moel@7: /*
moel@7:   
moel@7:   Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@7: 
moel@7:   The contents of this file are subject to the Mozilla Public License Version
moel@7:   1.1 (the "License"); you may not use this file except in compliance with
moel@7:   the License. You may obtain a copy of the License at
moel@7:  
moel@7:   http://www.mozilla.org/MPL/
moel@7: 
moel@7:   Software distributed under the License is distributed on an "AS IS" basis,
moel@7:   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@7:   for the specific language governing rights and limitations under the License.
moel@7: 
moel@7:   The Original Code is the Open Hardware Monitor code.
moel@7: 
moel@7:   The Initial Developer of the Original Code is 
moel@7:   Michael Möller <m.moeller@gmx.ch>.
moel@7:   Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@7:   the Initial Developer. All Rights Reserved.
moel@7: 
moel@7:   Contributor(s):
moel@7: 
moel@7:   Alternatively, the contents of this file may be used under the terms of
moel@7:   either the GNU General Public License Version 2 or later (the "GPL"), or
moel@7:   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@7:   in which case the provisions of the GPL or the LGPL are applicable instead
moel@7:   of those above. If you wish to allow use of your version of this file only
moel@7:   under the terms of either the GPL or the LGPL, and not to allow others to
moel@7:   use your version of this file under the terms of the MPL, indicate your
moel@7:   decision by deleting the provisions above and replace them with the notice
moel@7:   and other provisions required by the GPL or the LGPL. If you do not delete
moel@7:   the provisions above, a recipient may use your version of this file under
moel@7:   the terms of any one of the MPL, the GPL or the LGPL.
moel@7:  
moel@7: */
moel@7: 
moel@7: using System;
moel@7: using System.Collections.Generic;
moel@7: using System.Drawing;
moel@7: using System.Text;
moel@7: 
moel@7: namespace OpenHardwareMonitor.Hardware.LPC {
moel@7:   public class F71882FG  : IHardware {
moel@7: 
moel@7:     private string name;
moel@7:     private Image icon;
moel@7: 
moel@7:     private ushort address;
moel@7: 
moel@7:     private List<ISensor> active = new List<ISensor>();
moel@7: 
moel@7:     private Sensor[] temperatures;
moel@7:     private Sensor[] fans;
moel@7:     private Sensor[] voltages;
moel@7:     private float[] voltageGains;
moel@7: 
moel@7:     // Hardware Monitor
moel@7:     private const byte ADDRESS_REGISTER_OFFSET = 0x05;
moel@7:     private const byte DATA_REGISTER_OFFSET = 0x06;
moel@7: 
moel@7:     // Hardware Monitor Registers
moel@7:     private const byte VOLTAGE_BASE_REG = 0x20;
moel@7:     private const byte TEMPERATURE_BASE_REG = 0x72;
moel@7:     private byte[] FAN_TACHOMETER_REG = new byte[] { 0xA0, 0xB0, 0xC0, 0xD0 };
moel@7:     
moel@7:     private byte ReadByte(byte register) {
moel@7:       WinRing0.WriteIoPortByte(
moel@7:         (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
moel@7:       return WinRing0.ReadIoPortByte((ushort)(address + DATA_REGISTER_OFFSET));
moel@7:     }
moel@7: 
moel@7:     public F71882FG(ushort address) {
moel@7:       this.address = address;
moel@7: 
moel@7:       this.name = "Fintek F71882FG";
moel@7: 
moel@7:       temperatures = new Sensor[3];
moel@7:       for (int i = 0; i < temperatures.Length; i++)
moel@7:         temperatures[i] = new Sensor("Temperature #" + (i + 1), i,
moel@7:           SensorType.Temperature, this);
moel@7: 
moel@7:       fans = new Sensor[4];
moel@7:       for (int i = 0; i < fans.Length; i++)
moel@7:         fans[i] = new Sensor("Fan #" + (i + 1), i, SensorType.Fan, this);
moel@7: 
moel@7:       voltageGains = new float[] { 1, 0.5f, 1, 1, 1, 1, 1, 1, 1 };
moel@7:       voltages = new Sensor[4];
moel@7:       voltages[0] = new Sensor("VCC3V", 0, SensorType.Voltage, this);
moel@7:       voltages[1] = new Sensor("CPU VCore", 1, SensorType.Voltage, this);      
moel@7:       voltages[2] = new Sensor("VSB3V", 7, SensorType.Voltage, this);
moel@7:       voltages[3] = new Sensor("Battery", 8, SensorType.Voltage, this);
moel@7: 
moel@7:       this.icon = Utilities.EmbeddedResources.GetImage("chip.png");
moel@7:     }
moel@7: 
moel@7:     public string Name {
moel@7:       get { return name; }
moel@7:     }
moel@7: 
moel@7:     public string Identifier {
moel@7:       get { return "/lpc/f71882fg"; }
moel@7:     }
moel@7: 
moel@7:     public Image Icon {
moel@7:       get { return icon; }
moel@7:     }
moel@7: 
moel@7:     public ISensor[] Sensors {
moel@7:       get { return active.ToArray(); }
moel@7:     }
moel@7: 
moel@7:     public string GetReport() {
moel@7:       StringBuilder r = new StringBuilder();
moel@7: 
moel@7:       r.AppendLine("LPC F71882FG");
moel@7:       r.AppendLine();
moel@7:       r.Append("Base Adress: 0x"); r.AppendLine(address.ToString("X4"));
moel@7:       r.AppendLine();
moel@7:       r.AppendLine("Hardware Monitor Registers");
moel@7:       r.AppendLine();
moel@7: 
moel@7:       r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
moel@7:       r.AppendLine();
moel@7:       for (int i = 0; i <= 0xF; i++) {
moel@7:         r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append("  ");
moel@7:         for (int j = 0; j <= 0xF; j++) {
moel@7:           r.Append(" ");
moel@7:           r.Append(ReadByte((byte)((i << 4) | j)).ToString("X2"));
moel@7:         }
moel@7:         r.AppendLine();
moel@7:       }
moel@7:       r.AppendLine();
moel@7:       return r.ToString();
moel@7:     }
moel@7: 
moel@7:     public void Update() {
moel@7: 
moel@7:       foreach (Sensor sensor in voltages) {
moel@7:         int value = ReadByte((byte)(VOLTAGE_BASE_REG + sensor.Index));
moel@7:         sensor.Value = voltageGains[sensor.Index] * 0.001f * (value << 4);
moel@7:         if (sensor.Value > 0)
moel@7:           ActivateSensor(sensor);
moel@7:         else
moel@7:           DeactivateSensor(sensor);
moel@7:       }
moel@7: 
moel@7:       foreach (Sensor sensor in temperatures) {
moel@7:         int value = ReadByte((byte)(TEMPERATURE_BASE_REG + 2 * sensor.Index));
moel@7:         sensor.Value = value;
moel@7:         if (value < 254)
moel@7:           ActivateSensor(sensor);
moel@7:         else
moel@7:           DeactivateSensor(sensor);
moel@7:       }
moel@7: 
moel@7:       foreach (Sensor sensor in fans) {
moel@7:         int value = ReadByte(FAN_TACHOMETER_REG[sensor.Index]) << 8;
moel@7:         value |= ReadByte((byte)(FAN_TACHOMETER_REG[sensor.Index] + 1));
moel@7: 
moel@7:         if (value > 0) {
moel@7:           sensor.Value = (value < 0x0fff) ? 1.5e6f / value : 0;
moel@7:           ActivateSensor(sensor);
moel@7:         } else {
moel@7:           DeactivateSensor(sensor);
moel@7:         }
moel@7:       }      
moel@7:     }
moel@7: 
moel@7:     private void ActivateSensor(Sensor sensor) {
moel@7:       if (!active.Contains(sensor)) {
moel@7:         active.Add(sensor);
moel@7:         SensorAdded(sensor);
moel@7:       }
moel@7:     }
moel@7: 
moel@7:     private void DeactivateSensor(Sensor sensor) {
moel@7:       if (active.Contains(sensor)) {
moel@7:         active.Remove(sensor);
moel@7:         SensorRemoved(sensor);
moel@7:       }
moel@7:     }
moel@7: 
moel@7:     public event SensorEventHandler SensorAdded;
moel@7:     public event SensorEventHandler SensorRemoved;
moel@7: 
moel@7:   }
moel@7: }