OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@f6db7258890e

     1 /*

     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1

     5   The contents of this file are subject to the Mozilla Public License Version

     6   1.1 (the "License"); you may not use this file except in compliance with

     7   the License. You may obtain a copy of the License at

     9   http://www.mozilla.org/MPL/

    11   Software distributed under the License is distributed on an "AS IS" basis,

    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

    13   for the specific language governing rights and limitations under the License.

    15   The Original Code is the Open Hardware Monitor code.

    17   The Initial Developer of the Original Code is

    18   Michael Möller <m.moeller@gmx.ch>.

    19   Portions created by the Initial Developer are Copyright (C) 2009-2011

    20   the Initial Developer. All Rights Reserved.

    22   Contributor(s):

    24   Alternatively, the contents of this file may be used under the terms of

    25   either the GNU General Public License Version 2 or later (the "GPL"), or

    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

    27   in which case the provisions of the GPL or the LGPL are applicable instead

    28   of those above. If you wish to allow use of your version of this file only

    29   under the terms of either the GPL or the LGPL, and not to allow others to

    30   use your version of this file under the terms of the MPL, indicate your

    31   decision by deleting the provisions above and replace them with the notice

    32   and other provisions required by the GPL or the LGPL. If you do not delete

    33   the provisions above, a recipient may use your version of this file under

    34   the terms of any one of the MPL, the GPL or the LGPL.

    36 */

    38 using System;

    39 using System.Collections.Generic;

    40 using System.Globalization;

    41 using System.Threading;

    42 using OpenHardwareMonitor.Hardware.LPC;

    44 namespace OpenHardwareMonitor.Hardware.Mainboard {

    45   internal class SuperIOHardware : Hardware {

    47     private readonly Mainboard mainboard;

    48     private readonly ISuperIO superIO;

    50     private readonly List<Sensor> voltages = new List<Sensor>();

    51     private readonly List<Sensor> temperatures = new List<Sensor>();

    52     private readonly List<Sensor> fans = new List<Sensor>();

    54     private delegate float? ReadValueDelegate(int index);

    55     private delegate void UpdateDelegate();

    57     // delegates for mainboard specific sensor reading code

    58     private readonly ReadValueDelegate readVoltage;

    59     private readonly ReadValueDelegate readTemperature;

    60     private readonly ReadValueDelegate readFan;

    62     // delegate for post update mainboard specific code

    63     private readonly UpdateDelegate postUpdate;

    65     // mainboard specific mutex

    66     private readonly Mutex mutex;

    68     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,

    69       Manufacturer manufacturer, Model model, ISettings settings)

    70       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",

    71         superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),

    72         settings)

    73     {

    74       this.mainboard = mainboard;

    75       this.superIO = superIO;

    77       this.readVoltage = (index) => superIO.Voltages[index];

    78       this.readTemperature = (index) => superIO.Temperatures[index];

    79       this.readFan = (index) => superIO.Fans[index];

    81       this.postUpdate = () => { };

    83       List<Voltage> v = new List<Voltage>();

    84       List<Temperature> t = new List<Temperature>();

    85       List<Fan> f = new List<Fan>();

    87       switch (superIO.Chip) {

    88         case Chip.IT8712F:

    89         case Chip.IT8716F:

    90         case Chip.IT8718F:

    91         case Chip.IT8720F:

    92         case Chip.IT8726F:

    93           switch (manufacturer) {

    94             case Manufacturer.ASUS:

    95               switch (model) {

    96                 case Model.Crosshair_III_Formula: // IT8720F

    97                   v.Add(new Voltage("VBat", 8));

    98                   t.Add(new Temperature("CPU", 0));

    99                   for (int i = 0; i < superIO.Fans.Length; i++)

   100                     f.Add(new Fan("Fan #" + (i + 1), i));

   101                   break;

   102                 case Model.M2N_SLI_DELUXE:

   103                   v.Add(new Voltage("CPU VCore", 0));

   104                   v.Add(new Voltage("+3.3V", 1));

   105                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   106                   v.Add(new Voltage("+12V", 4, 30, 10));

   107                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   108                   v.Add(new Voltage("VBat", 8));

   109                   t.Add(new Temperature("CPU", 0));

   110                   t.Add(new Temperature("Motherboard", 1));

   111                   f.Add(new Fan("CPU Fan", 0));

   112                   f.Add(new Fan("Chassis Fan #1", 1));

   113                   f.Add(new Fan("Power Fan", 2));

   114                   break;

   115                 case Model.M4A79XTD_EVO: // IT8720F

   116                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   117                   v.Add(new Voltage("VBat", 8));

   118                   t.Add(new Temperature("CPU", 0));

   119                   t.Add(new Temperature("Motherboard", 1));

   120                   f.Add(new Fan("CPU Fan", 0));

   121                   f.Add(new Fan("Chassis Fan #1", 1));

   122                   f.Add(new Fan("Chassis Fan #2", 2));

   123                   break;

   124                 default:

   125                   v.Add(new Voltage("CPU VCore", 0));

   126                   v.Add(new Voltage("Voltage #2", 1, true));

   127                   v.Add(new Voltage("Voltage #3", 2, true));

   128                   v.Add(new Voltage("Voltage #4", 3, true));

   129                   v.Add(new Voltage("Voltage #5", 4, true));

   130                   v.Add(new Voltage("Voltage #6", 5, true));

   131                   v.Add(new Voltage("Voltage #7", 6, true));

   132                   v.Add(new Voltage("Voltage #8", 7, true));

   133                   v.Add(new Voltage("VBat", 8));

   134                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   135                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   136                   for (int i = 0; i < superIO.Fans.Length; i++)

   137                     f.Add(new Fan("Fan #" + (i + 1), i));

   138                   break;

   139               }

   140               break;

   142             case Manufacturer.ASRock:

   143               switch (model) {

   144                 case Model.P55_Deluxe: // IT8720F

   146                   v.Add(new Voltage("CPU VCore", 0));

   147                   v.Add(new Voltage("+3.3V", 2));

   148                   v.Add(new Voltage("+12V", 4, 30, 10));

   149                   v.Add(new Voltage("+5V", 5, 6.8f, 10));

   150                   v.Add(new Voltage("VBat", 8));

   151                   t.Add(new Temperature("CPU", 0));

   152                   t.Add(new Temperature("Motherboard", 1));

   153                   f.Add(new Fan("CPU Fan", 0));

   154                   f.Add(new Fan("Chassis Fan #1", 1));

   156                   // this mutex is also used by the official ASRock tool

   157                   mutex = new Mutex(false, "ASRockOCMark");

   159                   bool exclusiveAccess = false;

   160                   try {

   161                     exclusiveAccess = mutex.WaitOne(10, false);

   162                   } catch (AbandonedMutexException) { }

   163                     catch (InvalidOperationException) { }

   165                   // only read additional fans if we get exclusive access

   166                   if (exclusiveAccess) {

   168                     f.Add(new Fan("Chassis Fan #2", 2));

   169                     f.Add(new Fan("Chassis Fan #3", 3));

   170                     f.Add(new Fan("Power Fan", 4));

   172                     readFan = (index) => {

   173                       if (index < 2) {

   174                         return superIO.Fans[index];

   175                       } else {

   176                         // get GPIO 80-87

   177                         byte? gpio = superIO.ReadGPIO(7);

   178                         if (!gpio.HasValue)

   179                           return null;

   181                         // read the last 3 fans based on GPIO 83-85

   182                         int[] masks = { 0x05, 0x03, 0x06 };

   183                         return (((gpio.Value >> 3) & 0x07) ==

   184                           masks[index - 2]) ? superIO.Fans[2] : null;

   185                       }

   186                     };

   188                     int fanIndex = 0;

   189                     postUpdate = () => {

   190                       // get GPIO 80-87

   191                       byte? gpio = superIO.ReadGPIO(7);

   192                       if (!gpio.HasValue)

   193                         return;

   195                       // prepare the GPIO 83-85 for the next update

   196                       int[] masks = { 0x05, 0x03, 0x06 };

   197                       superIO.WriteGPIO(7,

   198                         (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));

   199                       fanIndex = (fanIndex + 1) % 3;

   200                     };

   201                   }

   203                   break;

   204                 default:

   205                   v.Add(new Voltage("CPU VCore", 0));

   206                   v.Add(new Voltage("Voltage #2", 1, true));

   207                   v.Add(new Voltage("Voltage #3", 2, true));

   208                   v.Add(new Voltage("Voltage #4", 3, true));

   209                   v.Add(new Voltage("Voltage #5", 4, true));

   210                   v.Add(new Voltage("Voltage #6", 5, true));

   211                   v.Add(new Voltage("Voltage #7", 6, true));

   212                   v.Add(new Voltage("Voltage #8", 7, true));

   213                   v.Add(new Voltage("VBat", 8));

   214                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   215                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   216                   for (int i = 0; i < superIO.Fans.Length; i++)

   217                     f.Add(new Fan("Fan #" + (i + 1), i));

   218                   break;

   219               };

   220               break;

   222             case Manufacturer.DFI:

   223               switch (model) {

   224                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   225                   v.Add(new Voltage("CPU VCore", 0));

   226                   v.Add(new Voltage("FSB VTT", 1));

   227                   v.Add(new Voltage("+3.3V", 2));

   228                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   229                   v.Add(new Voltage("+12V", 4, 30, 10));

   230                   v.Add(new Voltage("NB Core", 5));

   231                   v.Add(new Voltage("VDIMM", 6));

   232                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   233                   v.Add(new Voltage("VBat", 8));

   234                   t.Add(new Temperature("CPU", 0));

   235                   t.Add(new Temperature("System", 1));

   236                   t.Add(new Temperature("Chipset", 2));

   237                   f.Add(new Fan("Fan #1", 0));

   238                   f.Add(new Fan("Fan #2", 1));

   239                   f.Add(new Fan("Fan #3", 2));

   240                   break;

   241                 case Model.LP_DK_P55_T3eH9: // IT8720F

   242                   v.Add(new Voltage("CPU VCore", 0));

   243                   v.Add(new Voltage("VTT", 1));

   244                   v.Add(new Voltage("+3.3V", 2));

   245                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   246                   v.Add(new Voltage("+12V", 4, 30, 10));

   247                   v.Add(new Voltage("CPU PLL", 5));

   248                   v.Add(new Voltage("DRAM", 6));

   249                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   250                   v.Add(new Voltage("VBat", 8));

   251                   t.Add(new Temperature("Chipset", 0));

   252                   t.Add(new Temperature("CPU PWM", 1));

   253                   t.Add(new Temperature("CPU", 2));

   254                   f.Add(new Fan("Fan #1", 0));

   255                   f.Add(new Fan("Fan #2", 1));

   256                   f.Add(new Fan("Fan #3", 2));

   257                   break;

   258                 default:

   259                   v.Add(new Voltage("CPU VCore", 0));

   260                   v.Add(new Voltage("VTT", 1, true));

   261                   v.Add(new Voltage("+3.3V", 2, true));

   262                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   263                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   264                   v.Add(new Voltage("Voltage #6", 5, true));

   265                   v.Add(new Voltage("DRAM", 6, true));

   266                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   267                   v.Add(new Voltage("VBat", 8));

   268                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   269                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   270                   for (int i = 0; i < superIO.Fans.Length; i++)

   271                     f.Add(new Fan("Fan #" + (i + 1), i));

   272                   break;

   273               }

   274               break;

   276             case Manufacturer.Gigabyte:

   277               switch (model) {

   278                 case Model._965P_S3: // IT8718F

   279                   v.Add(new Voltage("CPU VCore", 0));

   280                   v.Add(new Voltage("DRAM", 1));

   281                   v.Add(new Voltage("+3.3V", 2));

   282                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   283                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   284                   v.Add(new Voltage("VBat", 8));

   285                   t.Add(new Temperature("System", 0));

   286                   t.Add(new Temperature("CPU", 1));

   287                   f.Add(new Fan("CPU Fan", 0));

   288                   f.Add(new Fan("System Fan", 1));

   289                   break;

   290                 case Model.EP45_DS3R: // IT8718F

   291                 case Model.EP45_UD3R:

   292                 case Model.X38_DS5:

   293                   v.Add(new Voltage("CPU VCore", 0));

   294                   v.Add(new Voltage("DRAM", 1));

   295                   v.Add(new Voltage("+3.3V", 2));

   296                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   297                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   298                   v.Add(new Voltage("VBat", 8));

   299                   t.Add(new Temperature("System", 0));

   300                   t.Add(new Temperature("CPU", 1));

   301                   f.Add(new Fan("CPU Fan", 0));

   302                   f.Add(new Fan("System Fan #2", 1));

   303                   f.Add(new Fan("Power Fan", 2));

   304                   f.Add(new Fan("System Fan #1", 3));

   305                   break;

   306                 case Model.EX58_EXTREME: // IT8720F

   307                   v.Add(new Voltage("CPU VCore", 0));

   308                   v.Add(new Voltage("DRAM", 1));

   309                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   310                   v.Add(new Voltage("VBat", 8));

   311                   t.Add(new Temperature("System", 0));

   312                   t.Add(new Temperature("CPU", 1));

   313                   t.Add(new Temperature("Northbridge", 2));

   314                   f.Add(new Fan("CPU Fan", 0));

   315                   f.Add(new Fan("System Fan #2", 1));

   316                   f.Add(new Fan("Power Fan", 2));

   317                   f.Add(new Fan("System Fan #1", 3));

   318                   break;

   319                 case Model.P35_DS3: // IT8718F

   320                 case Model.P35_DS3L: // IT8718F

   321                   v.Add(new Voltage("CPU VCore", 0));

   322                   v.Add(new Voltage("DRAM", 1));

   323                   v.Add(new Voltage("+3.3V", 2));

   324                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   325                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   326                   v.Add(new Voltage("VBat", 8));

   327                   t.Add(new Temperature("System", 0));

   328                   t.Add(new Temperature("CPU", 1));

   329                   f.Add(new Fan("CPU Fan", 0));

   330                   f.Add(new Fan("System Fan #1", 1));

   331                   f.Add(new Fan("System Fan #2", 2));

   332                   f.Add(new Fan("Power Fan", 3));

   333                   break;

   334                 case Model.P55_UD4: // IT8720F

   335                 case Model.P55M_UD4: // IT8720F

   336                   v.Add(new Voltage("CPU VCore", 0));

   337                   v.Add(new Voltage("DRAM", 1));

   338                   v.Add(new Voltage("+3.3V", 2));

   339                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   340                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   341                   v.Add(new Voltage("VBat", 8));

   342                   t.Add(new Temperature("System", 0));

   343                   t.Add(new Temperature("CPU", 2));

   344                   f.Add(new Fan("CPU Fan", 0));

   345                   f.Add(new Fan("System Fan #2", 1));

   346                   f.Add(new Fan("Power Fan", 2));

   347                   f.Add(new Fan("System Fan #1", 3));

   348                   break;

   349                 case Model.GA_MA770T_UD3: // IT8720F

   350                   v.Add(new Voltage("CPU VCore", 0));

   351                   v.Add(new Voltage("DRAM", 1));

   352                   v.Add(new Voltage("+3.3V", 2));

   353                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   354                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   355                   v.Add(new Voltage("VBat", 8));

   356                   t.Add(new Temperature("System", 0));

   357                   t.Add(new Temperature("CPU", 1));

   358                   f.Add(new Fan("CPU Fan", 0));

   359                   f.Add(new Fan("System Fan #1", 1));

   360                   f.Add(new Fan("System Fan #2", 2));

   361                   f.Add(new Fan("Power Fan", 3));

   362                   break;

   363                 case Model.GA_MA785GMT_UD2H: // IT8718F

   364                   v.Add(new Voltage("CPU VCore", 0));

   365                   v.Add(new Voltage("DRAM", 1));

   366                   v.Add(new Voltage("+3.3V", 2));

   367                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   368                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   369                   v.Add(new Voltage("VBat", 8));

   370                   t.Add(new Temperature("System", 0));

   371                   t.Add(new Temperature("CPU", 1));

   372                   f.Add(new Fan("CPU Fan", 0));

   373                   f.Add(new Fan("System Fan", 1));

   374                   f.Add(new Fan("NB Fan", 2));

   375                   break;

   376                 case Model.X58A_UD3R: // IT8720F

   377                   v.Add(new Voltage("CPU VCore", 0));

   378                   v.Add(new Voltage("DRAM", 1));

   379                   v.Add(new Voltage("+3.3V", 2));

   380                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   381                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   382                   v.Add(new Voltage("VBat", 8));

   383                   t.Add(new Temperature("System", 0));

   384                   t.Add(new Temperature("CPU", 1));

   385                   t.Add(new Temperature("Northbridge", 2));

   386                   f.Add(new Fan("CPU Fan", 0));

   387                   f.Add(new Fan("System Fan #2", 1));

   388                   f.Add(new Fan("Power Fan", 2));

   389                   f.Add(new Fan("System Fan #1", 3));

   390                   break;

   391                 default:

   392                   v.Add(new Voltage("CPU VCore", 0));

   393                   v.Add(new Voltage("DRAM", 1, true));

   394                   v.Add(new Voltage("+3.3V", 2, true));

   395                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   396                   v.Add(new Voltage("Voltage #5", 4, true));

   397                   v.Add(new Voltage("Voltage #6", 5, true));

   398                   v.Add(new Voltage("Voltage #7", 6, true));

   399                   v.Add(new Voltage("Voltage #8", 7, true));

   400                   v.Add(new Voltage("VBat", 8));

   401                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   402                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   403                   for (int i = 0; i < superIO.Fans.Length; i++)

   404                     f.Add(new Fan("Fan #" + (i + 1), i));

   405                   break;

   406               }

   407               break;

   409             default:

   410               v.Add(new Voltage("CPU VCore", 0));

   411               v.Add(new Voltage("Voltage #2", 1, true));

   412               v.Add(new Voltage("Voltage #3", 2, true));

   413               v.Add(new Voltage("Voltage #4", 3, true));

   414               v.Add(new Voltage("Voltage #5", 4, true));

   415               v.Add(new Voltage("Voltage #6", 5, true));

   416               v.Add(new Voltage("Voltage #7", 6, true));

   417               v.Add(new Voltage("Voltage #8", 7, true));

   418               v.Add(new Voltage("VBat", 8));

   419               for (int i = 0; i < superIO.Temperatures.Length; i++)

   420                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   421               for (int i = 0; i < superIO.Fans.Length; i++)

   422                 f.Add(new Fan("Fan #" + (i + 1), i));

   423               break;

   424           }

   425           break;

   427         case Chip.IT8721F:

   428         case Chip.IT8728F:

   429           switch (manufacturer) {

   430             case Manufacturer.ECS:

   431               switch (model) {

   432                 case Model.A890GXM_A: // IT8721F

   433                   v.Add(new Voltage("CPU VCore", 0));

   434                   v.Add(new Voltage("VDIMM", 1));

   435                   v.Add(new Voltage("NB Voltage", 2));

   436                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10));

   437                   // v.Add(new Voltage("VDIMM", 6, true));

   438                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   439                   v.Add(new Voltage("VBat", 8, 10, 10));

   440                   t.Add(new Temperature("CPU", 0));

   441                   t.Add(new Temperature("System", 1));

   442                   t.Add(new Temperature("Northbridge", 2));

   443                   f.Add(new Fan("CPU Fan", 0));

   444                   f.Add(new Fan("System Fan", 1));

   445                   f.Add(new Fan("Power Fan", 2));

   446                   break;

   447                 default:

   448                   v.Add(new Voltage("Voltage #1", 0, true));

   449                   v.Add(new Voltage("Voltage #2", 1, true));

   450                   v.Add(new Voltage("Voltage #3", 2, true));

   451                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   452                   v.Add(new Voltage("Voltage #5", 4, true));

   453                   v.Add(new Voltage("Voltage #6", 5, true));

   454                   v.Add(new Voltage("Voltage #7", 6, true));

   455                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   456                   v.Add(new Voltage("VBat", 8, 10, 10));

   457                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   458                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   459                   for (int i = 0; i < superIO.Fans.Length; i++)

   460                     f.Add(new Fan("Fan #" + (i + 1), i));

   461                   break;

   462               }

   463               break;

   464             case Manufacturer.Gigabyte:

   465               switch (model) {

   466                 case Model.P67A_UD4_B3: // IT8728F

   467                   v.Add(new Voltage("+12V", 0, 100, 10));

   468                   v.Add(new Voltage("+5V", 1, 15, 10));

   469                   v.Add(new Voltage("Voltage #3", 2, true));

   470                   v.Add(new Voltage("Voltage #4", 3, true));

   471                   v.Add(new Voltage("Voltage #5", 4, true));

   472                   v.Add(new Voltage("CPU VCore", 5));

   473                   v.Add(new Voltage("DRAM", 6));

   474                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   475                   v.Add(new Voltage("VBat", 8, 10, 10));

   476                   t.Add(new Temperature("System", 0));

   477                   t.Add(new Temperature("CPU", 2));

   478                   f.Add(new Fan("CPU Fan", 0));

   479                   f.Add(new Fan("System Fan #2", 1));

   480                   f.Add(new Fan("Power Fan", 2));

   481                   f.Add(new Fan("System Fan #1", 3));

   482                   break;

   483                 case Model.H67A_UD3H_B3: // IT8728F

   484                   v.Add(new Voltage("VTT", 0));

   485                   v.Add(new Voltage("+5V", 1, 15, 10));

   486                   v.Add(new Voltage("+12V", 2, 68, 22));

   487                   v.Add(new Voltage("Voltage #4", 3, true));

   488                   v.Add(new Voltage("Voltage #5", 4, true));

   489                   v.Add(new Voltage("CPU VCore", 5));

   490                   v.Add(new Voltage("DRAM", 6));

   491                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   492                   v.Add(new Voltage("VBat", 8, 10, 10));

   493                   t.Add(new Temperature("System", 0));

   494                   t.Add(new Temperature("CPU", 2));

   495                   f.Add(new Fan("CPU Fan", 0));

   496                   f.Add(new Fan("System Fan #1", 1));

   497                   f.Add(new Fan("Power Fan", 2));

   498                   f.Add(new Fan("System Fan #2", 3));

   499                   break;

   500                 default:

   501                   v.Add(new Voltage("Voltage #1", 0, true));

   502                   v.Add(new Voltage("Voltage #2", 1, true));

   503                   v.Add(new Voltage("Voltage #3", 2, true));

   504                   v.Add(new Voltage("Voltage #4", 3, true));

   505                   v.Add(new Voltage("Voltage #5", 4, true));

   506                   v.Add(new Voltage("Voltage #6", 5, true));

   507                   v.Add(new Voltage("Voltage #7", 6, true));

   508                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   509                   v.Add(new Voltage("VBat", 8, 10, 10));

   510                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   511                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   512                   for (int i = 0; i < superIO.Fans.Length; i++)

   513                     f.Add(new Fan("Fan #" + (i + 1), i));

   514                   break;

   515               }

   516               break;

   517             default:

   518               v.Add(new Voltage("Voltage #1", 0, true));

   519               v.Add(new Voltage("Voltage #2", 1, true));

   520               v.Add(new Voltage("Voltage #3", 2, true));

   521               v.Add(new Voltage("Voltage #4", 3, true));

   522               v.Add(new Voltage("Voltage #5", 4, true));

   523               v.Add(new Voltage("Voltage #6", 5, true));

   524               v.Add(new Voltage("Voltage #7", 6, true));

   525               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   526               v.Add(new Voltage("VBat", 8, 10, 10));

   527               for (int i = 0; i < superIO.Temperatures.Length; i++)

   528                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   529               for (int i = 0; i < superIO.Fans.Length; i++)

   530                 f.Add(new Fan("Fan #" + (i + 1), i));

   531               break;

   532           }

   533           break;

   535         case Chip.F71858:

   536           v.Add(new Voltage("VCC3V", 0, 150, 150));

   537           v.Add(new Voltage("VSB3V", 1, 150, 150));

   538           v.Add(new Voltage("Battery", 2, 150, 150));

   539           for (int i = 0; i < superIO.Temperatures.Length; i++)

   540             t.Add(new Temperature("Temperature #" + (i + 1), i));

   541           for (int i = 0; i < superIO.Fans.Length; i++)

   542             f.Add(new Fan("Fan #" + (i + 1), i));

   543           break;

   544         case Chip.F71862:

   545         case Chip.F71869:

   546         case Chip.F71882:

   547         case Chip.F71889AD:

   548         case Chip.F71889ED:

   549         case Chip.F71889F:

   550           switch (manufacturer) {

   551             case Manufacturer.EVGA:

   552               switch (model) {

   553                 case Model.X58_SLI_Classified: // F71882

   554                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   555                   v.Add(new Voltage("CPU VCore", 1, 47, 100));

   556                   v.Add(new Voltage("DIMM", 2, 47, 100));

   557                   v.Add(new Voltage("CPU VTT", 3, 24, 100));

   558                   v.Add(new Voltage("IOH Vcore", 4, 24, 100));

   559                   v.Add(new Voltage("+5V", 5, 51, 12));

   560                   v.Add(new Voltage("+12V", 6, 56, 6.8f));

   561                   v.Add(new Voltage("3VSB", 7, 150, 150));

   562                   v.Add(new Voltage("VBat", 8, 150, 150));

   563                   t.Add(new Temperature("CPU", 0));

   564                   t.Add(new Temperature("VREG", 1));

   565                   t.Add(new Temperature("System", 2));

   566                   f.Add(new Fan("CPU Fan", 0));

   567                   f.Add(new Fan("Power Fan", 1));

   568                   f.Add(new Fan("Chassis Fan", 2));

   569                   break;

   570                 default:

   571                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   572                   v.Add(new Voltage("CPU VCore", 1));

   573                   v.Add(new Voltage("Voltage #3", 2, true));

   574                   v.Add(new Voltage("Voltage #4", 3, true));

   575                   v.Add(new Voltage("Voltage #5", 4, true));

   576                   v.Add(new Voltage("Voltage #6", 5, true));

   577                   v.Add(new Voltage("Voltage #7", 6, true));

   578                   v.Add(new Voltage("VSB3V", 7, 150, 150));

   579                   v.Add(new Voltage("VBat", 8, 150, 150));

   580                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   581                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   582                   for (int i = 0; i < superIO.Fans.Length; i++)

   583                     f.Add(new Fan("Fan #" + (i + 1), i));

   584                   break;

   585               }

   586               break;

   587             default:

   588               v.Add(new Voltage("VCC3V", 0, 150, 150));

   589               v.Add(new Voltage("CPU VCore", 1));

   590               v.Add(new Voltage("Voltage #3", 2, true));

   591               v.Add(new Voltage("Voltage #4", 3, true));

   592               v.Add(new Voltage("Voltage #5", 4, true));

   593               v.Add(new Voltage("Voltage #6", 5, true));

   594               v.Add(new Voltage("Voltage #7", 6, true));

   595               v.Add(new Voltage("VSB3V", 7, 150, 150));

   596               v.Add(new Voltage("VBat", 8, 150, 150));

   597               for (int i = 0; i < superIO.Temperatures.Length; i++)

   598                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   599               for (int i = 0; i < superIO.Fans.Length; i++)

   600                 f.Add(new Fan("Fan #" + (i + 1), i));

   601               break;

   602           }

   603           break;

   605         case Chip.W83627EHF:

   606           switch (manufacturer) {

   607             case Manufacturer.ASRock:

   608               switch (model) {

   609                 case Model.AOD790GX_128M: // W83627EHF

   610                   v.Add(new Voltage("CPU VCore", 0));

   611                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   612                   v.Add(new Voltage("+3.3V", 4, 10, 10));

   613                   v.Add(new Voltage("+5V", 5, 20, 10));

   614                   v.Add(new Voltage("+12V", 6, 28, 5));

   615                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   616                   v.Add(new Voltage("VBAT", 8, 34, 34));

   617                   t.Add(new Temperature("CPU", 0));

   618                   t.Add(new Temperature("Motherboard", 2));

   619                   f.Add(new Fan("CPU Fan", 0));

   620                   f.Add(new Fan("Chassis Fan", 1));

   621                   break;

   622                 default:

   623                   v.Add(new Voltage("CPU VCore", 0));

   624                   v.Add(new Voltage("Voltage #2", 1, true));

   625                   v.Add(new Voltage("AVCC", 2, 34, 34));

   626                   v.Add(new Voltage("3VCC", 3, 34, 34));

   627                   v.Add(new Voltage("Voltage #5", 4, true));

   628                   v.Add(new Voltage("Voltage #6", 5, true));

   629                   v.Add(new Voltage("Voltage #7", 6, true));

   630                   v.Add(new Voltage("3VSB", 7, 34, 34));

   631                   v.Add(new Voltage("VBAT", 8, 34, 34));

   632                   v.Add(new Voltage("Voltage #10", 9, true));

   633                   t.Add(new Temperature("CPU", 0));

   634                   t.Add(new Temperature("Auxiliary", 1));

   635                   t.Add(new Temperature("System", 2));

   636                   f.Add(new Fan("System Fan", 0));

   637                   f.Add(new Fan("CPU Fan", 1));

   638                   f.Add(new Fan("Auxiliary Fan", 2));

   639                   f.Add(new Fan("CPU Fan #2", 3));

   640                   f.Add(new Fan("Auxiliary Fan #2", 4));

   641                   break;

   642               } break;

   643             default:

   644               v.Add(new Voltage("CPU VCore", 0));

   645               v.Add(new Voltage("Voltage #2", 1, true));

   646               v.Add(new Voltage("AVCC", 2, 34, 34));

   647               v.Add(new Voltage("3VCC", 3, 34, 34));

   648               v.Add(new Voltage("Voltage #5", 4, true));

   649               v.Add(new Voltage("Voltage #6", 5, true));

   650               v.Add(new Voltage("Voltage #7", 6, true));

   651               v.Add(new Voltage("3VSB", 7, 34, 34));

   652               v.Add(new Voltage("VBAT", 8, 34, 34));

   653               v.Add(new Voltage("Voltage #10", 9, true));

   654               t.Add(new Temperature("CPU", 0));

   655               t.Add(new Temperature("Auxiliary", 1));

   656               t.Add(new Temperature("System", 2));

   657               f.Add(new Fan("System Fan", 0));

   658               f.Add(new Fan("CPU Fan", 1));

   659               f.Add(new Fan("Auxiliary Fan", 2));

   660               f.Add(new Fan("CPU Fan #2", 3));

   661               f.Add(new Fan("Auxiliary Fan #2", 4));

   662               break;

   663           }

   664           break;

   665         case Chip.W83627DHG:

   666         case Chip.W83627DHGP:

   667         case Chip.W83667HG:

   668         case Chip.W83667HGB:

   669           switch (manufacturer) {

   670             case Manufacturer.ASRock:

   671               switch (model) {

   672                 case Model._880GMH_USB3: // W83627DHG-P

   673                   v.Add(new Voltage("CPU VCore", 0));

   674                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   675                   v.Add(new Voltage("+5V", 5, 15, 7.5f));

   676                   v.Add(new Voltage("+12V", 6, 56, 10));

   677                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   678                   v.Add(new Voltage("VBAT", 8, 34, 34));

   679                   t.Add(new Temperature("CPU", 0));

   680                   t.Add(new Temperature("Motherboard", 2));

   681                   f.Add(new Fan("Chassis Fan", 0));

   682                   f.Add(new Fan("CPU Fan", 1));

   683                   f.Add(new Fan("Power Fan", 2));

   684                   break;

   685                 default:

   686                   v.Add(new Voltage("CPU VCore", 0));

   687                   v.Add(new Voltage("Voltage #2", 1, true));

   688                   v.Add(new Voltage("AVCC", 2, 34, 34));

   689                   v.Add(new Voltage("3VCC", 3, 34, 34));

   690                   v.Add(new Voltage("Voltage #5", 4, true));

   691                   v.Add(new Voltage("Voltage #6", 5, true));

   692                   v.Add(new Voltage("Voltage #7", 6, true));

   693                   v.Add(new Voltage("3VSB", 7, 34, 34));

   694                   v.Add(new Voltage("VBAT", 8, 34, 34));

   695                   t.Add(new Temperature("CPU", 0));

   696                   t.Add(new Temperature("Auxiliary", 1));

   697                   t.Add(new Temperature("System", 2));

   698                   f.Add(new Fan("System Fan", 0));

   699                   f.Add(new Fan("CPU Fan", 1));

   700                   f.Add(new Fan("Auxiliary Fan", 2));

   701                   f.Add(new Fan("CPU Fan #2", 3));

   702                   f.Add(new Fan("Auxiliary Fan #2", 4));

   703                   break;

   704               }

   705               break;

   706             case Manufacturer.ASUS:

   707               switch (model) {

   708                 case Model.P6X58D_E: // W83667HG

   709                 case Model.Rampage_II_GENE: // W83667HG

   710                   v.Add(new Voltage("CPU VCore", 0));

   711                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));

   712                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   713                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   714                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   715                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   716                   v.Add(new Voltage("VBAT", 8, 34, 34));

   717                   t.Add(new Temperature("CPU", 0));

   718                   t.Add(new Temperature("Motherboard", 2));

   719                   f.Add(new Fan("Chassis Fan #1", 0));

   720                   f.Add(new Fan("CPU Fan", 1));

   721                   f.Add(new Fan("Power Fan", 2));

   722                   f.Add(new Fan("Chassis Fan #2", 3));

   723                   f.Add(new Fan("Chassis Fan #3", 4));

   724                   break;

   725                 case Model.Rampage_Extreme: // W83667HG

   726                   v.Add(new Voltage("CPU VCore", 0));

   727                   v.Add(new Voltage("+12V", 1, 12, 2));

   728                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   729                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   730                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   731                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   732                   v.Add(new Voltage("VBAT", 8, 34, 34));

   733                   t.Add(new Temperature("CPU", 0));

   734                   t.Add(new Temperature("Motherboard", 2));

   735                   f.Add(new Fan("Chassis Fan #1", 0));

   736                   f.Add(new Fan("CPU Fan", 1));

   737                   f.Add(new Fan("Power Fan", 2));

   738                   f.Add(new Fan("Chassis Fan #2", 3));

   739                   f.Add(new Fan("Chassis Fan #3", 4));

   740                   break;

   741                 default:

   742                   v.Add(new Voltage("CPU VCore", 0));

   743                   v.Add(new Voltage("Voltage #2", 1, true));

   744                   v.Add(new Voltage("AVCC", 2, 34, 34));

   745                   v.Add(new Voltage("3VCC", 3, 34, 34));

   746                   v.Add(new Voltage("Voltage #5", 4, true));

   747                   v.Add(new Voltage("Voltage #6", 5, true));

   748                   v.Add(new Voltage("Voltage #7", 6, true));

   749                   v.Add(new Voltage("3VSB", 7, 34, 34));

   750                   v.Add(new Voltage("VBAT", 8, 34, 34));

   751                   t.Add(new Temperature("CPU", 0));

   752                   t.Add(new Temperature("Auxiliary", 1));

   753                   t.Add(new Temperature("System", 2));

   754                   f.Add(new Fan("System Fan", 0));

   755                   f.Add(new Fan("CPU Fan", 1));

   756                   f.Add(new Fan("Auxiliary Fan", 2));

   757                   f.Add(new Fan("CPU Fan #2", 3));

   758                   f.Add(new Fan("Auxiliary Fan #2", 4));

   759                   break;

   760               }

   761               break;

   762             default:

   763               v.Add(new Voltage("CPU VCore", 0));

   764               v.Add(new Voltage("Voltage #2", 1, true));

   765               v.Add(new Voltage("AVCC", 2, 34, 34));

   766               v.Add(new Voltage("3VCC", 3, 34, 34));

   767               v.Add(new Voltage("Voltage #5", 4, true));

   768               v.Add(new Voltage("Voltage #6", 5, true));

   769               v.Add(new Voltage("Voltage #7", 6, true));

   770               v.Add(new Voltage("3VSB", 7, 34, 34));

   771               v.Add(new Voltage("VBAT", 8, 34, 34));

   772               t.Add(new Temperature("CPU", 0));

   773               t.Add(new Temperature("Auxiliary", 1));

   774               t.Add(new Temperature("System", 2));

   775               f.Add(new Fan("System Fan", 0));

   776               f.Add(new Fan("CPU Fan", 1));

   777               f.Add(new Fan("Auxiliary Fan", 2));

   778               f.Add(new Fan("CPU Fan #2", 3));

   779               f.Add(new Fan("Auxiliary Fan #2", 4));

   780               break;

   781           }

   782           break;

   783         case Chip.W83627HF:

   784         case Chip.W83627THF:

   785         case Chip.W83687THF:

   786           v.Add(new Voltage("CPU VCore", 0));

   787           v.Add(new Voltage("Voltage #2", 1, true));

   788           v.Add(new Voltage("Voltage #3", 2, true));

   789           v.Add(new Voltage("AVCC", 3, 34, 51));

   790           v.Add(new Voltage("Voltage #5", 4, true));

   791           v.Add(new Voltage("5VSB", 5, 34, 51));

   792           v.Add(new Voltage("VBAT", 6));

   793           t.Add(new Temperature("CPU", 0));

   794           t.Add(new Temperature("Auxiliary", 1));

   795           t.Add(new Temperature("System", 2));

   796           f.Add(new Fan("System Fan", 0));

   797           f.Add(new Fan("CPU Fan", 1));

   798           f.Add(new Fan("Auxiliary Fan", 2));

   799           break;

   800         case Chip.NCT6771F:

   801         case Chip.NCT6776F:

   802           switch (manufacturer) {

   803             case Manufacturer.ASUS:

   804               switch (model) {

   805                 case Model.P8P67_PRO: // NCT6776F

   806                   v.Add(new Voltage("CPU VCore", 0));

   807                   v.Add(new Voltage("Voltage #2", 1, true));

   808                   v.Add(new Voltage("AVCC", 2, 34, 34));

   809                   v.Add(new Voltage("3VCC", 3, 34, 34));

   810                   v.Add(new Voltage("Voltage #5", 4, true));

   811                   v.Add(new Voltage("Voltage #6", 5, true));

   812                   v.Add(new Voltage("Voltage #7", 6, true));

   813                   v.Add(new Voltage("3VSB", 7, 34, 34));

   814                   v.Add(new Voltage("VBAT", 8, 34, 34));

   815                   t.Add(new Temperature("CPU", 1));

   816                   t.Add(new Temperature("Auxiliary", 2));

   817                   t.Add(new Temperature("System", 3));

   818                   f.Add(new Fan("System Fan", 0));

   819                   f.Add(new Fan("CPU Fan", 1));

   820                   f.Add(new Fan("Auxiliary Fan", 2));

   821                   f.Add(new Fan("Auxiliary Fan #2", 3));

   822                   f.Add(new Fan("Auxiliary Fan #3", 4));

   823                   break;

   824                 case Model.P8P67_M_PRO: // NCT6776F

   825                   v.Add(new Voltage("CPU VCore", 0));

   826                   v.Add(new Voltage("+12V", 1, 11, 1));

   827                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   828                   v.Add(new Voltage("+3V", 3, 34, 34));

   829                   v.Add(new Voltage("+5V", 4, 12, 3));

   830                   v.Add(new Voltage("Voltage #6", 5, true));

   831                   v.Add(new Voltage("Voltage #7", 6, true));

   832                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   833                   v.Add(new Voltage("VBAT", 8, 34, 34));

   834                   t.Add(new Temperature("CPU", 0));

   835                   t.Add(new Temperature("Motherboard", 3));

   836                   f.Add(new Fan("Chassis Fan #1", 0));

   837                   f.Add(new Fan("CPU Fan", 1));

   838                   f.Add(new Fan("Chassis Fan #2", 2));

   839                   f.Add(new Fan("Power Fan", 3));

   840                   f.Add(new Fan("Auxiliary Fan", 4));

   841                   break;

   842                 default:

   843                   v.Add(new Voltage("CPU VCore", 0));

   844                   v.Add(new Voltage("Voltage #2", 1, true));

   845                   v.Add(new Voltage("AVCC", 2, 34, 34));

   846                   v.Add(new Voltage("3VCC", 3, 34, 34));

   847                   v.Add(new Voltage("Voltage #5", 4, true));

   848                   v.Add(new Voltage("Voltage #6", 5, true));

   849                   v.Add(new Voltage("Voltage #7", 6, true));

   850                   v.Add(new Voltage("3VSB", 7, 34, 34));

   851                   v.Add(new Voltage("VBAT", 8, 34, 34));

   852                   t.Add(new Temperature("CPU", 0));

   853                   t.Add(new Temperature("CPU", 1));

   854                   t.Add(new Temperature("Auxiliary", 2));

   855                   t.Add(new Temperature("System", 3));

   856                   for (int i = 0; i < superIO.Fans.Length; i++)

   857                     f.Add(new Fan("Fan #" + (i + 1), i));

   858                   break;

   859               }

   860               break;

   861             default:

   862               v.Add(new Voltage("CPU VCore", 0));

   863               v.Add(new Voltage("Voltage #2", 1, true));

   864               v.Add(new Voltage("AVCC", 2, 34, 34));

   865               v.Add(new Voltage("3VCC", 3, 34, 34));

   866               v.Add(new Voltage("Voltage #5", 4, true));

   867               v.Add(new Voltage("Voltage #6", 5, true));

   868               v.Add(new Voltage("Voltage #7", 6, true));

   869               v.Add(new Voltage("3VSB", 7, 34, 34));

   870               v.Add(new Voltage("VBAT", 8, 34, 34));

   871               t.Add(new Temperature("CPU", 0));

   872               t.Add(new Temperature("CPU", 1));

   873               t.Add(new Temperature("Auxiliary", 2));

   874               t.Add(new Temperature("System", 3));

   875               for (int i = 0; i < superIO.Fans.Length; i++)

   876                 f.Add(new Fan("Fan #" + (i + 1), i));

   877               break;

   878           }

   879           break;

   880         default:

   881           for (int i = 0; i < superIO.Voltages.Length; i++)

   882             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   883           for (int i = 0; i < superIO.Temperatures.Length; i++)

   884             t.Add(new Temperature("Temperature #" + (i + 1), i));

   885           for (int i = 0; i < superIO.Fans.Length; i++)

   886             f.Add(new Fan("Fan #" + (i + 1), i));

   887           break;

   888       }

   890       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   891       foreach (Voltage voltage in v)

   892         if (voltage.Index < superIO.Voltages.Length) {

   893           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   894             voltage.Hidden, SensorType.Voltage, this, new [] {

   895             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   896               formula, voltage.Ri),

   897             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   898               formula, voltage.Rf),

   899             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   900               formula, voltage.Vf)

   901             }, settings);

   902           voltages.Add(sensor);

   903       }

   905       foreach (Temperature temperature in t)

   906         if (temperature.Index < superIO.Temperatures.Length) {

   907         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   908           SensorType.Temperature, this, new [] {

   909           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   910         }, settings);

   911         temperatures.Add(sensor);

   912       }

   914       foreach (Fan fan in f)

   915         if (fan.Index < superIO.Fans.Length) {

   916           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   917             this, settings);

   918           fans.Add(sensor);

   919         }

   920     }

   922     public override HardwareType HardwareType {

   923       get { return HardwareType.SuperIO; }

   924     }

   926     public override IHardware Parent {

   927       get { return mainboard; }

   928     }

   931     public override string GetReport() {

   932       return superIO.GetReport();

   933     }

   935     public override void Update() {

   936       superIO.Update();

   938       foreach (Sensor sensor in voltages) {

   939         float? value = readVoltage(sensor.Index);

   940         if (value.HasValue) {

   941           sensor.Value = value + (value - sensor.Parameters[2].Value) *

   942             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

   943           ActivateSensor(sensor);

   944         }

   945       }

   947       foreach (Sensor sensor in temperatures) {

   948         float? value = readTemperature(sensor.Index);

   949         if (value.HasValue) {

   950           sensor.Value = value + sensor.Parameters[0].Value;

   951           ActivateSensor(sensor);

   952         }

   953       }

   955       foreach (Sensor sensor in fans) {

   956         float? value = readFan(sensor.Index);

   957         if (value.HasValue) {

   958           sensor.Value = value;

   959           if (value.Value > 0)

   960             ActivateSensor(sensor);

   961         }

   962       }

   964       postUpdate();

   965     }

   967     private class Voltage {

   968       public readonly string Name;

   969       public readonly int Index;

   970       public readonly float Ri;

   971       public readonly float Rf;

   972       public readonly float Vf;

   973       public readonly bool Hidden;

   975       public Voltage(string name, int index) :

   976         this(name, index, false) { }

   978       public Voltage(string name, int index, bool hidden) :

   979         this(name, index, 0, 1, 0, hidden) { }

   981       public Voltage(string name, int index, float ri, float rf) :

   982         this(name, index, ri, rf, 0, false) { }

   984       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)

   986       public Voltage(string name, int index,

   987         float ri, float rf, float vf, bool hidden)

   988       {

   989         this.Name = name;

   990         this.Index = index;

   991         this.Ri = ri;

   992         this.Rf = rf;

   993         this.Vf = vf;

   994         this.Hidden = hidden;

   995       }

   996     }

   998     private class Temperature {

   999       public readonly string Name;

  1000       public readonly int Index;

  1002       public Temperature(string name, int index) {

  1003         this.Name = name;

  1004         this.Index = index;

  1005       }

  1006     }

  1008     private class Fan {

  1009       public readonly string Name;

  1010       public readonly int Index;

  1012       public Fan(string name, int index) {

  1013         this.Name = name;

  1014         this.Index = index;

  1015       }

  1016     }

  1017   }

  1018 }

author	moel.mich
	Sat, 25 Jun 2011 11:06:54 +0000
changeset 303	f6db7258890e
parent 290	22214a7e85a9
child 305	9652074e6ee5
permissions	-rw-r--r--