OpenHardwareMonitor: Hardware/Mainboard/SuperIOHardware.cs@31858ba46e9c

     1 /*

     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1

     5   The contents of this file are subject to the Mozilla Public License Version

     6   1.1 (the "License"); you may not use this file except in compliance with

     7   the License. You may obtain a copy of the License at

     9   http://www.mozilla.org/MPL/

    11   Software distributed under the License is distributed on an "AS IS" basis,

    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

    13   for the specific language governing rights and limitations under the License.

    15   The Original Code is the Open Hardware Monitor code.

    17   The Initial Developer of the Original Code is

    18   Michael Möller <m.moeller@gmx.ch>.

    19   Portions created by the Initial Developer are Copyright (C) 2009-2010

    20   the Initial Developer. All Rights Reserved.

    22   Contributor(s):

    24   Alternatively, the contents of this file may be used under the terms of

    25   either the GNU General Public License Version 2 or later (the "GPL"), or

    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

    27   in which case the provisions of the GPL or the LGPL are applicable instead

    28   of those above. If you wish to allow use of your version of this file only

    29   under the terms of either the GPL or the LGPL, and not to allow others to

    30   use your version of this file under the terms of the MPL, indicate your

    31   decision by deleting the provisions above and replace them with the notice

    32   and other provisions required by the GPL or the LGPL. If you do not delete

    33   the provisions above, a recipient may use your version of this file under

    34   the terms of any one of the MPL, the GPL or the LGPL.

    36 */

    38 using System;

    39 using System.Collections.Generic;

    40 using System.Globalization;

    41 using OpenHardwareMonitor.Hardware.LPC;

    43 namespace OpenHardwareMonitor.Hardware.Mainboard {

    44   internal class SuperIOHardware : Hardware {

    46     private ISuperIO superIO;

    47     private string name;

    49     private List<Sensor> voltages = new List<Sensor>();

    50     private List<Sensor> temperatures = new List<Sensor>();

    51     private List<Sensor> fans = new List<Sensor>();

    54     public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer,

    55       Model model, ISettings settings)

    56     {

    57       this.superIO = superIO;

    58       this.name = ChipName.GetName(superIO.Chip);

    60       List<Voltage> v = new List<Voltage>();

    61       List<Temperature> t = new List<Temperature>();

    62       List<Fan> f = new List<Fan>();

    64       switch (superIO.Chip) {

    65         case Chip.IT8712F:

    66         case Chip.IT8716F:

    67         case Chip.IT8718F:

    68         case Chip.IT8720F:

    69         case Chip.IT8726F:

    70           switch (manufacturer) {

    71             case Manufacturer.ASUS:

    72               switch (model) {

    73                 case Model.Crosshair_III_Formula: // IT8720F

    74                   v.Add(new Voltage("VBat", 8));

    75                   t.Add(new Temperature("CPU", 0));

    76                   for (int i = 0; i < superIO.Fans.Length; i++)

    77                     f.Add(new Fan("Fan #" + (i + 1), i));

    78                   break;

    79                 case Model.M2N_SLI_DELUXE:

    80                   v.Add(new Voltage("CPU VCore", 0));

    81                   v.Add(new Voltage("+3.3V", 1));

    82                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

    83                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

    84                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

    85                   v.Add(new Voltage("VBat", 8));

    86                   t.Add(new Temperature("CPU", 0));

    87                   t.Add(new Temperature("Motherboard", 1));

    88                   f.Add(new Fan("CPU Fan", 0));

    89                   f.Add(new Fan("Chassis Fan #1", 1));

    90                   f.Add(new Fan("Power Fan", 2));

    91                   break;

    92                 case Model.M4A79XTD_EVO: // IT8720F

    93                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

    94                   v.Add(new Voltage("VBat", 8));

    95                   t.Add(new Temperature("CPU", 0));

    96                   t.Add(new Temperature("Motherboard", 1));

    97                   f.Add(new Fan("CPU Fan", 0));

    98                   f.Add(new Fan("Chassis Fan #1", 1));

    99                   f.Add(new Fan("Chassis Fan #2", 2));

   100                   break;

   101                 default:

   102                   v.Add(new Voltage("CPU VCore", 0));

   103                   v.Add(new Voltage("Voltage #2", 1, true));

   104                   v.Add(new Voltage("Voltage #3", 2, true));

   105                   v.Add(new Voltage("Voltage #4", 3, true));

   106                   v.Add(new Voltage("Voltage #5", 4, true));

   107                   v.Add(new Voltage("Voltage #6", 5, true));

   108                   v.Add(new Voltage("Voltage #7", 6, true));

   109                   v.Add(new Voltage("Voltage #8", 7, true));

   110                   v.Add(new Voltage("VBat", 8));

   111                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   112                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   113                   for (int i = 0; i < superIO.Fans.Length; i++)

   114                     f.Add(new Fan("Fan #" + (i + 1), i));

   115                   break;

   116               }

   117               break;

   118             case Manufacturer.DFI:

   119               switch (model) {

   120                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   121                   v.Add(new Voltage("CPU VCore", 0));

   122                   v.Add(new Voltage("FSB VTT", 1));

   123                   v.Add(new Voltage("+3.3V", 2));

   124                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   125                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

   126                   v.Add(new Voltage("NB Core", 5));

   127                   v.Add(new Voltage("VDIMM", 6));

   128                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

   129                   v.Add(new Voltage("VBat", 8));

   130                   t.Add(new Temperature("CPU", 0));

   131                   t.Add(new Temperature("System", 1));

   132                   t.Add(new Temperature("Chipset", 2));

   133                   f.Add(new Fan("Fan #1", 0));

   134                   f.Add(new Fan("Fan #2", 1));

   135                   f.Add(new Fan("Fan #3", 2));

   136                   break;

   137                 case Model.LP_DK_P55_T3eH9: // IT8720F

   138                   v.Add(new Voltage("CPU VCore", 0));

   139                   v.Add(new Voltage("VTT", 1));

   140                   v.Add(new Voltage("+3.3V", 2));

   141                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   142                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

   143                   v.Add(new Voltage("CPU PLL", 5));

   144                   v.Add(new Voltage("DRAM", 6));

   145                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

   146                   v.Add(new Voltage("VBat", 8));

   147                   t.Add(new Temperature("Chipset", 0));

   148                   t.Add(new Temperature("CPU PWM", 1));

   149                   t.Add(new Temperature("CPU", 2));

   150                   f.Add(new Fan("Fan #1", 0));

   151                   f.Add(new Fan("Fan #2", 1));

   152                   f.Add(new Fan("Fan #3", 2));

   153                   break;

   154                 default:

   155                   v.Add(new Voltage("CPU VCore", 0));

   156                   v.Add(new Voltage("VTT", 1, true));

   157                   v.Add(new Voltage("+3.3V", 2, true));

   158                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   159                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   160                   v.Add(new Voltage("Voltage #6", 5, true));

   161                   v.Add(new Voltage("DRAM", 6, true));

   162                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   163                   v.Add(new Voltage("VBat", 8));

   164                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   165                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   166                   for (int i = 0; i < superIO.Fans.Length; i++)

   167                     f.Add(new Fan("Fan #" + (i + 1), i));

   168                   break;

   169               }

   170               break;

   172             case Manufacturer.Gigabyte:

   173               switch (model) {

   174                 case Model._965P_S3: // IT8718F

   175                   v.Add(new Voltage("CPU VCore", 0));

   176                   v.Add(new Voltage("DRAM", 1));

   177                   v.Add(new Voltage("+3.3V", 2));

   178                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   179                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   180                   v.Add(new Voltage("VBat", 8));

   181                   t.Add(new Temperature("System", 0));

   182                   t.Add(new Temperature("CPU", 1));

   183                   f.Add(new Fan("CPU Fan", 0));

   184                   f.Add(new Fan("System Fan", 1));

   185                   break;

   186                 case Model.EP45_DS3R: // IT8718F

   187                 case Model.EP45_UD3R:

   188                 case Model.X38_DS5:

   189                   v.Add(new Voltage("CPU VCore", 0));

   190                   v.Add(new Voltage("DRAM", 1));

   191                   v.Add(new Voltage("+3.3V", 2));

   192                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   193                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   194                   v.Add(new Voltage("VBat", 8));

   195                   t.Add(new Temperature("System", 0));

   196                   t.Add(new Temperature("CPU", 1));

   197                   f.Add(new Fan("CPU Fan", 0));

   198                   f.Add(new Fan("System Fan #2", 1));

   199                   f.Add(new Fan("Power Fan", 2));

   200                   f.Add(new Fan("System Fan #1", 3));

   201                   break;

   202                 case Model.EX58_EXTREME: // IT8720F

   203                   v.Add(new Voltage("CPU VCore", 0));

   204                   v.Add(new Voltage("DRAM", 1));

   205                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   206                   v.Add(new Voltage("VBat", 8));

   207                   t.Add(new Temperature("System", 0));

   208                   t.Add(new Temperature("CPU", 1));

   209                   t.Add(new Temperature("Northbridge", 2));

   210                   f.Add(new Fan("CPU Fan", 0));

   211                   f.Add(new Fan("System Fan #2", 1));

   212                   f.Add(new Fan("Power Fan", 2));

   213                   f.Add(new Fan("System Fan #1", 3));

   214                   break;

   215                 case Model.P35_DS3: // IT8718F

   216                 case Model.P35_DS3L: // IT8718F

   217                   v.Add(new Voltage("CPU VCore", 0));

   218                   v.Add(new Voltage("DRAM", 1));

   219                   v.Add(new Voltage("+3.3V", 2));

   220                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   221                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   222                   v.Add(new Voltage("VBat", 8));

   223                   t.Add(new Temperature("System", 0));

   224                   t.Add(new Temperature("CPU", 1));

   225                   f.Add(new Fan("CPU Fan", 0));

   226                   f.Add(new Fan("System Fan #1", 1));

   227                   f.Add(new Fan("System Fan #2", 2));

   228                   f.Add(new Fan("Power Fan", 3));

   229                   break;

   230                 case Model.P55_UD4: // IT8720F

   231                 case Model.P55M_UD4: // IT8720F

   232                   v.Add(new Voltage("CPU VCore", 0));

   233                   v.Add(new Voltage("DRAM", 1));

   234                   v.Add(new Voltage("+3.3V", 2));

   235                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   236                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

   237                   v.Add(new Voltage("VBat", 8));

   238                   t.Add(new Temperature("System", 0));

   239                   t.Add(new Temperature("CPU", 2));

   240                   f.Add(new Fan("CPU Fan", 0));

   241                   f.Add(new Fan("System Fan #2", 1));

   242                   f.Add(new Fan("Power Fan", 2));

   243                   f.Add(new Fan("System Fan #1", 3));

   244                   break;

   245                 case Model.GA_MA770T_UD3: // IT8720F

   246                   v.Add(new Voltage("CPU VCore", 0));

   247                   v.Add(new Voltage("DRAM", 1));

   248                   v.Add(new Voltage("+3.3V", 2));

   249                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   250                   v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));

   251                   v.Add(new Voltage("VBat", 8));

   252                   t.Add(new Temperature("System", 0));

   253                   t.Add(new Temperature("CPU", 1));

   254                   f.Add(new Fan("CPU Fan", 0));

   255                   f.Add(new Fan("System Fan #1", 1));

   256                   f.Add(new Fan("System Fan #2", 2));

   257                   f.Add(new Fan("Power Fan", 3));

   258                   break;

   259                 case Model.GA_MA785GMT_UD2H: // IT8718F

   260                   v.Add(new Voltage("CPU VCore", 0));

   261                   v.Add(new Voltage("DRAM", 1));

   262                   v.Add(new Voltage("+3.3V", 2));

   263                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   264                   v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));

   265                   v.Add(new Voltage("VBat", 8));

   266                   t.Add(new Temperature("System", 0));

   267                   t.Add(new Temperature("CPU", 1));

   268                   f.Add(new Fan("CPU Fan", 0));

   269                   f.Add(new Fan("System Fan", 1));

   270                   f.Add(new Fan("NB Fan", 2));

   271                   break;

   272                 case Model.X58A_UD3R: // IT8720F

   273                   v.Add(new Voltage("CPU VCore", 0));

   274                   v.Add(new Voltage("DRAM", 1));

   275                   v.Add(new Voltage("+3.3V", 2));

   276                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   277                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

   278                   v.Add(new Voltage("VBat", 8));

   279                   t.Add(new Temperature("System", 0));

   280                   t.Add(new Temperature("CPU", 1));

   281                   t.Add(new Temperature("Northbridge", 2));

   282                   f.Add(new Fan("CPU Fan", 0));

   283                   f.Add(new Fan("System Fan #2", 1));

   284                   f.Add(new Fan("Power Fan", 2));

   285                   f.Add(new Fan("System Fan #1", 3));

   286                   break;

   287                 default:

   288                   v.Add(new Voltage("CPU VCore", 0));

   289                   v.Add(new Voltage("DRAM", 1, true));

   290                   v.Add(new Voltage("+3.3V", 2, true));

   291                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   292                   v.Add(new Voltage("Voltage #5", 4, true));

   293                   v.Add(new Voltage("Voltage #6", 5, true));

   294                   v.Add(new Voltage("Voltage #7", 6, true));

   295                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));

   296                   v.Add(new Voltage("VBat", 8));

   297                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   298                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   299                   for (int i = 0; i < superIO.Fans.Length; i++)

   300                     f.Add(new Fan("Fan #" + (i + 1), i));

   301                   break;

   302               }

   303               break;

   305             default:

   306               v.Add(new Voltage("CPU VCore", 0));

   307               v.Add(new Voltage("Voltage #2", 1, true));

   308               v.Add(new Voltage("Voltage #3", 2, true));

   309               v.Add(new Voltage("Voltage #4", 3, true));

   310               v.Add(new Voltage("Voltage #5", 4, true));

   311               v.Add(new Voltage("Voltage #6", 5, true));

   312               v.Add(new Voltage("Voltage #7", 6, true));

   313               v.Add(new Voltage("Voltage #8", 7, true));

   314               v.Add(new Voltage("VBat", 8));

   315               for (int i = 0; i < superIO.Temperatures.Length; i++)

   316                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   317               for (int i = 0; i < superIO.Fans.Length; i++)

   318                 f.Add(new Fan("Fan #" + (i + 1), i));

   319               break;

   320           }

   321           break;

   323         case Chip.IT8721F:

   324           v.Add(new Voltage("Voltage #1", 0, true));

   325           v.Add(new Voltage("Voltage #2", 1, true));

   326           v.Add(new Voltage("Voltage #3", 2, true));

   327           v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   328           v.Add(new Voltage("Voltage #5", 4, true));

   329           v.Add(new Voltage("Voltage #6", 5, true));

   330           v.Add(new Voltage("Voltage #7", 6, true));

   331           v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   332           v.Add(new Voltage("VBat", 8, 10, 10, 0));

   333           for (int i = 0; i < superIO.Temperatures.Length; i++)

   334             t.Add(new Temperature("Temperature #" + (i + 1), i));

   335           for (int i = 0; i < superIO.Fans.Length; i++)

   336             f.Add(new Fan("Fan #" + (i + 1), i));

   337           break;

   339         case Chip.F71858:

   340           v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   341           v.Add(new Voltage("VSB3V", 1, 150, 150, 0));

   342           v.Add(new Voltage("Battery", 2, 150, 150, 0));

   343           for (int i = 0; i < superIO.Temperatures.Length; i++)

   344             t.Add(new Temperature("Temperature #" + (i + 1), i));

   345           for (int i = 0; i < superIO.Fans.Length; i++)

   346             f.Add(new Fan("Fan #" + (i + 1), i));

   347           break;

   348         case Chip.F71862:

   349         case Chip.F71869:

   350         case Chip.F71882:

   351         case Chip.F71889ED:

   352         case Chip.F71889F:

   353           switch (manufacturer) {

   354             case Manufacturer.EVGA:

   355               switch (model) {

   356                 case Model.X58_SLI_Classified: // F71882

   357                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   358                   v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));

   359                   v.Add(new Voltage("DIMM", 2, 47, 100, 0));

   360                   v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));

   361                   v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));

   362                   v.Add(new Voltage("+5V", 5, 51, 12, 0));

   363                   v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));

   364                   v.Add(new Voltage("3VSB", 7, 150, 150, 0));

   365                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

   366                   t.Add(new Temperature("CPU", 0));

   367                   t.Add(new Temperature("VREG", 1));

   368                   t.Add(new Temperature("System", 2));

   369                   f.Add(new Fan("CPU Fan", 0));

   370                   f.Add(new Fan("Power Fan", 1));

   371                   f.Add(new Fan("Chassis Fan", 2));

   372                   break;

   373                 default:

   374                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   375                   v.Add(new Voltage("CPU VCore", 1));

   376                   v.Add(new Voltage("Voltage #3", 2, true));

   377                   v.Add(new Voltage("Voltage #4", 3, true));

   378                   v.Add(new Voltage("Voltage #5", 4, true));

   379                   v.Add(new Voltage("Voltage #6", 5, true));

   380                   v.Add(new Voltage("Voltage #7", 6, true));

   381                   v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

   382                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

   383                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   384                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   385                   for (int i = 0; i < superIO.Fans.Length; i++)

   386                     f.Add(new Fan("Fan #" + (i + 1), i));

   387                   break;

   388               }

   389               break;

   390             default:

   391               v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   392               v.Add(new Voltage("CPU VCore", 1));

   393               v.Add(new Voltage("Voltage #3", 2, true));

   394               v.Add(new Voltage("Voltage #4", 3, true));

   395               v.Add(new Voltage("Voltage #5", 4, true));

   396               v.Add(new Voltage("Voltage #6", 5, true));

   397               v.Add(new Voltage("Voltage #7", 6, true));

   398               v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

   399               v.Add(new Voltage("VBat", 8, 150, 150, 0));

   400               for (int i = 0; i < superIO.Temperatures.Length; i++)

   401                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   402               for (int i = 0; i < superIO.Fans.Length; i++)

   403                 f.Add(new Fan("Fan #" + (i + 1), i));

   404               break;

   405           }

   406           break;

   408         case Chip.W83627EHF:

   409           v.Add(new Voltage("CPU VCore", 0));

   410           v.Add(new Voltage("Voltage #2", 1, true));

   411           v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   412           v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   413           v.Add(new Voltage("Voltage #5", 4, true));

   414           v.Add(new Voltage("Voltage #6", 5, true));

   415           v.Add(new Voltage("Voltage #7", 6, true));

   416           v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   417           v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   418           v.Add(new Voltage("Voltage #10", 9, true));

   419           t.Add(new Temperature("CPU", 0));

   420           t.Add(new Temperature("Auxiliary", 1));

   421           t.Add(new Temperature("System", 2));

   422           f.Add(new Fan("System Fan", 0));

   423           f.Add(new Fan("CPU Fan", 1));

   424           f.Add(new Fan("Auxiliary Fan", 2));

   425           f.Add(new Fan("CPU Fan #2", 3));

   426           f.Add(new Fan("Auxiliary Fan #2", 4));

   427           break;

   428         case Chip.W83627DHG:

   429         case Chip.W83627DHGP:

   430         case Chip.W83667HG:

   431         case Chip.W83667HGB:

   432           switch (manufacturer) {

   433             case Manufacturer.ASRock:

   434               switch (model) {

   435                 case Model._880GMH_USB3: // W83627DHG-P

   436                   v.Add(new Voltage("CPU VCore", 0));

   437                   v.Add(new Voltage("+3.3V", 3, 34, 34, 0));

   438                   v.Add(new Voltage("+5V", 5, 15, 7.5f, 0));

   439                   v.Add(new Voltage("+12V", 6, 56, 10, 0));

   440                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));

   441                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   442                   t.Add(new Temperature("CPU", 0));

   443                   t.Add(new Temperature("Motherboard", 2));

   444                   f.Add(new Fan("Chassis Fan", 0));

   445                   f.Add(new Fan("CPU Fan", 1));

   446                   f.Add(new Fan("Power Fan", 2));

   447                   break;

   448                 default:

   449                   v.Add(new Voltage("CPU VCore", 0));

   450                   v.Add(new Voltage("Voltage #2", 1, true));

   451                   v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   452                   v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   453                   v.Add(new Voltage("Voltage #5", 4, true));

   454                   v.Add(new Voltage("Voltage #6", 5, true));

   455                   v.Add(new Voltage("Voltage #7", 6, true));

   456                   v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   457                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   458                   t.Add(new Temperature("CPU", 0));

   459                   t.Add(new Temperature("Auxiliary", 1));

   460                   t.Add(new Temperature("System", 2));

   461                   f.Add(new Fan("System Fan", 0));

   462                   f.Add(new Fan("CPU Fan", 1));

   463                   f.Add(new Fan("Auxiliary Fan", 2));

   464                   f.Add(new Fan("CPU Fan #2", 3));

   465                   f.Add(new Fan("Auxiliary Fan #2", 4));

   466                   break;

   467               }

   468               break;

   469             case Manufacturer.ASUS:

   470               switch (model) {

   471                 case Model.P6X58D_E: // W83667HG

   472                   v.Add(new Voltage("CPU VCore", 0));

   473                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f, 0));

   474                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));

   475                   v.Add(new Voltage("+3.3V", 3, 34, 34, 0));

   476                   v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));

   477                   v.Add(new Voltage("Voltage #6", 5, true));

   478                   v.Add(new Voltage("Voltage #7", 6, true));

   479                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));

   480                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   481                   t.Add(new Temperature("CPU", 0));

   482                   t.Add(new Temperature("Motherboard", 2));

   483                   f.Add(new Fan("Chassis Fan #1", 0));

   484                   f.Add(new Fan("CPU Fan", 1));

   485                   f.Add(new Fan("Power Fan", 2));

   486                   f.Add(new Fan("Chassis Fan #2", 3));

   487                   f.Add(new Fan("Chassis Fan #3", 4));

   488                   break;

   489                 default:

   490                   v.Add(new Voltage("CPU VCore", 0));

   491                   v.Add(new Voltage("Voltage #2", 1, true));

   492                   v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   493                   v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   494                   v.Add(new Voltage("Voltage #5", 4, true));

   495                   v.Add(new Voltage("Voltage #6", 5, true));

   496                   v.Add(new Voltage("Voltage #7", 6, true));

   497                   v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   498                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   499                   t.Add(new Temperature("CPU", 0));

   500                   t.Add(new Temperature("Auxiliary", 1));

   501                   t.Add(new Temperature("System", 2));

   502                   f.Add(new Fan("System Fan", 0));

   503                   f.Add(new Fan("CPU Fan", 1));

   504                   f.Add(new Fan("Auxiliary Fan", 2));

   505                   f.Add(new Fan("CPU Fan #2", 3));

   506                   f.Add(new Fan("Auxiliary Fan #2", 4));

   507                   break;

   508               }

   509               break;

   510             default:

   511               v.Add(new Voltage("CPU VCore", 0));

   512               v.Add(new Voltage("Voltage #2", 1, true));

   513               v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   514               v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   515               v.Add(new Voltage("Voltage #5", 4, true));

   516               v.Add(new Voltage("Voltage #6", 5, true));

   517               v.Add(new Voltage("Voltage #7", 6, true));

   518               v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   519               v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   520               t.Add(new Temperature("CPU", 0));

   521               t.Add(new Temperature("Auxiliary", 1));

   522               t.Add(new Temperature("System", 2));

   523               f.Add(new Fan("System Fan", 0));

   524               f.Add(new Fan("CPU Fan", 1));

   525               f.Add(new Fan("Auxiliary Fan", 2));

   526               f.Add(new Fan("CPU Fan #2", 3));

   527               f.Add(new Fan("Auxiliary Fan #2", 4));

   528               break;

   529           }

   530           break;

   531         case Chip.W83627HF:

   532         case Chip.W83627THF:

   533         case Chip.W83687THF:

   534           v.Add(new Voltage("CPU VCore", 0));

   535           v.Add(new Voltage("Voltage #2", 1, true));

   536           v.Add(new Voltage("Voltage #3", 2, true));

   537           v.Add(new Voltage("AVCC", 3, 34, 51, 0));

   538           v.Add(new Voltage("Voltage #5", 4, true));

   539           v.Add(new Voltage("5VSB", 5, 34, 51, 0));

   540           v.Add(new Voltage("VBAT", 6));

   541           t.Add(new Temperature("CPU", 0));

   542           t.Add(new Temperature("Auxiliary", 1));

   543           t.Add(new Temperature("System", 2));

   544           f.Add(new Fan("System Fan", 0));

   545           f.Add(new Fan("CPU Fan", 1));

   546           f.Add(new Fan("Auxiliary Fan", 2));

   547           break;

   548         default:

   549           for (int i = 0; i < superIO.Voltages.Length; i++)

   550             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   551           for (int i = 0; i < superIO.Temperatures.Length; i++)

   552             t.Add(new Temperature("Temperature #" + (i + 1), i));

   553           for (int i = 0; i < superIO.Fans.Length; i++)

   554             f.Add(new Fan("Fan #" + (i + 1), i));

   555           break;

   556       }

   558       string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   559       foreach (Voltage voltage in v)

   560         if (voltage.Index < superIO.Voltages.Length) {

   561           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   562             voltage.Hidden, SensorType.Voltage, this,

   563             new ParameterDescription[] {

   564             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   565               formula, voltage.Ri),

   566             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   567               formula, voltage.Rf),

   568             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   569               formula, voltage.Vf)

   570             }, settings);

   571           voltages.Add(sensor);

   572       }

   574       foreach (Temperature temperature in t)

   575         if (temperature.Index < superIO.Temperatures.Length) {

   576         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   577           SensorType.Temperature, this, new ParameterDescription[] {

   578           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   579         }, settings);

   580         temperatures.Add(sensor);

   581       }

   583       foreach (Fan fan in f)

   584         if (fan.Index < superIO.Fans.Length) {

   585           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   586             this, settings);

   587           fans.Add(sensor);

   588         }

   589     }

   591     public override Identifier Identifier {

   592       get {

   593         return new Identifier("lpc",

   594           superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));

   595       }

   596     }

   598     public override HardwareType HardwareType {

   599       get { return HardwareType.SuperIO; }

   600     }

   602     public override string Name {

   603       get { return name; }

   604     }

   606     public override string GetReport() {

   607       return superIO.GetReport();

   608     }

   610     public override void Update() {

   611       superIO.Update();

   613       foreach (Sensor sensor in voltages) {

   614         float? value = superIO.Voltages[sensor.Index];

   615         if (value.HasValue) {

   616           sensor.Value = value + (value - sensor.Parameters[2].Value) *

   617             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

   618           ActivateSensor(sensor);

   619         }

   620       }

   622       foreach (Sensor sensor in temperatures) {

   623         float? value = superIO.Temperatures[sensor.Index];

   624         if (value.HasValue) {

   625           sensor.Value = value + sensor.Parameters[0].Value;

   626           ActivateSensor(sensor);

   627         }

   628       }

   630       foreach (Sensor sensor in fans) {

   631         float? value = superIO.Fans[sensor.Index];

   632         if (value.HasValue) {

   633           sensor.Value = value;

   634           if (value.Value > 0)

   635             ActivateSensor(sensor);

   636         }

   637       }

   638     }

   640     private class Voltage {

   641       public readonly string Name;

   642       public readonly int Index;

   643       public readonly float Ri;

   644       public readonly float Rf;

   645       public readonly float Vf;

   646       public readonly bool Hidden;

   648       public Voltage(string name, int index) :

   649         this(name, index, 0, 1, 0, false) { }

   651       public Voltage(string name, int index, bool hidden) :

   652         this(name, index, 0, 1, 0, hidden) { }

   654       public Voltage(string name, int index, float ri, float rf, float vf) :

   655         this(name, index, ri, rf, vf, false) { }

   657       public Voltage(string name, int index, float ri, float rf, float vf,

   658         bool hidden) {

   659         this.Name = name;

   660         this.Index = index;

   661         this.Ri = ri;

   662         this.Rf = rf;

   663         this.Vf = vf;

   664         this.Hidden = hidden;

   665       }

   666     }

   668     private class Temperature {

   669       public readonly string Name;

   670       public readonly int Index;

   672       public Temperature(string name, int index) {

   673         this.Name = name;

   674         this.Index = index;

   675       }

   676     }

   678     private class Fan {

   679       public readonly string Name;

   680       public readonly int Index;

   682       public Fan(string name, int index) {

   683         this.Name = name;

   684         this.Index = index;

   685       }

   686     }

   687   }

   688 }

author	moel.mich
	Tue, 17 Aug 2010 21:44:02 +0000
changeset 170	31858ba46e9c
parent 168	7f90baeb96b0
child 174	51d62ed28ff5
permissions	-rw-r--r--