moel@16: /*
moel@16:
moel@16: Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@16:
moel@16: The contents of this file are subject to the Mozilla Public License Version
moel@16: 1.1 (the "License"); you may not use this file except in compliance with
moel@16: the License. You may obtain a copy of the License at
moel@16:
moel@16: http://www.mozilla.org/MPL/
moel@16:
moel@16: Software distributed under the License is distributed on an "AS IS" basis,
moel@16: WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@16: for the specific language governing rights and limitations under the License.
moel@16:
moel@16: The Original Code is the Open Hardware Monitor code.
moel@16:
moel@16: The Initial Developer of the Original Code is
moel@16: Michael Möller <m.moeller@gmx.ch>.
moel@16: Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@16: the Initial Developer. All Rights Reserved.
moel@16:
moel@16: Contributor(s):
moel@16:
moel@16: Alternatively, the contents of this file may be used under the terms of
moel@16: either the GNU General Public License Version 2 or later (the "GPL"), or
moel@16: the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@16: in which case the provisions of the GPL or the LGPL are applicable instead
moel@16: of those above. If you wish to allow use of your version of this file only
moel@16: under the terms of either the GPL or the LGPL, and not to allow others to
moel@16: use your version of this file under the terms of the MPL, indicate your
moel@16: decision by deleting the provisions above and replace them with the notice
moel@16: and other provisions required by the GPL or the LGPL. If you do not delete
moel@16: the provisions above, a recipient may use your version of this file under
moel@16: the terms of any one of the MPL, the GPL or the LGPL.
moel@16:
moel@16: */
moel@16:
moel@16: using System;
moel@16: using System.Collections.Generic;
moel@16: using System.Drawing;
moel@16: using System.Text;
moel@16:
moel@16: namespace OpenHardwareMonitor.Hardware.LPC {
moel@130: public class IT87XX : ISuperIO {
moel@130:
moel@16: private ushort address;
moel@130: private Chip chip;
moel@145: private byte version;
moel@16:
moel@78: private readonly ushort addressReg;
moel@78: private readonly ushort dataReg;
moel@78:
moel@130: private float?[] voltages = new float?[0];
moel@130: private float?[] temperatures = new float?[0];
moel@130: private float?[] fans = new float?[0];
moel@16:
moel@16: // Consts
moel@16: private const byte ITE_VENDOR_ID = 0x90;
moel@16:
moel@16: // Environment Controller
moel@16: private const byte ADDRESS_REGISTER_OFFSET = 0x05;
moel@16: private const byte DATA_REGISTER_OFFSET = 0x06;
moel@16:
moel@16: // Environment Controller Registers
moel@16: private const byte CONFIGURATION_REGISTER = 0x00;
moel@16: private const byte TEMPERATURE_BASE_REG = 0x29;
moel@16: private const byte VENDOR_ID_REGISTER = 0x58;
moel@16: private const byte FAN_TACHOMETER_16_BIT_ENABLE_REGISTER = 0x0c;
moel@16: private byte[] FAN_TACHOMETER_REG =
moel@16: new byte[] { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
moel@16: private byte[] FAN_TACHOMETER_EXT_REG =
moel@16: new byte[] { 0x18, 0x19, 0x1a, 0x81, 0x83 };
moel@78: private const byte VOLTAGE_BASE_REG = 0x20;
moel@78:
moel@78: private byte ReadByte(byte register, out bool valid) {
moel@78: WinRing0.WriteIoPortByte(addressReg, register);
moel@78: byte value = WinRing0.ReadIoPortByte(dataReg);
moel@78: valid = register == WinRing0.ReadIoPortByte(addressReg);
moel@78: return value;
moel@144: }
moel@16:
moel@145: public IT87XX(Chip chip, ushort address, byte version) {
moel@16:
moel@16: this.address = address;
moel@130: this.chip = chip;
moel@145: this.version = version;
moel@78: this.addressReg = (ushort)(address + ADDRESS_REGISTER_OFFSET);
moel@78: this.dataReg = (ushort)(address + DATA_REGISTER_OFFSET);
moel@16:
moel@16: // Check vendor id
moel@78: bool valid;
moel@78: byte vendorId = ReadByte(VENDOR_ID_REGISTER, out valid);
moel@78: if (!valid || vendorId != ITE_VENDOR_ID)
moel@16: return;
moel@16:
moel@16: // Bit 0x10 of the configuration register should always be 1
moel@78: if ((ReadByte(CONFIGURATION_REGISTER, out valid) & 0x10) == 0)
moel@78: return;
moel@78: if (!valid)
moel@16: return;
moel@16:
moel@130: voltages = new float?[9];
moel@130: temperatures = new float?[3];
moel@130: fans = new float?[5];
moel@16: }
moel@16:
moel@130: public Chip Chip { get { return chip; } }
moel@130: public float?[] Voltages { get { return voltages; } }
moel@130: public float?[] Temperatures { get { return temperatures; } }
moel@130: public float?[] Fans { get { return fans; } }
moel@16:
moel@130: public string GetReport() {
moel@16: StringBuilder r = new StringBuilder();
moel@16:
moel@31: r.AppendLine("LPC " + this.GetType().Name);
moel@16: r.AppendLine();
moel@16: r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
moel@145: r.Append("Chip Version: 0x"); r.AppendLine(version.ToString("X"));
moel@16: r.Append("Base Address: 0x"); r.AppendLine(address.ToString("X4"));
moel@16: r.AppendLine();
moel@16: r.AppendLine("Environment Controller Registers");
moel@16: r.AppendLine();
moel@16:
moel@16: r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
moel@16: r.AppendLine();
moel@16: for (int i = 0; i <= 0xA; i++) {
moel@16: r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append(" ");
moel@16: for (int j = 0; j <= 0xF; j++) {
moel@16: r.Append(" ");
moel@78: bool valid;
moel@78: byte value = ReadByte((byte)((i << 4) | j), out valid);
moel@78: if (valid)
moel@78: r.Append(value.ToString("X2"));
moel@78: else
moel@78: r.Append("??");
moel@16: }
moel@16: r.AppendLine();
moel@16: }
moel@16: r.AppendLine();
moel@16:
moel@16: return r.ToString();
moel@16: }
moel@16:
moel@130: public void Update() {
moel@16:
moel@130: for (int i = 0; i < voltages.Length; i++) {
moel@78: bool valid;
moel@126: float value = 0.001f * ((int)ReadByte(
moel@130: (byte)(VOLTAGE_BASE_REG + i), out valid) << 4);
moel@130: if (!valid)
moel@130: continue;
moel@130: if (value > 0)
moel@130: voltages[i] = value;
moel@130: else
moel@130: voltages[i] = null;
moel@130: }
moel@130:
moel@130: for (int i = 0; i < temperatures.Length; i++) {
moel@130: bool valid;
moel@130: sbyte value = (sbyte)ReadByte(
moel@130: (byte)(TEMPERATURE_BASE_REG + i), out valid);
moel@78: if (!valid)
moel@78: continue;
moel@78:
moel@130: if (value < sbyte.MaxValue && value > 0)
moel@130: temperatures[i] = value;
moel@130: else
moel@130: temperatures[i] = null;
moel@16: }
moel@16:
moel@130: for (int i = 0; i < fans.Length; i++) {
moel@78: bool valid;
moel@130: int value = ReadByte(FAN_TACHOMETER_REG[i], out valid);
moel@78: if (!valid)
moel@78: continue;
moel@130: value |= ReadByte(FAN_TACHOMETER_EXT_REG[i], out valid) << 8;
moel@78: if (!valid)
moel@78: continue;
moel@16:
moel@36: if (value > 0x3f) {
moel@130: fans[i] = (value < 0xffff) ? 1.35e6f / ((value) * 2) : 0;
moel@16: } else {
moel@130: fans[i] = null;
moel@16: }
moel@16: }
moel@126: }
moel@130: }
moel@16: }