OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@35788ddd1825

     1 /*

     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1

     5   The contents of this file are subject to the Mozilla Public License Version

     6   1.1 (the "License"); you may not use this file except in compliance with

     7   the License. You may obtain a copy of the License at

     9   http://www.mozilla.org/MPL/

    11   Software distributed under the License is distributed on an "AS IS" basis,

    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

    13   for the specific language governing rights and limitations under the License.

    15   The Original Code is the Open Hardware Monitor code.

    17   The Initial Developer of the Original Code is

    18   Michael Möller <m.moeller@gmx.ch>.

    19   Portions created by the Initial Developer are Copyright (C) 2009-2011

    20   the Initial Developer. All Rights Reserved.

    22   Contributor(s):

    24   Alternatively, the contents of this file may be used under the terms of

    25   either the GNU General Public License Version 2 or later (the "GPL"), or

    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

    27   in which case the provisions of the GPL or the LGPL are applicable instead

    28   of those above. If you wish to allow use of your version of this file only

    29   under the terms of either the GPL or the LGPL, and not to allow others to

    30   use your version of this file under the terms of the MPL, indicate your

    31   decision by deleting the provisions above and replace them with the notice

    32   and other provisions required by the GPL or the LGPL. If you do not delete

    33   the provisions above, a recipient may use your version of this file under

    34   the terms of any one of the MPL, the GPL or the LGPL.

    36 */

    38 using System;

    39 using System.Collections.Generic;

    40 using System.Globalization;

    41 using System.Threading;

    42 using OpenHardwareMonitor.Hardware.LPC;

    44 namespace OpenHardwareMonitor.Hardware.Mainboard {

    45   internal class SuperIOHardware : Hardware {

    47     private readonly Mainboard mainboard;

    48     private readonly ISuperIO superIO;

    50     private readonly List<Sensor> voltages = new List<Sensor>();

    51     private readonly List<Sensor> temperatures = new List<Sensor>();

    52     private readonly List<Sensor> fans = new List<Sensor>();

    54     private delegate float? ReadValueDelegate(int index);

    55     private delegate void UpdateDelegate();

    57     // delegates for mainboard specific sensor reading code

    58     private readonly ReadValueDelegate readVoltage;

    59     private readonly ReadValueDelegate readTemperature;

    60     private readonly ReadValueDelegate readFan;

    62     // delegate for post update mainboard specific code

    63     private readonly UpdateDelegate postUpdate;

    65     // mainboard specific mutex

    66     private readonly Mutex mutex;

    68     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,

    69       Manufacturer manufacturer, Model model, ISettings settings)

    70       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",

    71         superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),

    72         settings)

    73     {

    74       this.mainboard = mainboard;

    75       this.superIO = superIO;

    77       this.readVoltage = (index) => superIO.Voltages[index];

    78       this.readTemperature = (index) => superIO.Temperatures[index];

    79       this.readFan = (index) => superIO.Fans[index];

    81       this.postUpdate = () => { };

    83       List<Voltage> v = new List<Voltage>();

    84       List<Temperature> t = new List<Temperature>();

    85       List<Fan> f = new List<Fan>();

    87       switch (superIO.Chip) {

    88         case Chip.IT8712F:

    89         case Chip.IT8716F:

    90         case Chip.IT8718F:

    91         case Chip.IT8720F:

    92         case Chip.IT8726F:

    93           switch (manufacturer) {

    94             case Manufacturer.ASUS:

    95               switch (model) {

    96                 case Model.Crosshair_III_Formula: // IT8720F

    97                   v.Add(new Voltage("VBat", 8));

    98                   t.Add(new Temperature("CPU", 0));

    99                   for (int i = 0; i < superIO.Fans.Length; i++)

   100                     f.Add(new Fan("Fan #" + (i + 1), i));

   101                   break;

   102                 case Model.M2N_SLI_DELUXE:

   103                   v.Add(new Voltage("CPU VCore", 0));

   104                   v.Add(new Voltage("+3.3V", 1));

   105                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   106                   v.Add(new Voltage("+12V", 4, 30, 10));

   107                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   108                   v.Add(new Voltage("VBat", 8));

   109                   t.Add(new Temperature("CPU", 0));

   110                   t.Add(new Temperature("Motherboard", 1));

   111                   f.Add(new Fan("CPU Fan", 0));

   112                   f.Add(new Fan("Chassis Fan #1", 1));

   113                   f.Add(new Fan("Power Fan", 2));

   114                   break;

   115                 case Model.M4A79XTD_EVO: // IT8720F

   116                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   117                   v.Add(new Voltage("VBat", 8));

   118                   t.Add(new Temperature("CPU", 0));

   119                   t.Add(new Temperature("Motherboard", 1));

   120                   f.Add(new Fan("CPU Fan", 0));

   121                   f.Add(new Fan("Chassis Fan #1", 1));

   122                   f.Add(new Fan("Chassis Fan #2", 2));

   123                   break;

   124                 default:

   125                   v.Add(new Voltage("CPU VCore", 0));

   126                   v.Add(new Voltage("Voltage #2", 1, true));

   127                   v.Add(new Voltage("Voltage #3", 2, true));

   128                   v.Add(new Voltage("Voltage #4", 3, true));

   129                   v.Add(new Voltage("Voltage #5", 4, true));

   130                   v.Add(new Voltage("Voltage #6", 5, true));

   131                   v.Add(new Voltage("Voltage #7", 6, true));

   132                   v.Add(new Voltage("Voltage #8", 7, true));

   133                   v.Add(new Voltage("VBat", 8));

   134                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   135                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   136                   for (int i = 0; i < superIO.Fans.Length; i++)

   137                     f.Add(new Fan("Fan #" + (i + 1), i));

   138                   break;

   139               }

   140               break;

   142             case Manufacturer.ASRock:

   143               switch (model) {

   144                 case Model.P55_Deluxe: // IT8720F

   146                   v.Add(new Voltage("CPU VCore", 0));

   147                   v.Add(new Voltage("+3.3V", 2));

   148                   v.Add(new Voltage("+12V", 4, 30, 10));

   149                   v.Add(new Voltage("+5V", 5, 6.8f, 10));

   150                   v.Add(new Voltage("VBat", 8));

   151                   t.Add(new Temperature("CPU", 0));

   152                   t.Add(new Temperature("Motherboard", 1));

   153                   f.Add(new Fan("CPU Fan", 0));

   154                   f.Add(new Fan("Chassis Fan #1", 1));

   156                   // this mutex is also used by the official ASRock tool

   157                   mutex = new Mutex(false, "ASRockOCMark");

   159                   bool exclusiveAccess = false;

   160                   try {

   161                     exclusiveAccess = mutex.WaitOne(10, false);

   162                   } catch (AbandonedMutexException) { }

   163                     catch (InvalidOperationException) { }

   165                   // only read additional fans if we get exclusive access

   166                   if (exclusiveAccess) {

   168                     f.Add(new Fan("Chassis Fan #2", 2));

   169                     f.Add(new Fan("Chassis Fan #3", 3));

   170                     f.Add(new Fan("Power Fan", 4));

   172                     readFan = (index) => {

   173                       if (index < 2) {

   174                         return superIO.Fans[index];

   175                       } else {

   176                         // get GPIO 80-87

   177                         byte? gpio = superIO.ReadGPIO(7);

   178                         if (!gpio.HasValue)

   179                           return null;

   181                         // read the last 3 fans based on GPIO 83-85

   182                         int[] masks = { 0x05, 0x03, 0x06 };

   183                         return (((gpio.Value >> 3) & 0x07) ==

   184                           masks[index - 2]) ? superIO.Fans[2] : null;

   185                       }

   186                     };

   188                     int fanIndex = 0;

   189                     postUpdate = () => {

   190                       // get GPIO 80-87

   191                       byte? gpio = superIO.ReadGPIO(7);

   192                       if (!gpio.HasValue)

   193                         return;

   195                       // prepare the GPIO 83-85 for the next update

   196                       int[] masks = { 0x05, 0x03, 0x06 };

   197                       superIO.WriteGPIO(7,

   198                         (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));

   199                       fanIndex = (fanIndex + 1) % 3;

   200                     };

   201                   }

   203                   break;

   204                 default:

   205                   v.Add(new Voltage("CPU VCore", 0));

   206                   v.Add(new Voltage("Voltage #2", 1, true));

   207                   v.Add(new Voltage("Voltage #3", 2, true));

   208                   v.Add(new Voltage("Voltage #4", 3, true));

   209                   v.Add(new Voltage("Voltage #5", 4, true));

   210                   v.Add(new Voltage("Voltage #6", 5, true));

   211                   v.Add(new Voltage("Voltage #7", 6, true));

   212                   v.Add(new Voltage("Voltage #8", 7, true));

   213                   v.Add(new Voltage("VBat", 8));

   214                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   215                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   216                   for (int i = 0; i < superIO.Fans.Length; i++)

   217                     f.Add(new Fan("Fan #" + (i + 1), i));

   218                   break;

   219               };

   220               break;

   222             case Manufacturer.DFI:

   223               switch (model) {

   224                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   225                   v.Add(new Voltage("CPU VCore", 0));

   226                   v.Add(new Voltage("FSB VTT", 1));

   227                   v.Add(new Voltage("+3.3V", 2));

   228                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   229                   v.Add(new Voltage("+12V", 4, 30, 10));

   230                   v.Add(new Voltage("NB Core", 5));

   231                   v.Add(new Voltage("VDIMM", 6));

   232                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   233                   v.Add(new Voltage("VBat", 8));

   234                   t.Add(new Temperature("CPU", 0));

   235                   t.Add(new Temperature("System", 1));

   236                   t.Add(new Temperature("Chipset", 2));

   237                   f.Add(new Fan("Fan #1", 0));

   238                   f.Add(new Fan("Fan #2", 1));

   239                   f.Add(new Fan("Fan #3", 2));

   240                   break;

   241                 case Model.LP_DK_P55_T3eH9: // IT8720F

   242                   v.Add(new Voltage("CPU VCore", 0));

   243                   v.Add(new Voltage("VTT", 1));

   244                   v.Add(new Voltage("+3.3V", 2));

   245                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   246                   v.Add(new Voltage("+12V", 4, 30, 10));

   247                   v.Add(new Voltage("CPU PLL", 5));

   248                   v.Add(new Voltage("DRAM", 6));

   249                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   250                   v.Add(new Voltage("VBat", 8));

   251                   t.Add(new Temperature("Chipset", 0));

   252                   t.Add(new Temperature("CPU PWM", 1));

   253                   t.Add(new Temperature("CPU", 2));

   254                   f.Add(new Fan("Fan #1", 0));

   255                   f.Add(new Fan("Fan #2", 1));

   256                   f.Add(new Fan("Fan #3", 2));

   257                   break;

   258                 default:

   259                   v.Add(new Voltage("CPU VCore", 0));

   260                   v.Add(new Voltage("VTT", 1, true));

   261                   v.Add(new Voltage("+3.3V", 2, true));

   262                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   263                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   264                   v.Add(new Voltage("Voltage #6", 5, true));

   265                   v.Add(new Voltage("DRAM", 6, true));

   266                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   267                   v.Add(new Voltage("VBat", 8));

   268                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   269                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   270                   for (int i = 0; i < superIO.Fans.Length; i++)

   271                     f.Add(new Fan("Fan #" + (i + 1), i));

   272                   break;

   273               }

   274               break;

   276             case Manufacturer.Gigabyte:

   277               switch (model) {

   278                 case Model._965P_S3: // IT8718F

   279                   v.Add(new Voltage("CPU VCore", 0));

   280                   v.Add(new Voltage("DRAM", 1));

   281                   v.Add(new Voltage("+3.3V", 2));

   282                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   283                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   284                   v.Add(new Voltage("VBat", 8));

   285                   t.Add(new Temperature("System", 0));

   286                   t.Add(new Temperature("CPU", 1));

   287                   f.Add(new Fan("CPU Fan", 0));

   288                   f.Add(new Fan("System Fan", 1));

   289                   break;

   290                 case Model.EP45_DS3R: // IT8718F

   291                 case Model.EP45_UD3R:

   292                 case Model.X38_DS5:

   293                   v.Add(new Voltage("CPU VCore", 0));

   294                   v.Add(new Voltage("DRAM", 1));

   295                   v.Add(new Voltage("+3.3V", 2));

   296                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   297                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   298                   v.Add(new Voltage("VBat", 8));

   299                   t.Add(new Temperature("System", 0));

   300                   t.Add(new Temperature("CPU", 1));

   301                   f.Add(new Fan("CPU Fan", 0));

   302                   f.Add(new Fan("System Fan #2", 1));

   303                   f.Add(new Fan("Power Fan", 2));

   304                   f.Add(new Fan("System Fan #1", 3));

   305                   break;

   306                 case Model.EX58_EXTREME: // IT8720F

   307                   v.Add(new Voltage("CPU VCore", 0));

   308                   v.Add(new Voltage("DRAM", 1));

   309                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   310                   v.Add(new Voltage("VBat", 8));

   311                   t.Add(new Temperature("System", 0));

   312                   t.Add(new Temperature("CPU", 1));

   313                   t.Add(new Temperature("Northbridge", 2));

   314                   f.Add(new Fan("CPU Fan", 0));

   315                   f.Add(new Fan("System Fan #2", 1));

   316                   f.Add(new Fan("Power Fan", 2));

   317                   f.Add(new Fan("System Fan #1", 3));

   318                   break;

   319                 case Model.P35_DS3: // IT8718F

   320                 case Model.P35_DS3L: // IT8718F

   321                   v.Add(new Voltage("CPU VCore", 0));

   322                   v.Add(new Voltage("DRAM", 1));

   323                   v.Add(new Voltage("+3.3V", 2));

   324                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   325                   v.Add(new Voltage("+12V", 7, 27, 9.1f));

   326                   v.Add(new Voltage("VBat", 8));

   327                   t.Add(new Temperature("System", 0));

   328                   t.Add(new Temperature("CPU", 1));

   329                   f.Add(new Fan("CPU Fan", 0));

   330                   f.Add(new Fan("System Fan #1", 1));

   331                   f.Add(new Fan("System Fan #2", 2));

   332                   f.Add(new Fan("Power Fan", 3));

   333                   break;

   334                 case Model.P55_UD4: // IT8720F

   335                 case Model.P55M_UD4: // IT8720F

   336                   v.Add(new Voltage("CPU VCore", 0));

   337                   v.Add(new Voltage("DRAM", 1));

   338                   v.Add(new Voltage("+3.3V", 2));

   339                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   340                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   341                   v.Add(new Voltage("VBat", 8));

   342                   t.Add(new Temperature("System", 0));

   343                   t.Add(new Temperature("CPU", 2));

   344                   f.Add(new Fan("CPU Fan", 0));

   345                   f.Add(new Fan("System Fan #2", 1));

   346                   f.Add(new Fan("Power Fan", 2));

   347                   f.Add(new Fan("System Fan #1", 3));

   348                   break;

   349                 case Model.GA_MA770T_UD3: // IT8720F

   350                   v.Add(new Voltage("CPU VCore", 0));

   351                   v.Add(new Voltage("DRAM", 1));

   352                   v.Add(new Voltage("+3.3V", 2));

   353                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   354                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   355                   v.Add(new Voltage("VBat", 8));

   356                   t.Add(new Temperature("System", 0));

   357                   t.Add(new Temperature("CPU", 1));

   358                   f.Add(new Fan("CPU Fan", 0));

   359                   f.Add(new Fan("System Fan #1", 1));

   360                   f.Add(new Fan("System Fan #2", 2));

   361                   f.Add(new Fan("Power Fan", 3));

   362                   break;

   363                 case Model.GA_MA785GMT_UD2H: // IT8718F

   364                   v.Add(new Voltage("CPU VCore", 0));

   365                   v.Add(new Voltage("DRAM", 1));

   366                   v.Add(new Voltage("+3.3V", 2));

   367                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   368                   v.Add(new Voltage("+12V", 4, 27, 9.1f));

   369                   v.Add(new Voltage("VBat", 8));

   370                   t.Add(new Temperature("System", 0));

   371                   t.Add(new Temperature("CPU", 1));

   372                   f.Add(new Fan("CPU Fan", 0));

   373                   f.Add(new Fan("System Fan", 1));

   374                   f.Add(new Fan("NB Fan", 2));

   375                   break;

   376                 case Model.X58A_UD3R: // IT8720F

   377                   v.Add(new Voltage("CPU VCore", 0));

   378                   v.Add(new Voltage("DRAM", 1));

   379                   v.Add(new Voltage("+3.3V", 2));

   380                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   381                   v.Add(new Voltage("+12V", 5, 27, 9.1f));

   382                   v.Add(new Voltage("VBat", 8));

   383                   t.Add(new Temperature("System", 0));

   384                   t.Add(new Temperature("CPU", 1));

   385                   t.Add(new Temperature("Northbridge", 2));

   386                   f.Add(new Fan("CPU Fan", 0));

   387                   f.Add(new Fan("System Fan #2", 1));

   388                   f.Add(new Fan("Power Fan", 2));

   389                   f.Add(new Fan("System Fan #1", 3));

   390                   break;

   391                 default:

   392                   v.Add(new Voltage("CPU VCore", 0));

   393                   v.Add(new Voltage("DRAM", 1, true));

   394                   v.Add(new Voltage("+3.3V", 2, true));

   395                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   396                   v.Add(new Voltage("Voltage #5", 4, true));

   397                   v.Add(new Voltage("Voltage #6", 5, true));

   398                   v.Add(new Voltage("Voltage #7", 6, true));

   399                   v.Add(new Voltage("Voltage #8", 7, true));

   400                   v.Add(new Voltage("VBat", 8));

   401                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   402                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   403                   for (int i = 0; i < superIO.Fans.Length; i++)

   404                     f.Add(new Fan("Fan #" + (i + 1), i));

   405                   break;

   406               }

   407               break;

   409             default:

   410               v.Add(new Voltage("CPU VCore", 0));

   411               v.Add(new Voltage("Voltage #2", 1, true));

   412               v.Add(new Voltage("Voltage #3", 2, true));

   413               v.Add(new Voltage("Voltage #4", 3, true));

   414               v.Add(new Voltage("Voltage #5", 4, true));

   415               v.Add(new Voltage("Voltage #6", 5, true));

   416               v.Add(new Voltage("Voltage #7", 6, true));

   417               v.Add(new Voltage("Voltage #8", 7, true));

   418               v.Add(new Voltage("VBat", 8));

   419               for (int i = 0; i < superIO.Temperatures.Length; i++)

   420                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   421               for (int i = 0; i < superIO.Fans.Length; i++)

   422                 f.Add(new Fan("Fan #" + (i + 1), i));

   423               break;

   424           }

   425           break;

   427         case Chip.IT8721F:

   428           switch (manufacturer) {

   429             case Manufacturer.ECS:

   430               switch (model) {

   431                 case Model.A890GXM_A: // IT8721F

   432                   v.Add(new Voltage("CPU VCore", 0));

   433                   v.Add(new Voltage("VDIMM", 1));

   434                   v.Add(new Voltage("NB Voltage", 2));

   435                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10));

   436                   // v.Add(new Voltage("VDIMM", 6, true));

   437                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   438                   v.Add(new Voltage("VBat", 8, 10, 10));

   439                   t.Add(new Temperature("CPU", 0));

   440                   t.Add(new Temperature("System", 1));

   441                   t.Add(new Temperature("Northbridge", 2));

   442                   f.Add(new Fan("CPU Fan", 0));

   443                   f.Add(new Fan("System Fan", 1));

   444                   f.Add(new Fan("Power Fan", 2));

   445                   break;

   446                 default:

   447                   v.Add(new Voltage("Voltage #1", 0, true));

   448                   v.Add(new Voltage("Voltage #2", 1, true));

   449                   v.Add(new Voltage("Voltage #3", 2, true));

   450                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   451                   v.Add(new Voltage("Voltage #5", 4, true));

   452                   v.Add(new Voltage("Voltage #6", 5, true));

   453                   v.Add(new Voltage("Voltage #7", 6, true));

   454                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   455                   v.Add(new Voltage("VBat", 8, 10, 10));

   456                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   457                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   458                   for (int i = 0; i < superIO.Fans.Length; i++)

   459                     f.Add(new Fan("Fan #" + (i + 1), i));

   460                   break;

   461               }

   462               break;

   463             default:

   464               v.Add(new Voltage("Voltage #1", 0, true));

   465               v.Add(new Voltage("Voltage #2", 1, true));

   466               v.Add(new Voltage("Voltage #3", 2, true));

   467               v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   468               v.Add(new Voltage("Voltage #5", 4, true));

   469               v.Add(new Voltage("Voltage #6", 5, true));

   470               v.Add(new Voltage("Voltage #7", 6, true));

   471               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   472               v.Add(new Voltage("VBat", 8, 10, 10));

   473               for (int i = 0; i < superIO.Temperatures.Length; i++)

   474                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   475               for (int i = 0; i < superIO.Fans.Length; i++)

   476                 f.Add(new Fan("Fan #" + (i + 1), i));

   477               break;

   478           }

   479           break;

   481         case Chip.F71858:

   482           v.Add(new Voltage("VCC3V", 0, 150, 150));

   483           v.Add(new Voltage("VSB3V", 1, 150, 150));

   484           v.Add(new Voltage("Battery", 2, 150, 150));

   485           for (int i = 0; i < superIO.Temperatures.Length; i++)

   486             t.Add(new Temperature("Temperature #" + (i + 1), i));

   487           for (int i = 0; i < superIO.Fans.Length; i++)

   488             f.Add(new Fan("Fan #" + (i + 1), i));

   489           break;

   490         case Chip.F71862:

   491         case Chip.F71869:

   492         case Chip.F71882:

   493         case Chip.F71889ED:

   494         case Chip.F71889F:

   495           switch (manufacturer) {

   496             case Manufacturer.EVGA:

   497               switch (model) {

   498                 case Model.X58_SLI_Classified: // F71882

   499                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   500                   v.Add(new Voltage("CPU VCore", 1, 47, 100));

   501                   v.Add(new Voltage("DIMM", 2, 47, 100));

   502                   v.Add(new Voltage("CPU VTT", 3, 24, 100));

   503                   v.Add(new Voltage("IOH Vcore", 4, 24, 100));

   504                   v.Add(new Voltage("+5V", 5, 51, 12));

   505                   v.Add(new Voltage("+12V", 6, 56, 6.8f));

   506                   v.Add(new Voltage("3VSB", 7, 150, 150));

   507                   v.Add(new Voltage("VBat", 8, 150, 150));

   508                   t.Add(new Temperature("CPU", 0));

   509                   t.Add(new Temperature("VREG", 1));

   510                   t.Add(new Temperature("System", 2));

   511                   f.Add(new Fan("CPU Fan", 0));

   512                   f.Add(new Fan("Power Fan", 1));

   513                   f.Add(new Fan("Chassis Fan", 2));

   514                   break;

   515                 default:

   516                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   517                   v.Add(new Voltage("CPU VCore", 1));

   518                   v.Add(new Voltage("Voltage #3", 2, true));

   519                   v.Add(new Voltage("Voltage #4", 3, true));

   520                   v.Add(new Voltage("Voltage #5", 4, true));

   521                   v.Add(new Voltage("Voltage #6", 5, true));

   522                   v.Add(new Voltage("Voltage #7", 6, true));

   523                   v.Add(new Voltage("VSB3V", 7, 150, 150));

   524                   v.Add(new Voltage("VBat", 8, 150, 150));

   525                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   526                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   527                   for (int i = 0; i < superIO.Fans.Length; i++)

   528                     f.Add(new Fan("Fan #" + (i + 1), i));

   529                   break;

   530               }

   531               break;

   532             default:

   533               v.Add(new Voltage("VCC3V", 0, 150, 150));

   534               v.Add(new Voltage("CPU VCore", 1));

   535               v.Add(new Voltage("Voltage #3", 2, true));

   536               v.Add(new Voltage("Voltage #4", 3, true));

   537               v.Add(new Voltage("Voltage #5", 4, true));

   538               v.Add(new Voltage("Voltage #6", 5, true));

   539               v.Add(new Voltage("Voltage #7", 6, true));

   540               v.Add(new Voltage("VSB3V", 7, 150, 150));

   541               v.Add(new Voltage("VBat", 8, 150, 150));

   542               for (int i = 0; i < superIO.Temperatures.Length; i++)

   543                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   544               for (int i = 0; i < superIO.Fans.Length; i++)

   545                 f.Add(new Fan("Fan #" + (i + 1), i));

   546               break;

   547           }

   548           break;

   550         case Chip.W83627EHF:

   551           switch (manufacturer) {

   552             case Manufacturer.ASRock:

   553               switch (model) {

   554                 case Model.AOD790GX_128M: // W83627EHF

   555                   v.Add(new Voltage("CPU VCore", 0));

   556                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   557                   v.Add(new Voltage("+3.3V", 4, 10, 10));

   558                   v.Add(new Voltage("+5V", 5, 20, 10));

   559                   v.Add(new Voltage("+12V", 6, 28, 5));

   560                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   561                   v.Add(new Voltage("VBAT", 8, 34, 34));

   562                   t.Add(new Temperature("CPU", 0));

   563                   t.Add(new Temperature("Motherboard", 2));

   564                   f.Add(new Fan("CPU Fan", 0));

   565                   f.Add(new Fan("Chassis Fan", 1));

   566                   break;

   567                 default:

   568                   v.Add(new Voltage("CPU VCore", 0));

   569                   v.Add(new Voltage("Voltage #2", 1, true));

   570                   v.Add(new Voltage("AVCC", 2, 34, 34));

   571                   v.Add(new Voltage("3VCC", 3, 34, 34));

   572                   v.Add(new Voltage("Voltage #5", 4, true));

   573                   v.Add(new Voltage("Voltage #6", 5, true));

   574                   v.Add(new Voltage("Voltage #7", 6, true));

   575                   v.Add(new Voltage("3VSB", 7, 34, 34));

   576                   v.Add(new Voltage("VBAT", 8, 34, 34));

   577                   v.Add(new Voltage("Voltage #10", 9, true));

   578                   t.Add(new Temperature("CPU", 0));

   579                   t.Add(new Temperature("Auxiliary", 1));

   580                   t.Add(new Temperature("System", 2));

   581                   f.Add(new Fan("System Fan", 0));

   582                   f.Add(new Fan("CPU Fan", 1));

   583                   f.Add(new Fan("Auxiliary Fan", 2));

   584                   f.Add(new Fan("CPU Fan #2", 3));

   585                   f.Add(new Fan("Auxiliary Fan #2", 4));

   586                   break;

   587               } break;

   588             default:

   589               v.Add(new Voltage("CPU VCore", 0));

   590               v.Add(new Voltage("Voltage #2", 1, true));

   591               v.Add(new Voltage("AVCC", 2, 34, 34));

   592               v.Add(new Voltage("3VCC", 3, 34, 34));

   593               v.Add(new Voltage("Voltage #5", 4, true));

   594               v.Add(new Voltage("Voltage #6", 5, true));

   595               v.Add(new Voltage("Voltage #7", 6, true));

   596               v.Add(new Voltage("3VSB", 7, 34, 34));

   597               v.Add(new Voltage("VBAT", 8, 34, 34));

   598               v.Add(new Voltage("Voltage #10", 9, true));

   599               t.Add(new Temperature("CPU", 0));

   600               t.Add(new Temperature("Auxiliary", 1));

   601               t.Add(new Temperature("System", 2));

   602               f.Add(new Fan("System Fan", 0));

   603               f.Add(new Fan("CPU Fan", 1));

   604               f.Add(new Fan("Auxiliary Fan", 2));

   605               f.Add(new Fan("CPU Fan #2", 3));

   606               f.Add(new Fan("Auxiliary Fan #2", 4));

   607               break;

   608           }

   609           break;

   610         case Chip.W83627DHG:

   611         case Chip.W83627DHGP:

   612         case Chip.W83667HG:

   613         case Chip.W83667HGB:

   614           switch (manufacturer) {

   615             case Manufacturer.ASRock:

   616               switch (model) {

   617                 case Model._880GMH_USB3: // W83627DHG-P

   618                   v.Add(new Voltage("CPU VCore", 0));

   619                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   620                   v.Add(new Voltage("+5V", 5, 15, 7.5f));

   621                   v.Add(new Voltage("+12V", 6, 56, 10));

   622                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   623                   v.Add(new Voltage("VBAT", 8, 34, 34));

   624                   t.Add(new Temperature("CPU", 0));

   625                   t.Add(new Temperature("Motherboard", 2));

   626                   f.Add(new Fan("Chassis Fan", 0));

   627                   f.Add(new Fan("CPU Fan", 1));

   628                   f.Add(new Fan("Power Fan", 2));

   629                   break;

   630                 default:

   631                   v.Add(new Voltage("CPU VCore", 0));

   632                   v.Add(new Voltage("Voltage #2", 1, true));

   633                   v.Add(new Voltage("AVCC", 2, 34, 34));

   634                   v.Add(new Voltage("3VCC", 3, 34, 34));

   635                   v.Add(new Voltage("Voltage #5", 4, true));

   636                   v.Add(new Voltage("Voltage #6", 5, true));

   637                   v.Add(new Voltage("Voltage #7", 6, true));

   638                   v.Add(new Voltage("3VSB", 7, 34, 34));

   639                   v.Add(new Voltage("VBAT", 8, 34, 34));

   640                   t.Add(new Temperature("CPU", 0));

   641                   t.Add(new Temperature("Auxiliary", 1));

   642                   t.Add(new Temperature("System", 2));

   643                   f.Add(new Fan("System Fan", 0));

   644                   f.Add(new Fan("CPU Fan", 1));

   645                   f.Add(new Fan("Auxiliary Fan", 2));

   646                   f.Add(new Fan("CPU Fan #2", 3));

   647                   f.Add(new Fan("Auxiliary Fan #2", 4));

   648                   break;

   649               }

   650               break;

   651             case Manufacturer.ASUS:

   652               switch (model) {

   653                 case Model.P6X58D_E: // W83667HG

   654                 case Model.Rampage_II_GENE: // W83667HG

   655                   v.Add(new Voltage("CPU VCore", 0));

   656                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));

   657                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   658                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   659                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   660                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   661                   v.Add(new Voltage("VBAT", 8, 34, 34));

   662                   t.Add(new Temperature("CPU", 0));

   663                   t.Add(new Temperature("Motherboard", 2));

   664                   f.Add(new Fan("Chassis Fan #1", 0));

   665                   f.Add(new Fan("CPU Fan", 1));

   666                   f.Add(new Fan("Power Fan", 2));

   667                   f.Add(new Fan("Chassis Fan #2", 3));

   668                   f.Add(new Fan("Chassis Fan #3", 4));

   669                   break;

   670                 case Model.Rampage_Extreme: // W83667HG

   671                   v.Add(new Voltage("CPU VCore", 0));

   672                   v.Add(new Voltage("+12V", 1, 12, 2));

   673                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   674                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   675                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   676                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   677                   v.Add(new Voltage("VBAT", 8, 34, 34));

   678                   t.Add(new Temperature("CPU", 0));

   679                   t.Add(new Temperature("Motherboard", 2));

   680                   f.Add(new Fan("Chassis Fan #1", 0));

   681                   f.Add(new Fan("CPU Fan", 1));

   682                   f.Add(new Fan("Power Fan", 2));

   683                   f.Add(new Fan("Chassis Fan #2", 3));

   684                   f.Add(new Fan("Chassis Fan #3", 4));

   685                   break;

   686                 default:

   687                   v.Add(new Voltage("CPU VCore", 0));

   688                   v.Add(new Voltage("Voltage #2", 1, true));

   689                   v.Add(new Voltage("AVCC", 2, 34, 34));

   690                   v.Add(new Voltage("3VCC", 3, 34, 34));

   691                   v.Add(new Voltage("Voltage #5", 4, true));

   692                   v.Add(new Voltage("Voltage #6", 5, true));

   693                   v.Add(new Voltage("Voltage #7", 6, true));

   694                   v.Add(new Voltage("3VSB", 7, 34, 34));

   695                   v.Add(new Voltage("VBAT", 8, 34, 34));

   696                   t.Add(new Temperature("CPU", 0));

   697                   t.Add(new Temperature("Auxiliary", 1));

   698                   t.Add(new Temperature("System", 2));

   699                   f.Add(new Fan("System Fan", 0));

   700                   f.Add(new Fan("CPU Fan", 1));

   701                   f.Add(new Fan("Auxiliary Fan", 2));

   702                   f.Add(new Fan("CPU Fan #2", 3));

   703                   f.Add(new Fan("Auxiliary Fan #2", 4));

   704                   break;

   705               }

   706               break;

   707             default:

   708               v.Add(new Voltage("CPU VCore", 0));

   709               v.Add(new Voltage("Voltage #2", 1, true));

   710               v.Add(new Voltage("AVCC", 2, 34, 34));

   711               v.Add(new Voltage("3VCC", 3, 34, 34));

   712               v.Add(new Voltage("Voltage #5", 4, true));

   713               v.Add(new Voltage("Voltage #6", 5, true));

   714               v.Add(new Voltage("Voltage #7", 6, true));

   715               v.Add(new Voltage("3VSB", 7, 34, 34));

   716               v.Add(new Voltage("VBAT", 8, 34, 34));

   717               t.Add(new Temperature("CPU", 0));

   718               t.Add(new Temperature("Auxiliary", 1));

   719               t.Add(new Temperature("System", 2));

   720               f.Add(new Fan("System Fan", 0));

   721               f.Add(new Fan("CPU Fan", 1));

   722               f.Add(new Fan("Auxiliary Fan", 2));

   723               f.Add(new Fan("CPU Fan #2", 3));

   724               f.Add(new Fan("Auxiliary Fan #2", 4));

   725               break;

   726           }

   727           break;

   728         case Chip.W83627HF:

   729         case Chip.W83627THF:

   730         case Chip.W83687THF:

   731           v.Add(new Voltage("CPU VCore", 0));

   732           v.Add(new Voltage("Voltage #2", 1, true));

   733           v.Add(new Voltage("Voltage #3", 2, true));

   734           v.Add(new Voltage("AVCC", 3, 34, 51));

   735           v.Add(new Voltage("Voltage #5", 4, true));

   736           v.Add(new Voltage("5VSB", 5, 34, 51));

   737           v.Add(new Voltage("VBAT", 6));

   738           t.Add(new Temperature("CPU", 0));

   739           t.Add(new Temperature("Auxiliary", 1));

   740           t.Add(new Temperature("System", 2));

   741           f.Add(new Fan("System Fan", 0));

   742           f.Add(new Fan("CPU Fan", 1));

   743           f.Add(new Fan("Auxiliary Fan", 2));

   744           break;

   745         case Chip.NCT6771F:

   746         case Chip.NCT6776F:

   747           switch (manufacturer) {

   748             case Manufacturer.ASUS:

   749               switch (model) {

   750                 case Model.P8P67_PRO: // NCT6776F

   751                   v.Add(new Voltage("CPU VCore", 0));

   752                   v.Add(new Voltage("Voltage #2", 1, true));

   753                   v.Add(new Voltage("AVCC", 2, 34, 34));

   754                   v.Add(new Voltage("3VCC", 3, 34, 34));

   755                   v.Add(new Voltage("Voltage #5", 4, true));

   756                   v.Add(new Voltage("Voltage #6", 5, true));

   757                   v.Add(new Voltage("Voltage #7", 6, true));

   758                   v.Add(new Voltage("3VSB", 7, 34, 34));

   759                   v.Add(new Voltage("VBAT", 8, 34, 34));

   760                   t.Add(new Temperature("CPU", 0));

   761                   t.Add(new Temperature("Auxiliary", 1));

   762                   t.Add(new Temperature("System", 2));

   763                   f.Add(new Fan("System Fan", 0));

   764                   f.Add(new Fan("CPU Fan", 1));

   765                   f.Add(new Fan("Auxiliary Fan", 2));

   766                   f.Add(new Fan("Auxiliary Fan #2", 3));

   767                   f.Add(new Fan("Auxiliary Fan #3", 4));

   768                   break;

   769                 default:

   770                   v.Add(new Voltage("CPU VCore", 0));

   771                   v.Add(new Voltage("Voltage #2", 1, true));

   772                   v.Add(new Voltage("AVCC", 2, 34, 34));

   773                   v.Add(new Voltage("3VCC", 3, 34, 34));

   774                   v.Add(new Voltage("Voltage #5", 4, true));

   775                   v.Add(new Voltage("Voltage #6", 5, true));

   776                   v.Add(new Voltage("Voltage #7", 6, true));

   777                   v.Add(new Voltage("3VSB", 7, 34, 34));

   778                   v.Add(new Voltage("VBAT", 8, 34, 34));

   779                   t.Add(new Temperature("CPU", 0));

   780                   t.Add(new Temperature("Auxiliary", 1));

   781                   t.Add(new Temperature("System", 2));

   782                   for (int i = 0; i < superIO.Fans.Length; i++)

   783                     f.Add(new Fan("Fan #" + (i + 1), i));

   784                   break;

   785               }

   786               break;

   787             default:

   788               v.Add(new Voltage("CPU VCore", 0));

   789               v.Add(new Voltage("Voltage #2", 1, true));

   790               v.Add(new Voltage("AVCC", 2, 34, 34));

   791               v.Add(new Voltage("3VCC", 3, 34, 34));

   792               v.Add(new Voltage("Voltage #5", 4, true));

   793               v.Add(new Voltage("Voltage #6", 5, true));

   794               v.Add(new Voltage("Voltage #7", 6, true));

   795               v.Add(new Voltage("3VSB", 7, 34, 34));

   796               v.Add(new Voltage("VBAT", 8, 34, 34));

   797               t.Add(new Temperature("CPU", 0));

   798               t.Add(new Temperature("Auxiliary", 1));

   799               t.Add(new Temperature("System", 2));

   800               for (int i = 0; i < superIO.Fans.Length; i++)

   801                 f.Add(new Fan("Fan #" + (i + 1), i));

   802               break;

   803           }

   804           break;

   805         default:

   806           for (int i = 0; i < superIO.Voltages.Length; i++)

   807             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   808           for (int i = 0; i < superIO.Temperatures.Length; i++)

   809             t.Add(new Temperature("Temperature #" + (i + 1), i));

   810           for (int i = 0; i < superIO.Fans.Length; i++)

   811             f.Add(new Fan("Fan #" + (i + 1), i));

   812           break;

   813       }

   815       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   816       foreach (Voltage voltage in v)

   817         if (voltage.Index < superIO.Voltages.Length) {

   818           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   819             voltage.Hidden, SensorType.Voltage, this, new [] {

   820             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   821               formula, voltage.Ri),

   822             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   823               formula, voltage.Rf),

   824             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   825               formula, voltage.Vf)

   826             }, settings);

   827           voltages.Add(sensor);

   828       }

   830       foreach (Temperature temperature in t)

   831         if (temperature.Index < superIO.Temperatures.Length) {

   832         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   833           SensorType.Temperature, this, new [] {

   834           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   835         }, settings);

   836         temperatures.Add(sensor);

   837       }

   839       foreach (Fan fan in f)

   840         if (fan.Index < superIO.Fans.Length) {

   841           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   842             this, settings);

   843           fans.Add(sensor);

   844         }

   845     }

   847     public override HardwareType HardwareType {

   848       get { return HardwareType.SuperIO; }

   849     }

   851     public override IHardware Parent {

   852       get { return mainboard; }

   853     }

   856     public override string GetReport() {

   857       return superIO.GetReport();

   858     }

   860     public override void Update() {

   861       superIO.Update();

   863       foreach (Sensor sensor in voltages) {

   864         float? value = readVoltage(sensor.Index);

   865         if (value.HasValue) {

   866           sensor.Value = value + (value - sensor.Parameters[2].Value) *

   867             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

   868           ActivateSensor(sensor);

   869         }

   870       }

   872       foreach (Sensor sensor in temperatures) {

   873         float? value = readTemperature(sensor.Index);

   874         if (value.HasValue) {

   875           sensor.Value = value + sensor.Parameters[0].Value;

   876           ActivateSensor(sensor);

   877         }

   878       }

   880       foreach (Sensor sensor in fans) {

   881         float? value = readFan(sensor.Index);

   882         if (value.HasValue) {

   883           sensor.Value = value;

   884           if (value.Value > 0)

   885             ActivateSensor(sensor);

   886         }

   887       }

   889       postUpdate();

   890     }

   892     private class Voltage {

   893       public readonly string Name;

   894       public readonly int Index;

   895       public readonly float Ri;

   896       public readonly float Rf;

   897       public readonly float Vf;

   898       public readonly bool Hidden;

   900       public Voltage(string name, int index) :

   901         this(name, index, false) { }

   903       public Voltage(string name, int index, bool hidden) :

   904         this(name, index, 0, 1, 0, hidden) { }

   906       public Voltage(string name, int index, float ri, float rf) :

   907         this(name, index, ri, rf, 0, false) { }

   909       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)

   911       public Voltage(string name, int index,

   912         float ri, float rf, float vf, bool hidden)

   913       {

   914         this.Name = name;

   915         this.Index = index;

   916         this.Ri = ri;

   917         this.Rf = rf;

   918         this.Vf = vf;

   919         this.Hidden = hidden;

   920       }

   921     }

   923     private class Temperature {

   924       public readonly string Name;

   925       public readonly int Index;

   927       public Temperature(string name, int index) {

   928         this.Name = name;

   929         this.Index = index;

   930       }

   931     }

   933     private class Fan {

   934       public readonly string Name;

   935       public readonly int Index;

   937       public Fan(string name, int index) {

   938         this.Name = name;

   939         this.Index = index;

   940       }

   941     }

   942   }

   943 }

author	moel.mich
	Sat, 30 Apr 2011 16:03:58 +0000
changeset 275	35788ddd1825
parent 265	961c07a3bd78
child 276	04905193c432
permissions	-rw-r--r--