Changed the project files to Visual Studio 2010. Fixed some Code Analysis warnings.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
40 using System.Globalization;
43 namespace OpenHardwareMonitor.Hardware.LPC {
44 internal class F718XX : ISuperIO {
46 private ushort address;
49 private float?[] voltages;
50 private float?[] temperatures;
51 private float?[] fans;
54 private const byte ADDRESS_REGISTER_OFFSET = 0x05;
55 private const byte DATA_REGISTER_OFFSET = 0x06;
57 // Hardware Monitor Registers
58 private const byte VOLTAGE_BASE_REG = 0x20;
59 private const byte TEMPERATURE_CONFIG_REG = 0x69;
60 private const byte TEMPERATURE_BASE_REG = 0x70;
61 private byte[] FAN_TACHOMETER_REG = new byte[] { 0xA0, 0xB0, 0xC0, 0xD0 };
63 private byte ReadByte(byte register) {
64 WinRing0.WriteIoPortByte(
65 (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
66 return WinRing0.ReadIoPortByte((ushort)(address + DATA_REGISTER_OFFSET));
69 public F718XX(Chip chip, ushort address) {
70 this.address = address;
73 voltages = new float?[chip == Chip.F71858 ? 3 : 9];
74 temperatures = new float?[3];
75 fans = new float?[chip == Chip.F71882 || chip == Chip.F71858? 4 : 3];
78 public Chip Chip { get { return chip; } }
79 public float?[] Voltages { get { return voltages; } }
80 public float?[] Temperatures { get { return temperatures; } }
81 public float?[] Fans { get { return fans; } }
83 public string GetReport() {
84 StringBuilder r = new StringBuilder();
86 r.AppendLine("LPC " + this.GetType().Name);
88 r.Append("Base Adress: 0x");
89 r.AppendLine(address.ToString("X4", CultureInfo.InvariantCulture));
92 if (!WinRing0.WaitIsaBusMutex(100))
95 r.AppendLine("Hardware Monitor Registers");
97 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
99 for (int i = 0; i <= 0xF; i++) {
101 r.Append((i << 4).ToString("X2", CultureInfo.InvariantCulture));
103 for (int j = 0; j <= 0xF; j++) {
105 r.Append(ReadByte((byte)((i << 4) | j)).ToString("X2",
106 CultureInfo.InvariantCulture));
112 WinRing0.ReleaseIsaBusMutex();
117 public void Update() {
118 if (!WinRing0.WaitIsaBusMutex(10))
121 for (int i = 0; i < voltages.Length; i++) {
122 int value = ReadByte((byte)(VOLTAGE_BASE_REG + i));
123 voltages[i] = 0.008f * value;
126 for (int i = 0; i < temperatures.Length; i++) {
129 int tableMode = 0x3 & ReadByte((byte)(TEMPERATURE_CONFIG_REG));
131 ReadByte((byte)(TEMPERATURE_BASE_REG + 2 * i));
133 ReadByte((byte)(TEMPERATURE_BASE_REG + 2 * i + 1));
134 if (high != 0xbb && high != 0xcc) {
137 case 0: bits = 0; break;
138 case 1: bits = 0; break;
139 case 2: bits = (high & 0x80) << 8; break;
140 case 3: bits = (low & 0x01) << 15; break;
143 bits |= (low & 0xe0) >> 1;
144 short value = (short)(bits & 0xfff0);
145 temperatures[i] = value / 128.0f;
147 temperatures[i] = null;
151 sbyte value = (sbyte)ReadByte((byte)(
152 TEMPERATURE_BASE_REG + 2 * (i + 1)));
153 if (value < sbyte.MaxValue && value > 0)
154 temperatures[i] = value;
156 temperatures[i] = null;
161 for (int i = 0; i < fans.Length; i++) {
162 int value = ReadByte(FAN_TACHOMETER_REG[i]) << 8;
163 value |= ReadByte((byte)(FAN_TACHOMETER_REG[i] + 1));
166 fans[i] = (value < 0x0fff) ? 1.5e6f / value : 0;
171 WinRing0.ReleaseIsaBusMutex();