moel@1: /*
moel@1:   
moel@1:   Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@1: 
moel@1:   The contents of this file are subject to the Mozilla Public License Version
moel@1:   1.1 (the "License"); you may not use this file except in compliance with
moel@1:   the License. You may obtain a copy of the License at
moel@1:  
moel@1:   http://www.mozilla.org/MPL/
moel@1: 
moel@1:   Software distributed under the License is distributed on an "AS IS" basis,
moel@1:   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@1:   for the specific language governing rights and limitations under the License.
moel@1: 
moel@1:   The Original Code is the Open Hardware Monitor code.
moel@1: 
moel@1:   The Initial Developer of the Original Code is 
moel@1:   Michael Möller <m.moeller@gmx.ch>.
moel@1:   Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@1:   the Initial Developer. All Rights Reserved.
moel@1: 
moel@1:   Contributor(s):
moel@1: 
moel@1:   Alternatively, the contents of this file may be used under the terms of
moel@1:   either the GNU General Public License Version 2 or later (the "GPL"), or
moel@1:   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@1:   in which case the provisions of the GPL or the LGPL are applicable instead
moel@1:   of those above. If you wish to allow use of your version of this file only
moel@1:   under the terms of either the GPL or the LGPL, and not to allow others to
moel@1:   use your version of this file under the terms of the MPL, indicate your
moel@1:   decision by deleting the provisions above and replace them with the notice
moel@1:   and other provisions required by the GPL or the LGPL. If you do not delete
moel@1:   the provisions above, a recipient may use your version of this file under
moel@1:   the terms of any one of the MPL, the GPL or the LGPL.
moel@1:  
moel@1: */
moel@1: 
moel@1: using System;
moel@1: using System.Collections.Generic;
moel@1: using System.Configuration;
moel@1: using System.Drawing;
moel@1: using System.Text;
moel@1: 
moel@1: namespace OpenHardwareMonitor.Hardware.TBalancer {
moel@1:   public class TBalancer : IHardware {
moel@1: 
moel@87:     private int portIndex;
moel@87:     private FT_HANDLE handle;
moel@1:     private Image icon;
moel@33:     private byte protocolVersion;
moel@1:     private Sensor[] digitalTemperatures = new Sensor[8];
moel@1:     private Sensor[] analogTemperatures = new Sensor[4];
moel@57:     private Sensor[] sensorhubTemperatures = new Sensor[6];
moel@57:     private Sensor[] sensorhubFlows = new Sensor[2];
moel@1:     private Sensor[] fans = new Sensor[4];
moel@118:     private Sensor[] controls = new Sensor[4];
moel@57:     private Sensor[] miniNGTemperatures = new Sensor[4];
moel@57:     private Sensor[] miniNGFans = new Sensor[4];
moel@1:     private List<ISensor> active = new List<ISensor>();
moel@1:     private List<ISensor> deactivating = new List<ISensor>();
moel@57:     private int[] primaryData = new int[0];
moel@57:     private int[] alternativeData = new int[0];
moel@1: 
moel@1:     public const byte STARTFLAG = 100;
moel@57:     public const byte ENDFLAG = 254;
moel@57: 
moel@57:     private delegate void MethodDelegate();
moel@57:     private MethodDelegate alternativeRequest;    
moel@1: 
moel@87:     public TBalancer(int portIndex, byte protocolVersion) {
moel@87:       this.portIndex = portIndex;
moel@57:       this.icon = Utilities.EmbeddedResources.GetImage("bigng.png");
moel@33:       this.protocolVersion = protocolVersion;
moel@1: 
moel@63:       ParameterDescription[] parameter = new ParameterDescription[] {
moel@122:         new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@63:       };
moel@57:       int offset = 0;
moel@57:       for (int i = 0; i < digitalTemperatures.Length; i++)
moel@88:         digitalTemperatures[i] = new Sensor("Digital Sensor " + i,
moel@134:           offset + i, SensorType.Temperature, this, parameter);
moel@57:       offset += digitalTemperatures.Length;
moel@57: 
moel@57:       for (int i = 0; i < analogTemperatures.Length; i++)
moel@88:         analogTemperatures[i] = new Sensor("Analog Sensor " + (i + 1),
moel@134:           offset + i, SensorType.Temperature, this, parameter);
moel@57:       offset += analogTemperatures.Length;
moel@57: 
moel@57:       for (int i = 0; i < sensorhubTemperatures.Length; i++)
moel@88:         sensorhubTemperatures[i] = new Sensor("Sensorhub Sensor " + i,
moel@134:           offset + i, SensorType.Temperature, this, parameter);
moel@57:       offset += sensorhubTemperatures.Length;
moel@57: 
moel@57:       for (int i = 0; i < miniNGTemperatures.Length; i++)
moel@63:         miniNGTemperatures[i] = new Sensor("miniNG #" + (i / 2 + 1) +
moel@134:           " Sensor " + (i % 2 + 1), offset + i, SensorType.Temperature, 
moel@63:           this, parameter);
moel@57:       offset += miniNGTemperatures.Length;
moel@57: 
moel@118:       for (int i = 0; i < sensorhubFlows.Length; i++)
moel@118:         sensorhubFlows[i] = new Sensor("Flowmeter " + (i + 1),
moel@134:           i, SensorType.Flow, this, new ParameterDescription[] {
moel@118:             new ParameterDescription("Impulse Rate", 
moel@118:               "The impulse rate of the flowmeter in pulses/L", 509)
moel@118:           });
moel@118: 
moel@118:       for (int i = 0; i < controls.Length; i++) {
moel@134:         controls[i] = new Sensor("Fan Channel " + i, i, 
moel@118:           SensorType.Control, this, null);
moel@118:         ActivateSensor(controls[i]);
moel@118:       }
moel@118: 
moel@57:       alternativeRequest = new MethodDelegate(DelayedAlternativeRequest);
moel@57: 
moel@87:       Open();
moel@87:       Update(); 
moel@1:     }
moel@1: 
moel@1:     private void ActivateSensor(Sensor sensor) {
moel@1:       deactivating.Remove(sensor);
moel@1:       if (!active.Contains(sensor)) {
moel@1:         active.Add(sensor);
moel@15:         if (SensorAdded != null)
moel@15:           SensorAdded(sensor);
moel@1:       }      
moel@1:     }
moel@1: 
moel@1:     private void DeactivateSensor(Sensor sensor) {
moel@1:       if (deactivating.Contains(sensor)) {
moel@1:         active.Remove(sensor);
moel@1:         deactivating.Remove(sensor);
moel@15:         if (SensorRemoved != null)
moel@15:           SensorRemoved(sensor);
moel@1:       } else if (active.Contains(sensor)) {
moel@1:         deactivating.Add(sensor);
moel@1:       }     
moel@1:     }
moel@1: 
moel@57:     private void ReadminiNG(int[] data, int number) {
moel@57:       int offset = 1 + number * 65;
moel@57: 
moel@57:       if (data[offset + 61] != ENDFLAG)
moel@57:         return;
moel@57: 
moel@57:       for (int i = 0; i < 2; i++) {
moel@57:         Sensor sensor = miniNGTemperatures[number * 2 + i];
moel@57:         if (data[offset + 7 + i] > 0) {
moel@63:           sensor.Value = 0.5f * data[offset + 7 + i] + 
moel@63:             sensor.Parameters[0].Value;
moel@57:           ActivateSensor(sensor);
moel@57:         } else {
moel@57:           DeactivateSensor(sensor);
moel@57:         }
moel@57:       }
moel@57: 
moel@57:       for (int i = 0; i < 2; i++) {
moel@57:         float maxRPM = 20.0f * data[offset + 44 + 2 * i];
moel@57: 
moel@57:         if (miniNGFans[number * 2 + i] == null)
moel@57:           miniNGFans[number * 2 + i] = 
moel@88:             new Sensor("miniNG #" + (number + 1) + " Fan Channel " + (i + 1),
moel@134:             4 + number * 2 + i, SensorType.Fan, this, null);
moel@57:         
moel@57:         Sensor sensor = miniNGFans[number * 2 + i];
moel@57: 
moel@57:         sensor.Value = 20.0f * data[offset + 43 + 2 * i];
moel@57:         ActivateSensor(sensor);
moel@57:       }
moel@57:     }
moel@57: 
moel@1:     private void ReadData() {
moel@1:       int[] data = new int[285];
moel@1:       for (int i = 0; i < data.Length; i++)
moel@87:         data[i] = FTD2XX.ReadByte(handle);
moel@1: 
moel@57:       if (data[0] != STARTFLAG) {
moel@87:         FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_RX);   
moel@1:         return;
moel@1:       }
moel@1: 
moel@73:       if (data[1] == 255 || data[1] == 88) { // bigNG
moel@57: 
moel@57:         if (data[274] != protocolVersion) 
moel@57:           return;
moel@57: 
moel@57:         this.primaryData = data;
moel@57: 
moel@57:         for (int i = 0; i < digitalTemperatures.Length; i++)
moel@57:           if (data[238 + i] > 0) {
moel@63:             digitalTemperatures[i].Value = 0.5f * data[238 + i] + 
moel@63:               digitalTemperatures[i].Parameters[0].Value;
moel@57:             ActivateSensor(digitalTemperatures[i]);
moel@57:           } else {
moel@57:             DeactivateSensor(digitalTemperatures[i]);
moel@57:           }
moel@57: 
moel@57:         for (int i = 0; i < analogTemperatures.Length; i++)
moel@57:           if (data[260 + i] > 0) {
moel@63:             analogTemperatures[i].Value = 0.5f * data[260 + i] +
moel@63:               analogTemperatures[i].Parameters[0].Value;
moel@57:             ActivateSensor(analogTemperatures[i]);
moel@57:           } else {
moel@57:             DeactivateSensor(analogTemperatures[i]);
moel@57:           }
moel@57: 
moel@57:         for (int i = 0; i < sensorhubTemperatures.Length; i++)
moel@57:           if (data[246 + i] > 0) {
moel@63:             sensorhubTemperatures[i].Value = 0.5f * data[246 + i] +
moel@63:               sensorhubTemperatures[i].Parameters[0].Value;
moel@57:             ActivateSensor(sensorhubTemperatures[i]);
moel@57:           } else {
moel@57:             DeactivateSensor(sensorhubTemperatures[i]);
moel@57:           }
moel@57: 
moel@57:         for (int i = 0; i < sensorhubFlows.Length; i++)
moel@57:           if (data[231 + i] > 0 && data[234] > 0) {
moel@66:             float pulsesPerSecond = (data[231 + i] * 4.0f) / data[234];
moel@63:             float pulsesPerLiter = sensorhubFlows[i].Parameters[0].Value;
moel@57:             sensorhubFlows[i].Value = pulsesPerSecond * 3600 / pulsesPerLiter;
moel@57:             ActivateSensor(sensorhubFlows[i]);
moel@57:           } else {
moel@57:             DeactivateSensor(sensorhubFlows[i]);
moel@57:           }
moel@86:         
moel@57:         for (int i = 0; i < fans.Length; i++) {
moel@57:           float maxRPM = 11.5f * ((data[149 + 2 * i] << 8) | data[148 + 2 * i]);
moel@57: 
moel@57:           if (fans[i] == null)
moel@134:             fans[i] = new Sensor("Fan Channel " + i, i, SensorType.Fan,
moel@63:               this, new ParameterDescription[] {
moel@63:                 new ParameterDescription("MaxRPM", 
moel@63:                   "Maximum revolutions per minute (RPM) of the fan.", maxRPM)
moel@63:               });
moel@57: 
moel@118:           float value;
moel@118:           if ((data[136] & (1 << i)) == 0)  // pwm mode
moel@118:             value = 0.02f * data[137 + i];
moel@63:           else // analog mode
moel@118:             value = 0.01f * data[141 + i];
moel@118:           
moel@118:           fans[i].Value = fans[i].Parameters[0].Value * value;
moel@57:           ActivateSensor(fans[i]);
moel@118: 
moel@118:           controls[i].Value = 100 * value;          
moel@1:         }
moel@1: 
moel@57:       } else if (data[1] == 253) { // miniNG #1
moel@57:         this.alternativeData = data;
moel@1: 
moel@57:         ReadminiNG(data, 0);        
moel@57:               
moel@57:         if (data[66] == 252)  // miniNG #2
moel@57:           ReadminiNG(data, 1);
moel@57:       } 
moel@1:     }
moel@1: 
moel@1:     public Image Icon {
moel@1:       get { return icon; }
moel@1:     }
moel@1: 
moel@1:     public string Name {
moel@1:       get { return "T-Balancer bigNG"; }
moel@1:     }
moel@1: 
moel@109:     public Identifier Identifier {
moel@109:       get { return new Identifier("bigng", this.portIndex.ToString()); }
moel@1:     }
moel@1: 
moel@64:     public IHardware[] SubHardware {
moel@64:       get { return new IHardware[0]; }
moel@64:     }
moel@64: 
moel@1:     public ISensor[] Sensors {
moel@1:       get { return active.ToArray(); }
moel@1:     }
moel@1: 
moel@1:     public string GetReport() {
moel@1:       StringBuilder r = new StringBuilder();
moel@1: 
moel@1:       r.AppendLine("T-Balancer bigNG");
moel@1:       r.AppendLine();
moel@87:       r.Append("Port Index: "); r.AppendLine(portIndex.ToString());
moel@1:       r.AppendLine();
moel@57: 
moel@57:       r.AppendLine("Primary System Information Answer");
moel@1:       r.AppendLine();
moel@1:       r.AppendLine("       00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
moel@1:       r.AppendLine();
moel@1:       for (int i = 0; i <= 0x11; i++) {
moel@1:         r.Append(" "); r.Append((i << 4).ToString("X3")); r.Append("  ");
moel@1:         for (int j = 0; j <= 0xF; j++) {
moel@1:           int index = ((i << 4) | j);
moel@57:           if (index < primaryData.Length) {
moel@1:             r.Append(" ");
moel@57:             r.Append(primaryData[index].ToString("X2"));
moel@1:           }          
moel@1:         }
moel@1:         r.AppendLine();
moel@1:       }
moel@1:       r.AppendLine();
moel@1: 
moel@57:       if (alternativeData.Length > 0) {
moel@57:         r.AppendLine("Alternative System Information Answer");
moel@57:         r.AppendLine();
moel@57:         r.AppendLine("       00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
moel@57:         r.AppendLine();
moel@57:         for (int i = 0; i <= 0x11; i++) {
moel@57:           r.Append(" "); r.Append((i << 4).ToString("X3")); r.Append("  ");
moel@57:           for (int j = 0; j <= 0xF; j++) {
moel@57:             int index = ((i << 4) | j);
moel@57:             if (index < alternativeData.Length) {
moel@57:               r.Append(" ");
moel@57:               r.Append(alternativeData[index].ToString("X2"));
moel@57:             }
moel@57:           }
moel@57:           r.AppendLine();
moel@57:         }
moel@57:         r.AppendLine();
moel@57:       }
moel@57: 
moel@1:       return r.ToString();
moel@1:     }
moel@1: 
moel@57:     private void DelayedAlternativeRequest() {
moel@87:       System.Threading.Thread.Sleep(500);      
moel@87:       FTD2XX.Write(handle, new byte[] { 0x37 });
moel@57:     }
moel@57: 
moel@87:     public void Open() {
moel@87:       FTD2XX.FT_Open(portIndex, out handle); 
moel@87:       FTD2XX.FT_SetBaudRate(handle, 19200);
moel@87:       FTD2XX.FT_SetDataCharacteristics(handle, 8, 1, 0);
moel@87:       FTD2XX.FT_SetFlowControl(handle, FT_FLOW_CONTROL.FT_FLOW_RTS_CTS, 0x11,
moel@87:         0x13);
moel@87:       FTD2XX.FT_SetTimeouts(handle, 1000, 1000);
moel@87:       FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_ALL);
moel@87:     }
moel@57: 
moel@87:     public void Update() {
moel@87:       while (FTD2XX.BytesToRead(handle) >= 285)
moel@87:         ReadData();
moel@87:       if (FTD2XX.BytesToRead(handle) == 1)
moel@87:         FTD2XX.ReadByte(handle);
moel@87: 
moel@87:       FTD2XX.Write(handle, new byte[] { 0x38 });
moel@87:       alternativeRequest.BeginInvoke(null, null);
moel@1:     }
moel@1: 
moel@1:     public void Close() {
moel@87:       FTD2XX.FT_Close(handle);
moel@1:     }
moel@1: 
moel@1:     public event SensorEventHandler SensorAdded;
moel@1:     public event SensorEventHandler SensorRemoved;
moel@110: 
moel@110:     public void Accept(IVisitor visitor) {
moel@110:       visitor.VisitHardware(this);
moel@110:     }
moel@110: 
moel@110:     public void Traverse(IVisitor visitor) { }
moel@1:   }
moel@1: }