moel@14: /*
moel@14:
moel@14: Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@14:
moel@14: The contents of this file are subject to the Mozilla Public License Version
moel@14: 1.1 (the "License"); you may not use this file except in compliance with
moel@14: the License. You may obtain a copy of the License at
moel@14:
moel@14: http://www.mozilla.org/MPL/
moel@14:
moel@14: Software distributed under the License is distributed on an "AS IS" basis,
moel@14: WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@14: for the specific language governing rights and limitations under the License.
moel@14:
moel@14: The Original Code is the Open Hardware Monitor code.
moel@14:
moel@14: The Initial Developer of the Original Code is
moel@14: Michael Möller <m.moeller@gmx.ch>.
moel@14: Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@14: the Initial Developer. All Rights Reserved.
moel@14:
moel@14: Contributor(s):
moel@14:
moel@14: Alternatively, the contents of this file may be used under the terms of
moel@14: either the GNU General Public License Version 2 or later (the "GPL"), or
moel@14: the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@14: in which case the provisions of the GPL or the LGPL are applicable instead
moel@14: of those above. If you wish to allow use of your version of this file only
moel@14: under the terms of either the GPL or the LGPL, and not to allow others to
moel@14: use your version of this file under the terms of the MPL, indicate your
moel@14: decision by deleting the provisions above and replace them with the notice
moel@14: and other provisions required by the GPL or the LGPL. If you do not delete
moel@14: the provisions above, a recipient may use your version of this file under
moel@14: the terms of any one of the MPL, the GPL or the LGPL.
moel@14:
moel@14: */
moel@14:
moel@14: using System;
moel@14: using System.Collections.Generic;
moel@14: using System.Drawing;
moel@24: using System.Diagnostics;
moel@14: using System.Text;
moel@14:
moel@14:
moel@14: namespace OpenHardwareMonitor.Hardware.CPU {
moel@31: public class AMD0FCPU : Hardware, IHardware {
moel@14:
moel@14: private string name;
moel@14: private Image icon;
moel@14:
moel@14: private uint pciAddress;
moel@14:
moel@77: private Sensor[] coreTemperatures;
moel@14:
moel@24: private Sensor totalLoad;
moel@24: private Sensor[] coreLoads;
moel@24:
moel@26: private CPULoad cpuLoad;
moel@14:
moel@14: private const ushort PCI_AMD_VENDOR_ID = 0x1022;
moel@14: private const ushort PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID = 0x1103;
moel@14: private const uint THERMTRIP_STATUS_REGISTER = 0xE4;
moel@50: private const byte THERM_SENSE_CORE_SEL_CPU0 = 0x4;
moel@14: private const byte THERM_SENSE_CORE_SEL_CPU1 = 0x0;
moel@14:
moel@90: public AMD0FCPU(CPUID[][] cpuid) {
moel@14:
moel@90: this.name = cpuid[0][0].Name;
moel@90: this.icon = Utilities.EmbeddedResources.GetImage("cpu.png");
moel@14:
moel@90: int coreCount = cpuid.Length;
moel@14:
moel@24: totalLoad = new Sensor("CPU Total", 0, SensorType.Load, this);
moel@26:
moel@77: float offset = -49.0f;
moel@63:
moel@63: // AM2+ 65nm +21 offset
moel@90: uint model = cpuid[0][0].Model;
moel@63: if (model >= 0x69 && model != 0xc1 && model != 0x6c && model != 0x7c)
moel@63: offset += 21;
moel@63:
moel@90: // check if processor supports a digital thermal sensor
moel@90: if (cpuid[0][0].ExtData.GetLength(0) > 7 &&
moel@90: (cpuid[0][0].ExtData[7, 3] & 1) != 0)
moel@90: {
moel@90: coreTemperatures = new Sensor[coreCount];
moel@90: for (int i = 0; i < coreCount; i++) {
moel@90: coreTemperatures[i] =
moel@90: new Sensor("Core #" + (i + 1), i, null, SensorType.Temperature,
moel@90: this, new ParameterDescription[] {
moel@90: new ParameterDescription("Offset",
moel@90: "Temperature offset of the thermal sensor.\n" +
moel@90: "Temperature = Value + Offset.", offset)
moel@63: });
moel@90: }
moel@90: } else {
moel@90: coreTemperatures = new Sensor[0];
moel@26: }
moel@24:
moel@90: coreLoads = new Sensor[coreCount];
moel@90: for (int i = 0; i < coreCount; i++)
moel@90: coreLoads[i] = new Sensor("Core #" + (i + 1), i + 1,
moel@90: SensorType.Load, this);
moel@90:
moel@90: cpuLoad = new CPULoad(cpuid);
moel@26: if (cpuLoad.IsAvailable) {
moel@26: foreach (Sensor sensor in coreLoads)
moel@26: ActivateSensor(sensor);
moel@26: ActivateSensor(totalLoad);
moel@26: }
moel@14:
moel@14: pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,
moel@14: PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID, 0);
moel@14:
moel@14: Update();
moel@14: }
moel@14:
moel@14: public string Name {
moel@14: get { return name; }
moel@14: }
moel@14:
moel@14: public string Identifier {
moel@14: get { return "/amdcpu/0"; }
moel@14: }
moel@14:
moel@14: public Image Icon {
moel@14: get { return icon; }
moel@14: }
moel@14:
moel@14: public string GetReport() {
moel@14: return null;
moel@14: }
moel@14:
moel@14: public void Update() {
moel@42: if (pciAddress != 0xFFFFFFFF) {
moel@42: for (uint i = 0; i < coreTemperatures.Length; i++) {
moel@42: if (WinRing0.WritePciConfigDwordEx(
moel@42: pciAddress, THERMTRIP_STATUS_REGISTER,
moel@42: i > 0 ? THERM_SENSE_CORE_SEL_CPU1 : THERM_SENSE_CORE_SEL_CPU0)) {
moel@42: uint value;
moel@42: if (WinRing0.ReadPciConfigDwordEx(
moel@42: pciAddress, THERMTRIP_STATUS_REGISTER, out value)) {
moel@63: coreTemperatures[i].Value = ((value >> 16) & 0xFF) +
moel@63: coreTemperatures[i].Parameters[0].Value;
moel@42: ActivateSensor(coreTemperatures[i]);
moel@42: } else {
moel@42: DeactivateSensor(coreTemperatures[i]);
moel@42: }
moel@24: }
moel@14: }
moel@24: }
moel@24:
moel@26: if (cpuLoad.IsAvailable) {
moel@26: cpuLoad.Update();
moel@26: for (int i = 0; i < coreLoads.Length; i++)
moel@26: coreLoads[i].Value = cpuLoad.GetCoreLoad(i);
moel@26: totalLoad.Value = cpuLoad.GetTotalLoad();
moel@25: }
moel@31: }
moel@14: }
moel@14: }