moel@135: /*
moel@130:  
moel@344:   This Source Code Form is subject to the terms of the Mozilla Public
moel@344:   License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344:   file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130:  
moel@344:   Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344: 	
moel@130: */
moel@130: 
moel@228: using System;
moel@130: using System.Collections.Generic;
moel@166: using System.Globalization;
moel@228: using System.Threading;
moel@130: using OpenHardwareMonitor.Hardware.LPC;
moel@130: 
moel@130: namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165:   internal class SuperIOHardware : Hardware {
moel@130: 
moel@195:     private readonly Mainboard mainboard;
moel@195:     private readonly ISuperIO superIO;
moel@130: 
moel@195:     private readonly List<Sensor> voltages = new List<Sensor>();
moel@195:     private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195:     private readonly List<Sensor> fans = new List<Sensor>();
moel@323:     private readonly List<Sensor> controls = new List<Sensor>();
moel@167: 
moel@228:     private delegate float? ReadValueDelegate(int index);
moel@228:     private delegate void UpdateDelegate();
moel@228: 
moel@228:     // delegates for mainboard specific sensor reading code
moel@228:     private readonly ReadValueDelegate readVoltage;
moel@228:     private readonly ReadValueDelegate readTemperature;
moel@228:     private readonly ReadValueDelegate readFan;
moel@323:     private readonly ReadValueDelegate readControl;
moel@228: 
moel@228:     // delegate for post update mainboard specific code
moel@228:     private readonly UpdateDelegate postUpdate;
moel@228: 
moel@228:     // mainboard specific mutex
moel@228:     private readonly Mutex mutex;
moel@228: 
moel@176:     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO, 
moel@176:       Manufacturer manufacturer, Model model, ISettings settings) 
moel@275:       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc", 
moel@275:         superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)), 
moel@275:         settings)
moel@130:     {
moel@176:       this.mainboard = mainboard;
moel@130:       this.superIO = superIO;
moel@130: 
moel@228:       this.readVoltage = (index) => superIO.Voltages[index];
moel@228:       this.readTemperature = (index) => superIO.Temperatures[index];
moel@228:       this.readFan = (index) => superIO.Fans[index];
moel@323:       this.readControl = (index) => superIO.Controls[index];
moel@228: 
moel@228:       this.postUpdate = () => { };
moel@228: 
moel@130:       List<Voltage> v = new List<Voltage>();
moel@130:       List<Temperature> t = new List<Temperature>();
moel@130:       List<Fan> f = new List<Fan>();
moel@323:       List<Ctrl> c = new List<Ctrl>();
moel@130: 
moel@130:       switch (superIO.Chip) {
moel@353:         case Chip.IT8705F:
moel@130:         case Chip.IT8712F:
moel@130:         case Chip.IT8716F:
moel@130:         case Chip.IT8718F:
moel@177:         case Chip.IT8720F: 
moel@319:         case Chip.IT8726F:        
moel@130:           switch (manufacturer) {
moel@133:             case Manufacturer.ASUS:
moel@133:               switch (model) {
moel@168:                 case Model.Crosshair_III_Formula: // IT8720F
moel@133:                   v.Add(new Voltage("VBat", 8));
moel@133:                   t.Add(new Temperature("CPU", 0));
moel@133:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@133:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@133:                   break;
moel@144:                 case Model.M2N_SLI_DELUXE:                
moel@133:                   v.Add(new Voltage("CPU VCore", 0));
moel@133:                   v.Add(new Voltage("+3.3V", 1));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195:                   v.Add(new Voltage("+12V", 4, 30, 10));
moel@195:                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133:                   v.Add(new Voltage("VBat", 8));
moel@133:                   t.Add(new Temperature("CPU", 0));
moel@133:                   t.Add(new Temperature("Motherboard", 1));
moel@133:                   f.Add(new Fan("CPU Fan", 0));
moel@133:                   f.Add(new Fan("Chassis Fan #1", 1));
moel@133:                   f.Add(new Fan("Power Fan", 2));
moel@133:                   break;
moel@168:                 case Model.M4A79XTD_EVO: // IT8720F           
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144:                   v.Add(new Voltage("VBat", 8));
moel@144:                   t.Add(new Temperature("CPU", 0));
moel@144:                   t.Add(new Temperature("Motherboard", 1));
moel@144:                   f.Add(new Fan("CPU Fan", 0));
moel@144:                   f.Add(new Fan("Chassis Fan #1", 1));
moel@144:                   f.Add(new Fan("Chassis Fan #2", 2));
moel@144:                   break;
moel@133:                 default:
moel@133:                   v.Add(new Voltage("CPU VCore", 0));
moel@133:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@133:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@133:                   v.Add(new Voltage("Voltage #4", 3, true));
moel@133:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@133:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@133:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@133:                   v.Add(new Voltage("Voltage #8", 7, true));
moel@133:                   v.Add(new Voltage("VBat", 8));
moel@133:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@133:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@133:                   break;
moel@133:               }
moel@133:               break;
moel@221: 
moel@221:             case Manufacturer.ASRock:
moel@221:               switch (model) {
moel@221:                 case Model.P55_Deluxe: // IT8720F
moel@228:                   
moel@221:                   v.Add(new Voltage("CPU VCore", 0));
moel@221:                   v.Add(new Voltage("+3.3V", 2));
moel@221:                   v.Add(new Voltage("+12V", 4, 30, 10));
moel@221:                   v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221:                   v.Add(new Voltage("VBat", 8));                  
moel@221:                   t.Add(new Temperature("CPU", 0));
moel@221:                   t.Add(new Temperature("Motherboard", 1));
moel@221:                   f.Add(new Fan("CPU Fan", 0));
moel@221:                   f.Add(new Fan("Chassis Fan #1", 1));
moel@228: 
moel@228:                   // this mutex is also used by the official ASRock tool
moel@228:                   mutex = new Mutex(false, "ASRockOCMark");
moel@228:                   
moel@228:                   bool exclusiveAccess = false;
moel@228:                   try {
moel@228:                     exclusiveAccess = mutex.WaitOne(10, false);
moel@228:                   } catch (AbandonedMutexException) { } 
moel@228:                     catch (InvalidOperationException) { }  
moel@228: 
moel@228:                   // only read additional fans if we get exclusive access
moel@228:                   if (exclusiveAccess) {
moel@228: 
moel@228:                     f.Add(new Fan("Chassis Fan #2", 2));
moel@228:                     f.Add(new Fan("Chassis Fan #3", 3));
moel@228:                     f.Add(new Fan("Power Fan", 4));
moel@228: 
moel@228:                     readFan = (index) => {
moel@228:                       if (index < 2) {
moel@228:                         return superIO.Fans[index];
moel@228:                       } else {
moel@228:                         // get GPIO 80-87
moel@228:                         byte? gpio = superIO.ReadGPIO(7);
moel@228:                         if (!gpio.HasValue)
moel@228:                           return null;
moel@228: 
moel@228:                         // read the last 3 fans based on GPIO 83-85
moel@228:                         int[] masks = { 0x05, 0x03, 0x06 };
moel@228:                         return (((gpio.Value >> 3) & 0x07) ==
moel@228:                           masks[index - 2]) ? superIO.Fans[2] : null;
moel@228:                       }
moel@228:                     };
moel@228: 
moel@228:                     int fanIndex = 0;
moel@228:                     postUpdate = () => {
moel@228:                       // get GPIO 80-87
moel@228:                       byte? gpio = superIO.ReadGPIO(7);
moel@228:                       if (!gpio.HasValue)
moel@228:                         return;
moel@228: 
moel@228:                       // prepare the GPIO 83-85 for the next update
moel@228:                       int[] masks = { 0x05, 0x03, 0x06 };
moel@228:                       superIO.WriteGPIO(7,
moel@228:                         (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));
moel@228:                       fanIndex = (fanIndex + 1) % 3;
moel@228:                     };
moel@228:                   }
moel@228: 
moel@221:                   break;
moel@221:                 default:
moel@221:                   v.Add(new Voltage("CPU VCore", 0));
moel@221:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@221:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@221:                   v.Add(new Voltage("Voltage #4", 3, true));
moel@221:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@221:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@221:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@221:                   v.Add(new Voltage("Voltage #8", 7, true));
moel@221:                   v.Add(new Voltage("VBat", 8));
moel@221:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@221:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@221:                   break;
moel@221:               };
moel@221:               break;
moel@221: 
moel@130:             case Manufacturer.DFI:
moel@130:               switch (model) {
moel@168:                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("FSB VTT", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195:                   v.Add(new Voltage("+12V", 4, 30, 10));
moel@130:                   v.Add(new Voltage("NB Core", 5));
moel@130:                   v.Add(new Voltage("VDIMM", 6));
moel@195:                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("CPU", 0));
moel@130:                   t.Add(new Temperature("System", 1));
moel@130:                   t.Add(new Temperature("Chipset", 2));
moel@130:                   f.Add(new Fan("Fan #1", 0));
moel@130:                   f.Add(new Fan("Fan #2", 1));
moel@130:                   f.Add(new Fan("Fan #3", 2));
moel@130:                   break;
moel@168:                 case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("VTT", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195:                   v.Add(new Voltage("+12V", 4, 30, 10));
moel@130:                   v.Add(new Voltage("CPU PLL", 5));
moel@130:                   v.Add(new Voltage("DRAM", 6));
moel@195:                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("Chipset", 0));
moel@130:                   t.Add(new Temperature("CPU PWM", 1));
moel@130:                   t.Add(new Temperature("CPU", 2));
moel@130:                   f.Add(new Fan("Fan #1", 0));
moel@130:                   f.Add(new Fan("Fan #2", 1));
moel@130:                   f.Add(new Fan("Fan #3", 2));
moel@130:                   break;
moel@130:                 default:
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("VTT", 1, true));
moel@130:                   v.Add(new Voltage("+3.3V", 2, true));
moel@130:                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130:                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@130:                   v.Add(new Voltage("DRAM", 6, true));
moel@130:                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@130:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@130:                   break;
moel@130:               }
moel@130:               break;
moel@130: 
moel@130:             case Manufacturer.Gigabyte:
moel@130:               switch (model) {
moel@168:                 case Model._965P_S3: // IT8718F
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("DRAM", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("System", 0));
moel@130:                   t.Add(new Temperature("CPU", 1));
moel@130:                   f.Add(new Fan("CPU Fan", 0));
moel@130:                   f.Add(new Fan("System Fan", 1));
moel@130:                   break;
moel@168:                 case Model.EP45_DS3R: // IT8718F
moel@130:                 case Model.EP45_UD3R: 
moel@138:                 case Model.X38_DS5:    
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("DRAM", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("System", 0));
moel@130:                   t.Add(new Temperature("CPU", 1));
moel@130:                   f.Add(new Fan("CPU Fan", 0));
moel@130:                   f.Add(new Fan("System Fan #2", 1));
moel@130:                   f.Add(new Fan("Power Fan", 2));
moel@130:                   f.Add(new Fan("System Fan #1", 3));
moel@130:                   break;
moel@357:                 case Model.EX58_EXTREME: // IT8720F                 
moel@133:                   v.Add(new Voltage("CPU VCore", 0));
moel@133:                   v.Add(new Voltage("DRAM", 1));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133:                   v.Add(new Voltage("VBat", 8));
moel@133:                   t.Add(new Temperature("System", 0));
moel@133:                   t.Add(new Temperature("CPU", 1));
moel@138:                   t.Add(new Temperature("Northbridge", 2));
moel@133:                   f.Add(new Fan("CPU Fan", 0));
moel@133:                   f.Add(new Fan("System Fan #2", 1));
moel@133:                   f.Add(new Fan("Power Fan", 2));
moel@133:                   f.Add(new Fan("System Fan #1", 3));
moel@133:                   break;
moel@168:                 case Model.P35_DS3: // IT8718F 
moel@168:                 case Model.P35_DS3L: // IT8718F
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("DRAM", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("System", 0));
moel@130:                   t.Add(new Temperature("CPU", 1));
moel@130:                   f.Add(new Fan("CPU Fan", 0));
moel@130:                   f.Add(new Fan("System Fan #1", 1));
moel@130:                   f.Add(new Fan("System Fan #2", 2));
moel@130:                   f.Add(new Fan("Power Fan", 3));
moel@130:                   break;
moel@168:                 case Model.P55_UD4: // IT8720F
moel@357:                 case Model.P55A_UD3: // IT8720F
moel@357:                 case Model.P55M_UD4: // IT8720F                
moel@357:                 case Model.H55_USB3: // IT8720F
moel@357:                 case Model.EX58_UD3R: // IT8720F 
moel@148:                   v.Add(new Voltage("CPU VCore", 0));
moel@148:                   v.Add(new Voltage("DRAM", 1));
moel@148:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@148:                   v.Add(new Voltage("VBat", 8));
moel@148:                   t.Add(new Temperature("System", 0));
moel@148:                   t.Add(new Temperature("CPU", 2));
moel@148:                   f.Add(new Fan("CPU Fan", 0));
moel@148:                   f.Add(new Fan("System Fan #2", 1));
moel@148:                   f.Add(new Fan("Power Fan", 2));
moel@148:                   f.Add(new Fan("System Fan #1", 3));
moel@148:                   break;
moel@357:                 case Model.H55N_USB3: // IT8720F
moel@154:                   v.Add(new Voltage("CPU VCore", 0));
moel@154:                   v.Add(new Voltage("DRAM", 1));
moel@154:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@357:                   v.Add(new Voltage("VBat", 8));
moel@357:                   t.Add(new Temperature("System", 0));
moel@357:                   t.Add(new Temperature("CPU", 2));
moel@357:                   f.Add(new Fan("CPU Fan", 0));
moel@357:                   f.Add(new Fan("System Fan", 1));
moel@357:                   break;
moel@357:                 case Model.G41M_Combo: // IT8718F
moel@357:                 case Model.G41MT_S2: // IT8718F
moel@357:                 case Model.G41MT_S2P: // IT8718F
moel@357:                   v.Add(new Voltage("CPU VCore", 0));
moel@357:                   v.Add(new Voltage("DRAM", 1));
moel@357:                   v.Add(new Voltage("+3.3V", 2));
moel@357:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@357:                   v.Add(new Voltage("VBat", 8));
moel@357:                   t.Add(new Temperature("CPU", 2));
moel@357:                   f.Add(new Fan("CPU Fan", 0));
moel@357:                   f.Add(new Fan("System Fan", 1));
moel@357:                   break;
moel@357:                 case Model.GA_MA770T_UD3: // IT8720F
moel@359:                 case Model.GA_MA770T_UD3P: // IT8720F                
moel@357:                 case Model.GA_MA790X_UD3P: // IT8720F
moel@357:                   v.Add(new Voltage("CPU VCore", 0));
moel@357:                   v.Add(new Voltage("DRAM", 1));
moel@357:                   v.Add(new Voltage("+3.3V", 2));
moel@357:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@154:                   v.Add(new Voltage("VBat", 8));
moel@154:                   t.Add(new Temperature("System", 0));
moel@154:                   t.Add(new Temperature("CPU", 1));
moel@154:                   f.Add(new Fan("CPU Fan", 0));
moel@154:                   f.Add(new Fan("System Fan #1", 1));
moel@154:                   f.Add(new Fan("System Fan #2", 2));
moel@154:                   f.Add(new Fan("Power Fan", 3));
moel@154:                   break;
moel@359:                 case Model.GA_MA78LM_S2H: // IT8718F
moel@359:                   v.Add(new Voltage("CPU VCore", 0));
moel@359:                   v.Add(new Voltage("DRAM", 1));
moel@359:                   v.Add(new Voltage("+3.3V", 2));
moel@359:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@359:                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@359:                   v.Add(new Voltage("VBat", 8));
moel@359:                   t.Add(new Temperature("System", 0));
moel@359:                   t.Add(new Temperature("CPU", 1));
moel@359:                   t.Add(new Temperature("VRM", 2));
moel@359:                   f.Add(new Fan("CPU Fan", 0));
moel@359:                   f.Add(new Fan("System Fan #1", 1));
moel@359:                   f.Add(new Fan("System Fan #2", 2));
moel@359:                   f.Add(new Fan("Power Fan", 3));
moel@359:                   break;
moel@357:                 case Model.GA_MA785GM_US2H: // IT8718F
moel@168:                 case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("DRAM", 1));
moel@130:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   t.Add(new Temperature("System", 0));
moel@130:                   t.Add(new Temperature("CPU", 1));
moel@130:                   f.Add(new Fan("CPU Fan", 0));
moel@130:                   f.Add(new Fan("System Fan", 1));
moel@130:                   f.Add(new Fan("NB Fan", 2));
moel@130:                   break;
moel@168:                 case Model.X58A_UD3R: // IT8720F 
moel@138:                   v.Add(new Voltage("CPU VCore", 0));
moel@138:                   v.Add(new Voltage("DRAM", 1));
moel@138:                   v.Add(new Voltage("+3.3V", 2));
moel@195:                   v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357:                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@138:                   v.Add(new Voltage("VBat", 8));
moel@138:                   t.Add(new Temperature("System", 0));
moel@138:                   t.Add(new Temperature("CPU", 1));
moel@138:                   t.Add(new Temperature("Northbridge", 2));
moel@138:                   f.Add(new Fan("CPU Fan", 0));
moel@138:                   f.Add(new Fan("System Fan #2", 1));
moel@138:                   f.Add(new Fan("Power Fan", 2));
moel@138:                   f.Add(new Fan("System Fan #1", 3));
moel@138:                   break;
moel@130:                 default:
moel@130:                   v.Add(new Voltage("CPU VCore", 0));
moel@130:                   v.Add(new Voltage("DRAM", 1, true));
moel@130:                   v.Add(new Voltage("+3.3V", 2, true));
moel@130:                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@130:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@130:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@257:                   v.Add(new Voltage("Voltage #8", 7, true));
moel@130:                   v.Add(new Voltage("VBat", 8));
moel@130:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@130:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@130:                   break;
moel@130:               }
moel@130:               break;
moel@130: 
moel@130:             default:
moel@130:               v.Add(new Voltage("CPU VCore", 0));
moel@130:               v.Add(new Voltage("Voltage #2", 1, true));
moel@130:               v.Add(new Voltage("Voltage #3", 2, true));
moel@130:               v.Add(new Voltage("Voltage #4", 3, true));
moel@130:               v.Add(new Voltage("Voltage #5", 4, true));
moel@130:               v.Add(new Voltage("Voltage #6", 5, true));
moel@130:               v.Add(new Voltage("Voltage #7", 6, true));
moel@130:               v.Add(new Voltage("Voltage #8", 7, true));
moel@130:               v.Add(new Voltage("VBat", 8));
moel@130:               for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130:                 t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130:               for (int i = 0; i < superIO.Fans.Length; i++)
moel@130:                 f.Add(new Fan("Fan #" + (i + 1), i));
moel@130:               break;
moel@130:           }
moel@130:           break;
moel@170: 
moel@170:         case Chip.IT8721F:
moel@277:         case Chip.IT8728F:
moel@341:         case Chip.IT8771E:
moel@319:         case Chip.IT8772E:
moel@177:           switch (manufacturer) {
moel@177:             case Manufacturer.ECS:
moel@177:               switch (model) {
moel@177:                 case Model.A890GXM_A: // IT8721F
moel@177:                   v.Add(new Voltage("CPU VCore", 0));
moel@177:                   v.Add(new Voltage("VDIMM", 1));
moel@177:                   v.Add(new Voltage("NB Voltage", 2));
moel@195:                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177:                   // v.Add(new Voltage("VDIMM", 6, true));
moel@195:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@177:                   t.Add(new Temperature("CPU", 0));
moel@177:                   t.Add(new Temperature("System", 1));
moel@177:                   t.Add(new Temperature("Northbridge", 2));
moel@177:                   f.Add(new Fan("CPU Fan", 0));
moel@177:                   f.Add(new Fan("System Fan", 1));
moel@177:                   f.Add(new Fan("Power Fan", 2));
moel@177:                   break;
moel@177:                 default:
moel@177:                   v.Add(new Voltage("Voltage #1", 0, true));
moel@177:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@177:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@177:                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@177:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@177:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@177:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@177:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@177:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@177:                   break;
moel@177:               }
moel@177:               break;
moel@278:             case Manufacturer.Gigabyte:
moel@278:               switch (model) {
moel@357:                 case Model.H61M_DS2_REV_1_2: // IT8728F
moel@357:                 case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@357:                   v.Add(new Voltage("VTT", 0));
moel@357:                   v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@278:                   v.Add(new Voltage("CPU VCore", 5));
moel@278:                   v.Add(new Voltage("DRAM", 6));
moel@278:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@278:                   t.Add(new Temperature("System", 0));
moel@278:                   t.Add(new Temperature("CPU", 2));
moel@278:                   f.Add(new Fan("CPU Fan", 0));
moel@357:                   f.Add(new Fan("System Fan", 1));
moel@278:                   break;
moel@290:                 case Model.H67A_UD3H_B3: // IT8728F
moel@357:                 case Model.H67A_USB3_B3: // IT8728F                
moel@290:                   v.Add(new Voltage("VTT", 0));
moel@290:                   v.Add(new Voltage("+5V", 1, 15, 10));
moel@357:                   v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@290:                   v.Add(new Voltage("CPU VCore", 5));
moel@290:                   v.Add(new Voltage("DRAM", 6));
moel@290:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@290:                   t.Add(new Temperature("System", 0));
moel@290:                   t.Add(new Temperature("CPU", 2));
moel@290:                   f.Add(new Fan("CPU Fan", 0));
moel@290:                   f.Add(new Fan("System Fan #1", 1));
moel@290:                   f.Add(new Fan("Power Fan", 2));
moel@290:                   f.Add(new Fan("System Fan #2", 3));
moel@290:                   break;
moel@357:                 case Model.Z68A_D3H_B3: // IT8728F
moel@357:                   v.Add(new Voltage("VTT", 0));
moel@357:                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357:                   v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357:                   v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357:                   v.Add(new Voltage("CPU VCore", 5));
moel@357:                   v.Add(new Voltage("DRAM", 6));
moel@357:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@357:                   t.Add(new Temperature("System", 0));
moel@357:                   t.Add(new Temperature("CPU", 2));
moel@357:                   f.Add(new Fan("CPU Fan", 0));
moel@357:                   f.Add(new Fan("System Fan #1", 1));
moel@357:                   f.Add(new Fan("Power Fan", 2));
moel@357:                   f.Add(new Fan("System Fan #2", 3));
moel@357:                   break;
moel@357:                 case Model.P67A_UD3_B3: // IT8728F
moel@357:                 case Model.P67A_UD3R_B3: // IT8728F
moel@357:                 case Model.P67A_UD4_B3: // IT8728F                
moel@357:                 case Model.Z68AP_D3: // IT8728F
moel@357:                 case Model.Z68X_UD3H_B3: // IT8728F               
moel@357:                   v.Add(new Voltage("VTT", 0));
moel@357:                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357:                   v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357:                   v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357:                   v.Add(new Voltage("CPU VCore", 5));
moel@357:                   v.Add(new Voltage("DRAM", 6));
moel@357:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@357:                   t.Add(new Temperature("System", 0));
moel@357:                   t.Add(new Temperature("CPU", 2));
moel@357:                   f.Add(new Fan("CPU Fan", 0));
moel@357:                   f.Add(new Fan("System Fan #2", 1));
moel@357:                   f.Add(new Fan("Power Fan", 2));
moel@357:                   f.Add(new Fan("System Fan #1", 3));
moel@357:                   break;                
moel@305:                 case Model.Z68X_UD7_B3: // IT8728F
moel@305:                   v.Add(new Voltage("VTT", 0));
moel@357:                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357:                   v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357:                   v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@305:                   v.Add(new Voltage("CPU VCore", 5));
moel@305:                   v.Add(new Voltage("DRAM", 6));
moel@305:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@305:                   t.Add(new Temperature("System", 0));
moel@305:                   t.Add(new Temperature("CPU", 1));
moel@305:                   t.Add(new Temperature("System 3", 2));
moel@305:                   f.Add(new Fan("CPU Fan", 0));
moel@305:                   f.Add(new Fan("Power Fan", 1));
moel@305:                   f.Add(new Fan("System Fan #1", 2));
moel@305:                   f.Add(new Fan("System Fan #2", 3));
moel@305:                   f.Add(new Fan("System Fan #3", 4));
moel@305:                   break;
moel@278:                 default:
moel@278:                   v.Add(new Voltage("Voltage #1", 0, true));
moel@278:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@278:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@278:                   v.Add(new Voltage("Voltage #4", 3, true));
moel@278:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@278:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@278:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@278:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@278:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@278:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@278:                   break;
moel@278:               }
moel@278:               break;
moel@320:             case Manufacturer.Shuttle:
moel@320:               switch (model) {
moel@320:                 case Model.FH67: // IT8772E 
moel@320:                   v.Add(new Voltage("CPU VCore", 0));
moel@320:                   v.Add(new Voltage("DRAM", 1));
moel@320:                   v.Add(new Voltage("PCH VCCIO", 2));
moel@320:                   v.Add(new Voltage("CPU VCCIO", 3));
moel@320:                   v.Add(new Voltage("Graphic Voltage", 4));
moel@320:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@320:                   t.Add(new Temperature("System", 0));
moel@320:                   t.Add(new Temperature("CPU", 1));                  
moel@320:                   f.Add(new Fan("Fan #1", 0));
moel@320:                   f.Add(new Fan("CPU Fan", 1));
moel@320:                   break;
moel@320:                 default:
moel@320:                   v.Add(new Voltage("Voltage #1", 0, true));
moel@320:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@320:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@320:                   v.Add(new Voltage("Voltage #4", 3, true));
moel@320:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@320:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@320:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@320:                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320:                   v.Add(new Voltage("VBat", 8, 10, 10));
moel@320:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@320:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@320:                   break;
moel@320:               }
moel@320:               break;
moel@177:             default:
moel@177:               v.Add(new Voltage("Voltage #1", 0, true));
moel@177:               v.Add(new Voltage("Voltage #2", 1, true));
moel@177:               v.Add(new Voltage("Voltage #3", 2, true));
moel@277:               v.Add(new Voltage("Voltage #4", 3, true));
moel@177:               v.Add(new Voltage("Voltage #5", 4, true));
moel@177:               v.Add(new Voltage("Voltage #6", 5, true));
moel@177:               v.Add(new Voltage("Voltage #7", 6, true));
moel@177:               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195:               v.Add(new Voltage("VBat", 8, 10, 10));
moel@177:               for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177:                 t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177:               for (int i = 0; i < superIO.Fans.Length; i++)
moel@177:                 f.Add(new Fan("Fan #" + (i + 1), i));
moel@177:               break;
moel@177:           }
moel@170:           break;
moel@130:           
moel@130:         case Chip.F71858:
moel@195:           v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195:           v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195:           v.Add(new Voltage("Battery", 2, 150, 150));
moel@130:           for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130:             t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130:           for (int i = 0; i < superIO.Fans.Length; i++)
moel@130:             f.Add(new Fan("Fan #" + (i + 1), i));
moel@130:           break;
moel@130:         case Chip.F71862: 
moel@130:         case Chip.F71869: 
moel@130:         case Chip.F71882:
moel@296:         case Chip.F71889AD: 
moel@130:         case Chip.F71889ED: 
moel@130:         case Chip.F71889F:
moel@352:         case Chip.F71808E:
moel@132:           switch (manufacturer) {
moel@132:             case Manufacturer.EVGA:
moel@132:               switch (model) {
moel@168:                 case Model.X58_SLI_Classified: // F71882 
moel@195:                   v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195:                   v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195:                   v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195:                   v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195:                   v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195:                   v.Add(new Voltage("+5V", 5, 51, 12));
moel@195:                   v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195:                   v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195:                   v.Add(new Voltage("VBat", 8, 150, 150));
moel@132:                   t.Add(new Temperature("CPU", 0));
moel@132:                   t.Add(new Temperature("VREG", 1));
moel@132:                   t.Add(new Temperature("System", 2));
moel@132:                   f.Add(new Fan("CPU Fan", 0));
moel@132:                   f.Add(new Fan("Power Fan", 1));
moel@132:                   f.Add(new Fan("Chassis Fan", 2));
moel@132:                   break;
moel@132:                 default:
moel@195:                   v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132:                   v.Add(new Voltage("CPU VCore", 1));
moel@132:                   v.Add(new Voltage("Voltage #3", 2, true));
moel@132:                   v.Add(new Voltage("Voltage #4", 3, true));
moel@132:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@132:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@132:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@195:                   v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195:                   v.Add(new Voltage("VBat", 8, 150, 150));
moel@132:                   for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132:                     t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@132:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@132:                   break;
moel@132:               }
moel@132:               break;
moel@132:             default:
moel@195:               v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132:               v.Add(new Voltage("CPU VCore", 1));
moel@132:               v.Add(new Voltage("Voltage #3", 2, true));
moel@132:               v.Add(new Voltage("Voltage #4", 3, true));
moel@132:               v.Add(new Voltage("Voltage #5", 4, true));
moel@132:               v.Add(new Voltage("Voltage #6", 5, true));
moel@352:               if (superIO.Chip != Chip.F71808E) 
moel@352:                   v.Add(new Voltage("Voltage #7", 6, true)); 
moel@195:               v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195:               v.Add(new Voltage("VBat", 8, 150, 150));
moel@132:               for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132:                 t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132:               for (int i = 0; i < superIO.Fans.Length; i++)
moel@132:                 f.Add(new Fan("Fan #" + (i + 1), i));
moel@132:               break;
moel@132:           }
moel@130:           break;
moel@130: 
moel@220:         case Chip.W83627EHF:
moel@220:           switch (manufacturer) {
moel@220:             case Manufacturer.ASRock:
moel@220:               switch (model) {
moel@220:                 case Model.AOD790GX_128M: // W83627EHF
moel@220:                   v.Add(new Voltage("CPU VCore", 0));
moel@220:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220:                   v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220:                   v.Add(new Voltage("+5V", 5, 20, 10));
moel@220:                   v.Add(new Voltage("+12V", 6, 28, 5));
moel@220:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220:                   t.Add(new Temperature("CPU", 0));
moel@220:                   t.Add(new Temperature("Motherboard", 2));
moel@221:                   f.Add(new Fan("CPU Fan", 0));
moel@221:                   f.Add(new Fan("Chassis Fan", 1));                 
moel@220:                   break;
moel@220:                 default:
moel@220:                   v.Add(new Voltage("CPU VCore", 0));
moel@220:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@220:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@220:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@220:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@220:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220:                   v.Add(new Voltage("Voltage #10", 9, true));
moel@220:                   t.Add(new Temperature("CPU", 0));
moel@220:                   t.Add(new Temperature("Auxiliary", 1));
moel@220:                   t.Add(new Temperature("System", 2));
moel@220:                   f.Add(new Fan("System Fan", 0));
moel@220:                   f.Add(new Fan("CPU Fan", 1));
moel@220:                   f.Add(new Fan("Auxiliary Fan", 2));
moel@220:                   f.Add(new Fan("CPU Fan #2", 3));
moel@220:                   f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220:                   break;
moel@220:               } break;
moel@220:             default:
moel@220:               v.Add(new Voltage("CPU VCore", 0));
moel@220:               v.Add(new Voltage("Voltage #2", 1, true));
moel@220:               v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220:               v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220:               v.Add(new Voltage("Voltage #5", 4, true));
moel@220:               v.Add(new Voltage("Voltage #6", 5, true));
moel@220:               v.Add(new Voltage("Voltage #7", 6, true));
moel@220:               v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220:               v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220:               v.Add(new Voltage("Voltage #10", 9, true));
moel@220:               t.Add(new Temperature("CPU", 0));
moel@220:               t.Add(new Temperature("Auxiliary", 1));
moel@220:               t.Add(new Temperature("System", 2));
moel@220:               f.Add(new Fan("System Fan", 0));
moel@220:               f.Add(new Fan("CPU Fan", 1));
moel@220:               f.Add(new Fan("Auxiliary Fan", 2));
moel@220:               f.Add(new Fan("CPU Fan #2", 3));
moel@220:               f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220:               break;
moel@220:           }
moel@130:           break;
moel@130:         case Chip.W83627DHG: 
moel@130:         case Chip.W83627DHGP:                      
moel@130:         case Chip.W83667HG:
moel@130:         case Chip.W83667HGB:
moel@152:           switch (manufacturer) {
moel@153:             case Manufacturer.ASRock:
moel@153:               switch (model) {
moel@168:                 case Model._880GMH_USB3: // W83627DHG-P
moel@153:                   v.Add(new Voltage("CPU VCore", 0));
moel@195:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195:                   v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195:                   v.Add(new Voltage("+12V", 6, 56, 10));
moel@195:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153:                   t.Add(new Temperature("CPU", 0));
moel@153:                   t.Add(new Temperature("Motherboard", 2));
moel@153:                   f.Add(new Fan("Chassis Fan", 0));
moel@153:                   f.Add(new Fan("CPU Fan", 1));
moel@153:                   f.Add(new Fan("Power Fan", 2));
moel@153:                   break;
moel@153:                 default:
moel@153:                   v.Add(new Voltage("CPU VCore", 0));
moel@153:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@195:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@153:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@153:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@195:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153:                   t.Add(new Temperature("CPU", 0));
moel@153:                   t.Add(new Temperature("Auxiliary", 1));
moel@153:                   t.Add(new Temperature("System", 2));
moel@153:                   f.Add(new Fan("System Fan", 0));
moel@153:                   f.Add(new Fan("CPU Fan", 1));
moel@153:                   f.Add(new Fan("Auxiliary Fan", 2));
moel@153:                   f.Add(new Fan("CPU Fan #2", 3));
moel@153:                   f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153:                   break;
moel@153:               }
moel@153:               break;
moel@152:             case Manufacturer.ASUS:
moel@152:               switch (model) {
moel@336:                 case Model.P6T: // W83667HG
moel@174:                 case Model.P6X58D_E: // W83667HG                 
moel@174:                 case Model.Rampage_II_GENE: // W83667HG 
moel@152:                   v.Add(new Voltage("CPU VCore", 0));
moel@195:                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195:                   v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174:                   t.Add(new Temperature("CPU", 0));
moel@174:                   t.Add(new Temperature("Motherboard", 2));
moel@174:                   f.Add(new Fan("Chassis Fan #1", 0));
moel@174:                   f.Add(new Fan("CPU Fan", 1));
moel@174:                   f.Add(new Fan("Power Fan", 2));
moel@174:                   f.Add(new Fan("Chassis Fan #2", 3));
moel@174:                   f.Add(new Fan("Chassis Fan #3", 4));
moel@174:                   break;
moel@174:                 case Model.Rampage_Extreme: // W83667HG 
moel@174:                   v.Add(new Voltage("CPU VCore", 0));
moel@195:                   v.Add(new Voltage("+12V", 1, 12, 2));
moel@195:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195:                   v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152:                   t.Add(new Temperature("CPU", 0));
moel@152:                   t.Add(new Temperature("Motherboard", 2));
moel@152:                   f.Add(new Fan("Chassis Fan #1", 0));
moel@153:                   f.Add(new Fan("CPU Fan", 1));
moel@153:                   f.Add(new Fan("Power Fan", 2));
moel@152:                   f.Add(new Fan("Chassis Fan #2", 3));
moel@152:                   f.Add(new Fan("Chassis Fan #3", 4));
moel@152:                   break;
moel@152:                 default:
moel@152:                   v.Add(new Voltage("CPU VCore", 0));
moel@152:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@195:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@152:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@152:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@195:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152:                   t.Add(new Temperature("CPU", 0));
moel@152:                   t.Add(new Temperature("Auxiliary", 1));
moel@152:                   t.Add(new Temperature("System", 2));
moel@153:                   f.Add(new Fan("System Fan", 0));
moel@153:                   f.Add(new Fan("CPU Fan", 1));
moel@153:                   f.Add(new Fan("Auxiliary Fan", 2));
moel@153:                   f.Add(new Fan("CPU Fan #2", 3));
moel@153:                   f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152:                   break;
moel@152:               }
moel@152:               break;
moel@152:             default:
moel@152:               v.Add(new Voltage("CPU VCore", 0));
moel@152:               v.Add(new Voltage("Voltage #2", 1, true));
moel@195:               v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195:               v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152:               v.Add(new Voltage("Voltage #5", 4, true));
moel@152:               v.Add(new Voltage("Voltage #6", 5, true));
moel@152:               v.Add(new Voltage("Voltage #7", 6, true));
moel@195:               v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195:               v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152:               t.Add(new Temperature("CPU", 0));
moel@152:               t.Add(new Temperature("Auxiliary", 1));
moel@152:               t.Add(new Temperature("System", 2));
moel@153:               f.Add(new Fan("System Fan", 0));
moel@153:               f.Add(new Fan("CPU Fan", 1));
moel@153:               f.Add(new Fan("Auxiliary Fan", 2));
moel@153:               f.Add(new Fan("CPU Fan #2", 3));
moel@153:               f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152:               break;
moel@152:           } 
moel@130:           break;
moel@130:         case Chip.W83627HF: 
moel@130:         case Chip.W83627THF: 
moel@130:         case Chip.W83687THF:
moel@130:           v.Add(new Voltage("CPU VCore", 0));
moel@130:           v.Add(new Voltage("Voltage #2", 1, true));
moel@130:           v.Add(new Voltage("Voltage #3", 2, true));
moel@195:           v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130:           v.Add(new Voltage("Voltage #5", 4, true));
moel@195:           v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130:           v.Add(new Voltage("VBAT", 6));
moel@130:           t.Add(new Temperature("CPU", 0));
moel@130:           t.Add(new Temperature("Auxiliary", 1));
moel@130:           t.Add(new Temperature("System", 2));
moel@153:           f.Add(new Fan("System Fan", 0));
moel@153:           f.Add(new Fan("CPU Fan", 1));
moel@153:           f.Add(new Fan("Auxiliary Fan", 2));
moel@130:           break;
moel@245:         case Chip.NCT6771F:
moel@265:         case Chip.NCT6776F:
moel@265:           switch (manufacturer) {
moel@265:             case Manufacturer.ASUS:
moel@265:               switch (model) {
moel@312:                 case Model.P8P67: // NCT6776F
moel@311:                 case Model.P8P67_EVO: // NCT6776F
moel@265:                 case Model.P8P67_PRO: // NCT6776F
moel@265:                   v.Add(new Voltage("CPU VCore", 0));
moel@310:                   v.Add(new Voltage("+12V", 1, 11, 1));
moel@310:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310:                   v.Add(new Voltage("+5V", 4, 12, 3));
moel@310:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310:                   t.Add(new Temperature("CPU", 0));
moel@276:                   t.Add(new Temperature("Auxiliary", 2));
moel@310:                   t.Add(new Temperature("Motherboard", 3));
moel@310:                   f.Add(new Fan("Chassis Fan #1", 0));
moel@265:                   f.Add(new Fan("CPU Fan", 1));
moel@310:                   f.Add(new Fan("Power Fan", 2));
moel@310:                   f.Add(new Fan("Chassis Fan #2", 3));
moel@323:                   c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323:                   c.Add(new Ctrl("CPU Fan", 1));
moel@323:                   c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265:                   break;
moel@276:                 case Model.P8P67_M_PRO: // NCT6776F
moel@276:                   v.Add(new Voltage("CPU VCore", 0));
moel@276:                   v.Add(new Voltage("+12V", 1, 11, 1));
moel@276:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276:                   v.Add(new Voltage("+5V", 4, 12, 3));
moel@276:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@276:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@276:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276:                   t.Add(new Temperature("CPU", 0));
moel@276:                   t.Add(new Temperature("Motherboard", 3));
moel@276:                   f.Add(new Fan("Chassis Fan #1", 0));
moel@276:                   f.Add(new Fan("CPU Fan", 1));
moel@276:                   f.Add(new Fan("Chassis Fan #2", 2));
moel@276:                   f.Add(new Fan("Power Fan", 3));
moel@276:                   f.Add(new Fan("Auxiliary Fan", 4));
moel@276:                   break;
moel@337:                 case Model.P8Z68_V_PRO: // NCT6776F
moel@337:                   v.Add(new Voltage("CPU VCore", 0));
moel@337:                   v.Add(new Voltage("+12V", 1, 11, 1));
moel@337:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337:                   v.Add(new Voltage("+5V", 4, 12, 3));
moel@337:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337:                   t.Add(new Temperature("CPU", 0));
moel@337:                   t.Add(new Temperature("Auxiliary", 2));
moel@337:                   t.Add(new Temperature("Motherboard", 3));
moel@337:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@337:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@337:                   for (int i = 0; i < superIO.Controls.Length; i++)
moel@337:                     c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337:                   break;
moel@332:                 case Model.P9X79: // NCT6776F
moel@332:                   v.Add(new Voltage("CPU VCore", 0));
moel@332:                   v.Add(new Voltage("+12V", 1, 11, 1));
moel@332:                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332:                   v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332:                   v.Add(new Voltage("+5V", 4, 12, 3));
moel@332:                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332:                   t.Add(new Temperature("CPU", 0));
moel@332:                   t.Add(new Temperature("Motherboard", 3));
moel@332:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@332:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@332:                   break;
moel@265:                 default:
moel@265:                   v.Add(new Voltage("CPU VCore", 0));
moel@265:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@265:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@265:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@265:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@265:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354:                   t.Add(new Temperature("CPU Core", 0));                  
moel@354:                   t.Add(new Temperature("Temperature #1", 1));
moel@354:                   t.Add(new Temperature("Temperature #2", 2));
moel@354:                   t.Add(new Temperature("Temperature #3", 3));
moel@265:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@265:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@265:                   break;
moel@265:               }
moel@265:               break;
moel@265:             default:
moel@265:               v.Add(new Voltage("CPU VCore", 0));
moel@265:               v.Add(new Voltage("Voltage #2", 1, true));
moel@265:               v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265:               v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265:               v.Add(new Voltage("Voltage #5", 4, true));
moel@265:               v.Add(new Voltage("Voltage #6", 5, true));
moel@265:               v.Add(new Voltage("Voltage #7", 6, true));
moel@265:               v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265:               v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354:               t.Add(new Temperature("CPU Core", 0));
moel@354:               t.Add(new Temperature("Temperature #1", 1));
moel@354:               t.Add(new Temperature("Temperature #2", 2));
moel@354:               t.Add(new Temperature("Temperature #3", 3));
moel@265:               for (int i = 0; i < superIO.Fans.Length; i++)
moel@265:                 f.Add(new Fan("Fan #" + (i + 1), i));
moel@265:               break;
moel@265:           }
moel@245:           break;
moel@356:         case Chip.NCT6779D:
moel@359:           switch (manufacturer) {
moel@359:             case Manufacturer.ASUS:
moel@359:               switch (model) {
moel@359:                 case Model.P8Z77_V:
moel@359:                   v.Add(new Voltage("CPU VCore", 0));
moel@359:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@359:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@359:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@359:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@359:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359:                   v.Add(new Voltage("VTT", 9));
moel@359:                   v.Add(new Voltage("Voltage #11", 10, true));
moel@359:                   v.Add(new Voltage("Voltage #12", 11, true));
moel@359:                   v.Add(new Voltage("Voltage #13", 12, true));
moel@359:                   v.Add(new Voltage("Voltage #14", 13, true));
moel@359:                   v.Add(new Voltage("Voltage #15", 14, true));
moel@359:                   t.Add(new Temperature("CPU Core", 0));
moel@359:                   t.Add(new Temperature("Auxiliary", 1));
moel@359:                   t.Add(new Temperature("Motherboard", 2));
moel@359:                   f.Add(new Fan("Chassis Fan #1", 0));
moel@359:                   f.Add(new Fan("CPU Fan", 1));
moel@359:                   f.Add(new Fan("Chassis Fan #2", 2));
moel@359:                   f.Add(new Fan("Chassis Fan #3", 3));
moel@359:                   c.Add(new Ctrl("Chassis Fan #1", 0));
moel@359:                   c.Add(new Ctrl("CPU  Fan", 1));
moel@359:                   c.Add(new Ctrl("Chassis Fan #2", 2));
moel@359:                   c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359:                   break;
moel@368:                 default:
moel@368:                   v.Add(new Voltage("CPU VCore", 0));
moel@368:                   v.Add(new Voltage("Voltage #2", 1, true));
moel@368:                   v.Add(new Voltage("AVCC", 2, 34, 34));
moel@368:                   v.Add(new Voltage("3VCC", 3, 34, 34));
moel@368:                   v.Add(new Voltage("Voltage #5", 4, true));
moel@368:                   v.Add(new Voltage("Voltage #6", 5, true));
moel@368:                   v.Add(new Voltage("Voltage #7", 6, true));
moel@368:                   v.Add(new Voltage("3VSB", 7, 34, 34));
moel@368:                   v.Add(new Voltage("VBAT", 8, 34, 34));
moel@368:                   v.Add(new Voltage("VTT", 9));
moel@368:                   v.Add(new Voltage("Voltage #11", 10, true));
moel@368:                   v.Add(new Voltage("Voltage #12", 11, true));
moel@368:                   v.Add(new Voltage("Voltage #13", 12, true));
moel@368:                   v.Add(new Voltage("Voltage #14", 13, true));
moel@368:                   v.Add(new Voltage("Voltage #15", 14, true));
moel@368:                   t.Add(new Temperature("CPU Core", 0));
moel@368:                   t.Add(new Temperature("Temperature #1", 1));
moel@368:                   t.Add(new Temperature("Temperature #2", 2));
moel@368:                   t.Add(new Temperature("Temperature #3", 3));
moel@368:                   t.Add(new Temperature("Temperature #4", 4));
moel@368:                   t.Add(new Temperature("Temperature #5", 5));
moel@368:                   t.Add(new Temperature("Temperature #6", 6));
moel@368:                   for (int i = 0; i < superIO.Fans.Length; i++)
moel@368:                     f.Add(new Fan("Fan #" + (i + 1), i));
moel@368:                   for (int i = 0; i < superIO.Controls.Length; i++)
moel@368:                     c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@368:                   break;
moel@359:               }
moel@359:               break;
moel@359:             default:
moel@359:               v.Add(new Voltage("CPU VCore", 0));
moel@359:               v.Add(new Voltage("Voltage #2", 1, true));
moel@359:               v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359:               v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359:               v.Add(new Voltage("Voltage #5", 4, true));
moel@359:               v.Add(new Voltage("Voltage #6", 5, true));
moel@359:               v.Add(new Voltage("Voltage #7", 6, true));
moel@359:               v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359:               v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359:               v.Add(new Voltage("VTT", 9));
moel@359:               v.Add(new Voltage("Voltage #11", 10, true));
moel@359:               v.Add(new Voltage("Voltage #12", 11, true));
moel@359:               v.Add(new Voltage("Voltage #13", 12, true));
moel@359:               v.Add(new Voltage("Voltage #14", 13, true));
moel@359:               v.Add(new Voltage("Voltage #15", 14, true));
moel@359:               t.Add(new Temperature("CPU Core", 0));
moel@359:               t.Add(new Temperature("Temperature #1", 1));
moel@359:               t.Add(new Temperature("Temperature #2", 2));
moel@359:               t.Add(new Temperature("Temperature #3", 3));
moel@359:               t.Add(new Temperature("Temperature #4", 4));
moel@359:               t.Add(new Temperature("Temperature #5", 5));
moel@359:               t.Add(new Temperature("Temperature #6", 6));
moel@359:               for (int i = 0; i < superIO.Fans.Length; i++)
moel@359:                 f.Add(new Fan("Fan #" + (i + 1), i));
moel@359:               for (int i = 0; i < superIO.Controls.Length; i++)
moel@359:                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359:               break;
moel@359:           }
moel@356:           break;
moel@130:         default:
moel@130:           for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130:             v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130:           for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130:             t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130:           for (int i = 0; i < superIO.Fans.Length; i++)
moel@130:             f.Add(new Fan("Fan #" + (i + 1), i));
moel@323:           for (int i = 0; i < superIO.Controls.Length; i++)
moel@323:             c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130:           break;
moel@130:       }
moel@130: 
moel@195:       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130:       foreach (Voltage voltage in v) 
moel@130:         if (voltage.Index < superIO.Voltages.Length) {
moel@130:           Sensor sensor = new Sensor(voltage.Name, voltage.Index, 
moel@195:             voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130:             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" + 
moel@130:               formula, voltage.Ri),
moel@130:             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" + 
moel@130:               formula, voltage.Rf),
moel@130:             new ParameterDescription("Vf [V]", "Reference voltage.\n" + 
moel@130:               formula, voltage.Vf)
moel@165:             }, settings);
moel@130:           voltages.Add(sensor);
moel@130:       }
moel@130: 
moel@130:       foreach (Temperature temperature in t) 
moel@130:         if (temperature.Index < superIO.Temperatures.Length) {
moel@134:         Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195:           SensorType.Temperature, this, new [] {
moel@130:           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165:         }, settings);
moel@130:         temperatures.Add(sensor);
moel@130:       }
moel@130: 
moel@130:       foreach (Fan fan in f)
moel@130:         if (fan.Index < superIO.Fans.Length) {
moel@134:           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165:             this, settings);
moel@130:           fans.Add(sensor);
moel@130:         }
moel@323: 
moel@323:       foreach (Ctrl ctrl in c) {
moel@323:         int index = ctrl.Index;
moel@323:         if (index < superIO.Controls.Length) {
moel@323:           Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323:             this, settings);
moel@323:           Control control = new Control(sensor, settings, 0, 100);
moel@323:           control.ControlModeChanged += (cc) => {
moel@323:             if (cc.ControlMode == ControlMode.Default) {
moel@323:               superIO.SetControl(index, null);
moel@323:             } else {
moel@323:               superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323:             }
moel@323:           };
moel@323:           control.SoftwareControlValueChanged += (cc) => {
moel@323:             if (cc.ControlMode == ControlMode.Software) 
moel@323:               superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323:           };
moel@323:           if (control.ControlMode == ControlMode.Software) 
moel@323:             superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323:           sensor.Control = control;
moel@323:           controls.Add(sensor);
moel@323:         }
moel@323:       }
moel@130:     }
moel@130: 
moel@165:     public override HardwareType HardwareType {
moel@165:       get { return HardwareType.SuperIO; }
moel@130:     }
moel@130: 
moel@176:     public override IHardware Parent {
moel@176:       get { return mainboard; }
moel@176:     }
moel@176: 
moel@130: 
moel@130:     public override string GetReport() {
moel@130:       return superIO.GetReport();
moel@130:     }
moel@130: 
moel@130:     public override void Update() {
moel@130:       superIO.Update();
moel@130: 
moel@130:       foreach (Sensor sensor in voltages) {
moel@228:         float? value = readVoltage(sensor.Index);
moel@130:         if (value.HasValue) {
moel@130:           sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130:             sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130:           ActivateSensor(sensor);
moel@130:         }
moel@130:       }
moel@130: 
moel@130:       foreach (Sensor sensor in temperatures) {
moel@228:         float? value = readTemperature(sensor.Index);
moel@130:         if (value.HasValue) {
moel@130:           sensor.Value = value + sensor.Parameters[0].Value;
moel@130:           ActivateSensor(sensor);
moel@130:         }
moel@130:       }
moel@130: 
moel@130:       foreach (Sensor sensor in fans) {
moel@228:         float? value = readFan(sensor.Index);
moel@130:         if (value.HasValue) {
moel@130:           sensor.Value = value;
moel@130:           if (value.Value > 0)
moel@130:             ActivateSensor(sensor);
moel@130:         }
moel@130:       }
moel@228: 
moel@323:       foreach (Sensor sensor in controls) {
moel@323:         float? value = readControl(sensor.Index);
moel@323:         if (value.HasValue) {
moel@323:           sensor.Value = value;
moel@323:           ActivateSensor(sensor);
moel@323:         }
moel@323:       }
moel@323: 
moel@228:       postUpdate();
moel@130:     }
moel@130: 
moel@323:     public override void Close() {
moel@323:       foreach (Sensor sensor in controls) {
moel@323:         // restore all controls back to default
moel@323:         superIO.SetControl(sensor.Index, null);
moel@323:       }
moel@323:       base.Close();
moel@323:     }
moel@323: 
moel@130:     private class Voltage {
moel@130:       public readonly string Name;
moel@130:       public readonly int Index;
moel@130:       public readonly float Ri;
moel@130:       public readonly float Rf;
moel@130:       public readonly float Vf;
moel@130:       public readonly bool Hidden;
moel@130: 
moel@202:       public Voltage(string name, int index) :
moel@202:         this(name, index, false) { }
moel@202:       
moel@130:       public Voltage(string name, int index, bool hidden) :
moel@130:         this(name, index, 0, 1, 0, hidden) { }
moel@202:       
moel@202:       public Voltage(string name, int index, float ri, float rf) :
moel@202:         this(name, index, ri, rf, 0, false) { }
moel@202:       
moel@202:       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false) 
moel@202:       
moel@195:       public Voltage(string name, int index, 
moel@202:         float ri, float rf, float vf, bool hidden) 
moel@195:       {
moel@130:         this.Name = name;
moel@130:         this.Index = index;
moel@130:         this.Ri = ri;
moel@130:         this.Rf = rf;
moel@130:         this.Vf = vf;
moel@130:         this.Hidden = hidden;
moel@130:       }
moel@130:     }
moel@130: 
moel@130:     private class Temperature {
moel@130:       public readonly string Name;
moel@130:       public readonly int Index;
moel@130: 
moel@167:       public Temperature(string name, int index) {
moel@130:         this.Name = name;
moel@130:         this.Index = index;
moel@130:       }
moel@130:     }
moel@130: 
moel@130:     private class Fan {
moel@130:       public readonly string Name;
moel@130:       public readonly int Index;
moel@130: 
moel@130:       public Fan(string name, int index) {
moel@130:         this.Name = name;
moel@130:         this.Index = index;
moel@130:       }
moel@130:     }
moel@323: 
moel@323:     private class Ctrl {
moel@323:       public readonly string Name;
moel@323:       public readonly int Index;
moel@323: 
moel@323:       public Ctrl(string name, int index) {
moel@323:         this.Name = name;
moel@323:         this.Index = index;
moel@323:       }
moel@323:     }
moel@130:   }
moel@130: }