/*

   Version: MPL 1.1/GPL 2.0/LGPL 2.1

   The contents of this file are subject to the Mozilla Public License Version

   1.1 (the "License"); you may not use this file except in compliance with

   the License. You may obtain a copy of the License at

   http://www.mozilla.org/MPL/

   Software distributed under the License is distributed on an "AS IS" basis,

   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

   for the specific language governing rights and limitations under the License.

   The Original Code is the Open Hardware Monitor code.

   The Initial Developer of the Original Code is 

   Michael Möller <m.moeller@gmx.ch>.

   Portions created by the Initial Developer are Copyright (C) 2009-2010

   the Initial Developer. All Rights Reserved.

   Contributor(s):

   Alternatively, the contents of this file may be used under the terms of

   either the GNU General Public License Version 2 or later (the "GPL"), or

   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

   in which case the provisions of the GPL or the LGPL are applicable instead

   of those above. If you wish to allow use of your version of this file only

   under the terms of either the GPL or the LGPL, and not to allow others to

   use your version of this file under the terms of the MPL, indicate your

   decision by deleting the provisions above and replace them with the notice

   and other provisions required by the GPL or the LGPL. If you do not delete

   the provisions above, a recipient may use your version of this file under

   the terms of any one of the MPL, the GPL or the LGPL.

 */

 using System;

 using System.Globalization;

 using System.Text;

 namespace OpenHardwareMonitor.Hardware.LPC {

   internal class W836XX : ISuperIO {

     private readonly ushort address;

     private readonly byte revision;

     private readonly Chip chip;

     private readonly float?[] voltages = new float?[0];

     private readonly float?[] temperatures = new float?[0];    

     private readonly float?[] fans = new float?[0];

     private readonly bool[] peciTemperature = new bool[0];

     private readonly byte[] voltageRegister = new byte[0];

     private readonly byte[] voltageBank = new byte[0];

     private readonly float voltageGain = 0.008f;

     // Consts 

     private const ushort WINBOND_VENDOR_ID = 0x5CA3;

     private const byte HIGH_BYTE = 0x80;

     // Hardware Monitor

     private const byte ADDRESS_REGISTER_OFFSET = 0x05;

     private const byte DATA_REGISTER_OFFSET = 0x06;

     // Hardware Monitor Registers

     private const byte VOLTAGE_VBAT_REG = 0x51;

     private const byte BANK_SELECT_REGISTER = 0x4E;

     private const byte VENDOR_ID_REGISTER = 0x4F;

     private const byte TEMPERATURE_SOURCE_SELECT_REG = 0x49;

     private readonly byte[] TEMPERATURE_REG = new byte[] { 0x50, 0x50, 0x27 };

     private readonly byte[] TEMPERATURE_BANK = new byte[] { 1, 2, 0 };

     private readonly byte[] FAN_TACHO_REG = 

       new byte[] { 0x28, 0x29, 0x2A, 0x3F, 0x53 };

     private readonly byte[] FAN_TACHO_BANK = 

       new byte[] { 0, 0, 0, 0, 5 };       

     private readonly byte[] FAN_BIT_REG =

       new byte[] { 0x47, 0x4B, 0x4C, 0x59, 0x5D };

     private readonly byte[] FAN_DIV_BIT0 = new byte[] { 36, 38, 30, 8, 10 };

     private readonly byte[] FAN_DIV_BIT1 = new byte[] { 37, 39, 31, 9, 11 };

     private readonly byte[] FAN_DIV_BIT2 = new byte[] { 5, 6, 7, 23, 15 };

     private byte ReadByte(byte bank, byte register) {

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);

       WinRing0.WriteIoPortByte(

          (ushort)(address + DATA_REGISTER_OFFSET), bank);

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);

       return WinRing0.ReadIoPortByte(

         (ushort)(address + DATA_REGISTER_OFFSET));

     } 

     private void WriteByte(byte bank, byte register, byte value) {

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), BANK_SELECT_REGISTER);

       WinRing0.WriteIoPortByte(

          (ushort)(address + DATA_REGISTER_OFFSET), bank);

       WinRing0.WriteIoPortByte(

          (ushort)(address + ADDRESS_REGISTER_OFFSET), register);

       WinRing0.WriteIoPortByte(

          (ushort)(address + DATA_REGISTER_OFFSET), value); 

     }

     public W836XX(Chip chip, byte revision, ushort address) {

       this.address = address;

       this.revision = revision;

       this.chip = chip;

       if (!IsWinbondVendor())

         return;

       temperatures = new float?[3];

       peciTemperature = new bool[3];

       switch (chip) {

         case Chip.W83667HG:

         case Chip.W83667HGB:

           // note temperature sensor registers that read PECI

           byte flag = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);

           peciTemperature[0] = (flag & 0x04) != 0;

           peciTemperature[1] = (flag & 0x40) != 0;

           peciTemperature[2] = false;

           break;

         case Chip.W83627DHG:        

         case Chip.W83627DHGP:

           // note temperature sensor registers that read PECI

           byte sel = ReadByte(0, TEMPERATURE_SOURCE_SELECT_REG);

           peciTemperature[0] = (sel & 0x07) != 0;

           peciTemperature[1] = (sel & 0x70) != 0;

           peciTemperature[2] = false;

           break;

         default:

           // no PECI support

           peciTemperature[0] = false;

           peciTemperature[1] = false;

           peciTemperature[2] = false;

           break;

       }

       switch (chip) {

         case Chip.W83627EHF:

           voltages = new float?[10];

           voltageRegister = new byte[] { 

             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51, 0x52 };

           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5, 5 };

           voltageGain = 0.008f;

           fans = new float?[5];

           break;

         case Chip.W83627DHG:

         case Chip.W83627DHGP:        

         case Chip.W83667HG:

         case Chip.W83667HGB:

           voltages = new float?[9];

           voltageRegister = new byte[] { 

             0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x50, 0x51 };

           voltageBank = new byte[] { 0, 0, 0, 0, 0, 0, 0, 5, 5 };

           voltageGain = 0.008f;

           fans = new float?[5];

           break;

         case Chip.W83627HF:

         case Chip.W83627THF:

         case Chip.W83687THF:

           voltages = new float?[7];

           voltageRegister = new byte[] { 

             0x20, 0x21, 0x22, 0x23, 0x24, 0x50, 0x51 };

           voltageBank = new byte[] { 0, 0, 0, 0, 0, 5, 5 };

           voltageGain = 0.016f;

           fans = new float?[3];         

           break;

       }

     }    

     private bool IsWinbondVendor() {

       ushort vendorId =

         (ushort)((ReadByte(HIGH_BYTE, VENDOR_ID_REGISTER) << 8) |

            ReadByte(0, VENDOR_ID_REGISTER));

       return vendorId == WINBOND_VENDOR_ID;

     }

     private static ulong SetBit(ulong target, int bit, int value) {

       if ((value & 1) != value)

         throw new ArgumentException("Value must be one bit only.");

       if (bit < 0 || bit > 63)

         throw new ArgumentException("Bit out of range.");

       ulong mask = (((ulong)1) << bit);

       return value > 0 ? target | mask : target & ~mask;

     }

     public Chip Chip { get { return chip; } }

     public float?[] Voltages { get { return voltages; } }

     public float?[] Temperatures { get { return temperatures; } }

     public float?[] Fans { get { return fans; } }

     public void Update() {

       if (!WinRing0.WaitIsaBusMutex(10))

         return;

       for (int i = 0; i < voltages.Length; i++) {

         if (voltageRegister[i] != VOLTAGE_VBAT_REG) {

           // two special VCore measurement modes for W83627THF

           float fvalue;

           if ((chip == Chip.W83627HF || chip == Chip.W83627THF || 

             chip == Chip.W83687THF) && i == 0) 

           {

             byte vrmConfiguration = ReadByte(0, 0x18);

             int value = ReadByte(voltageBank[i], voltageRegister[i]);

             if ((vrmConfiguration & 0x01) == 0)

               fvalue = 0.016f * value; // VRM8 formula

             else

               fvalue = 0.00488f * value + 0.69f; // VRM9 formula

           } else {

             int value = ReadByte(voltageBank[i], voltageRegister[i]);

             fvalue = voltageGain * value;

           }

           if (fvalue > 0)

             voltages[i] = fvalue;

           else

             voltages[i] = null;

         } else {

           // Battery voltage

           bool valid = (ReadByte(0, 0x5D) & 0x01) > 0;

           if (valid) {

             voltages[i] = voltageGain * ReadByte(5, VOLTAGE_VBAT_REG);

           } else {

             voltages[i] = null;

           }

         }

       }

       for (int i = 0; i < temperatures.Length; i++) {

         int value = ((sbyte)ReadByte(TEMPERATURE_BANK[i], 

           TEMPERATURE_REG[i])) << 1;

         if (TEMPERATURE_BANK[i] > 0) 

           value |= ReadByte(TEMPERATURE_BANK[i],

             (byte)(TEMPERATURE_REG[i] + 1)) >> 7;

         float temperature = value / 2.0f;

         if (temperature <= 125 && temperature >= -55 && !peciTemperature[i]) {

           temperatures[i] = temperature;

         } else {

           temperatures[i] = null;

         }

       }

       ulong bits = 0;

       for (int i = 0; i < FAN_BIT_REG.Length; i++)

         bits = (bits << 8) | ReadByte(0, FAN_BIT_REG[i]);

       ulong newBits = bits;

       for (int i = 0; i < fans.Length; i++) {

         int count = ReadByte(FAN_TACHO_BANK[i], FAN_TACHO_REG[i]);

         // assemble fan divisor

         int divisorBits = (int)(

           (((bits >> FAN_DIV_BIT2[i]) & 1) << 2) |

           (((bits >> FAN_DIV_BIT1[i]) & 1) << 1) |

            ((bits >> FAN_DIV_BIT0[i]) & 1));

         int divisor = 1 << divisorBits;

         float value = (count < 0xff) ? 1.35e6f / (count * divisor) : 0;

         fans[i] = value;

         // update fan divisor

         if (count > 192 && divisorBits < 7) 

           divisorBits++;

         if (count < 96 && divisorBits > 0)

           divisorBits--;

         newBits = SetBit(newBits, FAN_DIV_BIT2[i], (divisorBits >> 2) & 1);

         newBits = SetBit(newBits, FAN_DIV_BIT1[i], (divisorBits >> 1) & 1);

         newBits = SetBit(newBits, FAN_DIV_BIT0[i], divisorBits & 1);

       }

       // write new fan divisors 

       for (int i = FAN_BIT_REG.Length - 1; i >= 0; i--) {

         byte oldByte = (byte)(bits & 0xFF);

         byte newByte = (byte)(newBits & 0xFF);

         bits = bits >> 8;

         newBits = newBits >> 8;

         if (oldByte != newByte) 

           WriteByte(0, FAN_BIT_REG[i], newByte);        

       }

       WinRing0.ReleaseIsaBusMutex();

     }

     public string GetReport() {

       StringBuilder r = new StringBuilder();

       r.AppendLine("LPC " + this.GetType().Name);

       r.AppendLine();

       r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));

       r.Append("Chip revision: 0x");

       r.AppendLine(revision.ToString("X", CultureInfo.InvariantCulture));

       r.Append("Base Adress: 0x");

       r.AppendLine(address.ToString("X4", CultureInfo.InvariantCulture));

       r.AppendLine();

       if (!WinRing0.WaitIsaBusMutex(100))

         return r.ToString();

       r.AppendLine("Hardware Monitor Registers");

       r.AppendLine();

       r.AppendLine("      00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");

       r.AppendLine();

       for (int i = 0; i <= 0x7; i++) {

         r.Append(" ");

         r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture)); 

         r.Append("  ");

         for (int j = 0; j <= 0xF; j++) {

           r.Append(" ");

           r.Append(ReadByte(0, (byte)((i << 4) | j)).ToString(

             "X2", CultureInfo.InvariantCulture));

         }

         r.AppendLine();

       }

       for (int k = 1; k <= 15; k++) {

         r.AppendLine("Bank " + k);

         for (int i = 0x5; i < 0x6; i++) {

           r.Append(" "); 

           r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture)); 

           r.Append("  ");

           for (int j = 0; j <= 0xF; j++) {

             r.Append(" ");

             r.Append(ReadByte((byte)(k), (byte)((i << 4) | j)).ToString(

               "X2", CultureInfo.InvariantCulture));

           }

           r.AppendLine();

         }

       }

       r.AppendLine();

       WinRing0.ReleaseIsaBusMutex();

       return r.ToString();

     }

   } 

 }