diff -r 000000000000 -r bde4ae8d615e os/boardsupport/haitest/bspsvs/suite/bsp/mmc/testdata/devlon52/sd/t_sd.ini
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/os/boardsupport/haitest/bspsvs/suite/bsp/mmc/testdata/devlon52/sd/t_sd.ini	Fri Jun 15 03:10:57 2012 +0200
@@ -0,0 +1,140 @@
+# This is the global environment file to configure the MMC/SD on device specific
+# The current default MMC/SD card values are configured for Devlon52 device.
+# Licencees may need to configure below values to specific devices 
+
+#Logical Device Driver developed to test MMC/SD controller 
+[logicaldevice]
+lddname			=D_MMCSDIF
+
+[stack]
+# Stack Number- Symbian Stack supports only Single cards at a time
+stackno			=0
+
+[cardinfo]
+# Card Number
+cardnumber		=0
+
+[psuinfo]
+# Power Supply information supported by the platform
+
+# OCR from 3.1V to 3.2V (H4 voltage is 3.11V)
+#voltage in OCR Register 32 Bit Format (Hexa Decimal)
+supported_voltage	=0x00040000
+
+#Current in MicroAmps
+current			=0
+
+#Voltage Interval
+voltageinterval		=0
+
+#Voltage Check
+voltagecheck		=EDPsuChkComparator
+
+#Inactivity count
+inactivitycount		=0
+
+#Notlockedcount
+notlockedcount		=0
+#Timeout for PowerDown in seconds
+psuinactivitytimeOut	=4
+
+#Bus not locked timeout period, in seconds
+notlockedtimeOut	=0
+#Lock State
+lockstate		=EFalse
+
+#Psu OFF
+psuoff			=ETrue
+
+[busstate]
+cardbusstate		=EBusOff			
+[powersupply]
+#power supply unit number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
+unit			=0
+
+#Psu current Limit IsSafe? ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
+curlimit		=0
+
+
+#power supply state
+initvccstate		=EDPsuOff
+
+[mediachange]
+#Media Change Number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
+mcID			=0
+[mediastate]
+#Initial Media State
+initialstate		=EClosed
+
+#Force Media Change support
+forcedstate		=EOpened
+#Standbymode ON/OFF
+standbymode 		=EFalse
+
+#Replay Event Counts
+eventcount		=0
+
+#Bus type
+bustype			=0
+
+[bufferinfo]
+#buflen
+buflen			=69632
+
+[machineinfo]
+#machineinfo
+expectedtotalsockets			=1
+expectedtotalmediachanges		=0
+expectedtotalprimarysupplies		=0
+expectedbasebusnumber			=0
+expectedspimode				=FALSE
+hasflagsupportsspimode			=FALSE
+hasflagsupportsdoublebuffering		=FALSE
+hasflagsupportsr7			=FALSE
+hasflagmaxtransferlength256k		=FALSE
+hasflagmaxtransferlength512k		=FALSE
+hasflagmaxtransferlength1m		=FALSE
+hasflagmaxtransferlength2m		=FALSE
+hasflagmaxtransferlength4m		=FALSE
+hasflagmaxtransferlength8m		=FALSE
+hasflagmaxtransferlength16m		=FALSE
+hasflagdma8bitaddressing		=FALSE
+hasflagdma16bitaddressing		=TRUE
+hasflagdma32bitaddressing		=FALSE
+hasflagdma64bitaddressing		=FALSE
+hasflagsupportsdma			=TRUE
+
+[partialreadinfo]
+#partialreadinfo
+prdstart1				=0
+prdend1					=512
+expectedprdstart1			=0
+expectedprdend1				=1
+prdstart2				=0
+prdend2					=4096
+expectedprdstart2			=0
+expectedprdend2				=512
+prdstart3				=0
+prdend3					=256
+expectedprdstart3		=0
+expectedprdend3			=512
+
+prdstart4				=127
+prdend4					=719
+expectedprdstart4		=0
+expectedprdend4			=512
+
+
+[stacktests]
+#stacktests
+expectedasyncerror0004			=1
+expectedstateoff			=EPBusOff
+expectedstateon				=EPBusOn
+
+[devinfo]
+maxcards				=1
+programperiodms				=1
+
+[cardpdata]
+transferspeed				=90
+readcurrentinmilliamps 			=45