Fixed the Intel Sandy Bridge CPU core clock calculation.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
40 using System.Diagnostics;
41 using System.Globalization;
42 using System.Runtime.InteropServices;
44 using System.Threading;
46 namespace OpenHardwareMonitor.Hardware.CPU {
48 internal sealed class AMD10CPU : AMDCPU {
50 private readonly Sensor coreTemperature;
51 private readonly Sensor[] coreClocks;
52 private readonly Sensor busClock;
54 private const uint PERF_CTL_0 = 0xC0010000;
55 private const uint PERF_CTR_0 = 0xC0010004;
56 private const uint P_STATE_0 = 0xC0010064;
57 private const uint COFVID_STATUS = 0xC0010071;
59 private const byte MISCELLANEOUS_CONTROL_FUNCTION = 3;
60 private const ushort MISCELLANEOUS_CONTROL_DEVICE_ID = 0x1203;
61 private const uint REPORTED_TEMPERATURE_CONTROL_REGISTER = 0xA4;
63 private readonly uint miscellaneousControlAddress;
65 private double timeStampCounterMultiplier;
67 public AMD10CPU(int processorIndex, CPUID[][] cpuid, ISettings settings)
68 : base(processorIndex, cpuid, settings)
70 // AMD family 10h processors support only one temperature sensor
71 coreTemperature = new Sensor(
72 "Core" + (coreCount > 1 ? " #1 - #" + coreCount : ""), 0,
73 SensorType.Temperature, this, new [] {
74 new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
77 // get the pci address for the Miscellaneous Control registers
78 miscellaneousControlAddress = GetPciAddress(
79 MISCELLANEOUS_CONTROL_FUNCTION, MISCELLANEOUS_CONTROL_DEVICE_ID);
81 busClock = new Sensor("Bus Speed", 0, SensorType.Clock, this, settings);
82 coreClocks = new Sensor[coreCount];
83 for (int i = 0; i < coreClocks.Length; i++) {
84 coreClocks[i] = new Sensor(CoreString(i), i + 1, SensorType.Clock,
86 if (HasTimeStampCounter)
87 ActivateSensor(coreClocks[i]);
90 // set affinity to the first thread for all frequency estimations
91 ulong mask = ThreadAffinity.Set(1UL << cpuid[0][0].Thread);
94 Ring0.Rdmsr(PERF_CTL_0, out ctlEax, out ctlEdx);
96 Ring0.Rdmsr(PERF_CTR_0, out ctrEax, out ctrEdx);
98 timeStampCounterMultiplier = estimateTimeStampCounterMultiplier();
100 // restore the performance counter registers
101 Ring0.Wrmsr(PERF_CTL_0, ctlEax, ctlEdx);
102 Ring0.Wrmsr(PERF_CTR_0, ctrEax, ctrEdx);
104 // restore the thread affinity.
105 ThreadAffinity.Set(mask);
110 private double estimateTimeStampCounterMultiplier() {
111 // preload the function
112 estimateTimeStampCounterMultiplier(0);
113 estimateTimeStampCounterMultiplier(0);
115 // estimate the multiplier
116 List<double> estimate = new List<double>(3);
117 for (int i = 0; i < 3; i++)
118 estimate.Add(estimateTimeStampCounterMultiplier(0.025));
123 private double estimateTimeStampCounterMultiplier(double timeWindow) {
126 // select event "076h CPU Clocks not Halted" and enable the counter
127 Ring0.Wrmsr(PERF_CTL_0,
128 (1 << 22) | // enable performance counter
129 (1 << 17) | // count events in user mode
130 (1 << 16) | // count events in operating-system mode
133 // set the counter to 0
134 Ring0.Wrmsr(PERF_CTR_0, 0, 0);
136 long ticks = (long)(timeWindow * Stopwatch.Frequency);
137 uint lsbBegin, msbBegin, lsbEnd, msbEnd;
139 long timeBegin = Stopwatch.GetTimestamp() +
140 (long)Math.Ceiling(0.001 * ticks);
141 long timeEnd = timeBegin + ticks;
142 while (Stopwatch.GetTimestamp() < timeBegin) { }
143 Ring0.Rdmsr(PERF_CTR_0, out lsbBegin, out msbBegin);
144 while (Stopwatch.GetTimestamp() < timeEnd) { }
145 Ring0.Rdmsr(PERF_CTR_0, out lsbEnd, out msbEnd);
147 Ring0.Rdmsr(COFVID_STATUS, out eax, out edx);
148 uint cpuDid = (eax >> 6) & 7;
149 uint cpuFid = eax & 0x1F;
150 double coreMultiplier = MultiplierFromIDs(cpuDid, cpuFid);
152 ulong countBegin = ((ulong)msbBegin << 32) | lsbBegin;
153 ulong countEnd = ((ulong)msbEnd << 32) | lsbEnd;
155 double coreFrequency = 1e-6 *
156 (((double)(countEnd - countBegin)) * Stopwatch.Frequency) /
157 (timeEnd - timeBegin);
159 double busFrequency = coreFrequency / coreMultiplier;
160 return 0.5 * Math.Round(2 * TimeStampCounterFrequency / busFrequency);
163 protected override uint[] GetMSRs() {
164 return new uint[] { PERF_CTL_0, PERF_CTR_0, P_STATE_0, COFVID_STATUS };
167 public override string GetReport() {
168 StringBuilder r = new StringBuilder();
169 r.Append(base.GetReport());
171 r.Append("Miscellaneous Control Address: 0x");
172 r.AppendLine((miscellaneousControlAddress).ToString("X",
173 CultureInfo.InvariantCulture));
174 r.Append("Time Stamp Counter Multiplier: ");
175 r.AppendLine(timeStampCounterMultiplier.ToString(
176 CultureInfo.InvariantCulture));
182 private static double MultiplierFromIDs(uint divisorID, uint frequencyID) {
183 return 0.5 * (frequencyID + 0x10) / (1 << (int)divisorID);
186 public override void Update() {
189 if (miscellaneousControlAddress != Ring0.InvalidPciAddress) {
191 if (Ring0.ReadPciConfig(miscellaneousControlAddress,
192 REPORTED_TEMPERATURE_CONTROL_REGISTER, out value)) {
193 coreTemperature.Value = ((value >> 21) & 0x7FF) / 8.0f +
194 coreTemperature.Parameters[0].Value;
195 ActivateSensor(coreTemperature);
197 DeactivateSensor(coreTemperature);
201 if (HasTimeStampCounter) {
202 double newBusClock = 0;
204 for (int i = 0; i < coreClocks.Length; i++) {
208 if (Ring0.RdmsrTx(COFVID_STATUS, out curEax, out curEdx,
209 1UL << cpuid[i][0].Thread))
211 // 8:6 CpuDid: current core divisor ID
212 // 5:0 CpuFid: current core frequency ID
213 uint cpuDid = (curEax >> 6) & 7;
214 uint cpuFid = curEax & 0x1F;
215 double multiplier = MultiplierFromIDs(cpuDid, cpuFid);
217 coreClocks[i].Value =
218 (float)(multiplier * TimeStampCounterFrequency /
219 timeStampCounterMultiplier);
221 (float)(TimeStampCounterFrequency / timeStampCounterMultiplier);
223 coreClocks[i].Value = (float)TimeStampCounterFrequency;
227 if (newBusClock > 0) {
228 this.busClock.Value = (float)newBusClock;
229 ActivateSensor(this.busClock);