3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
40 using System.Globalization;
43 namespace OpenHardwareMonitor.Hardware.TBalancer {
44 internal class TBalancer : IHardware {
46 private ISettings settings;
47 private int portIndex;
48 private FT_HANDLE handle;
49 private byte protocolVersion;
50 private Sensor[] digitalTemperatures = new Sensor[8];
51 private Sensor[] analogTemperatures = new Sensor[4];
52 private Sensor[] sensorhubTemperatures = new Sensor[6];
53 private Sensor[] sensorhubFlows = new Sensor[2];
54 private Sensor[] fans = new Sensor[4];
55 private Sensor[] controls = new Sensor[4];
56 private Sensor[] miniNGTemperatures = new Sensor[4];
57 private Sensor[] miniNGFans = new Sensor[4];
58 private Sensor[] miniNGControls = new Sensor[4];
59 private List<ISensor> active = new List<ISensor>();
60 private List<ISensor> deactivating = new List<ISensor>();
61 private int[] primaryData = new int[0];
62 private int[] alternativeData = new int[0];
64 public const byte STARTFLAG = 100;
65 public const byte ENDFLAG = 254;
67 private delegate void MethodDelegate();
68 private MethodDelegate alternativeRequest;
70 public TBalancer(int portIndex, byte protocolVersion, ISettings settings) {
71 this.settings = settings;
73 this.portIndex = portIndex;
74 this.protocolVersion = protocolVersion;
76 ParameterDescription[] parameter = new ParameterDescription[] {
77 new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
80 for (int i = 0; i < digitalTemperatures.Length; i++)
81 digitalTemperatures[i] = new Sensor("Digital Sensor " + i,
82 offset + i, SensorType.Temperature, this, parameter, settings);
83 offset += digitalTemperatures.Length;
85 for (int i = 0; i < analogTemperatures.Length; i++)
86 analogTemperatures[i] = new Sensor("Analog Sensor " + (i + 1),
87 offset + i, SensorType.Temperature, this, parameter, settings);
88 offset += analogTemperatures.Length;
90 for (int i = 0; i < sensorhubTemperatures.Length; i++)
91 sensorhubTemperatures[i] = new Sensor("Sensorhub Sensor " + i,
92 offset + i, SensorType.Temperature, this, parameter, settings);
93 offset += sensorhubTemperatures.Length;
95 for (int i = 0; i < miniNGTemperatures.Length; i++)
96 miniNGTemperatures[i] = new Sensor("miniNG #" + (i / 2 + 1) +
97 " Sensor " + (i % 2 + 1), offset + i, SensorType.Temperature,
98 this, parameter, settings);
99 offset += miniNGTemperatures.Length;
101 for (int i = 0; i < sensorhubFlows.Length; i++)
102 sensorhubFlows[i] = new Sensor("Flowmeter " + (i + 1),
103 i, SensorType.Flow, this, new ParameterDescription[] {
104 new ParameterDescription("Impulse Rate",
105 "The impulse rate of the flowmeter in pulses/L", 509)
108 for (int i = 0; i < controls.Length; i++) {
109 controls[i] = new Sensor("Fan Channel " + i, i, SensorType.Control,
113 for (int i = 0; i < miniNGControls.Length; i++) {
114 miniNGControls[i] = new Sensor("miniNG #" + (i / 2 + 1) +
115 " Fan Channel " + (i % 2 + 1), 4 + i, SensorType.Control, this,
119 alternativeRequest = new MethodDelegate(DelayedAlternativeRequest);
125 private void ActivateSensor(Sensor sensor) {
126 deactivating.Remove(sensor);
127 if (!active.Contains(sensor)) {
129 if (SensorAdded != null)
134 private void DeactivateSensor(Sensor sensor) {
135 if (deactivating.Contains(sensor)) {
136 active.Remove(sensor);
137 deactivating.Remove(sensor);
138 if (SensorRemoved != null)
139 SensorRemoved(sensor);
140 } else if (active.Contains(sensor)) {
141 deactivating.Add(sensor);
145 private void ReadminiNG(int[] data, int number) {
146 int offset = 1 + number * 65;
148 if (data[offset + 61] != ENDFLAG)
151 for (int i = 0; i < 2; i++) {
152 Sensor sensor = miniNGTemperatures[number * 2 + i];
153 if (data[offset + 7 + i] > 0) {
154 sensor.Value = 0.5f * data[offset + 7 + i] +
155 sensor.Parameters[0].Value;
156 ActivateSensor(sensor);
158 DeactivateSensor(sensor);
162 for (int i = 0; i < 2; i++) {
163 if (miniNGFans[number * 2 + i] == null)
164 miniNGFans[number * 2 + i] =
165 new Sensor("miniNG #" + (number + 1) + " Fan Channel " + (i + 1),
166 4 + number * 2 + i, SensorType.Fan, this, settings);
168 Sensor sensor = miniNGFans[number * 2 + i];
170 sensor.Value = 20.0f * data[offset + 43 + 2 * i];
171 ActivateSensor(sensor);
174 for (int i = 0; i < 2; i++) {
175 Sensor sensor = miniNGControls[number * 2 + i];
176 sensor.Value = data[offset + 15 + i];
177 ActivateSensor(sensor);
181 private void ReadData() {
182 int[] data = new int[285];
183 for (int i = 0; i < data.Length; i++)
184 data[i] = FTD2XX.ReadByte(handle);
186 if (data[0] != STARTFLAG) {
187 FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_RX);
191 if (data[1] == 255 || data[1] == 88) { // bigNG
193 if (data[274] != protocolVersion)
196 this.primaryData = data;
198 for (int i = 0; i < digitalTemperatures.Length; i++)
199 if (data[238 + i] > 0) {
200 digitalTemperatures[i].Value = 0.5f * data[238 + i] +
201 digitalTemperatures[i].Parameters[0].Value;
202 ActivateSensor(digitalTemperatures[i]);
204 DeactivateSensor(digitalTemperatures[i]);
207 for (int i = 0; i < analogTemperatures.Length; i++)
208 if (data[260 + i] > 0) {
209 analogTemperatures[i].Value = 0.5f * data[260 + i] +
210 analogTemperatures[i].Parameters[0].Value;
211 ActivateSensor(analogTemperatures[i]);
213 DeactivateSensor(analogTemperatures[i]);
216 for (int i = 0; i < sensorhubTemperatures.Length; i++)
217 if (data[246 + i] > 0) {
218 sensorhubTemperatures[i].Value = 0.5f * data[246 + i] +
219 sensorhubTemperatures[i].Parameters[0].Value;
220 ActivateSensor(sensorhubTemperatures[i]);
222 DeactivateSensor(sensorhubTemperatures[i]);
225 for (int i = 0; i < sensorhubFlows.Length; i++)
226 if (data[231 + i] > 0 && data[234] > 0) {
227 float pulsesPerSecond = (data[231 + i] * 4.0f) / data[234];
228 float pulsesPerLiter = sensorhubFlows[i].Parameters[0].Value;
229 sensorhubFlows[i].Value = pulsesPerSecond * 3600 / pulsesPerLiter;
230 ActivateSensor(sensorhubFlows[i]);
232 DeactivateSensor(sensorhubFlows[i]);
235 for (int i = 0; i < fans.Length; i++) {
236 float maxRPM = 11.5f * ((data[149 + 2 * i] << 8) | data[148 + 2 * i]);
239 fans[i] = new Sensor("Fan Channel " + i, i, SensorType.Fan,
240 this, new ParameterDescription[] {
241 new ParameterDescription("MaxRPM",
242 "Maximum revolutions per minute (RPM) of the fan.", maxRPM)
246 if ((data[136] & (1 << i)) == 0) // pwm mode
247 value = 0.02f * data[137 + i];
249 value = 0.01f * data[141 + i];
251 fans[i].Value = fans[i].Parameters[0].Value * value;
252 ActivateSensor(fans[i]);
254 controls[i].Value = 100 * value;
255 ActivateSensor(controls[i]);
258 } else if (data[1] == 253) { // miniNG #1
259 this.alternativeData = data;
263 if (data[66] == 253) // miniNG #2
268 public HardwareType HardwareType {
269 get { return HardwareType.TBalancer; }
273 get { return "T-Balancer bigNG"; }
276 public Identifier Identifier {
278 return new Identifier("bigng",
279 this.portIndex.ToString(CultureInfo.InvariantCulture));
283 public IHardware[] SubHardware {
284 get { return new IHardware[0]; }
287 public virtual IHardware Parent {
291 public ISensor[] Sensors {
292 get { return active.ToArray(); }
295 public string GetReport() {
296 StringBuilder r = new StringBuilder();
298 r.AppendLine("T-Balancer bigNG");
300 r.Append("Port Index: ");
301 r.AppendLine(portIndex.ToString(CultureInfo.InvariantCulture));
304 r.AppendLine("Primary System Information Answer");
306 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
308 for (int i = 0; i <= 0x11; i++) {
310 r.Append((i << 4).ToString("X3", CultureInfo.InvariantCulture));
312 for (int j = 0; j <= 0xF; j++) {
313 int index = ((i << 4) | j);
314 if (index < primaryData.Length) {
316 r.Append(primaryData[index].ToString("X2", CultureInfo.InvariantCulture));
323 if (alternativeData.Length > 0) {
324 r.AppendLine("Alternative System Information Answer");
326 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
328 for (int i = 0; i <= 0x11; i++) {
330 r.Append((i << 4).ToString("X3", CultureInfo.InvariantCulture));
332 for (int j = 0; j <= 0xF; j++) {
333 int index = ((i << 4) | j);
334 if (index < alternativeData.Length) {
336 r.Append(alternativeData[index].ToString("X2", CultureInfo.InvariantCulture));
347 private void DelayedAlternativeRequest() {
348 System.Threading.Thread.Sleep(500);
349 FTD2XX.Write(handle, new byte[] { 0x37 });
353 FTD2XX.FT_Open(portIndex, out handle);
354 FTD2XX.FT_SetBaudRate(handle, 19200);
355 FTD2XX.FT_SetDataCharacteristics(handle, 8, 1, 0);
356 FTD2XX.FT_SetFlowControl(handle, FT_FLOW_CONTROL.FT_FLOW_RTS_CTS, 0x11,
358 FTD2XX.FT_SetTimeouts(handle, 1000, 1000);
359 FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_ALL);
362 public void Update() {
363 while (FTD2XX.BytesToRead(handle) >= 285)
365 if (FTD2XX.BytesToRead(handle) == 1)
366 FTD2XX.ReadByte(handle);
368 FTD2XX.Write(handle, new byte[] { 0x38 });
369 alternativeRequest.BeginInvoke(null, null);
372 public void Close() {
373 FTD2XX.FT_Close(handle);
376 public event SensorEventHandler SensorAdded;
377 public event SensorEventHandler SensorRemoved;
379 public void Accept(IVisitor visitor) {
381 throw new ArgumentNullException("visitor");
382 visitor.VisitHardware(this);
385 public void Traverse(IVisitor visitor) { }