# HG changeset patch
# User moel.mich
# Date 1264545468 0
# Node ID 361e324a0ed4bbc6713cb21ca1a7f9fae588d806
# Parent 77e062628ef5848ff6c5abaa1a052918b1507559
Initial commit.
diff -r 77e062628ef5 -r 361e324a0ed4 External/Aga.Controls.dll
Binary file External/Aga.Controls.dll has changed
diff -r 77e062628ef5 -r 361e324a0ed4 External/WinRing0.dll
Binary file External/WinRing0.dll has changed
diff -r 77e062628ef5 -r 361e324a0ed4 External/WinRing0.sys
Binary file External/WinRing0.sys has changed
diff -r 77e062628ef5 -r 361e324a0ed4 External/WinRing0.vxd
Binary file External/WinRing0.vxd has changed
diff -r 77e062628ef5 -r 361e324a0ed4 External/WinRing0x64.dll
Binary file External/WinRing0x64.dll has changed
diff -r 77e062628ef5 -r 361e324a0ed4 External/WinRing0x64.sys
Binary file External/WinRing0x64.sys has changed
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/AboutBox.Designer.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/AboutBox.Designer.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,214 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+namespace OpenHardwareMonitor.GUI {
+ partial class AboutBox {
+ /// <summary>
+ /// Required designer variable.
+ /// </summary>
+ private System.ComponentModel.IContainer components = null;
+
+ /// <summary>
+ /// Clean up any resources being used.
+ /// </summary>
+ /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+ protected override void Dispose(bool disposing) {
+ if (disposing && (components != null)) {
+ components.Dispose();
+ }
+ base.Dispose(disposing);
+ }
+
+ #region Windows Form Designer generated code
+
+ /// <summary>
+ /// Required method for Designer support - do not modify
+ /// the contents of this method with the code editor.
+ /// </summary>
+ private void InitializeComponent() {
+ System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(AboutBox));
+ this.okButton = new System.Windows.Forms.Button();
+ this.pictureBox1 = new System.Windows.Forms.PictureBox();
+ this.label1 = new System.Windows.Forms.Label();
+ this.label2 = new System.Windows.Forms.Label();
+ this.label3 = new System.Windows.Forms.Label();
+ this.label4 = new System.Windows.Forms.Label();
+ this.linkLabel = new System.Windows.Forms.LinkLabel();
+ this.label5 = new System.Windows.Forms.Label();
+ this.flowLayoutPanel1 = new System.Windows.Forms.FlowLayoutPanel();
+ ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).BeginInit();
+ this.flowLayoutPanel1.SuspendLayout();
+ this.SuspendLayout();
+ //
+ // okButton
+ //
+ this.okButton.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+ this.okButton.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+ this.okButton.Location = new System.Drawing.Point(305, 142);
+ this.okButton.Name = "okButton";
+ this.okButton.Size = new System.Drawing.Size(87, 27);
+ this.okButton.TabIndex = 0;
+ this.okButton.Text = "OK";
+ this.okButton.UseVisualStyleBackColor = true;
+ //
+ // pictureBox1
+ //
+ this.pictureBox1.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox1.Image")));
+ this.pictureBox1.Location = new System.Drawing.Point(12, 13);
+ this.pictureBox1.Name = "pictureBox1";
+ this.pictureBox1.Size = new System.Drawing.Size(56, 56);
+ this.pictureBox1.SizeMode = System.Windows.Forms.PictureBoxSizeMode.Zoom;
+ this.pictureBox1.TabIndex = 1;
+ this.pictureBox1.TabStop = false;
+ //
+ // label1
+ //
+ this.label1.AutoSize = true;
+ this.label1.Font = new System.Drawing.Font("Segoe UI", 11F, System.Drawing.FontStyle.Bold);
+ this.label1.Location = new System.Drawing.Point(85, 13);
+ this.label1.Margin = new System.Windows.Forms.Padding(12, 0, 12, 0);
+ this.label1.Name = "label1";
+ this.label1.Size = new System.Drawing.Size(179, 20);
+ this.label1.TabIndex = 2;
+ this.label1.Text = "Open Hardware Monitor";
+ //
+ // label2
+ //
+ this.label2.AutoSize = true;
+ this.label2.Location = new System.Drawing.Point(86, 54);
+ this.label2.Margin = new System.Windows.Forms.Padding(12, 0, 12, 0);
+ this.label2.Name = "label2";
+ this.label2.Size = new System.Drawing.Size(315, 15);
+ this.label2.TabIndex = 3;
+ this.label2.Text = "Copyright © 2009-2010 Michael Möller. All rights reserved.";
+ //
+ // label3
+ //
+ this.label3.AutoSize = true;
+ this.label3.Location = new System.Drawing.Point(86, 36);
+ this.label3.Margin = new System.Windows.Forms.Padding(12, 0, 12, 0);
+ this.label3.Name = "label3";
+ this.label3.Size = new System.Drawing.Size(90, 15);
+ this.label3.TabIndex = 4;
+ this.label3.Text = "Version 0.1 Beta";
+ //
+ // label4
+ //
+ this.label4.AutoSize = true;
+ this.label4.Location = new System.Drawing.Point(9, 95);
+ this.label4.Margin = new System.Windows.Forms.Padding(12, 0, 12, 0);
+ this.label4.Name = "label4";
+ this.label4.Size = new System.Drawing.Size(412, 15);
+ this.label4.TabIndex = 5;
+ this.label4.Text = "The source code is available under the terms of the Mozilla Public License 1.1";
+ //
+ // linkLabel
+ //
+ this.linkLabel.AutoSize = true;
+ this.linkLabel.Location = new System.Drawing.Point(145, 0);
+ this.linkLabel.Margin = new System.Windows.Forms.Padding(0, 0, 12, 0);
+ this.linkLabel.Name = "linkLabel";
+ this.linkLabel.Size = new System.Drawing.Size(176, 15);
+ this.linkLabel.TabIndex = 6;
+ this.linkLabel.TabStop = true;
+ this.linkLabel.Text = "Open Hardware Monitor Project";
+ this.linkLabel.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked);
+ //
+ // label5
+ //
+ this.label5.AutoSize = true;
+ this.label5.Location = new System.Drawing.Point(0, 0);
+ this.label5.Margin = new System.Windows.Forms.Padding(0, 0, 3, 0);
+ this.label5.Name = "label5";
+ this.label5.Size = new System.Drawing.Size(142, 15);
+ this.label5.TabIndex = 7;
+ this.label5.Text = "from the project website: ";
+ //
+ // flowLayoutPanel1
+ //
+ this.flowLayoutPanel1.AutoSize = true;
+ this.flowLayoutPanel1.AutoSizeMode = System.Windows.Forms.AutoSizeMode.GrowAndShrink;
+ this.flowLayoutPanel1.Controls.Add(this.label5);
+ this.flowLayoutPanel1.Controls.Add(this.linkLabel);
+ this.flowLayoutPanel1.Location = new System.Drawing.Point(12, 115);
+ this.flowLayoutPanel1.Margin = new System.Windows.Forms.Padding(12, 0, 12, 0);
+ this.flowLayoutPanel1.Name = "flowLayoutPanel1";
+ this.flowLayoutPanel1.Size = new System.Drawing.Size(333, 15);
+ this.flowLayoutPanel1.TabIndex = 8;
+ //
+ // AboutBox
+ //
+ this.AcceptButton = this.okButton;
+ this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 15F);
+ this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+ this.AutoSize = true;
+ this.ClientSize = new System.Drawing.Size(404, 182);
+ this.Controls.Add(this.flowLayoutPanel1);
+ this.Controls.Add(this.label4);
+ this.Controls.Add(this.label3);
+ this.Controls.Add(this.label2);
+ this.Controls.Add(this.label1);
+ this.Controls.Add(this.pictureBox1);
+ this.Controls.Add(this.okButton);
+ this.Font = new System.Drawing.Font("Segoe UI", 9F);
+ this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
+ this.MaximizeBox = false;
+ this.MinimizeBox = false;
+ this.Name = "AboutBox";
+ this.StartPosition = System.Windows.Forms.FormStartPosition.CenterParent;
+ this.Text = "About";
+ ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).EndInit();
+ this.flowLayoutPanel1.ResumeLayout(false);
+ this.flowLayoutPanel1.PerformLayout();
+ this.ResumeLayout(false);
+ this.PerformLayout();
+
+ }
+
+ #endregion
+
+ private System.Windows.Forms.Button okButton;
+ private System.Windows.Forms.PictureBox pictureBox1;
+ private System.Windows.Forms.Label label1;
+ private System.Windows.Forms.Label label2;
+ private System.Windows.Forms.Label label3;
+ private System.Windows.Forms.Label label4;
+ private System.Windows.Forms.LinkLabel linkLabel;
+ private System.Windows.Forms.Label label5;
+ private System.Windows.Forms.FlowLayoutPanel flowLayoutPanel1;
+ }
+}
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/AboutBox.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/AboutBox.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,63 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Diagnostics;
+using System.Drawing;
+using System.Windows.Forms;
+
+namespace OpenHardwareMonitor.GUI {
+ public partial class AboutBox : Form {
+ public AboutBox() {
+ InitializeComponent();
+ this.Font = SystemFonts.MessageBoxFont;
+
+ linkLabel.Links.Remove(linkLabel.Links[0]);
+ linkLabel.Links.Add(0, linkLabel.Text.Length,
+ "http://openhardwaremonitor.org");
+
+ }
+
+ private void linkLabel1_LinkClicked(object sender,
+ LinkLabelLinkClickedEventArgs e) {
+ Process.Start(new ProcessStartInfo(e.Link.LinkData.ToString()));
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/AboutBox.resources
Binary file GUI/AboutBox.resources has changed
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/AboutBox.resx
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/AboutBox.resx Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,185 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+ <!--
+ Microsoft ResX Schema
+
+ Version 2.0
+
+ The primary goals of this format is to allow a simple XML format
+ that is mostly human readable. The generation and parsing of the
+ various data types are done through the TypeConverter classes
+ associated with the data types.
+
+ Example:
+
+ ... ado.net/XML headers & schema ...
+ <resheader name="resmimetype">text/microsoft-resx</resheader>
+ <resheader name="version">2.0</resheader>
+ <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+ <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+ <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+ <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+ <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+ <value>[base64 mime encoded serialized .NET Framework object]</value>
+ </data>
+ <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+ <comment>This is a comment</comment>
+ </data>
+
+ There are any number of "resheader" rows that contain simple
+ name/value pairs.
+
+ Each data row contains a name, and value. The row also contains a
+ type or mimetype. Type corresponds to a .NET class that support
+ text/value conversion through the TypeConverter architecture.
+ Classes that don't support this are serialized and stored with the
+ mimetype set.
+
+ The mimetype is used for serialized objects, and tells the
+ ResXResourceReader how to depersist the object. This is currently not
+ extensible. For a given mimetype the value must be set accordingly:
+
+ Note - application/x-microsoft.net.object.binary.base64 is the format
+ that the ResXResourceWriter will generate, however the reader can
+ read any of the formats listed below.
+
+ mimetype: application/x-microsoft.net.object.binary.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.soap.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.bytearray.base64
+ value : The object must be serialized into a byte array
+ : using a System.ComponentModel.TypeConverter
+ : and then encoded with base64 encoding.
+ -->
+ <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+ <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+ <xsd:element name="root" msdata:IsDataSet="true">
+ <xsd:complexType>
+ <xsd:choice maxOccurs="unbounded">
+ <xsd:element name="metadata">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" />
+ </xsd:sequence>
+ <xsd:attribute name="name" use="required" type="xsd:string" />
+ <xsd:attribute name="type" type="xsd:string" />
+ <xsd:attribute name="mimetype" type="xsd:string" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="assembly">
+ <xsd:complexType>
+ <xsd:attribute name="alias" type="xsd:string" />
+ <xsd:attribute name="name" type="xsd:string" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="data">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+ <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+ <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="resheader">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" />
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:choice>
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:schema>
+ <resheader name="resmimetype">
+ <value>text/microsoft-resx</value>
+ </resheader>
+ <resheader name="version">
+ <value>2.0</value>
+ </resheader>
+ <resheader name="reader">
+ <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <resheader name="writer">
+ <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <assembly alias="System.Drawing" name="System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
+ <data name="pictureBox1.Image" type="System.Drawing.Bitmap, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>
+ iVBORw0KGgoAAAANSUhEUgAAADAAAAAwCAYAAABXAvmHAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8
+ YQUAAAAJcEhZcwAADrwAAA68AZW8ckkAAA2KSURBVGhD7VnpU9RXFp2ZL6kkxiSVVBIVWRvoZhUVUUBA
+ FBdQgbCq4BKVycQyxl1UFsV9QRQQxIgR9wX33YiJOlHjxESjpmKSqtF8yX9x55z7fr+mUSfprvliTcWq
+ V02VSt9z77nn3nfeX/7y558/M/BnBv7/MtDYuFW2bKnH2SKb6jbJxo0bZe3atbJq9WpZuXKl1CxfLlXV
+ VbJ0aYWUly+WBQsWyLx582TOnDky65NPZMaMGfLhhx/K9LLpMnXaVJkyZYpMmjhRSkpKpLi4WAryC+T9
+ 9/MkJydHxowZI1lZWTJy5EgZOmyoDBkyRFJTUyV5cLIMGjRIBgwYIH379pW4uDhBpv9qnd9POgMvKMjH
+ KdDPvLw8fOH7kpubK9nZ2TJ27Fj94tGjR+PLM2XUqCycURrEiOHDJSMjQ4YOtYNJk5SUFBmcMliSk5Ml
+ MTFRAxs4cKAG169/P4lDgH369JHY2FiJiYmR6OhoPS5XpISFucQRGq5/h6i743TDeQnnb/8VRX19vRQV
+ FSFb46QIGePPhYWFCsgAyXkGSGamATFixAgZDhDDMoZJenq6pFkZTUFWBw8miCQFoQASEiS+f3/p168f
+ shwnsRaI6OgYiYqKFicAHKp9T0IBgIBeeeWVvq+++mrUyy+/3NMC8XwMBMDgx48fL+PGjdOyFwJEPgCw
+ GqxETrYNwqqEBYBVUADDCMCjCqkpkuIBgFVIGJgg/ePj3QDsKhBAY/W74gyPRgUiJdThlMjISEHwRa+9
+ 9tpogrAqQUo9+4cUYvATJkzQz2KA0CoUFEp+fr7kogoE4EmlzMxMGTkKFLIroABQgbQ05bTSCACSkpI6
+ KYQK9HdXoJNGUVGxEhkRI+HOaK1AWLhTXE6XdOvWbVr37t2LXn/99b4WnZ4PoG5THYIvlZLSUgXhrgJo
+ lJePCgAAe2EMeiFrdJZo8Mr/EZIxDPxH4OmgzvOCT7T4nwD+x7uzb5o0tk+scj06OlYrEO6MQvAuCUUf
+ hIeHE0AZAIwDgH6/C6C2tlZKJpbIRCqHXQX2AgHkMfixkgnlYLYNVexMI8toVGY5Gefpho3vHy/9+xnO
+ M2CbMnbz6mcsmxg9AM47IyJl6zIACXOCSmHeA9iwYYOUlk40AErsKkD+AIC0KSwqlP3798vevXtlz549
+ 0tbWJp999pl8+umn0tzcLOyhTZtqVXpXrlgp1dXVsnTJEpXb2XNmy8yZM6Ws7O/ywQcf4HtKlaYEFRUd
+ JdGeKhRhKuAICxeHw+E9gPXr18vESZNUu/kFpBGbmvwvRi/wz6+//irff/+9fPvtt/L111/LjRv/lKtf
+ filXOq7IhQsX5MyZM3L8+HE50n5EDuzbpyBbd7TKtm3bpKG+Qerq6oTfs2rVKlm2bBlmylJQKE6ikPWo
+ qChVoQiPCgQHB3sPgJmbPHmyTAIIVsEAKNbBc/DgQfntt9/k4cOHAHBPAdy+fVu++uoruXr1qnR0dCiA
+ 06dPK4DDR47IPlSrrW2X7Nixw12hWqtCK1askOqqKlmCCmWhl5xOozgEQQARrgjw3yUBAQHeA1izZs0z
+ AIqKirVpSZ3Hjx/Lox8fyYMHD+S7776Tb775Rm7cvCnXrl2TK1c65OLFi6YCJ45LOyqw/wABoAKtVgUa
+ SLFNsm7dOjfFKioqVX7DwsM06IhIc1wul4Ly9+/tPYDVq1d2BQCOsoE5efeBDo+fPJaffvpJq3D37l0F
+ cAsArl+/DgBX5NKlS3Lm7Bk5ceIEALTLgQMHZPfu3R4AGjoBYDVhj1RUVqgYsFkZMAOPiOgE4Ofn5z0A
+ lrULhQCAk5g7Cxv3yZMn8vPPP8vDHwDg3l25c4cAbimAL74AgIuX5OyZs24A+wGg7SkAdVqB9ditVimA
+ yspKyG4qpm4o5NMAcHkA6NWrly8AatwAqEZUCa4RWZi2BoCpwAOPCtxkBZRCV+TiJUOhrhXwpJBdAQKw
+ K1CpuxLVhprfBQAGWc8ePbwHsBzbJlWIDVwKGR033ihQ5qhMBfBv9sCjH+W+3QP/Qg/cuKE90AEVcvcA
+ mlh7QJu4DU3cKs1QofqG51CookIntCMkxACwq4BKhOO89+573gNgSRm8mQMlOom5A3FZo+7/8ssvoM8P
+ cu/e81Toslw4f96tQkcsFdq1y1OFtgiHJdVOVQirOSnE7dQRYipg94FWAuedd97xHkAVZI36rzOADQwJ
+ 5RZqA3j06JHcv3/frUC3bpkGvnz5MrhvqMPA2bx7VP+NfPI0NTXpPWMjAKxZu0ZqamqE31eBCnAvCrEq
+ 4AmAP7/11luCFcK7VaIC2WDmSyYw+2hgDC9uoNx3SCFbfe7cuYMhZs+Aa3IOmWfg+w+CMlbTkjr8Pzt3
+ 7pTtLdtl69ZGqdu8WTbgkrQack26MvscZFypDYBOJSKVnC6nvPnmm94D4C8b77EDFRYW6BDj7kMKkToM
+ ngOM3L9+/RrU5wsdYCdOnrSk86AGzhVj+/bt0rS1SVo4hcn/p6Yws89Bxt2IACilVCKnzgAzB9544w3v
+ ASxZsljGg/fkPtfoAjRwdk62Dpq2XW1mfbiN9eEmg78uX2KF6LjcIWfPnpVjx47J4cOH3I1rD6/GxkYN
+ nldV8l+HmKVATNji8kUGQLAB4ITyRBCEnnAG7z2A8vJyXR3sm5jZQA0AUoHBc3Vg5k3wl1V5Tp061cn9
+ vXs6sw/ec8Ej9+s21+kdm9Pe8L9SlixeLIsWLdIbGXeeUFbAamR+hgMM1mjvASxauEgHF49eYMB/bqHD
+ sOtz42Tw17D3kDaXOxA8dP/cuXO6+3BX4rRmpbj7cHmzs2+21E1dljjSh8EvWLhA7wIhwUE6zMIIAIEz
+ eILwCQB/mbnQd3UPuPu3tLTo0sad5/PPP5eL4P05UIfZ59rA4HfvbpOd2HtayP0mOBwInLTZWLvRZB/y
+ WVOzQtWH3Of3zZs/XwEEBRGAw/QBAg/DKs39yCcA8/HL8qH75v7Lq2O27kHcVSiD3DhJmXPnz+nEPYnG
+ Zfbb24/KkUOHsX2a9VmVx2pg0ocbKNcHXaGXL4P60JYpV0tm7ty5pgJBITqNFQCDxyePTwD4C0mb3JxO
+ G4WuAwGQDuchl2ew6zDr1Hw2LrN/6JChz24rePuCYysPL0qd3Lezv1D9JJ5Y3MZYAQJgHzBwfoaG+giA
+ 2WDT2mc0PCAOsSFpQ7QRT582w+o4Aj969ChU57Byf+/ezsxr8NuaAbhBNkP3bXOMysMLDLlvZ/8TmGEE
+ QE8o0AbAPkDgDJ494VMFZs+erU2b7WFgcYjxks6b1DGlS7teVhi4Xi8xH3bh0kLa2JlntbYgeFs2SR17
+ cFF57CvmrFmzLADogcAgnQWhrAIC56fDVwC0B+m82e4bXQcOsdSUVA3GzjhvWnv27HXfiVtbdyjnuTI0
+ NDRq5vnv10PzV8OWtNcG6v7ChQuV9wzeBsAeCAwKVAAOR6hSyT4+VWDmxx/LaOz+tEx4ByB9OANSU9Nk
+ w/oNyn1eUOzLPIcVs76tZZtOXHJ+M/Reg8e91w6+ugqXewRP2Zw3b76QOgyen9OnT9dBxjlgAFjBY7kL
+ cYT4RqEZM2aq18Nje54ZGcOVQmzkW7duaRVaQRc7eMorFUqDpykMvWfTrlu3BqbwKs2+uhMWgLkQClKV
+ 3GfwY2HVUDYVAAImAALRA2XyqQIfffQPUIYuG71OZB/0ycAMoHPMS0cqbMKKJRVCuWX26EZPnzYdJsBk
+ vfwUYn5QxSi9pJ75fylqJdI+Yab1gDL8jIMbocGjgbtmPwSAQlSZfAJAazwjY6Q01zgkfSiCzxihbjON
+ Wpq0SYlJurvTnFI3GQ4CzVc6CXQUXBFmhzd7jJmkHEimKQ23mWXuPcx4cIhFG9BFqWNnHp9B+PvAwEDf
+ AJSVlYEqw+VEUw+pXxaKDA7H6XSa6XEmJhmHOX6Abc4ae/Bpt822ywks0rrjcj0gIIcjDMGGIeuhAIOD
+ z+BghzmgTWAQgg8IUkvFpwqQk2kI+vjWntLe0Evqqx3w99O1ialENGo9vf4EmLQD4gd0MWptMKSJp++v
+ fg/ATCoIlNK8ACnNx8kLlBL8XJJrzoRcf5mQw9NbAvwDAMJHANOmTcMLSboca+wph7f4KYgtVQ5JSuZj
+ BQAMJgDjNHv6nwkJxrD1dJyNadv5eEHPMwKWodNF6zwCtHKBTmxeJ+gSBrqEin+AQ/z8Q8Svd7D07h2g
+ IHyqwNSpU5HxIXKquSeq0EsrcbKpp2xdHgyL3NjkrMCzAFAJ9EYnAJq4sM3jDAB1ntEzUwqDZVJ+kB6t
+ gkcFNPOowHhkf1y2H6rgB1PLRwBTYLpSNZKSU8H1ND2DEvFzIriPo4GjB9jMXSuAFxcCeMo2j8NV0Vae
+ mBja5zHoB1TBaWzDULjP7Af2QBD4T+77+wdKb57egb4DoGvMOzElsYgrtfUqw/WC3hCl0f0GBkqxGoMG
+ JSp9+CDHYGOUKhG6kNFpoBT6+/uLHwyqHvB43n77bfueq/T4o+PTjcx6CexuvUkV4XMaTpnn4WPD/3ro
+ MvhyvH6hsQB041sU36T4rMOXkRfgePdGZr2avYSM9yAIvknxWecFON69UloA+A7L91i+y/J99kU5f/xO
+ /NS7pf06/iJ9ukP8D3GWhQo97UjxAAAAAElFTkSuQmCC
+</value>
+ </data>
+</root>
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/HardwareNode.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/HardwareNode.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,119 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using Aga.Controls.Tree;
+using OpenHardwareMonitor.Hardware;
+
+namespace OpenHardwareMonitor.GUI {
+ public class HardwareNode : Node {
+
+ private IHardware hardware;
+
+ private List<TypeNode> typeNodes = new List<TypeNode>();
+
+ public HardwareNode(IHardware hardware) : base(hardware.Name) {
+
+ this.hardware = hardware;
+ this.Image = hardware.Icon;
+
+ typeNodes.Add(new TypeNode(SensorType.Voltage));
+ typeNodes.Add(new TypeNode(SensorType.Clock));
+ typeNodes.Add(new TypeNode(SensorType.Temperature));
+ typeNodes.Add(new TypeNode(SensorType.Fan));
+
+ foreach (ISensor sensor in hardware.Sensors)
+ SensorAdded(sensor);
+
+ hardware.SensorAdded +=new SensorEventHandler(SensorAdded);
+ hardware.SensorRemoved += new SensorEventHandler(SensorRemoved);
+ }
+
+ public IHardware Hardware {
+ get { return hardware; }
+ }
+
+ public void SetVisible(SensorType sensorType, bool visible) {
+ foreach (TypeNode node in typeNodes)
+ if (node.SensorType == sensorType) {
+ node.IsVisible = visible;
+ UpdateNode(node);
+ }
+ }
+
+ private void UpdateNode(TypeNode node) {
+ if (node.IsVisible && node.Nodes.Count > 0) {
+ if (!Nodes.Contains(node)) {
+ int i = 0;
+ while (i < Nodes.Count &&
+ ((TypeNode)Nodes[i]).SensorType < node.SensorType)
+ i++;
+ Nodes.Insert(i, node);
+ }
+ } else {
+ if (Nodes.Contains(node))
+ Nodes.Remove(node);
+ }
+ }
+
+ private void SensorRemoved(ISensor sensor) {
+ foreach (TypeNode node in typeNodes)
+ if (node.SensorType == sensor.SensorType) {
+ node.Nodes.Remove(new SensorNode(sensor));
+ UpdateNode(node);
+ }
+ }
+
+ private void InsertSorted(Node node, ISensor sensor) {
+ int i = 0;
+ while (i < node.Nodes.Count &&
+ ((SensorNode)node.Nodes[i]).Sensor.Index < sensor.Index)
+ i++;
+ node.Nodes.Insert(i, new SensorNode(sensor));
+ }
+
+ private void SensorAdded(ISensor sensor) {
+ foreach (TypeNode node in typeNodes)
+ if (node.SensorType == sensor.SensorType) {
+ InsertSorted(node, sensor);
+ UpdateNode(node);
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/LicenseBox.resources
Binary file GUI/LicenseBox.resources has changed
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/MainForm.Designer.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/MainForm.Designer.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,523 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+namespace OpenHardwareMonitor.GUI {
+ partial class MainForm {
+ /// <summary>
+ /// Required designer variable.
+ /// </summary>
+ private System.ComponentModel.IContainer components = null;
+
+ /// <summary>
+ /// Clean up any resources being used.
+ /// </summary>
+ /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+ protected override void Dispose(bool disposing) {
+ if (disposing && (components != null)) {
+ components.Dispose();
+ }
+ base.Dispose(disposing);
+ }
+
+ #region Windows Form Designer generated code
+
+ /// <summary>
+ /// Required method for Designer support - do not modify
+ /// the contents of this method with the code editor.
+ /// </summary>
+ private void InitializeComponent() {
+ this.components = new System.ComponentModel.Container();
+ System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(MainForm));
+ this.treeView = new Aga.Controls.Tree.TreeViewAdv();
+ this.sensor = new Aga.Controls.Tree.TreeColumn();
+ this.value = new Aga.Controls.Tree.TreeColumn();
+ this.min = new Aga.Controls.Tree.TreeColumn();
+ this.max = new Aga.Controls.Tree.TreeColumn();
+ this.limit = new Aga.Controls.Tree.TreeColumn();
+ this.nodeImage = new Aga.Controls.Tree.NodeControls.NodeIcon();
+ this.nodeCheckBox = new Aga.Controls.Tree.NodeControls.NodeCheckBox();
+ this.nodeTextBoxText = new Aga.Controls.Tree.NodeControls.NodeTextBox();
+ this.nodeTextBoxValue = new Aga.Controls.Tree.NodeControls.NodeTextBox();
+ this.nodeTextBoxMin = new Aga.Controls.Tree.NodeControls.NodeTextBox();
+ this.nodeTextBoxMax = new Aga.Controls.Tree.NodeControls.NodeTextBox();
+ this.nodeTextBoxLimit = new Aga.Controls.Tree.NodeControls.NodeTextBox();
+ this.columnsContextMenuStrip = new System.Windows.Forms.ContextMenuStrip(this.components);
+ this.valueToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.minMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.maxMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.limitMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.menuStrip = new System.Windows.Forms.MenuStrip();
+ this.fileToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.saveReportToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.exitToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.viewToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.sensorsToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.voltMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.clocksMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.tempMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.fansMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.toolStripMenuItem1 = new System.Windows.Forms.ToolStripSeparator();
+ this.plotMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.optionsToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.hddMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.helpToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.aboutToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
+ this.timer = new System.Windows.Forms.Timer(this.components);
+ this.splitContainer = new System.Windows.Forms.SplitContainer();
+ this.plotPanel = new OpenHardwareMonitor.GUI.PlotPanel();
+ this.columnsContextMenuStrip.SuspendLayout();
+ this.menuStrip.SuspendLayout();
+ this.splitContainer.Panel1.SuspendLayout();
+ this.splitContainer.Panel2.SuspendLayout();
+ this.splitContainer.SuspendLayout();
+ this.SuspendLayout();
+ //
+ // treeView
+ //
+ this.treeView.BackColor = System.Drawing.SystemColors.Window;
+ this.treeView.Columns.Add(this.sensor);
+ this.treeView.Columns.Add(this.value);
+ this.treeView.Columns.Add(this.min);
+ this.treeView.Columns.Add(this.max);
+ this.treeView.Columns.Add(this.limit);
+ this.treeView.DefaultToolTipProvider = null;
+ this.treeView.Dock = System.Windows.Forms.DockStyle.Fill;
+ this.treeView.DragDropMarkColor = System.Drawing.Color.Black;
+ this.treeView.Font = new System.Drawing.Font("Segoe UI", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+ this.treeView.FullRowSelect = true;
+ this.treeView.GridLineStyle = Aga.Controls.Tree.GridLineStyle.Horizontal;
+ this.treeView.LineColor = System.Drawing.SystemColors.ControlDark;
+ this.treeView.Location = new System.Drawing.Point(0, 0);
+ this.treeView.Model = null;
+ this.treeView.Name = "treeView";
+ this.treeView.NodeControls.Add(this.nodeImage);
+ this.treeView.NodeControls.Add(this.nodeCheckBox);
+ this.treeView.NodeControls.Add(this.nodeTextBoxText);
+ this.treeView.NodeControls.Add(this.nodeTextBoxValue);
+ this.treeView.NodeControls.Add(this.nodeTextBoxMin);
+ this.treeView.NodeControls.Add(this.nodeTextBoxMax);
+ this.treeView.NodeControls.Add(this.nodeTextBoxLimit);
+ this.treeView.RowHeight = 18;
+ this.treeView.SelectedNode = null;
+ this.treeView.Size = new System.Drawing.Size(478, 567);
+ this.treeView.TabIndex = 0;
+ this.treeView.Text = "treeView";
+ this.treeView.UseColumns = true;
+ this.treeView.Click += new System.EventHandler(this.treeView_Click);
+ //
+ // sensor
+ //
+ this.sensor.Header = "Sensor";
+ this.sensor.SortOrder = System.Windows.Forms.SortOrder.None;
+ this.sensor.TooltipText = null;
+ this.sensor.Width = 250;
+ //
+ // value
+ //
+ this.value.Header = "Value";
+ this.value.SortOrder = System.Windows.Forms.SortOrder.None;
+ this.value.TooltipText = null;
+ this.value.Width = 100;
+ //
+ // min
+ //
+ this.min.Header = "Min";
+ this.min.SortOrder = System.Windows.Forms.SortOrder.None;
+ this.min.TooltipText = null;
+ this.min.Width = 100;
+ //
+ // max
+ //
+ this.max.Header = "Max";
+ this.max.SortOrder = System.Windows.Forms.SortOrder.None;
+ this.max.TooltipText = null;
+ this.max.Width = 100;
+ //
+ // limit
+ //
+ this.limit.Header = "Limit";
+ this.limit.SortOrder = System.Windows.Forms.SortOrder.None;
+ this.limit.TooltipText = null;
+ this.limit.Width = 100;
+ //
+ // nodeImage
+ //
+ this.nodeImage.DataPropertyName = "Image";
+ this.nodeImage.LeftMargin = 1;
+ this.nodeImage.ParentColumn = this.sensor;
+ this.nodeImage.ScaleMode = Aga.Controls.Tree.ImageScaleMode.Fit;
+ //
+ // nodeCheckBox
+ //
+ this.nodeCheckBox.DataPropertyName = "Plot";
+ this.nodeCheckBox.EditEnabled = true;
+ this.nodeCheckBox.LeftMargin = 3;
+ this.nodeCheckBox.ParentColumn = this.sensor;
+ //
+ // nodeTextBoxText
+ //
+ this.nodeTextBoxText.DataPropertyName = "Text";
+ this.nodeTextBoxText.EditEnabled = true;
+ this.nodeTextBoxText.IncrementalSearchEnabled = true;
+ this.nodeTextBoxText.LeftMargin = 3;
+ this.nodeTextBoxText.ParentColumn = this.sensor;
+ //
+ // nodeTextBoxValue
+ //
+ this.nodeTextBoxValue.DataPropertyName = "Value";
+ this.nodeTextBoxValue.IncrementalSearchEnabled = true;
+ this.nodeTextBoxValue.LeftMargin = 3;
+ this.nodeTextBoxValue.ParentColumn = this.value;
+ //
+ // nodeTextBoxMin
+ //
+ this.nodeTextBoxMin.DataPropertyName = "Min";
+ this.nodeTextBoxMin.IncrementalSearchEnabled = true;
+ this.nodeTextBoxMin.LeftMargin = 3;
+ this.nodeTextBoxMin.ParentColumn = this.min;
+ //
+ // nodeTextBoxMax
+ //
+ this.nodeTextBoxMax.DataPropertyName = "Max";
+ this.nodeTextBoxMax.IncrementalSearchEnabled = true;
+ this.nodeTextBoxMax.LeftMargin = 3;
+ this.nodeTextBoxMax.ParentColumn = this.max;
+ //
+ // nodeTextBoxLimit
+ //
+ this.nodeTextBoxLimit.DataPropertyName = "Limit";
+ this.nodeTextBoxLimit.EditEnabled = true;
+ this.nodeTextBoxLimit.IncrementalSearchEnabled = true;
+ this.nodeTextBoxLimit.LeftMargin = 3;
+ this.nodeTextBoxLimit.ParentColumn = this.limit;
+ //
+ // columnsContextMenuStrip
+ //
+ this.columnsContextMenuStrip.Items.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.valueToolStripMenuItem,
+ this.minMenuItem,
+ this.maxMenuItem,
+ this.limitMenuItem});
+ this.columnsContextMenuStrip.Name = "columnsContextMenuStrip";
+ this.columnsContextMenuStrip.Size = new System.Drawing.Size(104, 92);
+ //
+ // valueToolStripMenuItem
+ //
+ this.valueToolStripMenuItem.Checked = true;
+ this.valueToolStripMenuItem.CheckOnClick = true;
+ this.valueToolStripMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.valueToolStripMenuItem.Name = "valueToolStripMenuItem";
+ this.valueToolStripMenuItem.Size = new System.Drawing.Size(103, 22);
+ this.valueToolStripMenuItem.Text = "Value";
+ this.valueToolStripMenuItem.CheckedChanged += new System.EventHandler(this.valueToolStripMenuItem_CheckedChanged);
+ //
+ // minMenuItem
+ //
+ this.minMenuItem.Checked = true;
+ this.minMenuItem.CheckOnClick = true;
+ this.minMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.minMenuItem.Name = "minMenuItem";
+ this.minMenuItem.Size = new System.Drawing.Size(103, 22);
+ this.minMenuItem.Text = "Min";
+ this.minMenuItem.CheckedChanged += new System.EventHandler(this.minToolStripMenuItem_CheckedChanged);
+ //
+ // maxMenuItem
+ //
+ this.maxMenuItem.Checked = true;
+ this.maxMenuItem.CheckOnClick = true;
+ this.maxMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.maxMenuItem.Name = "maxMenuItem";
+ this.maxMenuItem.Size = new System.Drawing.Size(103, 22);
+ this.maxMenuItem.Text = "Max";
+ this.maxMenuItem.CheckedChanged += new System.EventHandler(this.maxToolStripMenuItem_CheckedChanged);
+ //
+ // limitMenuItem
+ //
+ this.limitMenuItem.Checked = true;
+ this.limitMenuItem.CheckOnClick = true;
+ this.limitMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.limitMenuItem.Name = "limitMenuItem";
+ this.limitMenuItem.Size = new System.Drawing.Size(103, 22);
+ this.limitMenuItem.Text = "Limit";
+ this.limitMenuItem.CheckedChanged += new System.EventHandler(this.limitToolStripMenuItem_CheckedChanged);
+ //
+ // menuStrip
+ //
+ this.menuStrip.Items.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.fileToolStripMenuItem,
+ this.viewToolStripMenuItem,
+ this.optionsToolStripMenuItem,
+ this.helpToolStripMenuItem});
+ this.menuStrip.Location = new System.Drawing.Point(0, 0);
+ this.menuStrip.Name = "menuStrip";
+ this.menuStrip.Padding = new System.Windows.Forms.Padding(7, 2, 0, 2);
+ this.menuStrip.Size = new System.Drawing.Size(478, 24);
+ this.menuStrip.TabIndex = 1;
+ this.menuStrip.Text = "menuStrip1";
+ //
+ // fileToolStripMenuItem
+ //
+ this.fileToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.saveReportToolStripMenuItem,
+ this.exitToolStripMenuItem});
+ this.fileToolStripMenuItem.Name = "fileToolStripMenuItem";
+ this.fileToolStripMenuItem.Size = new System.Drawing.Size(37, 20);
+ this.fileToolStripMenuItem.Text = "File";
+ //
+ // saveReportToolStripMenuItem
+ //
+ this.saveReportToolStripMenuItem.Name = "saveReportToolStripMenuItem";
+ this.saveReportToolStripMenuItem.Size = new System.Drawing.Size(136, 22);
+ this.saveReportToolStripMenuItem.Text = "Save Report";
+ this.saveReportToolStripMenuItem.Click += new System.EventHandler(this.saveReportToolStripMenuItem_Click);
+ //
+ // exitToolStripMenuItem
+ //
+ this.exitToolStripMenuItem.Name = "exitToolStripMenuItem";
+ this.exitToolStripMenuItem.Size = new System.Drawing.Size(136, 22);
+ this.exitToolStripMenuItem.Text = "Exit";
+ this.exitToolStripMenuItem.Click += new System.EventHandler(this.exitToolStripMenuItem_Click);
+ //
+ // viewToolStripMenuItem
+ //
+ this.viewToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.sensorsToolStripMenuItem,
+ this.toolStripMenuItem1,
+ this.plotMenuItem});
+ this.viewToolStripMenuItem.Name = "viewToolStripMenuItem";
+ this.viewToolStripMenuItem.Size = new System.Drawing.Size(44, 20);
+ this.viewToolStripMenuItem.Text = "View";
+ //
+ // sensorsToolStripMenuItem
+ //
+ this.sensorsToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.voltMenuItem,
+ this.clocksMenuItem,
+ this.tempMenuItem,
+ this.fansMenuItem});
+ this.sensorsToolStripMenuItem.Name = "sensorsToolStripMenuItem";
+ this.sensorsToolStripMenuItem.Size = new System.Drawing.Size(114, 22);
+ this.sensorsToolStripMenuItem.Text = "Sensors";
+ //
+ // voltMenuItem
+ //
+ this.voltMenuItem.Checked = true;
+ this.voltMenuItem.CheckOnClick = true;
+ this.voltMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.voltMenuItem.Name = "voltMenuItem";
+ this.voltMenuItem.Size = new System.Drawing.Size(147, 22);
+ this.voltMenuItem.Text = "Voltages";
+ this.voltMenuItem.CheckedChanged += new System.EventHandler(this.UpdateSensorTypeChecked);
+ //
+ // clocksMenuItem
+ //
+ this.clocksMenuItem.Checked = true;
+ this.clocksMenuItem.CheckOnClick = true;
+ this.clocksMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.clocksMenuItem.Name = "clocksMenuItem";
+ this.clocksMenuItem.Size = new System.Drawing.Size(147, 22);
+ this.clocksMenuItem.Text = "Clocks";
+ this.clocksMenuItem.CheckedChanged += new System.EventHandler(this.UpdateSensorTypeChecked);
+ //
+ // tempMenuItem
+ //
+ this.tempMenuItem.Checked = true;
+ this.tempMenuItem.CheckOnClick = true;
+ this.tempMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.tempMenuItem.Name = "tempMenuItem";
+ this.tempMenuItem.Size = new System.Drawing.Size(147, 22);
+ this.tempMenuItem.Text = "Temperatures";
+ this.tempMenuItem.CheckedChanged += new System.EventHandler(this.UpdateSensorTypeChecked);
+ //
+ // fansMenuItem
+ //
+ this.fansMenuItem.Checked = true;
+ this.fansMenuItem.CheckOnClick = true;
+ this.fansMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.fansMenuItem.Name = "fansMenuItem";
+ this.fansMenuItem.Size = new System.Drawing.Size(147, 22);
+ this.fansMenuItem.Text = "Fans";
+ this.fansMenuItem.CheckedChanged += new System.EventHandler(this.UpdateSensorTypeChecked);
+ //
+ // toolStripMenuItem1
+ //
+ this.toolStripMenuItem1.Name = "toolStripMenuItem1";
+ this.toolStripMenuItem1.Size = new System.Drawing.Size(111, 6);
+ //
+ // plotMenuItem
+ //
+ this.plotMenuItem.Checked = true;
+ this.plotMenuItem.CheckOnClick = true;
+ this.plotMenuItem.CheckState = System.Windows.Forms.CheckState.Checked;
+ this.plotMenuItem.Name = "plotMenuItem";
+ this.plotMenuItem.Size = new System.Drawing.Size(114, 22);
+ this.plotMenuItem.Text = "Plot";
+ this.plotMenuItem.CheckedChanged += new System.EventHandler(this.plotToolStripMenuItem_CheckedChanged);
+ //
+ // optionsToolStripMenuItem
+ //
+ this.optionsToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.hddMenuItem});
+ this.optionsToolStripMenuItem.Name = "optionsToolStripMenuItem";
+ this.optionsToolStripMenuItem.Size = new System.Drawing.Size(61, 20);
+ this.optionsToolStripMenuItem.Text = "Options";
+ //
+ // hddMenuItem
+ //
+ this.hddMenuItem.CheckOnClick = true;
+ this.hddMenuItem.Name = "hddMenuItem";
+ this.hddMenuItem.Size = new System.Drawing.Size(141, 22);
+ this.hddMenuItem.Text = "HDD sensors";
+ this.hddMenuItem.CheckedChanged += new System.EventHandler(this.hddsensorsToolStripMenuItem_CheckedChanged);
+ //
+ // helpToolStripMenuItem
+ //
+ this.helpToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
+ this.aboutToolStripMenuItem});
+ this.helpToolStripMenuItem.Name = "helpToolStripMenuItem";
+ this.helpToolStripMenuItem.Size = new System.Drawing.Size(44, 20);
+ this.helpToolStripMenuItem.Text = "Help";
+ //
+ // aboutToolStripMenuItem
+ //
+ this.aboutToolStripMenuItem.Name = "aboutToolStripMenuItem";
+ this.aboutToolStripMenuItem.Size = new System.Drawing.Size(107, 22);
+ this.aboutToolStripMenuItem.Text = "About";
+ this.aboutToolStripMenuItem.Click += new System.EventHandler(this.aboutToolStripMenuItem_Click);
+ //
+ // timer
+ //
+ this.timer.Interval = 1000;
+ this.timer.Tick += new System.EventHandler(this.timer_Tick);
+ //
+ // splitContainer
+ //
+ this.splitContainer.Dock = System.Windows.Forms.DockStyle.Fill;
+ this.splitContainer.Location = new System.Drawing.Point(0, 24);
+ this.splitContainer.Name = "splitContainer";
+ this.splitContainer.Orientation = System.Windows.Forms.Orientation.Horizontal;
+ //
+ // splitContainer.Panel1
+ //
+ this.splitContainer.Panel1.Controls.Add(this.treeView);
+ //
+ // splitContainer.Panel2
+ //
+ this.splitContainer.Panel2.Controls.Add(this.plotPanel);
+ this.splitContainer.Panel2.Cursor = System.Windows.Forms.Cursors.Default;
+ this.splitContainer.Size = new System.Drawing.Size(478, 768);
+ this.splitContainer.SplitterDistance = 567;
+ this.splitContainer.SplitterWidth = 3;
+ this.splitContainer.TabIndex = 3;
+ //
+ // plotPanel
+ //
+ this.plotPanel.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
+ this.plotPanel.Dock = System.Windows.Forms.DockStyle.Fill;
+ this.plotPanel.Font = new System.Drawing.Font("Segoe UI", 9F);
+ this.plotPanel.Location = new System.Drawing.Point(0, 0);
+ this.plotPanel.Name = "plotPanel";
+ this.plotPanel.Size = new System.Drawing.Size(478, 198);
+ this.plotPanel.TabIndex = 0;
+ //
+ // MainForm
+ //
+ this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 15F);
+ this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+ this.ClientSize = new System.Drawing.Size(478, 792);
+ this.Controls.Add(this.splitContainer);
+ this.Controls.Add(this.menuStrip);
+ this.Font = new System.Drawing.Font("Segoe UI", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+ this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
+ this.MainMenuStrip = this.menuStrip;
+ this.Name = "MainForm";
+ this.StartPosition = System.Windows.Forms.FormStartPosition.Manual;
+ this.Text = "Open Hardware Monitor";
+ this.FormClosed += new System.Windows.Forms.FormClosedEventHandler(this.MainForm_FormClosed);
+ this.columnsContextMenuStrip.ResumeLayout(false);
+ this.menuStrip.ResumeLayout(false);
+ this.menuStrip.PerformLayout();
+ this.splitContainer.Panel1.ResumeLayout(false);
+ this.splitContainer.Panel2.ResumeLayout(false);
+ this.splitContainer.ResumeLayout(false);
+ this.ResumeLayout(false);
+ this.PerformLayout();
+
+ }
+
+ #endregion
+
+ private Aga.Controls.Tree.TreeViewAdv treeView;
+ private System.Windows.Forms.MenuStrip menuStrip;
+ private System.Windows.Forms.ToolStripMenuItem fileToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem exitToolStripMenuItem;
+ private Aga.Controls.Tree.TreeColumn sensor;
+ private Aga.Controls.Tree.TreeColumn value;
+ private Aga.Controls.Tree.TreeColumn min;
+ private Aga.Controls.Tree.TreeColumn max;
+ private Aga.Controls.Tree.NodeControls.NodeIcon nodeImage;
+ private Aga.Controls.Tree.NodeControls.NodeTextBox nodeTextBoxText;
+ private Aga.Controls.Tree.NodeControls.NodeTextBox nodeTextBoxValue;
+ private Aga.Controls.Tree.NodeControls.NodeTextBox nodeTextBoxMin;
+ private Aga.Controls.Tree.NodeControls.NodeTextBox nodeTextBoxMax;
+ private System.Windows.Forms.Timer timer;
+ private System.Windows.Forms.SplitContainer splitContainer;
+ private PlotPanel plotPanel;
+ private System.Windows.Forms.ToolStripMenuItem viewToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem plotMenuItem;
+ private Aga.Controls.Tree.NodeControls.NodeCheckBox nodeCheckBox;
+ private System.Windows.Forms.ToolStripMenuItem helpToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem aboutToolStripMenuItem;
+ private Aga.Controls.Tree.TreeColumn limit;
+ private Aga.Controls.Tree.NodeControls.NodeTextBox nodeTextBoxLimit;
+ private System.Windows.Forms.ContextMenuStrip columnsContextMenuStrip;
+ private System.Windows.Forms.ToolStripMenuItem minMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem maxMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem limitMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem valueToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem saveReportToolStripMenuItem;
+ private System.Windows.Forms.ToolStripSeparator toolStripMenuItem1;
+ private System.Windows.Forms.ToolStripMenuItem optionsToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem sensorsToolStripMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem clocksMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem tempMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem fansMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem voltMenuItem;
+ private System.Windows.Forms.ToolStripMenuItem hddMenuItem;
+ }
+}
+
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/MainForm.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/MainForm.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,325 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Configuration;
+using System.Drawing;
+using System.Text;
+using System.Windows.Forms;
+using Aga.Controls.Tree;
+using Aga.Controls.Tree.NodeControls;
+using OpenHardwareMonitor.Hardware;
+
+namespace OpenHardwareMonitor.GUI {
+ public partial class MainForm : Form {
+
+ private Node root;
+ private List<IGroup> groupList = new List<IGroup>();
+ private TreeModel treeModel;
+ private IDictionary<ISensor, Color> sensorPlotColors =
+ new Dictionary<ISensor, Color>();
+ private Color[] plotColorPalette;
+
+ public MainForm() {
+
+ InitializeComponent();
+ this.Font = SystemFonts.MessageBoxFont;
+ treeView.Font = SystemFonts.MessageBoxFont;
+ plotPanel.Font = SystemFonts.MessageBoxFont;
+
+ nodeCheckBox.IsVisibleValueNeeded +=
+ new EventHandler<NodeControlValueEventArgs>(
+ nodeCheckBox_IsVisibleValueNeeded);
+ nodeCheckBox.CheckStateChanged +=
+ new EventHandler<TreePathEventArgs>(UpdatePlotSelection);
+ nodeTextBoxText.DrawText +=
+ new EventHandler<DrawEventArgs>(nodeTextBoxText_DrawText);
+ nodeTextBoxValue.DrawText +=
+ new EventHandler<DrawEventArgs>(nodeTextBoxText_DrawText);
+ nodeTextBoxMin.DrawText +=
+ new EventHandler<DrawEventArgs>(nodeTextBoxText_DrawText);
+ nodeTextBoxMax.DrawText +=
+ new EventHandler<DrawEventArgs>(nodeTextBoxText_DrawText);
+ nodeTextBoxLimit.DrawText +=
+ new EventHandler<DrawEventArgs>(nodeTextBoxLimit_DrawText);
+
+ if (Utilities.Config.Contains("mainForm.Location.X")) {
+ int x = Utilities.Config.Get("mainForm.Location.X", Location.X);
+ x = x < 0 ? 0 : x;
+ int y = Utilities.Config.Get("mainForm.Location.Y", Location.Y);
+ y = y < 0 ? 0 : y;
+ this.Location = new Point(x, y);
+ } else {
+ StartPosition = FormStartPosition.CenterScreen;
+ }
+
+ Width = Utilities.Config.Get("mainForm.Width", Width);
+ Height = Utilities.Config.Get("mainForm.Height", Height);
+
+ treeModel = new TreeModel();
+ root = new Node(System.Environment.MachineName);
+ root.Image = Utilities.EmbeddedResources.GetImage("computer.png");
+
+ treeModel.Nodes.Add(root);
+ treeView.Model = treeModel;
+
+ AddGroup(new Hardware.SMBIOS.SMBIOSGroup());
+ AddGroup(new Hardware.LPC.LPCGroup());
+ AddGroup(new Hardware.CPU.CPUGroup());
+ AddGroup(new Hardware.ATI.ATIGroup());
+ AddGroup(new Hardware.Nvidia.NvidiaGroup());
+ AddGroup(new Hardware.TBalancer.TBalancerGroup());
+
+ plotColorPalette = new Color[14];
+ plotColorPalette[0] = Color.Blue;
+ plotColorPalette[1] = Color.OrangeRed;
+ plotColorPalette[2] = Color.Green;
+ plotColorPalette[3] = Color.LightSeaGreen;
+ plotColorPalette[4] = Color.Goldenrod;
+ plotColorPalette[5] = Color.DarkViolet;
+ plotColorPalette[6] = Color.YellowGreen;
+ plotColorPalette[7] = Color.SaddleBrown;
+ plotColorPalette[8] = Color.Gray;
+ plotColorPalette[9] = Color.RoyalBlue;
+ plotColorPalette[10] = Color.DeepPink;
+ plotColorPalette[11] = Color.MediumSeaGreen;
+ plotColorPalette[12] = Color.Olive;
+ plotColorPalette[13] = Color.Firebrick;
+
+ plotMenuItem.Checked = Utilities.Config.Get(plotMenuItem.Name, false);
+ minMenuItem.Checked = Utilities.Config.Get(minMenuItem.Name, false);
+ maxMenuItem.Checked = Utilities.Config.Get(maxMenuItem.Name, true);
+ limitMenuItem.Checked = Utilities.Config.Get(limitMenuItem.Name, false);
+ hddMenuItem.Checked = Utilities.Config.Get(hddMenuItem.Name, false);
+
+ voltMenuItem.Checked = Utilities.Config.Get(voltMenuItem.Name, true);
+ clocksMenuItem.Checked = Utilities.Config.Get(clocksMenuItem.Name, true);
+ tempMenuItem.Checked = Utilities.Config.Get(tempMenuItem.Name, true);
+ fansMenuItem.Checked = Utilities.Config.Get(fansMenuItem.Name, true);
+
+ timer.Enabled = true;
+ }
+
+ private void AddGroup(IGroup group) {
+ groupList.Add(group);
+ foreach (IHardware hardware in group.Hardware)
+ root.Nodes.Add(new HardwareNode(hardware));
+ }
+
+ private void RemoveGroup(IGroup group) {
+ List<Node> nodesToRemove = new List<Node>();
+ foreach (IHardware hardware in group.Hardware)
+ foreach (Node node in root.Nodes) {
+ HardwareNode hardwareNode = node as HardwareNode;
+ if (hardwareNode != null && hardwareNode.Hardware == hardware)
+ nodesToRemove.Add(node);
+ }
+ foreach (Node node in nodesToRemove)
+ root.Nodes.Remove(node);
+ groupList.Remove(group);
+ }
+
+ private void nodeTextBoxLimit_DrawText(object sender, DrawEventArgs e) {
+ SensorNode sensorNode = e.Node.Tag as SensorNode;
+ if (sensorNode != null)
+ e.Text = sensorNode.ValueToString(sensorNode.Sensor.Limit);
+ }
+
+ private void nodeTextBoxText_DrawText(object sender, DrawEventArgs e) {
+ if (!plotMenuItem.Checked)
+ return;
+
+ SensorNode sensorNode = e.Node.Tag as SensorNode;
+ if (sensorNode != null) {
+ Color color;
+ if (sensorPlotColors.TryGetValue(sensorNode.Sensor, out color))
+ e.TextColor = color;
+ }
+ }
+
+ private void UpdatePlotSelection(object sender,
+ TreePathEventArgs e)
+ {
+ List<ISensor> selected = new List<ISensor>();
+ IDictionary<ISensor, Color> colors = new Dictionary<ISensor, Color>();
+ int colorIndex = 0;
+ foreach (TreeNodeAdv node in treeView.AllNodes) {
+ SensorNode sensorNode = node.Tag as SensorNode;
+ if (sensorNode != null &&
+ sensorNode.Sensor.SensorType == SensorType.Temperature) {
+ if (sensorNode.Plot) {
+ colors.Add(sensorNode.Sensor,
+ plotColorPalette[colorIndex % plotColorPalette.Length]);
+ selected.Add(sensorNode.Sensor);
+ }
+ colorIndex++;
+ }
+ }
+ sensorPlotColors = colors;
+ plotPanel.SetSensors(selected, colors);
+ }
+
+ private void nodeCheckBox_IsVisibleValueNeeded(object sender,
+ NodeControlValueEventArgs e) {
+ SensorNode node = e.Node.Tag as SensorNode;
+ e.Value = (node != null) &&
+ (node.Sensor.SensorType == SensorType.Temperature) &&
+ plotMenuItem.Checked;
+ }
+
+ private void exitToolStripMenuItem_Click(object sender, EventArgs e) {
+ Close();
+ }
+
+ private void timer_Tick(object sender, EventArgs e) {
+
+ #if !DEBUG
+ try {
+ #endif
+ foreach (IGroup group in groupList)
+ foreach (IHardware hardware in group.Hardware)
+ hardware.Update();
+ #if !DEBUG
+ } catch (Exception exception) {
+ Utilities.CrashReport.Save(exception);
+ Close();
+ }
+ #endif
+
+ treeView.Invalidate();
+ plotPanel.Invalidate();
+ }
+
+ private void MainForm_FormClosed(object sender, FormClosedEventArgs e) {
+ Utilities.Config.Set(plotMenuItem.Name, plotMenuItem.Checked);
+ Utilities.Config.Set(minMenuItem.Name, minMenuItem.Checked);
+ Utilities.Config.Set(maxMenuItem.Name, maxMenuItem.Checked);
+ Utilities.Config.Set(limitMenuItem.Name, limitMenuItem.Checked);
+ Utilities.Config.Set(hddMenuItem.Name, hddMenuItem.Checked);
+
+ Utilities.Config.Set(voltMenuItem.Name, voltMenuItem.Checked);
+ Utilities.Config.Set(clocksMenuItem.Name, clocksMenuItem.Checked);
+ Utilities.Config.Set(tempMenuItem.Name, tempMenuItem.Checked);
+ Utilities.Config.Set(fansMenuItem.Name, fansMenuItem.Checked);
+
+ Utilities.Config.Set("mainForm.Location.X", Location.X);
+ Utilities.Config.Set("mainForm.Location.Y", Location.Y);
+ Utilities.Config.Set("mainForm.Width", Width);
+ Utilities.Config.Set("mainForm.Height", Height);
+
+ foreach (IGroup group in groupList)
+ group.Close();
+ }
+
+ private void aboutToolStripMenuItem_Click(object sender, EventArgs e) {
+ new AboutBox().ShowDialog();
+ }
+
+ private void plotToolStripMenuItem_CheckedChanged(object sender,
+ EventArgs e)
+ {
+ splitContainer.Panel2Collapsed = !plotMenuItem.Checked;
+ treeView.Invalidate();
+ }
+
+ private void valueToolStripMenuItem_CheckedChanged(object sender,
+ EventArgs e)
+ {
+ treeView.Columns[1].IsVisible = valueToolStripMenuItem.Checked;
+ }
+
+ private void minToolStripMenuItem_CheckedChanged(object sender, EventArgs e)
+ {
+ treeView.Columns[2].IsVisible = minMenuItem.Checked;
+ }
+
+ private void maxToolStripMenuItem_CheckedChanged(object sender, EventArgs e)
+ {
+ treeView.Columns[3].IsVisible = maxMenuItem.Checked;
+ }
+
+ private void limitToolStripMenuItem_CheckedChanged(object sender,
+ EventArgs e) {
+ treeView.Columns[4].IsVisible = limitMenuItem.Checked;
+ }
+
+ private void treeView_Click(object sender, EventArgs e) {
+
+ MouseEventArgs m = e as MouseEventArgs;
+ if (m == null || m.Button != MouseButtons.Right)
+ return;
+
+ NodeControlInfo info = treeView.GetNodeControlInfoAt(new Point(m.X, m.Y));
+ if (info.Control == null)
+ columnsContextMenuStrip.Show(treeView, m.X, m.Y);
+ }
+
+ private void saveReportToolStripMenuItem_Click(object sender, EventArgs e) {
+ ReportWriter.Save(groupList, new Version(Application.ProductVersion));
+ }
+
+ private void hddsensorsToolStripMenuItem_CheckedChanged(object sender,
+ EventArgs e)
+ {
+ if (hddMenuItem.Checked) {
+ AddGroup(new Hardware.HDD.HDDGroup());
+ UpdateSensorTypeChecked(null, null);
+ } else {
+ List<IGroup> groupsToRemove = new List<IGroup>();
+ foreach (IGroup group in groupList)
+ if (group is Hardware.HDD.HDDGroup)
+ groupsToRemove.Add(group);
+ foreach (IGroup group in groupsToRemove) {
+ group.Close();
+ RemoveGroup(group);
+ }
+ UpdatePlotSelection(null, null);
+ }
+ }
+
+ private void UpdateSensorTypeChecked(object sender, EventArgs e) {
+ foreach (HardwareNode node in root.Nodes) {
+ node.SetVisible(SensorType.Voltage, voltMenuItem.Checked);
+ node.SetVisible(SensorType.Clock, clocksMenuItem.Checked);
+ node.SetVisible(SensorType.Temperature, tempMenuItem.Checked);
+ node.SetVisible(SensorType.Fan, fansMenuItem.Checked);
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/MainForm.resources
Binary file GUI/MainForm.resources has changed
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/MainForm.resx
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/MainForm.resx Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,393 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+ <!--
+ Microsoft ResX Schema
+
+ Version 2.0
+
+ The primary goals of this format is to allow a simple XML format
+ that is mostly human readable. The generation and parsing of the
+ various data types are done through the TypeConverter classes
+ associated with the data types.
+
+ Example:
+
+ ... ado.net/XML headers & schema ...
+ <resheader name="resmimetype">text/microsoft-resx</resheader>
+ <resheader name="version">2.0</resheader>
+ <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+ <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+ <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+ <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+ <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+ <value>[base64 mime encoded serialized .NET Framework object]</value>
+ </data>
+ <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+ <comment>This is a comment</comment>
+ </data>
+
+ There are any number of "resheader" rows that contain simple
+ name/value pairs.
+
+ Each data row contains a name, and value. The row also contains a
+ type or mimetype. Type corresponds to a .NET class that support
+ text/value conversion through the TypeConverter architecture.
+ Classes that don't support this are serialized and stored with the
+ mimetype set.
+
+ The mimetype is used for serialized objects, and tells the
+ ResXResourceReader how to depersist the object. This is currently not
+ extensible. For a given mimetype the value must be set accordingly:
+
+ Note - application/x-microsoft.net.object.binary.base64 is the format
+ that the ResXResourceWriter will generate, however the reader can
+ read any of the formats listed below.
+
+ mimetype: application/x-microsoft.net.object.binary.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.soap.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.bytearray.base64
+ value : The object must be serialized into a byte array
+ : using a System.ComponentModel.TypeConverter
+ : and then encoded with base64 encoding.
+ -->
+ <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+ <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+ <xsd:element name="root" msdata:IsDataSet="true">
+ <xsd:complexType>
+ <xsd:choice maxOccurs="unbounded">
+ <xsd:element name="metadata">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" />
+ </xsd:sequence>
+ <xsd:attribute name="name" use="required" type="xsd:string" />
+ <xsd:attribute name="type" type="xsd:string" />
+ <xsd:attribute name="mimetype" type="xsd:string" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="assembly">
+ <xsd:complexType>
+ <xsd:attribute name="alias" type="xsd:string" />
+ <xsd:attribute name="name" type="xsd:string" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="data">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+ <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+ <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="resheader">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" />
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:choice>
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:schema>
+ <resheader name="resmimetype">
+ <value>text/microsoft-resx</value>
+ </resheader>
+ <resheader name="version">
+ <value>2.0</value>
+ </resheader>
+ <resheader name="reader">
+ <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <resheader name="writer">
+ <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <metadata name="columnsContextMenuStrip.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+ <value>204, 15</value>
+ </metadata>
+ <metadata name="menuStrip.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+ <value>17, 17</value>
+ </metadata>
+ <metadata name="timer.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+ <value>124, 15</value>
+ </metadata>
+ <metadata name="$this.TrayHeight" type="System.Int32, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+ <value>55</value>
+ </metadata>
+ <assembly alias="System.Drawing" name="System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
+ <data name="$this.Icon" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>
+ AAABAAMAEBAAAAEACABoBQAANgAAACAgAAABACAAqBAAAJ4FAAAwMAAAAQAgAKglAABGFgAAKAAAABAA
+ AAAgAAAAAQAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABMTFAAYGBkAFxkZABkZGQAXGhoAGhoaABkb
+ GwAbGxsAGxwcABwcHAAbHR0AHR0dAB0dHgAeHh4AIB4eAB0gIAAgICAAIiEhACMhIQAiIiIAJSMjAB4k
+ JAAjJCQAIiQlACYmJgAqJiYAJCcnACcnJwApJycAKCgoACcpKQAqKioAKysqACQrLQArKysAKSssAB4s
+ LgAfLC4AKS0sACwtLQAvLS0AIC4xADAtMAAxLi4ALy8vACswMAAxMTEAMDIzADQyMgAyMzMAMzMzADQ0
+ MgA0NDQANTU1ADU2NgA2NjYAOzc1ADg4OABAODcAOTk5ADo5OQA5OjoAKjs9ADo8PAA8PDwAPT09ACE/
+ QwAoQEMAPz8/ADtAPgBDPz8AQ0BAAEBBQQBBQUEAIkJJACVCSAAnQ0gAKENKAENDQgBEREQAJkVMAEVF
+ RQBFSEkASEhIACVJUgBDSUoATExLAExMTABNTUoATU1NAE5OTgBET1IAT09PAFJPTwBQUFAAUVFRAFJR
+ UgBSUlIAUVNTAFJTUwBTU1MAVFRUAFVVVQBMV1kAV1dXAFlXWQBRWFkAV1hYAFlZWQBdW1oAW1tbAFxc
+ XABeXl4AX19fAGFfXwBgX2AAYWJhAGJiYgBkZGUAZWRlAGVlZQBmZmYAaGhoAGlpaABpaWkAbGxrAGxs
+ bAAqb30AbW1tACtvfgBubm4Ab29vAHBwcABwcXEAd3d3AHd4eAB5eXkAenp6AHx8fAB+fn4AgICAAICB
+ gQCBgYEAg4SDAIaFhgCGh4YAh4eHAIeIiACLiYkAioqKAIuLiwCOjo4Aj4+PAJGRkQCSkpMAk5SUAJSU
+ lACVlZUAlpaWAJiYmACampoAnJycAJ6engCfn58AoKCgAKGhoQCioqIAC6fJAKGjpACkpKQApaWlAKWm
+ pACmpqYAqaepAKqoqgCpq6kAqquqAK2trQCsra8Ar62vAK6urACxsbEAsrKyALOzswC0tbQAtbW1ALa2
+ tgC3t7cAuri6ALy8vAC9vb0Avr++AL+/vwDBwcEAwsLCAMTExADFxcUAyMXIAMjIyADKysoAy8rLAMzM
+ zADQ0NAA0tLSANra2gDd3d0A4uHiAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABjW1VIQDk0LCIbFw8KBgQAZ6d/RTk1
+ MzAuK0xQS0pCAmqBOjg9MioiGxIVJCUpIQFrUkaNmZCLhoR6cm1HDhQDblNZpLaspp+Zk4yIbxAYBXBT
+ XKm5tKuinJWOiW8LGwd1V2KxwbqupJ2YkYxxCx0IeF1lu8e/s6igm5aPdAwiCXthaL7Lw7Wqo5+YkncN
+ Hw19ZmjDzMa9ta2hmZR5ECAQgmhpxc3IwLivopqWehMfEYNsb8nOysS8sqWel34cJhaEbGSuwrewpZ6W
+ jIdsGUMahWhfWmZeWFNOQTw3KC1NHoRfYVZTUUlBPzs1MSg+VCOKgHx2c29oYFlTT0Q7Ni8nAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACgA
+ AAAgAAAAQAAAAAEAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwMDAQcH
+ BwMGBgYEBgYGBAYGBgQGBgYEBgYGBAYGBgQGBgYEBgYGBAYGBgQGBgYEBgYGBAYGBgQGBgYEBgYGBAYG
+ BgQGBgYEBgYGBAYGBgQGBgYEBgYGBAYGBgQGBgYEBgYGBAcHBwMFBQUCAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAKCgoJDAwMIA0NDSoNDQ0qDQ0NKg0NDSoNDQ0qDQ0NKg0NDSoNDQ0qDQ0NKg0NDSoNDQ0qDQ0NKg0N
+ DSoNDQ0qDQ0NKg0NDSoNDQ0qDQ0NKg0NDSoNDQ0qDQ0NKg0NDSoNDQ0qDAwMJQoKChEFBQUCAAAAAAAA
+ AAAAAAAAAAAAAAgICBQKCgpHDAwMWwwMDFwMDAxcDAwMXAwMDFwMDQxcDQ0NXA0NDVwNDQ1cDQ0NXA0N
+ DVwNDQ1cDQ0OXA4ODlwODg5cDg4OXA4ODlwODg5cDg4OXA4ODlwODg5cDg4OXA4ODlsNDQ1SDAwMJQcH
+ BwMAAAAAAAAAAAAAAABhYWGPWVhYxVFQT9JKSUnYSEdH2EJCQtg9Pj7YOTk52Tg3NtkzMjPZLi4v2Ssr
+ K9kmJibZIyMj2SAgH9kbGxvZFxcY2RMTE9kPDg7ZDQwM2Q0MDNgNDAzYDQwM2A0NDdgNDQ3YDg0Nuw4O
+ DlsNDQ0qBgYGBAAAAAAAAAAAAAAAAGJhYb88QkP/NlJZ/zZSWf83T1T/PTw8/zw8PP86Ojr/OTk5/zg4
+ OP82Njb/NDQ0/zQ0NP8yMjL/MTEw/y8uMP8sNTj/KjY4/yc0Nf8mMjT/JDAy/yIuMP8fLC7/Hyst/x8i
+ Iv8NDQ3YDg4OXA0NDSoGBgYEAAAAAAAAAAAAAAAAY2NivzhUWv8al7L/G5Or/zNdZf8+PT3/PT09/zs7
+ O/86Ojn/Nzc4/zU2Nf80NDT/MzMz/zExMP8vLy//Li4u/ys0Nv8pNTb/JzI0/yYwM/8kLzH/Iy4w/yEs
+ Lv8fKy3/HyEi/w0NDdgODg5cDQ0NKgYGBgQAAAAAAAAAAAAAAABmZGS/Oldd/xqSrP8yZG7/QT8//z4/
+ Pv88PDz/OTk5/zY3Nv80NDX/MzIz/zIyMv8wMDD/Ly8v/y4uLv8tLCz/Kikp/yNIUP8iR1D/IUZP/yBG
+ Tv8gRk7/H0VN/x87Qf8gHx//DQ0N2A4ODlwNDQ0qBgYGBAAAAAAAAAAAAAAAAGlnaL8+Vlv/N2Fq/0ZD
+ Q/9BQED/PT09/zg3N/8yMjH/Li4u/ywsLP8rKyv/KSkp/yoqKv8oKCj/Jycn/yUlJf8lJCT/JCMj/yMh
+ If8jIiL/JCIi/yQjI/8kIyP/IiEh/yEgIP8NDQ3YDg4OXA0NDSoGBgYEAAAAAAAAAAAAAAAAampqv0lI
+ SP9IR0f/RkZG/0FBQf9GR0b/f3+A/4CAgP94eHj/cXFx/2tra/9kZGT/XV1e/1dXV/9PT0//SEhI/0ND
+ Qv9AQED/QEBA/zs7O/8mJib/IyMj/yQkJP8jIyP/IyMh/w0NDdgODg5cDQ0NKgYGBgQAAAAAAAAAAAAA
+ AABubm6/S0tL/0pKS/9ISEj/QUFB/4uLi/+srKz/oaKh/5+fnv+dm53/mJiY/5SUlP+QkI//i4uL/4WG
+ hf+AgID/e3t6/3V0df9xcXH/a2tr/zs7O/8hISL/JCQk/yQkJP8kJCP/DQ0N2A4ODlwNDQ0qBgYGBAAA
+ AAAAAAAAAAAAAHBwcL9NTU3/TE1N/0lKSv9AQD//lpaY/6urq/+op6f/pKSk/6ChoP+dnJz/mJiY/5OT
+ k/+Ojo7/iImI/4ODgv99fX3/d3d3/3Fxcf9xcXH/Pz8//yEhIf8kJCT/JSUl/yUkJP8NDQ3ZDg4OXA0N
+ DSoGBgYEAAAAAAAAAAAAAAAAcnJzv09OT/9OT0//TExM/0FBQf+bm5r/srKy/66urv+rq6v/p6en/6Ki
+ ov+dnZ3/mZmZ/5OTk/+Njo7/iIiH/4GBgf98e3z/dHV0/3Fxcf8/Pz//ISEh/yQkJf8lJSX/JSYm/w0N
+ DdkODg5cDQ0NKgYGBgQAAAAAAAAAAAAAAAB0dXW/UVFR/1BQUP9NTU3/QkJC/56env+4uLj/tLO0/7Gx
+ sf+tra3/qKio/6Ojo/+dnZ3/mJeX/5GSkf+MjIv/hYWF/35/f/94eHj/c3Nz/z8/P/8iIiL/JSUl/yYm
+ Jv8mJib/DQ0N2Q4ODlwNDQ0qBgYGBAAAAAAAAAAAAAAAAHZ2dr9UVFT/U1NT/09PT/9FRUX/pKSk/7+/
+ v/+7u7v/tra2/7Gxsf+pqan/o6Oj/52dnf+Xl5f/kJGR/46Njf+JiYn/goKC/3x8fP93d3f/QEBA/yIi
+ Iv8mJib/Jycn/ycnJ/8NDQ3ZDg4OXA0NDSoGBgYEAAAAAAAAAAAAAAAAeHh4v1dXVv9VVVX/UFBQ/0ZG
+ Rv+pqKn/xsbG/8HBwf+8vLz/tra2/6usrP+lpaX/n5+f/5mYmP+VlJX/kZKS/4yNjP+FhYX/f35//3p6
+ ev9BQUH/IiIj/yYmJv8oJyj/KCcn/w0NDdkODg5cDQ0NKgYGBgQAAAAAAAAAAAAAAAB6enq/WFlZ/1dX
+ V/9SUlP/SEhI/62trf/MzMz/xsbG/8HBwf+7u7v/sLCw/6mpqf+jo6P/nJ2d/5aWlv+Tk5P/j4+O/4iI
+ iP+AgYD/fHx9/0JCQv8jIyP/Jycn/ygoKP8oKCj/Dg4O2Q4ODlwNDQ0qBgYGBAAAAAAAAAAAAAAAAH18
+ fb9bW1v/WVlZ/1RVVf9ISUn/sbGx/9LS0v/Ly8v/xcXF/7+/vv+zs7P/qqqq/6SlpP+gn5//mpqa/5qY
+ mv+RkZH/i4uK/4KDg/9+fn7/QkND/yMkJP8nJyf/KSkp/ykpKf8QEBDZDg4OXA0NDSoGBgYEAAAAAAAA
+ AAAAAAAAfn5+v11dXf9bW1v/VlZW/0tJSf+zsrL/1tbW/8/Pz//Jycn/wsLC/7W1tf+ura3/p6en/6Ki
+ ov+cnJz/mZiZ/5OTk/+MjIz/hYWF/39/f/9GRUb/JCQk/ygoKP8pKSn/KSkp/xISEtkODg5cDQ0NKgYG
+ BgQAAAAAAAAAAAAAAACBgYG/Xl5e/1xcXP9XWFf/SkpK/7S0tP/a29r/0tLS/83MzP/FxcX/v7+//7i4
+ uP+xsbH/q6uq/6Ojo/+cnJz/lJWU/42Njf+GhYb/gICA/0lJSP8jIyP/KCgo/ykpKf8pKSn/FBQU2Q4O
+ DlwNDQ0qBgYGBAAAAAAAAAAAAAAAAIODg79fX1//Xl5e/1lYWf9LS0v/tLS0/93d3f/U1NT/zs7O/8fG
+ x//AwMD/ubm5/7Kysv+rq6v/pKSk/5ycnP+VlZb/jo6O/4eHh/+BgYH/TU1N/yMkJP8oKSj/Kikp/ykp
+ Kf8YGBjZDg4OXA0NDSoGBgYEAAAAAAAAAAAAAAAAhYWFv2BgX/9eXl7/WlpZ/01NTf+2trb/3t7e/9XV
+ 1f/Oz8//x8fH/8HBwf+5ubr/srKz/6ysq/+kpKT/nZ2d/5WVlv+Ojo7/h4eH/4GBgf9QUFD/JCQk/ykp
+ Kf8pKSn/KCgo/xoZGdkODg5cDQ0NKgYGBgQAAAAAAAAAAAAAAACIhoa/YGBg/15eXv9aWlr/T09P/7e3
+ t//d3d3/1NTU/87Ozv/Hx8f/wMDA/7m5uf+ysrL/q6ur/6OjpP+cnJz/lZWV/46Ojf+Ghob/gYGB/1NT
+ U/8mJib/Kioq/yorKv8oKCn/Gxwc2A4ODlwNDQ0qBgYGBAAAAAAAAAAAAAAAAIqKir9fX1//Xl5e/1pb
+ Wv9RUVH/rKys/+Li4v/S0tL/zM3M/8XFxv+/v7//uLm4/7Kysf+rq6v/pKSk/52dnf+VlZX/jY6O/4eG
+ h/+BgYH/U1JS/ykpKf8sLCz/Ki8x/ycuL/8eHh7YDQ0NXA0NDSoGBgYEAAAAAAAAAAAAAAAAjIuMv15e
+ Xv9dXV3/Wlpa/1VVVf9cXFz/qqqq/7Gxsf+urq7/qqqq/6Sko/+dnZ3/lZWV/46Ojv+Hh4f/gH9//3d5
+ d/9wcHD/aWlp/1xcXP8zMzP/LCws/y0tLf8rMDH/Jy0u/yAgINgNDQ1cDQ0NKgYGBgQAAAAAAAAAAAAA
+ AACOjo6/XFxc/1xcXP9aWlr/VldX/1BRUP9MTEv/R0dH/0RERP9AQUD/Pj4+/zw8PP86Ozr/ODg4/zg4
+ OP81NTX/MzMz/zExMf8wMDD/Li4v/y4uLv8uLS//Kj1A/yg5Pv8lODv/IyIi2A0NDVwNDQ0qBgYGBAAA
+ AAAAAAAAAAAAAJGRkb9aW1v/W1ta/1hZWP9WVlb/VFRU/1BQUP9OTk7/TExM/0pJSv9HR0f/RUVF/0JC
+ Qv9AQED/Pj4+/zw8PP86Ojr/Nzg3/zU1Nf8yMjL/MTEx/y8uLv8pOz//KDtA/yU6QP8lJCTYDQ0NWw0N
+ DSoHBwcEAAAAAAAAAAAAAAAAk5OTv1hYWP9ZWVn/WFdY/1VVVf9SUlL/UFBQ/05OTv9NTE3/SkpK/0hI
+ SP9GRkb/Q0JD/0BBQP8/Pz//PT09/zs7Ov84ODj/NjU1/zMzM/8xMTH/Ly4t/yFbZ/8qLzH/Jy4v/ygo
+ KNIMDAxHDAwMIAcHBwMAAAAAAAAAAAAAAACSk5K/VVRV/1RVVf9UVFT/UlFR/09PT/9NTU7/TEtM/0pK
+ Sv9ISUj/R0dH/0RFRP9BQUH/Pz8//z4+Pv87Ozz/OTo5/zc3N/80NDT/MTEx/y8wMP8uLi7/LSws/ykv
+ MP8lLS7/LS0txQoKChQKCgoJAwMDAQAAAAAAAAAAAAAAAJeWl4+SkpK/kJCQv42Li7+Hh4e/hISEv4CA
+ gL98fHy/d3d3v3R0dL9wcHC/bGpsv2ZmZr9jY2O/X19fv1tbW79VVVW/UlJSv05OTr9KSkq/REREv0FB
+ Qb89PT2/OTk5vzMzM78xMTGPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA////////
+ ////////4AAAB+AAAAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AA
+ AAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AAAAfgAAAH4AAAB+AAAAf/////////////
+ //8oAAAAMAAAAGAAAAABACAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAA
+ AAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAA
+ AAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAQAAAAEAAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAggICAcJCQkMCAgIDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcH
+ Bw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcH
+ Bw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDgcHBw4HBwcOBwcHDggICA4JCQkMCAgIBwAA
+ AAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAgIBwsLCxkNDQ0sDQ0NMg0NDTMNDQ0zDQ0NMw0N
+ DTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0N
+ DTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0NDTMNDQ0zDQ0NMw0N
+ DTINDQ0sCwsLGggICAcAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABCQkJDA0NDSwNDQ1MDg4OVw4O
+ DlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4O
+ DlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4ODlkODg5ZDg4OWQ4O
+ DlkODg5ZDg4OWQ4ODlcNDQ1MDQ0NLAkJCQwAAAABAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABBQUFDgoK
+ CjILCwtXCwsLZAsLC2YLCwtmCwsLZgsLC2YMDAxmDAwMZgwMDGYMDAxmDAwMZgwMDGYMDAxmDAwMZgwM
+ DGYNDQ1mDQ0NZg0NDWYNDQ1mDQ0NZg0NDWYNDQ1mDQ0NZg4ODmYODg5mDg4OZg4ODmYODg5mDg4OZg4O
+ DmYODg5mDg4OZg4ODmYODg5mDg4OZg4ODmQODg5XDQ0NMggICA4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AABiYmL/XFxc/1paWv9VVVf/U1NS/1FRUf9OTk7/S0pL/0dHR/9DQ0P/QUFB/z8+P/88PDz/Ojk5/zU1
+ Nf8yMjL/MDAw/y0tLv8qKir/JiYm/yQjJP8hISH/Hh4e/xsbHP8ZGRn/FBQU/xEREf8PDw//Dg4O/w4O
+ Dv8ODg7/Dg4O/w4ODv8ODg7/Dg4O/w4ODv8ODg7/Dw8P/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAABiYmH/Pjw8/z88O/9AOzr/QDs6/z86Of89Ojr/PTo6/zs7O/86Ozr/Ozo7/zo6
+ Ov85OTn/ODg4/zc3N/82NjX/NTU0/zMzM/8yMjL/MTEx/zEyMf8wMDD/MDAw/y8uLv8uLS3/LCor/yoo
+ KP8pJyf/KCYl/yYkJP8lIyP/JCIh/yIhIP8gHh7/IB4d/yAdHf8fHh7/Dg4O/w4ODmYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABjY2P/QT49/xqYs/8blrD/Gpaw/xqXsv8igpb/Pj09/z09
+ Pf88PDz/Ozs7/zo6Ov85OTn/ODg4/zc3N/82Njb/NDQ0/zMzM/8zMjL/MjEx/zAxMP8vLy//Ly8v/y4u
+ Lf8iVmH/IVRf/yFUX/8fU13/IFNd/x9TXP8fUVz/HlBb/x5RW/8dUFr/HE9Z/xxQW/8fHh7/Dg4O/w4O
+ DmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABkZGT/Qj08/xqVr/8ckqv/G5St/yR/
+ kv9APDv/Pz4+/z49Pv89PDz/Ozs7/zo6Ov85OTn/ODg4/zY3N/81NTX/NDQ0/zMzM/8yMjL/MTEx/zAw
+ L/8vLy//Li4u/y0tLP8sKir/LSko/yomJv8pJSX/JyQj/ygiIv8mIiH/JSAg/yQfHv8jHhz/Ih0c/x8d
+ Hf8fHh//Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABlZWX/RkFA/xqW
+ sP8blK3/JICT/0I+Pf9APz//Pz4//z4+Pv88PDz/Ojo6/zk5Of83Nzf/NjU2/zQ0NP8zMzP/MjIy/zEx
+ Mf8wMDD/Ly8w/y8vL/8uLi7/LS0t/ywsLP8rKyr/IFVf/x9TXf8fVF3/IFNd/x9TXP8fUVz/H1Fc/x5R
+ W/8eUFv/HVBb/x8eH/8fHyD/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AABmZmb/RkJC/xmXsf8lgZP/RkFB/0JBQf9BQUD/Pz8//z09Pf86Ozr/ODg4/zU2Nf8zMzP/MjIy/zEx
+ Mf8wMDD/Ly8v/y8vL/8uLi7/Li4u/y0tLf8rKyv/Kior/ykpKf8oJyf/JyYm/yYkJP8mIyT/JSMj/yUi
+ I/8lIyP/JCIi/yQiIv8jISL/IiEg/yEfIP8fHx//Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAABoaGj/SEVF/ySDmP9HQ0L/R0VF/0NDQ/9BQUD/Pz8+/zs6O/82Njb/MTEx/y4u
+ Lv8sLC3/LS0t/ywsLP8rKyv/KSop/ykpKf8oKCj/KCgo/ycnJ/8nJib/JSUl/yUkJf8kJCT/IyQj/yMi
+ I/8iIiL/IiMi/yMjI/8kIyT/JCQk/yMjJP8jIyP/IyMj/yIiIf8gICD/Dg4O/w4ODmYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABpamr/SEdH/0lHR/9JR0f/R0dG/0RERf9BQUH/PDw8/z4/
+ P/99e33/dXV1/3BwcP9ra2v/ZWRl/2BfX/9aWlr/VVVW/1FRUf9MTEz/R0dH/0FBQf8+PDz/Nzg3/zMz
+ M/8wMDD/MDAw/y8vMP8wMDD/MTAx/ycnJ/8hISL/IyMj/yQkJP8kJCT/IyMk/yMiIv8hISH/Dg4O/w4O
+ DmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABta2v/SkpK/0pKSv9JSUn/SEhI/0ZF
+ Rf9AQED/QkJC/8nJyf+rq6v/n5+e/56env+cnJz/mpqa/5eXl/+UlJT/kpKR/4+Pj/+MjIz/iIqK/4aH
+ hv+Dg4P/gICA/3x8fP94eHj/dHRz/3Fxcf9ycnL/ZWVl/05PTv8nJyf/IiIi/yMkI/8kJCT/IyMj/yMj
+ I/8jISP/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABubm3/S0tM/0tM
+ S/9LS0v/SUlJ/0ZGRv9APz//jIuM/7Ozs/+jo6P/oqKi/6CgoP+enp7/nJyc/5mamf+Xlpf/lJSU/5CR
+ kf+Ojo7/i4uL/4eHh/+Dg4P/gH+A/3x8fP94eHj/dXR0/3BwcP9vb2//cHBw/2VlZf8wMDD/IiIi/yMj
+ I/8kJCT/JCQk/yQjJP8jJCP/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AABwcG//TU1N/01NTf9MTEz/SkpK/0dHR/8/Pj//jo6O/6urq/+pqan/p6em/6WkpP+ioqL/oKCg/52e
+ nv+bm5v/mJiY/5WUlP+RkZH/jo6O/4qKi/+Hh4f/g4OD/39/f/98fHz/d3d3/3Nzc/9vb2//b29v/3Jy
+ cv8vLy//ICEg/yMjI/8lJCT/JCQk/yQkJP8kJCT/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAABxcXH/Tk5O/05OT/9NTU3/TExM/0hISP9AQED/kJCQ/7Cwr/+tra3/rKyr/6mp
+ qf+np6f/pKSl/6Giof+fn5//nJyc/5iYmP+VlZX/kZGS/46Ojv+Kior/hoaG/4KCgv9+fn7/enp7/3Z2
+ dv9xcnH/b29v/3Jycv8vLi7/ISAh/yMjI/8kJCX/JSUl/yQkJf8lJST/Dg4O/w4ODmYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAABzc3P/T09P/09PT/9PT0//TU1M/0lJSf9BQEH/kpKS/7W0
+ tP+xsbH/r6+w/66urv+rq6v/qamp/6alpf+ioqL/n5+f/5ycnP+YmZj/lJWV/5GRkf+NjY3/iYmJ/4WF
+ hf+BgYH/fX19/3l5ef90dHT/cHBw/3Jycv8uLi7/ISEg/yQkJP8lJSX/JiUm/yYlJf8lJSX/Dg4O/w4O
+ DmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAAB0dHT/UVFR/1FQUf9PT0//Tk5O/0tK
+ Sv9CQkL/lZWV/7i4uP+2tbX/s7Oz/7Gxsf+vr6//ra2t/6mqqv+mpqb/oqKj/5+fn/+cnJz/mJiY/5SU
+ lP+QkI//jIyM/4iIiP+Dg4P/f39//3t7e/93d3b/cnJy/3Jycv8uLy//ISEh/yQkJP8mJiX/JiYm/yYm
+ Jf8mJSX/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAAB1dXX/U1NU/1NT
+ U/9QUVH/T05O/0xMTP9CQkL/l5eX/76+vv+6urr/t7i3/7W1tf+ysrL/sLCw/66trf+rqqz/pqem/6Ki
+ ov+fn5//m5ub/5eWl/+SkpL/jo+O/4uKiv+Ghob/gYKB/31+fv95eXn/dHR0/3Nzc/8vLy//IyEj/yQk
+ JP8mJib/JyYn/yYmJv8mJib/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AAB2d3b/VVVV/1VVVf9TUlL/UFBQ/01NTf9ERET/mpqa/8LCwv++v7//vLy8/7m5uv+2trf/s7Oz/62t
+ rf+mpqb/oqOj/56en/+bm5r/lpeX/5OTkv+Ojo7/jY6N/42Njf+JiYj/hIOD/39/f/97e3v/dnd2/3V1
+ dP8vLy//ISEh/yQlJf8mJib/Jycn/ycmJv8mJyb/Dg4O/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAAB4d3j/VlZW/1ZWVv9UVFT/UVFR/05OTv9FRET/nJyc/8bGxv/CwsP/wMDA/72+
+ vf+6u7r/t7e3/7CwsP+pqan/pqam/6Khov+dnZ3/mZmZ/5WVlf+UlJT/k5OT/4+Pj/+Li4v/hoaG/4GB
+ gf99fX3/eHh4/3Z3dv8vLy//ISIj/yUlJf8nJyb/KCco/ygnJ/8nJyf/Dg4O/w4ODmYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAAB5eXn/WFhY/1dXV/9WVlb/UlNT/09PT/9GRkb/n5+f/8rL
+ yv/Gxsb/w8TE/8HBwf+9vb7/urq6/7Ozs/+srKz/qKio/6SlpP+goKD/m5ub/5eXl/+Tk5P/kpKS/5CR
+ kP+NjY3/iIiI/4ODg/9+f3//enp7/3h4eP8wMC//IiIi/yYmJf8nJyf/KCgo/ycnJ/8oJyf/Dg4O/w4O
+ DmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAAB6e3v/WVla/1lZWf9XV1f/VFRV/09Q
+ T/9GRkb/oqGi/8/Pz//Ky8r/x8jH/8TExP/BwcH/vr2+/7a2tv+vr6//qqur/6enp/+ioqL/np6e/5mZ
+ mf+VlZX/lJSU/5OSkv+Ojo7/ioqK/4WFhf+AgID/fHx8/3h5ev8wMDD/IyIj/yYmJv8oJyj/KCgq/ygo
+ KP8nKCj/Dw8P/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAAB8fHz/W1ta/1pa
+ Wv9YWFj/VVZW/1BQUP9HR0f/pKSk/9LS0v/Ozs7/y8vL/8fHx//DxMT/wMDA/7m5uf+ysrH/ra2t/6mo
+ qP+lpaX/oKCg/5ubm/+Xlpf/mZma/5SUlP+QkI//i4uL/4aGhv+BgYH/fX19/3t7e/8wMDD/IyMj/yYm
+ Jv8oKCf/KSko/ykoKP8oKCj/EBAQ/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AAB+fn3/XFxc/1xbXP9aWVn/V1dW/1FRUf9ISEj/paWl/9bW1v/R0dH/zs7O/8vKyv/Gxsb/w8LC/7i4
+ t/+srKz/p6mn/6Ojov+enp7/oqKi/6Wlpf+fn5//m5qb/5WWlv+RkZD/jY2M/4iIh/+CgoL/fn5+/3x8
+ fP8xMjL/IyMj/yYnJ/8oKCj/KSkp/ygoKf8oKSj/ERER/w4ODmYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAAB/f3//XV1d/11dXf9aWlv/WFhX/1JSUv9JSUn/pKSk/9ra2v/U1NT/0NDQ/83N
+ zf/Iycn/xMTE/729vf+1tbb/sbGx/6ysrP+oqKj/oqKk/52dnv+YmJj/mJiY/5eXl/+SkpL/jo6N/4iJ
+ iP+Dg4P/f39//319ff80NDT/IyMj/ycnJ/8oKCj/KSkp/ykpKf8oKCj/ExMT/w4ODmYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACAgID/Xl5e/15eXv9cXFz/WVlZ/1NTU/9JSUn/pKSk/93d
+ 3f/X19b/0tLS/8/Pz//Ly8v/xsbG/8LCwv+9vr7/uLi5/7S0tP+wsLD/rKys/6enpv+hoaH/nZ2d/5iY
+ mP+Sk5P/jo6O/4mJif+EhIT/f4CA/35+fv82Njb/JCMk/ycnJ/8oKCj/KSkp/ykpKf8pKSn/FhYW/w0N
+ DWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACCgoL/X19e/15eXv9dXF3/WVpZ/1RU
+ VP9KSUr/paWl/+Hh4P/Z2tr/1dXU/9DQ0P/NzM3/x8fH/8PDw/+/vr7/urq6/7W1tf+wsLD/rK2t/6en
+ p/+ioqL/np2d/5mZmP+UlJP/j4+P/4qKiv+FhYX/gICA/319ff85OTn/IyMk/ycnJ/8oKCn/KSkp/ykp
+ Kf8pKSf/GBcY/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACDhIT/YGBg/19f
+ X/9eXV3/Wlpa/1VVVf9LSkv/paWl/+Hi4v/b29v/1tbV/9HR0f/Nzc3/yMjI/8PDxP+/v7//uru6/7W1
+ tf+xsbH/ra2t/6ioqP+io6P/np6e/5mZmf+UlJT/j4+P/4uKiv+FhYX/gICA/35+ff88PDz/JCQk/ycn
+ J/8pKSn/Kiop/ykpKf8oJyj/GRka/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AACEhIT/YGBg/19fX/9eXl7/Wlpb/1ZWVv9LS0v/paWl/+Li4v/c3Nz/1tfW/9HS0f/Nzs7/ycjJ/8TE
+ xP+/wMD/u7q7/7a1tv+xsbH/ra2t/6iop/+jo6L/np6e/5mZmf+UlJT/j4+Q/4uKiv+GhYX/gICA/35+
+ fv8/QED/JSUl/ygoJ/8pKSn/Kiop/ykpKf8oKCj/Gxsb/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAACFh4f/YGBg/19fX/9eXl7/Wlpb/1ZWV/9MTEz/pqam/+Hi4f/b29v/1tbW/9HR
+ 0f/Nzc3/yMjJ/8TExP+/v7//u7u7/7W2tf+xsbH/ra2t/6ioqP+jo6P/np6e/5mZmf+UlJT/j4+P/4qK
+ iv+FhYX/gICA/31+ff9CQkL/JiYm/ygoKP8pKSn/Kioq/ykpKf8oKCj/HBwc/w0NDWYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACIiIj/YGBg/19fX/9eXl7/W1tb/1hXV/9OTk3/p6en/+Hh
+ 4f/a2dr/1dXV/9DQ0P/Nzc3/yMjH/8PDw/++v7//urq6/7W1tf+wsbD/rK2t/6eop/+ioqL/np6e/5mZ
+ mf+TlJT/j4+P/4qKiv+FhIX/gICA/359ff9GRkb/Jicm/yopKv8qKyr/Kisq/ykpKf8oKCj/HR4e/w0N
+ DWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACJiYn/YGBg/19fX/9eXl7/W1tb/1hY
+ WP9QUFD/qamp/+jo6P/W1tb/0tPT/8/Pz//Ly8v/xsbG/8LCwv++vr7/ubm5/7S0tP+wsLD/rKyr/6en
+ pv+hoqL/nZ2d/5iYmP+Tk5P/jo+O/4mJif+EhIT/f3+A/3t7e/9KSkv/KCgo/ysrK/8sLCz/Kyoq/yop
+ Kv8pJyf/Hx8f/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACLi4v/X19e/15e
+ X/9dXV3/W1tb/1lYWP9UVFT/V1dY///////j4+P/09PT/8/Pz//Kysr/xcfH/8HBwv+/vr//ubm5/7W1
+ tf+wsLD/rK2s/6amqP+ioqL/np2e/5mZmf+Uk5T/kJCQ/4uLi/+Ghob/gYGB/3x8fP8xMC//Kyos/yws
+ LP8tLCz/Kyoq/xeBlv8oJif/IiIi/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AACMjIz/Xl1d/15eXv9dXFz/W1tb/1hZWf9WVlX/Tk5O/1ZXVv+np6f/paWl/6SkpP+ioqL/oKCg/5yc
+ nP+YmJj/k5OT/46Pj/+JiYn/hYSF/4CAgP97e3z/dnZ2/3Fycf9tbW3/Z2Zm/2JiYv9dXV3/Wlpa/zMz
+ M/8sLSz/Li4t/y0tLf8tLS3/LCop/yknJv8nJiT/JCQk/w0NDWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAA
+ AAAAAAAAAAAAAAAAAACOjo7/XF5c/15eXv9bW1z/Wlpa/1hYWP9WVlf/UlNT/05PT/9LS0r/R0dH/0RE
+ RP9CQkL/QEBA/z4/P/88PD3/Ozs7/zs7PP86Ojr/OTk5/zg4OP82Njb/NTQ1/zQzNP8zMzP/MTEx/zAw
+ MP8vLy//Ly8v/y4uLv8vLy//Li8u/y4tLf8tLSz/Kyoo/xeBlv8oJif/JiYm/w0NDWYODg5ZDQ0NMwcH
+ Bw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACQj5D/XVtb/11dXP9bW1v/WVlZ/1hYWP9WVlb/U1RT/1JS
+ Uf9PT0//Tk5N/0tMS/9KSkr/SEhI/0dGR/9FREX/QkJD/0FBQv9AQED/Pz8//z4+Pv89PT3/Ozs7/zk5
+ Ov84ODj/NjY3/zU1Nf8zMzP/MjIy/zExMf8vMC//Ly8v/y8tLf8XgJX/LCgn/yknJv8pJiX/Jycn/w0N
+ DWYODg5ZDQ0NMwcHBw4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACSkpL/Wlpa/1tbW/9aWlr/WVlY/1dX
+ V/9WVVb/VFRU/1JSUf9QT1D/Tk5O/01NTf9MTEz/SkpK/0hJSP9HR0f/RkZG/0RERP9CQkL/QEBA/z8/
+ P/8+Pj7/PT09/zs7O/85OTn/ODg4/zc3Nv80NDT/MzMz/zIyMv8wMDD/Ly8v/y8sLP8uKiv/LSgn/xiO
+ qv8oJyb/KSgp/w0NDWQODg5XDQ0NMggICA4AAAABAAAAAAAAAAAAAAAAAAAAAAAAAACTk5P/WVhY/1pa
+ Wv9ZWVn/WFhY/1dXVv9VVVT/U1NT/1FRUf9QT1D/T09P/01OTv9MTEz/S0pL/0lJSf9ISEj/RkZG/0RE
+ RP9DQkL/QUFB/0A/P/8+Pz7/PT0+/zs8PP86Ojr/OTk5/zc4N/81NTT/MzMz/zEyMv8wMDD/Ly8v/y4t
+ Lf8XgJX/LSco/ysmJv8oJCX/Kysr/w0NDVcNDQ1MDQ0NLAkJCQwAAAABAAAAAAAAAAAAAAAAAAAAAAAA
+ AACTk5P/V1dX/1lYWP9YWFf/V1dX/1ZWVv9VVVX/UlJS/1BRUf9PT0//Tk5O/01NTf9MTEz/S0pK/0lJ
+ Sf9HR0f/RkZG/0RFRP9CQkL/QUFA/z8/P/8/Pz7/PT09/zs8PP86Ojr/ODg4/zc3Nv80NDX/MzMz/zEy
+ Mv8wMC//Ly8v/y4tLf8tLCz/Kyko/xiOqv8nJSX/LS0t/wwMDDINDQ0sCwsLGggICAcAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAACSkpL/VFVV/1VVVf9UVVX/U1NT/1JSUv9RUVH/T09P/05OTv9NTU3/TExM/0pL
+ S/9LSUn/SUlJ/0hISP9GRkf/RUVF/0NDQ/9BQUH/QD8//z4+Pv89Pj3/PDw8/zo6Ov85OTn/ODg4/zY2
+ Nv8zNDP/MjIx/zAwMP8vLy//Li4u/y0tLf8tLS3/Kykp/ykmJv8nJST/Ly8v/wcHBw4JCQkMCAgIBwAA
+ AAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACWlZX/k5KS/5KSkv+PkI//jY2N/4mJif+Hh4b/hYWF/4KC
+ g/9/gH//fXx8/3p5ef92dnb/dHR0/3Jycv9wcG//a2tr/2hoaP9lZmX/Y2Rj/2FhYf9eXl//XFxc/1hY
+ WP9VVFX/U1JS/1BQUP9NTU3/S0tL/0hISP9DREP/QUFB/z8/P/88PTz/OTk5/zY2Nv8yMjL/MTEx/wAA
+ AAEAAAABAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+ AAAAAAAAAAAAAAAAAAAAAAAA////////AAD///////8AAP///////wAA////////AAD///////8AAPgA
+ AAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAf
+ AAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgA
+ AAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAf
+ AAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgA
+ AAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAfAAD4AAAAAB8AAPgAAAAAHwAA+AAAAAAf
+ AAD///////8AAP///////wAA////////AAD///////8AAP///////wAA
+</value>
+ </data>
+</root>
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/PlotPanel.Designer.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/PlotPanel.Designer.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,79 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+namespace OpenHardwareMonitor.GUI {
+ partial class PlotPanel {
+ /// <summary>
+ /// Required designer variable.
+ /// </summary>
+ private System.ComponentModel.IContainer components = null;
+
+ /// <summary>
+ /// Clean up any resources being used.
+ /// </summary>
+ /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+ protected override void Dispose(bool disposing) {
+ if (disposing && (components != null)) {
+ components.Dispose();
+ }
+ base.Dispose(disposing);
+ }
+
+ #region Component Designer generated code
+
+ /// <summary>
+ /// Required method for Designer support - do not modify
+ /// the contents of this method with the code editor.
+ /// </summary>
+ private void InitializeComponent() {
+ this.SuspendLayout();
+ //
+ // PlotPanel
+ //
+ this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 15F);
+ this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+ this.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
+ this.Font = new System.Drawing.Font("Segoe UI", 9F);
+ this.Name = "PlotPanel";
+ this.Size = new System.Drawing.Size(170, 168);
+ this.ResumeLayout(false);
+
+ }
+
+ #endregion
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/PlotPanel.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/PlotPanel.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,258 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Drawing;
+using System.Drawing.Drawing2D;
+using System.Windows.Forms;
+using OpenHardwareMonitor.Hardware;
+
+namespace OpenHardwareMonitor.GUI {
+ public partial class PlotPanel : UserControl {
+
+ private DateTime now;
+ private List<ISensor> clocks = new List<ISensor>();
+ private List<ISensor> temperatures = new List<ISensor>();
+ private List<ISensor> fans = new List<ISensor>();
+ private IDictionary<ISensor, Color> colors;
+
+ private StringFormat centerlower;
+ private StringFormat centerleft;
+ private StringFormat lowerleft;
+ private Brush lightBrush;
+ private Pen lightPen;
+
+ public PlotPanel() {
+ this.SetStyle(ControlStyles.DoubleBuffer |
+ ControlStyles.UserPaint |
+ ControlStyles.AllPaintingInWmPaint |
+ ControlStyles.ResizeRedraw, true);
+ this.UpdateStyles();
+
+ InitializeComponent();
+
+ centerlower = new StringFormat();
+ centerlower.Alignment = StringAlignment.Center;
+ centerlower.LineAlignment = StringAlignment.Near;
+
+ centerleft = new StringFormat();
+ centerleft.Alignment = StringAlignment.Far;
+ centerleft.LineAlignment = StringAlignment.Center;
+
+ lowerleft = new StringFormat();
+ lowerleft.Alignment = StringAlignment.Far;
+ lowerleft.LineAlignment = StringAlignment.Near;
+
+ lightBrush = new SolidBrush(Color.FromArgb(245, 245, 245));
+ lightPen = new Pen(Color.FromArgb(200, 200, 200));
+ }
+
+ private List<float> GetTemperatureGrid() {
+
+ float? minTempNullable = null;
+ float? maxTempNullable = null;
+ foreach (ISensor sensor in temperatures) {
+ IEnumerable<ISensorEntry> graph = sensor.Plot;
+ foreach (ISensorEntry entry in graph) {
+ if (!minTempNullable.HasValue || minTempNullable > entry.Value)
+ minTempNullable = entry.Value;
+ if (!maxTempNullable.HasValue || maxTempNullable < entry.Value)
+ maxTempNullable = entry.Value;
+ }
+ }
+ if (!minTempNullable.HasValue) {
+ minTempNullable = 20;
+ maxTempNullable = 30;
+ }
+
+ float maxTemp = (float)Math.Ceiling(maxTempNullable.Value / 10) * 10;
+ float minTemp = (float)Math.Floor(minTempNullable.Value / 10) * 10;
+ if (maxTemp == minTemp)
+ maxTemp += 10;
+
+ int countTempMax = 4;
+ float deltaTemp = maxTemp - minTemp;
+ int countTemp = (int)Math.Round(deltaTemp / 2);
+ if (countTemp > countTempMax)
+ countTemp = (int)Math.Round(deltaTemp / 5);
+ if (countTemp > countTempMax)
+ countTemp = (int)Math.Round(deltaTemp / 10);
+ if (countTemp > countTempMax)
+ countTemp = (int)Math.Round(deltaTemp / 20);
+
+ List<float> grid = new List<float>(countTemp + 1);
+ for (int i = 0; i <= countTemp; i++) {
+ grid.Add(minTemp + i * deltaTemp / countTemp);
+ }
+ return grid;
+ }
+
+ private List<float> GetTimeGrid() {
+
+ float maxTime = 5;
+ if (temperatures.Count > 0) {
+ IEnumerator<ISensorEntry> enumerator =
+ temperatures[0].Plot.GetEnumerator();
+ if (enumerator.MoveNext()) {
+ maxTime = (float)(now - enumerator.Current.Time).TotalMinutes;
+ }
+ }
+
+ int countTime = 10;
+ float deltaTime = 5;
+ while (deltaTime + 1 < maxTime && deltaTime < 10)
+ deltaTime += 1;
+ while (deltaTime + 2 < maxTime && deltaTime < 30)
+ deltaTime += 2;
+ while (deltaTime + 5 < maxTime && deltaTime < 100)
+ deltaTime += 5;
+
+ List<float> grid = new List<float>(countTime + 1);
+ for (int i = 0; i <= countTime; i++) {
+ grid.Add(i * deltaTime / countTime);
+ }
+ return grid;
+ }
+
+ protected override void OnPaint(PaintEventArgs e) {
+
+ now = DateTime.Now - new TimeSpan(0, 0, 4);
+
+ List<float> timeGrid = GetTimeGrid();
+ List<float> tempGrid = GetTemperatureGrid();
+
+ Graphics g = e.Graphics;
+
+ RectangleF r =
+ new RectangleF(0, 0, Bounds.Width, Bounds.Height);
+
+ float ml = 40;
+ float mr = 15;
+ float x0 = r.X + ml;
+ float w = r.Width - ml - mr;
+
+ float mt = 15;
+ float mb = 28;
+ float y0 = r.Y + mt;
+ float h = r.Height - mt - mb;
+
+ float leftScaleSpace = 5;
+ float bottomScaleSpace = 5;
+
+ g.Clear(Color.White);
+
+ if (w > 0 && h > 0) {
+ g.FillRectangle(lightBrush, x0, y0, w, h);
+
+ g.SmoothingMode = SmoothingMode.HighQuality;
+ for (int i = 0; i < timeGrid.Count; i++) {
+ float x = x0 + i * w / (timeGrid.Count - 1);
+ g.DrawLine(lightPen, x, y0, x, y0 + h);
+ }
+
+ for (int i = 0; i < tempGrid.Count; i++) {
+ float y = y0 + i * h / (tempGrid.Count - 1);
+ g.DrawLine(lightPen, x0, y, x0 + w, y);
+ }
+
+ float deltaTemp = tempGrid[tempGrid.Count - 1] - tempGrid[0];
+ float deltaTime = timeGrid[timeGrid.Count - 1];
+ foreach (ISensor sensor in temperatures) {
+ using (Pen pen = new Pen(colors[sensor])) {
+ IEnumerable<ISensorEntry> graph = sensor.Plot;
+ PointF last = new PointF();
+ bool first = true;
+ foreach (ISensorEntry entry in graph) {
+ PointF point = new PointF(
+ x0 + w - w * (float)(now - entry.Time).TotalMinutes / deltaTime,
+ y0 + h - h * (entry.Value - tempGrid[0]) / deltaTemp);
+ if (!first)
+ g.DrawLine(pen, last, point);
+ last = point;
+ first = false;
+ }
+ }
+ }
+
+ g.SmoothingMode = SmoothingMode.None;
+ g.FillRectangle(Brushes.White, 0, 0, x0, r.Height);
+ g.FillRectangle(Brushes.White, x0 + w + 1, 0, r.Width - x0 - w,
+ r.Height);
+
+ for (int i = 1; i < timeGrid.Count; i++) {
+ float x = x0 + (timeGrid.Count - 1 - i) * w / (timeGrid.Count - 1);
+ g.DrawString(timeGrid[i].ToString(), Font, Brushes.Black, x,
+ y0 + h + bottomScaleSpace, centerlower);
+ }
+
+ for (int i = 0; i < tempGrid.Count - 1; i++) {
+ float y = y0 + (tempGrid.Count - 1 - i) * h / (tempGrid.Count - 1);
+ g.DrawString(tempGrid[i].ToString(), Font, Brushes.Black,
+ x0 - leftScaleSpace, y, centerleft);
+ }
+
+ g.SmoothingMode = SmoothingMode.HighQuality;
+ g.DrawString("[°C]", Font, Brushes.Black, x0 - leftScaleSpace, y0,
+ lowerleft);
+ g.DrawString("[min]", Font, Brushes.Black, x0 + w,
+ y0 + h + bottomScaleSpace, lowerleft);
+ }
+ }
+
+ public void SetSensors(List<ISensor> sensors,
+ IDictionary<ISensor, Color> colors)
+ {
+ this.colors = colors;
+ List<ISensor> clocks = new List<ISensor>();
+ List<ISensor> temperatures = new List<ISensor>();
+ List<ISensor> fans = new List<ISensor>();
+ foreach (ISensor sensor in sensors)
+ switch (sensor.SensorType) {
+ case SensorType.Clock: clocks.Add(sensor); break;
+ case SensorType.Temperature: temperatures.Add(sensor); break;
+ case SensorType.Fan: fans.Add(sensor); break;
+ }
+ this.clocks = clocks;
+ this.temperatures = temperatures;
+ this.fans = fans;
+ Invalidate();
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/PlotPanel.resources
Binary file GUI/PlotPanel.resources has changed
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/PlotPanel.resx
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/PlotPanel.resx Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+ <!--
+ Microsoft ResX Schema
+
+ Version 2.0
+
+ The primary goals of this format is to allow a simple XML format
+ that is mostly human readable. The generation and parsing of the
+ various data types are done through the TypeConverter classes
+ associated with the data types.
+
+ Example:
+
+ ... ado.net/XML headers & schema ...
+ <resheader name="resmimetype">text/microsoft-resx</resheader>
+ <resheader name="version">2.0</resheader>
+ <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+ <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+ <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+ <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+ <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+ <value>[base64 mime encoded serialized .NET Framework object]</value>
+ </data>
+ <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+ <comment>This is a comment</comment>
+ </data>
+
+ There are any number of "resheader" rows that contain simple
+ name/value pairs.
+
+ Each data row contains a name, and value. The row also contains a
+ type or mimetype. Type corresponds to a .NET class that support
+ text/value conversion through the TypeConverter architecture.
+ Classes that don't support this are serialized and stored with the
+ mimetype set.
+
+ The mimetype is used for serialized objects, and tells the
+ ResXResourceReader how to depersist the object. This is currently not
+ extensible. For a given mimetype the value must be set accordingly:
+
+ Note - application/x-microsoft.net.object.binary.base64 is the format
+ that the ResXResourceWriter will generate, however the reader can
+ read any of the formats listed below.
+
+ mimetype: application/x-microsoft.net.object.binary.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.soap.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.bytearray.base64
+ value : The object must be serialized into a byte array
+ : using a System.ComponentModel.TypeConverter
+ : and then encoded with base64 encoding.
+ -->
+ <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+ <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+ <xsd:element name="root" msdata:IsDataSet="true">
+ <xsd:complexType>
+ <xsd:choice maxOccurs="unbounded">
+ <xsd:element name="metadata">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" />
+ </xsd:sequence>
+ <xsd:attribute name="name" use="required" type="xsd:string" />
+ <xsd:attribute name="type" type="xsd:string" />
+ <xsd:attribute name="mimetype" type="xsd:string" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="assembly">
+ <xsd:complexType>
+ <xsd:attribute name="alias" type="xsd:string" />
+ <xsd:attribute name="name" type="xsd:string" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="data">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+ <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+ <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+ <xsd:attribute ref="xml:space" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="resheader">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" />
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:choice>
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:schema>
+ <resheader name="resmimetype">
+ <value>text/microsoft-resx</value>
+ </resheader>
+ <resheader name="version">
+ <value>2.0</value>
+ </resheader>
+ <resheader name="reader">
+ <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <resheader name="writer">
+ <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+</root>
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/SensorNode.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/SensorNode.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,121 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using Aga.Controls.Tree;
+using OpenHardwareMonitor.Hardware;
+
+namespace OpenHardwareMonitor.GUI {
+ public class SensorNode : Node {
+
+ private ISensor sensor;
+ private string format;
+ private bool plot = false;
+
+ public string ValueToString(float? value) {
+ if (value.HasValue)
+ return string.Format(format, value);
+ else
+ return "-";
+ }
+
+ public SensorNode(ISensor sensor) {
+ this.sensor = sensor;
+ switch (sensor.SensorType) {
+ case SensorType.Voltage: format = "{0:F2} V"; break;
+ case SensorType.Clock: format = "{0:F0} MHz"; break;
+ case SensorType.Temperature: format = "{0:F1} °C"; break;
+ case SensorType.Fan: format = "{0:F0} RPM"; break;
+ }
+ }
+
+ public override string Text {
+ get { return sensor.Name; }
+ set { sensor.Name = value; }
+ }
+
+ public bool Plot {
+ get { return plot; }
+ set { plot = value; }
+ }
+
+ public ISensor Sensor {
+ get { return sensor; }
+ }
+
+ public string Value {
+ get { return ValueToString(sensor.Value); }
+ }
+
+ public string Min {
+ get { return ValueToString(sensor.Min); }
+ }
+
+ public string Max {
+ get { return ValueToString(sensor.Max); }
+ }
+
+ public String Limit {
+ get {
+ return sensor.Limit.ToString();
+ }
+ set {
+ if (value != "")
+ sensor.Limit = float.Parse(value);
+ else
+ sensor.Limit = null;
+ }
+ }
+
+ public override bool Equals(System.Object obj) {
+ if (obj == null)
+ return false;
+
+ SensorNode s = obj as SensorNode;
+ if (s == null)
+ return false;
+
+ return (sensor == s.sensor);
+ }
+
+ public override int GetHashCode() {
+ return sensor.GetHashCode();
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 GUI/TypeNode.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GUI/TypeNode.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,82 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using Aga.Controls.Tree;
+using OpenHardwareMonitor.Hardware;
+
+namespace OpenHardwareMonitor.GUI {
+ public class TypeNode : Node {
+
+ private SensorType sensorType;
+ private bool visible = true;
+
+ public TypeNode(SensorType sensorType) : base() {
+ this.sensorType = sensorType;
+
+ switch (sensorType) {
+ case SensorType.Voltage:
+ this.Image = Utilities.EmbeddedResources.GetImage("voltage.png");
+ this.Text = "Voltages";
+ break;
+ case SensorType.Clock:
+ this.Image = Utilities.EmbeddedResources.GetImage("clock.png");
+ this.Text = "Clocks";
+ break;
+ case SensorType.Temperature:
+ this.Image = Utilities.EmbeddedResources.GetImage("temperature.png");
+ this.Text = "Temperatures";
+ break;
+ case SensorType.Fan:
+ this.Image = Utilities.EmbeddedResources.GetImage("fan.png");
+ this.Text = "Fans";
+ break;
+ }
+ }
+
+ public SensorType SensorType {
+ get { return sensorType; }
+ }
+
+ public bool IsVisible {
+ get { return visible; }
+ set { visible = value; }
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/ATI/ADL.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/ATI/ADL.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,251 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+
+namespace OpenHardwareMonitor.Hardware.ATI {
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct ADLAdapterInfo {
+ public int Size;
+ public int AdapterIndex;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string UDID;
+ public int BusNumber;
+ public int DriverNumber;
+ public int FunctionNumber;
+ public int VendorID;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string AdapterName;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string DisplayName;
+ public int Present;
+ public int Exist;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string DriverPath;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string DriverPathExt;
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = ADL.ADL_MAX_PATH)]
+ public string PNPString;
+ public int OSDisplayIndex;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct ADLPMActivity {
+ public int Size;
+ public int EngineClock;
+ public int MemoryClock;
+ public int Vddc;
+ public int ActivityPercent;
+ public int CurrentPerformanceLevel;
+ public int CurrentBusSpeed;
+ public int CurrentBusLanes;
+ public int MaximumBusLanes;
+ public int Reserved;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct ADLTemperature {
+ public int Size;
+ public int Temperature;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct ADLFanSpeedValue {
+ public int Size;
+ public int SpeedType;
+ public int FanSpeed;
+ public int Flags;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct ADLFanSpeedInfo {
+ public int Size;
+ public int Flags;
+ public int MinPercent;
+ public int MaxPercent;
+ public int MinRPM;
+ public int MaxRPM;
+ }
+
+ public class ADL {
+ public const int ADL_MAX_PATH = 256;
+ public const int ADL_MAX_ADAPTERS = 40;
+ public const int ADL_MAX_DISPLAYS = 40;
+ public const int ADL_MAX_DEVICENAME = 32;
+ public const int ADL_SUCCESS = 0;
+ public const int ADL_FAIL = -1;
+ public const int ADL_DRIVER_OK = 0;
+ public const int ADL_MAX_GLSYNC_PORTS = 8;
+ public const int ADL_MAX_GLSYNC_PORT_LEDS = 8;
+ public const int ADL_MAX_NUM_DISPLAYMODES = 1024;
+
+ public const int ADL_DL_FANCTRL_SPEED_TYPE_PERCENT = 1;
+ public const int ADL_DL_FANCTRL_SPEED_TYPE_RPM = 2;
+
+ public const int ADL_DL_FANCTRL_SUPPORTS_PERCENT_READ = 1;
+ public const int ADL_DL_FANCTRL_SUPPORTS_PERCENT_WRITE = 2;
+ public const int ADL_DL_FANCTRL_SUPPORTS_RPM_READ = 4;
+ public const int ADL_DL_FANCTRL_SUPPORTS_RPM_WRITE = 8;
+
+ private delegate int ADL_Main_Control_CreateDelegate(
+ ADL_Main_Memory_AllocDelegate callback, int enumConnectedAdapters);
+ private delegate int ADL_Adapter_AdapterInfo_GetDelegate(IntPtr info,
+ int size);
+
+ public delegate int ADL_Main_Control_DestroyDelegate();
+ public delegate int ADL_Adapter_NumberOfAdapters_GetDelegate(
+ ref int numAdapters);
+ public delegate int ADL_Adapter_ID_GetDelegate(int adapterIndex,
+ out int adapterID);
+ public delegate int ADL_Adapter_Active_GetDelegate(int adapterIndex,
+ out int status);
+ public delegate int ADL_Overdrive5_CurrentActivity_GetDelegate(
+ int iAdapterIndex, ref ADLPMActivity activity);
+ public delegate int ADL_Overdrive5_Temperature_GetDelegate(int adapterIndex,
+ int thermalControllerIndex, ref ADLTemperature temperature);
+ public delegate int ADL_Overdrive5_FanSpeed_GetDelegate(int adapterIndex,
+ int thermalControllerIndex, ref ADLFanSpeedValue fanSpeedValue);
+ public delegate int ADL_Overdrive5_FanSpeedInfo_GetDelegate(
+ int adapterIndex, int thermalControllerIndex,
+ ref ADLFanSpeedInfo fanSpeedInfo);
+
+ private static ADL_Main_Control_CreateDelegate
+ _ADL_Main_Control_Create;
+ private static ADL_Adapter_AdapterInfo_GetDelegate
+ _ADL_Adapter_AdapterInfo_Get;
+
+ public static ADL_Main_Control_DestroyDelegate
+ ADL_Main_Control_Destroy;
+ public static ADL_Adapter_NumberOfAdapters_GetDelegate
+ ADL_Adapter_NumberOfAdapters_Get;
+ public static ADL_Adapter_ID_GetDelegate
+ ADL_Adapter_ID_Get;
+ public static ADL_Adapter_Active_GetDelegate
+ ADL_Adapter_Active_Get;
+ public static ADL_Overdrive5_CurrentActivity_GetDelegate
+ ADL_Overdrive5_CurrentActivity_Get;
+ public static ADL_Overdrive5_Temperature_GetDelegate
+ ADL_Overdrive5_Temperature_Get;
+ public static ADL_Overdrive5_FanSpeed_GetDelegate
+ ADL_Overdrive5_FanSpeed_Get;
+ public static ADL_Overdrive5_FanSpeedInfo_GetDelegate
+ ADL_Overdrive5_FanSpeedInfo_Get;
+
+ private static string GetDllName() {
+ int p = (int)System.Environment.OSVersion.Platform;
+ if ((p == 4) || (p == 128)) {
+ if (IntPtr.Size == 4) {
+ return "atiadlxy.so";
+ } else {
+ return "atiadlxx.so";
+ }
+ } else {
+ if (IntPtr.Size == 4) {
+ return "atiadlxy.dll";
+ } else {
+ return "atiadlxx.dll";
+ }
+ }
+ }
+
+ private static void GetDelegate<T>(string entryPoint, out T newDelegate)
+ where T : class
+ {
+ DllImportAttribute attribute = new DllImportAttribute(GetDllName());
+ attribute.CallingConvention = CallingConvention.StdCall;
+ attribute.PreserveSig = true;
+ attribute.EntryPoint = entryPoint;
+ PInvokeDelegateFactory.CreateDelegate(attribute, out newDelegate);
+ }
+
+ static ADL() {
+ GetDelegate("ADL_Main_Control_Create",
+ out _ADL_Main_Control_Create);
+ GetDelegate("ADL_Adapter_AdapterInfo_Get",
+ out _ADL_Adapter_AdapterInfo_Get);
+ GetDelegate("ADL_Main_Control_Destroy",
+ out ADL_Main_Control_Destroy);
+ GetDelegate("ADL_Adapter_NumberOfAdapters_Get",
+ out ADL_Adapter_NumberOfAdapters_Get);
+ GetDelegate("ADL_Adapter_ID_Get",
+ out ADL_Adapter_ID_Get);
+ GetDelegate("ADL_Adapter_Active_Get",
+ out ADL_Adapter_Active_Get);
+ GetDelegate("ADL_Overdrive5_CurrentActivity_Get",
+ out ADL_Overdrive5_CurrentActivity_Get);
+ GetDelegate("ADL_Overdrive5_Temperature_Get",
+ out ADL_Overdrive5_Temperature_Get);
+ GetDelegate("ADL_Overdrive5_FanSpeed_Get",
+ out ADL_Overdrive5_FanSpeed_Get);
+ GetDelegate("ADL_Overdrive5_FanSpeedInfo_Get",
+ out ADL_Overdrive5_FanSpeedInfo_Get);
+ }
+
+ private ADL() { }
+
+ public static int ADL_Main_Control_Create(int enumConnectedAdapters) {
+ return _ADL_Main_Control_Create(Main_Memory_Alloc, enumConnectedAdapters);
+ }
+
+ public static int ADL_Adapter_AdapterInfo_Get(ADLAdapterInfo[] info) {
+ int elementSize = Marshal.SizeOf(typeof(ADLAdapterInfo));
+ int size = info.Length * elementSize;
+ IntPtr ptr = Marshal.AllocHGlobal(size);
+ int result = _ADL_Adapter_AdapterInfo_Get(ptr, size);
+ for (int i = 0; i < info.Length; i++)
+ info[i] = (ADLAdapterInfo)
+ Marshal.PtrToStructure((IntPtr)((long)ptr + i * elementSize),
+ typeof(ADLAdapterInfo));
+ Marshal.FreeHGlobal(ptr);
+ return result;
+ }
+
+ private delegate IntPtr ADL_Main_Memory_AllocDelegate(int size);
+
+ private static IntPtr Main_Memory_Alloc(int size) {
+ return Marshal.AllocHGlobal(size);;
+ }
+
+ private static void Main_Memory_Free(IntPtr buffer) {
+ if (IntPtr.Zero != buffer)
+ Marshal.FreeHGlobal(buffer);
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/ATI/ATIGPU.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/ATI/ATIGPU.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,117 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Reflection;
+
+namespace OpenHardwareMonitor.Hardware.ATI {
+ public class ATIGPU : IHardware {
+
+ private string name;
+ private Image icon;
+ private int adapterIndex;
+ private Sensor temperature;
+ private Sensor fan;
+ private Sensor coreClock;
+ private Sensor memoryClock;
+ private Sensor coreVoltage;
+
+ public ATIGPU(string name, int adapterIndex) {
+ this.name = name;
+ this.icon = Utilities.EmbeddedResources.GetImage("ati.png");
+ this.adapterIndex = adapterIndex;
+
+ ADLFanSpeedInfo speedInfo = new ADLFanSpeedInfo();
+ ADL.ADL_Overdrive5_FanSpeedInfo_Get(adapterIndex, 0, ref speedInfo);
+
+ this.temperature =
+ new Sensor("GPU Core", 0, SensorType.Temperature, this);
+ this.fan = new Sensor("GPU", 0, speedInfo.MaxRPM, SensorType.Fan, this);
+ this.coreClock = new Sensor("GPU Core", 0, SensorType.Clock, this);
+ this.memoryClock = new Sensor("GPU Memory", 1, SensorType.Clock, this);
+ this.coreVoltage = new Sensor("GPU Core", 0, SensorType.Voltage, this);
+ Update();
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/atigpu/" + adapterIndex; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get {
+ return new ISensor[] { coreVoltage, coreClock, memoryClock, temperature,
+ fan };
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Update() {
+ ADLTemperature adlt = new ADLTemperature();
+ ADL.ADL_Overdrive5_Temperature_Get(adapterIndex, 0, ref adlt);
+ temperature.Value = 0.001f * adlt.Temperature;
+
+ ADLFanSpeedValue adlf = new ADLFanSpeedValue();
+ adlf.SpeedType = ADL.ADL_DL_FANCTRL_SPEED_TYPE_RPM;
+ ADL.ADL_Overdrive5_FanSpeed_Get(adapterIndex, 0, ref adlf);
+ fan.Value = adlf.FanSpeed;
+
+ ADLPMActivity adlp = new ADLPMActivity();
+ ADL.ADL_Overdrive5_CurrentActivity_Get(adapterIndex, ref adlp);
+ coreClock.Value = 0.01f * adlp.EngineClock;
+ memoryClock.Value = 0.01f * adlp.MemoryClock;
+ coreVoltage.Value = 0.001f * adlp.Vddc;
+ }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/ATI/ATIGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/ATI/ATIGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,111 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.ATI {
+ public class ATIGroup : IGroup {
+
+ private List<ATIGPU> hardware = new List<ATIGPU>();
+ private StringBuilder report = new StringBuilder();
+
+ public ATIGroup() {
+ try {
+ if (ADL.ADL_Main_Control_Create(1) == ADL.ADL_SUCCESS) {
+ int numberOfAdapters = 0;
+ ADL.ADL_Adapter_NumberOfAdapters_Get(ref numberOfAdapters);
+
+ report.AppendLine("AMD Display Library");
+ report.AppendLine();
+ report.Append("Numer of adapters: ");
+ report.AppendLine(numberOfAdapters.ToString());
+ report.AppendLine();
+
+ if (numberOfAdapters > 0) {
+ ADLAdapterInfo[] adapterInfo = new ADLAdapterInfo[numberOfAdapters];
+ if (ADL.ADL_Adapter_AdapterInfo_Get(adapterInfo) == ADL.ADL_SUCCESS)
+ for (int i = 0; i < numberOfAdapters; i++) {
+ int isActive;
+ ADL.ADL_Adapter_Active_Get(adapterInfo[i].AdapterIndex,
+ out isActive);
+
+ report.Append("AdapterIndex: ");
+ report.AppendLine(i.ToString());
+ report.Append("isActive: ");
+ report.AppendLine(isActive.ToString());
+ report.Append("AdapterName: ");
+ report.AppendLine(adapterInfo[i].AdapterName);
+ report.Append("UDID: ");
+ report.AppendLine(adapterInfo[i].UDID);
+ report.AppendLine();
+
+ if (isActive == 1) {
+ int adapterID;
+ ADL.ADL_Adapter_ID_Get(adapterInfo[i].AdapterIndex,
+ out adapterID);
+
+ if (adapterID > 0 && adapterInfo[i].UDID != "") {
+ hardware.Add(new ATIGPU(
+ adapterInfo[i].AdapterName,
+ adapterInfo[i].AdapterIndex));
+ }
+ }
+ }
+ }
+ }
+ } catch (DllNotFoundException) { } catch (EntryPointNotFoundException) { }
+ }
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ public string GetReport() {
+ return report.ToString();
+ }
+
+ public void Close() {
+ try {
+ ADL.ADL_Main_Control_Destroy();
+ } catch (Exception) { }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/CPU/AMD10CPU.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/CPU/AMD10CPU.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,113 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.CPU {
+
+ public class AMD10CPU : IHardware {
+ private string name;
+ private Image icon;
+
+ private uint pciAddress;
+
+ private Sensor coreTemperature;
+
+ private const ushort PCI_AMD_VENDOR_ID = 0x1022;
+ private const ushort PCI_AMD_10H_MISCELLANEOUS_DEVICE_ID = 0x1203;
+ private const uint REPORTED_TEMPERATURE_CONTROL_REGISTER = 0xA4;
+
+ public AMD10CPU(string name, uint family, uint model, uint stepping,
+ uint[,] cpuidData, uint[,] cpuidExtData) {
+
+ this.name = name;
+ this.icon = Utilities.EmbeddedResources.GetImage("cpu.png");
+
+ uint coreCount = 1;
+ if (cpuidExtData.GetLength(0) > 8)
+ coreCount = (cpuidExtData[8, 2] & 0xFF) + 1;
+
+ // AMD family 10h processors support only one temperature sensor
+ coreTemperature = new Sensor("Core", 0, SensorType.Temperature, this);
+
+ pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,
+ PCI_AMD_10H_MISCELLANEOUS_DEVICE_ID, 0);
+ Update();
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/amdcpu/0"; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get {
+ return new ISensor[] { coreTemperature };
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Update() {
+ if (pciAddress == 0xFFFFFFFF)
+ return;
+
+ uint value;
+ if (WinRing0.ReadPciConfigDwordEx(pciAddress,
+ REPORTED_TEMPERATURE_CONTROL_REGISTER, out value))
+ coreTemperature.Value = ((value >> 21) & 0x7FF) / 8.0f;
+ }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/CPU/CPUGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/CPU/CPUGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,208 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.CPU {
+
+ public class CPUGroup : IGroup {
+ private List<IHardware> hardware = new List<IHardware>();
+
+ private string cpuBrandString;
+ private string cpuVendor;
+ private uint[,] cpuidData;
+ private uint[,] cpuidExtData;
+
+ private uint family;
+ private uint model;
+ private uint stepping;
+
+ private static uint CPUID = 0;
+ private static uint CPUID_EXT = 0x80000000;
+
+ public static void AppendRegister(StringBuilder b, uint value) {
+ b.Append((char)((value) & 0xff));
+ b.Append((char)((value >> 8) & 0xff));
+ b.Append((char)((value >> 16) & 0xff));
+ b.Append((char)((value >> 24) & 0xff));
+ }
+
+ public CPUGroup() {
+
+ if (!WinRing0.IsAvailable)
+ return;
+
+ if (WinRing0.IsCpuid()) {
+ uint maxCPUID = 0;
+ uint maxCPUID_EXT = 0;
+ uint eax, ebx, ecx, edx;
+
+
+ if (WinRing0.Cpuid(CPUID, out eax, out ebx, out ecx, out edx)) {
+ maxCPUID = eax;
+ StringBuilder vendorBuilder = new StringBuilder();
+ AppendRegister(vendorBuilder, ebx);
+ AppendRegister(vendorBuilder, edx);
+ AppendRegister(vendorBuilder, ecx);
+ cpuVendor = vendorBuilder.ToString();
+
+ eax = ebx = ecx = edx = 0;
+ if (WinRing0.Cpuid(CPUID_EXT, out eax, out ebx, out ecx, out edx)) {
+ maxCPUID_EXT = eax - CPUID_EXT;
+ }
+ }
+ if (maxCPUID == 0 || maxCPUID_EXT == 0)
+ return;
+
+ cpuidData = new uint[maxCPUID + 1, 4];
+ for (uint i = 0; i < (maxCPUID + 1); i++)
+ WinRing0.Cpuid(CPUID + i, out cpuidData[i, 0], out cpuidData[i, 1],
+ out cpuidData[i, 2], out cpuidData[i, 3]);
+
+ cpuidExtData = new uint[maxCPUID_EXT + 1, 4];
+ for (uint i = 0; i < (maxCPUID_EXT + 1); i++)
+ WinRing0.Cpuid(CPUID_EXT + i, out cpuidExtData[i, 0],
+ out cpuidExtData[i, 1], out cpuidExtData[i, 2],
+ out cpuidExtData[i, 3]);
+
+ StringBuilder nameBuilder = new StringBuilder();
+ for (uint i = 2; i <= 4; i++) {
+ if (WinRing0.Cpuid(CPUID_EXT + i, out eax, out ebx, out ecx, out edx))
+ {
+ AppendRegister(nameBuilder, eax);
+ AppendRegister(nameBuilder, ebx);
+ AppendRegister(nameBuilder, ecx);
+ AppendRegister(nameBuilder, edx);
+ }
+ }
+ cpuBrandString = nameBuilder.ToString();
+ nameBuilder.Replace("(R)", " ");
+ nameBuilder.Replace("(TM)", " ");
+ nameBuilder.Replace("(tm)", " ");
+ nameBuilder.Replace("CPU", "");
+ for (int i = 0; i < 10; i++) nameBuilder.Replace(" ", " ");
+ string name = nameBuilder.ToString();
+ if (name.Contains("@"))
+ name = name.Remove(name.LastIndexOf('@'));
+ name = name.Trim();
+
+ this.family = ((cpuidData[1, 0] & 0x0FF00000) >> 20) +
+ ((cpuidData[1, 0] & 0x0F00) >> 8);
+ this.model = ((cpuidData[1, 0] & 0x0F0000) >> 12) +
+ ((cpuidData[1, 0] & 0xF0) >> 4);
+ this.stepping = (cpuidData[1, 0] & 0x0F);
+
+ switch (cpuVendor) {
+ case "GenuineIntel":
+ // check if processor supports a digital thermal sensor
+ if (maxCPUID >= 6 && (cpuidData[6, 0] & 1) != 0)
+ hardware.Add(new IntelCPU(name, family, model, stepping,
+ cpuidData, cpuidExtData));
+ break;
+ case "AuthenticAMD":
+ // check if processor supports a digital thermal sensor
+ if (maxCPUID_EXT >= 7 && (cpuidExtData[7, 3] & 1) != 0) {
+ switch (family) {
+ case 0x10:
+ hardware.Add(new AMD10CPU(name, family, model, stepping,
+ cpuidData, cpuidExtData));
+ break;
+ default:
+ break;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ private void AppendCpuidData(StringBuilder r, uint[,] data, uint offset) {
+ for (int i = 0; i < data.GetLength(0); i++) {
+ r.Append(" ");
+ r.Append((i + offset).ToString("X8"));
+ for (int j = 0; j < 4; j++) {
+ r.Append(" ");
+ r.Append(data[i, j].ToString("X8"));
+ }
+ r.AppendLine();
+ }
+ }
+
+ public string GetReport() {
+ if (hardware.Count == 0)
+ return null;
+
+ StringBuilder r = new StringBuilder();
+
+ r.AppendLine("CPUID");
+ r.AppendLine();
+ r.AppendFormat("Processor Vendor: {0}{1}", cpuVendor,
+ Environment.NewLine);
+ r.AppendFormat("Processor Brand: {0}{1}", cpuBrandString,
+ Environment.NewLine);
+ r.AppendFormat("Family: 0x{0}{1}", family.ToString("X"),
+ Environment.NewLine);
+ r.AppendFormat("Model: 0x{0}{1}", model.ToString("X"),
+ Environment.NewLine);
+ r.AppendFormat("Stepping: 0x{0}{1}", stepping.ToString("X"),
+ Environment.NewLine);
+ r.AppendLine();
+
+ r.AppendLine("CPUID Return Values");
+ r.AppendLine();
+
+ r.AppendLine(" Function EAX EBX ECX EDX");
+ AppendCpuidData(r, cpuidData, CPUID);
+ AppendCpuidData(r, cpuidExtData, CPUID_EXT);
+ r.AppendLine();
+
+ return r.ToString();
+ }
+
+ public void Close() { }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/CPU/IntelCPU.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/CPU/IntelCPU.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,151 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Reflection;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.CPU {
+ public class IntelCPU : IHardware {
+
+ private string name;
+ private Image icon;
+
+ private Sensor[] coreTemperatures;
+
+ private float tjMax = 0;
+
+ private const uint IA32_THERM_STATUS_MSR = 0x019C;
+
+ public IntelCPU(string name, uint family, uint model, uint stepping,
+ uint[,] cpuidData, uint[,] cpuidExtData) {
+
+ this.name = name;
+ this.icon = Utilities.EmbeddedResources.GetImage("cpu.png");
+
+ uint coreCount = 1;
+ if (cpuidData.GetLength(0) > 4)
+ coreCount = ((cpuidData[4, 0] >> 26) & 0x3F) + 1;
+
+ switch (family) {
+ case 0x06: {
+ switch (model) {
+ case 0x0F: // Intel Core 65nm
+ switch (stepping) {
+ case 0x06: // B2
+ switch (coreCount) {
+ case 2:
+ tjMax = 80; break;
+ case 4:
+ tjMax = 90; break;
+ default:
+ tjMax = 85; break;
+ }
+ tjMax = 80; break;
+ case 0x0B: // G0
+ tjMax = 90; break;
+ case 0x0D: // M0
+ tjMax = 85; break;
+ default:
+ tjMax = 85; break;
+ } break;
+ case 0x1c: // Intel Atom
+ tjMax = 90; break;
+ case 0x17: // Intel Core 45nm
+ tjMax = 100; break;
+ default:
+ tjMax = 100; break;
+ }
+ } break;
+ default: tjMax = 100; break;
+ }
+
+ coreTemperatures = new Sensor[coreCount];
+ for (int i = 0; i < coreTemperatures.Length; i++)
+ coreTemperatures[i] =
+ new Sensor("Core #" + (i + 1), i, tjMax, SensorType.Temperature,
+ this);
+
+ Update();
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/intelcpu/0"; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get {
+ return coreTemperatures;
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Update() {
+
+ uint eax = 0, edx = 0;
+ for (int i = 0; i < coreTemperatures.Length; i++) {
+ if (WinRing0.RdmsrPx(
+ IA32_THERM_STATUS_MSR, ref eax, ref edx, (UIntPtr)(1 << i)))
+ {
+ // if reading is valid
+ if ((eax & 0x80000000) != 0) {
+ // get the dist from tjMax from bits 22:16
+ coreTemperatures[i].Value = tjMax - ((eax & 0x007F0000) >> 16);
+ }
+ }
+ }
+ }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/HDD/HDD.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/HDD/HDD.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,110 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+
+namespace OpenHardwareMonitor.Hardware.HDD {
+ public class HDD : IHardware {
+
+ private const int UPDATE_DIVIDER = 30; // update only every 30s
+
+ private string name;
+ private IntPtr handle;
+ private int drive;
+ private int attribute;
+ private Image icon;
+ private Sensor temperature;
+ private int count;
+
+
+ public HDD(string name, IntPtr handle, int drive, int attribute) {
+ this.name = name;
+ this.handle = handle;
+ this.drive = drive;
+ this.attribute = attribute;
+ this.count = 0;
+ this.icon = Utilities.EmbeddedResources.GetImage("hdd.png");
+ this.temperature = new Sensor("HDD", 0, SensorType.Temperature, this);
+ Update();
+ }
+
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/hdd/" + drive; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get {
+ return new ISensor[] { temperature };
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Update() {
+ if (count == 0) {
+ SMART.DriveAttribute[] attributes = SMART.ReadSmart(handle, drive);
+ temperature.Value = attributes[attribute].RawValue[0];
+ } else {
+ temperature.Value = temperature.Value;
+ }
+
+ count++; count %= UPDATE_DIVIDER;
+ }
+
+ public void Close() {
+ SMART.CloseHandle(handle);
+ }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/HDD/HDDGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/HDD/HDDGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,101 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+
+namespace OpenHardwareMonitor.Hardware.HDD {
+ public class HDDGroup : IGroup {
+
+ private const int MAX_DRIVES = 32;
+
+ private List<HDD> hardware = new List<HDD>();
+
+ public HDDGroup() {
+
+ int p = (int)System.Environment.OSVersion.Platform;
+ if ((p != 4) && (p != 128)) {
+ for (int drive = 0; drive < MAX_DRIVES; drive++) {
+ IntPtr handle = SMART.OpenPhysicalDrive(drive);
+
+ if (handle == SMART.INVALID_HANDLE_VALUE)
+ continue;
+
+ if (SMART.EnableSmart(handle, drive)) {
+
+ string name = SMART.ReadName(handle, drive);
+ if (name != null) {
+
+ SMART.DriveAttribute[] attributes =
+ SMART.ReadSmart(handle, drive);
+
+ int attribute = -1;
+ for (int i = 0; i < attributes.Length; i++) {
+ if (attributes[i].ID == SMART.AttributeID.Temperature) {
+ attribute = i;
+ break;
+ }
+ }
+
+ if (attribute >= 0) {
+ hardware.Add(new HDD(name, handle, drive, attribute));
+ continue;
+ }
+ }
+ }
+ SMART.CloseHandle(handle);
+ }
+ }
+ }
+
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Close() {
+ foreach (HDD hdd in hardware)
+ hdd.Close();
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/HDD/SMART.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/HDD/SMART.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,337 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+
+namespace OpenHardwareMonitor.Hardware.HDD {
+
+ public class SMART {
+
+ [Flags]
+ public enum Status : ushort {
+ PreFailureWarranty = 0x01,
+ OnLineCollection = 0x02,
+ Performance = 0x04,
+ ErrorRate = 0x08,
+ EventCount = 0x10,
+ SelfPreserving = 0x20
+ }
+
+ public enum AttributeID : byte {
+ ReadErrorRate = 0x01,
+ ThroughputPerformance = 0x02,
+ SpinUpTime = 0x03,
+ StartStopCount = 0x04,
+ ReallocatedSectorsCount = 0x05,
+ ReadChannelMargin = 0x06,
+ SeekErrorRate = 0x07,
+ SeekTimePerformance = 0x08,
+ PowerOnHours = 0x09,
+ SpinRetryCount = 0x0A,
+ RecalibrationRetries = 0x0B,
+ PowerCycleCount = 0x0C,
+ SoftReadErrorRate = 0x0D,
+ Temperature = 0xC2,
+ HardwareECCRecovered = 0xC3,
+ ReallocationEventCount = 0xC4,
+ CurrentPendingSectorCount = 0xC5,
+ UncorrectableSectorCount = 0xC6,
+ UltraDMACRCErrorCount = 0xC7,
+ WriteErrorRate = 0xC8
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ public struct DriveAttribute {
+ public AttributeID ID;
+ public Status StatusFlags;
+ public byte AttrValue;
+ public byte WorstValue;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
+ public byte[] RawValue;
+ public byte Reserved;
+ };
+
+ [Flags]
+ private enum AccessMode : uint {
+ Read = 0x80000000,
+ Write = 0x40000000,
+ Execute = 0x20000000,
+ All = 0x10000000
+ }
+
+ [Flags]
+ private enum ShareMode : uint {
+ None = 0,
+ Read = 1,
+ Write = 2,
+ Delete = 4
+ }
+
+ private enum CreationMode : uint {
+ New = 1,
+ CreateAlways = 2,
+ OpenExisting = 3,
+ OpenAlways = 4,
+ TruncateExisting = 5
+ }
+
+ [Flags]
+ private enum FileAttribute : uint {
+ Readonly = 0x00000001,
+ Hidden = 0x00000002,
+ System = 0x00000004,
+ Directory = 0x00000010,
+ Archive = 0x00000020,
+ Device = 0x00000040,
+ Normal = 0x00000080,
+ Temporary = 0x00000100,
+ SparseFile = 0x00000200,
+ ReparsePoint = 0x00000400,
+ Compressed = 0x00000800,
+ Offline = 0x00001000,
+ NotContentIndexed = 0x00002000,
+ Encrypted = 0x00004000,
+ }
+
+ private enum DriveCommand : uint {
+ GetVersion = 0x00074080,
+ SendDriveCommand = 0x0007c084,
+ ReceiveDriveData = 0x0007c088
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct CommandBlockRegisters {
+ public byte Features;
+ public byte SectorCount;
+ public byte LBALow;
+ public byte LBAMid;
+ public byte LBAHigh;
+ public byte Device;
+ public byte Command;
+ public byte Reserved;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct DriveCommandParameter {
+ private uint BufferSize;
+ public CommandBlockRegisters Registers;
+ public byte DriveNumber;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 19)]
+ public byte[] Reserved;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct DriverStatus {
+ public byte DriverError;
+ public byte IDEError;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
+ public byte[] Reserved;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct DriveCommandResult {
+ public uint BufferSize;
+ public DriverStatus DriverStatus;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct DriveSmartReadResult {
+ public uint BufferSize;
+ public DriverStatus DriverStatus;
+ public byte Version;
+ public byte Reserved;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_DRIVE_ATTRIBUTES)]
+ public DriveAttribute[] Attributes;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct Identify {
+ public ushort GeneralConfiguration;
+ public ushort NumberOfCylinders;
+ public ushort Reserved;
+ public ushort NumberOfHeads;
+ public ushort UnformattedBytesPerTrack;
+ public ushort UnformattedBytesPerSector;
+ public ushort SectorsPerTrack;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
+ public ushort[] VendorUnique;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 20)]
+ public byte[] SerialNumber;
+ public ushort BufferType;
+ public ushort BufferSectorSize;
+ public ushort NumberOfEccBytes;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
+ public byte[] FirmwareRevision;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 40)]
+ public byte[] ModelNumber;
+ public ushort MoreVendorUnique;
+ public ushort DoubleWordIo;
+ public ushort Capabilities;
+ public ushort MoreReserved;
+ public ushort PioCycleTimingMode;
+ public ushort DmaCycleTimingMode;
+ [MarshalAs(UnmanagedType.ByValArray, SizeConst = 406)]
+ public byte[] More;
+ }
+
+ [StructLayout(LayoutKind.Sequential, Pack = 1)]
+ private struct DriveIdentifyResult {
+ public uint BufferSize;
+ public DriverStatus DriverStatus;
+ public Identify Identify;
+ }
+
+ public static readonly IntPtr INVALID_HANDLE_VALUE = (IntPtr)(-1);
+
+ private const byte SMART_CMD = 0xB0;
+ private const byte ID_CMD = 0xEC;
+
+ private const byte SMART_READ_DATA = 0xD0;
+ private const byte SMART_ENABLE_OPERATIONS = 0xD8;
+
+ private const byte SMART_LBA_MID = 0x4F;
+ private const byte SMART_LBA_HI = 0xC2;
+
+ private const int MAX_DRIVE_ATTRIBUTES = 512;
+
+ private const string KERNEL = "kernel32.dll";
+
+ [DllImport(KERNEL, CallingConvention = CallingConvention.Winapi)]
+ private static extern IntPtr CreateFile(string fileName,
+ AccessMode desiredAccess, ShareMode shareMode, IntPtr securityAttributes,
+ CreationMode creationDisposition, FileAttribute flagsAndAttributes,
+ IntPtr templateFilehandle);
+
+ [DllImport(KERNEL, CallingConvention = CallingConvention.Winapi)]
+ public static extern int CloseHandle(IntPtr handle);
+
+ [DllImport(KERNEL, CallingConvention = CallingConvention.Winapi)]
+ private static extern bool DeviceIoControl(IntPtr handle,
+ DriveCommand command, ref DriveCommandParameter parameter,
+ int parameterSize, out DriveSmartReadResult result, int resultSize,
+ out uint bytesReturned, IntPtr overlapped);
+
+ [DllImport(KERNEL, CallingConvention = CallingConvention.Winapi)]
+ private static extern bool DeviceIoControl(IntPtr handle,
+ DriveCommand command, ref DriveCommandParameter parameter,
+ int parameterSize, out DriveCommandResult result, int resultSize,
+ out uint bytesReturned, IntPtr overlapped);
+
+ [DllImport(KERNEL, CallingConvention = CallingConvention.Winapi)]
+ private static extern bool DeviceIoControl(IntPtr handle,
+ DriveCommand command, ref DriveCommandParameter parameter,
+ int parameterSize, out DriveIdentifyResult result, int resultSize,
+ out uint bytesReturned, IntPtr overlapped);
+
+ public static IntPtr OpenPhysicalDrive(int driveNumber) {
+ return CreateFile(@"\\.\PhysicalDrive" + driveNumber,
+ AccessMode.Read | AccessMode.Write, ShareMode.Read | ShareMode.Write,
+ IntPtr.Zero, CreationMode.OpenExisting, FileAttribute.Device,
+ IntPtr.Zero);
+ }
+
+ public static bool EnableSmart(IntPtr handle, int driveNumber) {
+ DriveCommandParameter parameter = new DriveCommandParameter();
+ DriveCommandResult result;
+ uint bytesReturned;
+
+ parameter.DriveNumber = (byte)driveNumber;
+ parameter.Registers.Features = SMART_ENABLE_OPERATIONS;
+ parameter.Registers.LBAMid = SMART_LBA_MID;
+ parameter.Registers.LBAHigh = SMART_LBA_HI;
+ parameter.Registers.Command = SMART_CMD;
+
+ return DeviceIoControl(handle, DriveCommand.SendDriveCommand,
+ ref parameter, Marshal.SizeOf(parameter), out result,
+ Marshal.SizeOf(typeof(DriveCommandResult)), out bytesReturned,
+ IntPtr.Zero);
+ }
+
+ public static DriveAttribute[] ReadSmart(IntPtr handle, int driveNumber) {
+ DriveCommandParameter parameter = new DriveCommandParameter();
+ DriveSmartReadResult result;
+ uint bytesReturned;
+
+ parameter.DriveNumber = (byte)driveNumber;
+ parameter.Registers.Features = SMART_READ_DATA;
+ parameter.Registers.LBAMid = SMART_LBA_MID;
+ parameter.Registers.LBAHigh = SMART_LBA_HI;
+ parameter.Registers.Command = SMART_CMD;
+
+ bool valid = DeviceIoControl(handle, DriveCommand.ReceiveDriveData,
+ ref parameter, Marshal.SizeOf(parameter), out result,
+ Marshal.SizeOf(typeof(DriveSmartReadResult)), out bytesReturned,
+ IntPtr.Zero);
+
+ if (!valid)
+ return null;
+ else
+ return result.Attributes;
+ }
+
+ public static string ReadName(IntPtr handle, int driveNumber) {
+ DriveCommandParameter parameter = new DriveCommandParameter();
+ DriveIdentifyResult result;
+ uint bytesReturned;
+
+ parameter.DriveNumber = (byte)driveNumber;
+ parameter.Registers.Command = ID_CMD;
+
+ bool valid = DeviceIoControl(handle, DriveCommand.ReceiveDriveData,
+ ref parameter, Marshal.SizeOf(parameter), out result,
+ Marshal.SizeOf(typeof(DriveIdentifyResult)), out bytesReturned,
+ IntPtr.Zero);
+
+ if (!valid)
+ return null;
+ else {
+
+ byte[] bytes = result.Identify.ModelNumber;
+ char[] chars = new char[bytes.Length];
+ for (int i = 0; i < bytes.Length; i += 2) {
+ chars[i] = (char)bytes[i + 1];
+ chars[i + 1] = (char)bytes[i];
+ }
+
+ return new string(chars).Trim();
+ }
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/IGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/IGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,52 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public interface IGroup {
+
+ IHardware[] Hardware { get; }
+
+ string GetReport();
+
+ void Close();
+ }
+
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/IHardware.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/IHardware.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,62 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public delegate void SensorEventHandler(ISensor sensor);
+
+ public interface IHardware {
+
+ string Name { get; }
+ string Identifier { get; }
+
+ Image Icon { get; }
+
+ string GetReport();
+
+ void Update();
+
+ ISensor[] Sensors { get; }
+
+ event SensorEventHandler SensorAdded;
+ event SensorEventHandler SensorRemoved;
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/ISensor.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/ISensor.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,66 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public enum SensorType {
+ Voltage,
+ Clock,
+ Temperature,
+ Fan
+ }
+
+ public interface ISensorEntry {
+ float Value { get; }
+ DateTime Time { get; }
+ }
+
+ public interface ISensor {
+ SensorType SensorType { get; }
+ string Name { get; set; }
+ int Index { get; }
+ float? Value { get; }
+ float? Min { get; }
+ float? Max { get; }
+ float? Limit { get; set; }
+ IEnumerable<ISensorEntry> Plot { get; }
+ }
+
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/LPC/Chip.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/LPC/Chip.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,17 @@
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.LPC {
+
+ public enum Chip : ushort {
+ Unknown = 0,
+ IT8716F = 0x8716,
+ IT8718F = 0x8718,
+ IT8720F = 0x8720,
+ IT8726F = 0x8726,
+ W83627DHG = 0xA020
+ }
+
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/LPC/IT87.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/LPC/IT87.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,225 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.LPC {
+ public class IT87 : IHardware {
+
+ private string name;
+ private Image icon;
+
+ private bool available = false;
+ private Chip chip;
+ private ushort address;
+
+ private Sensor[] temperatures;
+ private Sensor[] fans;
+ private Sensor[] voltages;
+ private List<ISensor> active = new List<ISensor>();
+ private float[] voltageGains;
+
+
+ // Consts
+ private const byte ITE_VENDOR_ID = 0x90;
+
+ // Environment Controller
+ private const byte ADDRESS_REGISTER_OFFSET = 0x05;
+ private const byte DATA_REGISTER_OFFSET = 0x06;
+
+ // Environment Controller Registers
+ private const byte CONFIGURATION_REGISTER = 0x00;
+ private const byte TEMPERATURE_BASE_REG = 0x29;
+ private const byte VENDOR_ID_REGISTER = 0x58;
+ private const byte FAN_TACHOMETER_16_BIT_ENABLE_REGISTER = 0x0c;
+ private byte[] FAN_TACHOMETER_REG =
+ new byte[] { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
+ private byte[] FAN_TACHOMETER_EXT_REG =
+ new byte[] { 0x18, 0x19, 0x1a, 0x81, 0x83 };
+ private const byte VOLTAGE_BASE_REG = 0x20;
+
+
+ private byte ReadByte(byte register) {
+ WinRing0.WriteIoPortByte(
+ (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
+ return WinRing0.ReadIoPortByte((ushort)(address + DATA_REGISTER_OFFSET));
+ }
+
+ public IT87(Chip chip, ushort address) {
+
+ this.chip = chip;
+ this.address = address;
+
+ switch (chip) {
+ case Chip.IT8716F: name = "ITE IT8716F"; break;
+ case Chip.IT8718F: name = "ITE IT8718F"; break;
+ case Chip.IT8720F: name = "ITE IT8720F"; break;
+ case Chip.IT8726F: name = "ITE IT8726F"; break;
+ default: return;
+ }
+
+ // Check vendor id
+ byte vendorId = ReadByte(VENDOR_ID_REGISTER);
+ if (vendorId != ITE_VENDOR_ID)
+ return;
+
+ // Bit 0x10 of the configuration register should always be 1
+ if ((ReadByte(CONFIGURATION_REGISTER) & 0x10) == 0)
+ return;
+
+ temperatures = new Sensor[3];
+ for (int i = 0; i < temperatures.Length; i++)
+ temperatures[i] = new Sensor("Temperature #" + (i + 1), i,
+ SensorType.Temperature, this);
+
+ fans = new Sensor[4];
+ for (int i = 0; i < fans.Length; i++)
+ fans[i] = new Sensor("Fan #" + (i + 1), i, SensorType.Fan, this);
+
+ voltageGains = new float[] {
+ 1, 1, 1, (6.8f / 10 + 1), 1, 1, 1, 1, 1 };
+
+ voltages = new Sensor[2];
+ voltages[0] = new Sensor("CPU VCore", 0, SensorType.Voltage, this);
+ voltages[1] = new Sensor("Battery", 8, SensorType.Voltage, this);
+
+ available = true;
+ icon = Utilities.EmbeddedResources.GetImage("chip.png");
+ }
+
+ public bool IsAvailable {
+ get { return available; }
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/lpc/it87"; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get { return active.ToArray(); }
+ }
+
+ public string GetReport() {
+ StringBuilder r = new StringBuilder();
+
+ r.AppendLine("LPC IT87");
+ r.AppendLine();
+ r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
+ r.Append("Chip Name: "); r.AppendLine(name);
+ r.Append("Base Address: 0x"); r.AppendLine(address.ToString("X"));
+ r.AppendLine();
+ r.AppendLine("Environment Controller Registers");
+ r.AppendLine();
+
+ r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
+ r.AppendLine();
+ for (int i = 0; i <= 0xA; i++) {
+ r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append(" ");
+ for (int j = 0; j <= 0xF; j++) {
+ r.Append(" ");
+ r.Append(ReadByte((byte)((i << 4) | j)).ToString("X2"));
+ }
+ r.AppendLine();
+ }
+ r.AppendLine();
+
+ return r.ToString();
+ }
+
+ public void Update() {
+
+ foreach (Sensor sensor in voltages) {
+ int value = ReadByte((byte)(VOLTAGE_BASE_REG + sensor.Index));
+ sensor.Value = voltageGains[sensor.Index] * 0.001f * (value << 4);
+ if (sensor.Value > 0)
+ ActivateSensor(sensor);
+ else
+ DeactivateSensor(sensor);
+ }
+
+ foreach (Sensor sensor in temperatures) {
+ int value = ReadByte((byte)(TEMPERATURE_BASE_REG + sensor.Index));
+ sensor.Value = value;
+ if (value < 254)
+ ActivateSensor(sensor);
+ else
+ DeactivateSensor(sensor);
+ }
+
+ foreach (Sensor sensor in fans) {
+ int value = ReadByte(FAN_TACHOMETER_REG[sensor.Index]);
+ value |= ReadByte(FAN_TACHOMETER_EXT_REG[sensor.Index]) << 8;
+
+ if (value > 0) {
+ sensor.Value = (value < 0xffff) ? 1.35e6f / ((value) * 2) : 0;
+ ActivateSensor(sensor);
+ } else {
+ DeactivateSensor(sensor);
+ }
+ }
+ }
+
+ private void ActivateSensor(Sensor sensor) {
+ if (!active.Contains(sensor)) {
+ active.Add(sensor);
+ SensorAdded(sensor);
+ }
+ }
+
+ private void DeactivateSensor(Sensor sensor) {
+ if (active.Contains(sensor)) {
+ active.Remove(sensor);
+ SensorRemoved(sensor);
+ }
+ }
+
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/LPC/LPCGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/LPC/LPCGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,176 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+using System.Threading;
+
+namespace OpenHardwareMonitor.Hardware.LPC {
+ public class LPCGroup : IGroup {
+ private List<IHardware> hardware = new List<IHardware>();
+
+ private Chip chip = Chip.Unknown;
+
+ // I/O Ports
+ private const ushort REGISTER_PORT = 0x2e;
+ private const ushort VALUE_PORT = 0x2f;
+
+ // Registers
+ private const byte CONFIGURATION_CONTROL_REGISTER = 0x02;
+ private const byte DEVCIE_SELECT_REGISTER = 0x07;
+ private const byte CHIP_ID_REGISTER = 0x20;
+ private const byte CHIP_REVISION_REGISTER = 0x21;
+
+ private static byte ReadByte(byte register) {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, register);
+ return WinRing0.ReadIoPortByte(VALUE_PORT);
+ }
+
+ private static ushort ReadWord(byte register) {
+ ushort value;
+ WinRing0.WriteIoPortByte(REGISTER_PORT, register);
+ value = (ushort)(((ushort)WinRing0.ReadIoPortByte(VALUE_PORT)) << 8);
+ WinRing0.WriteIoPortByte(REGISTER_PORT, (byte)(register + 1));
+ value |= (ushort)WinRing0.ReadIoPortByte(VALUE_PORT);
+ return value;
+ }
+
+ private static void Select(byte logicalDeviceNumber) {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, DEVCIE_SELECT_REGISTER);
+ WinRing0.WriteIoPortByte(VALUE_PORT, logicalDeviceNumber);
+ }
+
+ // IT87
+ private const ushort IT8716F_CHIP_ID = 0x8716;
+ private const ushort IT8718F_CHIP_ID = 0x8718;
+ private const ushort IT8720F_CHIP_ID = 0x8720;
+ private const ushort IT8726F_CHIP_ID = 0x8726;
+
+ private const byte IT87_ENVIRONMENT_CONTROLLER_LDN = 0x04;
+ private const byte IT87_ENVIRONMENT_CONTROLLER_BASE_ADDR_REG = 0x60;
+
+ private static void IT87Enter() {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x87);
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x01);
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x55);
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x55);
+ }
+
+ internal static void IT87Exit() {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, CONFIGURATION_CONTROL_REGISTER);
+ WinRing0.WriteIoPortByte(VALUE_PORT, 0x02);
+ }
+
+ // Winbond
+ private static void WinbondEnter() {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x87);
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0x87);
+ }
+
+ private static void WinbondExit() {
+ WinRing0.WriteIoPortByte(REGISTER_PORT, 0xAA);
+ }
+
+ public LPCGroup() {
+ if (!WinRing0.IsAvailable)
+ return;
+
+ WinbondEnter();
+
+ byte id = ReadByte(CHIP_ID_REGISTER);
+ byte revision = ReadByte(CHIP_REVISION_REGISTER);
+ switch (id) {
+ case 0xA0:
+ switch (revision & 0xF0) {
+ case 0x20: chip = Chip.W83627DHG; break;
+ default: chip = Chip.Unknown; break;
+ } break;
+ default: chip = Chip.Unknown; break;
+ }
+ if (chip != Chip.Unknown) {
+
+ WinbondExit();
+
+ W83627DHG w83627dhg = new W83627DHG(revision);
+ if (w83627dhg.IsAvailable)
+ hardware.Add(w83627dhg);
+ return;
+ }
+
+ IT87Enter();
+
+ switch (ReadWord(CHIP_ID_REGISTER)) {
+ case 0x8716: chip = Chip.IT8716F; break;
+ case 0x8718: chip = Chip.IT8718F; break;
+ case 0x8720: chip = Chip.IT8720F; break;
+ case 0x8726: chip = Chip.IT8726F; break;
+ default: chip = Chip.Unknown; break;
+ }
+
+ if (chip != Chip.Unknown) {
+ Select(IT87_ENVIRONMENT_CONTROLLER_LDN);
+ ushort address = ReadWord(IT87_ENVIRONMENT_CONTROLLER_BASE_ADDR_REG);
+ Thread.Sleep(1);
+ ushort verify = ReadWord(IT87_ENVIRONMENT_CONTROLLER_BASE_ADDR_REG);
+
+ IT87Exit();
+
+ if (address != verify || address == 0 || (address & 0xF007) != 0)
+ return;
+
+ IT87 it87 = new IT87(chip, address);
+ if (it87.IsAvailable)
+ hardware.Add(it87);
+
+ return;
+ }
+ }
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Close() { }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/LPC/W83627DHG.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/LPC/W83627DHG.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,60 @@
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.LPC {
+ public class W83627DHG : IHardware {
+
+ private byte revision;
+
+ private string name;
+ private Image icon;
+
+ private bool available = false;
+
+ public W83627DHG(byte revision) {
+ this.revision = revision;
+
+ this.name = "Winbond W83627DHG";
+ this.icon = Utilities.EmbeddedResources.GetImage("chip.png");
+ }
+
+ public bool IsAvailable {
+ get { return available; }
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/lpc/w83627dhg"; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get { return new ISensor[0]; }
+ }
+
+ public string GetReport() {
+ StringBuilder r = new StringBuilder();
+
+ r.AppendLine("LPC W83627DHG");
+ r.AppendLine();
+ r.Append("Chip revision: 0x"); r.AppendLine(revision.ToString("X"));
+
+ return r.ToString();
+ }
+
+ public void Update() { }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/Nvidia/NVAPI.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/Nvidia/NVAPI.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,243 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.Nvidia {
+
+ public enum NvStatus {
+ OK = 0,
+ ERROR = -1,
+ LIBRARY_NOT_FOUND = -2,
+ NO_IMPLEMENTATION = -3,
+ API_NOT_INTIALIZED = -4,
+ INVALID_ARGUMENT = -5,
+ NVIDIA_DEVICE_NOT_FOUND = -6,
+ END_ENUMERATION = -7,
+ INVALID_HANDLE = -8,
+ INCOMPATIBLE_STRUCT_VERSION = -9,
+ HANDLE_INVALIDATED = -10,
+ OPENGL_CONTEXT_NOT_CURRENT = -11,
+ NO_GL_EXPERT = -12,
+ INSTRUMENTATION_DISABLED = -13,
+ EXPECTED_LOGICAL_GPU_HANDLE = -100,
+ EXPECTED_PHYSICAL_GPU_HANDLE = -101,
+ EXPECTED_DISPLAY_HANDLE = -102,
+ INVALID_COMBINATION = -103,
+ NOT_SUPPORTED = -104,
+ PORTID_NOT_FOUND = -105,
+ EXPECTED_UNATTACHED_DISPLAY_HANDLE = -106,
+ INVALID_PERF_LEVEL = -107,
+ DEVICE_BUSY = -108,
+ NV_PERSIST_FILE_NOT_FOUND = -109,
+ PERSIST_DATA_NOT_FOUND = -110,
+ EXPECTED_TV_DISPLAY = -111,
+ EXPECTED_TV_DISPLAY_ON_DCONNECTOR = -112,
+ NO_ACTIVE_SLI_TOPOLOGY = -113,
+ SLI_RENDERING_MODE_NOTALLOWED = -114,
+ EXPECTED_DIGITAL_FLAT_PANEL = -115,
+ ARGUMENT_EXCEED_MAX_SIZE = -116,
+ DEVICE_SWITCHING_NOT_ALLOWED = -117,
+ TESTING_CLOCKS_NOT_SUPPORTED = -118,
+ UNKNOWN_UNDERSCAN_CONFIG = -119,
+ TIMEOUT_RECONFIGURING_GPU_TOPO = -120,
+ DATA_NOT_FOUND = -121,
+ EXPECTED_ANALOG_DISPLAY = -122,
+ NO_VIDLINK = -123,
+ REQUIRES_REBOOT = -124,
+ INVALID_HYBRID_MODE = -125,
+ MIXED_TARGET_TYPES = -126,
+ SYSWOW64_NOT_SUPPORTED = -127,
+ IMPLICIT_SET_GPU_TOPOLOGY_CHANGE_NOT_ALLOWED = -128,
+ REQUEST_USER_TO_CLOSE_NON_MIGRATABLE_APPS = -129,
+ OUT_OF_MEMORY = -130,
+ WAS_STILL_DRAWING = -131,
+ FILE_NOT_FOUND = -132,
+ TOO_MANY_UNIQUE_STATE_OBJECTS = -133,
+ INVALID_CALL = -134,
+ D3D10_1_LIBRARY_NOT_FOUND = -135,
+ FUNCTION_NOT_FOUND = -136
+ }
+
+ public enum NvThermalController {
+ NONE = 0,
+ GPU_INTERNAL,
+ ADM1032,
+ MAX6649,
+ MAX1617,
+ LM99,
+ LM89,
+ LM64,
+ ADT7473,
+ SBMAX6649,
+ VBIOSEVT,
+ OS,
+ UNKNOWN = -1,
+ }
+
+ public enum NvThermalTarget {
+ NONE = 0,
+ GPU = 1,
+ MEMORY = 2,
+ POWER_SUPPLY = 4,
+ BOARD = 8,
+ ALL = 15,
+ UNKNOWN = -1
+ };
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct NvSensor {
+ public NvThermalController Controller;
+ public int DefaultMinTemp;
+ public int DefaultMaxTemp;
+ public int CurrentTemp;
+ public NvThermalTarget Target;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct NvGPUThermalSettings {
+ public int Version;
+ public int Count;
+ [MarshalAs(UnmanagedType.ByValArray,
+ SizeConst = NVAPI.MAX_THERMAL_SENSORS_PER_GPU)]
+ public NvSensor[] Sensor;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct NvDisplayHandle {
+ private int handle;
+ }
+
+ [StructLayout(LayoutKind.Sequential)]
+ public struct NvPhysicalGpuHandle {
+ private int handle;
+ }
+
+ public class NVAPI {
+
+ private const int SHORT_STRING_MAX = 64;
+
+ public const int MAX_THERMAL_SENSORS_PER_GPU = 3;
+ public const int MAX_PHYSICAL_GPUS = 64;
+ public static readonly int GPU_THERMAL_SETTINGS_VER =
+ Marshal.SizeOf(typeof(NvGPUThermalSettings)) | 0x10000;
+
+ private delegate IntPtr nvapi_QueryInterfaceDelegate(uint id);
+ private delegate NvStatus NvAPI_InitializeDelegate();
+ private delegate NvStatus NvAPI_GPU_GetFullNameDelegate(
+ NvPhysicalGpuHandle gpuHandle, StringBuilder name);
+
+ public delegate NvStatus NvAPI_GPU_GetThermalSettingsDelegate(
+ NvPhysicalGpuHandle gpuHandle, int sensorIndex,
+ ref NvGPUThermalSettings nvGPUThermalSettings);
+ public delegate NvStatus NvAPI_EnumNvidiaDisplayHandleDelegate(int thisEnum,
+ ref NvDisplayHandle displayHandle);
+ public delegate NvStatus NvAPI_GetPhysicalGPUsFromDisplayDelegate(
+ NvDisplayHandle displayHandle, [Out] NvPhysicalGpuHandle[] gpuHandles,
+ out int gpuCount);
+ public delegate NvStatus NvAPI_EnumPhysicalGPUsDelegate(
+ [Out] NvPhysicalGpuHandle[] gpuHandles, out int gpuCount);
+
+ private static bool available = false;
+ private static nvapi_QueryInterfaceDelegate nvapi_QueryInterface;
+ private static NvAPI_InitializeDelegate NvAPI_Initialize;
+ private static NvAPI_GPU_GetFullNameDelegate _NvAPI_GPU_GetFullName;
+
+ public static NvAPI_GPU_GetThermalSettingsDelegate
+ NvAPI_GPU_GetThermalSettings;
+ public static NvAPI_EnumNvidiaDisplayHandleDelegate
+ NvAPI_EnumNvidiaDisplayHandle;
+ public static NvAPI_GetPhysicalGPUsFromDisplayDelegate
+ NvAPI_GetPhysicalGPUsFromDisplay;
+ public static NvAPI_EnumPhysicalGPUsDelegate
+ NvAPI_EnumPhysicalGPUs;
+
+ public static NvStatus NvAPI_GPU_GetFullName(NvPhysicalGpuHandle gpuHandle,
+ out string name) {
+ StringBuilder builder = new StringBuilder(SHORT_STRING_MAX);
+ NvStatus status = _NvAPI_GPU_GetFullName(gpuHandle, builder);
+ name = builder.ToString();
+ return status;
+ }
+
+ private static string GetDllName() {
+ if (IntPtr.Size == 4) {
+ return "nvapi.dll";
+ } else {
+ return "nvapi64.dll";
+ }
+ }
+
+ private static void GetDelegate<T>(uint id, out T newDelegate)
+ where T : class
+ {
+ IntPtr ptr = nvapi_QueryInterface(id);
+ newDelegate = Marshal.GetDelegateForFunctionPointer(ptr, typeof(T)) as T;
+ }
+
+ static NVAPI() {
+ DllImportAttribute attribute = new DllImportAttribute(GetDllName());
+ attribute.CallingConvention = CallingConvention.Cdecl;
+ attribute.PreserveSig = true;
+ attribute.EntryPoint = "nvapi_QueryInterface";
+ PInvokeDelegateFactory.CreateDelegate(attribute,
+ out nvapi_QueryInterface);
+
+ try {
+ GetDelegate(0x0150E828, out NvAPI_Initialize);
+ } catch (DllNotFoundException) { return; }
+ catch (ArgumentNullException) { return; }
+
+ if (NvAPI_Initialize() == NvStatus.OK) {
+ GetDelegate(0xE3640A56, out NvAPI_GPU_GetThermalSettings);
+ GetDelegate(0xCEEE8E9F, out _NvAPI_GPU_GetFullName);
+ GetDelegate(0x9ABDD40D, out NvAPI_EnumNvidiaDisplayHandle);
+ GetDelegate(0x34EF9506, out NvAPI_GetPhysicalGPUsFromDisplay);
+ GetDelegate(0xE5AC921F, out NvAPI_EnumPhysicalGPUs);
+ available = true;
+ }
+ }
+
+ public static bool IsAvailable {
+ get { return available; }
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/Nvidia/NvidiaGPU.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/Nvidia/NvidiaGPU.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,126 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+
+namespace OpenHardwareMonitor.Hardware.Nvidia {
+ public class NvidiaGPU : IHardware {
+
+ private string name;
+ private Image icon;
+ private int adapterIndex;
+ private NvPhysicalGpuHandle handle;
+
+ private Sensor[] temperatures;
+
+ public NvidiaGPU(int adapterIndex, NvPhysicalGpuHandle handle) {
+ try {
+ string gpuName;
+ NVAPI.NvAPI_GPU_GetFullName(handle, out gpuName);
+ this.name = "NVIDIA " + gpuName;
+ this.icon = Utilities.EmbeddedResources.GetImage("nvidia.png");
+ this.adapterIndex = adapterIndex;
+ this.handle = handle;
+
+ NvGPUThermalSettings settings = GetThermalSettings();
+ temperatures = new Sensor[settings.Count];
+ for (int i = 0; i < temperatures.Length; i++) {
+ NvSensor sensor = settings.Sensor[i];
+ string name;
+ switch (sensor.Target) {
+ case NvThermalTarget.BOARD: name = "GPU Board"; break;
+ case NvThermalTarget.GPU: name = "GPU Core"; break;
+ case NvThermalTarget.MEMORY: name = "GPU Memory"; break;
+ case NvThermalTarget.POWER_SUPPLY: name = "GPU Power Supply"; break;
+ case NvThermalTarget.UNKNOWN: name = "GPU Unknown"; break;
+ default: name = "GPU"; break;
+ }
+ temperatures[i] = new Sensor(name, i, sensor.DefaultMaxTemp,
+ SensorType.Temperature, this);
+ }
+ } catch (Exception e) {
+ System.Windows.Forms.MessageBox.Show(e.Message + "\n" + e.StackTrace);
+ }
+ }
+
+ public string Name {
+ get { return name; }
+ }
+
+ public string Identifier {
+ get { return "/nvidiagpu/" + adapterIndex; }
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public ISensor[] Sensors {
+ get {
+ return temperatures;
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ private NvGPUThermalSettings GetThermalSettings() {
+ NvGPUThermalSettings settings = new NvGPUThermalSettings();
+ settings.Version = NVAPI.GPU_THERMAL_SETTINGS_VER;
+ settings.Count = NVAPI.MAX_THERMAL_SENSORS_PER_GPU;
+ settings.Sensor = new NvSensor[NVAPI.MAX_THERMAL_SENSORS_PER_GPU];
+ NVAPI.NvAPI_GPU_GetThermalSettings(handle, (int)NvThermalTarget.ALL,
+ ref settings);
+ return settings;
+ }
+
+ public void Update() {
+ NvGPUThermalSettings settings = GetThermalSettings();
+ foreach (Sensor sensor in temperatures)
+ sensor.Value = settings.Sensor[sensor.Index].CurrentTemp;
+ }
+
+ #pragma warning disable 67
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ #pragma warning restore 67
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/Nvidia/NvidiaGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/Nvidia/NvidiaGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,74 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+
+namespace OpenHardwareMonitor.Hardware.Nvidia {
+
+ public class NvidiaGroup : IGroup {
+ private List<IHardware> hardware = new List<IHardware>();
+
+ public NvidiaGroup() {
+ if (!NVAPI.IsAvailable)
+ return;
+
+ NvPhysicalGpuHandle[] handles =
+ new NvPhysicalGpuHandle[NVAPI.MAX_PHYSICAL_GPUS];
+
+ int count;
+ if (NVAPI.NvAPI_EnumPhysicalGPUs(handles, out count) != NvStatus.OK)
+ return;
+
+ for (int i = 0; i < count; i++)
+ hardware.Add(new NvidiaGPU(i, handles[i]));
+ }
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Close() {
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/ReportWriter.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/ReportWriter.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,47 @@
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware {
+ public class ReportWriter {
+
+ private static void NewSection(TextWriter writer) {
+ for (int i = 0; i < 8; i++)
+ writer.Write("----------");
+ writer.WriteLine();
+ writer.WriteLine();
+ }
+
+ public static void Save(List<IGroup> groupList, Version version) {
+
+ using (TextWriter w =
+ new StreamWriter("OpenHardwareMonitor.Report.txt")) {
+
+ w.WriteLine();
+ w.WriteLine("Open Hardware Monitor Report");
+ w.WriteLine();
+ NewSection(w);
+ w.Write("Version: "); w.WriteLine(version.ToString());
+ w.WriteLine();
+
+ foreach (IGroup group in groupList) {
+ string report = group.GetReport();
+ if (report != null) {
+ NewSection(w);
+ w.Write(report);
+ }
+
+ IHardware[] hardwareArray = group.Hardware;
+ foreach (IHardware hardware in hardwareArray) {
+ string hardwareReport = hardware.GetReport();
+ if (hardwareReport != null) {
+ NewSection(w);
+ w.Write(hardwareReport);
+ }
+ }
+ }
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/SMBIOS/SMBIOSGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/SMBIOS/SMBIOSGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,198 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Management;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.SMBIOS {
+
+ public class SMBIOSGroup : IGroup {
+
+ private Structure[] table;
+
+ private BIOSInformation biosInformation = null;
+
+ private BaseBoardInformation baseBoardInformation = null;
+
+ public SMBIOSGroup() {
+ int p = (int)System.Environment.OSVersion.Platform;
+ if ((p == 4) || (p == 128))
+ return;
+
+ ManagementObjectCollection collection = new ManagementObjectSearcher(
+ "root\\WMI", "SELECT SMBiosData FROM MSSMBios_RawSMBiosTables").Get();
+
+ byte[] raw = null;
+ foreach (ManagementObject mo in collection) {
+ raw = (byte[])mo["SMBiosData"];
+ break;
+ }
+
+ List<Structure> structureList = new List<Structure>();
+ if (raw != null && raw.Length > 0) {
+ int offset = 0;
+ byte type = raw[offset];
+ while (offset < raw.Length && type != 127) {
+
+ type = raw[offset]; offset++;
+ int length = raw[offset]; offset++;
+ ushort handle = (ushort)((raw[offset] << 8) | raw[offset + 1]);
+ offset += 2;
+
+ byte[] data = new byte[length];
+ Array.Copy(raw, offset - 4, data, 0, length); offset += length - 4;
+
+ List<string> stringsList = new List<string>();
+ if (raw[offset] == 0)
+ offset++;
+ while (raw[offset] != 0) {
+ StringBuilder sb = new StringBuilder();
+ while (raw[offset] != 0) {
+ sb.Append((char)raw[offset]); offset++;
+ }
+ offset++;
+ stringsList.Add(sb.ToString());
+ }
+ offset++;
+ switch (type) {
+ case 0x00:
+ this.biosInformation = new BIOSInformation(
+ type, handle, data, stringsList.ToArray());
+ structureList.Add(this.biosInformation); break;
+ case 0x02: this.baseBoardInformation = new BaseBoardInformation(
+ type, handle, data, stringsList.ToArray());
+ structureList.Add(this.baseBoardInformation); break;
+ default: structureList.Add(new Structure(
+ type, handle, data, stringsList.ToArray())); break;
+ }
+ }
+ }
+ table = structureList.ToArray();
+ }
+
+ public IHardware[] Hardware { get { return new IHardware[0]; } }
+
+ public string GetReport() {
+ StringBuilder r = new StringBuilder();
+
+ r.AppendLine("SMBIOS");
+ r.AppendLine();
+
+ if (biosInformation != null) {
+ r.Append("BIOS Vendor: "); r.AppendLine(biosInformation.Vendor);
+ r.Append("BIOS Version: "); r.AppendLine(biosInformation.Version);
+ r.AppendLine();
+ }
+
+ if (baseBoardInformation != null) {
+ r.Append("Mainboard Manufacturer: ");
+ r.AppendLine(baseBoardInformation.Manufacturer);
+ r.Append("Mainboard Name: ");
+ r.AppendLine(baseBoardInformation.ProductName);
+ r.AppendLine();
+ }
+
+ return r.ToString();
+ }
+
+ public void Close() { }
+
+ public class Structure {
+ private byte type;
+ private ushort handle;
+
+ private byte[] data;
+ private string[] strings;
+
+ public Structure(byte type, ushort handle, byte[] data, string[] strings)
+ {
+ this.type = type;
+ this.handle = handle;
+ this.data = data;
+ this.strings = strings;
+ }
+
+ public byte Type { get { return type; } }
+
+ public ushort Handle { get { return handle; } }
+ }
+
+ public class BIOSInformation : Structure {
+
+ private string vendor = "";
+ private string version = "";
+
+ public BIOSInformation(byte type, ushort handle, byte[] data,
+ string[] strings)
+ : base(type, handle, data, strings) {
+
+ if (data[0x04] > 0 && data[0x04] <= strings.Length)
+ vendor = strings[data[0x04] - 1];
+
+ if (data[0x05] > 0 && data[0x05] <= strings.Length)
+ version = strings[data[0x05] - 1];
+ }
+
+ public string Vendor { get { return vendor; } }
+
+ public string Version { get { return version; } }
+ }
+
+ public class BaseBoardInformation : Structure {
+
+ private string manufacturer = "";
+ private string productName = "";
+
+ public BaseBoardInformation(byte type, ushort handle, byte[] data,
+ string[] strings)
+ : base(type, handle, data, strings) {
+
+ if (data[0x04] > 0 && data[0x04] <= strings.Length)
+ manufacturer = strings[data[0x04] - 1];
+
+ if (data[0x05] > 0 && data[0x05] <= strings.Length)
+ productName = strings[data[0x05] - 1];
+ }
+
+ public string Manufacturer { get { return manufacturer; } }
+
+ public string ProductName { get { return productName; } }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/Sensor.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/Sensor.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,185 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public class Sensor : ISensor {
+
+ private string defaultName;
+ private string name;
+ private int index;
+ private SensorType sensorType;
+ private IHardware hardware;
+ private float? value;
+ private float? min;
+ private float? max;
+ private float? limit;
+ private float? defaultLimit;
+ private Queue<ISensorEntry> entries =
+ new Queue<ISensorEntry>(MAX_MINUTES * 15);
+
+ private float sum = 0;
+ private int count = 0;
+
+ private const int MAX_MINUTES = 120;
+
+ private string GetIdentifier() {
+ string s = "";
+ switch (sensorType) {
+ case SensorType.Voltage: s = "voltage"; break;
+ case SensorType.Clock: s = "clock"; break;
+ case SensorType.Temperature: s = "temperature"; break;
+ case SensorType.Fan: s = "fan"; break;
+ }
+ return hardware.Identifier + "/" + s + "/" + index;
+ }
+
+ public Sensor(string name, int index, SensorType sensorType,
+ IHardware hardware)
+ : this(name, index, null, sensorType, hardware) { }
+
+ public Sensor(string name, int index, float? limit,
+ SensorType sensorType, IHardware hardware)
+ {
+ this.defaultName = name;
+ this.index = index;
+ this.defaultLimit = limit;
+ this.sensorType = sensorType;
+ this.hardware = hardware;
+ string configName =
+ Utilities.Config.Settings[GetIdentifier() + "/name"];
+ if (configName != null)
+ this.name = configName;
+ else
+ this.name = name;
+ string configLimit =
+ Utilities.Config.Settings[GetIdentifier() + "/limit"];
+ if (configLimit != null && configLimit != "")
+ this.limit = float.Parse(configLimit);
+ else
+ this.limit = limit;
+ }
+
+ public SensorType SensorType {
+ get { return sensorType; }
+ }
+
+ public string Name {
+ get {
+ return name;
+ }
+ set {
+ if (value != "")
+ name = value;
+ else
+ name = defaultName;
+ Utilities.Config.Settings[GetIdentifier() + "/name"] = name;
+ }
+ }
+
+ public int Index {
+ get { return index; }
+ }
+
+ public float? Value {
+ get {
+ return value;
+ }
+ set {
+ while (entries.Count > 0 &&
+ (DateTime.Now - entries.Peek().Time).TotalMinutes > MAX_MINUTES)
+ entries.Dequeue();
+
+ if (value.HasValue) {
+ sum += value.Value;
+ count++;
+ if (count == 4) {
+ entries.Enqueue(new Entry(sum / count, DateTime.Now));
+ sum = 0;
+ count = 0;
+ }
+ }
+
+ this.value = value;
+ if (min > value || !min.HasValue)
+ min = value;
+ if (max < value || !max.HasValue)
+ max = value;
+ }
+ }
+
+ public float? Min { get { return min; } }
+ public float? Max { get { return max; } }
+
+ public float? Limit {
+ get {
+ return limit;
+ }
+
+ set {
+ if (value.HasValue) {
+ limit = value;
+ Utilities.Config.Settings[GetIdentifier() + "/limit"] =
+ limit.ToString();
+ } else {
+ limit = defaultLimit;
+ Utilities.Config.Settings[GetIdentifier() + "/limit"] = "";
+ }
+ }
+ }
+
+ public IEnumerable<ISensorEntry> Plot {
+ get { return entries; }
+ }
+
+ public struct Entry : ISensorEntry {
+ private float value;
+ private DateTime time;
+
+ public Entry(float value, DateTime time) {
+ this.value = value;
+ this.time = time;
+ }
+
+ public float Value { get { return value; } }
+ public DateTime Time { get { return time; } }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/TBalancer/TBalancer.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/TBalancer/TBalancer.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,198 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Configuration;
+using System.Drawing;
+using System.IO;
+using System.IO.Ports;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware.TBalancer {
+ public class TBalancer : IHardware {
+
+ private Image icon;
+ private SerialPort serialPort;
+ private Sensor[] digitalTemperatures = new Sensor[8];
+ private Sensor[] analogTemperatures = new Sensor[4];
+ private Sensor[] fans = new Sensor[4];
+ private List<ISensor> active = new List<ISensor>();
+ private List<ISensor> deactivating = new List<ISensor>();
+ private int[] data;
+
+ public const byte STARTFLAG = 100;
+ public const byte PROTOCOL_VERSION = 0x2A;
+
+ public TBalancer(string portName) {
+ icon = Utilities.EmbeddedResources.GetImage("bigng.png");
+
+ try {
+ serialPort = new SerialPort(portName, 19200, Parity.None, 8,
+ StopBits.One);
+ serialPort.Open();
+ Update();
+ } catch (IOException) { }
+
+ for (int i = 0; i < digitalTemperatures.Length; i++)
+ digitalTemperatures[i] = new Sensor("Digital Sensor #" + (i + 1), i,
+ SensorType.Temperature, this);
+
+ for (int i = 0; i < analogTemperatures.Length; i++)
+ analogTemperatures[i] = new Sensor("Analog Sensor #" + (i + 1),
+ i + digitalTemperatures.Length, SensorType.Temperature, this);
+ }
+
+ private void ActivateSensor(Sensor sensor) {
+ deactivating.Remove(sensor);
+ if (!active.Contains(sensor)) {
+ active.Add(sensor);
+ SensorAdded(sensor);
+ }
+ }
+
+ private void DeactivateSensor(Sensor sensor) {
+ if (deactivating.Contains(sensor)) {
+ active.Remove(sensor);
+ deactivating.Remove(sensor);
+ SensorRemoved(sensor);
+ } else if (active.Contains(sensor)) {
+ deactivating.Add(sensor);
+ }
+ }
+
+ private void ReadData() {
+ int[] data = new int[285];
+ for (int i = 0; i < data.Length; i++)
+ data[i] = serialPort.ReadByte();
+
+ if (data[0] != STARTFLAG || data[274] != PROTOCOL_VERSION) {
+ serialPort.DiscardInBuffer();
+ return;
+ }
+
+ for (int i = 0; i < digitalTemperatures.Length; i++)
+ if (data[238 + i] > 0) {
+ digitalTemperatures[i].Value = 0.5f * data[238 + i];
+ ActivateSensor(digitalTemperatures[i]);
+ } else {
+ DeactivateSensor(digitalTemperatures[i]);
+ }
+
+ for (int i = 0; i < analogTemperatures.Length; i++)
+ if (data[260 + i] > 0) {
+ analogTemperatures[i].Value = 0.5f * data[260 + i];
+ ActivateSensor(analogTemperatures[i]);
+ } else {
+ DeactivateSensor(analogTemperatures[i]);
+ }
+
+ for (int i = 0; i < fans.Length; i++) {
+ float maxRPM = 11.5f * ((data[149 + 2 * i] << 8) | data[148 + 2 * i]);
+
+ if (fans[i] == null)
+ fans[i] = new Sensor("Fan #" + (i + 1), i, maxRPM, SensorType.Fan,
+ this);
+
+ if ((data[136] & (1 << i)) == 0)
+ fans[i].Value = maxRPM * 0.01f * data[156 + i]; // pwm mode
+ else
+ fans[i].Value = maxRPM * 0.01f * data[141 + i]; // analog mode
+ ActivateSensor(fans[i]);
+ }
+ this.data = data;
+ }
+
+ public Image Icon {
+ get { return icon; }
+ }
+
+ public string Name {
+ get { return "T-Balancer bigNG"; }
+ }
+
+ public string Identifier {
+ get { return "/bigng/" +
+ serialPort.PortName.TrimStart(new char[]{'/'}).ToLower(); }
+ }
+
+ public ISensor[] Sensors {
+ get { return active.ToArray(); }
+ }
+
+ public string GetReport() {
+ StringBuilder r = new StringBuilder();
+
+ r.AppendLine("T-Balancer bigNG");
+ r.AppendLine();
+ r.Append("Port Name: "); r.AppendLine(serialPort.PortName);
+ r.AppendLine();
+ r.AppendLine("System Information Answer");
+ r.AppendLine();
+
+ r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
+ r.AppendLine();
+ for (int i = 0; i <= 0x11; i++) {
+ r.Append(" "); r.Append((i << 4).ToString("X3")); r.Append(" ");
+ for (int j = 0; j <= 0xF; j++) {
+ int index = ((i << 4) | j);
+ if (index < data.Length) {
+ r.Append(" ");
+ r.Append(data[index].ToString("X2"));
+ }
+ }
+ r.AppendLine();
+ }
+ r.AppendLine();
+
+ return r.ToString();
+ }
+
+ public void Update() {
+ while (serialPort.BytesToRead >= 285)
+ ReadData();
+ serialPort.Write(new byte[] { 0x38 }, 0, 1);
+ }
+
+ public void Close() {
+ serialPort.Close();
+ }
+
+ public event SensorEventHandler SensorAdded;
+ public event SensorEventHandler SensorRemoved;
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/TBalancer/TBalancerGroup.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/TBalancer/TBalancerGroup.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,112 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.IO.Ports;
+using System.Threading;
+
+namespace OpenHardwareMonitor.Hardware.TBalancer {
+ public class TBalancerGroup : IGroup {
+
+ private List<TBalancer> hardware = new List<TBalancer>();
+
+ public TBalancerGroup() {
+
+ string[] portNames = SerialPort.GetPortNames();
+ for (int i = portNames.Length - 1; i >= 0; i--) {
+ try {
+ SerialPort serialPort =
+ new SerialPort(portNames[i], 19200, Parity.None, 8, StopBits.One);
+ serialPort.Open();
+ bool isValid = false;
+ if (serialPort.IsOpen && serialPort.CDHolding &&
+ serialPort.CtsHolding) {
+ serialPort.DiscardInBuffer();
+ serialPort.DiscardOutBuffer();
+ serialPort.Write(new byte[] { 0x38 }, 0, 1);
+ int j = 0;
+ while (serialPort.BytesToRead == 0 && j < 2) {
+ Thread.Sleep(100);
+ j++;
+ }
+ if (serialPort.BytesToRead > 0 &&
+ serialPort.ReadByte() == TBalancer.STARTFLAG)
+ {
+ while (serialPort.BytesToRead < 284 && j < 5) {
+ Thread.Sleep(100);
+ j++;
+ }
+ if (serialPort.BytesToRead == 284) {
+ int[] data = new int[285];
+ data[0] = TBalancer.STARTFLAG;
+ for (int k = 1; k < data.Length; k++)
+ data[k] = serialPort.ReadByte();
+
+ // check protocol version
+ isValid = (data[274] == TBalancer.PROTOCOL_VERSION);
+ }
+ }
+ }
+ serialPort.DiscardInBuffer();
+ serialPort.Close();
+ if (isValid) {
+ hardware.Add(new TBalancer(portNames[i]));
+ return;
+ }
+ } catch (IOException) { } catch (UnauthorizedAccessException) { }
+ catch (NullReferenceException) { }
+ }
+ }
+
+ public IHardware[] Hardware {
+ get {
+ return hardware.ToArray();
+ }
+ }
+
+ public string GetReport() {
+ return null;
+ }
+
+ public void Close() {
+ foreach (TBalancer tbalancer in hardware)
+ tbalancer.Close();
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Hardware/WinRing0.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Hardware/WinRing0.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,149 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public class WinRing0 {
+
+ public enum OlsDllStatus{
+ OLS_DLL_NO_ERROR = 0,
+ OLS_DLL_UNSUPPORTED_PLATFORM = 1,
+ OLS_DLL_DRIVER_NOT_LOADED = 2,
+ OLS_DLL_DRIVER_NOT_FOUND = 3,
+ OLS_DLL_DRIVER_UNLOADED = 4,
+ OLS_DLL_DRIVER_NOT_LOADED_ON_NETWORK = 5,
+ OLS_DLL_UNKNOWN_ERROR = 9
+ }
+
+ private static bool available = false;
+
+ private static string GetDllName() {
+ int p = (int)System.Environment.OSVersion.Platform;
+ if ((p == 4) || (p == 128)) {
+ if (IntPtr.Size == 4) {
+ return "libring0.so";
+ } else {
+ return "libring0x64.so";
+ }
+ } else {
+ if (IntPtr.Size == 4) {
+ return "WinRing0.dll";
+ } else {
+ return "WinRing0x64.dll";
+ }
+ }
+ }
+
+ private delegate bool InitializeOlsDelegate();
+ private delegate void DeinitializeOlsDelegate();
+
+ public delegate uint GetDllStatusDelegate();
+ public delegate bool IsCpuidDelegate();
+ public delegate bool CpuidDelegate(uint index, out uint eax, out uint ebx,
+ out uint ecx, out uint edx);
+ public delegate bool RdmsrPxDelegate(uint index, ref uint eax, ref uint edx,
+ UIntPtr processAffinityMask);
+ public delegate byte ReadIoPortByteDelegate(ushort port);
+ public delegate void WriteIoPortByteDelegate(ushort port, byte value);
+ public delegate void SetPciMaxBusIndexDelegate(byte max);
+ public delegate uint FindPciDeviceByIdDelegate(ushort vendorId,
+ ushort deviceId, byte index);
+ public delegate bool ReadPciConfigDwordExDelegate(uint pciAddress,
+ uint regAddress, out uint value);
+
+ private static InitializeOlsDelegate InitializeOls;
+ private static DeinitializeOlsDelegate DeinitializeOls;
+
+ public static GetDllStatusDelegate GetDllStatus;
+ public static IsCpuidDelegate IsCpuid;
+ public static CpuidDelegate Cpuid;
+ public static RdmsrPxDelegate RdmsrPx;
+ public static ReadIoPortByteDelegate ReadIoPortByte;
+ public static WriteIoPortByteDelegate WriteIoPortByte;
+ public static SetPciMaxBusIndexDelegate SetPciMaxBusIndex;
+ public static FindPciDeviceByIdDelegate FindPciDeviceById;
+ public static ReadPciConfigDwordExDelegate ReadPciConfigDwordEx;
+
+ private static void GetDelegate<T>(string entryPoint, out T newDelegate)
+ where T : class
+ {
+ DllImportAttribute attribute = new DllImportAttribute(GetDllName());
+ attribute.CallingConvention = CallingConvention.Winapi;
+ attribute.PreserveSig = true;
+ attribute.EntryPoint = entryPoint;
+ attribute.CharSet = CharSet.Auto;
+ PInvokeDelegateFactory.CreateDelegate(attribute, out newDelegate);
+ }
+
+ static WinRing0() {
+ GetDelegate("InitializeOls", out InitializeOls);
+ GetDelegate("DeinitializeOls", out DeinitializeOls);
+ GetDelegate("GetDllStatus", out GetDllStatus);
+ GetDelegate("IsCpuid", out IsCpuid);
+ GetDelegate("Cpuid", out Cpuid);
+ GetDelegate("RdmsrPx", out RdmsrPx);
+ GetDelegate("ReadIoPortByte", out ReadIoPortByte);
+ GetDelegate("WriteIoPortByte", out WriteIoPortByte);
+ GetDelegate("SetPciMaxBusIndex", out SetPciMaxBusIndex);
+ GetDelegate("FindPciDeviceById", out FindPciDeviceById);
+ GetDelegate("ReadPciConfigDwordEx", out ReadPciConfigDwordEx);
+
+ try {
+ if (InitializeOls != null && InitializeOls())
+ available = true;
+ } catch (DllNotFoundException) { }
+ }
+
+ public static bool IsAvailable {
+ get { return available; }
+ }
+
+ private static Deinitializer deinitializer = new Deinitializer();
+ private class Deinitializer {
+ ~Deinitializer() {
+ if (available)
+ DeinitializeOls();
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Licenses/Aga.Controls.License.txt
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Licenses/Aga.Controls.License.txt Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,25 @@
+The BSD License
+
+Copyright (c) 2009, Andrey Gliznetsov (a.gliznetsov@gmail.com)
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided
+that the following conditions are met
+
+- Redistributions of source code must retain the above copyright notice, this list of conditions
+and the following disclaimer.
+- Redistributions in binary form must reproduce the above copyright notice, this list of conditions
+and the following disclaimer in the documentation andor other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 Licenses/OpenHardwareMonitor.License.txt
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Licenses/OpenHardwareMonitor.License.txt Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,470 @@
+ MOZILLA PUBLIC LICENSE
+ Version 1.1
+
+ ---------------
+
+1. Definitions.
+
+ 1.0.1. "Commercial Use" means distribution or otherwise making the
+ Covered Code available to a third party.
+
+ 1.1. "Contributor" means each entity that creates or contributes to
+ the creation of Modifications.
+
+ 1.2. "Contributor Version" means the combination of the Original
+ Code, prior Modifications used by a Contributor, and the Modifications
+ made by that particular Contributor.
+
+ 1.3. "Covered Code" means the Original Code or Modifications or the
+ combination of the Original Code and Modifications, in each case
+ including portions thereof.
+
+ 1.4. "Electronic Distribution Mechanism" means a mechanism generally
+ accepted in the software development community for the electronic
+ transfer of data.
+
+ 1.5. "Executable" means Covered Code in any form other than Source
+ Code.
+
+ 1.6. "Initial Developer" means the individual or entity identified
+ as the Initial Developer in the Source Code notice required by Exhibit
+ A.
+
+ 1.7. "Larger Work" means a work which combines Covered Code or
+ portions thereof with code not governed by the terms of this License.
+
+ 1.8. "License" means this document.
+
+ 1.8.1. "Licensable" means having the right to grant, to the maximum
+ extent possible, whether at the time of the initial grant or
+ subsequently acquired, any and all of the rights conveyed herein.
+
+ 1.9. "Modifications" means any addition to or deletion from the
+ substance or structure of either the Original Code or any previous
+ Modifications. When Covered Code is released as a series of files, a
+ Modification is:
+ A. Any addition to or deletion from the contents of a file
+ containing Original Code or previous Modifications.
+
+ B. Any new file that contains any part of the Original Code or
+ previous Modifications.
+
+ 1.10. "Original Code" means Source Code of computer software code
+ which is described in the Source Code notice required by Exhibit A as
+ Original Code, and which, at the time of its release under this
+ License is not already Covered Code governed by this License.
+
+ 1.10.1. "Patent Claims" means any patent claim(s), now owned or
+ hereafter acquired, including without limitation, method, process,
+ and apparatus claims, in any patent Licensable by grantor.
+
+ 1.11. "Source Code" means the preferred form of the Covered Code for
+ making modifications to it, including all modules it contains, plus
+ any associated interface definition files, scripts used to control
+ compilation and installation of an Executable, or source code
+ differential comparisons against either the Original Code or another
+ well known, available Covered Code of the Contributor's choice. The
+ Source Code can be in a compressed or archival form, provided the
+ appropriate decompression or de-archiving software is widely available
+ for no charge.
+
+ 1.12. "You" (or "Your") means an individual or a legal entity
+ exercising rights under, and complying with all of the terms of, this
+ License or a future version of this License issued under Section 6.1.
+ For legal entities, "You" includes any entity which controls, is
+ controlled by, or is under common control with You. For purposes of
+ this definition, "control" means (a) the power, direct or indirect,
+ to cause the direction or management of such entity, whether by
+ contract or otherwise, or (b) ownership of more than fifty percent
+ (50%) of the outstanding shares or beneficial ownership of such
+ entity.
+
+2. Source Code License.
+
+ 2.1. The Initial Developer Grant.
+ The Initial Developer hereby grants You a world-wide, royalty-free,
+ non-exclusive license, subject to third party intellectual property
+ claims:
+ (a) under intellectual property rights (other than patent or
+ trademark) Licensable by Initial Developer to use, reproduce,
+ modify, display, perform, sublicense and distribute the Original
+ Code (or portions thereof) with or without Modifications, and/or
+ as part of a Larger Work; and
+
+ (b) under Patents Claims infringed by the making, using or
+ selling of Original Code, to make, have made, use, practice,
+ sell, and offer for sale, and/or otherwise dispose of the
+ Original Code (or portions thereof).
+
+ (c) the licenses granted in this Section 2.1(a) and (b) are
+ effective on the date Initial Developer first distributes
+ Original Code under the terms of this License.
+
+ (d) Notwithstanding Section 2.1(b) above, no patent license is
+ granted: 1) for code that You delete from the Original Code; 2)
+ separate from the Original Code; or 3) for infringements caused
+ by: i) the modification of the Original Code or ii) the
+ combination of the Original Code with other software or devices.
+
+ 2.2. Contributor Grant.
+ Subject to third party intellectual property claims, each Contributor
+ hereby grants You a world-wide, royalty-free, non-exclusive license
+
+ (a) under intellectual property rights (other than patent or
+ trademark) Licensable by Contributor, to use, reproduce, modify,
+ display, perform, sublicense and distribute the Modifications
+ created by such Contributor (or portions thereof) either on an
+ unmodified basis, with other Modifications, as Covered Code
+ and/or as part of a Larger Work; and
+
+ (b) under Patent Claims infringed by the making, using, or
+ selling of Modifications made by that Contributor either alone
+ and/or in combination with its Contributor Version (or portions
+ of such combination), to make, use, sell, offer for sale, have
+ made, and/or otherwise dispose of: 1) Modifications made by that
+ Contributor (or portions thereof); and 2) the combination of
+ Modifications made by that Contributor with its Contributor
+ Version (or portions of such combination).
+
+ (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
+ effective on the date Contributor first makes Commercial Use of
+ the Covered Code.
+
+ (d) Notwithstanding Section 2.2(b) above, no patent license is
+ granted: 1) for any code that Contributor has deleted from the
+ Contributor Version; 2) separate from the Contributor Version;
+ 3) for infringements caused by: i) third party modifications of
+ Contributor Version or ii) the combination of Modifications made
+ by that Contributor with other software (except as part of the
+ Contributor Version) or other devices; or 4) under Patent Claims
+ infringed by Covered Code in the absence of Modifications made by
+ that Contributor.
+
+3. Distribution Obligations.
+
+ 3.1. Application of License.
+ The Modifications which You create or to which You contribute are
+ governed by the terms of this License, including without limitation
+ Section 2.2. The Source Code version of Covered Code may be
+ distributed only under the terms of this License or a future version
+ of this License released under Section 6.1, and You must include a
+ copy of this License with every copy of the Source Code You
+ distribute. You may not offer or impose any terms on any Source Code
+ version that alters or restricts the applicable version of this
+ License or the recipients' rights hereunder. However, You may include
+ an additional document offering the additional rights described in
+ Section 3.5.
+
+ 3.2. Availability of Source Code.
+ Any Modification which You create or to which You contribute must be
+ made available in Source Code form under the terms of this License
+ either on the same media as an Executable version or via an accepted
+ Electronic Distribution Mechanism to anyone to whom you made an
+ Executable version available; and if made available via Electronic
+ Distribution Mechanism, must remain available for at least twelve (12)
+ months after the date it initially became available, or at least six
+ (6) months after a subsequent version of that particular Modification
+ has been made available to such recipients. You are responsible for
+ ensuring that the Source Code version remains available even if the
+ Electronic Distribution Mechanism is maintained by a third party.
+
+ 3.3. Description of Modifications.
+ You must cause all Covered Code to which You contribute to contain a
+ file documenting the changes You made to create that Covered Code and
+ the date of any change. You must include a prominent statement that
+ the Modification is derived, directly or indirectly, from Original
+ Code provided by the Initial Developer and including the name of the
+ Initial Developer in (a) the Source Code, and (b) in any notice in an
+ Executable version or related documentation in which You describe the
+ origin or ownership of the Covered Code.
+
+ 3.4. Intellectual Property Matters
+ (a) Third Party Claims.
+ If Contributor has knowledge that a license under a third party's
+ intellectual property rights is required to exercise the rights
+ granted by such Contributor under Sections 2.1 or 2.2,
+ Contributor must include a text file with the Source Code
+ distribution titled "LEGAL" which describes the claim and the
+ party making the claim in sufficient detail that a recipient will
+ know whom to contact. If Contributor obtains such knowledge after
+ the Modification is made available as described in Section 3.2,
+ Contributor shall promptly modify the LEGAL file in all copies
+ Contributor makes available thereafter and shall take other steps
+ (such as notifying appropriate mailing lists or newsgroups)
+ reasonably calculated to inform those who received the Covered
+ Code that new knowledge has been obtained.
+
+ (b) Contributor APIs.
+ If Contributor's Modifications include an application programming
+ interface and Contributor has knowledge of patent licenses which
+ are reasonably necessary to implement that API, Contributor must
+ also include this information in the LEGAL file.
+
+ (c) Representations.
+ Contributor represents that, except as disclosed pursuant to
+ Section 3.4(a) above, Contributor believes that Contributor's
+ Modifications are Contributor's original creation(s) and/or
+ Contributor has sufficient rights to grant the rights conveyed by
+ this License.
+
+ 3.5. Required Notices.
+ You must duplicate the notice in Exhibit A in each file of the Source
+ Code. If it is not possible to put such notice in a particular Source
+ Code file due to its structure, then You must include such notice in a
+ location (such as a relevant directory) where a user would be likely
+ to look for such a notice. If You created one or more Modification(s)
+ You may add your name as a Contributor to the notice described in
+ Exhibit A. You must also duplicate this License in any documentation
+ for the Source Code where You describe recipients' rights or ownership
+ rights relating to Covered Code. You may choose to offer, and to
+ charge a fee for, warranty, support, indemnity or liability
+ obligations to one or more recipients of Covered Code. However, You
+ may do so only on Your own behalf, and not on behalf of the Initial
+ Developer or any Contributor. You must make it absolutely clear than
+ any such warranty, support, indemnity or liability obligation is
+ offered by You alone, and You hereby agree to indemnify the Initial
+ Developer and every Contributor for any liability incurred by the
+ Initial Developer or such Contributor as a result of warranty,
+ support, indemnity or liability terms You offer.
+
+ 3.6. Distribution of Executable Versions.
+ You may distribute Covered Code in Executable form only if the
+ requirements of Section 3.1-3.5 have been met for that Covered Code,
+ and if You include a notice stating that the Source Code version of
+ the Covered Code is available under the terms of this License,
+ including a description of how and where You have fulfilled the
+ obligations of Section 3.2. The notice must be conspicuously included
+ in any notice in an Executable version, related documentation or
+ collateral in which You describe recipients' rights relating to the
+ Covered Code. You may distribute the Executable version of Covered
+ Code or ownership rights under a license of Your choice, which may
+ contain terms different from this License, provided that You are in
+ compliance with the terms of this License and that the license for the
+ Executable version does not attempt to limit or alter the recipient's
+ rights in the Source Code version from the rights set forth in this
+ License. If You distribute the Executable version under a different
+ license You must make it absolutely clear that any terms which differ
+ from this License are offered by You alone, not by the Initial
+ Developer or any Contributor. You hereby agree to indemnify the
+ Initial Developer and every Contributor for any liability incurred by
+ the Initial Developer or such Contributor as a result of any such
+ terms You offer.
+
+ 3.7. Larger Works.
+ You may create a Larger Work by combining Covered Code with other code
+ not governed by the terms of this License and distribute the Larger
+ Work as a single product. In such a case, You must make sure the
+ requirements of this License are fulfilled for the Covered Code.
+
+4. Inability to Comply Due to Statute or Regulation.
+
+ If it is impossible for You to comply with any of the terms of this
+ License with respect to some or all of the Covered Code due to
+ statute, judicial order, or regulation then You must: (a) comply with
+ the terms of this License to the maximum extent possible; and (b)
+ describe the limitations and the code they affect. Such description
+ must be included in the LEGAL file described in Section 3.4 and must
+ be included with all distributions of the Source Code. Except to the
+ extent prohibited by statute or regulation, such description must be
+ sufficiently detailed for a recipient of ordinary skill to be able to
+ understand it.
+
+5. Application of this License.
+
+ This License applies to code to which the Initial Developer has
+ attached the notice in Exhibit A and to related Covered Code.
+
+6. Versions of the License.
+
+ 6.1. New Versions.
+ Netscape Communications Corporation ("Netscape") may publish revised
+ and/or new versions of the License from time to time. Each version
+ will be given a distinguishing version number.
+
+ 6.2. Effect of New Versions.
+ Once Covered Code has been published under a particular version of the
+ License, You may always continue to use it under the terms of that
+ version. You may also choose to use such Covered Code under the terms
+ of any subsequent version of the License published by Netscape. No one
+ other than Netscape has the right to modify the terms applicable to
+ Covered Code created under this License.
+
+ 6.3. Derivative Works.
+ If You create or use a modified version of this License (which you may
+ only do in order to apply it to code which is not already Covered Code
+ governed by this License), You must (a) rename Your license so that
+ the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
+ "MPL", "NPL" or any confusingly similar phrase do not appear in your
+ license (except to note that your license differs from this License)
+ and (b) otherwise make it clear that Your version of the license
+ contains terms which differ from the Mozilla Public License and
+ Netscape Public License. (Filling in the name of the Initial
+ Developer, Original Code or Contributor in the notice described in
+ Exhibit A shall not of themselves be deemed to be modifications of
+ this License.)
+
+7. DISCLAIMER OF WARRANTY.
+
+ COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+ WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
+ DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
+ THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
+ IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
+ YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
+ COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
+ OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
+ ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
+
+8. TERMINATION.
+
+ 8.1. This License and the rights granted hereunder will terminate
+ automatically if You fail to comply with terms herein and fail to cure
+ such breach within 30 days of becoming aware of the breach. All
+ sublicenses to the Covered Code which are properly granted shall
+ survive any termination of this License. Provisions which, by their
+ nature, must remain in effect beyond the termination of this License
+ shall survive.
+
+ 8.2. If You initiate litigation by asserting a patent infringement
+ claim (excluding declatory judgment actions) against Initial Developer
+ or a Contributor (the Initial Developer or Contributor against whom
+ You file such action is referred to as "Participant") alleging that:
+
+ (a) such Participant's Contributor Version directly or indirectly
+ infringes any patent, then any and all rights granted by such
+ Participant to You under Sections 2.1 and/or 2.2 of this License
+ shall, upon 60 days notice from Participant terminate prospectively,
+ unless if within 60 days after receipt of notice You either: (i)
+ agree in writing to pay Participant a mutually agreeable reasonable
+ royalty for Your past and future use of Modifications made by such
+ Participant, or (ii) withdraw Your litigation claim with respect to
+ the Contributor Version against such Participant. If within 60 days
+ of notice, a reasonable royalty and payment arrangement are not
+ mutually agreed upon in writing by the parties or the litigation claim
+ is not withdrawn, the rights granted by Participant to You under
+ Sections 2.1 and/or 2.2 automatically terminate at the expiration of
+ the 60 day notice period specified above.
+
+ (b) any software, hardware, or device, other than such Participant's
+ Contributor Version, directly or indirectly infringes any patent, then
+ any rights granted to You by such Participant under Sections 2.1(b)
+ and 2.2(b) are revoked effective as of the date You first made, used,
+ sold, distributed, or had made, Modifications made by that
+ Participant.
+
+ 8.3. If You assert a patent infringement claim against Participant
+ alleging that such Participant's Contributor Version directly or
+ indirectly infringes any patent where such claim is resolved (such as
+ by license or settlement) prior to the initiation of patent
+ infringement litigation, then the reasonable value of the licenses
+ granted by such Participant under Sections 2.1 or 2.2 shall be taken
+ into account in determining the amount or value of any payment or
+ license.
+
+ 8.4. In the event of termination under Sections 8.1 or 8.2 above,
+ all end user license agreements (excluding distributors and resellers)
+ which have been validly granted by You or any distributor hereunder
+ prior to termination shall survive termination.
+
+9. LIMITATION OF LIABILITY.
+
+ UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
+ (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
+ DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
+ OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
+ ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
+ CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
+ WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
+ COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
+ INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
+ LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
+ RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
+ PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
+ EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
+ THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
+
+10. U.S. GOVERNMENT END USERS.
+
+ The Covered Code is a "commercial item," as that term is defined in
+ 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
+ software" and "commercial computer software documentation," as such
+ terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
+ C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
+ all U.S. Government End Users acquire Covered Code with only those
+ rights set forth herein.
+
+11. MISCELLANEOUS.
+
+ This License represents the complete agreement concerning subject
+ matter hereof. If any provision of this License is held to be
+ unenforceable, such provision shall be reformed only to the extent
+ necessary to make it enforceable. This License shall be governed by
+ California law provisions (except to the extent applicable law, if
+ any, provides otherwise), excluding its conflict-of-law provisions.
+ With respect to disputes in which at least one party is a citizen of,
+ or an entity chartered or registered to do business in the United
+ States of America, any litigation relating to this License shall be
+ subject to the jurisdiction of the Federal Courts of the Northern
+ District of California, with venue lying in Santa Clara County,
+ California, with the losing party responsible for costs, including
+ without limitation, court costs and reasonable attorneys' fees and
+ expenses. The application of the United Nations Convention on
+ Contracts for the International Sale of Goods is expressly excluded.
+ Any law or regulation which provides that the language of a contract
+ shall be construed against the drafter shall not apply to this
+ License.
+
+12. RESPONSIBILITY FOR CLAIMS.
+
+ As between Initial Developer and the Contributors, each party is
+ responsible for claims and damages arising, directly or indirectly,
+ out of its utilization of rights under this License and You agree to
+ work with Initial Developer and Contributors to distribute such
+ responsibility on an equitable basis. Nothing herein is intended or
+ shall be deemed to constitute any admission of liability.
+
+13. MULTIPLE-LICENSED CODE.
+
+ Initial Developer may designate portions of the Covered Code as
+ "Multiple-Licensed". "Multiple-Licensed" means that the Initial
+ Developer permits you to utilize portions of the Covered Code under
+ Your choice of the NPL or the alternative licenses, if any, specified
+ by the Initial Developer in the file described in Exhibit A.
+
+EXHIBIT A -Mozilla Public License.
+
+ ``The contents of this file are subject to the Mozilla Public License
+ Version 1.1 (the "License"); you may not use this file except in
+ compliance with the License. You may obtain a copy of the License at
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS"
+ basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ License for the specific language governing rights and limitations
+ under the License.
+
+ The Original Code is ______________________________________.
+
+ The Initial Developer of the Original Code is ________________________.
+ Portions created by ______________________ are Copyright (C) ______
+ _______________________. All Rights Reserved.
+
+ Contributor(s): ______________________________________.
+
+ Alternatively, the contents of this file may be used under the terms
+ of the _____ license (the "[___] License"), in which case the
+ provisions of [______] License are applicable instead of those
+ above. If you wish to allow use of your version of this file only
+ under the terms of the [____] License and not to allow others to use
+ your version of this file under the MPL, indicate your decision by
+ deleting the provisions above and replace them with the notice and
+ other provisions required by the [___] License. If you do not delete
+ the provisions above, a recipient may use your version of this file
+ under either the MPL or the [___] License."
+
+ [NOTE: The text of this Exhibit A may differ slightly from the text of
+ the notices in the Source Code files of the Original Code. You should
+ use the text of this Exhibit A rather than the text found in the
+ Original Code Source Code for Your Modifications.]
+
diff -r 77e062628ef5 -r 361e324a0ed4 Licenses/WinRing0.License.txt
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Licenses/WinRing0.License.txt Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,21 @@
+Copyright (c) 2007-2009 OpenLibSys.org. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff -r 77e062628ef5 -r 361e324a0ed4 OpenHardwareMonitor.csproj
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/OpenHardwareMonitor.csproj Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,148 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="3.5">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+ <ProjectGuid>{F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}</ProjectGuid>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <OutputType>WinExe</OutputType>
+ <NoStandardLibraries>false</NoStandardLibraries>
+ <AssemblyName>OpenHardwareMonitor</AssemblyName>
+ <TargetFrameworkVersion>v2.0</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ <RootNamespace>OpenHardwareMonitor</RootNamespace>
+ <ApplicationIcon>Resources\icon.ico</ApplicationIcon>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+ <DebugSymbols>true</DebugSymbols>
+ <DebugType>full</DebugType>
+ <Optimize>false</Optimize>
+ <OutputPath>Bin\Debug\</OutputPath>
+ <DefineConstants>TRACE;DEBUG</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ <UseVSHostingProcess>false</UseVSHostingProcess>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+ <DebugType>none</DebugType>
+ <Optimize>true</Optimize>
+ <OutputPath>Bin\Release\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ <UseVSHostingProcess>false</UseVSHostingProcess>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Merge|AnyCPU' ">
+ <OutputPath>bin\Merge\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <PlatformTarget>AnyCPU</PlatformTarget>
+ <UseVSHostingProcess>false</UseVSHostingProcess>
+ <ErrorReport>prompt</ErrorReport>
+ <OutputType>Module</OutputType>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="Aga.Controls, Version=1.7.0.0, Culture=neutral, PublicKeyToken=fcc90fbf924463a3, processorArchitecture=MSIL">
+ <SpecificVersion>False</SpecificVersion>
+ <HintPath>External\Aga.Controls.dll</HintPath>
+ </Reference>
+ <Reference Include="System" />
+ <Reference Include="System.Configuration" />
+ <Reference Include="System.Data" />
+ <Reference Include="System.Drawing" />
+ <Reference Include="System.Management" />
+ <Reference Include="System.Windows.Forms" />
+ <Reference Include="System.Xml" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="GUI\TypeNode.cs" />
+ <Compile Include="Hardware\CPU\AMD10CPU.cs" />
+ <Compile Include="Hardware\HDD\HDD.cs" />
+ <Compile Include="Hardware\HDD\HDDGroup.cs" />
+ <Compile Include="Hardware\HDD\SMART.cs" />
+ <Compile Include="Hardware\LPC\Chip.cs" />
+ <Compile Include="Hardware\SMBIOS\SMBIOSGroup.cs" />
+ <Compile Include="Hardware\LPC\W83627DHG.cs" />
+ <Compile Include="Hardware\ReportWriter.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ <Compile Include="GUI\AboutBox.cs">
+ <SubType>Form</SubType>
+ </Compile>
+ <Compile Include="GUI\AboutBox.Designer.cs">
+ <DependentUpon>AboutBox.cs</DependentUpon>
+ </Compile>
+ <Compile Include="Hardware\ATI\ADL.cs" />
+ <Compile Include="Hardware\ATI\ATIGroup.cs" />
+ <Compile Include="Hardware\ATI\ATIGPU.cs" />
+ <Compile Include="Utilities\Configuration.cs" />
+ <Compile Include="Utilities\CrashReport.cs" />
+ <Compile Include="Utilities\EmbeddedResources.cs" />
+ <Compile Include="GUI\HardwareNode.cs" />
+ <Compile Include="Hardware\IGroup.cs" />
+ <Compile Include="Hardware\IHardware.cs" />
+ <Compile Include="Hardware\ISensor.cs" />
+ <Compile Include="Hardware\LPC\IT87.cs" />
+ <Compile Include="Hardware\LPC\LPCGroup.cs" />
+ <Compile Include="GUI\MainForm.cs">
+ <SubType>Form</SubType>
+ </Compile>
+ <Compile Include="GUI\MainForm.Designer.cs">
+ <DependentUpon>MainForm.cs</DependentUpon>
+ </Compile>
+ <Compile Include="Hardware\Nvidia\NVAPI.cs" />
+ <Compile Include="Hardware\Nvidia\NvidiaGPU.cs" />
+ <Compile Include="Hardware\Nvidia\NvidiaGroup.cs" />
+ <Compile Include="Utilities\PInvokeDelegateFactory.cs" />
+ <Compile Include="GUI\PlotPanel.cs">
+ <SubType>UserControl</SubType>
+ </Compile>
+ <Compile Include="GUI\PlotPanel.Designer.cs">
+ <DependentUpon>PlotPanel.cs</DependentUpon>
+ </Compile>
+ <Compile Include="Program.cs" />
+ <Compile Include="Hardware\CPU\IntelCPU.cs" />
+ <Compile Include="Hardware\CPU\CPUGroup.cs" />
+ <Compile Include="Hardware\Sensor.cs" />
+ <Compile Include="GUI\SensorNode.cs" />
+ <Compile Include="Hardware\TBalancer\TBalancer.cs" />
+ <Compile Include="Hardware\TBalancer\TBalancerGroup.cs" />
+ <Compile Include="Hardware\WinRing0.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <EmbeddedResource Include="GUI\AboutBox.resx">
+ <DependentUpon>AboutBox.cs</DependentUpon>
+ </EmbeddedResource>
+ <EmbeddedResource Include="GUI\MainForm.resx">
+ <DependentUpon>MainForm.cs</DependentUpon>
+ </EmbeddedResource>
+ <EmbeddedResource Include="GUI\PlotPanel.resx">
+ <DependentUpon>PlotPanel.cs</DependentUpon>
+ </EmbeddedResource>
+ <EmbeddedResource Include="Resources\ati.png">
+ </EmbeddedResource>
+ <EmbeddedResource Include="Resources\bigng.png" />
+ <EmbeddedResource Include="Resources\clock.png" />
+ <EmbeddedResource Include="Resources\computer.png" />
+ <EmbeddedResource Include="Resources\cpu.png" />
+ <EmbeddedResource Include="Resources\fan.png" />
+ <EmbeddedResource Include="Resources\temperature.png" />
+ </ItemGroup>
+ <ItemGroup>
+ <EmbeddedResource Include="Resources\chip.png" />
+ <EmbeddedResource Include="Resources\hdd.png" />
+ <Content Include="Resources\icon.ico" />
+ <EmbeddedResource Include="Resources\voltage.png" />
+ <EmbeddedResource Include="Resources\nvidia.png" />
+ </ItemGroup>
+ <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+ <ProjectExtensions>
+ <VisualStudio AllowExistingFolder="true" />
+ </ProjectExtensions>
+ <PropertyGroup>
+ <PreBuildEvent>
+ </PreBuildEvent>
+ <PostBuildEvent>copy "$(ProjectDir)External\*.*" "$(TargetDir)"
+copy "$(ProjectDir)Licenses\*.*" "$(TargetDir)"</PostBuildEvent>
+ </PropertyGroup>
+</Project>
\ No newline at end of file
diff -r 77e062628ef5 -r 361e324a0ed4 OpenHardwareMonitor.sln
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/OpenHardwareMonitor.sln Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,41 @@
+
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual Studio 2008
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "OpenHardwareMonitor", "OpenHardwareMonitor.csproj", "{F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Any CPU = Debug|Any CPU
+ Release|Any CPU = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+ {F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}.Debug|Any CPU.Build.0 = Debug|Any CPU
+ {F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}.Release|Any CPU.ActiveCfg = Release|Any CPU
+ {F5E0C1F7-9E9B-46F2-AC88-8C9C1C923880}.Release|Any CPU.Build.0 = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+ GlobalSection(MonoDevelopProperties) = preSolution
+ StartupItem = OpenHardwareMonitor.csproj
+ Policies = $0
+ $0.DotNetNamingPolicy = $1
+ $1.DirectoryNamespaceAssociation = None
+ $1.ResourceNamePolicy = FileFormatDefault
+ $0.TextStylePolicy = $2
+ $2.FileWidth = 120
+ $2.TabWidth = 2
+ $2.NoTabsAfterNonTabs = True
+ $2.inheritsSet = VisualStudio
+ $2.inheritsScope = text/plain
+ $2.scope = text/plain
+ $0.TextStylePolicy = $3
+ $3.inheritsSet = null
+ $3.scope = text/x-csharp
+ $0.CSharpFormattingPolicy = $4
+ $4.inheritsSet = Mono
+ $4.inheritsScope = text/x-csharp
+ $4.scope = text/x-csharp
+ EndGlobalSection
+EndGlobal
diff -r 77e062628ef5 -r 361e324a0ed4 Program.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Program.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,62 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Windows.Forms;
+
+
+namespace OpenHardwareMonitor {
+ static class Program {
+ /// <summary>
+ /// The main entry point for the application.
+ /// </summary>
+ [STAThread]
+ static void Main() {
+ #if !DEBUG
+ try {
+ #endif
+ Application.EnableVisualStyles();
+ Application.SetCompatibleTextRenderingDefault(false);
+ Application.Run(new GUI.MainForm());
+ #if !DEBUG
+ } catch (Exception e) {
+ Utilities.CrashReport.Save(e);
+ }
+ #endif
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Properties/AssemblyInfo.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Properties/AssemblyInfo.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Open Hardware Monitor")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Open Hardware Monitor")]
+[assembly: AssemblyCopyright("Copyright © 2009-2010 Michael Möller")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("f7a1c873-0bec-4762-8707-2edce3a6444d")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("0.1.0.0")]
+[assembly: AssemblyFileVersion("0.1.0.0")]
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/ati.png
Binary file Resources/ati.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/bigng.png
Binary file Resources/bigng.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/chip.png
Binary file Resources/chip.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/clock.png
Binary file Resources/clock.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/computer.png
Binary file Resources/computer.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/cpu.png
Binary file Resources/cpu.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/fan.png
Binary file Resources/fan.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/hdd.png
Binary file Resources/hdd.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/icon.ico
Binary file Resources/icon.ico has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/icon.xcf
Binary file Resources/icon.xcf has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/nvidia.png
Binary file Resources/nvidia.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/temperature.png
Binary file Resources/temperature.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Resources/voltage.png
Binary file Resources/voltage.png has changed
diff -r 77e062628ef5 -r 361e324a0ed4 Utilities/Configuration.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Utilities/Configuration.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,133 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.IO;
+
+namespace OpenHardwareMonitor.Utilities {
+
+ public sealed class Config {
+ private static readonly Config instance = new Config();
+
+ private string fileName;
+
+ private System.Configuration.Configuration config;
+
+ private Config() {
+ this.fileName = Path.ChangeExtension(
+ System.Windows.Forms.Application.ExecutablePath, ".config");
+ System.Configuration.ExeConfigurationFileMap fileMap =
+ new System.Configuration.ExeConfigurationFileMap();
+ fileMap.ExeConfigFilename = fileName;
+ config = System.Configuration.ConfigurationManager.
+ OpenMappedExeConfiguration(fileMap,
+ System.Configuration.ConfigurationUserLevel.None);
+ }
+
+ ~Config() {
+ string tempName = Path.ChangeExtension(fileName, ".tmp");
+
+ if (File.Exists(tempName))
+ File.Delete(tempName);
+ try {
+ config.SaveAs(tempName);
+ if (File.Exists(fileName) && File.Exists(tempName))
+ File.Delete(fileName);
+ File.Move(tempName, fileName);
+ } catch (System.Configuration.ConfigurationErrorsException) { }
+ }
+
+ public static Config Settings {
+ get {
+ return instance;
+ }
+ }
+
+ public string this[string name] {
+ get {
+ System.Configuration.KeyValueConfigurationElement element =
+ config.AppSettings.Settings[name];
+ if (element != null)
+ return element.Value;
+ else
+ return null;
+ }
+ set {
+ config.AppSettings.Settings.Remove(name);
+ config.AppSettings.Settings.Add(name, value);
+ }
+ }
+
+ public static bool Contains(string name) {
+ System.Configuration.KeyValueConfigurationElement element =
+ instance.config.AppSettings.Settings[name];
+ return element != null;
+ }
+
+ public static void Set(string name, bool value) {
+ instance[name] = value ? "true" : "false";
+ }
+
+ public static bool Get(string name, bool value) {
+ System.Configuration.KeyValueConfigurationElement element =
+ instance.config.AppSettings.Settings[name];
+ if (element == null)
+ return value;
+ else
+ return element.Value == "true";
+ }
+
+ public static void Set(string name, int value) {
+ instance[name] = value.ToString();
+ }
+
+ public static int Get(string name, int value) {
+ System.Configuration.KeyValueConfigurationElement element =
+ instance.config.AppSettings.Settings[name];
+ if (element == null)
+ return value;
+ else {
+ int parsedValue;
+ if (int.TryParse(element.Value, out parsedValue))
+ return parsedValue;
+ else
+ return value;
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Utilities/CrashReport.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Utilities/CrashReport.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,58 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Text;
+
+namespace OpenHardwareMonitor.Utilities {
+ public class CrashReport {
+
+ public static void Save(Exception e) {
+ using (TextWriter w =
+ new StreamWriter("OpenHardwareMonitor.Crash.txt")) {
+ w.WriteLine(e.ToString());
+ w.WriteLine();
+ if (e.InnerException != null) {
+ w.WriteLine(e.InnerException.ToString());
+ w.WriteLine();
+ }
+ }
+ }
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Utilities/EmbeddedResources.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Utilities/EmbeddedResources.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,61 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Reflection;
+
+namespace OpenHardwareMonitor.Utilities {
+ public class EmbeddedResources {
+
+ public static Image GetImage(string name) {
+ name = "OpenHardwareMonitor.Resources." + name;
+
+ string[] names =
+ Assembly.GetExecutingAssembly().GetManifestResourceNames();
+ for (int i = 0; i < names.Length; i++) {
+ if (names[i].Replace('\\', '.') == name)
+ return new Bitmap(Assembly.GetExecutingAssembly().
+ GetManifestResourceStream(names[i]));
+ }
+
+ return new Bitmap(1, 1);
+ }
+
+ }
+}
diff -r 77e062628ef5 -r 361e324a0ed4 Utilities/PInvokeDelegateFactory.cs
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Utilities/PInvokeDelegateFactory.cs Tue Jan 26 22:37:48 2010 +0000
@@ -0,0 +1,118 @@
+/*
+
+ Version: MPL 1.1/GPL 2.0/LGPL 2.1
+
+ The contents of this file are subject to the Mozilla Public License Version
+ 1.1 (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS" basis,
+ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ for the specific language governing rights and limitations under the License.
+
+ The Original Code is the Open Hardware Monitor code.
+
+ The Initial Developer of the Original Code is
+ Michael Möller <m.moeller@gmx.ch>.
+ Portions created by the Initial Developer are Copyright (C) 2009-2010
+ the Initial Developer. All Rights Reserved.
+
+ Contributor(s):
+
+ Alternatively, the contents of this file may be used under the terms of
+ either the GNU General Public License Version 2 or later (the "GPL"), or
+ the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ in which case the provisions of the GPL or the LGPL are applicable instead
+ of those above. If you wish to allow use of your version of this file only
+ under the terms of either the GPL or the LGPL, and not to allow others to
+ use your version of this file under the terms of the MPL, indicate your
+ decision by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL or the LGPL. If you do not delete
+ the provisions above, a recipient may use your version of this file under
+ the terms of any one of the MPL, the GPL or the LGPL.
+
+*/
+
+using System;
+using System.Collections.Generic;
+using System.Reflection;
+using System.Reflection.Emit;
+using System.Runtime.InteropServices;
+
+namespace OpenHardwareMonitor.Hardware {
+
+ public sealed class PInvokeDelegateFactory {
+
+ private static AssemblyBuilder assemblyBuilder;
+ private static ModuleBuilder moduleBuilder;
+
+ private static IDictionary<DllImportAttribute, Type> wrapperTypes =
+ new Dictionary<DllImportAttribute, Type>();
+
+ static PInvokeDelegateFactory() {
+
+ AssemblyName assemblyName = new AssemblyName();
+ assemblyName.Name = "PInvokeDelegateFactoryInternalAssembly";
+
+ assemblyBuilder =
+ AppDomain.CurrentDomain.DefineDynamicAssembly(assemblyName,
+ AssemblyBuilderAccess.Run);
+
+ moduleBuilder = assemblyBuilder.DefineDynamicModule(
+ "PInvokeDelegateFactoryInternalModule");
+ }
+
+ private PInvokeDelegateFactory() { }
+
+ public static void CreateDelegate<T>(DllImportAttribute dllImportAttribute,
+ out T newDelegate) where T : class
+ {
+ Type wrapperType;
+ wrapperTypes.TryGetValue(dllImportAttribute, out wrapperType);
+
+ if (wrapperType == null) {
+ wrapperType = CreateWrapperType(typeof(T), dllImportAttribute);
+ wrapperTypes.Add(dllImportAttribute, wrapperType);
+ }
+
+ newDelegate = Delegate.CreateDelegate(typeof(T), wrapperType,
+ dllImportAttribute.EntryPoint) as T;
+ }
+
+
+ private static Type CreateWrapperType(Type delegateType,
+ DllImportAttribute dllImportAttribute) {
+
+ TypeBuilder typeBuilder = moduleBuilder.DefineType(
+ "PInvokeDelegateFactoryInternalWrapperType" + wrapperTypes.Count);
+
+ MethodInfo methodInfo = delegateType.GetMethod("Invoke");
+
+ ParameterInfo[] parameterInfos = methodInfo.GetParameters();
+ int parameterCount = parameterInfos.GetLength(0);
+
+ Type[] parameterTypes = new Type[parameterCount];
+ for (int i = 0; i < parameterCount; i++)
+ parameterTypes[i] = parameterInfos[i].ParameterType;
+
+ MethodBuilder methodBuilder = typeBuilder.DefinePInvokeMethod(
+ dllImportAttribute.EntryPoint, dllImportAttribute.Value,
+ MethodAttributes.Public | MethodAttributes.Static |
+ MethodAttributes.PinvokeImpl, CallingConventions.Standard,
+ methodInfo.ReturnType, parameterTypes,
+ dllImportAttribute.CallingConvention,
+ dllImportAttribute.CharSet);
+
+ foreach (ParameterInfo parameterInfo in parameterInfos)
+ methodBuilder.DefineParameter(parameterInfo.Position + 1,
+ parameterInfo.Attributes, parameterInfo.Name);
+
+ if (dllImportAttribute.PreserveSig)
+ methodBuilder.SetImplementationFlags(MethodImplAttributes.PreserveSig);
+
+ return typeBuilder.CreateType();
+ }
+ }
+}