Changed the name of RAM hardware to be always "Generic Memory" because the information from the SMBIOS table is not reliable.

Changed the HDD enumeration code to drop drives without smart support and without any non-zero-sized logical drives.

Added support for the Fintek F71869A (F71868AD) super I/O chip.

Added experimental support for AMD family 15h model 1Xh and family 16h CPUs.

Added support for new Samsung SSDs (like Samsung SSD 840 PRO).

Added the NCT6771F and NCT6776F chips to the lm-sensors interface.

Added code to handle exceptions when creating the report for drives that are no longer available/ready.

Changed the HDD detection to list hard drives without SMART support as well (at least if they have any visible partitions on them).

Added additional exception handling to the http server.

Fixed an issue in the ram group implementation (sensor values did not get stored to the settings instance).

Added Fahrenheit support to the plot.

Changed OxyPlot to draw a line between the different subplots.

Small correction to the plot with multiple axes.

Added an option to disable stacked axes in the plot.

Added experimental support for Intel Haswell CPUs.

Added the new OxyPlot based plot implementation.

Added binaries for the OxyPlot library and updated the License.html file.

Some modifications to the OxyPlot library to simplify the use in the Open Hardware Monitor.

Some modifications to the OxyPlot library to back-port to .NET 2.0. Added the LINQBridge library for the LINQ based code in OxyPlot (the original .NET LINQ is not available in .NET 2.0).

Added the source code of OxyPlot as of commit d190d7748a73 (6.5.2013).

Fixed Issue 415.

Changed the super I/O fan control: Fan controls are now always displayed, even if the value is null (as for example for ITE 87XX chips in automatic mode.

Added additional Fintek chips to the lm-sensors interface.

Fixed Issue 368. Fixed Issue 369. Fixed Issue 370.

Changed the source formatting of the HttpServer class to match the rest of the project.

Fixed Issue 382.

Reduced the amount of dynamic memory allocation when reading from the T-Balancer or creating tray icons.

Enabled fan control on mainboards by default.

Added support for fan control on ITE 87XX chips and a mainboard specific configuration for the Gigabyte GA 970A UD3 (both based on a patch from Eric Hokanson).

Changed a few types to internal (instead of public) in the Open Hardware Monitor library.

Fixed Issue 387. The new implementation does not try to start a ring 0 driver that already exists, but could not be opened. It tries to delete the driver and install it new. The driver is now stored temporarily in the application folder. The driver is not correctly removed on system shutdown.

Added a few checks and delays to the driver loading code to increase the chance of loading the driver.

Changed a few context menu items to display a radio option style. Added additional information from the SMBIOS to the report.

Added a RAM sensor for used memory.

Fixed an error where loading config files from previous versions would crash the application.

Updated the version.

Added temperature offset parameters to all HDD temperature sensors. Fixed issue 271.

Added a new icon for RAM hardware.

Changed the RAM implementation (removed Microsoft.VisualBasic dependency which is not implemented in Mono) and added code to prevent RAM hardware from loading on Linux.

Added a wrapper for the NotifyIconAdv to use the normal NotifyIcon class on Linux systems and the (fixed) custom implementation on Windows systems.

Added a RAM hardware and sensor, fixed Issue 115.

Added used space load sensors for hard drives.

Added a missing default case in the mainboard specific configuration selection. The missing default case prevented sensor data from getting displayed on unknown Asus mainboards with NCT6779D super I/O.

Added more report output to the kernel driver loading code. Hopefully this helps to find the problems in Issue 253.

Changed the system tray icon font scaling to adapt to the size of the tray icon in pixels, because on Windows 7 the tray icon scales with the system font size, while on Windows XP the tray icons are always 16 pixels large.

Improved the data compression for storing the recorded sensor values in the config file.

Attempt at fixing Issue 253 without breaking Issue 159 once more.

Fixed Issue 269.

Fixed Issue 86.

Fixed Issue 274. Fixed Issue 107.

Added the option to enable/disable all hardware groups.

Added a mainboard specific configuration for the Asus P8Z77-V (Issue 347) and added an additional temperature for the Gigabyte GA-MA78LM-S2H (Issue 358).

Added support for SSDs with a controller from Micron.

Added mainboard specific configurations for the following Gigabyte mainboards: EX58-UD3R, G41M-Combo, G41MT-S2, G41MT-S2P, GA-MA770T-UD3P, GA-MA785GM-US2H, GA-MA78LM-S2H, GA-MA790X-UD3P, H55-USB3, H55N-USB3, H61M-DS2 REV 1.2, H61M-USB3-B3 REV 2.0, H67A-USB3-B3, P55A-UD3, P67A-UD3-B3, P67A-UD3R-B3, Z68A-D3H-B3, Z68AP-D3, Z68X-UD3H-B3.

Corrected the temperature reading on NCT6779D super I/O chips. Added a default mainboard specific configuration for NCT6779D super I/O chips.

Added experimental support for Nuvoton NCT6779D super I/O chips.

Fixed Issue 300.

Added support for IT8705F super I/O chips.

Integrated the patch for Fintek F71808E super I/O support developed by Andrey Mushatov.

Added support for reading more than one TBalancer fan controller.

Added support for Intel Ivy Bridge based CPUs. Added code to prevent displaying wrong information on unknown (future) Intel CPUs.

Added a missing menu label.

Added the remote web enhancement developed by Prince Samuel.

Added the source code of the WinRing0 device driver.

Added the small modifications to the Aga.Controls required by the Open Hardware Monitor.

Added the source code of Aga.Controls (TreeViewAdv for .Net) version 1.7.0.0.

Changed the license to the Mozilla Public License 2.0 and update the licensing information.

Fixed a division by zero in the Sandforce write amplification sensor.

Added a simple way to customize the sensor gadget background. If any of the files gadget_background.png, gadget_image.png, gadget_foreground.png, gadget_bar_background.png or gadget_bar_foreground.png is present in the working directory then these files are used instead of the built in files.

Added experimental support for ITE IT8771E super I/O chips.

Added a new sensor type "Factor" for dimensionless values (and similar) that are not to be shown as percent ("Level" type). Changed the write amplification sensor to use the new "Factor" sensor type. Added the temperature SMART attribute for Sandforce SSDs as hidden sensor (as it may show fake results on some hardware).

Added additional smart attribute identification and a write amplification sensor for Sandforce based SSDs.

Small correction to the Sandforce SSD detection to prevent Marvell controllers (M4, C300) from getting identified as Sandforce.

Added a mainboard specific configuration for the ASUS P8Z68-V PRO.

Added a mainboard specific configuration for the ASUS P6T.

Fixed Issue 313.

Fixed Issue 209.

Fixed Issue 213.

Added a mainboard specific configuration for the ASUS P9X79 (detailed fan and control configuration still missing).

Updated year to 2012 in properties and about box.

Further restricted the identification for Indilinx SSDs to prevent Maxtor HDDs to be identified as Indilinx SSD.

Small corrections for AMD family 15h CPUs (based on documentation).

Added SMART support for Samsung SSDs.

Added code to save and restore the plot sensor selection.

Added a context menu to the plot which allows the user to configure the time window for plotting.

Added the hard drive firmware version to the report. This could be important if the SMART attribute layout changes with firmware versions on some drives.

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

Added first experimental support for fan control on the NCT677X super I/O chips.

Fixed issue 268.

Added additional Intel Sandy Bridge CPU power sensors.

Added Added a mainboard specific configuration for the Shuttle SH67Hx barebones. Added the SMBIOS system information to the report.

Added initial support for the ITE IT8772E super I/O chip.

Fixed the power sensor display in the desktop gadget.

Added support for Intel CPU power sensors (package and cores).

Buffered the gadget background drawing in order to improve drawing performance.

Fixed the Intel CPU package temperature sensor MSR.

Replaced the more expensive calls to DateTime.Now with DateTime.UtcNow.

Improved the CPU load sensors. The values displayed for the load per core and the total load should now be more accurate.

Added a mainboard specific configuration for the ASUS P8P67 mainboard.

Added a mainboard specific configuration for the ASUS P8P67 EVO mainboard.

Improved the mainboard specific configuration for the ASUS P8P67 PRO mainboard.

Added fan control for Nvidia GPUs based on a patch by Christian Valli?res.

Added support for reading the TAMG ACPI table on Gigabyte mainboards. Fixed a small problem with HDD/SSD names (0 chars are trimmed now as well).

Small correction for the mainboard specific configuration of the Gigabyte Z68X-UD7-B3 mainboard.

Added support for package level temperature sensors on new Intel Sandy Bridge CPUs.

Added a mainboard specific configuration for the Gigabyte Z68X-UD7-B3 mainboard.

Changed the maximum buffer size for double buffering of controls that isn't disposed after each draw call to the size of the screen. This should reduce the memory allocation and disposing on each sensor update. Also page faults are no longer increasing with this change.

Add a text (Open Hardware Monitor) to the main system tray icon to simplify identification.

Removed the bitmap.GetHbitmap call for every redraw of the gadget. This should reduce dynamic memory allocation and freeing and removes some of the page faults increasing.

Added initial support for AMD family 12h and 15h CPUs.

Fixed issue 241.

Fixed issue 239.

Added support for saving and restoring the sensor history for the last 24h. The sensor history is now saved in a reduced format (duplicate values are removed, gaps are marked with a NAN sensor value.

Fixed a problem preventing the plot form getting closed correctly. This did prevent the application from terminating when asked to exit by the operating system (for example at shutdown).

Added support for the Fintek F71889AD super I/O chip. Extended the identification list of mainboard manufacturers.

Added an option to show the plot in a separate window or on the right of the tree-view.

Fixed Issue 225.

Fixed Issue 224.

Fixed Issue 222.

Fixed Issue 223.