moel@245: /*
moel@245:   
moel@245:   Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@245: 
moel@245:   The contents of this file are subject to the Mozilla Public License Version
moel@245:   1.1 (the "License"); you may not use this file except in compliance with
moel@245:   the License. You may obtain a copy of the License at
moel@245:  
moel@245:   http://www.mozilla.org/MPL/
moel@245: 
moel@245:   Software distributed under the License is distributed on an "AS IS" basis,
moel@245:   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@245:   for the specific language governing rights and limitations under the License.
moel@245: 
moel@245:   The Original Code is the Open Hardware Monitor code.
moel@245: 
moel@245:   The Initial Developer of the Original Code is 
moel@245:   Michael Möller <m.moeller@gmx.ch>.
moel@265:   Portions created by the Initial Developer are Copyright (C) 2010-2011
moel@245:   the Initial Developer. All Rights Reserved.
moel@245: 
moel@245:   Contributor(s):
moel@245: 
moel@245:   Alternatively, the contents of this file may be used under the terms of
moel@245:   either the GNU General Public License Version 2 or later (the "GPL"), or
moel@245:   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@245:   in which case the provisions of the GPL or the LGPL are applicable instead
moel@245:   of those above. If you wish to allow use of your version of this file only
moel@245:   under the terms of either the GPL or the LGPL, and not to allow others to
moel@245:   use your version of this file under the terms of the MPL, indicate your
moel@245:   decision by deleting the provisions above and replace them with the notice
moel@245:   and other provisions required by the GPL or the LGPL. If you do not delete
moel@245:   the provisions above, a recipient may use your version of this file under
moel@245:   the terms of any one of the MPL, the GPL or the LGPL.
moel@245:  
moel@245: */
moel@245: 
moel@245: using System.Globalization;
moel@245: using System.Text;
moel@245: 
moel@245: namespace OpenHardwareMonitor.Hardware.LPC {
moel@245:   internal class NCT677X : ISuperIO {
moel@245: 
moel@245:     private readonly ushort port;
moel@245:     private readonly byte revision;
moel@245: 
moel@245:     private readonly Chip chip;
moel@245: 
moel@245:     private readonly float?[] voltages = new float?[9];
moel@245:     private readonly float?[] temperatures = new float?[3];
moel@265:     private readonly float?[] fans = new float?[0];
moel@245: 
moel@245:     // Hardware Monitor
moel@245:     private const uint ADDRESS_REGISTER_OFFSET = 0x05;
moel@245:     private const uint DATA_REGISTER_OFFSET = 0x06;
moel@245:     private const byte BANK_SELECT_REGISTER = 0x4E;
moel@245: 
moel@245:     private byte ReadByte(ushort address) {
moel@245:       byte bank = (byte)(address >> 8);
moel@245:       byte register = (byte)(address & 0xFF);
moel@245:       Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, BANK_SELECT_REGISTER);
moel@245:       Ring0.WriteIoPort(port + DATA_REGISTER_OFFSET, bank);
moel@245:       Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, register);
moel@245:       return Ring0.ReadIoPort(port + DATA_REGISTER_OFFSET);
moel@246:     } 
moel@245: 
moel@245:     // Consts 
moel@245:     private const ushort NUVOTON_VENDOR_ID = 0x5CA3;
moel@245: 
moel@245:     // Hardware Monitor Registers    
moel@245:     private const ushort VENDOR_ID_HIGH_REGISTER = 0x804F;
moel@245:     private const ushort VENDOR_ID_LOW_REGISTER = 0x004F;
moel@245:     private const ushort VOLTAGE_VBAT_REG = 0x0551;
moel@245: 
moel@245:     private readonly ushort[] TEMPERATURE_REG = 
moel@245:       { 0x150, 0x250, 0x27, 0x62B, 0x62C, 0x62D };
moel@245:     private readonly ushort[] TEMPERATURE_HALF_REG = 
moel@245:       { 0x151, 0x251, 0, 0x62E, 0x62E, 0x62E };    
moel@245:     private readonly ushort[] TEMPERATURE_SRC_REG = 
moel@245:       { 0x621, 0x622, 0x623, 0x624, 0x625, 0x626 };
moel@245:     private readonly int[] TEMPERATURE_HALF_BIT = { 7, 7, -1, 0, 1, 2 };
moel@245:     private readonly ushort[] VOLTAGE_REG = 
moel@245:       { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x550, 0x551 };
moel@265:     private readonly ushort[] FAN_RPM_REG = 
moel@265:       { 0x656, 0x658, 0x65A, 0x65C, 0x65E};
moel@265: 
moel@265:     private readonly int minFanRPM;
moel@245: 
moel@245:     private enum TemperatureSource : byte {
moel@245:       SYSTIN = 1,
moel@245:       CPUTIN = 2,
moel@245:       AUXTIN = 3,
moel@245:       SMBUSMASTER = 4,
moel@245:       PECI0 = 5, 
moel@245:       PECI1 = 6, 
moel@245:       PECI2 = 7,
moel@245:       PECI3 = 8,
moel@245:       PECI4 = 9,
moel@245:       PECI5 = 10,
moel@245:       PECI6 = 11,
moel@245:       PECI7 = 12,
moel@245:       PCH_CHIP_CPU_MAX_TEMP = 13,
moel@245:       PCH_CHIP_TEMP = 14,
moel@245:       PCH_CPU_TEMP = 15,
moel@245:       PCH_MCH_TEMP = 16, 
moel@245:       PCH_DIM0_TEMP = 17,
moel@245:       PCH_DIM1_TEMP = 18,
moel@245:       PCH_DIM2_TEMP = 19,
moel@245:       PCH_DIM3_TEMP = 20
moel@245:     }
moel@245: 
moel@245:     public NCT677X(Chip chip, byte revision, ushort port) {
moel@245:       this.chip = chip;
moel@245:       this.revision = revision;
moel@245:       this.port = port;
moel@245: 
moel@245:       if (!IsNuvotonVendor())
moel@265:         return;
moel@265: 
moel@265:       switch (chip) {
moel@265:         case LPC.Chip.NCT6771F:
moel@265:           fans = new float?[4];
moel@265:           // min value RPM value with 16-bit fan counter
moel@265:           minFanRPM = (int)(1.35e6 / 0xFFFF);
moel@265:           break;
moel@265:         case LPC.Chip.NCT6776F:
moel@265:           fans = new float?[5];
moel@265:           // min value RPM value with 13-bit fan counter
moel@265:           minFanRPM = (int)(1.35e6 / 0x1FFF);
moel@265:           break;        
moel@265:       }
moel@245:     }
moel@245: 
moel@245:     private bool IsNuvotonVendor() {
moel@245:       return ((ReadByte(VENDOR_ID_HIGH_REGISTER) << 8) |
moel@245:         ReadByte(VENDOR_ID_LOW_REGISTER)) == NUVOTON_VENDOR_ID;
moel@245:     }
moel@245: 
moel@245:     public byte? ReadGPIO(int index) {
moel@245:       return null;
moel@245:     }
moel@245: 
moel@245:     public void WriteGPIO(int index, byte value) { }
moel@245: 
moel@245:     public Chip Chip { get { return chip; } }
moel@245:     public float?[] Voltages { get { return voltages; } }
moel@245:     public float?[] Temperatures { get { return temperatures; } }
moel@245:     public float?[] Fans { get { return fans; } }
moel@245: 
moel@245:     public void Update() {
moel@245:       if (!Ring0.WaitIsaBusMutex(10))
moel@245:         return;
moel@245: 
moel@245:       for (int i = 0; i < voltages.Length; i++) {
moel@245:         float value = 0.008f * ReadByte(VOLTAGE_REG[i]);
moel@245:         bool valid = value > 0;
moel@245: 
moel@245:         // check if battery voltage monitor is enabled
moel@245:         if (valid && VOLTAGE_REG[i] == VOLTAGE_VBAT_REG) 
moel@245:           valid = (ReadByte(0x005D) & 0x01) > 0;
moel@245: 
moel@245:         voltages[i] = valid ? value : (float?)null;
moel@245:       }
moel@245: 
moel@245:       for (int i = 0; i < TEMPERATURE_REG.Length; i++) {
moel@246:         int value = ((sbyte)ReadByte(TEMPERATURE_REG[i])) << 1;
moel@245:         if (TEMPERATURE_HALF_BIT[i] > 0) {
moel@246:           value |= ((ReadByte(TEMPERATURE_HALF_REG[i]) >>
moel@245:             TEMPERATURE_HALF_BIT[i]) & 0x1);
moel@245:         }
moel@245: 
moel@245:         TemperatureSource source = (TemperatureSource)
moel@245:           ReadByte(TEMPERATURE_SRC_REG[i]);
moel@245: 
moel@246:         float? temperature = 0.5f * value;
moel@246:         if (temperature > 125 || temperature < -55)
moel@246:           temperature = null;
moel@246: 
moel@245:         switch (source) {
moel@246:           case TemperatureSource.CPUTIN: temperatures[0] = temperature; break;
moel@246:           case TemperatureSource.AUXTIN: temperatures[1] = temperature; break;
moel@246:           case TemperatureSource.SYSTIN: temperatures[2] = temperature; break;
moel@245:         }
moel@245:       }
moel@245: 
moel@245:       for (int i = 0; i < fans.Length; i++) {
moel@245:         byte high = ReadByte(FAN_RPM_REG[i]);
moel@245:         byte low = ReadByte((ushort)(FAN_RPM_REG[i] + 1));
moel@265:         int value = (high << 8) | low;
moel@265: 
moel@265:         fans[i] = value > minFanRPM ? value : 0;
moel@245:       }
moel@245: 
moel@245:       Ring0.ReleaseIsaBusMutex();
moel@245:     }
moel@245: 
moel@245:     public string GetReport() {
moel@245:       StringBuilder r = new StringBuilder();
moel@245: 
moel@245:       r.AppendLine("LPC " + this.GetType().Name);
moel@245:       r.AppendLine();
moel@245:       r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
moel@245:       r.Append("Chip revision: 0x");
moel@245:       r.AppendLine(revision.ToString("X", CultureInfo.InvariantCulture));
moel@245:       r.Append("Base Adress: 0x");
moel@245:       r.AppendLine(port.ToString("X4", CultureInfo.InvariantCulture));
moel@245:       r.AppendLine();
moel@245: 
moel@245:       if (!Ring0.WaitIsaBusMutex(100))
moel@245:         return r.ToString();
moel@245: 
moel@246:       ushort[] addresses = new ushort[] { 
moel@246:         0x000, 0x010, 0x020, 0x030, 0x040, 0x050, 0x060, 0x070,
moel@246:         0x100, 0x110, 0x120, 0x130, 0x140, 0x150, 
moel@246:         0x200,        0x220, 0x230, 0x240, 0x250,
moel@246:         0x300,        0x320, 0x330, 0x340, 
moel@246:         0x400, 0x410, 0x420,        0x440, 0x450, 0x460, 
moel@246:         0x500,                             0x550, 
moel@246:         0x600, 0x610 ,0x620, 0x630, 0x640, 0x650, 0x660, 0x670, 
moel@246:         0xA00, 0xA10, 0xA20, 0xA30,        0xA50, 0xA60, 0xA70, 
moel@246:         0xB00, 0xB10, 0xB20, 0xB30,        0xB50, 0xB60, 0xB70, 
moel@246:         0xC00, 0xC10, 0xC20, 0xC30,        0xC50, 0xC60, 0xC70,
moel@246:         0xD00, 0xD10, 0xD20, 0xD30,        0xD50, 0xD60, 
moel@246:         0xE00, 0xE10, 0xE20, 0xE30, 
moel@246:         0xF00, 0xF10, 0xF20, 0xF30};
moel@246: 
moel@245:       r.AppendLine("Hardware Monitor Registers");
moel@245:       r.AppendLine();
moel@245:       r.AppendLine("       00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
moel@245:       r.AppendLine();
moel@246:       foreach (ushort address in addresses) {
moel@245:           r.Append(" ");
moel@246:           r.Append(address.ToString("X3", CultureInfo.InvariantCulture));
moel@245:           r.Append("  ");
moel@246:           for (ushort j = 0; j <= 0xF; j++) {
moel@245:             r.Append(" ");
moel@246:             r.Append(ReadByte((ushort)(address | j)).ToString(
moel@245:               "X2", CultureInfo.InvariantCulture));
moel@245:           }
moel@245:           r.AppendLine();
moel@245:       }
moel@245:       r.AppendLine();
moel@245: 
moel@245:       Ring0.ReleaseIsaBusMutex();
moel@245: 
moel@245:       return r.ToString();
moel@245:     }
moel@245:   }
moel@245: }