os/boardsupport/haitest/bspsvs/suite/bsp/digitiser/scripts/base-bsp-digitiser-driver-manual.script
2 // Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
3 // All rights reserved.
4 // This component and the accompanying materials are made available
5 // under the terms of "Eclipse Public License v1.0"
6 // which accompanies this distribution, and is available
7 // at the URL "http://www.eclipse.org/legal/epl-v10.html".
9 // Initial Contributors:
10 // Nokia Corporation - initial contribution.
17 //! @SYMTestSuiteName base-bsp-digitiser-driver-manual
18 //! @SYMScriptTestEnvironment This test script requires a base port ROM
20 /////////////////////////////////////////////////////////////////////
21 // base-bsp-digitiser-driver-manual.script
22 // Tests the Digitiser via validation TRawEvents and mouse positions retrieved
23 // for pen touches on the digitiser screen.
24 // The tests are manual.
25 /////////////////////////////////////////////////////////////////////
27 LOAD_SUITE T_Digitiser
28 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0001
29 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0001
30 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
31 //! TRawEvent::EButton1Down;
32 //! TRawEvent::EPointerMove;
33 //! TRawEvent::EButton1Up
34 //! @SYMAuthor Rehana Anwar
35 //! @SYMCreationDate 03/04/2008
36 //! @SYMTestCaseDesc Set the display mode to default mode.
37 //! Wait for user to touch an unlimited number of random pixels on the screen with a stylus.
38 //! Highlight each pixel touch in black.
39 //! Wait for user to exit the screen by touching the exit box with stylus.
40 //! Allow user to manually confirm if test has passed or failed, via a key press.
41 //! @SYMTestActions 1. Set the displaymode to the default mode.
42 //! 2. Initialise and create the RConsole handle object.
43 //! 3. Wait for user to touch a random pixel on the screen with a stylus.
44 //! 4. Highlight that pixel touch in black immediately.
45 //! 5. repeat steps 3 & 4, until step 5 is processed.
46 //! 6. Wait for user to touch the black exit box, then exit the test scenario
47 //! 7. Wait for user to validate if testcase has passed or failed, via a keypress
48 //! (pass is dependant on the pass keypress see configuration file)
49 //! 8. Clean up and Destroy the RConsole Handle object.
50 //! @SYMTestStatus Implemented
51 //! @SYMTestPriority High
52 //! @SYMTestExpectedResults The user will manually verify that the test has passed, via a configurable keypress.
54 START_TEST_BLOCK 100 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
55 CREATE_OBJECT HalData digitiser1
56 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
57 CREATE_OBJECT RConsole console1
59 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
60 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
61 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0001-Instructions
62 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0001-Read
65 COMMAND console1 ClearScreen
66 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0001-WriteFeedback
67 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
69 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
70 COMMAND console1 Destroy
71 COMMAND console1 Close
74 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0001
76 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0002
77 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0002
78 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
79 //! TRawEvent::EButton1Down;
80 //! TRawEvent::EPointerMove;
81 //! TRawEvent::EButton1Up
82 //! @SYMAuthor Rehana Anwar
83 //! @SYMCreationDate 03/04/2008
84 //! @SYMTestCaseDesc Set the display mode to default mode.
85 //! Wait for user to draw a straight line on the screen with a stylus.
86 //! Highlight each pixel touch in black.
87 //! Wait for user to exit the screen by touching the exit box with stylus.
88 //! Allow user to manually confirm if test has passed or failed, via a key press.
89 //! @SYMTestActions 1. Set the displaymode to the default mode.
90 //! 2. Initialise and create the RConsole handle object.
91 //! 3. Wait for user to touch and draw a line on the screen with a stylus.
92 //! 4. Highlight that pixel touch in black immediately.
93 //! 5. Wait for user to touch the black exit box, then exit the test scenario
94 //! 6. Wait for user to validate if testcase has passed or failed, via a keypress
95 //! (pass is dependant on the pass keypress see configuration file)
96 //! 7. Clean up and Destroy the RConsole Handle object.
97 //! @SYMTestStatus Implemented
98 //! @SYMTestPriority High
99 //! @SYMTestExpectedResults The user will manually verify that the test has passed, via a configurable keypress.
101 START_TEST_BLOCK 100 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
102 CREATE_OBJECT HalData digitiser1
103 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
104 CREATE_OBJECT RConsole console1
106 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
107 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
108 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0002-Instructions
109 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0002-Read
112 COMMAND console1 ClearScreen
113 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0002-WriteFeedback
114 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
116 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
117 COMMAND console1 Destroy
118 COMMAND console1 Close
121 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0002
123 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0003
124 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0003
125 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
126 //! TRawEvent::EButton1Down;
127 //! TRawEvent::EPointerMove;
128 //! TRawEvent::EButton1Up
129 //! @SYMAuthor Rehana Anwar
130 //! @SYMCreationDate 03/04/2008
131 //! @SYMTestCaseDesc Set the display mode to default mode.
132 //! Wait for user to touch an predefined pixels on the screen with a stylus.
133 //! (these predefined pixels are configurable).
134 //! Highlight each pixel touch in black.
135 //! Validate each pixel position and event recieved.
136 //! Position validation comparison is dependant on the
137 //! margin of error in pixels defined by the user. For example
138 //! a zero margin of error defines that the user has to match the exact pixel when
139 //! touching the screen). This testcase uses a margin of error of 10 pixels,
140 //! in both horizontal and vertical directions. This margin is configurable.
141 //! Validations are also made on the expected TRawEvent. This is the respective
142 //! down event and the respective up event when touching a pixel
143 //! on the digitiser screen. This test case expects the following TRawEvents
144 //! TRawEvent::EButton1Down (a pen down event) and TRawEvent::EButton1Up (a pen move event).
145 //! This testcase may also recieve a move event, this occurs if the digitser is sensitive, move events map to the TRawEvent
146 //! TRawEvent::EPointerMove(a pen move event),if this occurs move events are ignored.
147 //! Wait for user to exit the screen by touching the exit box with stylus.
148 //! @SYMTestActions 1. Set the displaymode to the default mode
149 //! 2. Initialise and create the RConsole handle object.
150 //! 3. Read in a predefined pixel.
151 //! 4. Draw first pixel on onto the screen
152 //! 5. Wait for the user to touch the pixel on the screen
153 //! 6. Store TRawEvent triggered and mouse positions.
154 //! 7. Draw the next predefined pixel on to the screen.
155 //! 8. Repeat steps 3-5 until predefined pixels have all been drawn
156 //! or until user presses the black exit box.
157 //! 9. Compare users pixel co-ordinates and TRawEvents triggered.
158 //! 10. Clean up and Destroy the RConsole Handle object.
160 //! @SYMTestStatus Implemented
161 //! @SYMTestPriority High
162 //! @SYMTestExpectedResults The TRawEvent:EButton1Down and TRawEvent::EButton1Up are recieved
163 //! in that order for each pixel touch on the digitiser. If the digitser is sensitive move event(s)
164 //! TRawEvent::EPointerMove, may be recieved in between each pen down and pen up event, this is ignored.
165 //! Pixel co-ordinates match with expected pixels respective to the margin of error used.
167 START_TEST_BLOCK 5000 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
168 CREATE_OBJECT HalData digitiser1
169 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
170 CREATE_OBJECT RConsole console1
172 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
173 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
174 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0003-Instructions
175 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0003-Read
178 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
179 COMMAND console1 Destroy
180 COMMAND console1 Close
183 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0003
185 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0004
186 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0004
187 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
188 //! TRawEvent::EButton1Down;
189 //! TRawEvent::EPointerMove;
190 //! TRawEvent::EButton1Up
191 //! @SYMAuthor Rehana Anwar
192 //! @SYMCreationDate 03/04/2008
193 //! @SYMTestCaseDesc Set the display mode to default mode.
194 //! Draw a predefined (configurable) bounding rectangle on the screen and wait for
195 //! user to draw a line within this rectangle. Highlight this line drawn in black.
196 //! Validate that all mouse positions retrieved are within this bounding rectangle.
197 //! ( Please note that this comparison is dependant on the
198 //! bounding rectangle).
199 //! Validate each event recieved when drawing this line. This is the respective
200 //! down event, move event and up event. We should recieve events in this order
201 //! TRawEvent::EButton1Down, TRawEvent::EPointerMove and TRawEvent::EButton1Up,
202 //! with the number of move events as unknown quantity, but a minumum of one.
203 //! @SYMTestActions 1. Set the displaymode to the default mode
204 //! 2. Initialise and create the RConsole handle object.
205 //! 3. Read in a predefined configurable bounding rectangle.
206 //! 4. Draw this rectangle on onto the screen.
207 //! 5. Wait for the user to draw a line within this bounding rectangle.
208 //! 6. Compare users pixel co-ordinates and TRawEvents triggered with expected.
209 //! 7. Wait for the user to touch the ethe black exit box.
210 //! 8. Clean up and Destroy the RConsole Handle object.
211 //! @SYMTestStatus Implemented
212 //! @SYMTestPriority High
213 //! @SYMTestExpectedResults The TRawEvent::EButton1Down, TRawEvent::EPointerMove, TRawEvent::EButton1Up are recieved
214 //! in that order on the line, the number of TRawEvent::EPointerMove recieved, after a TRawEvent::EButton1Down event
216 //! Pixel co-ordinates are withing the bounding rectangle.
218 START_TEST_BLOCK 400 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
219 CREATE_OBJECT HalData digitiser1
220 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
221 CREATE_OBJECT RConsole console1
223 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
224 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
225 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0004-Instructions
226 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0004-Read
229 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
230 COMMAND console1 Destroy
231 COMMAND console1 Close
234 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0004
236 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0005
237 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0005
238 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
239 //! Hal::Set(EPenState, TInt);
240 //! TDigitiserHalFunction::EDigitiserHalXYState;
241 //! @SYMAuthor Rehana Anwar
242 //! @SYMCreationDate 03/04/2008
243 //! @SYMTestCaseDesc Pen State Manual Test
244 //! Set the display mode to default mode.
245 //! Disable the the Pen State for the digitiser.
246 //! Wait for a pen event to be recieved.
247 //! Validate with user if pen event was recieved,and to fail the test if it was.
248 //! Uses API elements: HAL::Set, EDigitiserHalXYState
249 //! @SYMTestActions 1. Set the displaymode to the default mode
250 //! 2. Initialise and create the RConsole handle object.
251 //! 3. Disable the EPenState (value is 0) using HAL:Set.
252 //! 4. Get EPenState using HAL::Get,and validate that it is disabled in step 3.
253 //! 5. Wait for user to touch the digitiser. No TRawEvent should be triggered
254 //! Read should timeout.
255 //! 6. If in step 5 a TRawevent is triggered highlight the pixel touched.
256 //! 7. Wait for user to validate if testcase has passed or failed, via a keypress
257 //! (pass is dependant on the pass keypress see configuration file)
258 //! 8. Clean up and Destroy the RConsole Handle object.
259 //! @SYMTestStatus Implemented
260 //! @SYMTestPriority High
261 //! @SYMTestExpectedResults Digitiser State (touch Screen state) is disabled. Read should timeout and cancel with
262 //! a -3 AsyncError code. No TRawEvent should be triggered.
264 START_TEST_BLOCK 300 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
265 CREATE_OBJECT HalData digitiser1
266 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
267 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0005-PenState
268 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0005-PenState
269 CREATE_OBJECT RConsole console1
271 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
272 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
273 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0005-PenState
274 COMMAND !AsyncError=-3 console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0005-PenState
276 COMMAND console1 ClearScreen
277 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0005-WriteFeedback
278 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
279 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
281 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
282 COMMAND console1 Destroy
283 COMMAND console1 Close
286 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0005
288 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0006
289 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0006
290 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
291 //! HAL::Set(EPenState, TInt);
292 //! HAL::Get(EPenState, TInt{ref}) ;
293 //! TDigitiserHalFunction::EDigitiserHalXYState;
294 //! TRawEvent::EButton1Down;
295 //! TRawEvent::EButton1Up
296 //! @SYMAuthor Rehana Anwar
297 //! @SYMCreationDate 03/04/2008
298 //! @SYMTestCaseDesc Pen State Test
299 //! Set the display mode to default mode.
300 //! Enable the the Pen State for the digitiser.
301 //! Wait for a pen event to be recieved.
302 //! Validate with user if pen event was recieved and to pass the test, if it was.
303 //! Uses API elements: HAL::Set, EDigitiserHalXYState
304 //! @SYMTestActions 1. Set the displaymode to the default mode
305 //! 2. Initialise and create the RConsole handle object.
306 //! 3. Enable the EPenState (value is 1) using HAL:Set.
307 //! 4. Get EPenState using HAL::Get, and validate that it is enabled (value is 1) in step 4.
308 //! 5. Wait for user to touch the digitiser (A TRawEvent should be triggered).
309 //! and the Read should NOT timeout.
310 //! 6. If in step 5 a TRawevent is triggered highlight the pixel touched.
311 //! 7. Wait for user to validate if testcase has passed or failed, via a keypress
312 //! (pass is dependant on the pass keypress see configuration file)
313 //! 8. Clean up and Destroy the RConsole Handle object.
314 //! @SYMTestStatus Implemented
315 //! @SYMTestPriority High
316 //! @SYMTestExpectedResults Digitiser State (touch Screen state) is enabled. A TRawEvent should be triggered,
317 //! highlighting the pixel touched.
318 //! Read should NOT timeout
320 START_TEST_BLOCK 300 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
321 CREATE_OBJECT HalData digitiser1
322 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
323 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0006-PenState
324 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0006-PenState
325 CREATE_OBJECT RConsole console1
327 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
328 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
329 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0006-PenState
330 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0006-PenState
332 COMMAND console1 ClearScreen
333 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0006-WriteFeedback
334 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
335 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
337 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
338 COMMAND console1 Destroy
339 COMMAND console1 Close
342 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0006
344 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0007
345 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0007
346 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
347 //! HAL::Set(EPenState, TInt);
348 //! HAL::Get(EPenState, TInt{ref});
349 //! HAL::Get(EPenClick, TInt{ref});
350 //! TSoundHalFunction::ESoundHalPointerClickEnabled
351 //! @SYMAuthor Rehana Anwar
352 //! @SYMCreationDate 03/04/2008
353 //! @SYMTestCaseDesc EPenClick Test
354 //! Set the display mode to default mode.
355 //! Digitiser should support production of click sound,
356 //! if retrieval of EPenClickState is value 1.
357 //! Confirm whether digitiser supports
358 //! production of click sound via the setting and retrieval of EPenClick value 0.
359 //! Uses API elements:HAL::Get, ESoundHalPointerClickEnabled
360 //! @SYMTestActions 1. Set the displaymode to the default mode
361 //! 2. Initialise and create the RConsole handle object.
362 //! 3. Enable the EPenClickState (value is 1) using HAL:Set
363 //! 4. Confirm the EPenClickState (value is 1) using HAL:Set
364 //! 5. Enable the EPenState (value is 1) using HAL:Set.
365 //! 6. Confirm the EPenState (value is 1) using HAL:Get.
366 //! 7. Set the click sound to on for pen tap's in digitiser and validate that it is as expected.
367 //! in step 8 & 9, using EPenClick value as 1, using HAL:Set
368 //! 8. Wait for user to touch the digitiser. (A TRawEvent should be triggered)
369 //! 9. If A TRawevent is triggered ask the user to validate if a click sound was not heard as
370 //! as EPenClick is value 0. Validation is via a keypress
371 //! (pass is dependant on the pass keypress see configuration file)
372 //! If no TrawEvent is triggered timeout the read in step 8 and fail the testcase.
373 //! 10. Clean up and Destroy the RConsole Handle object.
374 //! @SYMTestStatus Implemented
375 //! @SYMTestPriority High
376 //! @SYMTestExpectedResults Click sound is heard if EPenClick is enabled.
377 //! The device can produce a click sound.
379 START_TEST_BLOCK 300 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
380 CREATE_OBJECT HalData digitiser1
381 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
382 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-PenClickState
383 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0007-PenClick
384 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0007-PenClick
385 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EPenState_Setup
386 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EPenState_Setup
387 CREATE_OBJECT RConsole console1
389 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
390 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
391 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0007-PenClick
392 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0007-PenClick
394 COMMAND console1 ClearScreen
395 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0007-WriteFeedback
396 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
397 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
399 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
400 COMMAND console1 Destroy
401 COMMAND console1 Close
404 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0007
406 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0008
407 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0008
408 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
409 //! HAL::Set(EPenState, TInt);
410 //! HAL::Get(EPenState, TInt{ref});
411 //! HAL::Get(EPenClick, TInt{ref});
412 //! TSoundHalFunction::ESoundHalPointerClickEnabled
413 //! @SYMAuthor Rehana Anwar
414 //! @SYMCreationDate 03/04/2008
415 //! @SYMTestCaseDesc EPenClick Test
416 //! Set the display mode to default mode.
417 //! Digitiser should support production of click sound,
418 //! if retrieval of EPenClickState is value 1.
419 //! Confirm whether digitiser supports
420 //! production of click sound via the setting and retrieval of EPenClick value 0.
421 //! Uses API elements:HAL::Get, ESoundHalPointerClickEnabled
422 //! @SYMTestActions 1. Set the displaymode to the default mode
423 //! 2. Initialise and create the RConsole handle object.
424 //! 3. Enable the EPenClickState (value is 1) using HAL:Set
425 //! 4. Confirm the EPenClickState (value is 1) using HAL:Set
426 //! 5. Enable the EPenState (value is 1) using HAL:Set.
427 //! 6. Confirm the EPenState (value is 1) using HAL:Get.
428 //! 7. Set the click sound to off for pen tap's in digitiser and validate that it is as expected.
429 //! in step 8 & 9, using EPenClick value as 0, using HAL:Set
430 //! 8. Wait for user to touch the digitiser. (A TRawEvent should be triggered)
431 //! 9. If A TRawevent is triggered ask the user to validate if a click sound was not heard as
432 //! as EPenClick is value 0. Validation is via a keypress
433 //! (pass is dependant on the pass keypress see configuration file)
434 //! If no TrawEvent is triggered timeout the read in step 8 and fail the testcase.
435 //! 10. Clean up and Destroy the RConsole Handle object.
436 //! @SYMTestStatus Implemented
437 //! @SYMTestPriority High
438 //! @SYMTestExpectedResults Click sound is heard if EPenClick is enabled.
439 //! The device can produce a click sound.
440 //! @SYMTestStatus Implemented
441 //! @SYMTestPriority High
442 //! @SYMTestExpectedResults Click sound is heard if EPenClick is enabled, click sound is not heard if EPenClick is disabled.
443 //! The device cannot produce a click sound.
445 START_TEST_BLOCK 300 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
446 CREATE_OBJECT HalData digitiser1
447 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
448 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EPenState_Setup
449 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EPenState_Setup
450 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-PenClickState
451 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-PenClick
452 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-PenClick
453 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-Setup
454 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-Setup
455 CREATE_OBJECT RConsole console1
457 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
458 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
459 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-PenClick
460 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-PenClick
462 COMMAND console1 ClearScreen
463 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0008-WriteFeedback
464 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
465 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
467 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
468 COMMAND console1 Destroy
469 COMMAND console1 Close
472 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0008
474 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0011
475 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0011
476 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
477 //! HAL::Get(EPenDisplayOn, TInt{ref});
478 //! HAL::Set(EPenDisplayOn, TInt);
479 //! HAL::Set(EDisplayState,TInt);
480 //! HAL::Get(EDisplayState, TInt{ref});
481 //! TPowerHalFunction::EPowerHalPointerSwitchesOn;
482 //! TPowerHalFunction::EPowerHalSetPointerSwitchesOn
483 //! @SYMAuthor Rehana Anwar
484 //! @SYMCreationDate 03/04/2008
485 //! @SYMTestCaseDesc EPenDisplayOn Test
486 //! Set the display mode to default mode.
487 //! Set the pen tap state to enabled.
488 //! Retrieve the pen tap state. Delay the testcase by 9 seconds to cause the screen to switch off.
489 //! validate that a pen tap switches the display on, via a pen tap and user input.
490 //! Uses API elements:HAL::Get,EPowerHalSetPointerSwitchesOn,EPowerHalPointerSwitchesOn
491 //! @SYMTestActions 1. Set the displaymode to the default mode
492 //! 3. Set the DisplayState using Hal::Set to on
493 //! 4. Get the DisplayState using Hal::Set and confirm if on.
494 //! 5. Set EPenDisplayOn (pen tap state) to on using Hal::Set.
495 //! 6. Get EPenDisplayOn (pen tap state) using Hal::Get and validate that it is as expected.
496 //! 7. Wait for the maximum timeout speciifed to allow the display to switch off.
497 //! 8. Wait for user to touch the digitiser. (A TRawEvent should be triggered).
498 //! 9. If A TRawevent is triggered, validate the display state,
499 //! by asking the user to validate if a pen tap switched the display on.
500 //! User validation is via a keypress (pass is dependant on the pass keypress see configuration file).
501 //! If no TrawEvent is triggered timeout the read in step 8 and fail the test.
502 //! 10. Set the DisplayState using Hal::Set to on
503 //! 11. Get the DisplayState using Hal::Get and confirm if on.
504 //! 12. Destroy the HAL Handle object.
505 //! @SYMTestStatus Implemented
506 //! @SYMTestPriority High
507 //! @SYMTestExpectedResults A Pen tap or press enables the display.
509 START_TEST_BLOCK 500 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
510 CREATE_OBJECT HalData digitiser1
511 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
512 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
513 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
514 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0011-EPenDisplayOn
515 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0011-EPenDisplayOn
516 CREATE_OBJECT RConsole console1
518 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
519 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
520 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0011-EPenDisplayOn
522 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOff
523 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOff
524 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0011-EPenDisplayOn
527 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
528 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
529 COMMAND console1 ClearScreen
530 COMMAND console1 ClearScreen
531 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0011-WriteFeedback
532 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
533 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
535 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
536 COMMAND console1 Destroy
537 COMMAND console1 Close
540 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0011
542 START_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0012
543 //! @SYMTestCaseID BASE-BSP-DIGITISER-DRIVER-MANUAL-0012
544 //! @SYMAPI HAL::Set(EDisplayMode, TInt);
545 //! HAL::Get(EPenDisplayOn, TInt{ref});
546 //! HAL::Set(EPenDisplayOn, TInt);
547 //! HAL::Set(EDisplayState,TInt);
548 //! HAL::Get(EDisplayState, TInt{ref});
549 //! TPowerHalFunction::EPowerHalPointerSwitchesOn;
550 //! TPowerHalFunction::EPowerHalSetPointerSwitchesOn
551 //! @SYMAuthor Rehana Anwar
552 //! @SYMCreationDate 03/04/2008
553 //! @SYMTestCaseDesc EPenDisplayOn Test
554 //! Set the display mode to default mode.
555 //! Set the pen tap state to disabled.
556 //! Retrieve the pen tap state. Delay the testcase by 9 seconds to cause the screen to switch off.
557 //! Validate that a pen tap does not switch the display on, via a pen tap and user input.
558 //! Uses API elements:HAL::Get,EPowerHalSetPointerSwitchesOn,EPowerHalPointerSwitchesOn
559 //! @SYMTestActions 1. Set the displaymode to the default mode
560 //! 3. Set the DisplayState using Hal::Set to on
561 //! 4. Get the DisplayState using Hal::Get and confirm if on.
562 //! 5. Set EPenDisplayOn (pen tap state) to off using Hal::Set.
563 //! 6. Get EPenDisplayOn (pen tap state) using Hal::Get and validate that it is as expected.
564 //! 7. Wait for the maximum timeout speciifed to allow the display to switch off.
565 //! 8. Wait for user to touch the digitiser. (A TRawEvent should be not be triggered).
566 //! 9. If A TRawevent is triggered, fail the testcase,
567 //! by asking the user to validate if a pen tap switched the display on.
568 //! User validation is via a keypress (pass is dependant on the pass keypress see configuration file).
569 //! If no TrawEvent is triggered timeout and cancel the read in step 8 and pass the test.
570 //! 10. Set the DisplayState using Hal::Set to on
571 //! 11. Get the DisplayState using Hal::Get and confirm if on.
572 //! 12. Destroy the HAL Handle object.
573 //! @SYMTestStatus Implemented
574 //! @SYMTestPriority High
575 //! @SYMTestExpectedResults A pen tap has no effect, on the display state
576 //! Read should timeout and cancel with
577 //! a -3 AsyncError code. No TRawEvent should be triggered.
579 START_TEST_BLOCK 500 T_Digitiser \base\digitiser\base-bsp-digitiser-driver-manual.ini
580 CREATE_OBJECT HalData digitiser1
581 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-DISPLAYMODE_MANUAL
582 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
583 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
584 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-0012-EPenDisplayOn
585 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-0012-EPenDisplayOn
586 CREATE_OBJECT RConsole console1
588 COMMAND console1 Init BASE-BSP-DIGITISER-DRIVER-MANUAL-Init
589 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-ControlOn
590 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0012-EPenDisplayOn
592 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOff
593 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOff
594 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-0012-EPenDisplayOn
597 COMMAND digitiser1 Set BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
598 COMMAND digitiser1 Get BASE-BSP-DIGITISER-DRIVER-MANUAL-EDisplayStateOn
599 COMMAND console1 ClearScreen
600 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-0012-WriteFeedback
601 COMMAND console1 Write BASE-BSP-DIGITISER-DRIVER-MANUAL-WriteFeedback
602 COMMAND console1 Read BASE-BSP-DIGITISER-DRIVER-MANUAL-ReadKey
604 COMMAND console1 Control BASE-BSP-DIGITISER-DRIVER-MANUAL-RAWMODEOFF
605 COMMAND console1 Destroy
606 COMMAND console1 Close
609 END_TESTCASE BASE-BSP-DIGITISER-DRIVER-MANUAL-0012