os/boardsupport/haitest/bspsvs/suite/bsp/mmc/testdata/h6hrp/sd/t_sd.ini
changeset 0 bde4ae8d615e
     1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/os/boardsupport/haitest/bspsvs/suite/bsp/mmc/testdata/h6hrp/sd/t_sd.ini	Fri Jun 15 03:10:57 2012 +0200
     1.3 @@ -0,0 +1,145 @@
     1.4 +# This is the global environment file to configure the MMC/SD on device specific
     1.5 +# The current default MMC/SD card values are configured for TI OMAP 2420 (H4) hardware.
     1.6 +# Licencees may need to configure below values to specific devices 
     1.7 +
     1.8 +#Logical Device Driver developed to test MMC/SD controller 
     1.9 +[logicaldevice]
    1.10 +lddname			=D_MMCSDIF
    1.11 +
    1.12 +[stack]
    1.13 +# Stack Number- Symbian Stack supports only Single cards at a time
    1.14 +stackno			=0
    1.15 +
    1.16 +[cardinfo]
    1.17 +# Card Number
    1.18 +cardnumber		=0
    1.19 +
    1.20 +[psuinfo]
    1.21 +# Power Supply information supported by the platform
    1.22 +
    1.23 +#OCR from 3.1V to 3.2V (H4 voltage is 3.11V)
    1.24 +#voltage in OCR Register 32 Bit Format (Hexa Decimal)
    1.25 +supported_voltage	=0x00ff8000
    1.26 +
    1.27 +#Current in MicroAmps
    1.28 +current			=0
    1.29 +
    1.30 +#Voltage Interval
    1.31 +voltageinterval		=0
    1.32 +
    1.33 +#Voltage Check
    1.34 +voltagecheck		=EDPsuChkComparator
    1.35 +
    1.36 +#Inactivity count
    1.37 +inactivitycount		=0
    1.38 +
    1.39 +#Notlockedcount
    1.40 +notlockedcount		=0
    1.41 +
    1.42 +#Timeout for PowerDown in seconds
    1.43 +psuinactivitytimeOut	=10
    1.44 +
    1.45 +#Bus not locked timeout period, in seconds
    1.46 +notlockedtimeOut	=10
    1.47 +
    1.48 +#Lock State
    1.49 +lockstate		=EFalse
    1.50 +
    1.51 +#Psu OFF
    1.52 +psuoff			=ETrue
    1.53 +
    1.54 +[busstate]
    1.55 +cardbusstate		=EBusOff			
    1.56 +[powersupply]
    1.57 +#power supply unit number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
    1.58 +unit			=0
    1.59 +
    1.60 +#Psu current Limit IsSafe? ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
    1.61 +curlimit		=0
    1.62 +
    1.63 +
    1.64 +#power supply state
    1.65 +initvccstate		=EDPsuOff
    1.66 +
    1.67 +[mediachange]
    1.68 +#Media Change Number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
    1.69 +mcID			=0
    1.70 +
    1.71 +[mediastate]
    1.72 +#Initial Media State
    1.73 +initialstate		=EClosed
    1.74 +
    1.75 +#Force Media Change support
    1.76 +forcedstate		=EClosed
    1.77 +
    1.78 +#Standbymode ON/OFF
    1.79 +standbymode 		=EFalse
    1.80 +
    1.81 +#Replay Event Counts
    1.82 +eventcount		=0
    1.83 +
    1.84 +#Bus type
    1.85 +bustype			=0
    1.86 +[bufferinfo]
    1.87 +#buflen
    1.88 +buflen			=266240
    1.89 +
    1.90 +[machineinfo]
    1.91 +#machineinfo
    1.92 +expectedtotalsockets			=1
    1.93 +expectedtotalmediachanges		=0
    1.94 +expectedtotalprimarysupplies		=0
    1.95 +expectedbasebusnumber			=0
    1.96 +expectedspimode				=FALSE
    1.97 +hasflagsupportsspimode			=FALSE
    1.98 +hasflagsupportsdoublebuffering		=FALSE
    1.99 +hasflagsupportsr7			=TRUE
   1.100 +hasflagmaxtransferlength256k		=FALSE
   1.101 +hasflagmaxtransferlength512k		=FALSE
   1.102 +hasflagmaxtransferlength1m		=FALSE
   1.103 +hasflagmaxtransferlength2m		=FALSE
   1.104 +hasflagmaxtransferlength4m		=FALSE
   1.105 +hasflagmaxtransferlength8m		=FALSE
   1.106 +hasflagmaxtransferlength16m		=FALSE
   1.107 +hasflagdma8bitaddressing		=FALSE
   1.108 +hasflagdma16bitaddressing		=FALSE
   1.109 +hasflagdma32bitaddressing		=FALSE
   1.110 +hasflagdma64bitaddressing		=FALSE
   1.111 +hasflagsupportsdma			=FALSE
   1.112 +
   1.113 +[partialreadinfo]
   1.114 +#partialreadinfo
   1.115 +prdstart1				=0
   1.116 +prdend1					=512
   1.117 +expectedprdstart1		=0
   1.118 +expectedprdend1			=512
   1.119 +
   1.120 +prdstart2				=0
   1.121 +prdend2					=4096
   1.122 +expectedprdstart2			=0
   1.123 +expectedprdend2				=512
   1.124 +
   1.125 +prdstart3				=0
   1.126 +prdend3					=256
   1.127 +expectedprdstart3		=0
   1.128 +expectedprdend3			=512
   1.129 +
   1.130 +prdstart4				=127
   1.131 +prdend4					=719
   1.132 +expectedprdstart4		=0
   1.133 +expectedprdend4			=512
   1.134 +
   1.135 +
   1.136 +[stacktests]
   1.137 +#stacktests
   1.138 +expectedasyncerror0004			=1
   1.139 +expectedstateoff			=EPBusOff
   1.140 +expectedstateon				=EPBusOn
   1.141 +
   1.142 +[devinfo]
   1.143 +maxcards				=1
   1.144 +programperiodms				=1
   1.145 +
   1.146 +[cardpdata]
   1.147 +transferspeed				=42
   1.148 +readcurrentinmilliamps 			=45