/*

  Version: MPL 1.1/GPL 2.0/LGPL 2.1

  The contents of this file are subject to the Mozilla Public License Version

  1.1 (the "License"); you may not use this file except in compliance with

  the License. You may obtain a copy of the License at

  http://www.mozilla.org/MPL/

  Software distributed under the License is distributed on an "AS IS" basis,

  WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

  for the specific language governing rights and limitations under the License.

  The Original Code is the Open Hardware Monitor code.

  The Initial Developer of the Original Code is 

  Michael Möller <m.moeller@gmx.ch>.

  Portions created by the Initial Developer are Copyright (C) 2009-2010

  the Initial Developer. All Rights Reserved.

  Contributor(s):

  Alternatively, the contents of this file may be used under the terms of

  either the GNU General Public License Version 2 or later (the "GPL"), or

  the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

  in which case the provisions of the GPL or the LGPL are applicable instead

  of those above. If you wish to allow use of your version of this file only

  under the terms of either the GPL or the LGPL, and not to allow others to

  use your version of this file under the terms of the MPL, indicate your

  decision by deleting the provisions above and replace them with the notice

  and other provisions required by the GPL or the LGPL. If you do not delete

  the provisions above, a recipient may use your version of this file under

  the terms of any one of the MPL, the GPL or the LGPL.

*/

using System;

using System.Collections.Generic;

using System.Text;

using System.Threading;

namespace OpenHardwareMonitor.Hardware.LPC {

  public class LPCGroup : IGroup {

    private List<IHardware> hardware = new List<IHardware>();

    private StringBuilder report = new StringBuilder();

    private Chip chip = Chip.Unknown;

    // I/O Ports

    private ushort[] REGISTER_PORTS = new ushort[] { 0x2e, 0x4e };

    private ushort[] VALUE_PORTS = new ushort[] { 0x2f, 0x4f };

    private ushort registerPort;

    private ushort valuePort;

    // Registers

    private const byte CONFIGURATION_CONTROL_REGISTER = 0x02;

    private const byte DEVCIE_SELECT_REGISTER = 0x07;

    private const byte CHIP_ID_REGISTER = 0x20;

    private const byte CHIP_REVISION_REGISTER = 0x21;

    private const byte BASE_ADDRESS_REGISTER = 0x60;

    private byte ReadByte(byte register) {

      WinRing0.WriteIoPortByte(registerPort, register);

      return WinRing0.ReadIoPortByte(valuePort);

    } 

    private ushort ReadWord(byte register) {

      return (ushort)((ReadByte(register) << 8) | 

        ReadByte((byte)(register + 1)));

    }

    private void Select(byte logicalDeviceNumber) {

      WinRing0.WriteIoPortByte(registerPort, DEVCIE_SELECT_REGISTER);

      WinRing0.WriteIoPortByte(valuePort, logicalDeviceNumber);

    }

    // ITE

    private const byte IT87_ENVIRONMENT_CONTROLLER_LDN = 0x04;    

    private void IT87Enter() {

      WinRing0.WriteIoPortByte(registerPort, 0x87);

      WinRing0.WriteIoPortByte(registerPort, 0x01);

      WinRing0.WriteIoPortByte(registerPort, 0x55);

      WinRing0.WriteIoPortByte(registerPort, 0x55);

    }

    internal void IT87Exit() {

      WinRing0.WriteIoPortByte(registerPort, CONFIGURATION_CONTROL_REGISTER);

      WinRing0.WriteIoPortByte(valuePort, 0x02);

    }

    // Winbond, Fintek

    private const byte FINTEK_VENDOR_ID_REGISTER = 0x23;

    private const ushort FINTEK_VENDOR_ID = 0x1934;

    private const byte WINBOND_HARDWARE_MONITOR_LDN = 0x0B;

    private const byte F71858_HARDWARE_MONITOR_LDN = 0x02;

    private const byte FINTEK_HARDWARE_MONITOR_LDN = 0x04;

    private void WinbondFintekEnter() {

      WinRing0.WriteIoPortByte(registerPort, 0x87);

      WinRing0.WriteIoPortByte(registerPort, 0x87);

    }

    private void WinbondFintekExit() {

      WinRing0.WriteIoPortByte(registerPort, 0xAA);      

    }

    // SMSC

    private void SMSCEnter() {

      WinRing0.WriteIoPortByte(registerPort, 0x55);

    }

    private void SMSCExit() {

      WinRing0.WriteIoPortByte(registerPort, 0xAA);

    }

    public LPCGroup() {

      if (!WinRing0.IsAvailable)

        return;

      for (int i = 0; i < REGISTER_PORTS.Length; i++) {

        registerPort = REGISTER_PORTS[i];

        valuePort = VALUE_PORTS[i];

        WinbondFintekEnter();

        byte logicalDeviceNumber;

        byte id = ReadByte(CHIP_ID_REGISTER);

        byte revision = ReadByte(CHIP_REVISION_REGISTER);

        chip = Chip.Unknown;

        logicalDeviceNumber = 0;

        switch (id) {

          case 0x05:

            switch (revision) {

              case 0x07:

                chip = Chip.F71858;

                logicalDeviceNumber = F71858_HARDWARE_MONITOR_LDN;

                break;

              case 0x41:

                chip = Chip.F71882;

                logicalDeviceNumber = FINTEK_HARDWARE_MONITOR_LDN;

                break;              

            } break;

          case 0x06:

            switch (revision) {             

              case 0x01:

                chip = Chip.F71862;

                logicalDeviceNumber = FINTEK_HARDWARE_MONITOR_LDN;

                break;              

            } break;

          case 0x07:

            switch (revision) {

              case 0x23:

                chip = Chip.F71889;

                logicalDeviceNumber = FINTEK_HARDWARE_MONITOR_LDN;

                break;              

            } break;

          case 0x08:

            switch (revision) {

              case 0x14:

                chip = Chip.F71869;

                logicalDeviceNumber = FINTEK_HARDWARE_MONITOR_LDN;

                break;              

            } break;

          case 0x52:

            switch (revision) {

              case 0x17:

              case 0x3A:

              case 0x41:

                chip = Chip.W83627HF;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;             

            } break;

          case 0x82:

            switch (revision) {

              case 0x83:

                chip = Chip.W83627THF;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;

            } break;

          case 0x85:

            switch (revision) {

              case 0x41:

                chip = Chip.W83687THF;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;

            } break;

          case 0x88:

            switch (revision & 0xF0) {

              case 0x60:

                chip = Chip.W83627EHF;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;

            } break;

          case 0xA0:

            switch (revision & 0xF0) {

              case 0x20: 

                chip = Chip.W83627DHG;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;  

                break;             

            } break;

          case 0xA5:

            switch (revision & 0xF0) {

              case 0x10:

                chip = Chip.W83667HG;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;

            } break;

          case 0xB0:

            switch (revision & 0xF0) {

              case 0x70:

                chip = Chip.W83627DHGP;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;             

            } break;

          case 0xB3:

            switch (revision & 0xF0) {

              case 0x50:

                chip = Chip.W83667HGB;

                logicalDeviceNumber = WINBOND_HARDWARE_MONITOR_LDN;

                break;

            } break; 

        }

        if (chip == Chip.Unknown) {

          if (id != 0 && id != 0xff) {

            WinbondFintekExit();

            report.Append("Chip ID: Unknown Winbond / Fintek with ID 0x"); 

            report.AppendLine(((id << 8) | revision).ToString("X"));

            report.AppendLine();

          }

        } else {

          Select(logicalDeviceNumber);

          ushort address = ReadWord(BASE_ADDRESS_REGISTER);          

          Thread.Sleep(1);

          ushort verify = ReadWord(BASE_ADDRESS_REGISTER);

          ushort vendorID = FINTEK_VENDOR_ID;

          if (chip == Chip.F71858 || chip == Chip.F71862 || 

            chip == Chip.F71882 || chip == Chip.F71889)

            vendorID = ReadWord(FINTEK_VENDOR_ID_REGISTER);

          WinbondFintekExit();

          if (address != verify) {            

            report.Append("Chip ID: 0x"); 

            report.AppendLine(chip.ToString("X"));

            report.Append("Chip revision: 0x"); 

            report.AppendLine(revision.ToString("X"));

            report.AppendLine("Error: Address verification failed");

            report.AppendLine();

            return;

          }

          // some Fintek chips have address register offset 0x05 added already

          if ((address & 0x07) == 0x05)

            address &= 0xFFF8;

          if (address < 0x100 || (address & 0xF007) != 0) {            

            report.Append("Chip ID: 0x");

            report.AppendLine(chip.ToString("X"));

            report.Append("Chip revision: 0x");

            report.AppendLine(revision.ToString("X"));

            report.Append("Error: Invalid address 0x");

            report.AppendLine(address.ToString("X"));

            report.AppendLine();

            return;

          }

          switch (chip) {

            case Chip.W83627DHG:

            case Chip.W83627DHGP:

            case Chip.W83627EHF:

            case Chip.W83627HF:

            case Chip.W83627THF:

            case Chip.W83667HG:

            case Chip.W83667HGB:

            case Chip.W83687THF:

              W836XX w836XX = new W836XX(chip, revision, address);

              if (w836XX.IsAvailable)

                hardware.Add(w836XX);

              break;

            case Chip.F71858:

            case Chip.F71862:

            case Chip.F71882:

            case Chip.F71889: 

            case Chip.F71869:

              hardware.Add(new F718XX(chip, address));

              break;

            default: break;

          }

          return;

        }

        IT87Enter();

        ushort chipID = ReadWord(CHIP_ID_REGISTER);

        switch (chipID) {

          case 0x8712: chip = Chip.IT8712F; break;

          case 0x8716: chip = Chip.IT8716F; break;

          case 0x8718: chip = Chip.IT8718F; break;

          case 0x8720: chip = Chip.IT8720F; break;

          case 0x8726: chip = Chip.IT8726F; break; 

          default: chip = Chip.Unknown; break;

        }

        if (chip == Chip.Unknown) {

          if (chipID != 0 && chipID != 0xffff) {

            IT87Exit();

            report.Append("Chip ID: Unknown ITE with ID 0x");

            report.AppendLine(chipID.ToString("X"));

            report.AppendLine();

          }

        } else {

          Select(IT87_ENVIRONMENT_CONTROLLER_LDN);

          ushort address = ReadWord(BASE_ADDRESS_REGISTER);

          Thread.Sleep(1);

          ushort verify = ReadWord(BASE_ADDRESS_REGISTER);

          IT87Exit();

          if (address != verify || address < 0x100 || (address & 0xF007) != 0) {

            report.Append("Chip ID: 0x");

            report.AppendLine(chip.ToString("X"));            

            report.Append("Error: Invalid address 0x");

            report.AppendLine(address.ToString("X"));

            report.AppendLine();

            return;

          }

          IT87XX it87 = new IT87XX(chip, address);

          if (it87.IsAvailable)

            hardware.Add(it87);

          return;

        }

        SMSCEnter();

        chipID = ReadWord(CHIP_ID_REGISTER);

        switch (chipID) {

          default: chip = Chip.Unknown; break;

        }

        if (chip == Chip.Unknown) {

          if (chipID != 0 && chipID != 0xffff) {

            SMSCExit();

            report.Append("Chip ID: Unknown SMSC with ID 0x");

            report.AppendLine(chipID.ToString("X"));

            report.AppendLine();

          }

        } else {

          SMSCExit();

          return;

        }

      }   

    }

    public IHardware[] Hardware {

      get {

        return hardware.ToArray();

      }

    }

    public string GetReport() {

      if (report.Length > 0) {

        report.Insert(0, "LPCIO" + Environment.NewLine +

          Environment.NewLine);        

        return report.ToString();

      } else

        return null;

    }

    public void Close() { }

  }

}