + * error message is left in the interp's result (if interp is non-NULL). + * + * Side effects: + * None. + * + *--------------------------------------------------------------------------- + */ + +static int +TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) + Tcl_Interp *interp; /* If non-NULL, interp for error return. */ + CONST char *mode; /* Mode string to be parsed. */ + int *speedPtr; /* Filled with baud rate from mode string. */ + int *parityPtr; /* Filled with parity from mode string. */ + int *dataPtr; /* Filled with data bits from mode string. */ + int *stopPtr; /* Filled with stop bits from mode string. */ +{ + int i, end; + char parity; + static char *bad = "bad value for -mode"; + + i = sscanf(mode, "%d,%c,%d,%d%n", speedPtr, &parity, dataPtr, + stopPtr, &end); + if ((i != 4) || (mode[end] != '\0')) { + if (interp != NULL) { + Tcl_AppendResult(interp, bad, ": should be baud,parity,data,stop", + NULL); + } + return TCL_ERROR; + } + /* + * Only allow setting mark/space parity on platforms that support it + * Make sure to allow for the case where strchr is a macro. + * [Bug: 5089] + */ + if ( +#if defined(PAREXT) || defined(USE_TERMIO) + strchr("noems", parity) == NULL +#else + strchr("noe", parity) == NULL +#endif /* PAREXT|USE_TERMIO */ + ) { + if (interp != NULL) { + Tcl_AppendResult(interp, bad, +#if defined(PAREXT) || defined(USE_TERMIO) + " parity: should be n, o, e, m, or s", +#else + " parity: should be n, o, or e", +#endif /* PAREXT|USE_TERMIO */ + NULL); + } + return TCL_ERROR; + } + *parityPtr = parity; + if ((*dataPtr < 5) || (*dataPtr > 8)) { + if (interp != NULL) { + Tcl_AppendResult(interp, bad, " data: should be 5, 6, 7, or 8", + NULL); + } + return TCL_ERROR; + } + if ((*stopPtr < 0) || (*stopPtr > 2)) { + if (interp != NULL) { + Tcl_AppendResult(interp, bad, " stop: should be 1 or 2", NULL); + } + return TCL_ERROR; + } + return TCL_OK; +} + +/* + *--------------------------------------------------------------------------- + * + * TtyInit -- + * + * Given file descriptor that refers to a serial port, + * initialize the serial port to a set of sane values so that + * Tcl can talk to a device located on the serial port. + * Note that no initialization happens if the initialize flag + * is not set; this is necessary for the correct handling of + * UNIX console TTYs at startup. + * + * Results: + * A pointer to a FileState suitable for use with Tcl_CreateChannel + * and the ttyChannelType structure. + * + * Side effects: + * Serial device initialized to non-blocking raw mode, similar to + * sockets (if initialize flag is non-zero.) All other modes can + * be simulated on top of this in Tcl. + * + *--------------------------------------------------------------------------- + */ + +static FileState * +TtyInit(fd, initialize) + int fd; /* Open file descriptor for serial port to + * be initialized. */ + int initialize; +{ + TtyState *ttyPtr; + + ttyPtr = (TtyState *) ckalloc((unsigned) sizeof(TtyState)); + GETIOSTATE(fd, &ttyPtr->savedState); + ttyPtr->stateUpdated = 0; + if (initialize) { + IOSTATE iostate = ttyPtr->savedState; + +#if defined(USE_TERMIOS) || defined(USE_TERMIO) + if (iostate.c_iflag != IGNBRK || + iostate.c_oflag != 0 || + iostate.c_lflag != 0 || + iostate.c_cflag & CREAD || + iostate.c_cc[VMIN] != 1 || + iostate.c_cc[VTIME] != 0) { + ttyPtr->stateUpdated = 1; + } + iostate.c_iflag = IGNBRK; + iostate.c_oflag = 0; + iostate.c_lflag = 0; + iostate.c_cflag |= CREAD; + iostate.c_cc[VMIN] = 1; + iostate.c_cc[VTIME] = 0; +#endif /* USE_TERMIOS|USE_TERMIO */ + +#ifdef USE_SGTTY + if ((iostate.sg_flags & (EVENP | ODDP)) || + !(iostate.sg_flags & RAW)) { + ttyPtr->stateUpdated = 1; + } + iostate.sg_flags &= (EVENP | ODDP); + iostate.sg_flags |= RAW; +#endif /* USE_SGTTY */ + + /* + * Only update if we're changing anything to avoid possible + * blocking. + */ + if (ttyPtr->stateUpdated) { + SETIOSTATE(fd, &iostate); + } + } + + return &ttyPtr->fs; +} +#endif /* SUPPORTS_TTY */ + +/* + *---------------------------------------------------------------------- + * + * TclpOpenFileChannel -- + * + * Open an file based channel on Unix systems. + * + * Results: + * The new channel or NULL. If NULL, the output argument + * errorCodePtr is set to a POSIX error and an error message is + * left in the interp's result if interp is not NULL. + * + * Side effects: + * May open the channel and may cause creation of a file on the + * file system. + * + *---------------------------------------------------------------------- + */ + +Tcl_Channel +TclpOpenFileChannel(interp, pathPtr, mode, permissions) + Tcl_Interp *interp; /* Interpreter for error reporting; + * can be NULL. */ + Tcl_Obj *pathPtr; /* Name of file to open. */ + int mode; /* POSIX open mode. */ + int permissions; /* If the open involves creating a + * file, with what modes to create + * it? */ +{ + int fd, channelPermissions; + FileState *fsPtr; + CONST char *native, *translation; + char channelName[16 + TCL_INTEGER_SPACE]; + Tcl_ChannelType *channelTypePtr; +#ifdef SUPPORTS_TTY + int ctl_tty; +#endif /* SUPPORTS_TTY */ +#ifdef DEPRECATED + ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); +#endif /* DEPRECATED */ + + switch (mode & (O_RDONLY | O_WRONLY | O_RDWR)) { + case O_RDONLY: + channelPermissions = TCL_READABLE; + break; + case O_WRONLY: + channelPermissions = TCL_WRITABLE; + break; + case O_RDWR: + channelPermissions = (TCL_READABLE | TCL_WRITABLE); + break; + default: + /* + * This may occurr if modeString was "", for example. + */ + panic("TclpOpenFileChannel: invalid mode value"); + return NULL; + } + + native = Tcl_FSGetNativePath(pathPtr); + if (native == NULL) { + return NULL; + } + fd = TclOSopen(native, mode, permissions); +#ifdef SUPPORTS_TTY + ctl_tty = (strcmp (native, "/dev/tty") == 0); +#endif /* SUPPORTS_TTY */ + + if (fd < 0) { + if (interp != (Tcl_Interp *) NULL) { + Tcl_AppendResult(interp, "couldn't open \"", + Tcl_GetString(pathPtr), "\": ", + Tcl_PosixError(interp), (char *) NULL); + } + return NULL; + } + + /* + * Set close-on-exec flag on the fd so that child processes will not + * inherit this fd. + */ + + fcntl(fd, F_SETFD, FD_CLOEXEC); + + sprintf(channelName, "file%d", fd); + +#ifdef SUPPORTS_TTY + if (!ctl_tty && isatty(fd)) { + /* + * Initialize the serial port to a set of sane parameters. + * Especially important if the remote device is set to echo and + * the serial port driver was also set to echo -- as soon as a char + * were sent to the serial port, the remote device would echo it, + * then the serial driver would echo it back to the device, etc. + */ + + translation = "auto crlf"; + channelTypePtr = &ttyChannelType; + fsPtr = TtyInit(fd, 1); + } else +#endif /* SUPPORTS_TTY */ + { + translation = NULL; + channelTypePtr = &fileChannelType; + fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); + } + +#ifdef DEPRECATED + if (channelTypePtr == &fileChannelType) { + /* TIP #218. Removed the code inserting the new structure + * into the global list. This is now handled in the thread + * action callbacks, and only there. + */ + fsPtr->nextPtr = NULL; + } +#endif /* DEPRECATED */ + fsPtr->validMask = channelPermissions | TCL_EXCEPTION; + fsPtr->fd = fd; + + fsPtr->channel = Tcl_CreateChannel(channelTypePtr, channelName, + (ClientData) fsPtr, channelPermissions); + + if (translation != NULL) { + /* + * Gotcha. Most modems need a "\r" at the end of the command + * sequence. If you just send "at\n", the modem will not respond + * with "OK" because it never got a "\r" to actually invoke the + * command. So, by default, newlines are translated to "\r\n" on + * output to avoid "bug" reports that the serial port isn't working. + */ + + if (Tcl_SetChannelOption(interp, fsPtr->channel, "-translation", + translation) != TCL_OK) { + Tcl_Close(NULL, fsPtr->channel); + return NULL; + } + } + + return fsPtr->channel; +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_MakeFileChannel -- + * + * Makes a Tcl_Channel from an existing OS level file handle. + * + * Results: + * The Tcl_Channel created around the preexisting OS level file handle. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +EXPORT_C Tcl_Channel +Tcl_MakeFileChannel(handle, mode) + ClientData handle; /* OS level handle. */ + int mode; /* ORed combination of TCL_READABLE and + * TCL_WRITABLE to indicate file mode. */ +{ + FileState *fsPtr; + char channelName[16 + TCL_INTEGER_SPACE]; + int fd = (int) handle; + Tcl_ChannelType *channelTypePtr; +#ifdef DEPRECATED + ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); +#endif /* DEPRECATED */ + struct sockaddr sockaddr; + socklen_t sockaddrLen = sizeof(sockaddr); + + if (mode == 0) { + return NULL; + } + + + /* + * Look to see if a channel with this fd and the same mode already exists. + * If the fd is used, but the mode doesn't match, return NULL. + */ + +#ifdef DEPRECATED + for (fsPtr = tsdPtr->firstFilePtr; fsPtr != NULL; fsPtr = fsPtr->nextPtr) { + if (fsPtr->fd == fd) { + return ((mode|TCL_EXCEPTION) == fsPtr->validMask) ? + fsPtr->channel : NULL; + } + } +#endif /* DEPRECATED */ + + sockaddr.sa_family = AF_UNSPEC; + +#ifdef SUPPORTS_TTY + if (isatty(fd)) { + fsPtr = TtyInit(fd, 0); + channelTypePtr = &ttyChannelType; + sprintf(channelName, "serial%d", fd); + } else +#endif /* SUPPORTS_TTY */ + if (getsockname(fd, (struct sockaddr *)&sockaddr, &sockaddrLen) == 0 + && sockaddrLen > 0 + && sockaddr.sa_family == AF_INET) { + return MakeTcpClientChannelMode((ClientData) fd, mode); + } else { + channelTypePtr = &fileChannelType; + fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); + sprintf(channelName, "file%d", fd); + } + +#ifdef DEPRECATED + if (channelTypePtr == &fileChannelType) { + fsPtr->nextPtr = tsdPtr->firstFilePtr; + tsdPtr->firstFilePtr = fsPtr; + } +#endif /* DEPRECATED */ + fsPtr->fd = fd; + fsPtr->validMask = mode | TCL_EXCEPTION; + fsPtr->channel = Tcl_CreateChannel(channelTypePtr, channelName, + (ClientData) fsPtr, mode); + + return fsPtr->channel; +} + +/* + *---------------------------------------------------------------------- + * + * TcpBlockModeProc -- + * + * This procedure is invoked by the generic IO level to set blocking + * and nonblocking mode on a TCP socket based channel. + * + * Results: + * 0 if successful, errno when failed. + * + * Side effects: + * Sets the device into blocking or nonblocking mode. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static int +TcpBlockModeProc(instanceData, mode) + ClientData instanceData; /* Socket state. */ + int mode; /* The mode to set. Can be one of + * TCL_MODE_BLOCKING or + * TCL_MODE_NONBLOCKING. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + int setting; + +#ifndef USE_FIONBIO + setting = fcntl(statePtr->fd, F_GETFL); + if (mode == TCL_MODE_BLOCKING) { + statePtr->flags &= (~(TCP_ASYNC_SOCKET)); + setting &= (~(O_NONBLOCK)); + } else { + statePtr->flags |= TCP_ASYNC_SOCKET; + setting |= O_NONBLOCK; + } + if (fcntl(statePtr->fd, F_SETFL, setting) < 0) { + return errno; + } +#else /* USE_FIONBIO */ + if (mode == TCL_MODE_BLOCKING) { + statePtr->flags &= (~(TCP_ASYNC_SOCKET)); + setting = 0; + if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { + return errno; + } + } else { + statePtr->flags |= TCP_ASYNC_SOCKET; + setting = 1; + if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { + return errno; + } + } +#endif /* !USE_FIONBIO */ + + return 0; +} + +/* + *---------------------------------------------------------------------- + * + * WaitForConnect -- + * + * Waits for a connection on an asynchronously opened socket to + * be completed. + * + * Results: + * None. + * + * Side effects: + * The socket is connected after this function returns. + * + *---------------------------------------------------------------------- + */ + +static int +WaitForConnect(statePtr, errorCodePtr) + TcpState *statePtr; /* State of the socket. */ + int *errorCodePtr; /* Where to store errors? */ +{ + int timeOut; /* How long to wait. */ + int state; /* Of calling TclWaitForFile. */ + int flags; /* fcntl flags for the socket. */ + + /* + * If an asynchronous connect is in progress, attempt to wait for it + * to complete before reading. + */ + + if (statePtr->flags & TCP_ASYNC_CONNECT) { + if (statePtr->flags & TCP_ASYNC_SOCKET) { + timeOut = 0; + } else { + timeOut = -1; + } + errno = 0; + state = TclUnixWaitForFile(statePtr->fd, + TCL_WRITABLE | TCL_EXCEPTION, timeOut); + if (!(statePtr->flags & TCP_ASYNC_SOCKET)) { +#ifndef USE_FIONBIO + flags = fcntl(statePtr->fd, F_GETFL); + flags &= (~(O_NONBLOCK)); + (void) fcntl(statePtr->fd, F_SETFL, flags); +#else /* USE_FIONBIO */ + flags = 0; + (void) ioctl(statePtr->fd, FIONBIO, &flags); +#endif /* !USE_FIONBIO */ + } + if (state & TCL_EXCEPTION) { + return -1; + } + if (state & TCL_WRITABLE) { + statePtr->flags &= (~(TCP_ASYNC_CONNECT)); + } else if (timeOut == 0) { + *errorCodePtr = errno = EWOULDBLOCK; + return -1; + } + } + return 0; +} + +/* + *---------------------------------------------------------------------- + * + * TcpInputProc -- + * + * This procedure is invoked by the generic IO level to read input + * from a TCP socket based channel. + * + * NOTE: We cannot share code with FilePipeInputProc because here + * we must use recv to obtain the input from the channel, not read. + * + * Results: + * The number of bytes read is returned or -1 on error. An output + * argument contains the POSIX error code on error, or zero if no + * error occurred. + * + * Side effects: + * Reads input from the input device of the channel. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static int +TcpInputProc(instanceData, buf, bufSize, errorCodePtr) + ClientData instanceData; /* Socket state. */ + char *buf; /* Where to store data read. */ + int bufSize; /* How much space is available + * in the buffer? */ + int *errorCodePtr; /* Where to store error code. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + int bytesRead, state; + + *errorCodePtr = 0; + state = WaitForConnect(statePtr, errorCodePtr); + if (state != 0) { + return -1; + } + bytesRead = recv(statePtr->fd, buf, (size_t) bufSize, 0); + if (bytesRead > -1) { + return bytesRead; + } + if (errno == ECONNRESET) { + /* + * Turn ECONNRESET into a soft EOF condition. + */ + + return 0; + } + *errorCodePtr = errno; + return -1; +} + +/* + *---------------------------------------------------------------------- + * + * TcpOutputProc -- + * + * This procedure is invoked by the generic IO level to write output + * to a TCP socket based channel. + * + * NOTE: We cannot share code with FilePipeOutputProc because here + * we must use send, not write, to get reliable error reporting. + * + * Results: + * The number of bytes written is returned. An output argument is + * set to a POSIX error code if an error occurred, or zero. + * + * Side effects: + * Writes output on the output device of the channel. + * + *---------------------------------------------------------------------- + */ + +static int +TcpOutputProc(instanceData, buf, toWrite, errorCodePtr) + ClientData instanceData; /* Socket state. */ + CONST char *buf; /* The data buffer. */ + int toWrite; /* How many bytes to write? */ + int *errorCodePtr; /* Where to store error code. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + int written; + int state; /* Of waiting for connection. */ + + *errorCodePtr = 0; + state = WaitForConnect(statePtr, errorCodePtr); + if (state != 0) { + return -1; + } + written = send(statePtr->fd, buf, (size_t) toWrite, 0); + if (written > -1) { + return written; + } + *errorCodePtr = errno; + return -1; +} + +/* + *---------------------------------------------------------------------- + * + * TcpCloseProc -- + * + * This procedure is invoked by the generic IO level to perform + * channel-type-specific cleanup when a TCP socket based channel + * is closed. + * + * Results: + * 0 if successful, the value of errno if failed. + * + * Side effects: + * Closes the socket of the channel. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static int +TcpCloseProc(instanceData, interp) + ClientData instanceData; /* The socket to close. */ + Tcl_Interp *interp; /* For error reporting - unused. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + int errorCode = 0; + + /* + * Delete a file handler that may be active for this socket if this + * is a server socket - the file handler was created automatically + * by Tcl as part of the mechanism to accept new client connections. + * Channel handlers are already deleted in the generic IO channel + * closing code that called this function, so we do not have to + * delete them here. + */ + + Tcl_DeleteFileHandler(statePtr->fd); + + if (close(statePtr->fd) < 0) { + errorCode = errno; + } + ckfree((char *) statePtr); + + return errorCode; +} + +/* + *---------------------------------------------------------------------- + * + * TcpGetOptionProc -- + * + * Computes an option value for a TCP socket based channel, or a + * list of all options and their values. + * + * Note: This code is based on code contributed by John Haxby. + * + * Results: + * A standard Tcl result. The value of the specified option or a + * list of all options and their values is returned in the + * supplied DString. Sets Error message if needed. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static int +TcpGetOptionProc(instanceData, interp, optionName, dsPtr) + ClientData instanceData; /* Socket state. */ + Tcl_Interp *interp; /* For error reporting - can be NULL. */ + CONST char *optionName; /* Name of the option to + * retrieve the value for, or + * NULL to get all options and + * their values. */ + Tcl_DString *dsPtr; /* Where to store the computed + * value; initialized by caller. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + struct sockaddr_in sockname; + struct sockaddr_in peername; + struct hostent *hostEntPtr; + socklen_t size = sizeof(struct sockaddr_in); + size_t len = 0; + char buf[TCL_INTEGER_SPACE]; + + if (optionName != (char *) NULL) { + len = strlen(optionName); + } + + if ((len > 1) && (optionName[1] == 'e') && + (strncmp(optionName, "-error", len) == 0)) { + socklen_t optlen = sizeof(int); + int err, ret; + err = 0; + + + ret = getsockopt(statePtr->fd, SOL_SOCKET, SO_ERROR, + (char *)&err, &optlen); + if (ret < 0) { + err = errno; + } + if (err != 0) { + Tcl_DStringAppend(dsPtr, Tcl_ErrnoMsg(err), -1); + } + return TCL_OK; + } + + if ((len == 0) || + ((len > 1) && (optionName[1] == 'p') && + (strncmp(optionName, "-peername", len) == 0))) { + if (getpeername(statePtr->fd, (struct sockaddr *) &peername, + &size) >= 0) { + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-peername"); + Tcl_DStringStartSublist(dsPtr); + } + Tcl_DStringAppendElement(dsPtr, inet_ntoa(peername.sin_addr)); + hostEntPtr = TclpGetHostByAddr( /* INTL: Native. */ + (char *) &peername.sin_addr, + sizeof(peername.sin_addr), AF_INET); + if (hostEntPtr != (struct hostent *) NULL) { + Tcl_DString ds; + + Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); + Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); + Tcl_DStringFree(&ds); + } else { + Tcl_DStringAppendElement(dsPtr, inet_ntoa(peername.sin_addr)); + } + TclFormatInt(buf, ntohs(peername.sin_port)); + Tcl_DStringAppendElement(dsPtr, buf); + if (len == 0) { + Tcl_DStringEndSublist(dsPtr); + } else { + return TCL_OK; + } + } else { + /* + * getpeername failed - but if we were asked for all the options + * (len==0), don't flag an error at that point because it could + * be an fconfigure request on a server socket. (which have + * no peer). same must be done on win&mac. + */ + + if (len) { + if (interp) { + Tcl_AppendResult(interp, "can't get peername: ", + Tcl_PosixError(interp), (char *) NULL); + } + return TCL_ERROR; + } + } + } + + if ((len == 0) || + ((len > 1) && (optionName[1] == 's') && + (strncmp(optionName, "-sockname", len) == 0))) { + if (getsockname(statePtr->fd, (struct sockaddr *) &sockname, + &size) >= 0) { + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-sockname"); + Tcl_DStringStartSublist(dsPtr); + } + Tcl_DStringAppendElement(dsPtr, inet_ntoa(sockname.sin_addr)); + hostEntPtr = TclpGetHostByAddr( /* INTL: Native. */ + (char *) &sockname.sin_addr, + sizeof(sockname.sin_addr), AF_INET); + if (hostEntPtr != (struct hostent *) NULL) { + Tcl_DString ds; + + Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); + Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); + Tcl_DStringFree(&ds); + } else { + Tcl_DStringAppendElement(dsPtr, inet_ntoa(sockname.sin_addr)); + } + TclFormatInt(buf, ntohs(sockname.sin_port)); + Tcl_DStringAppendElement(dsPtr, buf); + if (len == 0) { + Tcl_DStringEndSublist(dsPtr); + } else { + return TCL_OK; + } + } else { + if (interp) { + Tcl_AppendResult(interp, "can't get sockname: ", + Tcl_PosixError(interp), (char *) NULL); + } + return TCL_ERROR; + } + } + + if (len > 0) { + return Tcl_BadChannelOption(interp, optionName, "peername sockname"); + } + + return TCL_OK; +} + +/* + *---------------------------------------------------------------------- + * + * TcpWatchProc -- + * + * Initialize the notifier to watch the fd from this channel. + * + * Results: + * None. + * + * Side effects: + * Sets up the notifier so that a future event on the channel will + * be seen by Tcl. + * + *---------------------------------------------------------------------- + */ + +static void +TcpWatchProc(instanceData, mask) + ClientData instanceData; /* The socket state. */ + int mask; /* Events of interest; an OR-ed + * combination of TCL_READABLE, + * TCL_WRITABLE and TCL_EXCEPTION. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + + /* + * Make sure we don't mess with server sockets since they will never + * be readable or writable at the Tcl level. This keeps Tcl scripts + * from interfering with the -accept behavior. + */ + + if (!statePtr->acceptProc) { + if (mask) { + Tcl_CreateFileHandler(statePtr->fd, mask, + (Tcl_FileProc *) Tcl_NotifyChannel, + (ClientData) statePtr->channel); + } else { + Tcl_DeleteFileHandler(statePtr->fd); + } + } +} + +/* + *---------------------------------------------------------------------- + * + * TcpGetHandleProc -- + * + * Called from Tcl_GetChannelHandle to retrieve OS handles from inside + * a TCP socket based channel. + * + * Results: + * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if + * there is no handle for the specified direction. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static int +TcpGetHandleProc(instanceData, direction, handlePtr) + ClientData instanceData; /* The socket state. */ + int direction; /* Not used. */ + ClientData *handlePtr; /* Where to store the handle. */ +{ + TcpState *statePtr = (TcpState *) instanceData; + + *handlePtr = (ClientData)statePtr->fd; + return TCL_OK; +} + +/* + *---------------------------------------------------------------------- + * + * CreateSocket -- + * + * This function opens a new socket in client or server mode + * and initializes the TcpState structure. + * + * Results: + * Returns a new TcpState, or NULL with an error in the interp's + * result, if interp is not NULL. + * + * Side effects: + * Opens a socket. + * + *---------------------------------------------------------------------- + */ + +static TcpState * +CreateSocket(interp, port, host, server, myaddr, myport, async) + Tcl_Interp *interp; /* For error reporting; can be NULL. */ + int port; /* Port number to open. */ + CONST char *host; /* Name of host on which to open port. + * NULL implies INADDR_ANY */ + int server; /* 1 if socket should be a server socket, + * else 0 for a client socket. */ + CONST char *myaddr; /* Optional client-side address */ + int myport; /* Optional client-side port */ + int async; /* If nonzero and creating a client socket, + * attempt to do an async connect. Otherwise + * do a synchronous connect or bind. */ +{ + int status, sock, asyncConnect, curState, origState; + struct sockaddr_in sockaddr; /* socket address */ + struct sockaddr_in mysockaddr; /* Socket address for client */ + TcpState *statePtr; + + sock = -1; + origState = 0; + if (! CreateSocketAddress(&sockaddr, host, port)) { + goto addressError; + } + if ((myaddr != NULL || myport != 0) && + ! CreateSocketAddress(&mysockaddr, myaddr, myport)) { + goto addressError; + } + + sock = socket(AF_INET, SOCK_STREAM, 0); + if (sock < 0) { + goto addressError; + } + + /* + * Set the close-on-exec flag so that the socket will not get + * inherited by child processes. + */ + + fcntl(sock, F_SETFD, FD_CLOEXEC); + + /* + * Set kernel space buffering + */ + + TclSockMinimumBuffers(sock, SOCKET_BUFSIZE); + + asyncConnect = 0; + status = 0; + if (server) { + /* + * Set up to reuse server addresses automatically and bind to the + * specified port. + */ + + status = 1; + (void) setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *) &status, + sizeof(status)); + status = bind(sock, (struct sockaddr *) &sockaddr, + sizeof(struct sockaddr)); + if (status != -1) { + status = listen(sock, SOMAXCONN); + } + } else { + if (myaddr != NULL || myport != 0) { + curState = 1; + (void) setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, + (char *) &curState, sizeof(curState)); + status = bind(sock, (struct sockaddr *) &mysockaddr, + sizeof(struct sockaddr)); + if (status < 0) { + goto bindError; + } + } + + /* + * Attempt to connect. The connect may fail at present with an + * EINPROGRESS but at a later time it will complete. The caller + * will set up a file handler on the socket if she is interested in + * being informed when the connect completes. + */ + + if (async) { +#ifndef USE_FIONBIO + origState = fcntl(sock, F_GETFL); + curState = origState | O_NONBLOCK; + status = fcntl(sock, F_SETFL, curState); +#else /* USE_FIONBIO */ + curState = 1; + status = ioctl(sock, FIONBIO, &curState); +#endif /* !USE_FIONBIO */ + } else { + status = 0; + } + if (status > -1) { + status = connect(sock, (struct sockaddr *) &sockaddr, + sizeof(sockaddr)); + if (status < 0) { + if (errno == EINPROGRESS) { + asyncConnect = 1; + status = 0; + } + } else { + /* + * Here we are if the connect succeeds. In case of an + * asynchronous connect we have to reset the channel to + * blocking mode. This appears to happen not very often, + * but e.g. on a HP 9000/800 under HP-UX B.11.00 we enter + * this stage. [Bug: 4388] + */ + if (async) { +#ifndef USE_FIONBIO + origState = fcntl(sock, F_GETFL); + curState = origState & ~(O_NONBLOCK); + status = fcntl(sock, F_SETFL, curState); +#else /* USE_FIONBIO */ + curState = 0; + status = ioctl(sock, FIONBIO, &curState); +#endif /* !USE_FIONBIO */ + } + } + } + } + +bindError: + if (status < 0) { + if (interp != NULL) { + Tcl_AppendResult(interp, "couldn't open socket: ", + Tcl_PosixError(interp), (char *) NULL); + } + if (sock != -1) { + close(sock); + } + return NULL; + } + + /* + * Allocate a new TcpState for this socket. + */ + + statePtr = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); + statePtr->flags = 0; + if (asyncConnect) { + statePtr->flags = TCP_ASYNC_CONNECT; + } + statePtr->fd = sock; + + return statePtr; + +addressError: + if (sock != -1) { + close(sock); + } + if (interp != NULL) { + Tcl_AppendResult(interp, "couldn't open socket: ", + Tcl_PosixError(interp), (char *) NULL); + } + return NULL; +} + +/* + *---------------------------------------------------------------------- + * + * CreateSocketAddress -- + * + * This function initializes a sockaddr structure for a host and port. + * + * Results: + * 1 if the host was valid, 0 if the host could not be converted to + * an IP address. + * + * Side effects: + * Fills in the *sockaddrPtr structure. + * + *---------------------------------------------------------------------- + */ + +static int +CreateSocketAddress(sockaddrPtr, host, port) + struct sockaddr_in *sockaddrPtr; /* Socket address */ + CONST char *host; /* Host. NULL implies INADDR_ANY */ + int port; /* Port number */ +{ + struct hostent *hostent; /* Host database entry */ + struct in_addr addr; /* For 64/32 bit madness */ + +#ifdef __SYMBIAN32__ + if (host && !strcmp(host, "localhost")) { + char* loc = strstr(host, "localhost"); + memcpy(loc, "127.0.0.1", 9); + } +#endif + (void) memset((VOID *) sockaddrPtr, '\0', sizeof(struct sockaddr_in)); + sockaddrPtr->sin_family = AF_INET; + sockaddrPtr->sin_port = htons((unsigned short) (port & 0xFFFF)); + if (host == NULL) { + addr.s_addr = INADDR_ANY; + } else { + Tcl_DString ds; + CONST char *native; + + if (host == NULL) { + native = NULL; + } else { + native = Tcl_UtfToExternalDString(NULL, host, -1, &ds); + } + addr.s_addr = inet_addr(native); /* INTL: Native. */ + /* + * This is 0xFFFFFFFF to ensure that it compares as a 32bit -1 + * on either 32 or 64 bits systems. + */ + if (addr.s_addr == 0xFFFFFFFF) { + hostent = TclpGetHostByName(native); /* INTL: Native. */ + if (hostent != (struct hostent *) NULL) { + memcpy((VOID *) &addr, + (VOID *) hostent->h_addr_list[0], + (size_t) hostent->h_length); + } else { +#ifdef EHOSTUNREACH + errno = EHOSTUNREACH; +#else /* !EHOSTUNREACH */ +#ifdef ENXIO + errno = ENXIO; +#endif /* ENXIO */ +#endif /* EHOSTUNREACH */ + if (native != NULL) { + Tcl_DStringFree(&ds); + } + return 0; /* error */ + } + } + if (native != NULL) { + Tcl_DStringFree(&ds); + } + } + + /* + * NOTE: On 64 bit machines the assignment below is rumored to not + * do the right thing. Please report errors related to this if you + * observe incorrect behavior on 64 bit machines such as DEC Alphas. + * Should we modify this code to do an explicit memcpy? + */ + + sockaddrPtr->sin_addr.s_addr = addr.s_addr; + return 1; /* Success. */ +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_OpenTcpClient -- + * + * Opens a TCP client socket and creates a channel around it. + * + * Results: + * The channel or NULL if failed. An error message is returned + * in the interpreter on failure. + * + * Side effects: + * Opens a client socket and creates a new channel. + * + *---------------------------------------------------------------------- + */ + +EXPORT_C Tcl_Channel +Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) + Tcl_Interp *interp; /* For error reporting; can be NULL. */ + int port; /* Port number to open. */ + CONST char *host; /* Host on which to open port. */ + CONST char *myaddr; /* Client-side address */ + int myport; /* Client-side port */ + int async; /* If nonzero, attempt to do an + * asynchronous connect. Otherwise + * we do a blocking connect. */ +{ + TcpState *statePtr; + char channelName[16 + TCL_INTEGER_SPACE]; + + /* + * Create a new client socket and wrap it in a channel. + */ + + statePtr = CreateSocket(interp, port, host, 0, myaddr, myport, async); + if (statePtr == NULL) { + return NULL; + } + + statePtr->acceptProc = NULL; + statePtr->acceptProcData = (ClientData) NULL; + + sprintf(channelName, "sock%d", statePtr->fd); + + statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, + (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE)); + if (Tcl_SetChannelOption(interp, statePtr->channel, "-translation", + "auto crlf") == TCL_ERROR) { + Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); + return NULL; + } + return statePtr->channel; +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_MakeTcpClientChannel -- + * + * Creates a Tcl_Channel from an existing client TCP socket. + * + * Results: + * The Tcl_Channel wrapped around the preexisting TCP socket. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +EXPORT_C Tcl_Channel +Tcl_MakeTcpClientChannel(sock) + ClientData sock; /* The socket to wrap up into a channel. */ +{ + return MakeTcpClientChannelMode(sock, (TCL_READABLE | TCL_WRITABLE)); +} + +/* + *---------------------------------------------------------------------- + * + * MakeTcpClientChannelMode -- + * + * Creates a Tcl_Channel from an existing client TCP socket + * with given mode. + * + * Results: + * The Tcl_Channel wrapped around the preexisting TCP socket. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static Tcl_Channel +MakeTcpClientChannelMode(sock, mode) + ClientData sock; /* The socket to wrap up into a channel. */ + int mode; /* ORed combination of TCL_READABLE and + * TCL_WRITABLE to indicate file mode. */ +{ + TcpState *statePtr; + char channelName[16 + TCL_INTEGER_SPACE]; + + statePtr = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); + statePtr->fd = (int) sock; + statePtr->flags = 0; + statePtr->acceptProc = NULL; + statePtr->acceptProcData = (ClientData) NULL; + + sprintf(channelName, "sock%d", statePtr->fd); + + statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, + (ClientData) statePtr, mode); + if (Tcl_SetChannelOption((Tcl_Interp *) NULL, statePtr->channel, + "-translation", "auto crlf") == TCL_ERROR) { + Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); + return NULL; + } + return statePtr->channel; +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_OpenTcpServer -- + * + * Opens a TCP server socket and creates a channel around it. + * + * Results: + * The channel or NULL if failed. If an error occurred, an + * error message is left in the interp's result if interp is + * not NULL. + * + * Side effects: + * Opens a server socket and creates a new channel. + * + *---------------------------------------------------------------------- + */ + +EXPORT_C Tcl_Channel +Tcl_OpenTcpServer(interp, port, myHost, acceptProc, acceptProcData) + Tcl_Interp *interp; /* For error reporting - may be + * NULL. */ + int port; /* Port number to open. */ + CONST char *myHost; /* Name of local host. */ + Tcl_TcpAcceptProc *acceptProc; /* Callback for accepting connections + * from new clients. */ + ClientData acceptProcData; /* Data for the callback. */ +{ + TcpState *statePtr; + char channelName[16 + TCL_INTEGER_SPACE]; + + /* + * Create a new client socket and wrap it in a channel. + */ + + statePtr = CreateSocket(interp, port, myHost, 1, NULL, 0, 0); + if (statePtr == NULL) { + return NULL; + } + + statePtr->acceptProc = acceptProc; + statePtr->acceptProcData = acceptProcData; + + /* + * Set up the callback mechanism for accepting connections + * from new clients. + */ + + Tcl_CreateFileHandler(statePtr->fd, TCL_READABLE, TcpAccept, + (ClientData) statePtr); + sprintf(channelName, "sock%d", statePtr->fd); + statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, + (ClientData) statePtr, 0); + return statePtr->channel; +} + +/* + *---------------------------------------------------------------------- + * + * TcpAccept -- + * Accept a TCP socket connection. This is called by the event loop. + * + * Results: + * None. + * + * Side effects: + * Creates a new connection socket. Calls the registered callback + * for the connection acceptance mechanism. + * + *---------------------------------------------------------------------- + */ + + /* ARGSUSED */ +static void +TcpAccept(data, mask) + ClientData data; /* Callback token. */ + int mask; /* Not used. */ +{ + TcpState *sockState; /* Client data of server socket. */ + int newsock; /* The new client socket */ + TcpState *newSockState; /* State for new socket. */ + struct sockaddr_in addr; /* The remote address */ + socklen_t len; /* For accept interface */ + char channelName[16 + TCL_INTEGER_SPACE]; + + sockState = (TcpState *) data; + + len = sizeof(struct sockaddr_in); + newsock = accept(sockState->fd, (struct sockaddr *) &addr, &len); + if (newsock < 0) { + return; + } + + /* + * Set close-on-exec flag to prevent the newly accepted socket from + * being inherited by child processes. + */ + + (void) fcntl(newsock, F_SETFD, FD_CLOEXEC); + + newSockState = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); + + newSockState->flags = 0; + newSockState->fd = newsock; + newSockState->acceptProc = NULL; + newSockState->acceptProcData = NULL; + + sprintf(channelName, "sock%d", newsock); + newSockState->channel = Tcl_CreateChannel(&tcpChannelType, channelName, + (ClientData) newSockState, (TCL_READABLE | TCL_WRITABLE)); + + Tcl_SetChannelOption(NULL, newSockState->channel, "-translation", + "auto crlf"); + + if (sockState->acceptProc != NULL) { + (*sockState->acceptProc)(sockState->acceptProcData, + newSockState->channel, inet_ntoa(addr.sin_addr), + ntohs(addr.sin_port)); + } +} + +/* + *---------------------------------------------------------------------- + * + * TclpGetDefaultStdChannel -- + * + * Creates channels for standard input, standard output or standard + * error output if they do not already exist. + * + * Results: + * Returns the specified default standard channel, or NULL. + * + * Side effects: + * May cause the creation of a standard channel and the underlying + * file. + * + *---------------------------------------------------------------------- + */ + +Tcl_Channel +TclpGetDefaultStdChannel(type) + int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ +{ + Tcl_Channel channel = NULL; + int fd = 0; /* Initializations needed to prevent */ + int mode = 0; /* compiler warning (used before set). */ + char *bufMode = NULL; + + /* + * Some #def's to make the code a little clearer! + */ +#define ZERO_OFFSET ((Tcl_SeekOffset) 0) +#define ERROR_OFFSET ((Tcl_SeekOffset) -1) + + switch (type) { + case TCL_STDIN: + if ((TclOSseek(0, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return (Tcl_Channel) NULL; + } + fd = 0; + mode = TCL_READABLE; + bufMode = "line"; + break; + case TCL_STDOUT: + if ((TclOSseek(1, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return (Tcl_Channel) NULL; + } + fd = 1; + mode = TCL_WRITABLE; + bufMode = "line"; + break; + case TCL_STDERR: + if ((TclOSseek(2, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return (Tcl_Channel) NULL; + } + fd = 2; + mode = TCL_WRITABLE; + bufMode = "none"; + break; + default: + panic("TclGetDefaultStdChannel: Unexpected channel type"); + break; + } + +#undef ZERO_OFFSET +#undef ERROR_OFFSET + + channel = Tcl_MakeFileChannel((ClientData) fd, mode); + if (channel == NULL) { + return NULL; + } + + /* + * Set up the normal channel options for stdio handles. + */ + + if (Tcl_GetChannelType(channel) == &fileChannelType) { + Tcl_SetChannelOption(NULL, channel, "-translation", "auto"); + } else { + Tcl_SetChannelOption(NULL, channel, "-translation", "auto crlf"); + } + Tcl_SetChannelOption(NULL, channel, "-buffering", bufMode); + return channel; +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_GetOpenFile -- + * + * Given a name of a channel registered in the given interpreter, + * returns a FILE * for it. + * + * Results: + * A standard Tcl result. If the channel is registered in the given + * interpreter and it is managed by the "file" channel driver, and + * it is open for the requested mode, then the output parameter + * filePtr is set to a FILE * for the underlying file. On error, the + * filePtr is not set, TCL_ERROR is returned and an error message is + * left in the interp's result. + * + * Side effects: + * May invoke fdopen to create the FILE * for the requested file. + * + *---------------------------------------------------------------------- + */ + +EXPORT_C int +Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) + Tcl_Interp *interp; /* Interpreter in which to find file. */ + CONST char *string; /* String that identifies file. */ + int forWriting; /* 1 means the file is going to be used + * for writing, 0 means for reading. */ + int checkUsage; /* 1 means verify that the file was opened + * in a mode that allows the access specified + * by "forWriting". Ignored, we always + * check that the channel is open for the + * requested mode. */ + ClientData *filePtr; /* Store pointer to FILE structure here. */ +{ + Tcl_Channel chan; + int chanMode; + Tcl_ChannelType *chanTypePtr; + ClientData data; + int fd; + FILE *f; + + chan = Tcl_GetChannel(interp, string, &chanMode); + if (chan == (Tcl_Channel) NULL) { + return TCL_ERROR; + } + if ((forWriting) && ((chanMode & TCL_WRITABLE) == 0)) { + Tcl_AppendResult(interp, + "\"", string, "\" wasn't opened for writing", (char *) NULL); + return TCL_ERROR; + } else if ((!(forWriting)) && ((chanMode & TCL_READABLE) == 0)) { + Tcl_AppendResult(interp, + "\"", string, "\" wasn't opened for reading", (char *) NULL); + return TCL_ERROR; + } + + /* + * We allow creating a FILE * out of file based, pipe based and socket + * based channels. We currently do not allow any other channel types, + * because it is likely that stdio will not know what to do with them. + */ + + chanTypePtr = Tcl_GetChannelType(chan); + if ((chanTypePtr == &fileChannelType) +#ifdef SUPPORTS_TTY + || (chanTypePtr == &ttyChannelType) +#endif /* SUPPORTS_TTY */ + || (chanTypePtr == &tcpChannelType) + || (strcmp(chanTypePtr->typeName, "pipe") == 0)) { + if (Tcl_GetChannelHandle(chan, + (forWriting ? TCL_WRITABLE : TCL_READABLE), + (ClientData*) &data) == TCL_OK) { + fd = (int) data; + + /* + * The call to fdopen below is probably dangerous, since it will + * truncate an existing file if the file is being opened + * for writing.... + */ + + f = fdopen(fd, (forWriting ? "w" : "r")); + if (f == NULL) { + Tcl_AppendResult(interp, "cannot get a FILE * for \"", string, + "\"", (char *) NULL); + return TCL_ERROR; + } + *filePtr = (ClientData) f; + return TCL_OK; + } + } + + Tcl_AppendResult(interp, "\"", string, + "\" cannot be used to get a FILE *", (char *) NULL); + return TCL_ERROR; +} + +/* + *---------------------------------------------------------------------- + * + * TclUnixWaitForFile -- + * + * This procedure waits synchronously for a file to become readable + * or writable, with an optional timeout. + * + * Results: + * The return value is an OR'ed combination of TCL_READABLE, + * TCL_WRITABLE, and TCL_EXCEPTION, indicating the conditions + * that are present on file at the time of the return. This + * procedure will not return until either "timeout" milliseconds + * have elapsed or at least one of the conditions given by mask + * has occurred for file (a return value of 0 means that a timeout + * occurred). No normal events will be serviced during the + * execution of this procedure. + * + * Side effects: + * Time passes. + * + *---------------------------------------------------------------------- + */ + +int +TclUnixWaitForFile(fd, mask, timeout) + int fd; /* Handle for file on which to wait. */ + int mask; /* What to wait for: OR'ed combination of + * TCL_READABLE, TCL_WRITABLE, and + * TCL_EXCEPTION. */ + int timeout; /* Maximum amount of time to wait for one + * of the conditions in mask to occur, in + * milliseconds. A value of 0 means don't + * wait at all, and a value of -1 means + * wait forever. */ +{ + Tcl_Time abortTime = {0, 0}, now; /* silence gcc 4 warning */ + struct timeval blockTime, *timeoutPtr; + int index, numFound, result = 0; + fd_mask bit; + fd_mask readyMasks[3*MASK_SIZE]; + /* This array reflects the readable/writable + * conditions that were found to exist by the + * last call to select. */ + + /* + * If there is a non-zero finite timeout, compute the time when + * we give up. + */ + + if (timeout > 0) { + Tcl_GetTime(&now); + abortTime.sec = now.sec + timeout/1000; + abortTime.usec = now.usec + (timeout%1000)*1000; + if (abortTime.usec >= 1000000) { + abortTime.usec -= 1000000; + abortTime.sec += 1; + } + timeoutPtr = &blockTime; + } else if (timeout == 0) { + timeoutPtr = &blockTime; + blockTime.tv_sec = 0; + blockTime.tv_usec = 0; + } else { + timeoutPtr = NULL; + } + + /* + * Initialize the ready masks and compute the mask offsets. + */ + + if (fd >= FD_SETSIZE) { + panic("TclWaitForFile can't handle file id %d", fd); + } + memset((VOID *) readyMasks, 0, 3*MASK_SIZE*sizeof(fd_mask)); + index = fd/(NBBY*sizeof(fd_mask)); + bit = ((fd_mask) 1) << (fd%(NBBY*sizeof(fd_mask))); + + /* + * Loop in a mini-event loop of our own, waiting for either the + * file to become ready or a timeout to occur. + */ + + while (1) { + if (timeout > 0) { + blockTime.tv_sec = abortTime.sec - now.sec; + blockTime.tv_usec = abortTime.usec - now.usec; + if (blockTime.tv_usec < 0) { + blockTime.tv_sec -= 1; + blockTime.tv_usec += 1000000; + } + if (blockTime.tv_sec < 0) { + blockTime.tv_sec = 0; + blockTime.tv_usec = 0; + } + } + + /* + * Set the appropriate bit in the ready masks for the fd. + */ + + if (mask & TCL_READABLE) { + readyMasks[index] |= bit; + } + if (mask & TCL_WRITABLE) { + (readyMasks+MASK_SIZE)[index] |= bit; + } + if (mask & TCL_EXCEPTION) { + (readyMasks+2*(MASK_SIZE))[index] |= bit; + } + + /* + * Wait for the event or a timeout. + */ + + numFound = select(fd+1, (SELECT_MASK *) &readyMasks[0], + (SELECT_MASK *) &readyMasks[MASK_SIZE], + (SELECT_MASK *) &readyMasks[2*MASK_SIZE], timeoutPtr); + if (numFound == 1) { + if (readyMasks[index] & bit) { + result |= TCL_READABLE; + } + if ((readyMasks+MASK_SIZE)[index] & bit) { + result |= TCL_WRITABLE; + } + if ((readyMasks+2*(MASK_SIZE))[index] & bit) { + result |= TCL_EXCEPTION; + } + result &= mask; + if (result) { + break; + } + } + if (timeout == 0) { + break; + } + if (timeout < 0) { + continue; + } + + /* + * The select returned early, so we need to recompute the timeout. + */ + + Tcl_GetTime(&now); + if ((abortTime.sec < now.sec) + || ((abortTime.sec == now.sec) + && (abortTime.usec <= now.usec))) { + break; + } + } + return result; +} + +#ifdef DEPRECATED +/* + *---------------------------------------------------------------------- + * + * FileThreadActionProc -- + * + * Insert or remove any thread local refs to this channel. + * + * Results: + * None. + * + * Side effects: + * Changes thread local list of valid channels. + * + *---------------------------------------------------------------------- + */ + +static void +FileThreadActionProc (instanceData, action) + ClientData instanceData; + int action; +{ + ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); + FileState *fsPtr = (FileState *) instanceData; + + if (action == TCL_CHANNEL_THREAD_INSERT) { + fsPtr->nextPtr = tsdPtr->firstFilePtr; + tsdPtr->firstFilePtr = fsPtr; + } else { + FileState **nextPtrPtr; + int removed = 0; + + for (nextPtrPtr = &(tsdPtr->firstFilePtr); (*nextPtrPtr) != NULL; + nextPtrPtr = &((*nextPtrPtr)->nextPtr)) { + if ((*nextPtrPtr) == fsPtr) { + (*nextPtrPtr) = fsPtr->nextPtr; + removed = 1; + break; + } + } + + /* + * This could happen if the channel was created in one + * thread and then moved to another without updating + * the thread local data in each thread. + */ + + if (!removed) { + panic("file info ptr not on thread channel list"); + } + } +} +#endif /* DEPRECATED */ +