OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@d687db11035c

     1 /*

     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1

     5   The contents of this file are subject to the Mozilla Public License Version

     6   1.1 (the "License"); you may not use this file except in compliance with

     7   the License. You may obtain a copy of the License at

     9   http://www.mozilla.org/MPL/

    11   Software distributed under the License is distributed on an "AS IS" basis,

    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

    13   for the specific language governing rights and limitations under the License.

    15   The Original Code is the Open Hardware Monitor code.

    17   The Initial Developer of the Original Code is

    18   Michael Möller <m.moeller@gmx.ch>.

    19   Portions created by the Initial Developer are Copyright (C) 2009-2011

    20   the Initial Developer. All Rights Reserved.

    22   Contributor(s):

    24   Alternatively, the contents of this file may be used under the terms of

    25   either the GNU General Public License Version 2 or later (the "GPL"), or

    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

    27   in which case the provisions of the GPL or the LGPL are applicable instead

    28   of those above. If you wish to allow use of your version of this file only

    29   under the terms of either the GPL or the LGPL, and not to allow others to

    30   use your version of this file under the terms of the MPL, indicate your

    31   decision by deleting the provisions above and replace them with the notice

    32   and other provisions required by the GPL or the LGPL. If you do not delete

    33   the provisions above, a recipient may use your version of this file under

    34   the terms of any one of the MPL, the GPL or the LGPL.

    36 */

    38 using System;

    39 using System.Collections.Generic;

    40 using System.Globalization;

    41 using System.Threading;

    42 using OpenHardwareMonitor.Hardware.LPC;

    44 namespace OpenHardwareMonitor.Hardware.Mainboard {

    45   internal class SuperIOHardware : Hardware {

    47     private readonly Mainboard mainboard;

    48     private readonly ISuperIO superIO;

    50     private readonly List<Sensor> voltages = new List<Sensor>();

    51     private readonly List<Sensor> temperatures = new List<Sensor>();

    52     private readonly List<Sensor> fans = new List<Sensor>();

    54     private delegate float? ReadValueDelegate(int index);

    55     private delegate void UpdateDelegate();

    57     // delegates for mainboard specific sensor reading code

    58     private readonly ReadValueDelegate readVoltage;

    59     private readonly ReadValueDelegate readTemperature;

    60     private readonly ReadValueDelegate readFan;

    62     // delegate for post update mainboard specific code

    63     private readonly UpdateDelegate postUpdate;

    65     // mainboard specific mutex

    66     private readonly Mutex mutex;

    68     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,

    69       Manufacturer manufacturer, Model model, ISettings settings)

    70       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",

    71         superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),

    72         settings)

    73     {

    74       this.mainboard = mainboard;

    75       this.superIO = superIO;

    77       this.readVoltage = (index) => superIO.Voltages[index];

    78       this.readTemperature = (index) => superIO.Temperatures[index];

    79       this.readFan = (index) => superIO.Fans[index];

    81       this.postUpdate = () => { };

    83       List<Voltage> v = new List<Voltage>();

    84       List<Temperature> t = new List<Temperature>();

    85       List<Fan> f = new List<Fan>();

    87       switch (superIO.Chip) {

    88         case Chip.IT8712F:

    89         case Chip.IT8716F:

    90         case Chip.IT8718F:

    91         case Chip.IT8720F:

    92         case Chip.IT8726F:

    93           switch (manufacturer) {

    94             case Manufacturer.ASUS:

    95               switch (model) {

    96                 case Model.Crosshair_III_Formula: // IT8720F

    97                   v.Add(new Voltage("VBat", 8));

    98                   t.Add(new Temperature("CPU", 0));

    99                   for (int i = 0; i < superIO.Fans.Length; i++)

   100                     f.Add(new Fan("Fan #" + (i + 1), i));

   101                   break;

   102                 case Model.M2N_SLI_DELUXE:

   103                   v.Add(new Voltage("CPU VCore", 0));

   104                   v.Add(new Voltage("+3.3V", 1));

   105                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   106                   v.Add(new Voltage("+12V", 4, 30, 10));

   107                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   108                   v.Add(new Voltage("VBat", 8));

   109                   t.Add(new Temperature("CPU", 0));

   110                   t.Add(new Temperature("Motherboard", 1));

   111                   f.Add(new Fan("CPU Fan", 0));

   112                   f.Add(new Fan("Chassis Fan #1", 1));

   113                   f.Add(new Fan("Power Fan", 2));

   114                   break;

   115                 case Model.M4A79XTD_EVO: // IT8720F

   116                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   117                   v.Add(new Voltage("VBat", 8));

   118                   t.Add(new Temperature("CPU", 0));

   119                   t.Add(new Temperature("Motherboard", 1));

   120                   f.Add(new Fan("CPU Fan", 0));

   121                   f.Add(new Fan("Chassis Fan #1", 1));

   122                   f.Add(new Fan("Chassis Fan #2", 2));

   123                   break;

   124                 default:

   125                   v.Add(new Voltage("CPU VCore", 0));

   126                   v.Add(new Voltage("Voltage #2", 1, true));

   127                   v.Add(new Voltage("Voltage #3", 2, true));

   128                   v.Add(new Voltage("Voltage #4", 3, true));

   129                   v.Add(new Voltage("Voltage #5", 4, true));

   130                   v.Add(new Voltage("Voltage #6", 5, true));

   131                   v.Add(new Voltage("Voltage #7", 6, true));

   132                   v.Add(new Voltage("Voltage #8", 7, true));

   133                   v.Add(new Voltage("VBat", 8));

   134                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   135                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   136                   for (int i = 0; i < superIO.Fans.Length; i++)

   137                     f.Add(new Fan("Fan #" + (i + 1), i));

   138                   break;

   139               }

   140               break;

   142             case Manufacturer.ASRock:

   143               switch (model) {

   144                 case Model.P55_Deluxe: // IT8720F

   146                   v.Add(new Voltage("CPU VCore", 0));

   147                   v.Add(new Voltage("+3.3V", 2));

   148                   v.Add(new Voltage("+12V", 4, 30, 10));

   149                   v.Add(new Voltage("+5V", 5, 6.8f, 10));

   150                   v.Add(new Voltage("VBat", 8));

   151                   t.Add(new Temperature("CPU", 0));

   152                   t.Add(new Temperature("Motherboard", 1));

   153                   f.Add(new Fan("CPU Fan", 0));

   154                   f.Add(new Fan("Chassis Fan #1", 1));

   156                   // this mutex is also used by the official ASRock tool

   157                   mutex = new Mutex(false, "ASRockOCMark");

   159                   bool exclusiveAccess = false;

   160                   try {

   161                     exclusiveAccess = mutex.WaitOne(10, false);

   162                   } catch (AbandonedMutexException) { }

   163                     catch (InvalidOperationException) { }

   165                   // only read additional fans if we get exclusive access

   166                   if (exclusiveAccess) {

   168                     f.Add(new Fan("Chassis Fan #2", 2));

   169                     f.Add(new Fan("Chassis Fan #3", 3));

   170                     f.Add(new Fan("Power Fan", 4));

   172                     readFan = (index) => {

   173                       if (index < 2) {

   174                         return superIO.Fans[index];

   175                       } else {

   176                         // get GPIO 80-87

   177                         byte? gpio = superIO.ReadGPIO(7);

   178                         if (!gpio.HasValue)

   179                           return null;

   181                         // read the last 3 fans based on GPIO 83-85

   182                         int[] masks = { 0x05, 0x03, 0x06 };

   183                         return (((gpio.Value >> 3) & 0x07) ==

   184                           masks[index - 2]) ? superIO.Fans[2] : null;

   185                       }

   186                     };

   188                     int fanIndex = 0;

   189                     postUpdate = () => {

   190                       // get GPIO 80-87

   191                       byte? gpio = superIO.ReadGPIO(7);

   192                       if (!gpio.HasValue)

   193                         return;

   195                       // prepare the GPIO 83-85 for the next update

   196                       int[] masks = { 0x05, 0x03, 0x06 };

   197                       superIO.WriteGPIO(7,

   198                         (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));

   199                       fanIndex = (fanIndex + 1) % 3;

   200                     };

   201                   }

   203                   break;

   204                 default:

   205                   v.Add(new Voltage("CPU VCore", 0));

   206                   v.Add(new Voltage("Voltage #2", 1, true));

   207                   v.Add(new Voltage("Voltage #3", 2, true));

   208                   v.Add(new Voltage("Voltage #4", 3, true));

   209                   v.Add(new Voltage("Voltage #5", 4, true));

   210                   v.Add(new Voltage("Voltage #6", 5, true));

   211                   v.Add(new Voltage("Voltage #7", 6, true));

   212                   v.Add(new Voltage("Voltage #8", 7, true));

   213                   v.Add(new Voltage("VBat", 8));

   214                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   215                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   216                   for (int i = 0; i < superIO.Fans.Length; i++)

   217                     f.Add(new Fan("Fan #" + (i + 1), i));

   218                   break;

   219               };

   220               break;

   222             case Manufacturer.DFI:

   223               switch (model) {

   224                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   225                   v.Add(new Voltage("CPU VCore", 0));

   226                   v.Add(new Voltage("FSB VTT", 1));

   227                   v.Add(new Voltage("+3.3V", 2));

   228                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   229                   v.Add(new Voltage("+12V", 4, 30, 10));

   230                   v.Add(new Voltage("NB Core", 5));

   231                   v.Add(new Voltage("VDIMM", 6));

   232                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   233                   v.Add(new Voltage("VBat", 8));

   234                   t.Add(new Temperature("CPU", 0));

   235                   t.Add(new Temperature("System", 1));

   236                   t.Add(new Temperature("Chipset", 2));

   237                   f.Add(new Fan("Fan #1", 0));

   238                   f.Add(new Fan("Fan #2", 1));

   239                   f.Add(new Fan("Fan #3", 2));

   240                   break;

   241                 case Model.LP_DK_P55_T3eH9: // IT8720F

   242                   v.Add(new Voltage("CPU VCore", 0));

   243                   v.Add(new Voltage("VTT", 1));

   244                   v.Add(new Voltage("+3.3V", 2));

   245                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   246                   v.Add(new Voltage("+12V", 4, 30, 10));

   247                   v.Add(new Voltage("CPU PLL", 5));

   248                   v.Add(new Voltage("DRAM", 6));

   249                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   250                   v.Add(new Voltage("VBat", 8));

   251                   t.Add(new Temperature("Chipset", 0));

   252                   t.Add(new Temperature("CPU PWM", 1));

   253                   t.Add(new Temperature("CPU", 2));

   254                   f.Add(new Fan("Fan #1", 0));

   255                   f.Add(new Fan("Fan #2", 1));

   256                   f.Add(new Fan("Fan #3", 2));

   257                   break;

   258                 default:

   259                   v.Add(new Voltage("CPU VCore", 0));

   260                   v.Add(new Voltage("VTT", 1, true));

   261                   v.Add(new Voltage("+3.3V", 2, true));

   262                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   263                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   264                   v.Add(new Voltage("Voltage #6", 5, true));

   265                   v.Add(new Voltage("DRAM", 6, true));

   266                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   267                   v.Add(new Voltage("VBat", 8));

   268                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   269                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   270                   for (int i = 0; i < superIO.Fans.Length; i++)

   271                     f.Add(new Fan("Fan #" + (i + 1), i));

   272                   break;

   273               }

   274               break;

   276             case Manufacturer.Gigabyte:

   277               switch (model) {

   278                 case Model._965P_S3: // IT8718F

   279                   v.Add(new Voltage("CPU VCore", 0));

   280                   v.Add(new Voltage("DRAM", 1));

   281                   v.Add(new Voltage("+3.3V", 2));

   282                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   283                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   284                   v.Add(new Voltage("VBat", 8));

   285                   t.Add(new Temperature("System", 0));

   286                   t.Add(new Temperature("CPU", 1));

   287                   f.Add(new Fan("CPU Fan", 0));

   288                   f.Add(new Fan("System Fan", 1));

   289                   break;

   290                 case Model.EP45_DS3R: // IT8718F

   291                 case Model.EP45_UD3R:

   292                 case Model.X38_DS5:

   293                   v.Add(new Voltage("CPU VCore", 0));

   294                   v.Add(new Voltage("DRAM", 1));

   295                   v.Add(new Voltage("+3.3V", 2));

   296                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   297                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   298                   v.Add(new Voltage("VBat", 8));

   299                   t.Add(new Temperature("System", 0));

   300                   t.Add(new Temperature("CPU", 1));

   301                   f.Add(new Fan("CPU Fan", 0));

   302                   f.Add(new Fan("System Fan #2", 1));

   303                   f.Add(new Fan("Power Fan", 2));

   304                   f.Add(new Fan("System Fan #1", 3));

   305                   break;

   306                 case Model.EX58_EXTREME: // IT8720F

   307                   v.Add(new Voltage("CPU VCore", 0));

   308                   v.Add(new Voltage("DRAM", 1));

   309                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   310                   v.Add(new Voltage("VBat", 8));

   311                   t.Add(new Temperature("System", 0));

   312                   t.Add(new Temperature("CPU", 1));

   313                   t.Add(new Temperature("Northbridge", 2));

   314                   f.Add(new Fan("CPU Fan", 0));

   315                   f.Add(new Fan("System Fan #2", 1));

   316                   f.Add(new Fan("Power Fan", 2));

   317                   f.Add(new Fan("System Fan #1", 3));

   318                   break;

   319                 case Model.P35_DS3: // IT8718F

   320                 case Model.P35_DS3L: // IT8718F

   321                   v.Add(new Voltage("CPU VCore", 0));

   322                   v.Add(new Voltage("DRAM", 1));

   323                   v.Add(new Voltage("+3.3V", 2));

   324                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   325                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   326                   v.Add(new Voltage("VBat", 8));

   327                   t.Add(new Temperature("System", 0));

   328                   t.Add(new Temperature("CPU", 1));

   329                   f.Add(new Fan("CPU Fan", 0));

   330                   f.Add(new Fan("System Fan #1", 1));

   331                   f.Add(new Fan("System Fan #2", 2));

   332                   f.Add(new Fan("Power Fan", 3));

   333                   break;

   334                 case Model.P55_UD4: // IT8720F

   335                 case Model.P55M_UD4: // IT8720F

   336                   v.Add(new Voltage("CPU VCore", 0));

   337                   v.Add(new Voltage("DRAM", 1));

   338                   v.Add(new Voltage("+3.3V", 2));

   339                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   340                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   341                   v.Add(new Voltage("VBat", 8));

   342                   t.Add(new Temperature("System", 0));

   343                   t.Add(new Temperature("CPU", 2));

   344                   f.Add(new Fan("CPU Fan", 0));

   345                   f.Add(new Fan("System Fan #2", 1));

   346                   f.Add(new Fan("Power Fan", 2));

   347                   f.Add(new Fan("System Fan #1", 3));

   348                   break;

   349                 case Model.GA_MA770T_UD3: // IT8720F

   350                   v.Add(new Voltage("CPU VCore", 0));

   351                   v.Add(new Voltage("DRAM", 1));

   352                   v.Add(new Voltage("+3.3V", 2));

   353                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   354                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   355                   v.Add(new Voltage("VBat", 8));

   356                   t.Add(new Temperature("System", 0));

   357                   t.Add(new Temperature("CPU", 1));

   358                   f.Add(new Fan("CPU Fan", 0));

   359                   f.Add(new Fan("System Fan #1", 1));

   360                   f.Add(new Fan("System Fan #2", 2));

   361                   f.Add(new Fan("Power Fan", 3));

   362                   break;

   363                 case Model.GA_MA785GMT_UD2H: // IT8718F

   364                   v.Add(new Voltage("CPU VCore", 0));

   365                   v.Add(new Voltage("DRAM", 1));

   366                   v.Add(new Voltage("+3.3V", 2));

   367                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   368                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   369                   v.Add(new Voltage("VBat", 8));

   370                   t.Add(new Temperature("System", 0));

   371                   t.Add(new Temperature("CPU", 1));

   372                   f.Add(new Fan("CPU Fan", 0));

   373                   f.Add(new Fan("System Fan", 1));

   374                   f.Add(new Fan("NB Fan", 2));

   375                   break;

   376                 case Model.X58A_UD3R: // IT8720F

   377                   v.Add(new Voltage("CPU VCore", 0));

   378                   v.Add(new Voltage("DRAM", 1));

   379                   v.Add(new Voltage("+3.3V", 2));

   380                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   381                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   382                   v.Add(new Voltage("VBat", 8));

   383                   t.Add(new Temperature("System", 0));

   384                   t.Add(new Temperature("CPU", 1));

   385                   t.Add(new Temperature("Northbridge", 2));

   386                   f.Add(new Fan("CPU Fan", 0));

   387                   f.Add(new Fan("System Fan #2", 1));

   388                   f.Add(new Fan("Power Fan", 2));

   389                   f.Add(new Fan("System Fan #1", 3));

   390                   break;

   391                 default:

   392                   v.Add(new Voltage("CPU VCore", 0));

   393                   v.Add(new Voltage("DRAM", 1, true));

   394                   v.Add(new Voltage("+3.3V", 2, true));

   395                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   396                   v.Add(new Voltage("Voltage #5", 4, true));

   397                   v.Add(new Voltage("Voltage #6", 5, true));

   398                   v.Add(new Voltage("Voltage #7", 6, true));

   399                   v.Add(new Voltage("Voltage #8", 7, true));

   400                   v.Add(new Voltage("VBat", 8));

   401                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   402                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   403                   for (int i = 0; i < superIO.Fans.Length; i++)

   404                     f.Add(new Fan("Fan #" + (i + 1), i));

   405                   break;

   406               }

   407               break;

   409             default:

   410               v.Add(new Voltage("CPU VCore", 0));

   411               v.Add(new Voltage("Voltage #2", 1, true));

   412               v.Add(new Voltage("Voltage #3", 2, true));

   413               v.Add(new Voltage("Voltage #4", 3, true));

   414               v.Add(new Voltage("Voltage #5", 4, true));

   415               v.Add(new Voltage("Voltage #6", 5, true));

   416               v.Add(new Voltage("Voltage #7", 6, true));

   417               v.Add(new Voltage("Voltage #8", 7, true));

   418               v.Add(new Voltage("VBat", 8));

   419               for (int i = 0; i < superIO.Temperatures.Length; i++)

   420                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   421               for (int i = 0; i < superIO.Fans.Length; i++)

   422                 f.Add(new Fan("Fan #" + (i + 1), i));

   423               break;

   424           }

   425           break;

   427         case Chip.IT8721F:

   428         case Chip.IT8728F:

   429           switch (manufacturer) {

   430             case Manufacturer.ECS:

   431               switch (model) {

   432                 case Model.A890GXM_A: // IT8721F

   433                   v.Add(new Voltage("CPU VCore", 0));

   434                   v.Add(new Voltage("VDIMM", 1));

   435                   v.Add(new Voltage("NB Voltage", 2));

   436                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10));

   437                   // v.Add(new Voltage("VDIMM", 6, true));

   438                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   439                   v.Add(new Voltage("VBat", 8, 10, 10));

   440                   t.Add(new Temperature("CPU", 0));

   441                   t.Add(new Temperature("System", 1));

   442                   t.Add(new Temperature("Northbridge", 2));

   443                   f.Add(new Fan("CPU Fan", 0));

   444                   f.Add(new Fan("System Fan", 1));

   445                   f.Add(new Fan("Power Fan", 2));

   446                   break;

   447                 default:

   448                   v.Add(new Voltage("Voltage #1", 0, true));

   449                   v.Add(new Voltage("Voltage #2", 1, true));

   450                   v.Add(new Voltage("Voltage #3", 2, true));

   451                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   452                   v.Add(new Voltage("Voltage #5", 4, true));

   453                   v.Add(new Voltage("Voltage #6", 5, true));

   454                   v.Add(new Voltage("Voltage #7", 6, true));

   455                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   456                   v.Add(new Voltage("VBat", 8, 10, 10));

   457                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   458                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   459                   for (int i = 0; i < superIO.Fans.Length; i++)

   460                     f.Add(new Fan("Fan #" + (i + 1), i));

   461                   break;

   462               }

   463               break;

   464             case Manufacturer.Gigabyte:

   465               switch (model) {

   466                 case Model.P67A_UD4_B3: // IT8728F

   467                   v.Add(new Voltage("+12V", 0, 100, 10));

   468                   v.Add(new Voltage("+5V", 1, 15, 10));

   469                   v.Add(new Voltage("Voltage #3", 2, true));

   470                   v.Add(new Voltage("Voltage #4", 3, true));

   471                   v.Add(new Voltage("Voltage #5", 4, true));

   472                   v.Add(new Voltage("CPU VCore", 5));

   473                   v.Add(new Voltage("DRAM", 6));

   474                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   475                   v.Add(new Voltage("VBat", 8, 10, 10));

   476                   t.Add(new Temperature("System", 0));

   477                   t.Add(new Temperature("CPU", 2));

   478                   f.Add(new Fan("CPU Fan", 0));

   479                   f.Add(new Fan("System Fan #2", 1));

   480                   f.Add(new Fan("Power Fan", 2));

   481                   f.Add(new Fan("System Fan #1", 3));

   482                   break;

   483                 case Model.H67A_UD3H_B3: // IT8728F

   484                   v.Add(new Voltage("VTT", 0));

   485                   v.Add(new Voltage("+5V", 1, 15, 10));

   486                   v.Add(new Voltage("+12V", 2, 68, 22));

   487                   v.Add(new Voltage("Voltage #4", 3, true));

   488                   v.Add(new Voltage("Voltage #5", 4, true));

   489                   v.Add(new Voltage("CPU VCore", 5));

   490                   v.Add(new Voltage("DRAM", 6));

   491                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   492                   v.Add(new Voltage("VBat", 8, 10, 10));

   493                   t.Add(new Temperature("System", 0));

   494                   t.Add(new Temperature("CPU", 2));

   495                   f.Add(new Fan("CPU Fan", 0));

   496                   f.Add(new Fan("System Fan #1", 1));

   497                   f.Add(new Fan("Power Fan", 2));

   498                   f.Add(new Fan("System Fan #2", 3));

   499                   break;

   500                 case Model.Z68X_UD7_B3: // IT8728F

   501                   v.Add(new Voltage("VTT", 0));

   502                   v.Add(new Voltage("+3.3V", 1, 13.3f, 20.5f));

   503                   v.Add(new Voltage("+12V", 2, 68, 22));

   504                   v.Add(new Voltage("+5V", 3, 14.3f, 20));

   505                   v.Add(new Voltage("CPU VCore", 5));

   506                   v.Add(new Voltage("DRAM", 6));

   507                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   508                   v.Add(new Voltage("VBat", 8, 10, 10));

   509                   t.Add(new Temperature("System", 0));

   510                   t.Add(new Temperature("CPU", 1));

   511                   t.Add(new Temperature("System 3", 2));

   512                   f.Add(new Fan("CPU Fan", 0));

   513                   f.Add(new Fan("Power Fan", 1));

   514                   f.Add(new Fan("System Fan #1", 2));

   515                   f.Add(new Fan("System Fan #2", 3));

   516                   f.Add(new Fan("System Fan #3", 4));

   517                   break;

   518                 default:

   519                   v.Add(new Voltage("Voltage #1", 0, true));

   520                   v.Add(new Voltage("Voltage #2", 1, true));

   521                   v.Add(new Voltage("Voltage #3", 2, true));

   522                   v.Add(new Voltage("Voltage #4", 3, true));

   523                   v.Add(new Voltage("Voltage #5", 4, true));

   524                   v.Add(new Voltage("Voltage #6", 5, true));

   525                   v.Add(new Voltage("Voltage #7", 6, true));

   526                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   527                   v.Add(new Voltage("VBat", 8, 10, 10));

   528                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   529                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   530                   for (int i = 0; i < superIO.Fans.Length; i++)

   531                     f.Add(new Fan("Fan #" + (i + 1), i));

   532                   break;

   533               }

   534               break;

   535             default:

   536               v.Add(new Voltage("Voltage #1", 0, true));

   537               v.Add(new Voltage("Voltage #2", 1, true));

   538               v.Add(new Voltage("Voltage #3", 2, true));

   539               v.Add(new Voltage("Voltage #4", 3, true));

   540               v.Add(new Voltage("Voltage #5", 4, true));

   541               v.Add(new Voltage("Voltage #6", 5, true));

   542               v.Add(new Voltage("Voltage #7", 6, true));

   543               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   544               v.Add(new Voltage("VBat", 8, 10, 10));

   545               for (int i = 0; i < superIO.Temperatures.Length; i++)

   546                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   547               for (int i = 0; i < superIO.Fans.Length; i++)

   548                 f.Add(new Fan("Fan #" + (i + 1), i));

   549               break;

   550           }

   551           break;

   553         case Chip.F71858:

   554           v.Add(new Voltage("VCC3V", 0, 150, 150));

   555           v.Add(new Voltage("VSB3V", 1, 150, 150));

   556           v.Add(new Voltage("Battery", 2, 150, 150));

   557           for (int i = 0; i < superIO.Temperatures.Length; i++)

   558             t.Add(new Temperature("Temperature #" + (i + 1), i));

   559           for (int i = 0; i < superIO.Fans.Length; i++)

   560             f.Add(new Fan("Fan #" + (i + 1), i));

   561           break;

   562         case Chip.F71862:

   563         case Chip.F71869:

   564         case Chip.F71882:

   565         case Chip.F71889AD:

   566         case Chip.F71889ED:

   567         case Chip.F71889F:

   568           switch (manufacturer) {

   569             case Manufacturer.EVGA:

   570               switch (model) {

   571                 case Model.X58_SLI_Classified: // F71882

   572                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   573                   v.Add(new Voltage("CPU VCore", 1, 47, 100));

   574                   v.Add(new Voltage("DIMM", 2, 47, 100));

   575                   v.Add(new Voltage("CPU VTT", 3, 24, 100));

   576                   v.Add(new Voltage("IOH Vcore", 4, 24, 100));

   577                   v.Add(new Voltage("+5V", 5, 51, 12));

   578                   v.Add(new Voltage("+12V", 6, 56, 6.8f));

   579                   v.Add(new Voltage("3VSB", 7, 150, 150));

   580                   v.Add(new Voltage("VBat", 8, 150, 150));

   581                   t.Add(new Temperature("CPU", 0));

   582                   t.Add(new Temperature("VREG", 1));

   583                   t.Add(new Temperature("System", 2));

   584                   f.Add(new Fan("CPU Fan", 0));

   585                   f.Add(new Fan("Power Fan", 1));

   586                   f.Add(new Fan("Chassis Fan", 2));

   587                   break;

   588                 default:

   589                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   590                   v.Add(new Voltage("CPU VCore", 1));

   591                   v.Add(new Voltage("Voltage #3", 2, true));

   592                   v.Add(new Voltage("Voltage #4", 3, true));

   593                   v.Add(new Voltage("Voltage #5", 4, true));

   594                   v.Add(new Voltage("Voltage #6", 5, true));

   595                   v.Add(new Voltage("Voltage #7", 6, true));

   596                   v.Add(new Voltage("VSB3V", 7, 150, 150));

   597                   v.Add(new Voltage("VBat", 8, 150, 150));

   598                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   599                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   600                   for (int i = 0; i < superIO.Fans.Length; i++)

   601                     f.Add(new Fan("Fan #" + (i + 1), i));

   602                   break;

   603               }

   604               break;

   605             default:

   606               v.Add(new Voltage("VCC3V", 0, 150, 150));

   607               v.Add(new Voltage("CPU VCore", 1));

   608               v.Add(new Voltage("Voltage #3", 2, true));

   609               v.Add(new Voltage("Voltage #4", 3, true));

   610               v.Add(new Voltage("Voltage #5", 4, true));

   611               v.Add(new Voltage("Voltage #6", 5, true));

   612               v.Add(new Voltage("Voltage #7", 6, true));

   613               v.Add(new Voltage("VSB3V", 7, 150, 150));

   614               v.Add(new Voltage("VBat", 8, 150, 150));

   615               for (int i = 0; i < superIO.Temperatures.Length; i++)

   616                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   617               for (int i = 0; i < superIO.Fans.Length; i++)

   618                 f.Add(new Fan("Fan #" + (i + 1), i));

   619               break;

   620           }

   621           break;

   623         case Chip.W83627EHF:

   624           switch (manufacturer) {

   625             case Manufacturer.ASRock:

   626               switch (model) {

   627                 case Model.AOD790GX_128M: // W83627EHF

   628                   v.Add(new Voltage("CPU VCore", 0));

   629                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   630                   v.Add(new Voltage("+3.3V", 4, 10, 10));

   631                   v.Add(new Voltage("+5V", 5, 20, 10));

   632                   v.Add(new Voltage("+12V", 6, 28, 5));

   633                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   634                   v.Add(new Voltage("VBAT", 8, 34, 34));

   635                   t.Add(new Temperature("CPU", 0));

   636                   t.Add(new Temperature("Motherboard", 2));

   637                   f.Add(new Fan("CPU Fan", 0));

   638                   f.Add(new Fan("Chassis Fan", 1));

   639                   break;

   640                 default:

   641                   v.Add(new Voltage("CPU VCore", 0));

   642                   v.Add(new Voltage("Voltage #2", 1, true));

   643                   v.Add(new Voltage("AVCC", 2, 34, 34));

   644                   v.Add(new Voltage("3VCC", 3, 34, 34));

   645                   v.Add(new Voltage("Voltage #5", 4, true));

   646                   v.Add(new Voltage("Voltage #6", 5, true));

   647                   v.Add(new Voltage("Voltage #7", 6, true));

   648                   v.Add(new Voltage("3VSB", 7, 34, 34));

   649                   v.Add(new Voltage("VBAT", 8, 34, 34));

   650                   v.Add(new Voltage("Voltage #10", 9, true));

   651                   t.Add(new Temperature("CPU", 0));

   652                   t.Add(new Temperature("Auxiliary", 1));

   653                   t.Add(new Temperature("System", 2));

   654                   f.Add(new Fan("System Fan", 0));

   655                   f.Add(new Fan("CPU Fan", 1));

   656                   f.Add(new Fan("Auxiliary Fan", 2));

   657                   f.Add(new Fan("CPU Fan #2", 3));

   658                   f.Add(new Fan("Auxiliary Fan #2", 4));

   659                   break;

   660               } break;

   661             default:

   662               v.Add(new Voltage("CPU VCore", 0));

   663               v.Add(new Voltage("Voltage #2", 1, true));

   664               v.Add(new Voltage("AVCC", 2, 34, 34));

   665               v.Add(new Voltage("3VCC", 3, 34, 34));

   666               v.Add(new Voltage("Voltage #5", 4, true));

   667               v.Add(new Voltage("Voltage #6", 5, true));

   668               v.Add(new Voltage("Voltage #7", 6, true));

   669               v.Add(new Voltage("3VSB", 7, 34, 34));

   670               v.Add(new Voltage("VBAT", 8, 34, 34));

   671               v.Add(new Voltage("Voltage #10", 9, true));

   672               t.Add(new Temperature("CPU", 0));

   673               t.Add(new Temperature("Auxiliary", 1));

   674               t.Add(new Temperature("System", 2));

   675               f.Add(new Fan("System Fan", 0));

   676               f.Add(new Fan("CPU Fan", 1));

   677               f.Add(new Fan("Auxiliary Fan", 2));

   678               f.Add(new Fan("CPU Fan #2", 3));

   679               f.Add(new Fan("Auxiliary Fan #2", 4));

   680               break;

   681           }

   682           break;

   683         case Chip.W83627DHG:

   684         case Chip.W83627DHGP:

   685         case Chip.W83667HG:

   686         case Chip.W83667HGB:

   687           switch (manufacturer) {

   688             case Manufacturer.ASRock:

   689               switch (model) {

   690                 case Model._880GMH_USB3: // W83627DHG-P

   691                   v.Add(new Voltage("CPU VCore", 0));

   692                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   693                   v.Add(new Voltage("+5V", 5, 15, 7.5f));

   694                   v.Add(new Voltage("+12V", 6, 56, 10));

   695                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   696                   v.Add(new Voltage("VBAT", 8, 34, 34));

   697                   t.Add(new Temperature("CPU", 0));

   698                   t.Add(new Temperature("Motherboard", 2));

   699                   f.Add(new Fan("Chassis Fan", 0));

   700                   f.Add(new Fan("CPU Fan", 1));

   701                   f.Add(new Fan("Power Fan", 2));

   702                   break;

   703                 default:

   704                   v.Add(new Voltage("CPU VCore", 0));

   705                   v.Add(new Voltage("Voltage #2", 1, true));

   706                   v.Add(new Voltage("AVCC", 2, 34, 34));

   707                   v.Add(new Voltage("3VCC", 3, 34, 34));

   708                   v.Add(new Voltage("Voltage #5", 4, true));

   709                   v.Add(new Voltage("Voltage #6", 5, true));

   710                   v.Add(new Voltage("Voltage #7", 6, true));

   711                   v.Add(new Voltage("3VSB", 7, 34, 34));

   712                   v.Add(new Voltage("VBAT", 8, 34, 34));

   713                   t.Add(new Temperature("CPU", 0));

   714                   t.Add(new Temperature("Auxiliary", 1));

   715                   t.Add(new Temperature("System", 2));

   716                   f.Add(new Fan("System Fan", 0));

   717                   f.Add(new Fan("CPU Fan", 1));

   718                   f.Add(new Fan("Auxiliary Fan", 2));

   719                   f.Add(new Fan("CPU Fan #2", 3));

   720                   f.Add(new Fan("Auxiliary Fan #2", 4));

   721                   break;

   722               }

   723               break;

   724             case Manufacturer.ASUS:

   725               switch (model) {

   726                 case Model.P6X58D_E: // W83667HG

   727                 case Model.Rampage_II_GENE: // W83667HG

   728                   v.Add(new Voltage("CPU VCore", 0));

   729                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));

   730                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   731                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   732                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   733                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   734                   v.Add(new Voltage("VBAT", 8, 34, 34));

   735                   t.Add(new Temperature("CPU", 0));

   736                   t.Add(new Temperature("Motherboard", 2));

   737                   f.Add(new Fan("Chassis Fan #1", 0));

   738                   f.Add(new Fan("CPU Fan", 1));

   739                   f.Add(new Fan("Power Fan", 2));

   740                   f.Add(new Fan("Chassis Fan #2", 3));

   741                   f.Add(new Fan("Chassis Fan #3", 4));

   742                   break;

   743                 case Model.Rampage_Extreme: // W83667HG

   744                   v.Add(new Voltage("CPU VCore", 0));

   745                   v.Add(new Voltage("+12V", 1, 12, 2));

   746                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   747                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   748                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   749                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   750                   v.Add(new Voltage("VBAT", 8, 34, 34));

   751                   t.Add(new Temperature("CPU", 0));

   752                   t.Add(new Temperature("Motherboard", 2));

   753                   f.Add(new Fan("Chassis Fan #1", 0));

   754                   f.Add(new Fan("CPU Fan", 1));

   755                   f.Add(new Fan("Power Fan", 2));

   756                   f.Add(new Fan("Chassis Fan #2", 3));

   757                   f.Add(new Fan("Chassis Fan #3", 4));

   758                   break;

   759                 default:

   760                   v.Add(new Voltage("CPU VCore", 0));

   761                   v.Add(new Voltage("Voltage #2", 1, true));

   762                   v.Add(new Voltage("AVCC", 2, 34, 34));

   763                   v.Add(new Voltage("3VCC", 3, 34, 34));

   764                   v.Add(new Voltage("Voltage #5", 4, true));

   765                   v.Add(new Voltage("Voltage #6", 5, true));

   766                   v.Add(new Voltage("Voltage #7", 6, true));

   767                   v.Add(new Voltage("3VSB", 7, 34, 34));

   768                   v.Add(new Voltage("VBAT", 8, 34, 34));

   769                   t.Add(new Temperature("CPU", 0));

   770                   t.Add(new Temperature("Auxiliary", 1));

   771                   t.Add(new Temperature("System", 2));

   772                   f.Add(new Fan("System Fan", 0));

   773                   f.Add(new Fan("CPU Fan", 1));

   774                   f.Add(new Fan("Auxiliary Fan", 2));

   775                   f.Add(new Fan("CPU Fan #2", 3));

   776                   f.Add(new Fan("Auxiliary Fan #2", 4));

   777                   break;

   778               }

   779               break;

   780             default:

   781               v.Add(new Voltage("CPU VCore", 0));

   782               v.Add(new Voltage("Voltage #2", 1, true));

   783               v.Add(new Voltage("AVCC", 2, 34, 34));

   784               v.Add(new Voltage("3VCC", 3, 34, 34));

   785               v.Add(new Voltage("Voltage #5", 4, true));

   786               v.Add(new Voltage("Voltage #6", 5, true));

   787               v.Add(new Voltage("Voltage #7", 6, true));

   788               v.Add(new Voltage("3VSB", 7, 34, 34));

   789               v.Add(new Voltage("VBAT", 8, 34, 34));

   790               t.Add(new Temperature("CPU", 0));

   791               t.Add(new Temperature("Auxiliary", 1));

   792               t.Add(new Temperature("System", 2));

   793               f.Add(new Fan("System Fan", 0));

   794               f.Add(new Fan("CPU Fan", 1));

   795               f.Add(new Fan("Auxiliary Fan", 2));

   796               f.Add(new Fan("CPU Fan #2", 3));

   797               f.Add(new Fan("Auxiliary Fan #2", 4));

   798               break;

   799           }

   800           break;

   801         case Chip.W83627HF:

   802         case Chip.W83627THF:

   803         case Chip.W83687THF:

   804           v.Add(new Voltage("CPU VCore", 0));

   805           v.Add(new Voltage("Voltage #2", 1, true));

   806           v.Add(new Voltage("Voltage #3", 2, true));

   807           v.Add(new Voltage("AVCC", 3, 34, 51));

   808           v.Add(new Voltage("Voltage #5", 4, true));

   809           v.Add(new Voltage("5VSB", 5, 34, 51));

   810           v.Add(new Voltage("VBAT", 6));

   811           t.Add(new Temperature("CPU", 0));

   812           t.Add(new Temperature("Auxiliary", 1));

   813           t.Add(new Temperature("System", 2));

   814           f.Add(new Fan("System Fan", 0));

   815           f.Add(new Fan("CPU Fan", 1));

   816           f.Add(new Fan("Auxiliary Fan", 2));

   817           break;

   818         case Chip.NCT6771F:

   819         case Chip.NCT6776F:

   820           switch (manufacturer) {

   821             case Manufacturer.ASUS:

   822               switch (model) {

   823                 case Model.P8P67_EVO: // NCT6776F

   824                 case Model.P8P67_PRO: // NCT6776F

   825                   v.Add(new Voltage("CPU VCore", 0));

   826                   v.Add(new Voltage("+12V", 1, 11, 1));

   827                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   828                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   829                   v.Add(new Voltage("+5V", 4, 12, 3));

   830                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   831                   v.Add(new Voltage("VBAT", 8, 34, 34));

   832                   t.Add(new Temperature("CPU", 0));

   833                   t.Add(new Temperature("Auxiliary", 2));

   834                   t.Add(new Temperature("Motherboard", 3));

   835                   f.Add(new Fan("Chassis Fan #1", 0));

   836                   f.Add(new Fan("CPU Fan", 1));

   837                   f.Add(new Fan("Power Fan", 2));

   838                   f.Add(new Fan("Chassis Fan #2", 3));

   839                   break;

   840                 case Model.P8P67_M_PRO: // NCT6776F

   841                   v.Add(new Voltage("CPU VCore", 0));

   842                   v.Add(new Voltage("+12V", 1, 11, 1));

   843                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   844                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   845                   v.Add(new Voltage("+5V", 4, 12, 3));

   846                   v.Add(new Voltage("Voltage #6", 5, true));

   847                   v.Add(new Voltage("Voltage #7", 6, true));

   848                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   849                   v.Add(new Voltage("VBAT", 8, 34, 34));

   850                   t.Add(new Temperature("CPU", 0));

   851                   t.Add(new Temperature("Motherboard", 3));

   852                   f.Add(new Fan("Chassis Fan #1", 0));

   853                   f.Add(new Fan("CPU Fan", 1));

   854                   f.Add(new Fan("Chassis Fan #2", 2));

   855                   f.Add(new Fan("Power Fan", 3));

   856                   f.Add(new Fan("Auxiliary Fan", 4));

   857                   break;

   858                 default:

   859                   v.Add(new Voltage("CPU VCore", 0));

   860                   v.Add(new Voltage("Voltage #2", 1, true));

   861                   v.Add(new Voltage("AVCC", 2, 34, 34));

   862                   v.Add(new Voltage("3VCC", 3, 34, 34));

   863                   v.Add(new Voltage("Voltage #5", 4, true));

   864                   v.Add(new Voltage("Voltage #6", 5, true));

   865                   v.Add(new Voltage("Voltage #7", 6, true));

   866                   v.Add(new Voltage("3VSB", 7, 34, 34));

   867                   v.Add(new Voltage("VBAT", 8, 34, 34));

   868                   t.Add(new Temperature("CPU", 0));

   869                   t.Add(new Temperature("CPU", 1));

   870                   t.Add(new Temperature("Auxiliary", 2));

   871                   t.Add(new Temperature("System", 3));

   872                   for (int i = 0; i < superIO.Fans.Length; i++)

   873                     f.Add(new Fan("Fan #" + (i + 1), i));

   874                   break;

   875               }

   876               break;

   877             default:

   878               v.Add(new Voltage("CPU VCore", 0));

   879               v.Add(new Voltage("Voltage #2", 1, true));

   880               v.Add(new Voltage("AVCC", 2, 34, 34));

   881               v.Add(new Voltage("3VCC", 3, 34, 34));

   882               v.Add(new Voltage("Voltage #5", 4, true));

   883               v.Add(new Voltage("Voltage #6", 5, true));

   884               v.Add(new Voltage("Voltage #7", 6, true));

   885               v.Add(new Voltage("3VSB", 7, 34, 34));

   886               v.Add(new Voltage("VBAT", 8, 34, 34));

   887               t.Add(new Temperature("CPU", 0));

   888               t.Add(new Temperature("CPU", 1));

   889               t.Add(new Temperature("Auxiliary", 2));

   890               t.Add(new Temperature("System", 3));

   891               for (int i = 0; i < superIO.Fans.Length; i++)

   892                 f.Add(new Fan("Fan #" + (i + 1), i));

   893               break;

   894           }

   895           break;

   896         default:

   897           for (int i = 0; i < superIO.Voltages.Length; i++)

   898             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   899           for (int i = 0; i < superIO.Temperatures.Length; i++)

   900             t.Add(new Temperature("Temperature #" + (i + 1), i));

   901           for (int i = 0; i < superIO.Fans.Length; i++)

   902             f.Add(new Fan("Fan #" + (i + 1), i));

   903           break;

   904       }

   906       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   907       foreach (Voltage voltage in v)

   908         if (voltage.Index < superIO.Voltages.Length) {

   909           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   910             voltage.Hidden, SensorType.Voltage, this, new [] {

   911             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   912               formula, voltage.Ri),

   913             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   914               formula, voltage.Rf),

   915             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   916               formula, voltage.Vf)

   917             }, settings);

   918           voltages.Add(sensor);

   919       }

   921       foreach (Temperature temperature in t)

   922         if (temperature.Index < superIO.Temperatures.Length) {

   923         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   924           SensorType.Temperature, this, new [] {

   925           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   926         }, settings);

   927         temperatures.Add(sensor);

   928       }

   930       foreach (Fan fan in f)

   931         if (fan.Index < superIO.Fans.Length) {

   932           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   933             this, settings);

   934           fans.Add(sensor);

   935         }

   936     }

   938     public override HardwareType HardwareType {

   939       get { return HardwareType.SuperIO; }

   940     }

   942     public override IHardware Parent {

   943       get { return mainboard; }

   944     }

   947     public override string GetReport() {

   948       return superIO.GetReport();

   949     }

   951     public override void Update() {

   952       superIO.Update();

   954       foreach (Sensor sensor in voltages) {

   955         float? value = readVoltage(sensor.Index);

   956         if (value.HasValue) {

   957           sensor.Value = value + (value - sensor.Parameters[2].Value) *

   958             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

   959           ActivateSensor(sensor);

   960         }

   961       }

   963       foreach (Sensor sensor in temperatures) {

   964         float? value = readTemperature(sensor.Index);

   965         if (value.HasValue) {

   966           sensor.Value = value + sensor.Parameters[0].Value;

   967           ActivateSensor(sensor);

   968         }

   969       }

   971       foreach (Sensor sensor in fans) {

   972         float? value = readFan(sensor.Index);

   973         if (value.HasValue) {

   974           sensor.Value = value;

   975           if (value.Value > 0)

   976             ActivateSensor(sensor);

   977         }

   978       }

   980       postUpdate();

   981     }

   983     private class Voltage {

   984       public readonly string Name;

   985       public readonly int Index;

   986       public readonly float Ri;

   987       public readonly float Rf;

   988       public readonly float Vf;

   989       public readonly bool Hidden;

   991       public Voltage(string name, int index) :

   992         this(name, index, false) { }

   994       public Voltage(string name, int index, bool hidden) :

   995         this(name, index, 0, 1, 0, hidden) { }

   997       public Voltage(string name, int index, float ri, float rf) :

   998         this(name, index, ri, rf, 0, false) { }

  1000       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)

  1002       public Voltage(string name, int index,

  1003         float ri, float rf, float vf, bool hidden)

  1004       {

  1005         this.Name = name;

  1006         this.Index = index;

  1007         this.Ri = ri;

  1008         this.Rf = rf;

  1009         this.Vf = vf;

  1010         this.Hidden = hidden;

  1011       }

  1012     }

  1014     private class Temperature {

  1015       public readonly string Name;

  1016       public readonly int Index;

  1018       public Temperature(string name, int index) {

  1019         this.Name = name;

  1020         this.Index = index;

  1021       }

  1022     }

  1024     private class Fan {

  1025       public readonly string Name;

  1026       public readonly int Index;

  1028       public Fan(string name, int index) {

  1029         this.Name = name;

  1030         this.Index = index;

  1031       }

  1032     }

  1033   }

  1034 }

author	moel.mich
	Sun, 24 Jul 2011 11:29:26 +0000
changeset 311	d687db11035c
parent 310	7fe8c37b1b84
child 312	35fb76b88d94
permissions	-rw-r--r--