Symaptic: os/boardsupport/haitest/bspsvs/suite/bsp/uart/scripts/base-bsp-serial-driver-stress.script@260cb5ec6c19

     1 //

     2 // Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

     3 // All rights reserved.

     4 // This component and the accompanying materials are made available

     5 // under the terms of "Eclipse Public License v1.0"

     6 // which accompanies this distribution, and is available

     7 // at the URL "http://www.eclipse.org/legal/epl-v10.html".

     8 //

     9 // Initial Contributors:

    10 // Nokia Corporation - initial contribution.

    11 //

    12 // Contributors:

    13 //

    14 // Description:

    15 //

    16 //! @file

    17 //! @SYMTestSuiteName		base-bsp-serial-driver-stress_PORT<port>-<baud>

    18 //! @SYMScriptTestEnvironment	This test script requires a base port ROM

    20 /////////////////////////////////////////////////////////////////////

    21 // base-bsp-serial-driver-stress-PORT<port>-<baud>.script

    22 //

    23 //

    24 // Tests elements of the RBusDevComm

    25 // as a means of confidence that the HAI APIs work as expected.

    26 //

    27 // Tests are validated through environment settings found in the file t_serial.ini

    28 //

    29 // The purpose is to provide a regression test suite of publishedPartner APIs for RBusDevComm.

    30 // Negative testing is performed to confirm that correct errors are returned when incorrect parameters are given.

    31 // The tests are fully automated.

    32 /////////////////////////////////////////////////////////////////////

    34 LOAD_SUITE	t_serial

    37 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2001

    38 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2001

    39 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

    40 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

    41 //! @SYMAuthor			Louis Henry Nayegon

    42 //! @SYMCreationDate		10/04/2008

    43 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

    44 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

    45 //!					port		= com<port>

    46 //!					baud rate	= 9600

    47 //!					data bits	= 8

    48 //!					stop bits	= 1

    49 //!					parity		= none

    50 //!					flow control	= none

    51 //!				2. Change configuration

    52 //!					baud rate	= <baud>

    53 //!					data bits	= 8

    54 //!					stop bits	= 1

    55 //!					parity		= none

    56 //!					flow control	= rtscts

    57 //!				3. Send data to com port without specifying the length of the data

    58 //!				4. Read data from com port without specifying the length of the data

    59 //!				5. Restore configuration

    60 //!				6. Destroy the object

    61 //! @SYMTestStatus		Implemented

    62 //! @SYMTestPriority		High

    63 //! @SYMTestExpectedResults	Data read should be as expected

    64 //! @SYMTestType		CIT

    65 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

    66 		CREATE_OBJECT	RBusDevComm	busDevComm

    67 		CREATE_OBJECT	TCommConfigV01	configSave

    68 		CREATE_OBJECT	TCommConfigV01	config

    69 		COMMAND		busDevComm	new

    70 		COMMAND		configSave	new

    71 		COMMAND		config		new

    72 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

    73 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

    74 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

    75 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

    76 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

    77 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

    78 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

    79 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

    80 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

    82 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-none-rtscts-Write_config

    83 		OUTSTANDING

    84 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

    85 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

    86 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

    87 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

    88 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

    89 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

    90 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

    91 		OUTSTANDING

    93 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

    94 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

    95 		OUTSTANDING

    97 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

    98 		OUTSTANDING

    99 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   100 		COMMAND		busDevComm	Close

   101 		COMMAND		config		~

   102 		COMMAND		configSave	~

   103 		COMMAND		busDevComm	~

   104 	END_TEST_BLOCK

   105 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2001

   108 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2002

   109 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2002

   110 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   111 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   112 //! @SYMAuthor			Louis Henry Nayegon

   113 //! @SYMCreationDate		10/04/2008

   114 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   115 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   116 //!					port		= com<port>

   117 //!					baud rate	= 9600

   118 //!					data bits	= 8

   119 //!					stop bits	= 1

   120 //!					parity		= none

   121 //!					flow control	= none

   122 //!				2. Change configuration

   123 //!					baud rate	= <baud>

   124 //!					data bits	= 8

   125 //!					stop bits	= 1

   126 //!					parity		= none

   127 //!					flow control	= rtscts

   128 //!				3. Send data to com port specifying the length of the data

   129 //!				4. Read data from com port specifying the length of the data

   130 //!				5. Restore configuration

   131 //!				6. Destroy the object

   132 //! @SYMTestStatus		Implemented

   133 //! @SYMTestPriority		High

   134 //! @SYMTestExpectedResults	Data read should be as expected

   135 //! @SYMTestType		CIT

   136 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   137 		CREATE_OBJECT	RBusDevComm	busDevComm

   138 		CREATE_OBJECT	TCommConfigV01	configSave

   139 		CREATE_OBJECT	TCommConfigV01	config

   140 		COMMAND		busDevComm	new

   141 		COMMAND		configSave	new

   142 		COMMAND		config		new

   143 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   144 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   145 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   146 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   147 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   148 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   149 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   150 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   151 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   153 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-none-rtscts-Write_config

   154 		OUTSTANDING

   155 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   156 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   157 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   158 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

   159 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   160 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   161 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   162 		OUTSTANDING

   164 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   165 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   166 		OUTSTANDING

   168 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   169 		OUTSTANDING

   170 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   171 		COMMAND		busDevComm	Close

   172 		COMMAND		config		~

   173 		COMMAND		configSave	~

   174 		COMMAND		busDevComm	~

   175 	END_TEST_BLOCK

   176 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_rtscts-2002

   179 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2001

   180 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2001

   181 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   182 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   183 //! @SYMAuthor			Louis Henry Nayegon

   184 //! @SYMCreationDate		10/04/2008

   185 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   186 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   187 //!					port		= com<port>

   188 //!					baud rate	= 9600

   189 //!					data bits	= 8

   190 //!					stop bits	= 1

   191 //!					parity		= none

   192 //!					flow control	= none

   193 //!				2. Change configuration

   194 //!					baud rate	= <baud>

   195 //!					data bits	= 8

   196 //!					stop bits	= 2

   197 //!					parity		= none

   198 //!					flow control	= rtscts

   199 //!				3. Send data to com port without specifying the length of the data

   200 //!				4. Read data from com port without specifying the length of the data

   201 //!				5. Restore configuration

   202 //!				6. Destroy the object

   203 //! @SYMTestStatus		Implemented

   204 //! @SYMTestPriority		High

   205 //! @SYMTestExpectedResults	Data read should be as expected

   206 //! @SYMTestType		CIT

   207 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   208 		CREATE_OBJECT	RBusDevComm	busDevComm

   209 		CREATE_OBJECT	TCommConfigV01	configSave

   210 		CREATE_OBJECT	TCommConfigV01	config

   211 		COMMAND		busDevComm	new

   212 		COMMAND		configSave	new

   213 		COMMAND		config		new

   214 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   215 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   216 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   217 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   218 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   219 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   220 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   221 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   222 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   224 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-none-rtscts-Write_config

   225 		OUTSTANDING

   226 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   227 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   228 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   229 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

   230 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   231 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   232 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   233 		OUTSTANDING

   235 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   236 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   237 		OUTSTANDING

   239 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   240 		OUTSTANDING

   241 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   242 		COMMAND		busDevComm	Close

   243 		COMMAND		config		~

   244 		COMMAND		configSave	~

   245 		COMMAND		busDevComm	~

   246 	END_TEST_BLOCK

   247 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2001

   250 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2002

   251 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2002

   252 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   253 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   254 //! @SYMAuthor			Louis Henry Nayegon

   255 //! @SYMCreationDate		10/04/2008

   256 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   257 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   258 //!					port		= com<port>

   259 //!					baud rate	= 9600

   260 //!					data bits	= 8

   261 //!					stop bits	= 1

   262 //!					parity		= none

   263 //!					flow control	= none

   264 //!				2. Change configuration

   265 //!					baud rate	= <baud>

   266 //!					data bits	= 8

   267 //!					stop bits	= 2

   268 //!					parity		= none

   269 //!					flow control	= rtscts

   270 //!				3. Send data to com port specifying the length of the data

   271 //!				4. Read data from com port specifying the length of the data

   272 //!				5. Restore configuration

   273 //!				6. Destroy the object

   274 //! @SYMTestStatus		Implemented

   275 //! @SYMTestPriority		High

   276 //! @SYMTestExpectedResults	Data read should be as expected

   277 //! @SYMTestType		CIT

   278 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   279 		CREATE_OBJECT	RBusDevComm	busDevComm

   280 		CREATE_OBJECT	TCommConfigV01	configSave

   281 		CREATE_OBJECT	TCommConfigV01	config

   282 		COMMAND		busDevComm	new

   283 		COMMAND		configSave	new

   284 		COMMAND		config		new

   285 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   286 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   287 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   288 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   289 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   290 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   291 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   292 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   293 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   295 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-none-rtscts-Write_config

   296 		OUTSTANDING

   297 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   298 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   299 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   300 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

   301 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   302 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   303 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   304 		OUTSTANDING

   306 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   307 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   308 		OUTSTANDING

   310 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   311 		OUTSTANDING

   312 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   313 		COMMAND		busDevComm	Close

   314 		COMMAND		config		~

   315 		COMMAND		configSave	~

   316 		COMMAND		busDevComm	~

   317 	END_TEST_BLOCK

   318 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_rtscts-2002

   321 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2001

   322 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2001

   323 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   324 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   325 //! @SYMAuthor			Louis Henry Nayegon

   326 //! @SYMCreationDate		10/04/2008

   327 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   328 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   329 //!					port		= com<port>

   330 //!					baud rate	= 9600

   331 //!					data bits	= 8

   332 //!					stop bits	= 1

   333 //!					parity		= none

   334 //!					flow control	= none

   335 //!				2. Change configuration

   336 //!					baud rate	= <baud>

   337 //!					data bits	= 8

   338 //!					stop bits	= 1

   339 //!					parity		= even

   340 //!					flow control	= rtscts

   341 //!				3. Send data to com port without specifying the length of the data

   342 //!				4. Read data from com port without specifying the length of the data

   343 //!				5. Restore configuration

   344 //!				6. Destroy the object

   345 //! @SYMTestStatus		Implemented

   346 //! @SYMTestPriority		High

   347 //! @SYMTestExpectedResults	Data read should be as expected

   348 //! @SYMTestType		CIT

   349 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   350 		CREATE_OBJECT	RBusDevComm	busDevComm

   351 		CREATE_OBJECT	TCommConfigV01	configSave

   352 		CREATE_OBJECT	TCommConfigV01	config

   353 		COMMAND		busDevComm	new

   354 		COMMAND		configSave	new

   355 		COMMAND		config		new

   356 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   357 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   358 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   359 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   360 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   361 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   362 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   363 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   364 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   366 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-even-rtscts-Write_config

   367 		OUTSTANDING

   368 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   369 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   370 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   371 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

   372 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   373 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   374 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   375 		OUTSTANDING

   377 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   378 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   379 		OUTSTANDING

   381 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   382 		OUTSTANDING

   383 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   384 		COMMAND		busDevComm	Close

   385 		COMMAND		config		~

   386 		COMMAND		configSave	~

   387 		COMMAND		busDevComm	~

   388 	END_TEST_BLOCK

   389 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2001

   392 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2002

   393 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2002

   394 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   395 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   396 //! @SYMAuthor			Louis Henry Nayegon

   397 //! @SYMCreationDate		10/04/2008

   398 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   399 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   400 //!					port		= com<port>

   401 //!					baud rate	= 9600

   402 //!					data bits	= 8

   403 //!					stop bits	= 1

   404 //!					parity		= none

   405 //!					flow control	= none

   406 //!				2. Change configuration

   407 //!					baud rate	= <baud>

   408 //!					data bits	= 8

   409 //!					stop bits	= 1

   410 //!					parity		= even

   411 //!					flow control	= rtscts

   412 //!				3. Send data to com port specifying the length of the data

   413 //!				4. Read data from com port specifying the length of the data

   414 //!				5. Restore configuration

   415 //!				6. Destroy the object

   416 //! @SYMTestStatus		Implemented

   417 //! @SYMTestPriority		High

   418 //! @SYMTestExpectedResults	Data read should be as expected

   419 //! @SYMTestType		CIT

   420 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   421 		CREATE_OBJECT	RBusDevComm	busDevComm

   422 		CREATE_OBJECT	TCommConfigV01	configSave

   423 		CREATE_OBJECT	TCommConfigV01	config

   424 		COMMAND		busDevComm	new

   425 		COMMAND		configSave	new

   426 		COMMAND		config		new

   427 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   428 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   429 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   430 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   431 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   432 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   433 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   434 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   435 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   437 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-even-rtscts-Write_config

   438 		OUTSTANDING

   439 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   440 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   441 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   442 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

   443 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   444 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   445 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   446 		OUTSTANDING

   448 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   449 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   450 		OUTSTANDING

   452 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   453 		OUTSTANDING

   454 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   455 		COMMAND		busDevComm	Close

   456 		COMMAND		config		~

   457 		COMMAND		configSave	~

   458 		COMMAND		busDevComm	~

   459 	END_TEST_BLOCK

   460 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_rtscts-2002

   463 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2001

   464 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2001

   465 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   466 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   467 //! @SYMAuthor			Louis Henry Nayegon

   468 //! @SYMCreationDate		10/04/2008

   469 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   470 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   471 //!					port		= com<port>

   472 //!					baud rate	= 9600

   473 //!					data bits	= 8

   474 //!					stop bits	= 1

   475 //!					parity		= none

   476 //!					flow control	= none

   477 //!				2. Change configuration

   478 //!					baud rate	= <baud>

   479 //!					data bits	= 8

   480 //!					stop bits	= 2

   481 //!					parity		= even

   482 //!					flow control	= rtscts

   483 //!				3. Send data to com port without specifying the length of the data

   484 //!				4. Read data from com port without specifying the length of the data

   485 //!				5. Restore configuration

   486 //!				6. Destroy the object

   487 //! @SYMTestStatus		Implemented

   488 //! @SYMTestPriority		High

   489 //! @SYMTestExpectedResults	Data read should be as expected

   490 //! @SYMTestType		CIT

   491 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   492 		CREATE_OBJECT	RBusDevComm	busDevComm

   493 		CREATE_OBJECT	TCommConfigV01	configSave

   494 		CREATE_OBJECT	TCommConfigV01	config

   495 		COMMAND		busDevComm	new

   496 		COMMAND		configSave	new

   497 		COMMAND		config		new

   498 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   499 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   500 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   501 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   502 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   503 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   504 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   505 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   506 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   508 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-even-rtscts-Write_config

   509 		OUTSTANDING

   510 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   511 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   512 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   513 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

   514 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   515 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   516 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   517 		OUTSTANDING

   519 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   520 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   521 		OUTSTANDING

   523 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   524 		OUTSTANDING

   525 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   526 		COMMAND		busDevComm	Close

   527 		COMMAND		config		~

   528 		COMMAND		configSave	~

   529 		COMMAND		busDevComm	~

   530 	END_TEST_BLOCK

   531 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2001

   534 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2002

   535 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2002

   536 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   537 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   538 //! @SYMAuthor			Louis Henry Nayegon

   539 //! @SYMCreationDate		10/04/2008

   540 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   541 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   542 //!					port		= com<port>

   543 //!					baud rate	= 9600

   544 //!					data bits	= 8

   545 //!					stop bits	= 1

   546 //!					parity		= none

   547 //!					flow control	= none

   548 //!				2. Change configuration

   549 //!					baud rate	= <baud>

   550 //!					data bits	= 8

   551 //!					stop bits	= 2

   552 //!					parity		= even

   553 //!					flow control	= rtscts

   554 //!				3. Send data to com port specifying the length of the data

   555 //!				4. Read data from com port specifying the length of the data

   556 //!				5. Restore configuration

   557 //!				6. Destroy the object

   558 //! @SYMTestStatus		Implemented

   559 //! @SYMTestPriority		High

   560 //! @SYMTestExpectedResults	Data read should be as expected

   561 //! @SYMTestType		CIT

   562 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   563 		CREATE_OBJECT	RBusDevComm	busDevComm

   564 		CREATE_OBJECT	TCommConfigV01	configSave

   565 		CREATE_OBJECT	TCommConfigV01	config

   566 		COMMAND		busDevComm	new

   567 		COMMAND		configSave	new

   568 		COMMAND		config		new

   569 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   570 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   571 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   572 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   573 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   574 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   575 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   576 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   577 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   579 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-even-rtscts-Write_config

   580 		OUTSTANDING

   581 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   582 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   583 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   584 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

   585 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   586 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   587 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   588 		OUTSTANDING

   590 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   591 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   592 		OUTSTANDING

   594 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   595 		OUTSTANDING

   596 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   597 		COMMAND		busDevComm	Close

   598 		COMMAND		config		~

   599 		COMMAND		configSave	~

   600 		COMMAND		busDevComm	~

   601 	END_TEST_BLOCK

   602 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_rtscts-2002

   605 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2001

   606 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2001

   607 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   608 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   609 //! @SYMAuthor			Louis Henry Nayegon

   610 //! @SYMCreationDate		10/04/2008

   611 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   612 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   613 //!					port		= com<port>

   614 //!					baud rate	= 9600

   615 //!					data bits	= 8

   616 //!					stop bits	= 1

   617 //!					parity		= none

   618 //!					flow control	= none

   619 //!				2. Change configuration

   620 //!					baud rate	= <baud>

   621 //!					data bits	= 8

   622 //!					stop bits	= 1

   623 //!					parity		= odd

   624 //!					flow control	= rtscts

   625 //!				3. Send data to com port without specifying the length of the data

   626 //!				4. Read data from com port without specifying the length of the data

   627 //!				5. Restore configuration

   628 //!				6. Destroy the object

   629 //! @SYMTestStatus		Implemented

   630 //! @SYMTestPriority		High

   631 //! @SYMTestExpectedResults	Data read should be as expected

   632 //! @SYMTestType		CIT

   633 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   634 		CREATE_OBJECT	RBusDevComm	busDevComm

   635 		CREATE_OBJECT	TCommConfigV01	configSave

   636 		CREATE_OBJECT	TCommConfigV01	config

   637 		COMMAND		busDevComm	new

   638 		COMMAND		configSave	new

   639 		COMMAND		config		new

   640 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   641 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   642 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   643 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   644 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   645 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   646 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   647 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   648 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   650 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-odd-rtscts-Write_config

   651 		OUTSTANDING

   652 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   653 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   654 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   655 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

   656 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   657 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   658 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   659 		OUTSTANDING

   661 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   662 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   663 		OUTSTANDING

   665 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   666 		OUTSTANDING

   667 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   668 		COMMAND		busDevComm	Close

   669 		COMMAND		config		~

   670 		COMMAND		configSave	~

   671 		COMMAND		busDevComm	~

   672 	END_TEST_BLOCK

   673 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2001

   676 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2002

   677 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2002

   678 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   679 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   680 //! @SYMAuthor			Louis Henry Nayegon

   681 //! @SYMCreationDate		10/04/2008

   682 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   683 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   684 //!					port		= com<port>

   685 //!					baud rate	= 9600

   686 //!					data bits	= 8

   687 //!					stop bits	= 1

   688 //!					parity		= none

   689 //!					flow control	= none

   690 //!				2. Change configuration

   691 //!					baud rate	= <baud>

   692 //!					data bits	= 8

   693 //!					stop bits	= 1

   694 //!					parity		= odd

   695 //!					flow control	= rtscts

   696 //!				3. Send data to com port specifying the length of the data

   697 //!				4. Read data from com port specifying the length of the data

   698 //!				5. Restore configuration

   699 //!				6. Destroy the object

   700 //! @SYMTestStatus		Implemented

   701 //! @SYMTestPriority		High

   702 //! @SYMTestExpectedResults	Data read should be as expected

   703 //! @SYMTestType		CIT

   704 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   705 		CREATE_OBJECT	RBusDevComm	busDevComm

   706 		CREATE_OBJECT	TCommConfigV01	configSave

   707 		CREATE_OBJECT	TCommConfigV01	config

   708 		COMMAND		busDevComm	new

   709 		COMMAND		configSave	new

   710 		COMMAND		config		new

   711 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   712 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   713 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   714 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   715 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   716 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   717 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   718 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   719 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   721 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-odd-rtscts-Write_config

   722 		OUTSTANDING

   723 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   724 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   725 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   726 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

   727 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   728 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   729 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   730 		OUTSTANDING

   732 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   733 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   734 		OUTSTANDING

   736 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   737 		OUTSTANDING

   738 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   739 		COMMAND		busDevComm	Close

   740 		COMMAND		config		~

   741 		COMMAND		configSave	~

   742 		COMMAND		busDevComm	~

   743 	END_TEST_BLOCK

   744 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_rtscts-2002

   747 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2001

   748 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2001

   749 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   750 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   751 //! @SYMAuthor			Louis Henry Nayegon

   752 //! @SYMCreationDate		10/04/2008

   753 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   754 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   755 //!					port		= com<port>

   756 //!					baud rate	= 9600

   757 //!					data bits	= 8

   758 //!					stop bits	= 1

   759 //!					parity		= none

   760 //!					flow control	= none

   761 //!				2. Change configuration

   762 //!					baud rate	= <baud>

   763 //!					data bits	= 8

   764 //!					stop bits	= 2

   765 //!					parity		= odd

   766 //!					flow control	= rtscts

   767 //!				3. Send data to com port without specifying the length of the data

   768 //!				4. Read data from com port without specifying the length of the data

   769 //!				5. Restore configuration

   770 //!				6. Destroy the object

   771 //! @SYMTestStatus		Implemented

   772 //! @SYMTestPriority		High

   773 //! @SYMTestExpectedResults	Data read should be as expected

   774 //! @SYMTestType		CIT

   775 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   776 		CREATE_OBJECT	RBusDevComm	busDevComm

   777 		CREATE_OBJECT	TCommConfigV01	configSave

   778 		CREATE_OBJECT	TCommConfigV01	config

   779 		COMMAND		busDevComm	new

   780 		COMMAND		configSave	new

   781 		COMMAND		config		new

   782 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   783 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   784 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   785 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   786 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   787 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   788 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   789 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   790 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   792 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-odd-rtscts-Write_config

   793 		OUTSTANDING

   794 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   795 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   796 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   797 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

   798 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   799 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   800 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   801 		OUTSTANDING

   803 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   804 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   805 		OUTSTANDING

   807 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   808 		OUTSTANDING

   809 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   810 		COMMAND		busDevComm	Close

   811 		COMMAND		config		~

   812 		COMMAND		configSave	~

   813 		COMMAND		busDevComm	~

   814 	END_TEST_BLOCK

   815 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2001

   818 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2002

   819 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2002

   820 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   821 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   822 //! @SYMAuthor			Louis Henry Nayegon

   823 //! @SYMCreationDate		10/04/2008

   824 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   825 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   826 //!					port		= com<port>

   827 //!					baud rate	= 9600

   828 //!					data bits	= 8

   829 //!					stop bits	= 1

   830 //!					parity		= none

   831 //!					flow control	= none

   832 //!				2. Change configuration

   833 //!					baud rate	= <baud>

   834 //!					data bits	= 8

   835 //!					stop bits	= 2

   836 //!					parity		= odd

   837 //!					flow control	= rtscts

   838 //!				3. Send data to com port specifying the length of the data

   839 //!				4. Read data from com port specifying the length of the data

   840 //!				5. Restore configuration

   841 //!				6. Destroy the object

   842 //! @SYMTestStatus		Implemented

   843 //! @SYMTestPriority		High

   844 //! @SYMTestExpectedResults	Data read should be as expected

   845 //! @SYMTestType		CIT

   846 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   847 		CREATE_OBJECT	RBusDevComm	busDevComm

   848 		CREATE_OBJECT	TCommConfigV01	configSave

   849 		CREATE_OBJECT	TCommConfigV01	config

   850 		COMMAND		busDevComm	new

   851 		COMMAND		configSave	new

   852 		COMMAND		config		new

   853 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   854 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   855 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   856 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   857 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   858 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   859 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   860 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   861 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   863 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-odd-rtscts-Write_config

   864 		OUTSTANDING

   865 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   866 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   867 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

   868 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

   869 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeRtsCts

   870 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   871 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   872 		OUTSTANDING

   874 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

   875 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

   876 		OUTSTANDING

   878 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   879 		OUTSTANDING

   880 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   881 		COMMAND		busDevComm	Close

   882 		COMMAND		config		~

   883 		COMMAND		configSave	~

   884 		COMMAND		busDevComm	~

   885 	END_TEST_BLOCK

   886 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_rtscts-2002

   889 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2001

   890 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2001

   891 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

   892 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

   893 //! @SYMAuthor			Louis Henry Nayegon

   894 //! @SYMCreationDate		10/04/2008

   895 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   896 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   897 //!					port		= com<port>

   898 //!					baud rate	= 9600

   899 //!					data bits	= 8

   900 //!					stop bits	= 1

   901 //!					parity		= none

   902 //!					flow control	= none

   903 //!				2. Change configuration

   904 //!					baud rate	= <baud>

   905 //!					data bits	= 8

   906 //!					stop bits	= 1

   907 //!					parity		= none

   908 //!					flow control	= xonxoff

   909 //!				3. Send data to com port without specifying the length of the data

   910 //!				4. Read data from com port without specifying the length of the data

   911 //!				5. Restore configuration

   912 //!				6. Destroy the object

   913 //! @SYMTestStatus		Implemented

   914 //! @SYMTestPriority		High

   915 //! @SYMTestExpectedResults	Data read should be as expected

   916 //! @SYMTestType		CIT

   917 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   918 		CREATE_OBJECT	RBusDevComm	busDevComm

   919 		CREATE_OBJECT	TCommConfigV01	configSave

   920 		CREATE_OBJECT	TCommConfigV01	config

   921 		COMMAND		busDevComm	new

   922 		COMMAND		configSave	new

   923 		COMMAND		config		new

   924 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   925 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   926 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   927 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   928 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

   929 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

   930 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

   931 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

   932 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   934 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-none-xonxoff-Write_config

   935 		OUTSTANDING

   936 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

   937 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

   938 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

   939 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

   940 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

   941 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

   942 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

   943 		OUTSTANDING

   945 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

   946 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

   947 		OUTSTANDING

   949 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

   950 		OUTSTANDING

   951 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   952 		COMMAND		busDevComm	Close

   953 		COMMAND		config		~

   954 		COMMAND		configSave	~

   955 		COMMAND		busDevComm	~

   956 	END_TEST_BLOCK

   957 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2001

   960 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2002

   961 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2002

   962 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

   963 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

   964 //! @SYMAuthor			Louis Henry Nayegon

   965 //! @SYMCreationDate		10/04/2008

   966 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

   967 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

   968 //!					port		= com<port>

   969 //!					baud rate	= 9600

   970 //!					data bits	= 8

   971 //!					stop bits	= 1

   972 //!					parity		= none

   973 //!					flow control	= none

   974 //!				2. Change configuration

   975 //!					baud rate	= <baud>

   976 //!					data bits	= 8

   977 //!					stop bits	= 1

   978 //!					parity		= none

   979 //!					flow control	= xonxoff

   980 //!				3. Send data to com port specifying the length of the data

   981 //!				4. Read data from com port specifying the length of the data

   982 //!				5. Restore configuration

   983 //!				6. Destroy the object

   984 //! @SYMTestStatus		Implemented

   985 //! @SYMTestPriority		High

   986 //! @SYMTestExpectedResults	Data read should be as expected

   987 //! @SYMTestType		CIT

   988 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

   989 		CREATE_OBJECT	RBusDevComm	busDevComm

   990 		CREATE_OBJECT	TCommConfigV01	configSave

   991 		CREATE_OBJECT	TCommConfigV01	config

   992 		COMMAND		busDevComm	new

   993 		COMMAND		configSave	new

   994 		COMMAND		config		new

   995 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

   996 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

   997 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

   998 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

   999 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1000 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1001 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1002 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1003 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1005 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-none-xonxoff-Write_config

  1006 		OUTSTANDING

  1007 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1008 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1009 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

  1010 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

  1011 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1012 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1013 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1014 		OUTSTANDING

  1016 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1017 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1018 		OUTSTANDING

  1020 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1021 		OUTSTANDING

  1022 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1023 		COMMAND		busDevComm	Close

  1024 		COMMAND		config		~

  1025 		COMMAND		configSave	~

  1026 		COMMAND		busDevComm	~

  1027 	END_TEST_BLOCK

  1028 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_none_xonxoff-2002

  1031 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2001

  1032 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2001

  1033 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

  1034 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

  1035 //! @SYMAuthor			Louis Henry Nayegon

  1036 //! @SYMCreationDate		10/04/2008

  1037 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1038 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1039 //!					port		= com<port>

  1040 //!					baud rate	= 9600

  1041 //!					data bits	= 8

  1042 //!					stop bits	= 1

  1043 //!					parity		= none

  1044 //!					flow control	= none

  1045 //!				2. Change configuration

  1046 //!					baud rate	= <baud>

  1047 //!					data bits	= 8

  1048 //!					stop bits	= 2

  1049 //!					parity		= none

  1050 //!					flow control	= xonxoff

  1051 //!				3. Send data to com port without specifying the length of the data

  1052 //!				4. Read data from com port without specifying the length of the data

  1053 //!				5. Restore configuration

  1054 //!				6. Destroy the object

  1055 //! @SYMTestStatus		Implemented

  1056 //! @SYMTestPriority		High

  1057 //! @SYMTestExpectedResults	Data read should be as expected

  1058 //! @SYMTestType		CIT

  1059 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1060 		CREATE_OBJECT	RBusDevComm	busDevComm

  1061 		CREATE_OBJECT	TCommConfigV01	configSave

  1062 		CREATE_OBJECT	TCommConfigV01	config

  1063 		COMMAND		busDevComm	new

  1064 		COMMAND		configSave	new

  1065 		COMMAND		config		new

  1066 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1067 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1068 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1069 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1070 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1071 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1072 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1073 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1074 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1076 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-none-xonxoff-Write_config

  1077 		OUTSTANDING

  1078 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1079 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1080 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1081 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

  1082 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1083 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1084 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1085 		OUTSTANDING

  1087 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

  1088 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

  1089 		OUTSTANDING

  1091 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1092 		OUTSTANDING

  1093 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1094 		COMMAND		busDevComm	Close

  1095 		COMMAND		config		~

  1096 		COMMAND		configSave	~

  1097 		COMMAND		busDevComm	~

  1098 	END_TEST_BLOCK

  1099 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2001

  1102 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2002

  1103 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2002

  1104 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

  1105 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

  1106 //! @SYMAuthor			Louis Henry Nayegon

  1107 //! @SYMCreationDate		10/04/2008

  1108 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1109 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1110 //!					port		= com<port>

  1111 //!					baud rate	= 9600

  1112 //!					data bits	= 8

  1113 //!					stop bits	= 1

  1114 //!					parity		= none

  1115 //!					flow control	= none

  1116 //!				2. Change configuration

  1117 //!					baud rate	= <baud>

  1118 //!					data bits	= 8

  1119 //!					stop bits	= 2

  1120 //!					parity		= none

  1121 //!					flow control	= xonxoff

  1122 //!				3. Send data to com port specifying the length of the data

  1123 //!				4. Read data from com port specifying the length of the data

  1124 //!				5. Restore configuration

  1125 //!				6. Destroy the object

  1126 //! @SYMTestStatus		Implemented

  1127 //! @SYMTestPriority		High

  1128 //! @SYMTestExpectedResults	Data read should be as expected

  1129 //! @SYMTestType		CIT

  1130 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1131 		CREATE_OBJECT	RBusDevComm	busDevComm

  1132 		CREATE_OBJECT	TCommConfigV01	configSave

  1133 		CREATE_OBJECT	TCommConfigV01	config

  1134 		COMMAND		busDevComm	new

  1135 		COMMAND		configSave	new

  1136 		COMMAND		config		new

  1137 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1138 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1139 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1140 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1141 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1142 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1143 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1144 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1145 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1147 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-none-xonxoff-Write_config

  1148 		OUTSTANDING

  1149 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1150 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1151 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1152 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityNone

  1153 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1154 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1155 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1156 		OUTSTANDING

  1158 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1159 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1160 		OUTSTANDING

  1162 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1163 		OUTSTANDING

  1164 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1165 		COMMAND		busDevComm	Close

  1166 		COMMAND		config		~

  1167 		COMMAND		configSave	~

  1168 		COMMAND		busDevComm	~

  1169 	END_TEST_BLOCK

  1170 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_none_xonxoff-2002

  1173 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2001

  1174 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2001

  1175 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

  1176 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

  1177 //! @SYMAuthor			Louis Henry Nayegon

  1178 //! @SYMCreationDate		10/04/2008

  1179 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1180 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1181 //!					port		= com<port>

  1182 //!					baud rate	= 9600

  1183 //!					data bits	= 8

  1184 //!					stop bits	= 1

  1185 //!					parity		= none

  1186 //!					flow control	= none

  1187 //!				2. Change configuration

  1188 //!					baud rate	= <baud>

  1189 //!					data bits	= 8

  1190 //!					stop bits	= 1

  1191 //!					parity		= even

  1192 //!					flow control	= xonxoff

  1193 //!				3. Send data to com port without specifying the length of the data

  1194 //!				4. Read data from com port without specifying the length of the data

  1195 //!				5. Restore configuration

  1196 //!				6. Destroy the object

  1197 //! @SYMTestStatus		Implemented

  1198 //! @SYMTestPriority		High

  1199 //! @SYMTestExpectedResults	Data read should be as expected

  1200 //! @SYMTestType		CIT

  1201 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1202 		CREATE_OBJECT	RBusDevComm	busDevComm

  1203 		CREATE_OBJECT	TCommConfigV01	configSave

  1204 		CREATE_OBJECT	TCommConfigV01	config

  1205 		COMMAND		busDevComm	new

  1206 		COMMAND		configSave	new

  1207 		COMMAND		config		new

  1208 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1209 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1210 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1211 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1212 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1213 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1214 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1215 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1216 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1218 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-even-xonxoff-Write_config

  1219 		OUTSTANDING

  1220 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1221 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1222 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

  1223 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

  1224 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1225 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1226 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1227 		OUTSTANDING

  1229 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

  1230 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

  1231 		OUTSTANDING

  1233 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1234 		OUTSTANDING

  1235 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1236 		COMMAND		busDevComm	Close

  1237 		COMMAND		config		~

  1238 		COMMAND		configSave	~

  1239 		COMMAND		busDevComm	~

  1240 	END_TEST_BLOCK

  1241 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2001

  1244 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2002

  1245 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2002

  1246 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

  1247 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

  1248 //! @SYMAuthor			Louis Henry Nayegon

  1249 //! @SYMCreationDate		10/04/2008

  1250 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1251 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1252 //!					port		= com<port>

  1253 //!					baud rate	= 9600

  1254 //!					data bits	= 8

  1255 //!					stop bits	= 1

  1256 //!					parity		= none

  1257 //!					flow control	= none

  1258 //!				2. Change configuration

  1259 //!					baud rate	= <baud>

  1260 //!					data bits	= 8

  1261 //!					stop bits	= 1

  1262 //!					parity		= even

  1263 //!					flow control	= xonxoff

  1264 //!				3. Send data to com port specifying the length of the data

  1265 //!				4. Read data from com port specifying the length of the data

  1266 //!				5. Restore configuration

  1267 //!				6. Destroy the object

  1268 //! @SYMTestStatus		Implemented

  1269 //! @SYMTestPriority		High

  1270 //! @SYMTestExpectedResults	Data read should be as expected

  1271 //! @SYMTestType		CIT

  1272 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1273 		CREATE_OBJECT	RBusDevComm	busDevComm

  1274 		CREATE_OBJECT	TCommConfigV01	configSave

  1275 		CREATE_OBJECT	TCommConfigV01	config

  1276 		COMMAND		busDevComm	new

  1277 		COMMAND		configSave	new

  1278 		COMMAND		config		new

  1279 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1280 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1281 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1282 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1283 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1284 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1285 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1286 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1287 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1289 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-even-xonxoff-Write_config

  1290 		OUTSTANDING

  1291 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1292 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1293 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

  1294 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

  1295 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1296 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1297 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1298 		OUTSTANDING

  1300 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1301 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1302 		OUTSTANDING

  1304 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1305 		OUTSTANDING

  1306 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1307 		COMMAND		busDevComm	Close

  1308 		COMMAND		config		~

  1309 		COMMAND		configSave	~

  1310 		COMMAND		busDevComm	~

  1311 	END_TEST_BLOCK

  1312 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_even_xonxoff-2002

  1315 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2001

  1316 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2001

  1317 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

  1318 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

  1319 //! @SYMAuthor			Louis Henry Nayegon

  1320 //! @SYMCreationDate		10/04/2008

  1321 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1322 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1323 //!					port		= com<port>

  1324 //!					baud rate	= 9600

  1325 //!					data bits	= 8

  1326 //!					stop bits	= 1

  1327 //!					parity		= none

  1328 //!					flow control	= none

  1329 //!				2. Change configuration

  1330 //!					baud rate	= <baud>

  1331 //!					data bits	= 8

  1332 //!					stop bits	= 2

  1333 //!					parity		= even

  1334 //!					flow control	= xonxoff

  1335 //!				3. Send data to com port without specifying the length of the data

  1336 //!				4. Read data from com port without specifying the length of the data

  1337 //!				5. Restore configuration

  1338 //!				6. Destroy the object

  1339 //! @SYMTestStatus		Implemented

  1340 //! @SYMTestPriority		High

  1341 //! @SYMTestExpectedResults	Data read should be as expected

  1342 //! @SYMTestType		CIT

  1343 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1344 		CREATE_OBJECT	RBusDevComm	busDevComm

  1345 		CREATE_OBJECT	TCommConfigV01	configSave

  1346 		CREATE_OBJECT	TCommConfigV01	config

  1347 		COMMAND		busDevComm	new

  1348 		COMMAND		configSave	new

  1349 		COMMAND		config		new

  1350 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1351 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1352 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1353 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1354 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1355 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1356 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1357 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1358 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1360 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-even-xonxoff-Write_config

  1361 		OUTSTANDING

  1362 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1363 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1364 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1365 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

  1366 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1367 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1368 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1369 		OUTSTANDING

  1371 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

  1372 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

  1373 		OUTSTANDING

  1375 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1376 		OUTSTANDING

  1377 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1378 		COMMAND		busDevComm	Close

  1379 		COMMAND		config		~

  1380 		COMMAND		configSave	~

  1381 		COMMAND		busDevComm	~

  1382 	END_TEST_BLOCK

  1383 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2001

  1386 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2002

  1387 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2002

  1388 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

  1389 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

  1390 //! @SYMAuthor			Louis Henry Nayegon

  1391 //! @SYMCreationDate		10/04/2008

  1392 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1393 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1394 //!					port		= com<port>

  1395 //!					baud rate	= 9600

  1396 //!					data bits	= 8

  1397 //!					stop bits	= 1

  1398 //!					parity		= none

  1399 //!					flow control	= none

  1400 //!				2. Change configuration

  1401 //!					baud rate	= <baud>

  1402 //!					data bits	= 8

  1403 //!					stop bits	= 2

  1404 //!					parity		= even

  1405 //!					flow control	= xonxoff

  1406 //!				3. Send data to com port specifying the length of the data

  1407 //!				4. Read data from com port specifying the length of the data

  1408 //!				5. Restore configuration

  1409 //!				6. Destroy the object

  1410 //! @SYMTestStatus		Implemented

  1411 //! @SYMTestPriority		High

  1412 //! @SYMTestExpectedResults	Data read should be as expected

  1413 //! @SYMTestType		CIT

  1414 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1415 		CREATE_OBJECT	RBusDevComm	busDevComm

  1416 		CREATE_OBJECT	TCommConfigV01	configSave

  1417 		CREATE_OBJECT	TCommConfigV01	config

  1418 		COMMAND		busDevComm	new

  1419 		COMMAND		configSave	new

  1420 		COMMAND		config		new

  1421 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1422 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1423 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1424 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1425 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1426 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1427 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1428 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1429 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1431 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-even-xonxoff-Write_config

  1432 		OUTSTANDING

  1433 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1434 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1435 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1436 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityEven

  1437 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1438 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1439 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1440 		OUTSTANDING

  1442 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1443 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1444 		OUTSTANDING

  1446 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1447 		OUTSTANDING

  1448 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1449 		COMMAND		busDevComm	Close

  1450 		COMMAND		config		~

  1451 		COMMAND		configSave	~

  1452 		COMMAND		busDevComm	~

  1453 	END_TEST_BLOCK

  1454 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_even_xonxoff-2002

  1457 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2001

  1458 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2001

  1459 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

  1460 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

  1461 //! @SYMAuthor			Louis Henry Nayegon

  1462 //! @SYMCreationDate		10/04/2008

  1463 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1464 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1465 //!					port		= com<port>

  1466 //!					baud rate	= 9600

  1467 //!					data bits	= 8

  1468 //!					stop bits	= 1

  1469 //!					parity		= none

  1470 //!					flow control	= none

  1471 //!				2. Change configuration

  1472 //!					baud rate	= <baud>

  1473 //!					data bits	= 8

  1474 //!					stop bits	= 1

  1475 //!					parity		= odd

  1476 //!					flow control	= xonxoff

  1477 //!				3. Send data to com port without specifying the length of the data

  1478 //!				4. Read data from com port without specifying the length of the data

  1479 //!				5. Restore configuration

  1480 //!				6. Destroy the object

  1481 //! @SYMTestStatus		Implemented

  1482 //! @SYMTestPriority		High

  1483 //! @SYMTestExpectedResults	Data read should be as expected

  1484 //! @SYMTestType		CIT

  1485 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1486 		CREATE_OBJECT	RBusDevComm	busDevComm

  1487 		CREATE_OBJECT	TCommConfigV01	configSave

  1488 		CREATE_OBJECT	TCommConfigV01	config

  1489 		COMMAND		busDevComm	new

  1490 		COMMAND		configSave	new

  1491 		COMMAND		config		new

  1492 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1493 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1494 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1495 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1496 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1497 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1498 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1499 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1500 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1502 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-odd-xonxoff-Write_config

  1503 		OUTSTANDING

  1504 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1505 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1506 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

  1507 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

  1508 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1509 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1510 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1511 		OUTSTANDING

  1513 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

  1514 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

  1515 		OUTSTANDING

  1517 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1518 		OUTSTANDING

  1519 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1520 		COMMAND		busDevComm	Close

  1521 		COMMAND		config		~

  1522 		COMMAND		configSave	~

  1523 		COMMAND		busDevComm	~

  1524 	END_TEST_BLOCK

  1525 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2001

  1528 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2002

  1529 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2002

  1530 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

  1531 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

  1532 //! @SYMAuthor			Louis Henry Nayegon

  1533 //! @SYMCreationDate		10/04/2008

  1534 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1535 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1536 //!					port		= com<port>

  1537 //!					baud rate	= 9600

  1538 //!					data bits	= 8

  1539 //!					stop bits	= 1

  1540 //!					parity		= none

  1541 //!					flow control	= none

  1542 //!				2. Change configuration

  1543 //!					baud rate	= <baud>

  1544 //!					data bits	= 8

  1545 //!					stop bits	= 1

  1546 //!					parity		= odd

  1547 //!					flow control	= xonxoff

  1548 //!				3. Send data to com port specifying the length of the data

  1549 //!				4. Read data from com port specifying the length of the data

  1550 //!				5. Restore configuration

  1551 //!				6. Destroy the object

  1552 //! @SYMTestStatus		Implemented

  1553 //! @SYMTestPriority		High

  1554 //! @SYMTestExpectedResults	Data read should be as expected

  1555 //! @SYMTestType		CIT

  1556 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1557 		CREATE_OBJECT	RBusDevComm	busDevComm

  1558 		CREATE_OBJECT	TCommConfigV01	configSave

  1559 		CREATE_OBJECT	TCommConfigV01	config

  1560 		COMMAND		busDevComm	new

  1561 		COMMAND		configSave	new

  1562 		COMMAND		config		new

  1563 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1564 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1565 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1566 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1567 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1568 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1569 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1570 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1571 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1573 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-1-odd-xonxoff-Write_config

  1574 		OUTSTANDING

  1575 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1576 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1577 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop1

  1578 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

  1579 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1580 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1581 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1582 		OUTSTANDING

  1584 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1585 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1586 		OUTSTANDING

  1588 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1589 		OUTSTANDING

  1590 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1591 		COMMAND		busDevComm	Close

  1592 		COMMAND		config		~

  1593 		COMMAND		configSave	~

  1594 		COMMAND		busDevComm	~

  1595 	END_TEST_BLOCK

  1596 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_1_odd_xonxoff-2002

  1599 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2001

  1600 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2001

  1601 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref});

  1602 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref})

  1603 //! @SYMAuthor			Louis Henry Nayegon

  1604 //! @SYMCreationDate		10/04/2008

  1605 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1606 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1607 //!					port		= com<port>

  1608 //!					baud rate	= 9600

  1609 //!					data bits	= 8

  1610 //!					stop bits	= 1

  1611 //!					parity		= none

  1612 //!					flow control	= none

  1613 //!				2. Change configuration

  1614 //!					baud rate	= <baud>

  1615 //!					data bits	= 8

  1616 //!					stop bits	= 2

  1617 //!					parity		= odd

  1618 //!					flow control	= xonxoff

  1619 //!				3. Send data to com port without specifying the length of the data

  1620 //!				4. Read data from com port without specifying the length of the data

  1621 //!				5. Restore configuration

  1622 //!				6. Destroy the object

  1623 //! @SYMTestStatus		Implemented

  1624 //! @SYMTestPriority		High

  1625 //! @SYMTestExpectedResults	Data read should be as expected

  1626 //! @SYMTestType		CIT

  1627 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1628 		CREATE_OBJECT	RBusDevComm	busDevComm

  1629 		CREATE_OBJECT	TCommConfigV01	configSave

  1630 		CREATE_OBJECT	TCommConfigV01	config

  1631 		COMMAND		busDevComm	new

  1632 		COMMAND		configSave	new

  1633 		COMMAND		config		new

  1634 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1635 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1636 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1637 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1638 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1639 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1640 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1641 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1642 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1644 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-odd-xonxoff-Write_config

  1645 		OUTSTANDING

  1646 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1647 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1648 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1649 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

  1650 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1651 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1652 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1653 		OUTSTANDING

  1655 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Read

  1656 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2001-Write

  1657 		OUTSTANDING

  1659 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1660 		OUTSTANDING

  1661 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1662 		COMMAND		busDevComm	Close

  1663 		COMMAND		config		~

  1664 		COMMAND		configSave	~

  1665 		COMMAND		busDevComm	~

  1666 	END_TEST_BLOCK

  1667 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2001

  1670 START_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2002

  1671 //! @SYMTestCaseID		BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2002

  1672 //! @SYMAPI			RBusDevComm::Write(TRequestStatus {ref}, const TDesC8 {ref}, TInt);

  1673 //!				RBusDevComm::Read(TRequestStatus {ref}, TDesC8 {ref}, TInt)

  1674 //! @SYMAuthor			Louis Henry Nayegon

  1675 //! @SYMCreationDate		10/04/2008

  1676 //! @SYMTestCaseDesc		Echo large amount of data read from a file to/from the Serial Echo Server

  1677 //! @SYMTestActions		1. Create RBusDevComm object, save original configuration and configure to echo server startup settings

  1678 //!					port		= com<port>

  1679 //!					baud rate	= 9600

  1680 //!					data bits	= 8

  1681 //!					stop bits	= 1

  1682 //!					parity		= none

  1683 //!					flow control	= none

  1684 //!				2. Change configuration

  1685 //!					baud rate	= <baud>

  1686 //!					data bits	= 8

  1687 //!					stop bits	= 2

  1688 //!					parity		= odd

  1689 //!					flow control	= xonxoff

  1690 //!				3. Send data to com port specifying the length of the data

  1691 //!				4. Read data from com port specifying the length of the data

  1692 //!				5. Restore configuration

  1693 //!				6. Destroy the object

  1694 //! @SYMTestStatus		Implemented

  1695 //! @SYMTestPriority		High

  1696 //! @SYMTestExpectedResults	Data read should be as expected

  1697 //! @SYMTestType		CIT

  1698 	START_TEST_BLOCK	60		t_serial			\base\serial\base-bsp-serial-driver-stress-PORT<port>-<baud>.ini

  1699 		CREATE_OBJECT	RBusDevComm	busDevComm

  1700 		CREATE_OBJECT	TCommConfigV01	configSave

  1701 		CREATE_OBJECT	TCommConfigV01	config

  1702 		COMMAND		busDevComm	new

  1703 		COMMAND		configSave	new

  1704 		COMMAND		config		new

  1705 		COMMAND		busDevComm	Open				BASE-BSP-SERIAL-DRIVER-PORT<port>-Open

  1706 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1707 		COMMAND		busDevComm	Config				BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1708 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-ECHO-iRate

  1709 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-ECHO-iDataBits

  1710 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-ECHO-iStopBits

  1711 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-ECHO-iParity

  1712 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-ECHO-iHandshake

  1713 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1715 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-<baud>-8-2-odd-xonxoff-Write_config

  1716 		OUTSTANDING

  1717 		COMMAND		config		iRate				BASE-BSP-SERIAL-DRIVER-iRate

  1718 		COMMAND		config		iDataBits			BASE-BSP-SERIAL-DRIVER-EData8

  1719 		COMMAND		config		iStopBits			BASE-BSP-SERIAL-DRIVER-EStop2

  1720 		COMMAND		config		iParity				BASE-BSP-SERIAL-DRIVER-EParityOdd

  1721 		COMMAND		config		iHandshake			BASE-BSP-SERIAL-DRIVER-HandshakeXonXoff

  1722 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-Config

  1723 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-ECHO-Read_config

  1724 		OUTSTANDING

  1726 		COMMAND		busDevComm	Read				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Read

  1727 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-STRESS-8-2002-Write

  1728 		OUTSTANDING

  1730 		COMMAND		busDevComm	Write				BASE-BSP-SERIAL-DRIVER-ECHO-Write-Reset

  1731 		OUTSTANDING

  1732 		COMMAND		busDevComm	SetConfig			BASE-BSP-SERIAL-DRIVER-ECHO-ConfigSave

  1733 		COMMAND		busDevComm	Close

  1734 		COMMAND		config		~

  1735 		COMMAND		configSave	~

  1736 		COMMAND		busDevComm	~

  1737 	END_TEST_BLOCK

  1738 END_TESTCASE			BASE-BSP-SERIAL-DRIVER-STRESS_PORT<port>_<baud>_8_2_odd_xonxoff-2002

author	sl
	Tue, 10 Jun 2014 14:32:02 +0200
changeset 1	260cb5ec6c19
permissions	-rw-r--r--