moel@135: /*
moel@130:
moel@344: This Source Code Form is subject to the terms of the Mozilla Public
moel@344: License, v. 2.0. If a copy of the MPL was not distributed with this
moel@344: file, You can obtain one at http://mozilla.org/MPL/2.0/.
moel@130:
moel@344: Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>
moel@344:
moel@130: */
moel@130:
moel@228: using System;
moel@130: using System.Collections.Generic;
moel@166: using System.Globalization;
moel@228: using System.Threading;
moel@130: using OpenHardwareMonitor.Hardware.LPC;
moel@130:
moel@130: namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165: internal class SuperIOHardware : Hardware {
moel@130:
moel@195: private readonly Mainboard mainboard;
moel@195: private readonly ISuperIO superIO;
moel@130:
moel@195: private readonly List<Sensor> voltages = new List<Sensor>();
moel@195: private readonly List<Sensor> temperatures = new List<Sensor>();
moel@195: private readonly List<Sensor> fans = new List<Sensor>();
moel@323: private readonly List<Sensor> controls = new List<Sensor>();
moel@167:
moel@228: private delegate float? ReadValueDelegate(int index);
moel@228: private delegate void UpdateDelegate();
moel@228:
moel@228: // delegates for mainboard specific sensor reading code
moel@228: private readonly ReadValueDelegate readVoltage;
moel@228: private readonly ReadValueDelegate readTemperature;
moel@228: private readonly ReadValueDelegate readFan;
moel@323: private readonly ReadValueDelegate readControl;
moel@228:
moel@228: // delegate for post update mainboard specific code
moel@228: private readonly UpdateDelegate postUpdate;
moel@228:
moel@228: // mainboard specific mutex
moel@228: private readonly Mutex mutex;
moel@228:
moel@176: public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176: Manufacturer manufacturer, Model model, ISettings settings)
moel@275: : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",
moel@275: superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),
moel@275: settings)
moel@130: {
moel@176: this.mainboard = mainboard;
moel@130: this.superIO = superIO;
moel@130:
moel@228: this.readVoltage = (index) => superIO.Voltages[index];
moel@228: this.readTemperature = (index) => superIO.Temperatures[index];
moel@228: this.readFan = (index) => superIO.Fans[index];
moel@323: this.readControl = (index) => superIO.Controls[index];
moel@228:
moel@228: this.postUpdate = () => { };
moel@228:
moel@130: List<Voltage> v = new List<Voltage>();
moel@130: List<Temperature> t = new List<Temperature>();
moel@130: List<Fan> f = new List<Fan>();
moel@323: List<Ctrl> c = new List<Ctrl>();
moel@130:
moel@130: switch (superIO.Chip) {
moel@353: case Chip.IT8705F:
moel@130: case Chip.IT8712F:
moel@130: case Chip.IT8716F:
moel@130: case Chip.IT8718F:
moel@177: case Chip.IT8720F:
moel@319: case Chip.IT8726F:
moel@130: switch (manufacturer) {
moel@133: case Manufacturer.ASUS:
moel@133: switch (model) {
moel@168: case Model.Crosshair_III_Formula: // IT8720F
moel@133: v.Add(new Voltage("VBat", 8));
moel@133: t.Add(new Temperature("CPU", 0));
moel@133: for (int i = 0; i < superIO.Fans.Length; i++)
moel@133: f.Add(new Fan("Fan #" + (i + 1), i));
moel@133: break;
moel@144: case Model.M2N_SLI_DELUXE:
moel@133: v.Add(new Voltage("CPU VCore", 0));
moel@133: v.Add(new Voltage("+3.3V", 1));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195: v.Add(new Voltage("+12V", 4, 30, 10));
moel@195: v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@133: v.Add(new Voltage("VBat", 8));
moel@133: t.Add(new Temperature("CPU", 0));
moel@133: t.Add(new Temperature("Motherboard", 1));
moel@133: f.Add(new Fan("CPU Fan", 0));
moel@133: f.Add(new Fan("Chassis Fan #1", 1));
moel@133: f.Add(new Fan("Power Fan", 2));
moel@133: break;
moel@168: case Model.M4A79XTD_EVO: // IT8720F
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@144: v.Add(new Voltage("VBat", 8));
moel@144: t.Add(new Temperature("CPU", 0));
moel@144: t.Add(new Temperature("Motherboard", 1));
moel@144: f.Add(new Fan("CPU Fan", 0));
moel@144: f.Add(new Fan("Chassis Fan #1", 1));
moel@144: f.Add(new Fan("Chassis Fan #2", 2));
moel@144: break;
moel@133: default:
moel@133: v.Add(new Voltage("CPU VCore", 0));
moel@133: v.Add(new Voltage("Voltage #2", 1, true));
moel@133: v.Add(new Voltage("Voltage #3", 2, true));
moel@133: v.Add(new Voltage("Voltage #4", 3, true));
moel@133: v.Add(new Voltage("Voltage #5", 4, true));
moel@133: v.Add(new Voltage("Voltage #6", 5, true));
moel@133: v.Add(new Voltage("Voltage #7", 6, true));
moel@133: v.Add(new Voltage("Voltage #8", 7, true));
moel@133: v.Add(new Voltage("VBat", 8));
moel@133: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133: for (int i = 0; i < superIO.Fans.Length; i++)
moel@133: f.Add(new Fan("Fan #" + (i + 1), i));
moel@133: break;
moel@133: }
moel@133: break;
moel@221:
moel@221: case Manufacturer.ASRock:
moel@221: switch (model) {
moel@221: case Model.P55_Deluxe: // IT8720F
moel@228:
moel@221: v.Add(new Voltage("CPU VCore", 0));
moel@221: v.Add(new Voltage("+3.3V", 2));
moel@221: v.Add(new Voltage("+12V", 4, 30, 10));
moel@221: v.Add(new Voltage("+5V", 5, 6.8f, 10));
moel@221: v.Add(new Voltage("VBat", 8));
moel@221: t.Add(new Temperature("CPU", 0));
moel@221: t.Add(new Temperature("Motherboard", 1));
moel@221: f.Add(new Fan("CPU Fan", 0));
moel@221: f.Add(new Fan("Chassis Fan #1", 1));
moel@228:
moel@228: // this mutex is also used by the official ASRock tool
moel@228: mutex = new Mutex(false, "ASRockOCMark");
moel@228:
moel@228: bool exclusiveAccess = false;
moel@228: try {
moel@228: exclusiveAccess = mutex.WaitOne(10, false);
moel@228: } catch (AbandonedMutexException) { }
moel@228: catch (InvalidOperationException) { }
moel@228:
moel@228: // only read additional fans if we get exclusive access
moel@228: if (exclusiveAccess) {
moel@228:
moel@228: f.Add(new Fan("Chassis Fan #2", 2));
moel@228: f.Add(new Fan("Chassis Fan #3", 3));
moel@228: f.Add(new Fan("Power Fan", 4));
moel@228:
moel@228: readFan = (index) => {
moel@228: if (index < 2) {
moel@228: return superIO.Fans[index];
moel@228: } else {
moel@228: // get GPIO 80-87
moel@228: byte? gpio = superIO.ReadGPIO(7);
moel@228: if (!gpio.HasValue)
moel@228: return null;
moel@228:
moel@228: // read the last 3 fans based on GPIO 83-85
moel@228: int[] masks = { 0x05, 0x03, 0x06 };
moel@228: return (((gpio.Value >> 3) & 0x07) ==
moel@228: masks[index - 2]) ? superIO.Fans[2] : null;
moel@228: }
moel@228: };
moel@228:
moel@228: int fanIndex = 0;
moel@228: postUpdate = () => {
moel@228: // get GPIO 80-87
moel@228: byte? gpio = superIO.ReadGPIO(7);
moel@228: if (!gpio.HasValue)
moel@228: return;
moel@228:
moel@228: // prepare the GPIO 83-85 for the next update
moel@228: int[] masks = { 0x05, 0x03, 0x06 };
moel@228: superIO.WriteGPIO(7,
moel@228: (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));
moel@228: fanIndex = (fanIndex + 1) % 3;
moel@228: };
moel@228: }
moel@228:
moel@221: break;
moel@221: default:
moel@221: v.Add(new Voltage("CPU VCore", 0));
moel@221: v.Add(new Voltage("Voltage #2", 1, true));
moel@221: v.Add(new Voltage("Voltage #3", 2, true));
moel@221: v.Add(new Voltage("Voltage #4", 3, true));
moel@221: v.Add(new Voltage("Voltage #5", 4, true));
moel@221: v.Add(new Voltage("Voltage #6", 5, true));
moel@221: v.Add(new Voltage("Voltage #7", 6, true));
moel@221: v.Add(new Voltage("Voltage #8", 7, true));
moel@221: v.Add(new Voltage("VBat", 8));
moel@221: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@221: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@221: for (int i = 0; i < superIO.Fans.Length; i++)
moel@221: f.Add(new Fan("Fan #" + (i + 1), i));
moel@221: break;
moel@221: };
moel@221: break;
moel@221:
moel@130: case Manufacturer.DFI:
moel@130: switch (model) {
moel@168: case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("FSB VTT", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195: v.Add(new Voltage("+12V", 4, 30, 10));
moel@130: v.Add(new Voltage("NB Core", 5));
moel@130: v.Add(new Voltage("VDIMM", 6));
moel@195: v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("CPU", 0));
moel@130: t.Add(new Temperature("System", 1));
moel@130: t.Add(new Temperature("Chipset", 2));
moel@130: f.Add(new Fan("Fan #1", 0));
moel@130: f.Add(new Fan("Fan #2", 1));
moel@130: f.Add(new Fan("Fan #3", 2));
moel@130: break;
moel@168: case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("VTT", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@195: v.Add(new Voltage("+12V", 4, 30, 10));
moel@130: v.Add(new Voltage("CPU PLL", 5));
moel@130: v.Add(new Voltage("DRAM", 6));
moel@195: v.Add(new Voltage("+5VSB", 7, 6.8f, 10));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("Chipset", 0));
moel@130: t.Add(new Temperature("CPU PWM", 1));
moel@130: t.Add(new Temperature("CPU", 2));
moel@130: f.Add(new Fan("Fan #1", 0));
moel@130: f.Add(new Fan("Fan #2", 1));
moel@130: f.Add(new Fan("Fan #3", 2));
moel@130: break;
moel@130: default:
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("VTT", 1, true));
moel@130: v.Add(new Voltage("+3.3V", 2, true));
moel@130: v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130: v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130: v.Add(new Voltage("Voltage #6", 5, true));
moel@130: v.Add(new Voltage("DRAM", 6, true));
moel@130: v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130: for (int i = 0; i < superIO.Fans.Length; i++)
moel@130: f.Add(new Fan("Fan #" + (i + 1), i));
moel@130: break;
moel@130: }
moel@130: break;
moel@130:
moel@130: case Manufacturer.Gigabyte:
moel@130: switch (model) {
moel@168: case Model._965P_S3: // IT8718F
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("DRAM", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("System", 0));
moel@130: t.Add(new Temperature("CPU", 1));
moel@130: f.Add(new Fan("CPU Fan", 0));
moel@130: f.Add(new Fan("System Fan", 1));
moel@130: break;
moel@168: case Model.EP45_DS3R: // IT8718F
moel@130: case Model.EP45_UD3R:
moel@138: case Model.X38_DS5:
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("DRAM", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("System", 0));
moel@130: t.Add(new Temperature("CPU", 1));
moel@130: f.Add(new Fan("CPU Fan", 0));
moel@130: f.Add(new Fan("System Fan #2", 1));
moel@130: f.Add(new Fan("Power Fan", 2));
moel@130: f.Add(new Fan("System Fan #1", 3));
moel@130: break;
moel@357: case Model.EX58_EXTREME: // IT8720F
moel@133: v.Add(new Voltage("CPU VCore", 0));
moel@133: v.Add(new Voltage("DRAM", 1));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@133: v.Add(new Voltage("VBat", 8));
moel@133: t.Add(new Temperature("System", 0));
moel@133: t.Add(new Temperature("CPU", 1));
moel@138: t.Add(new Temperature("Northbridge", 2));
moel@133: f.Add(new Fan("CPU Fan", 0));
moel@133: f.Add(new Fan("System Fan #2", 1));
moel@133: f.Add(new Fan("Power Fan", 2));
moel@133: f.Add(new Fan("System Fan #1", 3));
moel@133: break;
moel@168: case Model.P35_DS3: // IT8718F
moel@168: case Model.P35_DS3L: // IT8718F
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("DRAM", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("System", 0));
moel@130: t.Add(new Temperature("CPU", 1));
moel@130: f.Add(new Fan("CPU Fan", 0));
moel@130: f.Add(new Fan("System Fan #1", 1));
moel@130: f.Add(new Fan("System Fan #2", 2));
moel@130: f.Add(new Fan("Power Fan", 3));
moel@130: break;
moel@168: case Model.P55_UD4: // IT8720F
moel@357: case Model.P55A_UD3: // IT8720F
moel@357: case Model.P55M_UD4: // IT8720F
moel@357: case Model.H55_USB3: // IT8720F
moel@357: case Model.EX58_UD3R: // IT8720F
moel@148: v.Add(new Voltage("CPU VCore", 0));
moel@148: v.Add(new Voltage("DRAM", 1));
moel@148: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@148: v.Add(new Voltage("VBat", 8));
moel@148: t.Add(new Temperature("System", 0));
moel@148: t.Add(new Temperature("CPU", 2));
moel@148: f.Add(new Fan("CPU Fan", 0));
moel@148: f.Add(new Fan("System Fan #2", 1));
moel@148: f.Add(new Fan("Power Fan", 2));
moel@148: f.Add(new Fan("System Fan #1", 3));
moel@148: break;
moel@357: case Model.H55N_USB3: // IT8720F
moel@154: v.Add(new Voltage("CPU VCore", 0));
moel@154: v.Add(new Voltage("DRAM", 1));
moel@154: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@357: v.Add(new Voltage("VBat", 8));
moel@357: t.Add(new Temperature("System", 0));
moel@357: t.Add(new Temperature("CPU", 2));
moel@357: f.Add(new Fan("CPU Fan", 0));
moel@357: f.Add(new Fan("System Fan", 1));
moel@357: break;
moel@357: case Model.G41M_Combo: // IT8718F
moel@357: case Model.G41MT_S2: // IT8718F
moel@357: case Model.G41MT_S2P: // IT8718F
moel@357: v.Add(new Voltage("CPU VCore", 0));
moel@357: v.Add(new Voltage("DRAM", 1));
moel@357: v.Add(new Voltage("+3.3V", 2));
moel@357: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));
moel@357: v.Add(new Voltage("VBat", 8));
moel@357: t.Add(new Temperature("CPU", 2));
moel@357: f.Add(new Fan("CPU Fan", 0));
moel@357: f.Add(new Fan("System Fan", 1));
moel@357: break;
moel@357: case Model.GA_MA770T_UD3: // IT8720F
moel@359: case Model.GA_MA770T_UD3P: // IT8720F
moel@357: case Model.GA_MA790X_UD3P: // IT8720F
moel@357: v.Add(new Voltage("CPU VCore", 0));
moel@357: v.Add(new Voltage("DRAM", 1));
moel@357: v.Add(new Voltage("+3.3V", 2));
moel@357: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@154: v.Add(new Voltage("VBat", 8));
moel@154: t.Add(new Temperature("System", 0));
moel@154: t.Add(new Temperature("CPU", 1));
moel@154: f.Add(new Fan("CPU Fan", 0));
moel@154: f.Add(new Fan("System Fan #1", 1));
moel@154: f.Add(new Fan("System Fan #2", 2));
moel@154: f.Add(new Fan("Power Fan", 3));
moel@154: break;
moel@359: case Model.GA_MA78LM_S2H: // IT8718F
moel@359: v.Add(new Voltage("CPU VCore", 0));
moel@359: v.Add(new Voltage("DRAM", 1));
moel@359: v.Add(new Voltage("+3.3V", 2));
moel@359: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@359: v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@359: v.Add(new Voltage("VBat", 8));
moel@359: t.Add(new Temperature("System", 0));
moel@359: t.Add(new Temperature("CPU", 1));
moel@359: t.Add(new Temperature("VRM", 2));
moel@359: f.Add(new Fan("CPU Fan", 0));
moel@359: f.Add(new Fan("System Fan #1", 1));
moel@359: f.Add(new Fan("System Fan #2", 2));
moel@359: f.Add(new Fan("Power Fan", 3));
moel@359: break;
moel@357: case Model.GA_MA785GM_US2H: // IT8718F
moel@168: case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("DRAM", 1));
moel@130: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: t.Add(new Temperature("System", 0));
moel@130: t.Add(new Temperature("CPU", 1));
moel@130: f.Add(new Fan("CPU Fan", 0));
moel@130: f.Add(new Fan("System Fan", 1));
moel@130: f.Add(new Fan("NB Fan", 2));
moel@130: break;
moel@168: case Model.X58A_UD3R: // IT8720F
moel@138: v.Add(new Voltage("CPU VCore", 0));
moel@138: v.Add(new Voltage("DRAM", 1));
moel@138: v.Add(new Voltage("+3.3V", 2));
moel@195: v.Add(new Voltage("+5V", 3, 6.8f, 10));
moel@357: v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));
moel@138: v.Add(new Voltage("VBat", 8));
moel@138: t.Add(new Temperature("System", 0));
moel@138: t.Add(new Temperature("CPU", 1));
moel@138: t.Add(new Temperature("Northbridge", 2));
moel@138: f.Add(new Fan("CPU Fan", 0));
moel@138: f.Add(new Fan("System Fan #2", 1));
moel@138: f.Add(new Fan("Power Fan", 2));
moel@138: f.Add(new Fan("System Fan #1", 3));
moel@138: break;
moel@130: default:
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("DRAM", 1, true));
moel@130: v.Add(new Voltage("+3.3V", 2, true));
moel@130: v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130: v.Add(new Voltage("Voltage #5", 4, true));
moel@130: v.Add(new Voltage("Voltage #6", 5, true));
moel@130: v.Add(new Voltage("Voltage #7", 6, true));
moel@257: v.Add(new Voltage("Voltage #8", 7, true));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130: for (int i = 0; i < superIO.Fans.Length; i++)
moel@130: f.Add(new Fan("Fan #" + (i + 1), i));
moel@130: break;
moel@130: }
moel@130: break;
moel@130:
moel@130: default:
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("Voltage #2", 1, true));
moel@130: v.Add(new Voltage("Voltage #3", 2, true));
moel@130: v.Add(new Voltage("Voltage #4", 3, true));
moel@130: v.Add(new Voltage("Voltage #5", 4, true));
moel@130: v.Add(new Voltage("Voltage #6", 5, true));
moel@130: v.Add(new Voltage("Voltage #7", 6, true));
moel@130: v.Add(new Voltage("Voltage #8", 7, true));
moel@130: v.Add(new Voltage("VBat", 8));
moel@130: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130: for (int i = 0; i < superIO.Fans.Length; i++)
moel@130: f.Add(new Fan("Fan #" + (i + 1), i));
moel@130: break;
moel@130: }
moel@130: break;
moel@170:
moel@170: case Chip.IT8721F:
moel@277: case Chip.IT8728F:
moel@341: case Chip.IT8771E:
moel@319: case Chip.IT8772E:
moel@177: switch (manufacturer) {
moel@177: case Manufacturer.ECS:
moel@177: switch (model) {
moel@177: case Model.A890GXM_A: // IT8721F
moel@177: v.Add(new Voltage("CPU VCore", 0));
moel@177: v.Add(new Voltage("VDIMM", 1));
moel@177: v.Add(new Voltage("NB Voltage", 2));
moel@195: v.Add(new Voltage("Analog +3.3V", 3, 10, 10));
moel@177: // v.Add(new Voltage("VDIMM", 6, true));
moel@195: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@195: v.Add(new Voltage("VBat", 8, 10, 10));
moel@177: t.Add(new Temperature("CPU", 0));
moel@177: t.Add(new Temperature("System", 1));
moel@177: t.Add(new Temperature("Northbridge", 2));
moel@177: f.Add(new Fan("CPU Fan", 0));
moel@177: f.Add(new Fan("System Fan", 1));
moel@177: f.Add(new Fan("Power Fan", 2));
moel@177: break;
moel@177: default:
moel@177: v.Add(new Voltage("Voltage #1", 0, true));
moel@177: v.Add(new Voltage("Voltage #2", 1, true));
moel@177: v.Add(new Voltage("Voltage #3", 2, true));
moel@177: v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177: v.Add(new Voltage("Voltage #5", 4, true));
moel@177: v.Add(new Voltage("Voltage #6", 5, true));
moel@177: v.Add(new Voltage("Voltage #7", 6, true));
moel@177: v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195: v.Add(new Voltage("VBat", 8, 10, 10));
moel@177: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177: for (int i = 0; i < superIO.Fans.Length; i++)
moel@177: f.Add(new Fan("Fan #" + (i + 1), i));
moel@177: break;
moel@177: }
moel@177: break;
moel@278: case Manufacturer.Gigabyte:
moel@278: switch (model) {
moel@357: case Model.H61M_DS2_REV_1_2: // IT8728F
moel@357: case Model.H61M_USB3_B3_REV_2_0: // IT8728F
moel@357: v.Add(new Voltage("VTT", 0));
moel@357: v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@278: v.Add(new Voltage("CPU VCore", 5));
moel@278: v.Add(new Voltage("DRAM", 6));
moel@278: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@278: v.Add(new Voltage("VBat", 8, 10, 10));
moel@278: t.Add(new Temperature("System", 0));
moel@278: t.Add(new Temperature("CPU", 2));
moel@278: f.Add(new Fan("CPU Fan", 0));
moel@357: f.Add(new Fan("System Fan", 1));
moel@278: break;
moel@290: case Model.H67A_UD3H_B3: // IT8728F
moel@357: case Model.H67A_USB3_B3: // IT8728F
moel@290: v.Add(new Voltage("VTT", 0));
moel@290: v.Add(new Voltage("+5V", 1, 15, 10));
moel@357: v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@290: v.Add(new Voltage("CPU VCore", 5));
moel@290: v.Add(new Voltage("DRAM", 6));
moel@290: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@290: v.Add(new Voltage("VBat", 8, 10, 10));
moel@290: t.Add(new Temperature("System", 0));
moel@290: t.Add(new Temperature("CPU", 2));
moel@290: f.Add(new Fan("CPU Fan", 0));
moel@290: f.Add(new Fan("System Fan #1", 1));
moel@290: f.Add(new Fan("Power Fan", 2));
moel@290: f.Add(new Fan("System Fan #2", 3));
moel@290: break;
moel@357: case Model.Z68A_D3H_B3: // IT8728F
moel@357: v.Add(new Voltage("VTT", 0));
moel@357: v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357: v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357: v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357: v.Add(new Voltage("CPU VCore", 5));
moel@357: v.Add(new Voltage("DRAM", 6));
moel@357: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357: v.Add(new Voltage("VBat", 8, 10, 10));
moel@357: t.Add(new Temperature("System", 0));
moel@357: t.Add(new Temperature("CPU", 2));
moel@357: f.Add(new Fan("CPU Fan", 0));
moel@357: f.Add(new Fan("System Fan #1", 1));
moel@357: f.Add(new Fan("Power Fan", 2));
moel@357: f.Add(new Fan("System Fan #2", 3));
moel@357: break;
moel@357: case Model.P67A_UD3_B3: // IT8728F
moel@357: case Model.P67A_UD3R_B3: // IT8728F
moel@357: case Model.P67A_UD4_B3: // IT8728F
moel@357: case Model.Z68AP_D3: // IT8728F
moel@357: case Model.Z68X_UD3H_B3: // IT8728F
moel@357: v.Add(new Voltage("VTT", 0));
moel@357: v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357: v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357: v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@357: v.Add(new Voltage("CPU VCore", 5));
moel@357: v.Add(new Voltage("DRAM", 6));
moel@357: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@357: v.Add(new Voltage("VBat", 8, 10, 10));
moel@357: t.Add(new Temperature("System", 0));
moel@357: t.Add(new Temperature("CPU", 2));
moel@357: f.Add(new Fan("CPU Fan", 0));
moel@357: f.Add(new Fan("System Fan #2", 1));
moel@357: f.Add(new Fan("Power Fan", 2));
moel@357: f.Add(new Fan("System Fan #1", 3));
moel@357: break;
moel@305: case Model.Z68X_UD7_B3: // IT8728F
moel@305: v.Add(new Voltage("VTT", 0));
moel@357: v.Add(new Voltage("+3.3V", 1, 6.49f, 10));
moel@357: v.Add(new Voltage("+12V", 2, 30.9f, 10));
moel@357: v.Add(new Voltage("+5V", 3, 7.15f, 10));
moel@305: v.Add(new Voltage("CPU VCore", 5));
moel@305: v.Add(new Voltage("DRAM", 6));
moel@305: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@305: v.Add(new Voltage("VBat", 8, 10, 10));
moel@305: t.Add(new Temperature("System", 0));
moel@305: t.Add(new Temperature("CPU", 1));
moel@305: t.Add(new Temperature("System 3", 2));
moel@305: f.Add(new Fan("CPU Fan", 0));
moel@305: f.Add(new Fan("Power Fan", 1));
moel@305: f.Add(new Fan("System Fan #1", 2));
moel@305: f.Add(new Fan("System Fan #2", 3));
moel@305: f.Add(new Fan("System Fan #3", 4));
moel@305: break;
moel@278: default:
moel@278: v.Add(new Voltage("Voltage #1", 0, true));
moel@278: v.Add(new Voltage("Voltage #2", 1, true));
moel@278: v.Add(new Voltage("Voltage #3", 2, true));
moel@278: v.Add(new Voltage("Voltage #4", 3, true));
moel@278: v.Add(new Voltage("Voltage #5", 4, true));
moel@278: v.Add(new Voltage("Voltage #6", 5, true));
moel@278: v.Add(new Voltage("Voltage #7", 6, true));
moel@278: v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@278: v.Add(new Voltage("VBat", 8, 10, 10));
moel@278: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@278: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@278: for (int i = 0; i < superIO.Fans.Length; i++)
moel@278: f.Add(new Fan("Fan #" + (i + 1), i));
moel@278: break;
moel@278: }
moel@278: break;
moel@320: case Manufacturer.Shuttle:
moel@320: switch (model) {
moel@320: case Model.FH67: // IT8772E
moel@320: v.Add(new Voltage("CPU VCore", 0));
moel@320: v.Add(new Voltage("DRAM", 1));
moel@320: v.Add(new Voltage("PCH VCCIO", 2));
moel@320: v.Add(new Voltage("CPU VCCIO", 3));
moel@320: v.Add(new Voltage("Graphic Voltage", 4));
moel@320: v.Add(new Voltage("Standby +3.3V", 7, 10, 10));
moel@320: v.Add(new Voltage("VBat", 8, 10, 10));
moel@320: t.Add(new Temperature("System", 0));
moel@320: t.Add(new Temperature("CPU", 1));
moel@320: f.Add(new Fan("Fan #1", 0));
moel@320: f.Add(new Fan("CPU Fan", 1));
moel@320: break;
moel@320: default:
moel@320: v.Add(new Voltage("Voltage #1", 0, true));
moel@320: v.Add(new Voltage("Voltage #2", 1, true));
moel@320: v.Add(new Voltage("Voltage #3", 2, true));
moel@320: v.Add(new Voltage("Voltage #4", 3, true));
moel@320: v.Add(new Voltage("Voltage #5", 4, true));
moel@320: v.Add(new Voltage("Voltage #6", 5, true));
moel@320: v.Add(new Voltage("Voltage #7", 6, true));
moel@320: v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@320: v.Add(new Voltage("VBat", 8, 10, 10));
moel@320: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@320: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@320: for (int i = 0; i < superIO.Fans.Length; i++)
moel@320: f.Add(new Fan("Fan #" + (i + 1), i));
moel@320: break;
moel@320: }
moel@320: break;
moel@177: default:
moel@177: v.Add(new Voltage("Voltage #1", 0, true));
moel@177: v.Add(new Voltage("Voltage #2", 1, true));
moel@177: v.Add(new Voltage("Voltage #3", 2, true));
moel@277: v.Add(new Voltage("Voltage #4", 3, true));
moel@177: v.Add(new Voltage("Voltage #5", 4, true));
moel@177: v.Add(new Voltage("Voltage #6", 5, true));
moel@177: v.Add(new Voltage("Voltage #7", 6, true));
moel@177: v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@195: v.Add(new Voltage("VBat", 8, 10, 10));
moel@177: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177: for (int i = 0; i < superIO.Fans.Length; i++)
moel@177: f.Add(new Fan("Fan #" + (i + 1), i));
moel@177: break;
moel@177: }
moel@170: break;
moel@130:
moel@130: case Chip.F71858:
moel@195: v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195: v.Add(new Voltage("VSB3V", 1, 150, 150));
moel@195: v.Add(new Voltage("Battery", 2, 150, 150));
moel@130: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130: for (int i = 0; i < superIO.Fans.Length; i++)
moel@130: f.Add(new Fan("Fan #" + (i + 1), i));
moel@130: break;
moel@130: case Chip.F71862:
moel@130: case Chip.F71869:
moel@130: case Chip.F71882:
moel@296: case Chip.F71889AD:
moel@130: case Chip.F71889ED:
moel@130: case Chip.F71889F:
moel@352: case Chip.F71808E:
moel@132: switch (manufacturer) {
moel@132: case Manufacturer.EVGA:
moel@132: switch (model) {
moel@168: case Model.X58_SLI_Classified: // F71882
moel@195: v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@195: v.Add(new Voltage("CPU VCore", 1, 47, 100));
moel@195: v.Add(new Voltage("DIMM", 2, 47, 100));
moel@195: v.Add(new Voltage("CPU VTT", 3, 24, 100));
moel@195: v.Add(new Voltage("IOH Vcore", 4, 24, 100));
moel@195: v.Add(new Voltage("+5V", 5, 51, 12));
moel@195: v.Add(new Voltage("+12V", 6, 56, 6.8f));
moel@195: v.Add(new Voltage("3VSB", 7, 150, 150));
moel@195: v.Add(new Voltage("VBat", 8, 150, 150));
moel@132: t.Add(new Temperature("CPU", 0));
moel@132: t.Add(new Temperature("VREG", 1));
moel@132: t.Add(new Temperature("System", 2));
moel@132: f.Add(new Fan("CPU Fan", 0));
moel@132: f.Add(new Fan("Power Fan", 1));
moel@132: f.Add(new Fan("Chassis Fan", 2));
moel@132: break;
moel@132: default:
moel@195: v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132: v.Add(new Voltage("CPU VCore", 1));
moel@132: v.Add(new Voltage("Voltage #3", 2, true));
moel@132: v.Add(new Voltage("Voltage #4", 3, true));
moel@132: v.Add(new Voltage("Voltage #5", 4, true));
moel@132: v.Add(new Voltage("Voltage #6", 5, true));
moel@132: v.Add(new Voltage("Voltage #7", 6, true));
moel@195: v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195: v.Add(new Voltage("VBat", 8, 150, 150));
moel@132: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132: for (int i = 0; i < superIO.Fans.Length; i++)
moel@132: f.Add(new Fan("Fan #" + (i + 1), i));
moel@132: break;
moel@132: }
moel@132: break;
moel@132: default:
moel@195: v.Add(new Voltage("VCC3V", 0, 150, 150));
moel@132: v.Add(new Voltage("CPU VCore", 1));
moel@132: v.Add(new Voltage("Voltage #3", 2, true));
moel@132: v.Add(new Voltage("Voltage #4", 3, true));
moel@132: v.Add(new Voltage("Voltage #5", 4, true));
moel@132: v.Add(new Voltage("Voltage #6", 5, true));
moel@352: if (superIO.Chip != Chip.F71808E)
moel@352: v.Add(new Voltage("Voltage #7", 6, true));
moel@195: v.Add(new Voltage("VSB3V", 7, 150, 150));
moel@195: v.Add(new Voltage("VBat", 8, 150, 150));
moel@132: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132: for (int i = 0; i < superIO.Fans.Length; i++)
moel@132: f.Add(new Fan("Fan #" + (i + 1), i));
moel@132: break;
moel@132: }
moel@130: break;
moel@130:
moel@220: case Chip.W83627EHF:
moel@220: switch (manufacturer) {
moel@220: case Manufacturer.ASRock:
moel@220: switch (model) {
moel@220: case Model.AOD790GX_128M: // W83627EHF
moel@220: v.Add(new Voltage("CPU VCore", 0));
moel@220: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@220: v.Add(new Voltage("+3.3V", 4, 10, 10));
moel@220: v.Add(new Voltage("+5V", 5, 20, 10));
moel@220: v.Add(new Voltage("+12V", 6, 28, 5));
moel@220: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@220: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220: t.Add(new Temperature("CPU", 0));
moel@220: t.Add(new Temperature("Motherboard", 2));
moel@221: f.Add(new Fan("CPU Fan", 0));
moel@221: f.Add(new Fan("Chassis Fan", 1));
moel@220: break;
moel@220: default:
moel@220: v.Add(new Voltage("CPU VCore", 0));
moel@220: v.Add(new Voltage("Voltage #2", 1, true));
moel@220: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220: v.Add(new Voltage("Voltage #5", 4, true));
moel@220: v.Add(new Voltage("Voltage #6", 5, true));
moel@220: v.Add(new Voltage("Voltage #7", 6, true));
moel@220: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220: v.Add(new Voltage("Voltage #10", 9, true));
moel@220: t.Add(new Temperature("CPU", 0));
moel@220: t.Add(new Temperature("Auxiliary", 1));
moel@220: t.Add(new Temperature("System", 2));
moel@220: f.Add(new Fan("System Fan", 0));
moel@220: f.Add(new Fan("CPU Fan", 1));
moel@220: f.Add(new Fan("Auxiliary Fan", 2));
moel@220: f.Add(new Fan("CPU Fan #2", 3));
moel@220: f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220: break;
moel@220: } break;
moel@220: default:
moel@220: v.Add(new Voltage("CPU VCore", 0));
moel@220: v.Add(new Voltage("Voltage #2", 1, true));
moel@220: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@220: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@220: v.Add(new Voltage("Voltage #5", 4, true));
moel@220: v.Add(new Voltage("Voltage #6", 5, true));
moel@220: v.Add(new Voltage("Voltage #7", 6, true));
moel@220: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@220: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@220: v.Add(new Voltage("Voltage #10", 9, true));
moel@220: t.Add(new Temperature("CPU", 0));
moel@220: t.Add(new Temperature("Auxiliary", 1));
moel@220: t.Add(new Temperature("System", 2));
moel@220: f.Add(new Fan("System Fan", 0));
moel@220: f.Add(new Fan("CPU Fan", 1));
moel@220: f.Add(new Fan("Auxiliary Fan", 2));
moel@220: f.Add(new Fan("CPU Fan #2", 3));
moel@220: f.Add(new Fan("Auxiliary Fan #2", 4));
moel@220: break;
moel@220: }
moel@130: break;
moel@130: case Chip.W83627DHG:
moel@130: case Chip.W83627DHGP:
moel@130: case Chip.W83667HG:
moel@130: case Chip.W83667HGB:
moel@152: switch (manufacturer) {
moel@153: case Manufacturer.ASRock:
moel@153: switch (model) {
moel@168: case Model._880GMH_USB3: // W83627DHG-P
moel@153: v.Add(new Voltage("CPU VCore", 0));
moel@195: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195: v.Add(new Voltage("+5V", 5, 15, 7.5f));
moel@195: v.Add(new Voltage("+12V", 6, 56, 10));
moel@195: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153: t.Add(new Temperature("CPU", 0));
moel@153: t.Add(new Temperature("Motherboard", 2));
moel@153: f.Add(new Fan("Chassis Fan", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Power Fan", 2));
moel@153: break;
moel@153: default:
moel@153: v.Add(new Voltage("CPU VCore", 0));
moel@153: v.Add(new Voltage("Voltage #2", 1, true));
moel@195: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@153: v.Add(new Voltage("Voltage #5", 4, true));
moel@153: v.Add(new Voltage("Voltage #6", 5, true));
moel@153: v.Add(new Voltage("Voltage #7", 6, true));
moel@195: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@153: t.Add(new Temperature("CPU", 0));
moel@153: t.Add(new Temperature("Auxiliary", 1));
moel@153: t.Add(new Temperature("System", 2));
moel@153: f.Add(new Fan("System Fan", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Auxiliary Fan", 2));
moel@153: f.Add(new Fan("CPU Fan #2", 3));
moel@153: f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153: break;
moel@153: }
moel@153: break;
moel@152: case Manufacturer.ASUS:
moel@152: switch (model) {
moel@336: case Model.P6T: // W83667HG
moel@174: case Model.P6X58D_E: // W83667HG
moel@174: case Model.Rampage_II_GENE: // W83667HG
moel@152: v.Add(new Voltage("CPU VCore", 0));
moel@195: v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));
moel@195: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195: v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@174: t.Add(new Temperature("CPU", 0));
moel@174: t.Add(new Temperature("Motherboard", 2));
moel@174: f.Add(new Fan("Chassis Fan #1", 0));
moel@174: f.Add(new Fan("CPU Fan", 1));
moel@174: f.Add(new Fan("Power Fan", 2));
moel@174: f.Add(new Fan("Chassis Fan #2", 3));
moel@174: f.Add(new Fan("Chassis Fan #3", 4));
moel@174: break;
moel@174: case Model.Rampage_Extreme: // W83667HG
moel@174: v.Add(new Voltage("CPU VCore", 0));
moel@195: v.Add(new Voltage("+12V", 1, 12, 2));
moel@195: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@195: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@195: v.Add(new Voltage("+5V", 4, 15, 7.5f));
moel@195: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152: t.Add(new Temperature("CPU", 0));
moel@152: t.Add(new Temperature("Motherboard", 2));
moel@152: f.Add(new Fan("Chassis Fan #1", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Power Fan", 2));
moel@152: f.Add(new Fan("Chassis Fan #2", 3));
moel@152: f.Add(new Fan("Chassis Fan #3", 4));
moel@152: break;
moel@152: default:
moel@152: v.Add(new Voltage("CPU VCore", 0));
moel@152: v.Add(new Voltage("Voltage #2", 1, true));
moel@195: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152: v.Add(new Voltage("Voltage #5", 4, true));
moel@152: v.Add(new Voltage("Voltage #6", 5, true));
moel@152: v.Add(new Voltage("Voltage #7", 6, true));
moel@195: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152: t.Add(new Temperature("CPU", 0));
moel@152: t.Add(new Temperature("Auxiliary", 1));
moel@152: t.Add(new Temperature("System", 2));
moel@153: f.Add(new Fan("System Fan", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Auxiliary Fan", 2));
moel@153: f.Add(new Fan("CPU Fan #2", 3));
moel@153: f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152: break;
moel@152: }
moel@152: break;
moel@152: default:
moel@152: v.Add(new Voltage("CPU VCore", 0));
moel@152: v.Add(new Voltage("Voltage #2", 1, true));
moel@195: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@195: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@152: v.Add(new Voltage("Voltage #5", 4, true));
moel@152: v.Add(new Voltage("Voltage #6", 5, true));
moel@152: v.Add(new Voltage("Voltage #7", 6, true));
moel@195: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@195: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@152: t.Add(new Temperature("CPU", 0));
moel@152: t.Add(new Temperature("Auxiliary", 1));
moel@152: t.Add(new Temperature("System", 2));
moel@153: f.Add(new Fan("System Fan", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Auxiliary Fan", 2));
moel@153: f.Add(new Fan("CPU Fan #2", 3));
moel@153: f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152: break;
moel@152: }
moel@130: break;
moel@130: case Chip.W83627HF:
moel@130: case Chip.W83627THF:
moel@130: case Chip.W83687THF:
moel@130: v.Add(new Voltage("CPU VCore", 0));
moel@130: v.Add(new Voltage("Voltage #2", 1, true));
moel@130: v.Add(new Voltage("Voltage #3", 2, true));
moel@195: v.Add(new Voltage("AVCC", 3, 34, 51));
moel@130: v.Add(new Voltage("Voltage #5", 4, true));
moel@195: v.Add(new Voltage("5VSB", 5, 34, 51));
moel@130: v.Add(new Voltage("VBAT", 6));
moel@130: t.Add(new Temperature("CPU", 0));
moel@130: t.Add(new Temperature("Auxiliary", 1));
moel@130: t.Add(new Temperature("System", 2));
moel@153: f.Add(new Fan("System Fan", 0));
moel@153: f.Add(new Fan("CPU Fan", 1));
moel@153: f.Add(new Fan("Auxiliary Fan", 2));
moel@130: break;
moel@245: case Chip.NCT6771F:
moel@265: case Chip.NCT6776F:
moel@265: switch (manufacturer) {
moel@265: case Manufacturer.ASUS:
moel@265: switch (model) {
moel@312: case Model.P8P67: // NCT6776F
moel@311: case Model.P8P67_EVO: // NCT6776F
moel@265: case Model.P8P67_PRO: // NCT6776F
moel@265: v.Add(new Voltage("CPU VCore", 0));
moel@310: v.Add(new Voltage("+12V", 1, 11, 1));
moel@310: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@310: v.Add(new Voltage("+5V", 4, 12, 3));
moel@310: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@265: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@310: t.Add(new Temperature("CPU", 0));
moel@276: t.Add(new Temperature("Auxiliary", 2));
moel@310: t.Add(new Temperature("Motherboard", 3));
moel@310: f.Add(new Fan("Chassis Fan #1", 0));
moel@265: f.Add(new Fan("CPU Fan", 1));
moel@310: f.Add(new Fan("Power Fan", 2));
moel@310: f.Add(new Fan("Chassis Fan #2", 3));
moel@323: c.Add(new Ctrl("Chassis Fan #2", 0));
moel@323: c.Add(new Ctrl("CPU Fan", 1));
moel@323: c.Add(new Ctrl("Chassis Fan #1", 2));
moel@265: break;
moel@276: case Model.P8P67_M_PRO: // NCT6776F
moel@276: v.Add(new Voltage("CPU VCore", 0));
moel@276: v.Add(new Voltage("+12V", 1, 11, 1));
moel@276: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@310: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@276: v.Add(new Voltage("+5V", 4, 12, 3));
moel@276: v.Add(new Voltage("Voltage #6", 5, true));
moel@276: v.Add(new Voltage("Voltage #7", 6, true));
moel@276: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@276: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@276: t.Add(new Temperature("CPU", 0));
moel@276: t.Add(new Temperature("Motherboard", 3));
moel@276: f.Add(new Fan("Chassis Fan #1", 0));
moel@276: f.Add(new Fan("CPU Fan", 1));
moel@276: f.Add(new Fan("Chassis Fan #2", 2));
moel@276: f.Add(new Fan("Power Fan", 3));
moel@276: f.Add(new Fan("Auxiliary Fan", 4));
moel@276: break;
moel@337: case Model.P8Z68_V_PRO: // NCT6776F
moel@337: v.Add(new Voltage("CPU VCore", 0));
moel@337: v.Add(new Voltage("+12V", 1, 11, 1));
moel@337: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@337: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@337: v.Add(new Voltage("+5V", 4, 12, 3));
moel@337: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@337: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@337: t.Add(new Temperature("CPU", 0));
moel@337: t.Add(new Temperature("Auxiliary", 2));
moel@337: t.Add(new Temperature("Motherboard", 3));
moel@337: for (int i = 0; i < superIO.Fans.Length; i++)
moel@337: f.Add(new Fan("Fan #" + (i + 1), i));
moel@337: for (int i = 0; i < superIO.Controls.Length; i++)
moel@337: c.Add(new Ctrl("Fan #" + (i + 1), i));
moel@337: break;
moel@332: case Model.P9X79: // NCT6776F
moel@332: v.Add(new Voltage("CPU VCore", 0));
moel@332: v.Add(new Voltage("+12V", 1, 11, 1));
moel@332: v.Add(new Voltage("Analog +3.3V", 2, 34, 34));
moel@332: v.Add(new Voltage("+3.3V", 3, 34, 34));
moel@332: v.Add(new Voltage("+5V", 4, 12, 3));
moel@332: v.Add(new Voltage("Standby +3.3V", 7, 34, 34));
moel@332: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@332: t.Add(new Temperature("CPU", 0));
moel@332: t.Add(new Temperature("Motherboard", 3));
moel@332: for (int i = 0; i < superIO.Fans.Length; i++)
moel@332: f.Add(new Fan("Fan #" + (i + 1), i));
moel@332: break;
moel@265: default:
moel@265: v.Add(new Voltage("CPU VCore", 0));
moel@265: v.Add(new Voltage("Voltage #2", 1, true));
moel@265: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265: v.Add(new Voltage("Voltage #5", 4, true));
moel@265: v.Add(new Voltage("Voltage #6", 5, true));
moel@265: v.Add(new Voltage("Voltage #7", 6, true));
moel@265: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354: t.Add(new Temperature("CPU Core", 0));
moel@354: t.Add(new Temperature("Temperature #1", 1));
moel@354: t.Add(new Temperature("Temperature #2", 2));
moel@354: t.Add(new Temperature("Temperature #3", 3));
moel@265: for (int i = 0; i < superIO.Fans.Length; i++)
moel@265: f.Add(new Fan("Fan #" + (i + 1), i));
moel@265: break;
moel@265: }
moel@265: break;
moel@265: default:
moel@265: v.Add(new Voltage("CPU VCore", 0));
moel@265: v.Add(new Voltage("Voltage #2", 1, true));
moel@265: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@265: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@265: v.Add(new Voltage("Voltage #5", 4, true));
moel@265: v.Add(new Voltage("Voltage #6", 5, true));
moel@265: v.Add(new Voltage("Voltage #7", 6, true));
moel@265: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@265: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@354: t.Add(new Temperature("CPU Core", 0));
moel@354: t.Add(new Temperature("Temperature #1", 1));
moel@354: t.Add(new Temperature("Temperature #2", 2));
moel@354: t.Add(new Temperature("Temperature #3", 3));
moel@265: for (int i = 0; i < superIO.Fans.Length; i++)
moel@265: f.Add(new Fan("Fan #" + (i + 1), i));
moel@265: break;
moel@265: }
moel@245: break;
moel@356: case Chip.NCT6779D:
moel@359: switch (manufacturer) {
moel@359: case Manufacturer.ASUS:
moel@359: switch (model) {
moel@359: case Model.P8Z77_V:
moel@359: v.Add(new Voltage("CPU VCore", 0));
moel@359: v.Add(new Voltage("Voltage #2", 1, true));
moel@359: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359: v.Add(new Voltage("Voltage #5", 4, true));
moel@359: v.Add(new Voltage("Voltage #6", 5, true));
moel@359: v.Add(new Voltage("Voltage #7", 6, true));
moel@359: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359: v.Add(new Voltage("VTT", 9));
moel@359: v.Add(new Voltage("Voltage #11", 10, true));
moel@359: v.Add(new Voltage("Voltage #12", 11, true));
moel@359: v.Add(new Voltage("Voltage #13", 12, true));
moel@359: v.Add(new Voltage("Voltage #14", 13, true));
moel@359: v.Add(new Voltage("Voltage #15", 14, true));
moel@359: t.Add(new Temperature("CPU Core", 0));
moel@359: t.Add(new Temperature("Auxiliary", 1));
moel@359: t.Add(new Temperature("Motherboard", 2));
moel@359: f.Add(new Fan("Chassis Fan #1", 0));
moel@359: f.Add(new Fan("CPU Fan", 1));
moel@359: f.Add(new Fan("Chassis Fan #2", 2));
moel@359: f.Add(new Fan("Chassis Fan #3", 3));
moel@359: c.Add(new Ctrl("Chassis Fan #1", 0));
moel@359: c.Add(new Ctrl("CPU Fan", 1));
moel@359: c.Add(new Ctrl("Chassis Fan #2", 2));
moel@359: c.Add(new Ctrl("Chassis Fan #3", 3));
moel@359: break;
moel@368: default:
moel@368: v.Add(new Voltage("CPU VCore", 0));
moel@368: v.Add(new Voltage("Voltage #2", 1, true));
moel@368: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@368: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@368: v.Add(new Voltage("Voltage #5", 4, true));
moel@368: v.Add(new Voltage("Voltage #6", 5, true));
moel@368: v.Add(new Voltage("Voltage #7", 6, true));
moel@368: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@368: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@368: v.Add(new Voltage("VTT", 9));
moel@368: v.Add(new Voltage("Voltage #11", 10, true));
moel@368: v.Add(new Voltage("Voltage #12", 11, true));
moel@368: v.Add(new Voltage("Voltage #13", 12, true));
moel@368: v.Add(new Voltage("Voltage #14", 13, true));
moel@368: v.Add(new Voltage("Voltage #15", 14, true));
moel@368: t.Add(new Temperature("CPU Core", 0));
moel@368: t.Add(new Temperature("Temperature #1", 1));
moel@368: t.Add(new Temperature("Temperature #2", 2));
moel@368: t.Add(new Temperature("Temperature #3", 3));
moel@368: t.Add(new Temperature("Temperature #4", 4));
moel@368: t.Add(new Temperature("Temperature #5", 5));
moel@368: t.Add(new Temperature("Temperature #6", 6));
moel@368: for (int i = 0; i < superIO.Fans.Length; i++)
moel@368: f.Add(new Fan("Fan #" + (i + 1), i));
moel@368: for (int i = 0; i < superIO.Controls.Length; i++)
moel@368: c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@368: break;
moel@359: }
moel@359: break;
moel@359: default:
moel@359: v.Add(new Voltage("CPU VCore", 0));
moel@359: v.Add(new Voltage("Voltage #2", 1, true));
moel@359: v.Add(new Voltage("AVCC", 2, 34, 34));
moel@359: v.Add(new Voltage("3VCC", 3, 34, 34));
moel@359: v.Add(new Voltage("Voltage #5", 4, true));
moel@359: v.Add(new Voltage("Voltage #6", 5, true));
moel@359: v.Add(new Voltage("Voltage #7", 6, true));
moel@359: v.Add(new Voltage("3VSB", 7, 34, 34));
moel@359: v.Add(new Voltage("VBAT", 8, 34, 34));
moel@359: v.Add(new Voltage("VTT", 9));
moel@359: v.Add(new Voltage("Voltage #11", 10, true));
moel@359: v.Add(new Voltage("Voltage #12", 11, true));
moel@359: v.Add(new Voltage("Voltage #13", 12, true));
moel@359: v.Add(new Voltage("Voltage #14", 13, true));
moel@359: v.Add(new Voltage("Voltage #15", 14, true));
moel@359: t.Add(new Temperature("CPU Core", 0));
moel@359: t.Add(new Temperature("Temperature #1", 1));
moel@359: t.Add(new Temperature("Temperature #2", 2));
moel@359: t.Add(new Temperature("Temperature #3", 3));
moel@359: t.Add(new Temperature("Temperature #4", 4));
moel@359: t.Add(new Temperature("Temperature #5", 5));
moel@359: t.Add(new Temperature("Temperature #6", 6));
moel@359: for (int i = 0; i < superIO.Fans.Length; i++)
moel@359: f.Add(new Fan("Fan #" + (i + 1), i));
moel@359: for (int i = 0; i < superIO.Controls.Length; i++)
moel@359: c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@359: break;
moel@359: }
moel@356: break;
moel@130: default:
moel@130: for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130: v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130: for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130: t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130: for (int i = 0; i < superIO.Fans.Length; i++)
moel@130: f.Add(new Fan("Fan #" + (i + 1), i));
moel@323: for (int i = 0; i < superIO.Controls.Length; i++)
moel@323: c.Add(new Ctrl("Fan Control #" + (i + 1), i));
moel@130: break;
moel@130: }
moel@130:
moel@195: const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130: foreach (Voltage voltage in v)
moel@130: if (voltage.Index < superIO.Voltages.Length) {
moel@130: Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@195: voltage.Hidden, SensorType.Voltage, this, new [] {
moel@130: new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130: formula, voltage.Ri),
moel@130: new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130: formula, voltage.Rf),
moel@130: new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130: formula, voltage.Vf)
moel@165: }, settings);
moel@130: voltages.Add(sensor);
moel@130: }
moel@130:
moel@130: foreach (Temperature temperature in t)
moel@130: if (temperature.Index < superIO.Temperatures.Length) {
moel@134: Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@195: SensorType.Temperature, this, new [] {
moel@130: new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165: }, settings);
moel@130: temperatures.Add(sensor);
moel@130: }
moel@130:
moel@130: foreach (Fan fan in f)
moel@130: if (fan.Index < superIO.Fans.Length) {
moel@134: Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165: this, settings);
moel@130: fans.Add(sensor);
moel@130: }
moel@323:
moel@323: foreach (Ctrl ctrl in c) {
moel@323: int index = ctrl.Index;
moel@323: if (index < superIO.Controls.Length) {
moel@323: Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,
moel@323: this, settings);
moel@323: Control control = new Control(sensor, settings, 0, 100);
moel@323: control.ControlModeChanged += (cc) => {
moel@323: if (cc.ControlMode == ControlMode.Default) {
moel@323: superIO.SetControl(index, null);
moel@323: } else {
moel@323: superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323: }
moel@323: };
moel@323: control.SoftwareControlValueChanged += (cc) => {
moel@323: if (cc.ControlMode == ControlMode.Software)
moel@323: superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));
moel@323: };
moel@323: if (control.ControlMode == ControlMode.Software)
moel@323: superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));
moel@323: sensor.Control = control;
moel@323: controls.Add(sensor);
moel@323: }
moel@323: }
moel@130: }
moel@130:
moel@165: public override HardwareType HardwareType {
moel@165: get { return HardwareType.SuperIO; }
moel@130: }
moel@130:
moel@176: public override IHardware Parent {
moel@176: get { return mainboard; }
moel@176: }
moel@176:
moel@130:
moel@130: public override string GetReport() {
moel@130: return superIO.GetReport();
moel@130: }
moel@130:
moel@130: public override void Update() {
moel@130: superIO.Update();
moel@130:
moel@130: foreach (Sensor sensor in voltages) {
moel@228: float? value = readVoltage(sensor.Index);
moel@130: if (value.HasValue) {
moel@130: sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130: sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130: ActivateSensor(sensor);
moel@130: }
moel@130: }
moel@130:
moel@130: foreach (Sensor sensor in temperatures) {
moel@228: float? value = readTemperature(sensor.Index);
moel@130: if (value.HasValue) {
moel@130: sensor.Value = value + sensor.Parameters[0].Value;
moel@130: ActivateSensor(sensor);
moel@130: }
moel@130: }
moel@130:
moel@130: foreach (Sensor sensor in fans) {
moel@228: float? value = readFan(sensor.Index);
moel@130: if (value.HasValue) {
moel@130: sensor.Value = value;
moel@130: if (value.Value > 0)
moel@130: ActivateSensor(sensor);
moel@130: }
moel@130: }
moel@228:
moel@323: foreach (Sensor sensor in controls) {
moel@323: float? value = readControl(sensor.Index);
moel@323: if (value.HasValue) {
moel@323: sensor.Value = value;
moel@323: ActivateSensor(sensor);
moel@323: }
moel@323: }
moel@323:
moel@228: postUpdate();
moel@130: }
moel@130:
moel@323: public override void Close() {
moel@323: foreach (Sensor sensor in controls) {
moel@323: // restore all controls back to default
moel@323: superIO.SetControl(sensor.Index, null);
moel@323: }
moel@323: base.Close();
moel@323: }
moel@323:
moel@130: private class Voltage {
moel@130: public readonly string Name;
moel@130: public readonly int Index;
moel@130: public readonly float Ri;
moel@130: public readonly float Rf;
moel@130: public readonly float Vf;
moel@130: public readonly bool Hidden;
moel@130:
moel@202: public Voltage(string name, int index) :
moel@202: this(name, index, false) { }
moel@202:
moel@130: public Voltage(string name, int index, bool hidden) :
moel@130: this(name, index, 0, 1, 0, hidden) { }
moel@202:
moel@202: public Voltage(string name, int index, float ri, float rf) :
moel@202: this(name, index, ri, rf, 0, false) { }
moel@202:
moel@202: // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)
moel@202:
moel@195: public Voltage(string name, int index,
moel@202: float ri, float rf, float vf, bool hidden)
moel@195: {
moel@130: this.Name = name;
moel@130: this.Index = index;
moel@130: this.Ri = ri;
moel@130: this.Rf = rf;
moel@130: this.Vf = vf;
moel@130: this.Hidden = hidden;
moel@130: }
moel@130: }
moel@130:
moel@130: private class Temperature {
moel@130: public readonly string Name;
moel@130: public readonly int Index;
moel@130:
moel@167: public Temperature(string name, int index) {
moel@130: this.Name = name;
moel@130: this.Index = index;
moel@130: }
moel@130: }
moel@130:
moel@130: private class Fan {
moel@130: public readonly string Name;
moel@130: public readonly int Index;
moel@130:
moel@130: public Fan(string name, int index) {
moel@130: this.Name = name;
moel@130: this.Index = index;
moel@130: }
moel@130: }
moel@323:
moel@323: private class Ctrl {
moel@323: public readonly string Name;
moel@323: public readonly int Index;
moel@323:
moel@323: public Ctrl(string name, int index) {
moel@323: this.Name = name;
moel@323: this.Index = index;
moel@323: }
moel@323: }
moel@130: }
moel@130: }