sl@0: # This is the global environment file to configure the MMC/SD on device specific
sl@0: # The current default MMC/SD card values are configured for TI OMAP 2420 (H4) hardware.
sl@0: # Licencees may need to configure below values to specific devices 
sl@0: 
sl@0: #Logical Device Driver developed to test MMC/SD controller 
sl@0: [logicaldevice]
sl@0: lddname			=D_MMCSDIF
sl@0: 
sl@0: [stack]
sl@0: # Stack Number- Symbian Stack supports only Single cards at a time
sl@0: stackno			=0
sl@0: 
sl@0: [cardinfo]
sl@0: # Card Number
sl@0: cardnumber		=0
sl@0: 
sl@0: [psuinfo]
sl@0: # Power Supply information supported by the platform
sl@0: 
sl@0: #OCR from 3.1V to 3.2V (H4 voltage is 3.11V)
sl@0: #voltage in OCR Register 32 Bit Format (Hexa Decimal)
sl@0: supported_voltage	=0x00080000
sl@0: 
sl@0: #Current in MicroAmps
sl@0: current			=0
sl@0: 
sl@0: #Voltage Interval
sl@0: voltageinterval		=0
sl@0: 
sl@0: #Voltage Check
sl@0: voltagecheck		=EDPsuChkComparator
sl@0: 
sl@0: #Inactivity count
sl@0: inactivitycount		=0
sl@0: 
sl@0: #Notlockedcount
sl@0: notlockedcount		=0
sl@0: 
sl@0: #Timeout for PowerDown in seconds
sl@0: psuinactivitytimeOut	=1
sl@0: 
sl@0: #Bus not locked timeout period, in seconds
sl@0: notlockedtimeOut	=3
sl@0: 
sl@0: #Lock State
sl@0: lockstate		=EFalse
sl@0: 
sl@0: #Psu OFF
sl@0: psuoff			=ETrue
sl@0: 
sl@0: [busstate]
sl@0: cardbusstate		=EBusOff			
sl@0: [powersupply]
sl@0: #power supply unit number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
sl@0: unit			=0
sl@0: 
sl@0: #Psu current Limit IsSafe? ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
sl@0: curlimit		=0
sl@0: 
sl@0: 
sl@0: #power supply state
sl@0: initvccstate		=EDPsuOff
sl@0: 
sl@0: [mediachange]
sl@0: #Media Change Number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
sl@0: mcID			=0
sl@0: 
sl@0: [mediastate]
sl@0: #Initial Media State
sl@0: initialstate		=EClosed
sl@0: 
sl@0: #Force Media Change support
sl@0: forcedstate		=EClosed
sl@0: 
sl@0: #Standbymode ON/OFF
sl@0: standbymode 		=EFalse
sl@0: 
sl@0: #Replay Event Counts
sl@0: eventcount		=0
sl@0: 
sl@0: #Bus type
sl@0: bustype			=0
sl@0: [bufferinfo]
sl@0: #buflen
sl@0: buflen			=135168
sl@0: 
sl@0: [machineinfo]
sl@0: #machineinfo
sl@0: expectedtotalsockets			=1
sl@0: expectedtotalmediachanges		=0
sl@0: expectedtotalprimarysupplies		=0
sl@0: expectedbasebusnumber			=0
sl@0: expectedspimode				=FALSE
sl@0: hasflagsupportsspimode			=FALSE
sl@0: hasflagsupportsdoublebuffering		=TRUE
sl@0: hasflagsupportsr7			=FALSE
sl@0: hasflagmaxtransferlength256k		=TRUE
sl@0: hasflagmaxtransferlength512k		=TRUE
sl@0: hasflagmaxtransferlength1m		=TRUE
sl@0: hasflagmaxtransferlength2m		=FALSE
sl@0: hasflagmaxtransferlength4m		=TRUE
sl@0: hasflagmaxtransferlength8m		=TRUE
sl@0: hasflagmaxtransferlength16m		=TRUE
sl@0: hasflagdma8bitaddressing		=FALSE
sl@0: hasflagdma16bitaddressing		=TRUE
sl@0: hasflagdma32bitaddressing		=FALSE
sl@0: hasflagdma64bitaddressing		=FALSE
sl@0: hasflagsupportsdma			=TRUE
sl@0: 
sl@0: [partialreadinfo]
sl@0: #partialreadinfo
sl@0: prdstart1				=0
sl@0: prdend1					=512
sl@0: expectedprdstart1		=0
sl@0: expectedprdend1			=512
sl@0: 
sl@0: prdstart2				=0
sl@0: prdend2					=4096
sl@0: expectedprdstart2			=0
sl@0: expectedprdend2				=512
sl@0: 
sl@0: prdstart3				=0
sl@0: prdend3					=256
sl@0: expectedprdstart3		=0
sl@0: expectedprdend3			=512
sl@0: 
sl@0: prdstart4				=127
sl@0: prdend4					=719
sl@0: expectedprdstart4		=0
sl@0: expectedprdend4			=512
sl@0: 
sl@0: 
sl@0: [stacktests]
sl@0: #stacktests
sl@0: expectedasyncerror0004			=1
sl@0: expectedstateoff			=EPBusOff
sl@0: expectedstateon				=EPBusOn
sl@0: 
sl@0: [devinfo]
sl@0: maxcards				=1
sl@0: programperiodms				=1
sl@0: 
sl@0: [cardpdata]
sl@0: transferspeed				=50
sl@0: readcurrentinmilliamps 			=45