diff -r 800a36a1ca8e -r dc276daadb2c Hardware/LPC/Winbond.cs
--- a/Hardware/LPC/Winbond.cs	Sun Feb 07 20:59:13 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,132 +0,0 @@
-/*
-  
-  Version: MPL 1.1/GPL 2.0/LGPL 2.1
-
-  The contents of this file are subject to the Mozilla Public License Version
-  1.1 (the "License"); you may not use this file except in compliance with
-  the License. You may obtain a copy of the License at
- 
-  http://www.mozilla.org/MPL/
-
-  Software distributed under the License is distributed on an "AS IS" basis,
-  WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-  for the specific language governing rights and limitations under the License.
-
-  The Original Code is the Open Hardware Monitor code.
-
-  The Initial Developer of the Original Code is 
-  Michael Möller <m.moeller@gmx.ch>.
-  Portions created by the Initial Developer are Copyright (C) 2009-2010
-  the Initial Developer. All Rights Reserved.
-
-  Contributor(s):
-
-  Alternatively, the contents of this file may be used under the terms of
-  either the GNU General Public License Version 2 or later (the "GPL"), or
-  the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-  in which case the provisions of the GPL or the LGPL are applicable instead
-  of those above. If you wish to allow use of your version of this file only
-  under the terms of either the GPL or the LGPL, and not to allow others to
-  use your version of this file under the terms of the MPL, indicate your
-  decision by deleting the provisions above and replace them with the notice
-  and other provisions required by the GPL or the LGPL. If you do not delete
-  the provisions above, a recipient may use your version of this file under
-  the terms of any one of the MPL, the GPL or the LGPL.
- 
-*/
-
-using System;
-using System.Collections.Generic;
-using System.Drawing;
-using System.Text;
-
-namespace OpenHardwareMonitor.Hardware.LPC {
-  public abstract class Winbond : LPCHardware {
-
-    private ushort address;
-    private byte revision;
-
-    private bool available;
-
-    // Consts 
-    private const ushort WINBOND_VENDOR_ID = 0x5CA3;
-    private const byte HIGH_BYTE = 0x80;
-
-    // Hardware Monitor
-    private const byte ADDRESS_REGISTER_OFFSET = 0x05;
-    private const byte DATA_REGISTER_OFFSET = 0x06;
-
-    // Hardware Monitor Registers
-    private const byte BANK_SELECT_REGISTER = 0x04E;
-    private const byte VENDOR_ID_REGISTER = 0x4F;
-
-    protected byte ReadByte(byte bank, byte register) {
-      WinRing0.WriteIoPortByte(
-         (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);
-      WinRing0.WriteIoPortByte(
-         (ushort)(address + DATA_REGISTER_OFFSET), bank);
-      WinRing0.WriteIoPortByte(
-         (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
-      return WinRing0.ReadIoPortByte(
-        (ushort)(address + DATA_REGISTER_OFFSET));
-    } 
-
-    private bool IsWinbondVendor() {
-      ushort vendorId =
-        (ushort)((ReadByte(HIGH_BYTE, VENDOR_ID_REGISTER) << 8) |
-           ReadByte(0, VENDOR_ID_REGISTER));
-      return vendorId == WINBOND_VENDOR_ID;
-    }
-
-    public Winbond(Chip chip, byte revision, ushort address)
-      : base(chip) 
-    {
-      this.address = address;
-      this.revision = revision;
-
-      available = IsWinbondVendor();
-    }
-
-    public bool IsAvailable {
-      get { return available; }
-    }    
-   
-    public string GetReport() {
-      StringBuilder r = new StringBuilder();
-
-      r.AppendLine("LPC " + this.GetType().Name);
-      r.AppendLine();
-      r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
-      r.Append("Chip revision: 0x"); r.AppendLine(revision.ToString("X"));
-      r.Append("Base Adress: 0x"); r.AppendLine(address.ToString("X4"));
-      r.AppendLine();
-      r.AppendLine("Hardware Monitor Registers");
-      r.AppendLine();
-      r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
-      r.AppendLine();
-      for (int i = 0; i < 0x7; i++) {
-        r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append("  ");
-        for (int j = 0; j <= 0xF; j++) {
-          r.Append(" ");
-          r.Append(ReadByte(0, (byte)((i << 4) | j)).ToString("X2"));
-        }
-        r.AppendLine();
-      }
-      for (int k = 1; k <= 5; k++) {
-        r.AppendLine("Bank " + k);
-        for (int i = 0x5; i < 0x6; i++) {
-          r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append("  ");
-          for (int j = 0; j <= 0xF; j++) {
-            r.Append(" ");
-            r.Append(ReadByte((byte)(k),
-              (byte)((i << 4) | j)).ToString("X2"));
-          }
-          r.AppendLine();
-        }
-      }
-      r.AppendLine();
-
-      return r.ToString();
-    }
-  }
-}