ITE IT87XX family renamed.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
43 namespace OpenHardwareMonitor.Hardware.LPC {
44 public class IT87XX : IHardware {
49 private bool available = false;
51 private ushort address;
53 private Sensor[] temperatures;
54 private Sensor[] fans;
55 private Sensor[] voltages;
56 private List<ISensor> active = new List<ISensor>();
57 private float[] voltageGains;
60 private const byte ITE_VENDOR_ID = 0x90;
62 // Environment Controller
63 private const byte ADDRESS_REGISTER_OFFSET = 0x05;
64 private const byte DATA_REGISTER_OFFSET = 0x06;
66 // Environment Controller Registers
67 private const byte CONFIGURATION_REGISTER = 0x00;
68 private const byte TEMPERATURE_BASE_REG = 0x29;
69 private const byte VENDOR_ID_REGISTER = 0x58;
70 private const byte FAN_TACHOMETER_16_BIT_ENABLE_REGISTER = 0x0c;
71 private byte[] FAN_TACHOMETER_REG =
72 new byte[] { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
73 private byte[] FAN_TACHOMETER_EXT_REG =
74 new byte[] { 0x18, 0x19, 0x1a, 0x81, 0x83 };
75 private const byte VOLTAGE_BASE_REG = 0x20;
77 private byte ReadByte(byte register) {
78 WinRing0.WriteIoPortByte(
79 (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
80 return WinRing0.ReadIoPortByte((ushort)(address + DATA_REGISTER_OFFSET));
83 public IT87XX(Chip chip, ushort address) {
86 this.address = address;
89 case Chip.IT8716F: name = "ITE IT8716F"; break;
90 case Chip.IT8718F: name = "ITE IT8718F"; break;
91 case Chip.IT8720F: name = "ITE IT8720F"; break;
92 case Chip.IT8726F: name = "ITE IT8726F"; break;
97 byte vendorId = ReadByte(VENDOR_ID_REGISTER);
98 if (vendorId != ITE_VENDOR_ID)
101 // Bit 0x10 of the configuration register should always be 1
102 if ((ReadByte(CONFIGURATION_REGISTER) & 0x10) == 0)
105 temperatures = new Sensor[3];
106 for (int i = 0; i < temperatures.Length; i++)
107 temperatures[i] = new Sensor("Temperature #" + (i + 1), i,
108 SensorType.Temperature, this);
110 fans = new Sensor[5];
111 for (int i = 0; i < fans.Length; i++)
112 fans[i] = new Sensor("Fan #" + (i + 1), i, SensorType.Fan, this);
114 voltageGains = new float[] {
115 1, 1, 1, (6.8f / 10 + 1), 1, 1, 1, 1, 1 };
117 voltages = new Sensor[2];
118 voltages[0] = new Sensor("CPU VCore", 0, SensorType.Voltage, this);
119 voltages[1] = new Sensor("Battery", 8, SensorType.Voltage, this);
122 icon = Utilities.EmbeddedResources.GetImage("chip.png");
125 public bool IsAvailable {
126 get { return available; }
133 public string Identifier {
134 get { return "/lpc/" + chip.ToString().ToLower(); }
141 public ISensor[] Sensors {
142 get { return active.ToArray(); }
145 public string GetReport() {
146 StringBuilder r = new StringBuilder();
148 r.AppendLine("LPC IT87XX");
150 r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
151 r.Append("Chip Name: "); r.AppendLine(name);
152 r.Append("Base Address: 0x"); r.AppendLine(address.ToString("X4"));
154 r.AppendLine("Environment Controller Registers");
157 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
159 for (int i = 0; i <= 0xA; i++) {
160 r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append(" ");
161 for (int j = 0; j <= 0xF; j++) {
163 r.Append(ReadByte((byte)((i << 4) | j)).ToString("X2"));
172 public void Update() {
174 foreach (Sensor sensor in voltages) {
175 int value = ReadByte((byte)(VOLTAGE_BASE_REG + sensor.Index));
176 sensor.Value = voltageGains[sensor.Index] * 0.001f * (value << 4);
177 if (sensor.Value > 0)
178 ActivateSensor(sensor);
180 DeactivateSensor(sensor);
183 foreach (Sensor sensor in temperatures) {
184 sbyte value = (sbyte)ReadByte((byte)(TEMPERATURE_BASE_REG + sensor.Index));
185 sensor.Value = value;
186 if (value < sbyte.MaxValue && value > 0)
187 ActivateSensor(sensor);
189 DeactivateSensor(sensor);
192 foreach (Sensor sensor in fans) {
193 int value = ReadByte(FAN_TACHOMETER_REG[sensor.Index]);
194 value |= ReadByte(FAN_TACHOMETER_EXT_REG[sensor.Index]) << 8;
197 sensor.Value = (value < 0xffff) ? 1.35e6f / ((value) * 2) : 0;
198 ActivateSensor(sensor);
200 DeactivateSensor(sensor);
205 private void ActivateSensor(Sensor sensor) {
206 if (!active.Contains(sensor)) {
208 if (SensorAdded != null)
213 private void DeactivateSensor(Sensor sensor) {
214 if (active.Contains(sensor)) {
215 active.Remove(sensor);
216 if (SensorRemoved != null)
217 SensorRemoved(sensor);
221 public event SensorEventHandler SensorAdded;
222 public event SensorEventHandler SensorRemoved;