/*

   Version: MPL 1.1/GPL 2.0/LGPL 2.1

   The contents of this file are subject to the Mozilla Public License Version

   1.1 (the "License"); you may not use this file except in compliance with

   the License. You may obtain a copy of the License at

   http://www.mozilla.org/MPL/

   Software distributed under the License is distributed on an "AS IS" basis,

   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

   for the specific language governing rights and limitations under the License.

   The Original Code is the Open Hardware Monitor code.

   The Initial Developer of the Original Code is 

   Michael Möller <m.moeller@gmx.ch>.

   Portions created by the Initial Developer are Copyright (C) 2009-2010

   the Initial Developer. All Rights Reserved.

   Contributor(s):

   Alternatively, the contents of this file may be used under the terms of

   either the GNU General Public License Version 2 or later (the "GPL"), or

   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

   in which case the provisions of the GPL or the LGPL are applicable instead

   of those above. If you wish to allow use of your version of this file only

   under the terms of either the GPL or the LGPL, and not to allow others to

   use your version of this file under the terms of the MPL, indicate your

   decision by deleting the provisions above and replace them with the notice

   and other provisions required by the GPL or the LGPL. If you do not delete

   the provisions above, a recipient may use your version of this file under

   the terms of any one of the MPL, the GPL or the LGPL.

 */

 using System;

 using System.Collections.Generic;

 using System.Drawing;

 using OpenHardwareMonitor.Hardware.LPC;

 namespace OpenHardwareMonitor.Hardware.Mainboard {

   public class SuperIOHardware : Hardware {

     private ISuperIO superIO;

     private Image icon;

     protected readonly string name;

     private List<Sensor> voltages = new List<Sensor>();

     private List<Sensor> temperatures = new List<Sensor>();

     private List<Sensor> fans = new List<Sensor>();  

     public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer, 

       Model model) 

     {

       this.superIO = superIO;

       this.icon = Utilities.EmbeddedResources.GetImage("chip.png");

       switch (superIO.Chip) {

         case Chip.F71858: name = "Fintek F71858"; break;

         case Chip.F71862: name = "Fintek F71862"; break;

         case Chip.F71869: name = "Fintek F71869"; break;

         case Chip.F71882: name = "Fintek F71882"; break;

         case Chip.F71889ED: name = "Fintek F71889ED"; break;

         case Chip.F71889F: name = "Fintek F71889F"; break;

         case Chip.IT8712F: this.name = "ITE IT8712F"; break;

         case Chip.IT8716F: this.name = "ITE IT8716F"; break;

         case Chip.IT8718F: this.name = "ITE IT8718F"; break;

         case Chip.IT8720F: this.name = "ITE IT8720F"; break;

         case Chip.IT8726F: this.name = "ITE IT8726F"; break;

         case Chip.W83627DHG: this.name = "Winbond W83627DHG"; break;

         case Chip.W83627DHGP: this.name = "Winbond W83627DHG-P"; break;

         case Chip.W83627EHF: this.name = "Winbond W83627EHF"; break;

         case Chip.W83627HF: this.name = "Winbond W83627HF"; break;

         case Chip.W83627THF: this.name = "Winbond W83627THF"; break;

         case Chip.W83667HG: this.name = "Winbond W83667HG"; break;

         case Chip.W83667HGB: this.name = "Winbond W83667HG-B"; break;

         case Chip.W83687THF: this.name = "Winbond W83687THF"; break;

         case Chip.Unknown: this.name = "Unkown"; break;

       }

       List<Voltage> v = new List<Voltage>();

       List<Temperature> t = new List<Temperature>();

       List<Fan> f = new List<Fan>();

       switch (superIO.Chip) {

         case Chip.IT8712F:

         case Chip.IT8716F:

         case Chip.IT8718F:

         case Chip.IT8720F:

         case Chip.IT8726F:

           switch (manufacturer) {

             case Manufacturer.ASUS:

               switch (model) {

                 case Model.Crosshair_III_Formula:

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("CPU", 0));

                   for (int i = 0; i < superIO.Fans.Length; i++)

                     f.Add(new Fan("Fan #" + (i + 1), i));

                   break;

                 case Model.M2N_SLI_DELUXE:                

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("+3.3V", 1));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("CPU", 0));

                   t.Add(new Temperature("Motherboard", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("Chassis Fan #1", 1));

                   f.Add(new Fan("Power Fan", 2));

                   break;

                 case Model.M4A79XTD_EVO:              

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("CPU", 0));

                   t.Add(new Temperature("Motherboard", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("Chassis Fan #1", 1));

                   f.Add(new Fan("Chassis Fan #2", 2));

                   break;

                 default:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("Voltage #2", 1, true));

                   v.Add(new Voltage("Voltage #3", 2, true));

                   v.Add(new Voltage("Voltage #4", 3, true));

                   v.Add(new Voltage("Voltage #5", 4, true));

                   v.Add(new Voltage("Voltage #6", 5, true));

                   v.Add(new Voltage("Voltage #7", 6, true));

                   v.Add(new Voltage("Voltage #8", 7, true));

                   v.Add(new Voltage("VBat", 8));

                   for (int i = 0; i < superIO.Temperatures.Length; i++)

                     t.Add(new Temperature("Temperature #" + (i + 1), i));

                   for (int i = 0; i < superIO.Fans.Length; i++)

                     f.Add(new Fan("Fan #" + (i + 1), i));

                   break;

               }

               break;

             case Manufacturer.DFI:

               switch (model) {

                 case Model.LP_BI_P45_T2RS_Elite:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("FSB VTT", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

                   v.Add(new Voltage("NB Core", 5));

                   v.Add(new Voltage("VDIMM", 6));

                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("CPU", 0));

                   t.Add(new Temperature("System", 1));

                   t.Add(new Temperature("Chipset", 2));

                   f.Add(new Fan("Fan #1", 0));

                   f.Add(new Fan("Fan #2", 1));

                   f.Add(new Fan("Fan #3", 2));

                   break;

                 case Model.LP_DK_P55_T3eH9:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("VTT", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

                   v.Add(new Voltage("CPU PLL", 5));

                   v.Add(new Voltage("DRAM", 6));

                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("Chipset", 0));

                   t.Add(new Temperature("CPU PWM", 1));

                   t.Add(new Temperature("CPU", 2));

                   f.Add(new Fan("Fan #1", 0));

                   f.Add(new Fan("Fan #2", 1));

                   f.Add(new Fan("Fan #3", 2));

                   break;

                 default:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("VTT", 1, true));

                   v.Add(new Voltage("+3.3V", 2, true));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

                   v.Add(new Voltage("Voltage #6", 5, true));

                   v.Add(new Voltage("DRAM", 6, true));

                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

                   v.Add(new Voltage("VBat", 8));

                   for (int i = 0; i < superIO.Temperatures.Length; i++)

                     t.Add(new Temperature("Temperature #" + (i + 1), i));

                   for (int i = 0; i < superIO.Fans.Length; i++)

                     f.Add(new Fan("Fan #" + (i + 1), i));

                   break;

               }

               break;

             case Manufacturer.Gigabyte:

               switch (model) {

                 case Model._965P_S3:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan", 1));

                   break;

                 case Model.EP45_DS3R:

                 case Model.EP45_UD3R: 

                 case Model.X38_DS5:    

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan #2", 1));

                   f.Add(new Fan("Power Fan", 2));

                   f.Add(new Fan("System Fan #1", 3));

                   break;

                 case Model.EX58_EXTREME:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   t.Add(new Temperature("Northbridge", 2));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan #2", 1));

                   f.Add(new Fan("Power Fan", 2));

                   f.Add(new Fan("System Fan #1", 3));

                   break;

                 case Model.P35_DS3:

                 case Model.P35_DS3L:                

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan #1", 1));

                   f.Add(new Fan("System Fan #2", 2));

                   f.Add(new Fan("Power Fan", 3));

                   break;

                 case Model.P55_UD4:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 2));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan #2", 1));

                   f.Add(new Fan("Power Fan", 2));

                   f.Add(new Fan("System Fan #1", 3));

                   break;

                 case Model.GA_MA785GMT_UD2H:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan", 1));

                   f.Add(new Fan("NB Fan", 2));

                   break;

                 case Model.X58A_UD3R:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1));

                   v.Add(new Voltage("+3.3V", 2));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

                   v.Add(new Voltage("VBat", 8));

                   t.Add(new Temperature("System", 0));

                   t.Add(new Temperature("CPU", 1));

                   t.Add(new Temperature("Northbridge", 2));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("System Fan #2", 1));

                   f.Add(new Fan("Power Fan", 2));

                   f.Add(new Fan("System Fan #1", 3));

                   break;

                 default:

                   v.Add(new Voltage("CPU VCore", 0));

                   v.Add(new Voltage("DRAM", 1, true));

                   v.Add(new Voltage("+3.3V", 2, true));

                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

                   v.Add(new Voltage("Voltage #5", 4, true));

                   v.Add(new Voltage("Voltage #6", 5, true));

                   v.Add(new Voltage("Voltage #7", 6, true));

                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));

                   v.Add(new Voltage("VBat", 8));

                   for (int i = 0; i < superIO.Temperatures.Length; i++)

                     t.Add(new Temperature("Temperature #" + (i + 1), i));

                   for (int i = 0; i < superIO.Fans.Length; i++)

                     f.Add(new Fan("Fan #" + (i + 1), i));

                   break;

               }

               break;

             default:

               v.Add(new Voltage("CPU VCore", 0));

               v.Add(new Voltage("Voltage #2", 1, true));

               v.Add(new Voltage("Voltage #3", 2, true));

               v.Add(new Voltage("Voltage #4", 3, true));

               v.Add(new Voltage("Voltage #5", 4, true));

               v.Add(new Voltage("Voltage #6", 5, true));

               v.Add(new Voltage("Voltage #7", 6, true));

               v.Add(new Voltage("Voltage #8", 7, true));

               v.Add(new Voltage("VBat", 8));

               for (int i = 0; i < superIO.Temperatures.Length; i++)

                 t.Add(new Temperature("Temperature #" + (i + 1), i));

               for (int i = 0; i < superIO.Fans.Length; i++)

                 f.Add(new Fan("Fan #" + (i + 1), i));

               break;

           }

           break;

         case Chip.F71858:

           v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

           v.Add(new Voltage("VSB3V", 1, 150, 150, 0));

           v.Add(new Voltage("Battery", 2, 150, 150, 0));

           for (int i = 0; i < superIO.Temperatures.Length; i++)

             t.Add(new Temperature("Temperature #" + (i + 1), i));

           for (int i = 0; i < superIO.Fans.Length; i++)

             f.Add(new Fan("Fan #" + (i + 1), i));

           break;

         case Chip.F71862: 

         case Chip.F71869: 

         case Chip.F71882:

         case Chip.F71889ED: 

         case Chip.F71889F:

           switch (manufacturer) {

             case Manufacturer.EVGA:

               switch (model) {

                 case Model.X58_SLI_Classified:

                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

                   v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));

                   v.Add(new Voltage("DIMM", 2, 47, 100, 0));

                   v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));

                   v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));

                   v.Add(new Voltage("+5V", 5, 51, 12, 0));

                   v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));

                   v.Add(new Voltage("3VSB", 7, 150, 150, 0));

                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

                   t.Add(new Temperature("CPU", 0));

                   t.Add(new Temperature("VREG", 1));

                   t.Add(new Temperature("System", 2));

                   f.Add(new Fan("CPU Fan", 0));

                   f.Add(new Fan("Power Fan", 1));

                   f.Add(new Fan("Chassis Fan", 2));

                   break;

                 default:

                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

                   v.Add(new Voltage("CPU VCore", 1));

                   v.Add(new Voltage("Voltage #3", 2, true));

                   v.Add(new Voltage("Voltage #4", 3, true));

                   v.Add(new Voltage("Voltage #5", 4, true));

                   v.Add(new Voltage("Voltage #6", 5, true));

                   v.Add(new Voltage("Voltage #7", 6, true));

                   v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

                   for (int i = 0; i < superIO.Temperatures.Length; i++)

                     t.Add(new Temperature("Temperature #" + (i + 1), i));

                   for (int i = 0; i < superIO.Fans.Length; i++)

                     f.Add(new Fan("Fan #" + (i + 1), i));

                   break;

               }

               break;

             default:

               v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

               v.Add(new Voltage("CPU VCore", 1));

               v.Add(new Voltage("Voltage #3", 2, true));

               v.Add(new Voltage("Voltage #4", 3, true));

               v.Add(new Voltage("Voltage #5", 4, true));

               v.Add(new Voltage("Voltage #6", 5, true));

               v.Add(new Voltage("Voltage #7", 6, true));

               v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

               v.Add(new Voltage("VBat", 8, 150, 150, 0));

               for (int i = 0; i < superIO.Temperatures.Length; i++)

                 t.Add(new Temperature("Temperature #" + (i + 1), i));

               for (int i = 0; i < superIO.Fans.Length; i++)

                 f.Add(new Fan("Fan #" + (i + 1), i));

               break;

           }

           break;

         case Chip.W83627EHF:          

           v.Add(new Voltage("CPU VCore", 0));

           v.Add(new Voltage("Voltage #2", 1, true));

           v.Add(new Voltage("AVCC", 2, 34, 34, 0));

           v.Add(new Voltage("3VCC", 3, 34, 34, 0));

           v.Add(new Voltage("Voltage #5", 4, true));

           v.Add(new Voltage("Voltage #6", 5, true));

           v.Add(new Voltage("Voltage #7", 6, true));

           v.Add(new Voltage("3VSB", 7, 34, 34, 0));

           v.Add(new Voltage("VBAT", 8, 34, 34, 0));

           v.Add(new Voltage("Voltage #10", 9, true));

           t.Add(new Temperature("CPU", 0));

           t.Add(new Temperature("Auxiliary", 1));

           t.Add(new Temperature("System", 2));

           f.Add(new Fan("System", 0));

           f.Add(new Fan("CPU", 1));

           f.Add(new Fan("Auxiliary", 2));

           f.Add(new Fan("CPU #2", 3));

           f.Add(new Fan("Auxiliary #2", 4));

           break;

         case Chip.W83627DHG: 

         case Chip.W83627DHGP:                      

         case Chip.W83667HG:

         case Chip.W83667HGB:

           v.Add(new Voltage("CPU VCore", 0));

           v.Add(new Voltage("Voltage #2", 1, true));

           v.Add(new Voltage("AVCC", 2, 34, 34, 0));

           v.Add(new Voltage("3VCC", 3, 34, 34, 0));

           v.Add(new Voltage("Voltage #5", 4, true));

           v.Add(new Voltage("Voltage #6", 5, true));

           v.Add(new Voltage("Voltage #7", 6, true));

           v.Add(new Voltage("3VSB", 7, 34, 34, 0));

           v.Add(new Voltage("VBAT", 8, 34, 34, 0));

           t.Add(new Temperature("CPU", 0));

           t.Add(new Temperature("Auxiliary", 1));

           t.Add(new Temperature("System", 2));

           f.Add(new Fan("System", 0));

           f.Add(new Fan("CPU", 1));

           f.Add(new Fan("Auxiliary", 2));

           f.Add(new Fan("CPU #2", 3));

           f.Add(new Fan("Auxiliary #2", 4));            

           break;

         case Chip.W83627HF: 

         case Chip.W83627THF: 

         case Chip.W83687THF:

           v.Add(new Voltage("CPU VCore", 0));

           v.Add(new Voltage("Voltage #2", 1, true));

           v.Add(new Voltage("Voltage #3", 2, true));

           v.Add(new Voltage("AVCC", 3, 34, 51, 0));

           v.Add(new Voltage("Voltage #5", 4, true));

           v.Add(new Voltage("5VSB", 5, 34, 51, 0));

           v.Add(new Voltage("VBAT", 6));

           t.Add(new Temperature("CPU", 0));

           t.Add(new Temperature("Auxiliary", 1));

           t.Add(new Temperature("System", 2));

           f.Add(new Fan("System", 0));

           f.Add(new Fan("CPU", 1));

           f.Add(new Fan("Auxiliary", 2));

           break;

         default:

           for (int i = 0; i < superIO.Voltages.Length; i++)

             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

           for (int i = 0; i < superIO.Temperatures.Length; i++)

             t.Add(new Temperature("Temperature #" + (i + 1), i));

           for (int i = 0; i < superIO.Fans.Length; i++)

             f.Add(new Fan("Fan #" + (i + 1), i));

           break;

       }

       string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

       foreach (Voltage voltage in v) 

         if (voltage.Index < superIO.Voltages.Length) {

           Sensor sensor = new Sensor(voltage.Name, voltage.Index, 

             voltage.Hidden, SensorType.Voltage, this, 

             new ParameterDescription[] {

             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" + 

               formula, voltage.Ri),

             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" + 

               formula, voltage.Rf),

             new ParameterDescription("Vf [V]", "Reference voltage.\n" + 

               formula, voltage.Vf)

             });

           voltages.Add(sensor);

       }

       foreach (Temperature temperature in t) 

         if (temperature.Index < superIO.Temperatures.Length) {

         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

           SensorType.Temperature, this, new ParameterDescription[] {

           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

         });

         temperatures.Add(sensor);

       }

       foreach (Fan fan in f)

         if (fan.Index < superIO.Fans.Length) {

           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

             this, null);

           fans.Add(sensor);

         }

     }

     public override Identifier Identifier {

       get { return new Identifier("lpc", superIO.Chip.ToString().ToLower()); }

     }

     public override Image Icon {

       get { return icon; }

     }

     public override string Name {

       get { return name; }

     }

     public override string GetReport() {

       return superIO.GetReport();

     }

     public override void Update() {

       superIO.Update();

       foreach (Sensor sensor in voltages) {

         float? value = superIO.Voltages[sensor.Index];

         if (value.HasValue) {

           sensor.Value = value + (value - sensor.Parameters[2].Value) *

             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

           ActivateSensor(sensor);

         }

       }

       foreach (Sensor sensor in temperatures) {

         float? value = superIO.Temperatures[sensor.Index];

         if (value.HasValue) {

           sensor.Value = value + sensor.Parameters[0].Value;

           ActivateSensor(sensor);

         }

       }

       foreach (Sensor sensor in fans) {

         float? value = superIO.Fans[sensor.Index];

         if (value.HasValue) {

           sensor.Value = value;

           if (value.Value > 0)

             ActivateSensor(sensor);

         }

       }

     }

     private class Voltage {

       public readonly string Name;

       public readonly int Index;

       public readonly float Ri;

       public readonly float Rf;

       public readonly float Vf;

       public readonly bool Hidden;

       public Voltage(string name, int index) :

         this(name, index, 0, 1, 0, false) { }

       public Voltage(string name, int index, bool hidden) :

         this(name, index, 0, 1, 0, hidden) { }

       public Voltage(string name, int index, float ri, float rf, float vf) :

         this(name, index, ri, rf, vf, false) { }

       public Voltage(string name, int index, float ri, float rf, float vf,

         bool hidden) {

         this.Name = name;

         this.Index = index;

         this.Ri = ri;

         this.Rf = rf;

         this.Vf = vf;

         this.Hidden = hidden;

       }

     }

     private class Temperature {

       public readonly string Name;

       public readonly int Index;

       public Temperature(string name, int index) {

         this.Name = name;

         this.Index = index;

       }

     }

     private class Fan {

       public readonly string Name;

       public readonly int Index;

       public Fan(string name, int index) {

         this.Name = name;

         this.Index = index;

       }

     }

   }

 }