moel@1: /*
moel@1:   
moel@1:   Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@1: 
moel@1:   The contents of this file are subject to the Mozilla Public License Version
moel@1:   1.1 (the "License"); you may not use this file except in compliance with
moel@1:   the License. You may obtain a copy of the License at
moel@1:  
moel@1:   http://www.mozilla.org/MPL/
moel@1: 
moel@1:   Software distributed under the License is distributed on an "AS IS" basis,
moel@1:   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@1:   for the specific language governing rights and limitations under the License.
moel@1: 
moel@1:   The Original Code is the Open Hardware Monitor code.
moel@1: 
moel@1:   The Initial Developer of the Original Code is 
moel@1:   Michael Möller <m.moeller@gmx.ch>.
moel@1:   Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@1:   the Initial Developer. All Rights Reserved.
moel@1: 
moel@1:   Contributor(s):
moel@1: 
moel@1:   Alternatively, the contents of this file may be used under the terms of
moel@1:   either the GNU General Public License Version 2 or later (the "GPL"), or
moel@1:   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@1:   in which case the provisions of the GPL or the LGPL are applicable instead
moel@1:   of those above. If you wish to allow use of your version of this file only
moel@1:   under the terms of either the GPL or the LGPL, and not to allow others to
moel@1:   use your version of this file under the terms of the MPL, indicate your
moel@1:   decision by deleting the provisions above and replace them with the notice
moel@1:   and other provisions required by the GPL or the LGPL. If you do not delete
moel@1:   the provisions above, a recipient may use your version of this file under
moel@1:   the terms of any one of the MPL, the GPL or the LGPL.
moel@1:  
moel@1: */
moel@1: 
moel@1: using System;
moel@1: using System.Collections.Generic;
moel@1: using System.Drawing;
moel@24: using System.Diagnostics;
moel@1: using System.Text;
moel@1: 
moel@1: namespace OpenHardwareMonitor.Hardware.CPU {
moel@1:   
moel@31:   public class AMD10CPU : Hardware, IHardware {
moel@1:     private string name;
moel@1:     private Image icon;
moel@1: 
moel@100:     private int processorIndex;
moel@1:     private uint pciAddress;
moel@1: 
moel@1:     private Sensor coreTemperature;
moel@24:     private Sensor totalLoad;
moel@24:     private Sensor[] coreLoads;
moel@24: 
moel@26:     private CPULoad cpuLoad;
moel@1: 
moel@1:     private const ushort PCI_AMD_VENDOR_ID = 0x1022;
moel@1:     private const ushort PCI_AMD_10H_MISCELLANEOUS_DEVICE_ID = 0x1203;
moel@42:     private const ushort PCI_AMD_11H_MISCELLANEOUS_DEVICE_ID = 0x1303;
moel@1:     private const uint REPORTED_TEMPERATURE_CONTROL_REGISTER = 0xA4;
moel@1: 
moel@100:     public AMD10CPU(int processorIndex, CPUID[][] cpuid) {
moel@1: 
moel@100:       this.processorIndex = processorIndex;
moel@90:       this.name = cpuid[0][0].Name;
moel@90:       this.icon = Utilities.EmbeddedResources.GetImage("cpu.png");
moel@90: 
moel@90:       int coreCount = cpuid.Length;
moel@24: 
moel@24:       totalLoad = new Sensor("CPU Total", 0, SensorType.Load, this);
moel@24: 
moel@24:       coreLoads = new Sensor[coreCount];
moel@26:       for (int i = 0; i < coreCount; i++) 
moel@24:         coreLoads[i] = new Sensor("Core #" + (i + 1), i + 1,
moel@24:           SensorType.Load, this);
moel@26: 
moel@90:       cpuLoad = new CPULoad(cpuid);
moel@26:       if (cpuLoad.IsAvailable) {
moel@26:         foreach (Sensor sensor in coreLoads)
moel@26:           ActivateSensor(sensor);
moel@26:         ActivateSensor(totalLoad);
moel@26:       }    
moel@1:       
moel@1:       // AMD family 10h processors support only one temperature sensor
moel@22:       coreTemperature = new Sensor(
moel@63:         "Core" + (coreCount > 1 ? " #1 - #" + coreCount : ""), 0, null,
moel@63:         SensorType.Temperature, this, new ParameterDescription[] {
moel@63:             new ParameterDescription("Offset", "Temperature offset.", 0)
moel@63:           });
moel@1: 
moel@100:       pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,
moel@100:         PCI_AMD_10H_MISCELLANEOUS_DEVICE_ID, (byte)processorIndex);
moel@42:       if (pciAddress == 0xFFFFFFFF) 
moel@42:         pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,
moel@100:           PCI_AMD_11H_MISCELLANEOUS_DEVICE_ID, (byte)processorIndex);
moel@42: 
moel@1:       Update();                   
moel@1:     }
moel@1: 
moel@1:     public string Name {
moel@1:       get { return name; }
moel@1:     }
moel@1: 
moel@1:     public string Identifier {
moel@100:       get { return "/amdcpu/" + processorIndex; }
moel@1:     }
moel@1: 
moel@1:     public Image Icon {
moel@1:       get { return icon; }
moel@1:     }
moel@1: 
moel@1:     public string GetReport() {
moel@1:       return null;
moel@1:     }
moel@1: 
moel@1:     public void Update() {
moel@42:       if (pciAddress != 0xFFFFFFFF) {
moel@42:         uint value;
moel@42:         if (WinRing0.ReadPciConfigDwordEx(pciAddress,
moel@42:           REPORTED_TEMPERATURE_CONTROL_REGISTER, out value)) {
moel@63:           coreTemperature.Value = ((value >> 21) & 0x7FF) / 8.0f +
moel@63:             coreTemperature.Parameters[0].Value;
moel@42:           ActivateSensor(coreTemperature);
moel@42:         } else {
moel@42:           DeactivateSensor(coreTemperature);
moel@42:         }
moel@24:       }
moel@24: 
moel@26:       if (cpuLoad.IsAvailable) {
moel@26:         cpuLoad.Update();
moel@26:         for (int i = 0; i < coreLoads.Length; i++)
moel@26:           coreLoads[i].Value = cpuLoad.GetCoreLoad(i);
moel@26:         totalLoad.Value = cpuLoad.GetTotalLoad();
moel@25:       }
moel@1:     }
moel@1:   }
moel@1: }