sl@0: //
sl@0: // Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
sl@0: // All rights reserved.
sl@0: // This component and the accompanying materials are made available
sl@0: // under the terms of "Eclipse Public License v1.0"
sl@0: // which accompanies this distribution, and is available
sl@0: // at the URL "http://www.eclipse.org/legal/epl-v10.html".
sl@0: //
sl@0: // Initial Contributors:
sl@0: // Nokia Corporation - initial contribution.
sl@0: //
sl@0: // Contributors:
sl@0: //
sl@0: // Description:
sl@0: //
sl@0: 
sl@0: LOAD_SUITE	T_mmcsd
sl@0: 
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0001
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0001
sl@0: //! @SYMAPI			User::LoadLogicalDevice(const TDesC {ref});
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		11/04/2008
sl@0: //! @SYMTestCaseDesc		Load Logical Device Driver.
sl@0: //! @SYMTestActions		Load D_MMCSDIF LDD Driver
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	KErrNone
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	LoadDriver		BASE-BSP-MMC-DRIVER-MANUALSocket-0001-001-LoadDriver_command02
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0001
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0002
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0002
sl@0: //! @SYMAPI			DMMCSocket::CardIsPresent();
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		11/04/2008
sl@0: //! @SYMTestCaseDesc		Card Is Present Test - Display if an MMC/SD card is present.
sl@0: //! @SYMTestActions		1. Create RMMCSDTestControllerInterface Handle object.
sl@0: //!				2. Open the driver connection
sl@0: //!				3. Ask user to make sure card in is drive
sl@0: //!				4. Check that a card is present
sl@0: //!				5. Destroy the object
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	A card is present.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		CREATE_OBJECT	MMCSDSocket	mmcsdsocket1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-MMC-DRIVER-MANUALSocket-0002-001-DriverOpen_command01
sl@0: 		COMMAND		mmcsdsocket1	NewL			BASE-BSP-MMC-DRIVER-MANUALSocket-0002-001-NewL_command02
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0002-001-PromptUser_command03
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0002-001-CardIsPresent_command04
sl@0: 		COMMAND		mmcsdsession1	Close
sl@0: 		COMMAND		mmcsdsocket1	~
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0002
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0003
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0003
sl@0: //! @SYMAPI			DMMCSocket::CardIsPresent();
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		25/06/2008
sl@0: //! @SYMTestCaseDesc		Card Is Present Test - Display if an MMC/SD card is present.
sl@0: //! @SYMTestActions		1. Create RMMCSDTestControllerInterface Handle object.
sl@0: //!				2. Open the driver connection
sl@0: //!				3. Ask user to make sure card is not in drive
sl@0: //!				4. Check that a card is not present
sl@0: //!				5. Ask user to make sure card is in drive
sl@0: //!				6. Destroy the object
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	A card is not present.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		CREATE_OBJECT	MMCSDSocket	mmcsdsocket1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-MMC-DRIVER-MANUALSocket-0003-001-DriverOpen_command01
sl@0: 		COMMAND		mmcsdsocket1	NewL			BASE-BSP-MMC-DRIVER-MANUALSocket-0003-001-NewL_command02
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0003-001-PromptUser_command03
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0003-001-CardIsPresent_command04
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0003-001-PromptUser_command05
sl@0: 		COMMAND		mmcsdsession1	Close
sl@0: 		COMMAND		mmcsdsocket1	~
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0003
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0004
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0004
sl@0: //! @SYMAPI			DMMCSocket::CardIsPresent();
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		25/06/2008
sl@0: //! @SYMTestCaseDesc		Card Is Present Test - Display if an MMC/SD card is present.
sl@0: //! @SYMTestActions		1. Create RMMCSDTestControllerInterface Handle object.
sl@0: //!				2. Open the driver connection
sl@0: //!				3. Ask user to make sure card is in drive
sl@0: //!				4. Check that a card is present
sl@0: //!				5. Ask user to make sure card is not in drive
sl@0: //!				6. Check that a card is not present
sl@0: //!				7. Ask user to make sure card is in drive
sl@0: //!				8. Check that a card is present
sl@0: //!				9. Destroy the object
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	A card is not present.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		CREATE_OBJECT	MMCSDSocket	mmcsdsocket1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-DriverOpen_command01
sl@0: 		COMMAND		mmcsdsocket1	NewL			BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-NewL_command02
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-PromptUser_command03
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-CardIsPresent_command04
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-PromptUser_command05
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-CardIsPresent_command06
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-PromptUser_command07
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0004-001-CardIsPresent_command08
sl@0: 		COMMAND		mmcsdsession1	Close
sl@0: 		COMMAND		mmcsdsocket1	~
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0004
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0005
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0005
sl@0: //! @SYMAPI			DMMCSocket::CardIsPresent();
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		25/06/2008
sl@0: //! @SYMTestCaseDesc		Card Is Present Test - Display if an MMC/SD card is present after reset.
sl@0: //! @SYMTestActions    		1. Create RMMCSDTestControllerInterface Handle object.
sl@0: //!				2. Open the driver connection
sl@0: //!				3. Reset the socket by powering down the stack
sl@0: //!				4. Ask user to make sure card is in drive
sl@0: //!				5. Check that a card is present
sl@0: //!				6. Destroy the object
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	A card is present.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		CREATE_OBJECT	MMCSDSocket	mmcsdsocket1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-MMC-DRIVER-MANUALSocket-0005-001-DriverOpen_command01
sl@0: 		COMMAND		mmcsdsocket1	NewL			BASE-BSP-MMC-DRIVER-MANUALSocket-0005-001-NewL_command02
sl@0: 		COMMAND		mmcsdsocket1	Reset1
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0005-001-PromptUser_command04
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0005-001-CardIsPresent_command05
sl@0: 		COMMAND		mmcsdsession1	Close
sl@0: 		COMMAND		mmcsdsocket1	~
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0005
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0006
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0006
sl@0: //! @SYMAPI			DMMCSocket::CardIsPresent();
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		25/06/2008
sl@0: //! @SYMTestCaseDesc		Card Is Present Test - Display if an MMC/SD card is present after double reset.
sl@0: //! @SYMTestActions    		1. Create RMMCSDTestControllerInterface Handle object.
sl@0: //!				2. Open the driver connection
sl@0: //!				3. Reset the socket by powering down the stack
sl@0: //!				4. Reset the socket and free up allocated resources
sl@0: //!				5. Ask user to make sure card is in drive
sl@0: //!				6. Check that a card is present
sl@0: //!				7. Destroy the object
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	A card is present.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		CREATE_OBJECT	MMCSDSocket	mmcsdsocket1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-MMC-DRIVER-MANUALSocket-0006-001-DriverOpen_command01
sl@0: 		COMMAND		mmcsdsocket1	NewL			BASE-BSP-MMC-DRIVER-MANUALSocket-0006-001-NewL_command02
sl@0: 		COMMAND		mmcsdsocket1	Reset1
sl@0: 		COMMAND		mmcsdsocket1	Reset2
sl@0: 		COMMAND		mmcsdsocket1	utilityPromptMessage	BASE-BSP-MMC-DRIVER-MANUALSocket-0006-001-PromptUser_command05
sl@0: 		COMMAND		mmcsdsocket1	CardIsPresent		BASE-BSP-MMC-DRIVER-MANUALSocket-0006-001-CardIsPresent_command06
sl@0: 		COMMAND		mmcsdsession1	Close
sl@0: 		COMMAND		mmcsdsocket1	~
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0006
sl@0: 
sl@0: START_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0007
sl@0: //! @SYMTestCaseID		BASE-BSP-MMC-DRIVER-MANUALSocket-0007
sl@0: //! @SYMAPI			FreeLogicalDevice(const TDesC {ref});
sl@0: //! @SYMAuthor			James Mechen
sl@0: //! @SYMCreationDate		11/04/2008
sl@0: //! @SYMTestCaseDesc		Free the Logical Device Driver
sl@0: //! @SYMTestActions    		Free the D_MMCSDIF LDD Driver
sl@0: //! @SYMTestStatus		Implemented
sl@0: //! @SYMTestPriority		high
sl@0: //! @SYMTestExpectedResults	Displayed Power supply information.
sl@0: //! @SYMTestType		CIT
sl@0: 	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-MMC-SOCKET-DRIVER-MANUAL.ini
sl@0: 		CREATE_OBJECT	MMCSDSession	mmcsdsession1
sl@0: 		COMMAND		mmcsdsession1	NewL
sl@0: 		COMMAND		mmcsdsession1	UnLoadDriver		BASE-BSP-MMC-DRIVER-MANUALSocket-0007-001-UnLoadDriver_command02
sl@0: 		COMMAND		mmcsdsession1	~
sl@0: 	END_TEST_BLOCK
sl@0: END_TESTCASE			BASE-BSP-MMC-DRIVER-MANUALSocket-0007