/*

   Version: MPL 1.1/GPL 2.0/LGPL 2.1

   The contents of this file are subject to the Mozilla Public License Version

   1.1 (the "License"); you may not use this file except in compliance with

   the License. You may obtain a copy of the License at

   http://www.mozilla.org/MPL/

   Software distributed under the License is distributed on an "AS IS" basis,

   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

   for the specific language governing rights and limitations under the License.

   The Original Code is the Open Hardware Monitor code.

   The Initial Developer of the Original Code is 

   Michael Möller <m.moeller@gmx.ch>.

   Portions created by the Initial Developer are Copyright (C) 2009-2010

   the Initial Developer. All Rights Reserved.

   Contributor(s):

   Alternatively, the contents of this file may be used under the terms of

   either the GNU General Public License Version 2 or later (the "GPL"), or

   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

   in which case the provisions of the GPL or the LGPL are applicable instead

   of those above. If you wish to allow use of your version of this file only

   under the terms of either the GPL or the LGPL, and not to allow others to

   use your version of this file under the terms of the MPL, indicate your

   decision by deleting the provisions above and replace them with the notice

   and other provisions required by the GPL or the LGPL. If you do not delete

   the provisions above, a recipient may use your version of this file under

   the terms of any one of the MPL, the GPL or the LGPL.

 */

 using System;

 using System.Collections.Generic;

 using System.Drawing;

 using System.Text;

 namespace OpenHardwareMonitor.Hardware.LPC {

   public class W836XX : LPCHardware, IHardware {

     private ushort address;

     private byte revision;

     private bool available;

     private Sensor[] temperatures;

     private Sensor[] fans;

     private Sensor[] voltages;

     private float[] voltageGains;

     private string[] fanNames;

     // Consts 

     private const ushort WINBOND_VENDOR_ID = 0x5CA3;

     private const byte HIGH_BYTE = 0x80;

     // Hardware Monitor

     private const byte ADDRESS_REGISTER_OFFSET = 0x05;

     private const byte DATA_REGISTER_OFFSET = 0x06;

     // Hardware Monitor Registers

     private const byte VOLTAGE_BASE_REG = 0x20;

     private const byte BANK_SELECT_REGISTER = 0x4E;

     private const byte VENDOR_ID_REGISTER = 0x4F;

     private const byte TEMPERATURE_BASE_REG = 0x50;

     private const byte TEMPERATURE_SYS_REG = 0x27;    

     private byte[] FAN_TACHO_REG = new byte[] { 0x28, 0x29, 0x2A, 0x3F, 0x53 };

     private byte[] FAN_TACHO_BANK = new byte[] { 0, 0, 0, 0, 5 };       

     private byte[] FAN_BIT_REG = new byte[] { 0x47, 0x4B, 0x4C, 0x59, 0x5D };

     private byte[] FAN_DIV_BIT0 = new byte[] { 36, 38, 30, 8, 10 };

     private byte[] FAN_DIV_BIT1 = new byte[] { 37, 39, 31, 9, 11 };

     private byte[] FAN_DIV_BIT2 = new byte[] { 5, 6, 7, 23, 15 };

     private byte ReadByte(byte bank, byte register) {

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);

       WinRing0.WriteIoPortByte(

          (ushort)(address + DATA_REGISTER_OFFSET), bank);

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);

       return WinRing0.ReadIoPortByte(

         (ushort)(address + DATA_REGISTER_OFFSET));

     } 

     public W836XX(Chip chip, byte revision, ushort address) 

       : base(chip)

     {

       this.address = address;

       this.revision = revision;

       available = IsWinbondVendor();

       temperatures = new Sensor[3];

       temperatures[0] = new Sensor("CPU", 0, SensorType.Temperature, this);

       temperatures[1] = new Sensor("Auxiliary", 1, SensorType.Temperature, this);

       temperatures[2] = new Sensor("System", 2, SensorType.Temperature, this);

       switch (chip) {

         case Chip.W83627DHG:

         case Chip.W83627DHGP:

         case Chip.W83627EHF:

         case Chip.W83667HG:

         case Chip.W83667HGB: 

           fanNames = new string[] { "System", "CPU", "Auxiliary", 

             "CPU #2", "Auxiliary #2" };

           voltageGains = new float[] { 1, 1, 1, 2, 1, 1, 1, 2 };

           voltages = new Sensor[3];

           voltages[0] = new Sensor("CPU VCore", 0, SensorType.Voltage, this);

           voltages[1] = new Sensor("+3.3V", 3, SensorType.Voltage, this);

           voltages[2] = new Sensor("Battery", 7, SensorType.Voltage, this);

           break;

         case Chip.W83627HF:

         case Chip.W83627THF:

           fanNames = new string[] { "System", "CPU", "Auxiliary" };

           voltageGains = new float[] { 2, 1, 2, 1, 1, 1, 1, 2 };

           voltages = new Sensor[3];

           voltages[0] = new Sensor("CPU VCore", 0, SensorType.Voltage, this);

           voltages[1] = new Sensor("+3.3V", 2, SensorType.Voltage, this);

           voltages[2] = new Sensor("Battery", 7, SensorType.Voltage, this);

           break;

         default: fanNames = new string[0];

           break;

       }

       fans = new Sensor[fanNames.Length];

       for (int i = 0; i < fanNames.Length; i++)

         fans[i] = new Sensor(fanNames[i], i, SensorType.Fan, this);

     }

     public bool IsAvailable {

       get { return available; }

     }        

     private bool IsWinbondVendor() {

       ushort vendorId =

         (ushort)((ReadByte(HIGH_BYTE, VENDOR_ID_REGISTER) << 8) |

            ReadByte(0, VENDOR_ID_REGISTER));

       return vendorId == WINBOND_VENDOR_ID;

     }

     public void Update() {

       foreach (Sensor sensor in voltages) {

         if (sensor.Index < 7) {

           int value = ReadByte(0, (byte)(VOLTAGE_BASE_REG + sensor.Index));

           sensor.Value = 0.008f * voltageGains[sensor.Index] * value;

           if (sensor.Value > 0)

             ActivateSensor(sensor);

           else

             DeactivateSensor(sensor);

         } else {

           // Battery voltage

           bool valid = (ReadByte(0, 0x5D) & 0x01) > 0;

           if (valid) {

             sensor.Value = 

               0.008f * voltageGains[sensor.Index] * ReadByte(5, 0x51);

             ActivateSensor(sensor);

           } else

             DeactivateSensor(sensor);

         }

       }

       foreach (Sensor sensor in temperatures) {

         int value;

         if (sensor.Index < 2) {

           value = (sbyte)ReadByte((byte)(sensor.Index + 1), TEMPERATURE_BASE_REG);

           value = (value << 1) | ReadByte((byte)(sensor.Index + 1),

             (byte)(TEMPERATURE_BASE_REG + 1)) >> 7;

         } else {

           value = (sbyte)ReadByte(0, TEMPERATURE_SYS_REG) << 1;

         }

         sensor.Value = value / 2.0f;

         if (value < 0xFE)

           ActivateSensor(sensor);

         else

           DeactivateSensor(sensor);

       }

       long bits = 0;

       for (int i = 0; i < FAN_BIT_REG.Length; i++)

         bits = (bits << 8) | ReadByte(0, FAN_BIT_REG[i]);

       foreach (Sensor sensor in fans) {

         int count = ReadByte(FAN_TACHO_BANK[sensor.Index], 

           FAN_TACHO_REG[sensor.Index]);

         int divisorBits = (int)(

           (((bits >> FAN_DIV_BIT2[sensor.Index]) & 1) << 2) |

           (((bits >> FAN_DIV_BIT1[sensor.Index]) & 1) << 1) |

            ((bits >> FAN_DIV_BIT0[sensor.Index]) & 1));

         int divisor = 1 << divisorBits;

         float value = (count < 0xff) ? 1.35e6f / (count * divisor) : 0;

         sensor.Value = value;

         if (value > 0)

           ActivateSensor(sensor);        

       }     

     }

     public string GetReport() {

       StringBuilder r = new StringBuilder();

       r.AppendLine("LPC " + this.GetType().Name);

       r.AppendLine();

       r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));

       r.Append("Chip revision: 0x"); r.AppendLine(revision.ToString("X"));

       r.Append("Base Adress: 0x"); r.AppendLine(address.ToString("X4"));

       r.AppendLine();

       r.AppendLine("Hardware Monitor Registers");

       r.AppendLine();

       r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");

       r.AppendLine();

       for (int i = 0; i < 0x7; i++) {

         r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append("  ");

         for (int j = 0; j <= 0xF; j++) {

           r.Append(" ");

           r.Append(ReadByte(0, (byte)((i << 4) | j)).ToString("X2"));

         }

         r.AppendLine();

       }

       for (int k = 1; k <= 15; k++) {

         r.AppendLine("Bank " + k);

         for (int i = 0x5; i < 0x6; i++) {

           r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append("  ");

           for (int j = 0; j <= 0xF; j++) {

             r.Append(" ");

             r.Append(ReadByte((byte)(k),

               (byte)((i << 4) | j)).ToString("X2"));

           }

           r.AppendLine();

         }

       }

       r.AppendLine();

       return r.ToString();

     }

   }

 }